#-*- mode: makefile; tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
# $NetBSD: $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
#
# Please view me with 4 column tabs!
# This is the master file for the most common elements to all port
# Makefile in the ports system. For a more general overview of its
# use and importance, see the Porter's Handbook.
# There are two different types of "maintainers" in the ports framework.
# The maintainer alias of the bsd.port.mk file is listed below in the
# FreeBSD_MAINTAINER entry. You should consult them if you have any
# questions/suggestions regarding this file.
#
# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET
# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL
# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED!
FreeBSD_MAINTAINER= portmgr@FreeBSD.org
# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port. By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org
# mailing list, and any correspondence should be directed there.
#
# MAINTAINER - The e-mail address of the contact person for this port.
# Default: ports@FreeBSD.org
#
# These are meta-variables that are automatically set to the system
# you are running on. These are provided in case you need to take
# different actions for different values.
#
# ARCH - The architecture of the target machine, such as would be
# returned by "uname -p". (Note: Ports should test against
# ARCH, and not the host machine's architecture which is
# MACHINE_ARCH, to enable ports to be cross-built.)
# OPSYS - Portability clause. This is the operating system the
# makefile is being used on. Automatically set to
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# OSREL - The release version (numeric) of the operating system.
# OSVERSION - The value of __FreeBSD_version.
#
# This is the beginning of the list of all variables that need to be
# defined in a port, listed in order that they should be included
# to fit in with existing conventions. (Exception: MAINTAINER actually
# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP).
#
# These variables are used to identify your port.
#
# PORTNAME - Name of software. Mandatory.
# PORTVERSION - Version of software. Mandatory when no DISTVERSION is given.
# PORTREVISION - Version of port. Optional. Commonly used to indicate
# that an update has happened that affects the port
# framework itself, but not the distributed software
# (e.g., local patches or Makefile changes).
# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic
# can be fooled by ports that appear to go backwards
# numerically (e.g. if port-0.3 is newer than port-1998).
# In this case, incrementing PORTEPOCH forces the revision.
# Default: 0 (no effect).
# PKGNAME - Always defined as
# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
# Do not define this in your Makefile.
# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc.
# Optional.
# PKGNAMESUFFIX - Suffix to specify compilation options. Optional.
# PKGVERSION - Always defined as
# ${PORTVERSION}.
# Do not define this in your Makefile.
# UNIQUENAME - A name for your port that is globally unique. By default,
# this is set to ${LATEST_LINK} when LATEST_LINK is set,
# and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
# DISTVERSION - Vendor version of the distribution.
# Default: ${PORTVERSION}
# DISTNAME - Name of port or distribution used in generating
# WRKSRC and DISTFILES below.
# Default:
# ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX}
# CATEGORIES - A list of descriptive categories into which this port falls.
# Mandatory.
#
# These variable describe how to fetch files required for building the port.
#
# DISTFILES - Name(s) of archive file(s) containing distribution.
# Set this to an empty string if the port doesn't require it.
# Default: ${DISTNAME}${EXTRACT_SUFX}
# EXTRACT_SUFX - Suffix for archive names
# You never have to set both DISTFILES and EXTRACT_SUFX.
# Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is
# set, .tar.xz if USE_XZ is set, .run if USE_MAKESELF is set,
# .tar.gz otherwise).
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally. See bsd.sites.mk for common choices for
# MASTER_SITES.
# MASTER_SITE_SUBDIR
# - Subdirectory of MASTER_SITES. Will sometimes need to be
# set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE.
# Only guaranteed to work for choices of ${MASTER_SITES}
# defined in bsd.sites.mk.
# Default: not set.
# PATCHFILES - Name(s) of additional files that contain distribution
# patches. Make will look for them at PATCH_SITES (see below).
# They will automatically be uncompressed before patching if
# the names end with ".gz", ".bz2" or ".Z".
# Default: not set.
# PATCH_SITES - Primary location(s) for distribution patch files
# if not found locally.
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and
# ${PATCHFILES} will be put in this subdirectory of
# ${DISTDIR} (see below). Also they will be fetched in this
# subdirectory from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES - If set, don't perform checksum checks on these files.
# NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES}
# or ${MASTER_SITE_BACKUP} (but do from
# ${MASTER_SITE_OVERRIDE})
# EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to
# actually extract.
# ALWAYS_KEEP_DISTFILES
# - If set, the package building cluster will save the distfiles
# along with the packages. This may be required to comply with
# some licenses, e.g. GPL in some cases.
# Default: not set.
#
# (NOTE: by convention, the MAINTAINER entry (see above) should go here.)
#
# These variables are typically set in /etc/make.conf to indicate
# the user's preferred location to fetch files from. You should
# rarely need to set these.
#
# MASTER_SITE_BACKUP
# - Backup location(s) for distribution files and patch
# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
# Default:
# ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
# MASTER_SITE_OVERRIDE
# - If set, override the MASTER_SITES setting with this
# value.
# MASTER_SITE_FREEBSD
# - If set, only use ${MASTER_SITE_BACKUP} for
# MASTER_SITES.
# CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under.
# This variable supercedes CD_MOUNTPT, which is
# obsolete.
#
# Set these if your port should not be built under certain circumstances.
# These are string variables; you should set them to the reason why
# they are necessary.
#
# RESTRICTED - Prevent the distribution of distfiles and packages to
# the FTP sites or on CDROM (e.g. forbidden by license
# considerations).
# NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must
# not be re-sold) but can go on FTP sites.
# NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs,
# but distfiles can be put on ftp sites and CDROMs.
# FORBIDDEN - Package build should not be attempted because of
# security vulnerabilities.
# IGNORE - Package build should be skipped entirely (e.g.
# because of serious unfixable problems in the build,
# because it cannot be manually fetched, etc). Error
# logs will not appear on pointyhat, so this should be
# used sparingly.
# BROKEN - Port is believed to be broken. Package builds will
# still be attempted on the pointyhat package cluster to
# test this assumption.
# DEPRECATED - Port is deprecated to install. Advisory only.
# EXPIRATION_DATE
# - If DEPRECATED is set, determines a date when
# the port is planed to remove. The date format is
# ISO 8601 (YYYY-MM-DD).
#
# DISABLE_VULNERABILITIES
# - If set, do not check if the port is listed in the
# vulnerabilities database.
#
# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
# or patchfiles have redistribution restrictions, set the following
# to the list of such files.
#
# RESTRICTED_FILES
# - List of files that cannot be redistributed.
# Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
# or NO_CDROM is set, empty otherwise.
#
# These variables are booleans, so you don't need to set them to the reason.
#
# IS_INTERACTIVE
# - Set this if your port needs to interact with the user
# during any step in a package build. User can then decide
# to skip this port by setting ${BATCH}, or compiling only
# the interactive ports by setting ${INTERACTIVE}.
# Default: not set.
# USE_SUBMAKE - Set this if you want that each of the port's main 6 targets
# (extract, patch, configure, build, install and package) to be
# executed in a separate make(1) process. Useful when one of
# the stages needs to influence make(1) variables of the later
# stages using ${WRKDIR}/Makefile.inc generated on the fly.
# Default: not set.
#
# Set these if your port only makes sense to certain architectures.
# They are lists containing names for them (e.g., "alpha i386").
# (Defaults: not set.)
#
# ONLY_FOR_ARCHS
# - Only build ports if ${ARCH} matches one of these.
# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these.
# ONLY_FOR_ARCHS_REASON
# ONLY_FOR_ARCHS_REASON_${ARCH}
# - Reason why it's only for ${ONLY_FOR_ARCHS}s
# NOT_FOR_ARCHS_REASON
# NOT_FOR_ARCHS_REASON_${ARCH}
# - Reason why it's not for ${NOT_FOR_ARCHS}s
# IA32_BINARY_PORT
# - Set this instead of ONLY_FOR_ARCHS if the given port
# fetches and installs compiled i386 binaries.
#
# Dependency checking. Use these if your port requires another port
# not in the list below. (Default: empty.)
#
# EXTRACT_DEPENDS
# - A list of "path:dir[:target]" tuples of other ports this
# package depends on in the "extract" stage. "path" is
# the name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the existence
# (if it is a full pathname) or search for it in your
# $PATH (if it is an executable) and go into "dir" to do
# a "make all install" if it's not found. If the third
# field ("target") exists, it will be used instead of
# ${DEPENDS_TARGET}.
# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends on in the "patch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the existence
# (if it is a full pathname) or search for it in your
# $PATH (if it is an executable) and go into "dir" to do
# a "make all install" if it's not found. If the third
# field ("target") exists, it will be used instead of
# ${DEPENDS_TARGET}.
# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in your $PATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
# found. If the third field ("target") exists, it will
# be used instead of ${DEPENDS_TARGET}.
# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
# same as FETCH_DEPENDS. If the third field ("target")
# exists, it will be used instead of ${DEPENDS_TARGET}.
# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
# be put into the package as well. If the third field
# ("target") exists, it will be used instead of
# ${DEPENDS_TARGET}.
# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
# package depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the library.
# lib can contain extended regular expressions.
# DEPENDS_TARGET
# - The default target to execute when a port is calling a
# dependency.
# Default: install
#
# These variables control options about how a port gets built and/or
# are shorthand notations for common sets of dependencies.
# Use these if your port uses some of the common software packages. By
# convention these should be set to 'yes', although they only need to be
# defined. Defaults: not set, unless explicitly indicated below.
#
# Note: the distinction between the USE_* and WANT_* variables, and the
# WITH_* and WITHOUT_* variables, are that the former are restricted to
# usage inside the ports framework, and the latter are reserved for user-
# settable options. (Setting USE_* in /etc/make.conf is always wrong).
#
# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the
# binaries don't get stripped by INSTALL_PROGRAM or
# INSTALL_LIB. Besides, individual ports might
# add their specific to produce binaries for debugging
# purposes. You can override the debug flags that are
# passed to the compiler by setting DEBUG_FLAGS. It is
# set to "-g" at default.
#
# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for
# compression.
# USE_XZ - If set, this port tarballs use xz (or lzma)
# for compression
# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip
# for compression.
# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip
# for compression.
# USE_DOS2UNIX - If set to "YES", remove the ^M from all files
# under ${WRKSRC}. If set to a string, remove in all
# files under ${WRKSRC} with one of these names the ^Ms.
# DOS2UNIX_REGEX
# - Limit the ^M removal to files which name matches
# the regular expression.
# USE_GCC - If set, this port requires this version of gcc, either in
# the system or installed from a port.
# USE_CSTD - Override the default C language standard (gnu89, gnu99)
# USE_BINUTILS - Use binutils suite from port instead of the version in base.
# USE_GMAKE - If set, this port uses gmake.
# GMAKE - Set to path of GNU make if not in $PATH.
# Default: gmake
##
# USE_ICONV - If set, this port uses libiconv.
# USE_GETTEXT - The port uses GNU gettext (libintl).
# 'build' as a build-time dependency
# 'yes' as a library dependency
# 'run' as a run-time dependency
##
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
# patch, build, install or run phases.
# USE_PERL5_BUILD
# - If set, this port uses perl5 in one or more of the extract,
# patch, build or install phases.
# USE_PERL5_RUN - If set, this port uses perl5 for running.
# PERL5 - Set to full path of perl5, either in the system or
# installed from a port.
# PERL - Set to full path of perl5, either in the system or
# installed from a port, but without the version number.
# Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION - Full version of perl5 (see below for current value).
# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
# M is major version, N is minor version, and P is
# the patch level. E.g., PERL_VERSION=5.8.1 would give
# a PERL_LEVEL of 500801. This can be used in comparisons
# to determine if the version of perl is high enough,
# whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
# (value: ${ARCH}-freebsd).
# PERL_PORT - Name of the perl port that is installed
# (value: perl5)
# SITE_PERL - Directory name where site specific perl packages go.
# This value is added to PLIST_SUB.
# PERL_MODBUILD - Use Module::Build to configure, build and install port.
##
# USE_GHOSTSCRIPT
# - If set, this port needs ghostscript to both
# build and run. If a number is specified,
# the specified version will be used.
# The valid value is '7' or '8' in that case.
# USE_GHOSTSCRIPT_BUILD
# - If set, this port needs ghostscript to build.
# USE_GHOSTSCRIPT_RUN
# - If set, this port needs ghostscript to run.
# GHOSTSCRIPT_PORT
# - The port that provides postscript functionality.
# Some installations may wish to override the default
# to specify a version without X11 and/or localized
# versions for their nationality.
# Default: print/ghostscript8
# WITH_GHOSTSCRIPT_VER
# - If set, the specified version of ghostscript will be
# used. The valid value is "7" or "8". Note that
# this is for users, not for port maintainers. This
# should not be used in Makefile.
##
# USE_BISON - Implies that the port uses bison in one way or another:
# 'yes' (backwards compatibility) - use bison for building
# new features: 'build', 'run', 'both', implying build,
# runtime, and both build/run dependencies
##
# USE_IMAKE - If set, this port uses imake.
# XMKMF - Set to path of `xmkmf' if not in $PATH
# Default: xmkmf -a
# USE_XLIB - If set, this port uses the X libraries. In the USE_LINUX
# case the linux X libraries are referenced.
# USE_DISPLAY - If set, this ports requires a (virtual) X11 environment
# setup. If the environment variable DISPLAY Is not set,
# then an extra build dependency on Xvfb is added. Further,
# if PACKAGE_BUILDING is not set, then CONFIGURE_ENV and
# MAKE_ENV are extended with a DISPLAY variable.
#
# USE_FREETYPE - If set, this port uses the freetype print libraries.
# USE_GL - A list of Mesa or GL related dependencies needed by the port.
# Supported components are: glut, glu, glw, gl and linux.
# If set to "yes", this is equivalent to "glu". Note that
# glew and glut depend on glu, glw and glu depend on gl.
# USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XORG+= xpm
# NO_OPENMOTIF - If set, this port uses a custom Motif toolkit
# instead of Openmotif.
# Used only when USE_MOTIF is set.
# WANT_LESSTIF - If set, this port uses Lesstif as Motif toolkit.
# Used only when USE_MOTIF is set. Implies
# NO_OPENMOTIF.
##
# USE_SDL - If set, this port uses the sdl libraries.
# See bsd.sdl.mk for more information.
##
# USE_OPENAL - If set, this port relies on the OpenAL package.
# Legal values are: al, soft, si, alut.
# If set to an unknown value, the port is marked broken.
# WANT_OPENAL - User-specific OpenAL wishes.
# Legal values are: soft, si. The default is soft.
##
# USE_OPENSSL - If set, this port relies on the OpenSSL package.
##
# USE_OPENLDAP - If set, this port uses the OpenLDAP libraries.
# Implies: WANT_OPENLDAP_VER?=24
# WANT_OPENLDAP_VER
# - Legal values are: 23, 24
# If set to an unknown value, the port is marked BROKEN.
# WANT_OPENLDAP_SASL
# - If set, the system should use OpenLDAP libraries
# with SASL support.
##
# USE_FAM - If set, this port uses the File Alteration Monitor.
#
# WANT_FAM_SYSTEM
# - Legal values are: gamin (default),fam
# If set to an unknown value, the port is marked IGNORE.
##
# USE_AUTOTOOLS - If set, this port uses various GNU autotools
# (libtool, autoconf, autoheader, automake et al.)
# See bsd.autotools.mk for more details.
##
# USE_SCONS - If set, this port uses the Python-based SCons build system
# See bsd.scons.mk for more details.
##
# USE_EFL - If set, this port use EFL libraries.
# Implies inclusion of bsd.efl.mk. (Also see
# that file for more information on USE_EFL_*).
# USE_FPC - If set, this port relies on the Free Pascal language.
# Implies inclusion of bsd.fpc.mk. (Also see
# that file for more information on WANT_FPC_*).
# USE_JAVA - If set, this port relies on the Java language.
# Implies inclusion of bsd.java.mk. (Also see
# that file for more information on USE_JAVA_*).
# USE_OCAML - If set, this port relies on the OCaml language.
# Implies inclusion of bsd.ocaml.mk. (Also see
# that file for more information on USE_OCAML*).
# USE_PYTHON - If set, this port relies on the Python language.
# Implies inclusion of bsd.python.mk. (Also see
# that file for more information on USE_PYTHON_*
# and USE_PYDISTUTILS).
# USE_R_MOD - If set, this port uses the Comprehensive R Archive Network.
# See bsd.cran.mk for more details.
# USE_RUBY - If set, this port relies on the Ruby language.
# Implies inclusion of bsd.ruby.mk. (Also see
# that file for more information on USE_RUBY_*).
# USE_GNUSTEP - If set, this port relies on the GNUstep system.
# Implies the inclusion of bsd.gnustep.mk.
# (Also see that file for more information on
# USE_GNUSTEP_*).
##
# USE_GECKO - If set, this port uses the Gecko/Mozilla product.
# See bsd.gecko.mk for more details.
##
# USE_GNOME - A list of the Gnome dependencies the port has (e.g.,
# glib12, gtk12). Implies that the port needs Gnome.
# Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk
# or http://www.FreeBSD.org/gnome/docs/porting.html
# for more details.
##
# USE_LUA - If set, this port uses the Lua library and related
# components. See bsd.lua.mk for more details.
##
# USE_WX - If set, this port uses the WxWidgets library and related
# components. See bsd.wx.mk for more details.
##
# USE_KDEBASE_VER - Set to 3 to use the KDE windowing system.
# Implies inclusion of bsd.kde.mk.
#
# USE_KDELIBS_VER - Set to 3 to use the KDE libraries.
# Implies inclusion of bsd.kde.mk.
#
# USE_KDE4 - A list of the KDE4 dependencies the port has (e.g.,
# kdelibs, kdebase). Implies that the port needs KDE.
# Implies inclusion of bsd.kde4.mk. See bsd.kde4.mk
# for more details.
#
# USE_QT_VER - Set to 3 or 4 to use the respective version
# of the QT libraries.
# Implies inclusion of bsd.kde.mk.
#
# USE_LINUX - Set to yes to say the port needs the default linux base port.
# Set to value <X>, if the port needs emulators/linux_base-<X>.
# If set to "7", a dependency is registered to emulators/linux_base.
# Implies appropriate settings for STRIP and STRIP_CMD.
# USE_LINUX_PREFIX
# - controls the action of PREFIX (see above). Only use this
# if the port is a linux infrastructure port (e.g. contains libs
# or a sound server which supports the FreeBSD native one),
# use the default or the X11 prefix if it's a leaf port
# (e.g. a game or program).
# Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined:
# - USE_LINUX=yes
# - appropriate invocation of the Linux ldconfig
# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux
# RPM ports.
# Implies inclusion of bsd.linux-rpm.mk.
#
# LINUX_OSRELEASE - Contains the value of compat.linux.osrelease sysctl.
# Will be used to distinguish which linux
# infrastructure ports should be used.
# Valid values: 2.4.2, 2.6.16.
# AUTOMATIC_PLIST
# - Set to yes to enable automatic packing list generation.
# Currently has no effect unless USE_LINUX_RPM is set.
#
# OVERRIDE_LINUX_BASE_PORT
# - This specifies the default linux base to use, for valid
# values have a look at the description of USE_LINUX. This is
# an user-only variable. Don't use it in any port, it's meant
# to be used in make.conf.
#
# LINUX_BASE_PORT
# - This is a read-only variable, it gets set to a value which is
# usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}).
# It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT.
##
# USE_XORG - Set to a list of X.org module dependencies.
# Implies inclusion of bsd.xorg.mk.
##
# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common
# routines found in /etc/rc.subr.
# If this is set to a list of files, these files will be
# automatically added to ${SUB_FILES}, some %%VAR%%'s will
# automatically be expanded, they will be installed in
# ${PREFIX}/etc/rc.d and added to the packing list.
# USE_RCORDER - List of rc.d startup scripts to be called early in the boot
# process. This acts exactly like USE_RC_SUBR except that
# scripts are installed in /etc/rc.d.
# Because local rc.d scripts are included in the base rcorder
# this option is not needed unless the port installs in the base.
##
# USE_APACHE - If set, this port relies on an apache webserver.
#
# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools.
#
# Conflict checking. Use if your port cannot be installed at the same time as
# another package.
#
# CONFLICTS - A list of package name patterns that the port conflicts
# with, separated by blanks. The names may include shell
# pattern meta-characters "*", "?", "[", "]", and "!".
# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
#
# Various directory definitions and variables to control them.
# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
#
# X11BASE - Where X11 ports install things.
# Default: ${LOCALBASE}
# LOCALBASE - Where non-X11 ports install things.
# Default: /usr/local
# LINUXBASE - Where Linux ports install things.
# Default: /compat/linux
# PREFIX - Where *this* port installs its files.
# Default: ${LINUXBASE} if USE_LINUX_PREFIX is set,
# otherwise ${LOCALBASE}
#
# IGNORE_PATH_CHECKS
# - There are some sanity checks against PREFIX.
# You can disable these checks with defining
# this variable, but this is not recommended!
# Only do this if you really know what you are
# doing. These sanity checks are the following:
# - PREFIX has to be an absolute path.
# - PREFIX can't have a trailing slash.
#
# MASTERDIR - Where the port finds patches, package files, etc. Define
# this is you have two or more ports that share most of the
# files.
# Default: ${.CURDIR}
# PORTSDIR - The root of the ports tree.
# Default: /usr/ports
# DISTDIR - Where to search for and store copies of original sources
# Default: ${PORTSDIR}/distfiles
# PACKAGES - A top level directory where all packages go (rather than
# going locally to each port).
# Default: ${PORTSDIR}/packages
# WRKDIRPREFIX - The place to root the temporary working directory
# hierarchy.
# Default: none
# WRKDIR - A temporary working directory that gets *clobbered* on clean
# Default: ${WRKDIRPREFIX}${.CURDIR}/work
# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
# unpacks to.
# Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set,
# in which case simply ${WRKDIR}
# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
# PATCHDIR - A directory containing any additional patches you made
# to port this software to FreeBSD.
# Default: ${MASTERDIR}/files
# SCRIPTDIR - A directory containing any auxiliary scripts
# Default: ${MASTERDIR}/scripts
# FILESDIR - A directory containing any miscellaneous additional files.
# Default: ${MASTERDIR}/files
# PKGDIR - A directory containing any package creation files.
# Default: ${MASTERDIR}
# UID_FILES - A list of files containing information about registered UIDs.
# Note that files have decreasing priority.
# GID_FILES - A list of files containing information about registered GIDs.
# Note that files have decreasing priority.
#
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
# INSTALL_PROGRAM
# - A command to install binary executables. (By
# default, also strips them, unless ${STRIP} is
# overridden to be the empty string).
# INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP.
# INSTALL_LIB - As INSTALL_DATA, but also strips the file.
# INSTALL_SCRIPT
# - A command to install executable scripts.
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages. May or not compress,
# depending on the value of MANCOMPRESSED (see below).
#
# Boolean to control whether manpages are installed.
#
# NO_INSTALL_MANPAGES
# - If set, this port doesn't want to install any manpages.
# Default: not set, i.e. manpages are installed by default.
#
# Set the following to specify all manpages that your port installs.
# These manpages will be automatically listed in ${PLIST}. Depending
# on the setting of NO_MANCOMPRESS, the make rules will compress the
# manpages for you.
#
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# MAN<sect>_<lang>
# - If your port does not install all man pages for all
# languages in MANLANG, language specific pages for
# a language can be specified with this. For example,
# if the port installs foo.1 in English, Japanese, and
# German, bar.1 in English only, and baz.3 in German
# only, set
# MANLANG= "" de ja
# MAN1= foo.1
# MAN1_EN= bar.1
# MAN3_DE= baz.3
# MLINKS - A list of <source, target> tuples for creating links
# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3"
# will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in
# appropriate directories. (Use this even if the port
# installs its own manpage links so they will show up
# correctly in ${PLIST}.)
# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}.
# Default: ${PREFIX}
# MAN<sect>PREFIX
# - If manual pages of some sections install in different
# locations than others, use these.
# Default: ${MANPREFIX}
# MANCOMPRESSED - This variable can take values "yes", "no" or
# "maybe". "yes" means manpages are installed
# compressed; "no" means they are not; "maybe" means
# it changes depending on the value of NO_MANCOMPRESS.
# Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES
# is not set, and "no" otherwise.
#
# Set the following to specify all .info files your port installs.
#
# INFO - A list of .info files (omitting the trailing ".info");
# only one entry per document! These files are listed in
# the path relative to ${INFO_PATH}.
# INFO_PATH - Path, where all .info files will be installed by your
# port, relative to ${PREFIX}
# Default: "share/info" if ${PREFIX} is equal to /usr
# and "info" otherwise.
#
# Set the following to specify all documentation your port installs into
# ${DOCSDIR}
#
# PORTDOCS - A list of files and directories relative to DOCSDIR.
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no documentation files are
# installed.
# Useful for dynamically generated documentation.
#
# Set the following to specify all documentation your port installs into
# ${EXAMPLESDIR}
#
# PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR.
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no examples files are
# installed.
# Useful for dynamically generated examples.
#
# Set the following to specify all documentation your port installs into
# ${DATADIR}
#
# PORTDATA - A list of files and directories relative to DATADIR.
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no data files are
# installed.
# Useful for dynamically generated data files.
#
# Default targets and their behaviors:
#
# fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
# port.
# fetch-list - Show list of commands to retrieve missing ${DISTFILES} and
# ${PATCHFILES} for this port.
# fetch-recursive
# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
# port and dependencies.
# fetch-recursive-list
# - Show list of commands to retrieve missing ${DISTFILES} and
# ${PATCHFILES} for this port and dependencies.
# fetch-required
# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
# port and dependencies.
# fetch-required-list
# - Show list of commands to retrieve missing ${DISTFILES} and
# ${PATCHFILES} for this port and dependencies.
# fetch-url-list
# - Show list of URLS to retrieve missing ${DISTFILES} and
# ${PATCHFILES} for this port.
# fetch-urlall-list
# - Show list of URLS to retrieve ${DISTFILES} and
# ${PATCHFILES} for this port.
#
# all-depends-list
# - Show all directories which are dependencies
# for this port.
# build-depends-list
# - Show all directories which are build-dependencies
# for this port.
# package-depends-list
# - Show all directories which are package-dependencies
# for this port. This is based upon the dependency
# tree as recorded in the Makefiles of the ports
# collection, not as recorded in the currently
# installed ports.
# actual-package-depends
# - Like package-depends-list but with the difference
# that the dependencies of the currently installed
# ports are used instead of the dependencies as
# recorded in the ports collection.
# run-depends-list
# - Show all directories which are run-dependencies
# for this port.
#
# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
# patch - Apply any provided patches to the source.
# configure - Runs either GNU configure, one or more local configure
# scripts or nothing, depending on what's available.
# build - Actually compile the sources.
# install - Install the results of a build.
# reinstall - Install the results of a build, ignoring "already installed"
# flag.
# deinstall - Remove the installation.
# deinstall-all - Remove all installations with the same PKGORIGIN.
# package - Create a package from an _installed_ port.
# package-recursive
# - Create a package for a port and _all_ of its dependencies.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
# give incorrect results if multiple patches deal with
# the same file.
# checksum - Use distinfo to ensure that your distfiles are valid.
# checksum-recursive
# - Run checksum in this port and all dependencies.
# makesum - Generate distinfo (only do this for your own ports!).
# clean - Remove ${WRKDIR} and other temporary files used for building.
# clean-depends - Do a "make clean" for all dependencies.
# config - Configure options for this port (using ${DIALOG}).
# Automatically run prior to extract, patch, configure, build,
# install, and package.
# config-recursive
# - Configure options for this port for a port and all its
# dependencies.
# showconfig - Display options config for this port.
# showconfig-recursive
# - Display options config for this port and all its
# dependencies.
# rmconfig - Remove the options config for this port.
# rmconfig-recursive
# - Remove the options config for this port and all its
# dependencies.
#
# Default sequence for "all" is:
#
# check-sanity fetch checksum extract patch configure build
#
# Please read the comments in the targets section below; you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
#
# Set these variables if your port doesn't need some of the steps.
# Note that there are no NO_PATCH or NO_CONFIGURE variables because
# those steps are empty by default. NO_EXTRACT is not allowed anymore
# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user
# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE.
#
# NO_BUILD - Use a dummy (do-nothing) build target.
# NO_INSTALL - Use a dummy (do-nothing) install target.
#
# Here are some variables used in various stages.
#
# For options:
# OPTIONS - List of what WITH_<option> options this port accept. The
# format is <option> "<description>" [on|off]
# Example:
# FLEXRESP "Flexible response to events" off
# which tell that an option WITH_FLEXRESP exists for this port,
# that by default it is not defined, and that the description to
# show to a user in the config dialog is "Flexible response to
# events". If you have more than one option, just chain them
# into a single variable. NOTE: To make options work, you need
# to include bsd.port.pre.mk before you start testing the
# WITH_xyz variables.
#
# For fetch:
#
# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH.
# Default: "/usr/bin/fetch"
# FETCH_ARGS - Arguments to ftp/http fetch command.
# Default: "-ApRr"
# FETCH_CMD - ftp/http fetch command.
# Default: ${FETCH_BINARY} ${FETCH_ARGS}
# FETCH_BEFORE_ARGS
# - Arguments to ${FETCH_CMD} before filename.
# Default: none
# FETCH_AFTER_ARGS
# - Arguments to ${FETCH_CMD} following filename.
# Default: none
# FETCH_ENV - Environment to pass to ${FETCH_CMD}.
# Default: none
# FETCH_REGET - Times to retry fetching of files on checksum errors.
# Default: 1
#
# For extract:
#
# EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2
# is set, "unzip" if USE_ZIP is set, "unmakeself" if
# USE_MAKESELF if set, "gzip" otherwise.
# EXTRACT_BEFORE_ARGS
# - Arguments to ${EXTRACT_CMD} before filename.
# Default: "-dc"
# EXTRACT_AFTER_ARGS
# - Arguments to ${EXTRACT_CMD} following filename.
# default: "| tar -xf -"
# EXTRACT_PRESERVE_OWNERSHIP
# - Normally, when run as "root", the extract stage will
# change the owner and group of all files under ${WRKDIR}
# to 0:0. Set this variable if you want to turn off this
# feature.
#
# For makesum:
#
# NO_SIZE - Don't record size data in distinfo, needed
# when the master site does not report file
# sizes, or when multiple valid versions of
# a distfile, having different sizes, exist.
#
# For patch:
#
# EXTRA_PATCHES - Define this variable if you have patches not in
# ${PATCHDIR}. This usually happens when you need to
# do some pre-processing before some distribution
# patches can be applied. In that case, fetch them as
# extra distfiles, put the processed results in
# ${WRKDIR}, then point EXTRA_PATCHES to them.
# The patches specified by this variable will be
# applied after the normal distribution patches but
# before those in ${PATCHDIR}.
# PATCH_WRKSRC - Directory to apply patches in.
# Default: ${WRKSRC}
#
# For configure:
#
# HAS_CONFIGURE - If set, this port has its own configure script. The
# configure stage will not do anything if this is not set.
# GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies
# HAS_CONFIGURE.
# PERL_CONFIGURE
# - Configure using Perl's MakeMaker. Implies USE_PERL5.
# CONFIGURE_WRKSRC
# - Directory to run configure in.
# Default: ${WRKSRC}
# CONFIGURE_SCRIPT
# - Name of configure script, relative to ${CONFIGURE_WRKSRC}.
# Default: "Makefile.PL" if PERL_CONFIGURE is set,
# "configure" otherwise.
# CONFIGURE_TARGET
# - The name of target to call when GNU_CONFIGURE is
# defined.
# Default: ${ARCH}-portbld-freebsd${OSREL}
# GNU_CONFIGURE_PREFIX
# - The directory passed as prefix to the configure script if
# GNU_CONFIGURE is set.
# Default: ${PREFIX}
# CONFIGURE_ARGS
# - Pass these args to configure if ${HAS_CONFIGURE} is set.
# Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH}
# --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if
# GNU_CONFIGURE is set, "CC=${CC} CCFLAGS=${CFLAGS}
# PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib
# INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set,
# empty otherwise.
# CONFIGURE_ENV - Pass these env (shell-like) to configure if
# ${HAS_CONFIGURE} is set.
# CONFIGURE_LOG - The name of configure log file. It will be printed to
# the screen if configure fails.
# Default: config.log
# CONFIGURE_FAIL_MESSAGE
# - A message displayed to users when configure
# fails (note: this assumes the do-configure
# target has not been overwritten). This message
# will be passed through /usr/bin/fmt before
# being shown to the user.
#
# For build and install:
#
# MAKEFILE - Name of the makefile.
# Default: Makefile
# ALL_TARGET - Default target for sub-make in build stage.
# Default: all
# BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}).
# MAKE_ENV - Additional environment vars passed to sub-make in build
# and install stages.
# Default: see below
# MAKE_ARGS - Any extra arguments to sub-make in build and install stages.
# Default: none
##
# MAKE_JOBS_SAFE
# - This port can safely be built on multiple cpus in parallel.
# The make will be invoked with -jX parameter where X equals
# number of cores present in the system.
# MAKE_JOBS_UNSAFE
# - Disallow multiple jobs even when user set a global override.
# To be used with known bad ports.
# DISABLE_MAKE_JOBS
# - Set to disable the multiple jobs feature. User settable.
# FORCE_MAKE_JOBS
# - Force all ports to be built with multiple jobs, except ports
# that are explicitly marked MAKE_JOBS_UNSAFE. User settable.
# MAKE_JOBS_NUMBER
# - Override the number of make jobs to be used. User settable.
#
# For install:
#
# INSTALL_TARGET
# - Default target for sub-make in install stage.
# Default: install
# INSTALL_WRKSRC
# - Directory to install from
# Default: ${WRKSRC}
# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
# the "install" target.
# MTREE_FILE - The name of the mtree file.
# Default: ${PORTSDIR}/Templates/BSD.local.dist or
# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr".
# PLIST_DIRS - Directories to be added to packing list
# PLIST_DIRSTRY - Directories to be added to packing list and try to remove them.
# PLIST_FILES - Files and symbolic links to be added to packing list
#
# PLIST - Name of the `packing list' file.
# Change this to ${WRKDIR}/PLIST or something if you
# need to write to it. (It is not a good idea for a port
# to write to any file outside ${WRKDIR} during a normal
# build.)
# Default: ${PKGDIR}/pkg-plist
# TMPPLIST - Name of the `packing list' file after processing
# Default: ${WRKDIR}/.PLIST.mktmp
# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
# Default: see below
#
# SUB_FILES - Files that should be passed through sed and redirected to
# ${WRKDIR}.
# - For each file specified in SUB_FILES, there must be a
# corresponding file in ${FILESDIR} whose suffix is ".in". For
# instance, if the Makefile specifies "SUB_FILES= pkg-message"
# then there must be a file called pkg-message.in in
# ${FILESDIR}.
# - The substitution process is the same as PLIST_FILES, as
# described below except that any line beginning with @comment
# is deleted.
# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES}
# Some pairs are added by default: eg. PREFIX=${PREFIX}
#
# USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of
# directories to be searched for shared libraries.
# Otherwise, this is a list of directories to be added to that
# list. The directory names are written to
# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then
# used by the ldconfig startup script.
# This mechanism replaces ldconfig scripts installed by some
# ports, often under such names as 000.${UNQUENAME}.sh.
# If USE_LINUX_PREFIX is defined, the Linux version of
# ldconfig will be used instead of the native FreeBSD
# version, and the directory list given will be ignored.
# USE_LDCONFIG32
# - Same as USE_LDCONFIG but the target file is
# ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead.
# Note: that should only be used on 64-bit architectures.
# NO_LDCONFIG_MTREE
# - Denotes whether the libdata/ldconfig directory is part of
# the mtree on a given OSVERSION system. If it is not, we
# create the directory, pull in the ldconfig_compat port,
# and clean up on de-installation. NOTE: this variable is
# internal to bsd.port.mk and must not be set in your Makefile.
#
# DOCSDIR - Name of the directory to install the packages docs in.
# Default: ${PREFIX}/share/doc/${PORTNAME}
# DOCSDIR_REL - The DOCSDIR relative to ${PREFIX}
# EXAMPLESDIR - Name of the directory to install the packages examples in.
# Default: ${PREFIX}/share/examples/${PORTNAME}
# EXAMPLESDIR_REL
# - The EXAMPLESDIR relative to ${PREFIX}
# DATADIR - Name of the directory to install the packages shared data in.
# Default: ${PREFIX}/share/${PORTNAME}
# DATADIR_REL - The DATADIR relative to ${PREFIX}
#
# WWWDIR - Name of the directory to install the packages www data in.
# Default: ${PREFIX}/www/${PORTNAME}
# WWWDIR_REL - The WWWDIR relative to ${PREFIX}
#
# USERS - List of users to create at install time. Each login must
# have a corresponding entry in ${UID_FILES}.
# GROUPS - List of groups to create at install time. Each group must
# have a corresponding entry in ${GID_FILES}.
#
# DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in.
# Default: ${PREFIX}/share/applications
# DESKTOP_ENTRIES
# - List of desktop entry files to generate and install in
# ${DESKTOPDIR}. The format is
# "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify
# Rules:
# * Only add desktop entries for applications which do not
# require a terminal (ie. X applications).
# * If the upstream distribution already installs .desktop
# files, you do not need to use this.
# * If you require a more elaborate .desktop file than this
# variable permits, write it yourself and install it
# in ${DESKTOPDIR}.
# Notes:
# * Comment and Icon may be empty strings (""). Categories
# may be an empty string in some cases (see below). The
# other fields are mandatory.
# * If Categories is an empty string, bsd.port.mk will try
# to deduce a default value using the CATEGORIES variable.
# If the deduction fails, you will have to set Categories
# manually. You should check the generated value using
# "make desktop-categories", and override it if necessary.
# * Exec will also be used to name the .desktop file.
# * The files will be automatically added to ${PLIST}.
# Example:
# "X Window Information" \
# "Get information about X windows" \
# "wininfo.png" \
# "wininfo" \
# "Application;System;" \
# true
# See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html
# for an explanation of the fields. If you need to create more
# than one file, just chain them into a single variable.
#
# Note that the install target will automatically add manpages (see
# above) and also substitute special sequences of characters (delimited
# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
# ${TMPPLIST} is generated before the do-install stage. If you are
# generating the packing list on-the-fly, make sure it's generated before
# do-install is called!
#
# For package:
#
# NO_LATEST_LINK
# - Do not install the "Latest" link for package. Define this
# if this port is a beta version of another stable port
# which is also in the tree.
# LATEST_LINK - Install the "Latest" link for the package as ___. Define
# this if the "Latest" link name will be incorrectly determined.
#
# This is used in all stages:
#
# SCRIPTS_ENV - Additional environment vars passed to scripts in
# ${SCRIPTDIR} executed by bsd.port.mk.
# Default: see below
#
# Finally, variables to change if you want a special behavior. These
# are for debugging purposes. Don't set them in your Makefile.
#
# ECHO_MSG - Used to print all the '===>' style prompts - override this
# to turn them off.
# Default: ${ECHO_CMD}
# PATCH_DEBUG - If set, print out more information about the patches as
# it attempts to apply them.
# PKG_DBDIR - Where package installation is recorded; this directory
# must not contain anything else.
# Default: /var/db/pkg
# PORT_DBDIR - Where port configuration options are recorded.
# Default: /var/db/ports
# NO_PKG_REGISTER
# - Don't register a port installation as a package.
# FORCE_PKG_REGISTER
# - If set, it will overwrite any existing package
# registration information in ${PKG_DBDIR}/${PKGNAME}.
# NO_DEPENDS - Don't verify build of dependencies.
# CHECKSUM_ALGORITHMS
# - Different checksum algorithms to check for verifying the
# integrity of the distfiles. The absence of the algorithm
# in distinfo doesn't make it fail.
# Default: sha256 (md5 is deprecated, allowed but unused)
# NO_CHECKSUM - Don't verify the checksum. Typically used when
# when you noticed the distfile you just fetched has
# a different checksum and you intend to verify if
# the port still works with it.
# USE_PACKAGE_DEPENDS
# - Install dependencies from existing packages instead
# of building the port from scratch.
# INSTALL_AS_USER
# - Define this to install as the current user, intended
# for systems where you have no root access.
# DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field
# has been specified in distinfo. This is useful
# when using an alternate FETCH_CMD.
#
# End of the list of all variables that need to be defined in a port.
# Most port authors should not need to understand anything after this point.
#
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
# by individual Makefiles or local system make configuration.
PORTSDIR?= /usr/ports
LOCALBASE?= /usr/local
X11BASE?= ${LOCALBASE}
LINUXBASE?= /compat/linux
DISTDIR?= ${PORTSDIR}/distfiles
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
INDEXDIR?= ${PORTSDIR}
.include "${PORTSDIR}/Mk/bsd.commands.mk"
#
# DESTDIR section to start a chrooted process if invoked with DESTDIR set
#
.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \
!defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
.include "${PORTSDIR}/Mk/bsd.destdir.mk"
.else
# Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create
# ${FILEDIR}/patch-* files from them.
.if !target(makepatch)
makepatch:
@cd ${.CURDIR} && ${MKDIR} ${FILESDIR}
@(cd ${PATCH_WRKSRC}; \
for i in `find . -type f -name '*.orig'`; do \
ORG=$$i; \
NEW=$${i%.orig}; \
OUT=${FILESDIR}`${ECHO} $${NEW} | \
${SED} -e 's|/|__|g' \
-e 's|^\.__|/patch-|'`; \
${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \
${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \
done \
)
.endif
# Start of options section
.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) )
.if defined(MAKE_VERSION)
.if ${MAKE_VERSION} >= 5200408030 || ${MAKE_VERSION} >= 4200408030 && ${MAKE_VERSION} < 5000000000
NOPRECIOUSSOFTMAKEVARS= yes
.endif
.endif
# Get the default maintainer
MAINTAINER?= ports@FreeBSD.org
# Get the architecture
.if !defined(ARCH)
ARCH!= ${UNAME} -p
.endif
# Kludge for pre-3.0 systems
MACHINE_ARCH?= i386
# Get the operating system type
.if !defined(OPSYS)
OPSYS!= ${UNAME} -s
.endif
# Get the operating system revision
.if !defined(OSREL)
OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//'
.endif
# Get __FreeBSD_version
.if !defined(OSVERSION)
.if exists(/usr/include/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
.elif exists(/usr/src/sys/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank::]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
.else
OSVERSION!= ${SYSCTL} -n kern.osreldate
.endif
.endif
MASTERDIR?= ${.CURDIR}
.if ${MASTERDIR} != ${.CURDIR}
SLAVE_PORT?= yes
MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/}
.else
SLAVE_PORT?= no
MASTER_PORT?=
.endif
# If they exist, include Makefile.inc, then architecture/operating
# system specific Makefiles, then local Makefile.local.
.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
USE_SUBMAKE= yes
.endif
.if exists(${MASTERDIR}/../Makefile.inc)
.include "${MASTERDIR}/../Makefile.inc"
USE_SUBMAKE= yes
.endif
.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
USE_SUBMAKE= yes
.elif exists(${MASTERDIR}/Makefile.${OPSYS})
.include "${MASTERDIR}/Makefile.${OPSYS}"
USE_SUBMAKE= yes
.elif exists(${MASTERDIR}/Makefile.${ARCH})
.include "${MASTERDIR}/Makefile.${ARCH}"
USE_SUBMAKE= yes
.endif
.if exists(${MASTERDIR}/Makefile.local)
.include "${MASTERDIR}/Makefile.local"
USE_SUBMAKE= yes
.endif
# where 'make config' records user configuration options
PORT_DBDIR?= /var/db/ports
UID_FILES?= ${PORTSDIR}/UIDs
GID_FILES?= ${PORTSDIR}/GIDs
UID_OFFSET?= 0
GID_OFFSET?= 0
LDCONFIG_DIR= libdata/ldconfig
LDCONFIG32_DIR= libdata/ldconfig32
.if defined(LATEST_LINK)
UNIQUENAME?= ${LATEST_LINK}
.else
UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME}
.endif
OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options
.if defined(OPTIONS)
# include OPTIONSFILE first if exists
. if exists(${OPTIONSFILE}) && !make(rmconfig)
. include "${OPTIONSFILE}"
. endif
. if exists(${OPTIONSFILE}.local)
. include "${OPTIONSFILE}.local"
. endif
WITHOUT:=
WITH:=
. if defined(OPTIONS)
REALOPTIONS=${OPTIONS:C/".*"//g}
. for O in ${REALOPTIONS}
RO:=${O}
. if ${RO:L} == off
WITHOUT:= ${WITHOUT} ${OPT}
. endif
. if ${RO:L} == on
WITH:= ${WITH} ${OPT}
. endif
OPT:=${RO}
. endfor
. endif
# define only if NO WITH/WITHOUT_${W} is defined
. for W in ${WITH}
. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
WITH_${W}:= true
. endif
. endfor
. for W in ${WITHOUT}
. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
WITHOUT_${W}:= true
. endif
. endfor
. undef WITH
. undef WITHOUT
. undef RO
. undef REALOPTIONS
.endif
.endif
DOS2UNIX_REGEX?= .*
# At least KDE needs TMPDIR for the package building,
# so we're setting it to the known default value.
.if defined(PACKAGE_BUILDING)
TMPDIR?= /tmp
.endif # defined(PACKAGE_BUILDING)
# Respect TMPDIR passed via make.conf or similar and pass it down
# to configure and make.
.if defined(TMPDIR)
MAKE_ENV+= TMPDIR="${TMPDIR}"
CONFIGURE_ENV+= TMPDIR="${TMPDIR}"
.endif # defined(TMPDIR)
# Start of pre-makefile section.
.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK)
.if defined(_PREMKINCLUDED)
check-makefile::
@${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.pre].mk twice"
@${FALSE}
.endif
_PREMKINCLUDED= yes
.if defined(PORTVERSION)
.if ${PORTVERSION:M*[-_,]*}x != x
IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ','
.endif
DISTVERSION?= ${PORTVERSION:S/:/::/g}
.elif defined(DISTVERSION)
PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
.endif
PORTREVISION?= 0
.if ${PORTREVISION} != 0
_SUF1= _${PORTREVISION}
.endif
PORTEPOCH?= 0
.if ${PORTEPOCH} != 0
_SUF2= ,${PORTEPOCH}
.endif
PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2}
PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION}
DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX}
INDEXFILE?= INDEX-${OSVERSION:C/([0-9]).*/\1/}
DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME}
EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME}
DATADIR?= ${PREFIX}/share/${PORTNAME}
WWWDIR?= ${PREFIX}/www/${PORTNAME}
ETCDIR?= ${PREFIX}/etc/${PORTNAME}
.if defined(USE_LINUX_RPM)
.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
.endif
.if defined(USE_LINUX_APPS)
.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
.endif
.if defined(X_WINDOW_SYSTEM) && ${X_WINDOW_SYSTEM:L} != "xorg"
IGNORE= cannot be installed: bad X_WINDOW_SYSTEM setting; valid value is 'xorg'
.endif
.if ${X11BASE} != ${LOCALBASE}
.BEGIN:
@${ECHO_MSG} "X11BASE is now deprecated. Unset X11BASE in make.conf and try again."
@${FALSE}
.endif
.if defined(USE_XORG) || defined(XORG_CAT)
.include "${PORTSDIR}/Mk/bsd.xorg.mk"
.endif
.if defined(USE_BZIP2)
EXTRACT_SUFX?= .tar.bz2
.elif defined(USE_ZIP)
EXTRACT_SUFX?= .zip
.elif defined(USE_XZ)
EXTRACT_SUFX?= .tar.xz
.elif defined(USE_MAKESELF)
EXTRACT_SUFX?= .run
.else
EXTRACT_SUFX?= .tar.gz
.endif
PACKAGES?= ${PORTSDIR}/packages
TEMPLATES?= ${PORTSDIR}/Templates
PATCHDIR?= ${MASTERDIR}/files
FILESDIR?= ${MASTERDIR}/files
SCRIPTDIR?= ${MASTERDIR}/scripts
PKGDIR?= ${MASTERDIR}
.if defined(USE_LINUX_PREFIX)
PREFIX?= ${LINUXBASE}
NO_MTREE= yes
.else
PREFIX?= ${LOCALBASE}
.endif
.if defined(USE_LINUX_PREFIX)
LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE}
.endif
PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg
# XXX to remain undefined until all ports that require Perl are fixed
# to set one of the conditionals that force the inclusion of bsd.perl.mk
.if !defined(_PERL_REFACTORING_COMPLETE)
PERL_VERSION?= 5.10.1
.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
perl_minor= ${_perl_minor:C|^.*(...)|\1|}
.if ${perl_minor} >= 100
perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
.else # ${perl_minor} < 100
_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
perl_patch= ${_perl_patch:C|^.*(..)|\1|}
.endif # ${perl_minor} < 100
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
.else
PERL_LEVEL=0
.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
PERL_ARCH?= mach
.if ${PERL_LEVEL} >= 501200
PERL_PORT?= perl5.12
.elif ${PERL_LEVEL} >= 501000
PERL_PORT?= perl5.10
.else
PERL_PORT?= perl5.8
.endif
SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VERSION}
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL= ${LOCALBASE}/bin/perl
.endif # !defined(_PERL_REFACTORING_COMPLETE)
.if defined(USE_LOCAL_MK)
.include "${PORTSDIR}/Mk/bsd.local.mk"
.endif
.if defined(USE_OPENSSL)
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
.endif
.if defined(USE_EMACS)
.include "${PORTSDIR}/Mk/bsd.emacs.mk"
.endif
.if defined(USE_GNUSTEP)
.include "${PORTSDIR}/Mk/bsd.gnustep.mk"
.endif
#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD)
.include "${PORTSDIR}/Mk/bsd.perl.mk"
#.endif
.if defined(USE_PHP)
.include "${PORTSDIR}/Mk/bsd.php.mk"
.endif
.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN)
.include "${PORTSDIR}/Mk/bsd.python.mk"
.endif
.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
.include "${PORTSDIR}/Mk/bsd.efl.mk"
.endif
.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
.include "${PORTSDIR}/Mk/bsd.fpc.mk"
.endif
.if defined(USE_JAVA)
.include "${PORTSDIR}/Mk/bsd.java.mk"
.endif
.if defined(USE_R_MOD)
.include "${PORTSDIR}/Mk/bsd.cran.mk"
.endif
.if defined(USE_RUBY) || defined(USE_LIBRUBY)
.include "${PORTSDIR}/Mk/bsd.ruby.mk"
.endif
.if defined(USE_OCAML)
.include "${PORTSDIR}/Mk/bsd.ocaml.mk"
.endif
.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER)
.include "${PORTSDIR}/Mk/bsd.tcl.mk"
.endif
.if defined(USE_APACHE)
.include "${PORTSDIR}/Mk/bsd.apache.mk"
.endif
.if (defined(USE_QT_VER) && ${USE_QT_VER:L} == 3) || defined(USE_KDELIBS_VER) || defined(USE_KDEBASE_VER)
.include "${PORTSDIR}/Mk/bsd.kde.mk"
.endif
.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
.include "${PORTSDIR}/Mk/bsd.qt.mk"
.endif
.if defined(WANT_GECKO) || defined(USE_GECKO)
.include "${PORTSDIR}/Mk/bsd.gecko.mk"
.endif
.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS)
.include "${PORTSDIR}/Mk/bsd.gnome.mk"
.endif
.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT)
.include "${PORTSDIR}/Mk/bsd.lua.mk"
.endif
.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT)
.include "${PORTSDIR}/Mk/bsd.wx.mk"
.endif
.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
.endif
.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined(USE_QMAIL_BUILD) || defined(WANT_QMAIL)
.include "${PORTSDIR}/Mk/bsd.mail.mk"
.endif
.if defined(USE_SDL) || defined(WANT_SDL)
.include "${PORTSDIR}/Mk/bsd.sdl.mk"
.endif
.if defined(USE_XFCE)
.include "${PORTSDIR}/Mk/bsd.xfce.mk"
.endif
.if defined(USE_KDE4) || defined(KDE4_BUILDENV)
.include "${PORTSDIR}/Mk/bsd.kde4.mk"
.endif
# You can force skipping these test by defining IGNORE_PATH_CHECKS
.if !defined(IGNORE_PATH_CHECKS)
.if (${PREFIX:C,(^.).*,\1,} != "/")
.BEGIN:
@${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'"
@${ECHO_MSG} "is invoked in the work area PREFIX points to the right place."
@${FALSE}
.endif
.endif
# Location of mounted CDROM(s) to search for files
CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT}
# Owner and group of the WWW user
WWWOWN?= www
WWWGRP?= www
.endif
# End of pre-makefile section.
# Start of post-makefile section.
.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
.if defined(_POSTMKINCLUDED)
check-makefile::
@${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice"
@${FALSE}
.endif
_POSTMKINCLUDED= yes
WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work
.if defined(NO_WRKSUBDIR)
WRKSRC?= ${WRKDIR}
.else
WRKSRC?= ${WRKDIR}/${DISTNAME}
.endif
PATCH_WRKSRC?= ${WRKSRC}
CONFIGURE_WRKSRC?= ${WRKSRC}
BUILD_WRKSRC?= ${WRKSRC}
INSTALL_WRKSRC?=${WRKSRC}
PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \
DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \
WWWDIR=${WWWDIR} ETCDIR=${ETCDIR}
PLIST_REINPLACE+= dirrmtry stopdaemon rmtry
PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir %D/\1 2>/dev/null || true!
PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true!
PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true!
# kludge to strip trailing whitespace from CFLAGS;
# sub-configure will not # survive double space
CFLAGS:= ${CFLAGS:C/ $//}
.if defined(WITHOUT_CPU_CFLAGS)
.if defined(_CPUCFLAGS)
.if !empty(_CPUCFLAGS)
CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//}
.endif
.endif
.endif
.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
STRIP= #none
STRIP_CMD= ${TRUE}
DEBUG_FLAGS?= -g
CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS}
.endif
.if defined(NOPORTDOCS)
PLIST_SUB+= PORTDOCS="@comment "
.else
PLIST_SUB+= PORTDOCS=""
.endif
.if defined(NOPORTEXAMPLES)
PLIST_SUB+= PORTEXAMPLES="@comment "
.else
PLIST_SUB+= PORTEXAMPLES=""
.endif
.if defined(NOPORTDATA)
PLIST_SUB+= PORTDATA="@comment "
.else
PLIST_SUB+= PORTDATA=""
.endif
CONFIGURE_SHELL?= ${SH}
MAKE_SHELL?= ${SH}
CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH}
MAKE_ENV+= SHELL=${SH} NO_LINT=YES
.if defined(MANCOMPRESSED)
.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
${MANCOMPRESSED} != maybe
check-makevars::
@${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
@${FALSE}
.endif
.endif
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
MANCOMPRESSED?= yes
.else
MANCOMPRESSED?= no
.endif
.if defined(PATCHFILES)
.if ${PATCHFILES:M*.zip}x != x
PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
.endif
.endif
# Check the compatibility layer for amd64/ia64
.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
.if exists(/usr/lib32)
HAVE_COMPAT_IA32_LIBS?= YES
.endif
.if !defined(HAVE_COMPAT_IA32_KERN)
HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi
.endif
.endif
.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386"
.if ${ARCH} == "amd64" || ${ARCH} == "ia64"
.if !defined(HAVE_COMPAT_IA32_KERN)
IGNORE= requires a kernel with compiled-in IA32 compatibility
.elif !defined(HAVE_COMPAT_IA32_LIBS)
IGNORE= requires 32-bit libraries installed under /usr/lib32
.endif
_LDCONFIG_FLAGS=-32
LIB32DIR= lib32
.else
IGNORE= requires i386 (or compatible) platform to run
.endif
.else
LIB32DIR= lib
.endif
PLIST_SUB+= LIB32DIR=${LIB32DIR}
.if defined(USE_ZIP)
EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
.endif
.if defined(USE_XZ) && ( (${OSVERSION} >= 900000 && ${OSVERSION} < 900012) || ${OSVERSION} < 800505 )
EXTRACT_DEPENDS+= ${LOCALBASE}/bin/xz:${PORTSDIR}/archivers/xz
.endif
.if defined(USE_MAKESELF)
EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself
.endif
.if defined(USE_GMAKE)
BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
CONFIGURE_ENV+= MAKE=${GMAKE}
.endif
.if defined(USE_GCC) || defined(USE_FORTRAN)
.include "${PORTSDIR}/Mk/bsd.gcc.mk"
.endif
.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS)
BUILD_DEPENDS+= ${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils
BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \
READELF SIZE STRINGS
BINUTILS_NO_MAKE_ENV?=
. for b in ${BINUTILS}
${b}= ${LOCALBASE}/bin/${b:C/PP/++/:L}
. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE)
CONFIGURE_ENV+= ${b}="${${b}}"
. endif
. if ${BINUTILS_NO_MAKE_ENV:M${b}} == ""
MAKE_ENV+= ${b}="${${b}}"
. endif
. endfor
.endif
.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER)
.include "${PORTSDIR}/Mk/bsd.ldap.mk"
.endif
.if defined(USE_OPENAL)
_OPENAL_ALL= al si soft alut
_OPENAL_LIBS= si soft
# Default choice.
_DEFAULT_OPENAL= soft
_OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft
_OPENAL_SI= openal.0:${PORTSDIR}/audio/openal
_OPENAL_ALUT= alut.1:${PORTSDIR}/audio/freealut
.if exists(${LOCALBASE}/lib/libopenal.a)
_HAVE_OPENAL= si
.elif exists(${LOCALBASE}/bin/openal-info)
_HAVE_OPENAL= soft
.endif
.if ${USE_OPENAL} == "yes"
# Be friendly.
USE_OPENAL= ${_DEFAULT_OPENAL}
.endif
__USED_OPENAL=
_USE_OPENAL=
.for component in ${USE_OPENAL}
.if ${__USED_OPENAL:M${component}} == ""
__USED_OPENAL+= ${component}
.if ${_OPENAL_ALL:M${component}} == ""
BROKEN= OPENAL mismatch: unknown component ${component}
.elif ${_OPENAL_ALL:M${component}} == "al"
# Check if the user wish matches the found OpenAL system.
.if defined(WANT_OPENAL) && defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${WANT_OPENAL}
BROKEN= OPENAL mismatch: ${_HAVE_OPENAL} is installed, but ${WANT_OPENAL} desired
.endif # WANT_OPENAL
.if defined(_HAVE_OPENAL)
_OPENAL_SYSTEM= ${_HAVE_OPENAL}
.elif defined(WANT_OPENAL)
_OPENAL_SYSTEM= ${WANT_OPENAL}
.else
_OPENAL_SYSTEM= ${_DEFAULT_OPENAL}
.endif # _HAVE_OPENAL
_USE_OPENAL+= ${_OPENAL_${_OPENAL_SYSTEM:U}}
.else # ${_OPENAL_ALL:M${component}} == ""
.if ${_OPENAL_LIBS:M${component}} == ${component}
# Check for the system implementation to use.
.if defined(WANT_OPENAL) && ${WANT_OPENAL} != ${component}
BROKEN= OPENAL mismatch: wants to use ${component}, while you wish to use ${WANT_OPENAL}
.endif
.if defined(_OPENAL_SYSTEM)
BROKEN= OPENAL mismatch: cannot use ${component} and al together.
.endif
.if defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${component}
BROKEN= OPENAL mismatch: wants to use ${component}, but ${_HAVE_OPENAL} is installed
.endif
_OPENAL_SYSTEM= ${component}
.endif # ${_OPENAL_LIBS:M${component}} == ${component}
_USE_OPENAL+= ${_OPENAL_${component:U}}
.endif # ${_OPENAL_ALL:M${component}} == ""
.endif # ${__USED_OPENAL:M${component} == ""
.endfor # component in ${USE_OPENAL}
.for dep in ${_USE_OPENAL}
LIB_DEPENDS+= ${dep}
.endfor
.endif # USE_OPENAL
.if defined(USE_FAM)
DEFAULT_FAM_SYSTEM= gamin
# Currently supported FAM systems
FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam
FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin
.if exists(${LOCALBASE}/libexec/gam_server)
_HAVE_FAM_SYSTEM= gamin
.elif exists(${LOCALBASE}/bin/fam)
_HAVE_FAM_SYSTEM= fam
.endif
.if defined(WANT_FAM_SYSTEM)
.if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM}
IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM}
.endif
FAM_SYSTEM= ${WANT_FAM_SYSTEM}
.elif defined(WITH_FAM_SYSTEM)
FAM_SYSTEM= ${WITH_FAM_SYSTEM}
.else
.if defined(_HAVE_FAM_SYSTEM)
FAM_SYSTEM= ${_HAVE_FAM_SYSTEM}
.else
FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM}
.endif
.endif # WANT_FAM_SYSTEM
.if defined(_HAVE_FAM_SYSTEM)
.if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM}
BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM}
.endif
.endif
.if defined(FAM_SYSTEM_${FAM_SYSTEM:U})
LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}}
.else
IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM}
.endif
.endif # USE_FAM
.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
SUB_FILES+= ${USE_RC_SUBR}
.endif
.if defined(USE_RCORDER)
SUB_FILES+= ${USE_RCORDER}
.endif
.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes"
USE_LDCONFIG= ${PREFIX}/lib
.endif
.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes"
IGNORE= has USE_LDCONFIG32 set to yes, which is not correct
.endif
.if defined(USE_ICONV)
LIB_DEPENDS+= iconv.3:${PORTSDIR}/converters/libiconv
.endif
.if defined(USE_GETTEXT)
. if ${USE_GETTEXT:L} == "build"
BUILD_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
. elif ${USE_GETTEXT:L} == "run"
RUN_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
. elif ${USE_GETTEXT:L} == "yes"
LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext
. else
IGNORE= USE_GETTEXT can be only one of build, run, or yes
. endif
.endif
.if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG)
# we need ${LINUXBASE}/sbin/ldconfig
USE_LINUX?= yes
.endif
.if defined(USE_LINUX)
. if !defined(LINUX_OSRELEASE)
LINUX_OSRELEASE!= ${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null`
. endif
# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools.
STRIP=
. if exists(${LINUXBASE}/usr/bin/strip)
STRIP_CMD= ${LINUXBASE}/usr/bin/strip
. else
STRIP_CMD= ${TRUE}
. endif
# Allow the user to specify another linux_base version.
. if defined(OVERRIDE_LINUX_BASE_PORT)
. if ${USE_LINUX:L} == yes
USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT}
. endif
. endif
# NOTE: when you update the default linux_base version (case "yes"),
# don't forget to update the Handbook!
. if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX})
LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX}
. else
. if ${USE_LINUX:L} == "yes"
. if ${OSVERSION} < 800076
LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4
. else
LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10
. endif
. else
IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT
. endif
. endif
RUN_DEPENDS+= ${LINUX_BASE_PORT}
.endif
.if defined(USE_MOTIF)
USE_XORG+= xpm
.if defined(WANT_LESSTIF)
LIB_DEPENDS+= Xm:${PORTSDIR}/x11-toolkits/lesstif
NO_OPENMOTIF= yes
.endif
.if !defined(NO_OPENMOTIF)
LIB_DEPENDS+= Xm.3:${PORTSDIR}/x11-toolkits/open-motif
.endif
.endif
.if defined(USE_FREETYPE)
LIB_DEPENDS+= ttf.4:${PORTSDIR}/print/freetype
.endif
X_IMAKE_PORT= ${PORTSDIR}/devel/imake
X_LIBRARIES_PORT= ${PORTSDIR}/x11/xorg-libraries
X_CLIENTS_PORT= ${PORTSDIR}/x11/xorg-apps
X_SERVER_PORT= ${PORTSDIR}/x11-servers/xorg-server
X_FONTSERVER_PORT= ${PORTSDIR}/x11-fonts/xfs
X_PRINTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-printserver
X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-vfbserver
X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-nestserver
X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/encodings
X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-miscbitmaps
X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-100dpi
X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-75dpi
X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-cyrillic
X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-truetype
X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-type1
X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias
.if defined(USE_IMAKE)
BUILD_DEPENDS+= imake:${X_IMAKE_PORT}
.endif
.if defined(USE_DISPLAY) && !defined(DISPLAY)
BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \
${X11BASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \
${X11BASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT} \
${X11BASE}/share/X11/xkb/rules/base:${PORTSDIR}/x11/xkeyboard-config \
xkbcomp:${PORTSDIR}/x11/xkbcomp
.if !defined(PACKAGE_BUILDING)
CONFIGURE_ENV+= DISPLAY="localhost:1001"
MAKE_ENV+= DISPLAY="localhost:1001"
.endif
.endif
.if defined(USE_XPM)
IGNORE= USE_XPM is deprecated. Use USE_XORG=xpm instead.
.endif
XAWVER= 8
PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist'
PLIST_SUB+= XAWVER=${XAWVER}
_GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL
_GL_glew_LIB_DEPENDS= GLEW.1:${PORTSDIR}/graphics/glew
_GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU
_GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw
_GL_glut_LIB_DEPENDS= glut.3:${PORTSDIR}/graphics/libglut
_GL_linux_RUN_DEPENDS= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1:${PORTSDIR}/graphics/linux_dri
.if defined(USE_GL)
. if ${USE_GL:L} == "yes"
USE_GL= glu
. endif
. for _component in ${USE_GL}
. if !defined(_GL_${_component}_LIB_DEPENDS) && \
!defined(_GL_${_component}_RUN_DEPENDS)
IGNORE= uses unknown GL component
. else
LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS}
RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS}
. endif
. endfor
.endif
.if defined(USE_BISON)
_BISON_DEPENDS= bison:${PORTSDIR}/devel/bison
# XXX: backwards compatibility
. if ${USE_BISON:L} == "yes"
USE_BISON= build
pre-everything::
@${ECHO_MSG} "WARNING: USE_BISON=yes deprecated, use build/run/both"
. endif
. if ${USE_BISON:L} == "build"
BUILD_DEPENDS+= ${_BISON_DEPENDS}
. elif ${USE_BISON:L} == "run"
RUN_DEPENDS+= ${_BISON_DEPENDS}
. elif ${USE_BISON:L} == "both"
BUILD_DEPENDS+= ${_BISON_DEPENDS}
RUN_DEPENDS+= ${_BISON_DEPENDS}
. else
IGNORE= uses unknown USE_BISON construct
. endif
.endif
.if !defined(_PERL_REFACTORING_COMPLETE)
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
PERL_VER=${PERL_VERSION} \
PERL_ARCH=${PERL_ARCH} \
SITE_PERL=${SITE_PERL_REL}
.endif # !defined(_PERL_REFACTORING_COMPLETE)
.if defined(USE_LOCAL_MK)
.include "${PORTSDIR}/Mk/bsd.local.mk"
.endif
.if defined(USE_XORG) || defined(XORG_CAT)
.include "${PORTSDIR}/Mk/bsd.xorg.mk"
.endif
.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \
defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \
defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD)
.include "${PORTSDIR}/Mk/bsd.database.mk"
.endif
.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
.endif
.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
.include "${PORTSDIR}/Mk/bsd.efl.mk"
.endif
.if defined(USE_JAVA)
.include "${PORTSDIR}/Mk/bsd.java.mk"
.endif
.if defined(USE_LINUX_RPM)
.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
.endif
.if defined(USE_LINUX_APPS)
.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
.endif
.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
.include "${PORTSDIR}/Mk/bsd.qt.mk"
.endif
.if defined(USE_SCONS)
.include "${PORTSDIR}/Mk/bsd.scons.mk"
.endif
.if defined(USE_SDL) || defined(WANT_SDL)
.include "${PORTSDIR}/Mk/bsd.sdl.mk"
.endif
#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD)
.include "${PORTSDIR}/Mk/bsd.perl.mk"
#.endif
.if defined(USE_PHP)
.include "${PORTSDIR}/Mk/bsd.php.mk"
.endif
.if defined(USE_PYTHON)
.include "${PORTSDIR}/Mk/bsd.python.mk"
.endif
.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD)
.include "${PORTSDIR}/Mk/bsd.tcl.mk"
.endif
.if defined(USE_LUA) || defined(USE_LUA_NOT)
.include "${PORTSDIR}/Mk/bsd.lua.mk"
.endif
.if defined(USE_WX) || defined(USE_WX_NOT)
.include "${PORTSDIR}/Mk/bsd.wx.mk"
.endif
.if defined(USE_APACHE) || defined(APACHE_COMPAT)
.include "${PORTSDIR}/Mk/bsd.apache.mk"
.endif
.if defined(USE_AUTOTOOLS)
.include "${PORTSDIR}/Mk/bsd.autotools.mk"
.endif
.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
.include "${PORTSDIR}/Mk/bsd.fpc.mk"
.endif
.if defined(WANT_GECKO) || defined(USE_GECKO)
.include "${PORTSDIR}/Mk/bsd.gecko.mk"
.endif
.if defined(WANT_GNOME) || defined(USE_GNOME)
.include "${PORTSDIR}/Mk/bsd.gnome.mk"
.endif
.if defined(USE_XFCE)
.include "${PORTSDIR}/Mk/bsd.xfce.mk"
.endif
.if defined(USE_KDE4)
.include "${PORTSDIR}/Mk/bsd.kde4.mk"
.endif
.if defined(USE_CMAKE)
.include "${PORTSDIR}/Mk/bsd.cmake.mk"
.endif
.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
USE_SUBMAKE= yes
.endif
.if defined(USE_XLIB)
. if defined(USE_LINUX)
RUN_DEPENDS+= ${LINUXBASE}/usr/X11R6/lib/libXrender.so.1:${PORTSDIR}/x11/linux-xorg-libs
. else
BUILD_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
RUN_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
. endif
.endif
.if defined(USE_XLIB) || defined(USE_XORG)
# Add explicit X options to avoid problems with false positives in configure
.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
.endif
.endif
# Set the default for the installation of Postscript(TM)-
# compatible functionality.
.if !defined(USE_GHOSTSCRIPT)
. if defined(USE_GHOSTSCRIPT_BUILD)
_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_BUILD}
. elif defined(USE_GHOSTSCRIPT_RUN)
_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_RUN}
. endif
.else
_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT}
.endif
.if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[78])
_USE_GHOSTSCRIPT_DEFAULT_VER= ${WITH_GHOSTSCRIPT_VER}
.else
_USE_GHOSTSCRIPT_DEFAULT_VER= 8
.endif
.if defined(_USE_GHOSTSCRIPT)
. if !defined(WITHOUT_X11)
_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=
. else
_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11
. endif
. if !empty(_USE_GHOSTSCRIPT:M[78])
_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[78]}
. else
_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
. endif
.else
_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
.endif
# Sanity check
.if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER)
. if empty(WITH_GHOSTSCRIPT_VER:M[78])
. error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER. Abort.
. elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER}
. error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}. Abort.
. endif
.endif
GHOSTSCRIPT_PORT?= print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX}
# Set up the ghostscript dependencies.
.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD)
BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
.endif
.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN)
RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
.endif
# Set up the cdrtools.
.if defined(USE_CDRTOOLS)
BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
.endif
# Macro for doing in-place file editing using regexps
REINPLACE_ARGS?= -i.bak
REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS}
# Names of cookies used to skip already completed stages
EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g}
CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g}
INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g}
BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g}
PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g}
PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g}
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= ${TRUE}
# Use this as the first operand to always build dependency.
NONEXISTENT?= /nonexistent
CHECKSUM_ALGORITHMS?= sha256
DISTINFO_FILE?= ${MASTERDIR}/distinfo
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
MAKE_ENV+= PREFIX=${PREFIX} \
LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \
MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" \
CC="${CC}" CPP="${CPP}" CXX="${CXX}" \
CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \
MANPREFIX="${MANPREFIX}"
# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher.
# gcc 4.x enable strict aliasing optimization with -O2 which is known to break
# a lot of ports.
.if !defined(WITHOUT_NO_STRICT_ALIASING)
.if ${CC} != "icc"
.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
CFLAGS+= -fno-strict-aliasing
.endif
.endif
.endif
.if defined(USE_CSTD)
CFLAGS:= ${CFLAGS:N-std=*} -std=${USE_CSTD}
.endif
# Multiple make jobs support
.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
_MAKE_JOBS= #
.else
.if defined(MAKE_JOBS_SAFE) || defined(FORCE_MAKE_JOBS)
MAKE_JOBS_NUMBER?= `${SYSCTL} -n kern.smp.cpus`
_MAKE_JOBS?= -j${MAKE_JOBS_NUMBER}
.if defined(FORCE_MAKE_JOBS) && !defined(MAKE_JOBS_SAFE)
BUILD_FAIL_MESSAGE+= "You have chosen to use multiple make jobs (parallelization) for all ports. This port was not tested for this setting. Please remove FORCE_MAKE_JOBS and retry the build before reporting the failure to the maintainer."
.endif
.endif
.endif
PTHREAD_CFLAGS?=
PTHREAD_LIBS?= -pthread
.if exists(/usr/bin/fetch)
FETCH_BINARY?= /usr/bin/fetch
FETCH_ARGS?= -ApRr
FETCH_REGET?= 1
.if !defined(DISABLE_SIZE)
FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
.endif
.else
FETCH_BINARY?= /usr/bin/ftp
FETCH_ARGS?= -R
FETCH_REGET?= 0
.endif
FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS}
.if defined(RANDOMIZE_MASTER_SITES)
.if exists(/usr/games/random)
RANDOM_CMD?= /usr/games/random
RANDOM_ARGS?= "-w -f -"
_RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}"
.endif
.endif
TOUCH?= /usr/bin/touch
TOUCH_FLAGS?= -f
DISTORIG?= .bak.orig
PATCH?= /usr/bin/patch
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG)
PATCH_DEBUG_TMP= yes
PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP= no
PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
PATCH_DIST_ARGS+= --batch
.endif
# Prevent breakage with VERSION_CONTROL=numbered
PATCH_ARGS+= -V simple
.if defined(PATCH_CHECK_ONLY)
PATCH_ARGS+= -C
PATCH_DIST_ARGS+= -C
.endif
.if ${PATCH} == "/usr/bin/patch"
PATCH_ARGS+= --suffix .orig
PATCH_DIST_ARGS+= --suffix .orig
.endif
TAR?= /usr/bin/tar
# EXTRACT_SUFX is defined in .pre.mk section
.if defined(USE_ZIP)
EXTRACT_CMD?= ${UNZIP_CMD}
EXTRACT_BEFORE_ARGS?= -qo
EXTRACT_AFTER_ARGS?= -d ${WRKDIR}
.elif defined(USE_MAKESELF)
EXTRACT_CMD?= ${UNMAKESELF_CMD}
EXTRACT_BEFORE_ARGS?=
EXTRACT_AFTER_ARGS?=
.else
EXTRACT_BEFORE_ARGS?= -dc
.if defined(EXTRACT_PRESERVE_OWNERSHIP)
EXTRACT_AFTER_ARGS?= | ${TAR} -xf -
.else
EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --no-same-owner --no-same-permissions
.endif
.if defined(USE_BZIP2)
EXTRACT_CMD?= ${BZIP2_CMD}
.elif defined(USE_XZ)
EXTRACT_CMD?= ${XZ_CMD}
.else
EXTRACT_CMD?= ${GZIP_CMD}
.endif
.endif
# Figure out where the local mtree file is
.if !defined(MTREE_FILE) && !defined(NO_MTREE)
.if ${PREFIX} == /usr
MTREE_FILE= /etc/mtree/BSD.usr.dist
.else
MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist
.endif
MTREE_FILE_DEFAULT=yes
.endif
MTREE_CMD?= /usr/sbin/mtree
MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p
READLINK_CMD?= /usr/bin/readlink
# Determine whether or not we can use rootly owner/group functions.
.if !defined(UID)
UID!= ${ID} -u
.endif
.if ${UID} == 0
_BINOWNGRP= -o ${BINOWN} -g ${BINGRP}
_SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP}
_MANOWNGRP= -o ${MANOWN} -g ${MANGRP}
.else
_BINOWNGRP=
_SHROWNGRP=
_MANOWNGRP=
.endif
# A few aliases for *-install targets
INSTALL_PROGRAM= \
${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE}
INSTALL_KLD= \
${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
INSTALL_LIB= \
${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE}
INSTALL_SCRIPT= \
${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
INSTALL_DATA= \
${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE}
INSTALL_MAN= \
${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_LIB="${INSTALL_LIB}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}"
MAKE_ENV+= ${INSTALL_MACROS}
SCRIPTS_ENV+= ${INSTALL_MACROS}
# Macro for copying entire directory tree with correct permissions
.if ${UID} == 0
COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
2>&1) && \
${CHOWN} -R ${BINOWN}:${BINGRP} $$1 && \
${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
2>&1) && \
${CHOWN} -R ${SHAREOWN}:${SHAREGRP} $$1 && \
${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
.else
COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
2>&1) && \
${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
2>&1) && \
${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
.endif
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif
DESCR?= ${PKGDIR}/pkg-descr
PLIST?= ${PKGDIR}/pkg-plist
PKGINSTALL?= ${PKGDIR}/pkg-install
PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall
PKGREQ?= ${PKGDIR}/pkg-req
PKGMESSAGE?= ${PKGDIR}/pkg-message
TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
.for _CATEGORY in ${CATEGORIES}
PKGCATEGORY?= ${_CATEGORY}
.endfor
_PORTDIRNAME= ${.CURDIR:T}
PORTDIRNAME?= ${_PORTDIRNAME}
PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME}
.if !defined(PKG_ARGS)
PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
.if !defined(NO_MTREE)
PKG_ARGS+= -m ${MTREE_FILE}
.endif
.if defined(PKGORIGIN)
PKG_ARGS+= -o ${PKGORIGIN}
.endif
.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
PKG_ARGS+= -C "${CONFLICTS}"
.endif
.endif
.if defined(PKG_NOCOMPRESS)
PKG_SUFX?= .tar
.else
PKG_SUFX?= .tbz
.endif
# where pkg_add records its dirty deeds.
PKG_DBDIR?= /var/db/pkg
MOTIFLIB?= -L${X11BASE}/lib -lXm -lXp
ALL_TARGET?= all
INSTALL_TARGET?= install
# Integrate with the license auditing framework
.include "${PORTSDIR}/Mk/bsd.licenses.mk"
# Popular master sites
.include "${PORTSDIR}/Mk/bsd.sites.mk"
# Empty declaration to avoid "variable MASTER_SITES recursive" error
MASTER_SITES?=
PATCH_SITES?=
_MASTER_SITES_DEFAULT?=
_PATCH_SITES_DEFAULT?=
# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation
# as per grouping rules (:something)
# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping
# rules (:something)
.for _S in ${MASTER_SITES}
_S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
_G_TEMP= ${_group}
. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
check-makevars::
@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
@${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES"
@${FALSE}
. endif
_MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
. endfor
. else
_MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
. endif
.endfor
.for _S in ${PATCH_SITES}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
_G_TEMP= ${_group}
. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
check-makevars::
@${ECHO_MSG} "The words all, ALL and default are reserved and cannot be"
@${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES"
@${FALSE}
. endif
_PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
. endfor
. else
_PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
. endif
.endfor
# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation
# as per grouping rules (:something)
# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping
# rules (:something)
.for _S in ${MASTER_SITE_SUBDIR}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
_G_TEMP= ${_group}
. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
check-makevars::
@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
@${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR"
@${FALSE}
. endif
. if defined(_MASTER_SITES_${_group})
_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
. endif
. endfor
. else
. if defined(_MASTER_SITES_DEFAULT)
_MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
. endif
. endif
.endfor
.for _S in ${PATCH_SITE_SUBDIR}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
_G_TEMP= ${_group}
. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
check-makevars::
@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
@${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR"
@${FALSE}
. endif
. if defined(_PATCH_SITES_${_group})
_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
. endif
. endfor
. else
. if defined(_PATCH_SITES_DEFAULT)
_PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
. endif
. endif
.endfor
# Substitute subdirectory names
# XXX simpler/faster solution but not the best space wise, suggestions please
.for _S in ${MASTER_SITES}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
. if !defined(_MASTER_SITE_SUBDIR_${_group})
MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^}
. else
_S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
MASTER_SITES_TMP= ${_MASTER_SITES_${_group}}
. else
MASTER_SITES_TMP=
. for site in ${_MASTER_SITES_${_group}}
_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
MASTER_SITES_TMP+= ${site}
. else
. for dir in ${_MASTER_SITE_SUBDIR_${_group}}
MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
. endfor
. endif
. endfor
. endif
. endif
_MASTER_SITES_${_group}:= ${MASTER_SITES_TMP}
. endfor
. endif
.endfor
.if defined(_MASTER_SITE_SUBDIR_DEFAULT)
_S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*}
. if empty(_S_TEMP)
MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT}
. else
MASTER_SITES_TMP=
. for site in ${_MASTER_SITES_DEFAULT}
_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
MASTER_SITES_TMP+= ${site}
. else
. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT}
MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
. endfor
. endif
. endfor
. endif
.else
MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^}
.endif
_MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP}
MASTER_SITES_TMP=
.for _S in ${PATCH_SITES}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/,/ /g}
. if !defined(_PATCH_SITE_SUBDIR_${_group})
PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^}
. else
_S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
PATCH_SITES_TMP= ${_PATCH_SITES_${_group}}
. else
PATCH_SITES_TMP=
. for site in ${_PATCH_SITES_${_group}}
_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
PATCH_SITES_TMP+= ${site}
. else
. for dir in ${_PATCH_SITE_SUBDIR_${_group}}
PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
. endfor
. endif
. endfor
. endif
. endif
_PATCH_SITES_${_group}:= ${PATCH_SITES_TMP}
. endfor
. endif
.endfor
.if defined(_PATCH_SITE_SUBDIR_DEFAULT)
_S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*}
. if empty(_S_TEMP)
PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT}
. else
PATCH_SITES_TMP=
. for site in ${_PATCH_SITES_DEFAULT}
_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
. if empty(_S_TEMP_TEMP)
PATCH_SITES_TMP+= ${site}
. else
. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT}
PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
. endfor
. endif
. endfor
. endif
.else
PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^}
.endif
_PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP}
PATCH_SITES_TMP=
# The primary backup site.
MASTER_SITE_BACKUP?= \
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^}
# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository
# for everything, but don't search it twice by appending it to the end.
.if defined(MASTER_SITE_FREEBSD)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP}
_MASTER_SITE_BACKUP:= # empty
.else
_MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE}
_MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP}
.endif
# Search CDROM first if mounted, symlink instead of copy if
# FETCH_SYMLINK_DISTFILES is set
.for MOUNTPT in ${CD_MOUNTPTS}
.if exists(${MOUNTPT}/ports/distfiles)
_MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE}
.if defined(FETCH_SYMLINK_DISTFILES)
FETCH_BEFORE_ARGS+= -l
.endif
.endif
.endfor
NOFETCHFILES?=
# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL
# according to grouping rules (:something)
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
_MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT}
_PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT}
_G_TEMP= DEFAULT
.for _D in ${DISTFILES}
_D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//}
. if !empty(_D_TEMP)
. for _group in ${_D_TEMP:S/^://:S/,/ /g}
. if !defined(_MASTER_SITES_${_group})
_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
. if empty(_G_TEMP_TEMP)
_G_TEMP+= ${_group}
_MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}}
. endif
. endif
. endfor
_DISTFILES+= ${_D:C/:[^:]+$//}
. else
_DISTFILES+= ${_D}
. endif
.endfor
_G_TEMP= DEFAULT
.for _P in ${PATCHFILES}
_P_TEMP= ${_P:S/^${_P:C/:[^:]+$//}//}
. if !empty(_P_TEMP)
. for _group in ${_P_TEMP:S/^://:S/,/ /g}
. if !defined(_PATCH_SITES_${_group})
_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
. if empty(_G_TEMP_TEMP)
_G_TEMP+= ${_group}
_PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}}
. endif
. endif
. endfor
_PATCHFILES+= ${_P:C/:[^:]+$//}
. else
_PATCHFILES+= ${_P}
. endif
.endfor
_G_TEMP=
_G_TEMP_TEMP=
ALLFILES?= ${_DISTFILES} ${_PATCHFILES}
#
# Sort the master site list according to the patterns in MASTER_SORT
#
MASTER_SORT?=
MASTER_SORT_REGEX?=
MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|}
MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; }
.for srt in ${MASTER_SORT_REGEX}
MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; }
.endfor
MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-DEFAULT
SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-DEFAULT
SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-ALL
SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-ALL
#
# Sort the master site list according to the patterns in MASTER_SORT
# according to grouping rules (:something)
#
# for use in the fetch targets
.for _S in ${MASTER_SITES}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/^://:S/,/ /g}
. if !target(master-sites-${_group})
SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-${_group}
master-sites-${_group}:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
. endif
. endfor
. endif
.endfor
.for _S in ${PATCH_SITES}
_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
. if !empty(_S_TEMP)
. for _group in ${_S_TEMP:S/^://:S/,/ /g}
. if !target(patch-sites-${_group})
SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-${_group}
patch-sites-${_group}:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
. endif
. endfor
. endif
.endfor
#
# Hackery to enable simple fetch targets with several dynamic MASTER_SITES
#
_MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}"
.for _F in ${DISTFILES}
_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
. if !empty(_F_TEMP)
. for _group in ${_F_TEMP:S/,/ /g}
. if defined(_MASTER_SITES_${_group})
_MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}"
. endif
. endfor
. endif
.endfor
_PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}"
.for _F in ${PATCHFILES}
_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
. if !empty(_F_TEMP)
. for _group in ${_F_TEMP:S/,/ /g}
. if defined(_PATCH_SITES_${_group})
_PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}"
. endif
. endfor
. endif
.endfor
master-sites-ALL:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
patch-sites-ALL:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables
master-sites-DEFAULT:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
patch-sites-DEFAULT:
@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
# synonyms, mnemonics
master-sites-all: master-sites-ALL
patch-sites-all: patch-sites-ALL
master-sites-default: master-sites-DEFAULT
patch-sites-default: patch-sites-DEFAULT
# compatibility with old behavior
master-sites: master-sites-DEFAULT
patch-sites: patch-sites-DEFAULT
.if defined(IGNOREFILES)
.if !defined(CKSUMFILES)
CKSUMFILES!= \
for file in ${ALLFILES}; do \
ignore=0; \
for tmp in ${IGNOREFILES}; do \
if [ "$$file" = "$$tmp" ]; then \
ignore=1; \
fi; \
done; \
if [ "$$ignore" = 0 ]; then \
${ECHO_CMD} "$$file"; \
fi; \
done
.endif
.else
CKSUMFILES= ${ALLFILES}
.endif
# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
.if defined(DIST_SUBDIR)
.if defined(CKSUMFILES) && ${CKSUMFILES}!=""
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
.endif
.if defined(IGNOREFILES) && ${IGNOREFILES}!=""
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
.endif
.else
_CKSUMFILES?= ${CKSUMFILES}
_IGNOREFILES?= ${IGNOREFILES}
.endif
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${_DISTFILES}
.if !target(maintainer)
maintainer:
@${ECHO_CMD} "${MAINTAINER}"
.endif
.if !target(check-makefile)
check-makefile::
.if !exists(/usr/share/mk/bsd.port.options.mk)
@${ECHO_CMD} "!!! Detected system without bsd.port.options.mk (probably old FreeBSD version)"
@${ECHO_CMD} "!!! Dropping bsd.port.options.mk into /usr/share/mk"
-@${ECHO_CMD} "USEOPTIONSMK= yes" > /usr/share/mk/bsd.port.options.mk 2>/dev/null
-@${ECHO_CMD} "INOPTIONSMK= yes" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
-@${ECHO_CMD} ".include <bsd.port.mk>" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
-@${ECHO_CMD} ".undef INOPTIONSMK" >> /usr/share/mk/bsd.port.options.mk 2>/dev/null
.if exists(/usr/share/mk/bsd.port.options.mk)
@${ECHO_CMD} "!!! Done"
.else
@${ECHO_CMD} "!!! Failed"
.endif
.endif
@${DO_NADA}
.endif
.if !defined(CATEGORIES)
check-categories:
@${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory."
@${FALSE}
.else
VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \
benchmarks biology cad chinese comms converters databases \
deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \
games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \
ipv6 irc japanese java kde kld korean lang linux lisp \
mail math mbone misc multimedia net net-im net-mgmt net-p2p news \
palm parallel pear perl5 plan9 polish portuguese ports-mgmt \
print python ruby rubygems russian \
scheme science security shells spanish sysutils \
tcl textproc tk \
ukrainian vietnamese windowmaker www \
x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \
x11-toolkits x11-wm xfce zope
check-categories:
.for cat in ${CATEGORIES}
@if ${ECHO_CMD} ${VALID_CATEGORIES} | ${GREP} -wq ${cat}; then \
${TRUE}; \
else \
${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \
${FALSE}; \
fi
.endfor
.endif
.if !target(check-makevars)
check-makevars::
@${DO_NADA}
.endif
.if !target(check-depends)
check-depends:
@${DO_NADA}
.endif
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
.if exists(${PACKAGES})
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX}
.endif
# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
PKGLATESTREPOSITORY?= ${PACKAGES}/Latest
PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}
LATEST_LINK?= ${PKGBASE}
PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX}
CONFIGURE_SCRIPT?= configure
CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL}
CONFIGURE_TARGET:= ${CONFIGURE_TARGET:S/--build=//}
CONFIGURE_LOG?= config.log
# A default message to print if do-configure fails.
CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an \`ls ${PKG_DBDIR}\`)."
.if defined(GNU_CONFIGURE)
# Maximum command line length
.if !defined(CONFIGURE_MAX_CMD_LEN)
CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax
.endif
GNU_CONFIGURE_PREFIX?= ${PREFIX}
CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS}
CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN}
HAS_CONFIGURE= yes
SET_LATE_CONFIGURE_ARGS= \
_LATE_CONFIGURE_ARGS="" ; \
if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \
_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \
fi ; \
if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \
_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \
fi ; \
if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \
_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \
else \
_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \
fi ;
.endif
# Passed to most of script invocations
SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \
X11BASE=${X11BASE}
.if defined(BATCH)
SCRIPTS_ENV+= BATCH=yes
.endif
.if ${PREFIX} == /usr
MANPREFIX?= /usr/share
.else
MANPREFIX?= ${PREFIX}
.endif
.for sect in 1 2 3 4 5 6 7 8 9
MAN${sect}PREFIX?= ${MANPREFIX}
.endfor
MANLPREFIX?= ${MANPREFIX}
MANNPREFIX?= ${MANPREFIX}
MANLANG?= "" # english only by default
.if !defined(NO_MANCOMPRESS)
MANEXT= .gz
.endif
.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS)
__pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \
'{ if (NF % 2 != 0) { print "broken"; exit; } \
for (i=1; i<=NF; i++) { \
if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
{ $$i = $$(i-2); printf " " $$i " "; } \
else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
printf " " $$i " "; \
else \
{ print "broken"; exit; } \
} \
}' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g'
.if ${__pmlinks:Mbroken} == "broken"
check-makevars::
@${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS."
@${FALSE}
.endif
_MLINKS= ${_MLINKS_PREPEND}
# XXX 20040119 This next line should read:
# .for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
# but there is currently a bug in make(1) that prevents the double-quote
# substitution from working correctly. Once that problem is addressed,
# and has had a enough time to mature, this hack should be removed.
.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
.for ___pmlinks in ${__pmlinks}
.for __lang in ${lang}
_MLINKS+= ${___pmlinks:S// /g}
.endfor
.endfor
.endfor
.endif
_COUNT=0
.for ___tpmlinks in ${_MLINKS}
.if ${_COUNT} == "1"
_TMLINKS+= ${___tpmlinks}
_COUNT=0
.else
_COUNT=1
.endif
.endfor
# XXX 20040119 This next line should read:
# .for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
# but there is currently a bug in make(1) that prevents the double-quote
# substitution from working correctly. Once that problem is addressed,
# and has had a enough time to mature, this hack should be removed.
.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
.for sect in 1 2 3 4 5 6 7 8 9 L N
# MAN${sect} is for man pages installed for all languages in MANLANG for a given
# section.
.if defined(MAN${sect})
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
.endif
# Language specific MAN${sect} variables are for man pages installed in that
# language, but not necessarily all languages in MANLANG.
.if defined(MAN${sect}_${manlang:S%^man/%%:U})
_MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
.endif
.endfor
.endfor
# Special case for English, since it is defined with "" in MANLANG rather than
# a language name and does not have man pages installed in a lang subdirectory
# of MAN${sect}PREFIX.
.for sect in 1 2 3 4 5 6 7 8 9 L N
.if defined(MAN${sect}_EN)
_MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%}
.endif
.endfor
.if !defined(_TMLINKS)
_TMLINKS=
.endif
.if defined(_MANPAGES)
.if defined(NO_MANCOMPRESS)
__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%}
.else
__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%}
.endif
.if ${MANCOMPRESSED} == "yes"
_MANPAGES:= ${_MANPAGES:S%$%.gz%}
.endif
.endif
.if ${PREFIX} == /usr
INFO_PATH?= share/info
.else
INFO_PATH?= info
.endif
.if defined(INFO)
. for D in ${INFO:H}
RD:= ${D}
. if ${RD} != "."
. if !defined(INFO_SUBDIR)
INFO_SUBDIR:= ${RD}
. elif ${INFO_SUBDIR} != ${RD}
BROKEN= only one subdirectory in INFO is allowed
. endif
. endif
.undef RD
. endfor
.endif
DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,}
EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,}
DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,}
WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,}
ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,}
PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \
EXAMPLESDIR="${EXAMPLESDIR_REL}" \
DATADIR="${DATADIR_REL}" \
WWWDIR="${WWWDIR_REL}" \
ETCDIR="${ETCDIR_REL}"
DESKTOPDIR?= ${PREFIX}/share/applications
_DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/
.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/
# DESKTOPDIR is not beneath PREFIX
_DESKTOPDIR_REL=
.endif
.MAIN: all
################################################################
# Many ways to disable a port.
#
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# Ignore ports that can't be resold if building for a CDROM.
#
# Don't build a port if it's restricted and we don't want to get
# into that.
#
# Don't build a port if it's broken, unless we're running a parallel
# build (in case it's fixed).
#
# Don't build a port if it's forbidden for whatever reason.
#
# Don't build a port if the system is too old.
################################################################
# Check the machine architectures
.if defined(ONLY_FOR_ARCHS)
.for __ARCH in ${ONLY_FOR_ARCHS}
.if ${ARCH:M${__ARCH}} != ""
__ARCH_OK?= 1
.endif
.endfor
.else
__ARCH_OK?= 1
.endif
.if defined(NOT_FOR_ARCHS)
.for __NARCH in ${NOT_FOR_ARCHS}
.if ${ARCH:M${__NARCH}} != ""
.undef __ARCH_OK
.endif
.endfor
.endif
.if !defined(__ARCH_OK)
.if defined(ONLY_FOR_ARCHS)
IGNORE= is only for ${ONLY_FOR_ARCHS},
.else # defined(NOT_FOR_ARCHS)
IGNORE= does not run on ${NOT_FOR_ARCHS},
.endif
IGNORE+= while you are running ${ARCH}
.if defined(ONLY_FOR_ARCHS_REASON_${ARCH})
IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}})
.elif defined(ONLY_FOR_ARCHS_REASON)
IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON})
.endif
.if defined(NOT_FOR_ARCHS_REASON_${ARCH})
IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}})
.elif defined(NOT_FOR_ARCHS_REASON)
IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON})
.endif
.endif
# Check the user interaction and legal issues
.if !defined(NO_IGNORE)
.if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE= is an interactive port
.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE= is not an interactive port
.elif (defined(NO_CDROM) && defined(FOR_CDROM))
IGNORE= may not be placed on a CDROM: ${NO_CDROM}
.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE= is restricted: ${RESTRICTED}
.elif defined(BROKEN)
.if !defined(TRYBROKEN)
IGNORE= is marked as broken: ${BROKEN}
.endif
.elif defined(FORBIDDEN)
IGNORE= is forbidden: ${FORBIDDEN}
.endif
.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING))
IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD}
clean:
@${IGNORECMD}
.endif
.if defined(IGNORE)
.if defined(IGNORE_SILENT)
IGNORECMD= ${DO_NADA}
.else
IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1
.endif
.for target in check-sanity fetch checksum extract patch configure all build install reinstall package
.if !target(${target})
${target}:
@${IGNORECMD}
.if defined(INSTALLS_DEPENDS)
@${FALSE}
.endif
.endif
.endfor
.endif
.endif
.if defined(IGNORE) || defined(NO_PACKAGE)
ignorelist: package-name
.else
ignorelist:
@${DO_NADA}
.endif
.if defined(IGNORE) || defined(NO_PACKAGE)
ignorelist-verbose:
.if defined(IGNORE)
@${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q}
.else
@${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q}
.endif
.else
ignorelist-verbose:
@${DO_NADA}
.endif
################################################################
# Clean directories for ftp or CDROM.
################################################################
.if !defined(LICENSE)
.if defined(RESTRICTED)
clean-restricted: delete-distfiles delete-package
clean-restricted-list: delete-distfiles-list delete-package-list
RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
.else
clean-restricted:
clean-restricted-list:
.endif
.if defined(NO_CDROM)
clean-for-cdrom: delete-distfiles delete-package
clean-for-cdrom-list: delete-distfiles-list delete-package-list
RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
.else
clean-for-cdrom:
clean-for-cdrom-list:
.endif
.endif # !defined(LICENSE)
.if defined(ALL_HOOK)
all:
@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
CONFLICTS="${CONFLICTS}" \
${ALL_HOOK}
.endif
.if !target(all)
all: build
.endif
.if !defined(DEPENDS_TARGET)
.if defined(DEPENDS_PRECLEAN)
DEPENDS_TARGET= clean
DEPENDS_ARGS= NOCLEANDEPENDS=yes
.endif
.if make(reinstall)
DEPENDS_TARGET+= reinstall
.else
DEPENDS_TARGET+= install
.endif
.if defined(DEPENDS_CLEAN)
DEPENDS_TARGET+= clean
DEPENDS_ARGS+= NOCLEANDEPENDS=yes
.endif
.endif
################################################################
#
# Do preliminary work to detect if we need to run the config
# target or not.
#
################################################################
.if (!defined(OPTIONS) || defined(CONFIG_DONE_${UNIQUENAME:U}) || \
defined(PACKAGE_BUILDING) || defined(BATCH))
_OPTIONS_OK=yes
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of ports in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.if defined(NO_CHECKSUM) && !target(checksum)
checksum: fetch
@${DO_NADA}
.endif
# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.if defined(NO_INSTALL) && !target(install)
install: build
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
.if defined(IGNORE_SILENT)
@${DO_NADA}
.else
@${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}.
.endif
.endif
# Disable describe
.if defined(NO_DESCRIBE) && !target(describe)
describe:
@${DO_NADA}
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
# Pre-everything
# XXX MCL suggests deprecating this in favor of something
# less likely to be abused by overloading
pre-everything::
@${DO_NADA}
buildanyway-message:
.if defined(TRYBROKEN) && defined(BROKEN)
@${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN."
.else
@${DO_NADA}
.endif
options-message:
.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH))
@for m in ${GNOME_OPTION_MSG}; do \
${ECHO_MSG} $$m; \
done
.else
@${DO_NADA}
.endif
.if defined(_OPTIONS_READ)
@${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}"
.if ${OPTIONSFILE} != ${OPTIONSFILE}
@${ECHO_MSG} "===> *** CAUTION *** Using wrong configuration file ${OPTIONSFILE}"
.endif
.endif
# Warn user about deprecated packages. Advisory only.
.if !target(check-deprecated)
check-deprecated:
.if defined(DEPRECATED)
@${ECHO_MSG} "===> NOTICE:"
@${ECHO_MSG}
@${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:"
@${ECHO_MSG}
@${ECHO_MSG} ${DEPRECATED:Q}.
@${ECHO_MSG}
.if defined(EXPIRATION_DATE)
@${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}."
@${ECHO_MSG}
.endif
.endif
.endif
# Check if the port is listed in the vulnerability database
AUDITFILE?= /var/db/portaudit/auditfile.tbz
_EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile
check-vulnerable:
.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING)
@if [ -f "${AUDITFILE}" ]; then \
audit_created=`${_EXTRACT_AUDITFILE} | \
${SED} -nEe "1s/^#CREATED: *([0-9]{4})-?([0-9]{2})-?([0-9]{2}).*$$/\1\2\3/p"`; \
audit_expiry=`/bin/date -u -v-14d "+%Y%m%d"`; \
if [ "$$audit_created" -lt "$$audit_expiry" ]; then \
${ECHO_MSG} "===> WARNING: Vulnerability database out of date, checking anyway"; \
fi; \
vlist=`${_EXTRACT_AUDITFILE} | ${GREP} "${PORTNAME}" | \
${AWK} -F\| ' /^[^#]/ { \
if (!system("${PKG_VERSION} -T \"${PKGNAME}\" \"" $$1 "\"")) \
print "=> " $$3 ".\n Reference: <" $$2 ">" \
} \
'`; \
if [ -n "$$vlist" ]; then \
${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \
${ECHO_MSG} "$$vlist"; \
${ECHO_MSG} "=> Please update your ports tree and try again."; \
exit 1; \
fi; \
else \
${ECHO_MSG} "===> Vulnerability check disabled, database not found"; \
fi
.endif
# set alg to any of SIZE, SHA256 (or any other checksum algorithm):
DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \
DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \
'$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE}
# Fetch
.if !target(do-fetch)
do-fetch:
@${MKDIR} ${_DISTDIR}
@cd ${_DISTDIR};\
${_MASTER_SITES_ENV} ; \
for _file in ${DISTFILES}; do \
file=$${_file%%:*}; \
if [ $$_file = $$file ]; then \
select=''; \
else \
select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \
fi; \
force_fetch=false; \
filebasename=$${file##*/}; \
for afile in ${FORCE_FETCH}; do \
afile=$${afile##*/}; \
if [ "x$$afile" = "x$$filebasename" ]; then \
force_fetch=true; \
fi; \
done; \
if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
if [ -L $$file -o -L $$filebasename ]; then \
${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} "=> Please correct this problem and try again."; \
exit 1; \
fi; \
if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
_sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \
if [ -z "$$_sha256sum" ]; then \
${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \
${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \
${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
exit 1; \
fi; \
fi; \
${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
if [ ! -w ${DISTDIR} ]; then \
${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \
exit 1; \
fi; \
if [ ! -z "$$select" ] ; then \
__MASTER_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \
__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
fi; \
done; \
___MASTER_SITES_TMP= ; \
SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) ${MKDIR} $${file%/*}; \
args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi; \
done; \
${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi; \
done
.if defined(PATCHFILES)
@cd ${_DISTDIR};\
${_PATCH_SITES_ENV} ; \
for _file in ${PATCHFILES}; do \
file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
force_fetch=false; \
filebasename=$${file##*/}; \
for afile in ${FORCE_FETCH}; do \
afile=$${afile##*/}; \
if [ "x$$afile" = "x$$filebasename" ]; then \
force_fetch=true; \
fi; \
done; \
if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
if [ -L $$file -o -L $${file##*/} ]; then \
${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} "=> Please correct this problem and try again."; \
exit 1; \
fi; \
${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
if [ ! -z "$$select" ] ; then \
__PATCH_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \
__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
fi; \
done; \
___PATCH_SITES_TMP= ; \
SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \
${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) ${MKDIR} $${file%/*}; \
args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi; \
done; \
${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi; \
done
.endif
.endif
# Extract
.if !target(do-extract)
do-extract:
@${RM} -rf ${WRKDIR}
@${MKDIR} ${WRKDIR}
@for file in ${EXTRACT_ONLY}; do \
if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi; \
done
.if !defined(EXTRACT_PRESERVE_OWNERSHIP)
@if [ `${ID} -u` = 0 ]; then \
${CHMOD} -R ug-s ${WRKDIR}; \
${CHOWN} -R 0:0 ${WRKDIR}; \
fi
.endif
.endif
# Patch
.if !target(patch-dos2unix)
patch-dos2unix:
.if defined(USE_DOS2UNIX)
.if ${USE_DOS2UNIX:U}=="YES"
@${ECHO_MSG} "===> Converting DOS text files to UNIX text files"
@${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \
${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
.else
@${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}"
.if ${USE_DOS2UNIX:M*/*}
.for f in ${USE_DOS2UNIX}
@${REINPLACE_CMD} -i '' -e 's/
$$//' ${WRKSRC}/${f}
.endfor
.else
.for f in ${USE_DOS2UNIX}
@${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \
${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
.endfor
.endif
.endif
.else
@${DO_NADA}
.endif
.endif
.if !target(do-patch)
do-patch:
.if defined(PATCHFILES)
@${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
@(cd ${_DISTDIR}; \
for i in ${_PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying distribution patch $$i" ; \
fi; \
case $$i in \
*.Z|*.gz) \
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*.bz2) \
${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
;; \
esac; \
done)
.endif
.if defined(EXTRA_PATCHES)
@for i in ${EXTRA_PATCHES}; do \
${ECHO_MSG} "===> Applying extra patch $$i"; \
${PATCH} ${PATCH_ARGS} < $$i; \
done
.endif
@if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
PATCHES_APPLIED="" ; \
for i in ${PATCHDIR}/patch-*; do \
case $$i in \
*.orig|*.rej|*~|*,v) \
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
;; \
*) \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
fi; \
if ${PATCH} ${PATCH_ARGS} < $$i ; then \
PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
else \
${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
if [ x"$$PATCHES_APPLIED" != x"" ]; then \
${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
fi; \
${FALSE} ; \
fi; \
;; \
esac; \
done; \
fi; \
fi
.endif
.if !target(run-autotools)
run-autotools:
@${DO_NADA}
.endif
# Configure
.if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
.if defined(GNU_CONFIGURE)
@CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \
| ${XARGS} -n 1 ${DIRNAME}); \
for _D in $${CONFIG_GUESS_DIRS}; do \
${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \
${CHMOD} a+rx $${_D}/config.guess; \
${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \
${CHMOD} a+rx $${_D}/config.sub; \
done
.endif
.if defined(HAS_CONFIGURE)
@(cd ${CONFIGURE_WRKSRC} && \
${SET_LATE_CONFIGURE_ARGS} \
if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \
CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \
INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \
INSTALL_DATA="${INSTALL_DATA}" \
INSTALL_LIB="${INSTALL_LIB}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
(${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
${FALSE}; \
fi)
.endif
.if defined(USE_IMAKE)
@(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF})
.endif
.endif
# Build
.if !target(do-build)
do-build:
.if defined(USE_GMAKE)
@(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
${ECHO_MSG} "===> Compilation failed unexpectedly."; \
(${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
fi; \
${FALSE}; \
fi)
.else
@(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
${ECHO_MSG} "===> Compilation failed unexpectedly."; \
(${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
fi; \
${FALSE}; \
fi)
.endif
.endif
# Check conflicts
.if !target(check-conflicts)
check-conflicts:
.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
@found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
conflicts_with=; \
for entry in $${found}; do \
if ${PKG_INFO} -e $${entry} ; then \
prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
conflicts_with="$${conflicts_with} $${entry}"; \
fi; \
fi; \
done; \
if [ -n "$${conflicts_with}" ]; then \
${ECHO_MSG}; \
${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
for entry in $${conflicts_with}; do \
${ECHO_MSG} " $${entry}"; \
done; \
${ECHO_MSG}; \
${ECHO_MSG} " They install files into the same place."; \
${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
exit 1; \
fi
.endif # CONFLICTS
.endif
# Install
.if !target(do-install)
do-install:
.if defined(USE_GMAKE)
@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
.endif
.else # !defined(USE_GMAKE)
@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
.endif
.endif
.endif
# Package
.if !target(do-package)
do-package: ${TMPPLIST}
@if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
if ! ${MKDIR} ${PKGREPOSITORY}; then \
${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
fi
@__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
_LATE_PKG_ARGS=""; \
if [ -f ${PKGINSTALL} ]; then \
_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \
fi; \
if [ -f ${PKGDEINSTALL} ]; then \
_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \
fi; \
if [ -f ${PKGREQ} ]; then \
_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \
fi; \
if [ -f ${PKGMESSAGE} ]; then \
_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \
fi; \
if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
if [ -d ${PACKAGES} ]; then \
cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} package-links; \
fi; \
else \
cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} delete-package; \
exit 1; \
fi
.endif
# Some support rules for do-package
.if !target(package-links)
package-links: delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
if ! ${MKDIR} ${PACKAGES}/$$cat; then \
${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done
.if !defined(NO_LATEST_LINK)
@if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \
exit 1; \
fi; \
fi
@${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
.endif
.endif
.if !target(delete-package-links)
delete-package-links:
@for cat in ${CATEGORIES}; do \
${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
done
.if !defined(NO_LATEST_LINK)
@${RM} -f ${PKGLATESTFILE}
.endif
.endif
.if !target(delete-package)
delete-package: delete-package-links
@${RM} -f ${PKGFILE}
.endif
.if !target(delete-package-links-list)
delete-package-links-list:
@for cat in ${CATEGORIES}; do \
${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
done
.if !defined(NO_LATEST_LINK)
@${ECHO_CMD} ${RM} -f ${PKGLATESTFILE}
.endif
.endif
.if !target(delete-package-list)
delete-package-list: delete-package-links-list
@${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})"
.endif
# Utility targets follow
.if !target(check-already-installed)
check-already-installed:
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
@${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \
${MKDIR} ${PKG_DBDIR}; \
already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
if [ -n "$${already_installed}" ]; then \
for p in $${already_installed}; do \
prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
if [ "x${PREFIX}" = "x$${prfx}" ]; then \
df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${COMM} -12 - ${TMPPLIST}`; \
if [ -n "$${df}" ]; then \
found_package=$${p}; \
break; \
fi; \
fi; \
done; \
fi; \
if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \
if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_CMD} "===> ${PKGNAME} is already installed"; \
else \
${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \
fi; \
${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \
${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \
${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \
${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
${ECHO_MSG} " in your environment or the \"make install\" command line."; \
exit 1; \
fi
.else
@${DO_NADA}
.endif
.endif
.if !target(check-umask)
check-umask:
@if [ `${SH} -c umask` != 0022 ]; then \
${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
fi
.endif
.if !target(install-mtree)
install-mtree:
@${MKDIR} ${PREFIX}
@if [ `${ID} -u` != 0 ]; then \
if [ -w ${PREFIX}/ ]; then \
${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \
else \
${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \
${FALSE}; \
fi; \
fi
.if !defined(NO_MTREE)
@if [ `${ID} -u` = 0 ]; then \
if [ ! -f ${MTREE_FILE} ]; then \
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
exit 1; \
else \
${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \
cd ${PREFIX}/share/nls; \
for link in POSIX en_US.US-ASCII; \
do \
if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \
then \
${LN} -shf C $${link}; \
fi; \
done; \
fi; \
fi; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \
fi
.endif
.endif
.if !target(install-ldconfig-file)
install-ldconfig-file:
.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32)
.if defined(USE_LDCONFIG)
.if defined(USE_LINUX_PREFIX)
@${ECHO_MSG} "===> Running linux ldconfig"
${LDCONFIG_CMD}
.else
.if !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Running ldconfig"
${LDCONFIG} -m ${USE_LDCONFIG}
.else
@${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
-${LDCONFIG} -m ${USE_LDCONFIG}
.endif
.if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Installing ldconfig configuration file"
.if defined(NO_LDCONFIG_MTREE)
@${MKDIR} ${PREFIX}/${LDCONFIG_DIR}
.endif
@${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \
> ${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME}
@${ECHO_CMD} "@cwd" >> ${TMPPLIST}
@${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST}
.if defined(NO_LDCONFIG_MTREE)
@${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST}
.endif
.endif
.endif
.endif
.if defined(USE_LDCONFIG32)
.if !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Running ldconfig"
${LDCONFIG} -32 -m ${USE_LDCONFIG32}
.else
@${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
-${LDCONFIG} -32 -m ${USE_LDCONFIG32}
.endif
.if !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file"
.if defined(NO_LDCONFIG_MTREE)
@${MKDIR} ${PREFIX}/${LDCONFIG_32DIR}
.endif
@${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \
> ${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME}
@${ECHO_CMD} "@cwd" >> ${TMPPLIST}
@${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST}
.if defined(NO_LDCONFIG_MTREE)
@${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST}
.endif
.endif
.endif
.if defined(INSTALLS_SHLIB)
@${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead."
.endif
.endif
.endif
.if !target(create-users-groups)
create-users-groups:
.if defined(GROUPS) || defined(USERS)
.if defined(GROUPS)
.for _file in ${GID_FILES}
.if !exists(${_file})
@${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
.endif
.endfor
@${ECHO_MSG} "===> Creating users and/or groups."
.for _group in ${GROUPS}
# _bgpd:*:130:
@if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \
${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \
exit 1; \
fi
@IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
gid=$$(($$gid+${GID_OFFSET})); \
if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \
${PW} groupadd $$group -g $$gid; \
else \
${ECHO_MSG} "Using existing group \`$$group'."; \
fi; \
${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then ${PW} groupadd $$group -g $$gid; fi" >> ${TMPPLIST}; \
done
.endfor
.endif
.if defined(USERS)
.for _file in ${UID_FILES}
.if !exists(${_file})
@${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
.endif
.endfor
.for _user in ${USERS}
# _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin
@if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \
${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \
exit 1; \
fi
@IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \
uid=$$(($$uid+${UID_OFFSET})); \
gid=$$(($$gid+${GID_OFFSET})); \
class="$${class:+-L }$$class"; \
homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \
if ! ${PW} usershow $$login >/dev/null 2>&1; then \
${ECHO_MSG} "Creating user \`$$login' with uid \`$$uid'."; \
eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \
else \
${ECHO_MSG} "Using existing user \`$$login'."; \
fi; \
${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; fi" >> ${TMPPLIST}; \
case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \
done
.endfor
.if defined(GROUPS)
.for _group in ${GROUPS}
# _bgpd:*:130:
@IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
gid=$$(($$gid+${GID_OFFSET})); \
IFS=","; for _login in $$members; do \
list=`${PW} usershow $${_login} -P | ${SED} -ne 's/.*Groups: //p'`; \
${ECHO_MSG} "Setting \`$${_login}' groups to \`$$list$${list:+,}${_group}'."; \
${PW} usermod $${_login} -G $$list$${list:+,}${_group}; \
${ECHO_CMD} "@exec list=\`${PW} usershow $${_login} -P | ${SED} -ne 's/.*Groups: //p'\`; ${PW} usermod $${_login} -G \$${list},${_group}" >> ${TMPPLIST}; \
done; \
done
.endfor
.endif
.endif
.else
@${DO_NADA}
.endif
.endif
.if !defined(DISABLE_SECURITY_CHECK)
.if !target(security-check)
.if !defined(OLD_SECURITY_CHECK)
security-check:
# Scan PLIST for:
# 1. setugid files
# 2. accept()/recvfrom() which indicates network listening capability
# 3. insecure functions (gets/mktemp/tempnam/[XXX])
# 4. startup scripts, in conjunction with 2.
# 5. world-writable files/dirs
#
-@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \
${AWK} -v prefix='${PREFIX}' ' \
match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \
/^@/ { next; } \
/^\// { print; next; } \
{ print prefix "/" $$0; } \
' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \
${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
| ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \
${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
| ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \
${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
| ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \
| ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
if \
! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \
${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \
then \
www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
if [ ! -z "$${www_site}" ]; then \
${ECHO_MSG}; \
${ECHO_MSG} " For more information, and contact details about the security"; \
${ECHO_MSG} " status of this software, see the following webpage: "; \
${ECHO_MSG} "$${www_site}"; \
fi; \
fi
.else # i.e. defined(OLD_SECURITY_CHECK)
security-check:
# Scan PLIST for:
# 1. setugid files
# 2. accept()/recvfrom() which indicates network listening capability
# 3. insecure functions (gets/mktemp/tempnam/[XXX])
# 4. startup scripts, in conjunction with 2.
# 5. world-writable files/dirs
#
-@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.stupid \
${WRKDIR}/.PLIST.network ${WRKDIR}/.PLIST.writable; \
if [ -n "$$PORTS_AUDIT" ]; then \
stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam|strcpy|strcat|sprintf)$$'; \
else \
stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam)$$'; \
fi; \
for i in `${GREP} -v '^@' ${TMPPLIST}`; do \
if [ ! -L "${PREFIX}/$$i" -a -f "${PREFIX}/$$i" ]; then \
${OBJDUMP} -R ${PREFIX}/$$i > \
${WRKDIR}/.PLIST.objdump 2> /dev/null; \
if [ -s ${WRKDIR}/.PLIST.objdump ] ; then \
${EGREP} " $$stupid_functions_regexp" \
${WRKDIR}/.PLIST.objdump | ${AWK} '{print " " $$3}' | ${TR} -d '\n' \
> ${WRKDIR}/.PLIST.stupid; \
if [ -n "`${EGREP} ' (accept|recvfrom)$$' ${WRKDIR}/.PLIST.objdump`" ] ; then \
if [ -s ${WRKDIR}/.PLIST.stupid ]; then \
${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.network; \
${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.network; \
${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.network; \
else \
${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.network; \
fi; \
fi; \
fi; \
if [ -n "`${FIND} ${PREFIX}/$$i -prune \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2>/dev/null`" ]; then \
if [ -s ${WRKDIR}/.PLIST.stupid ]; then \
${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.setuid; \
${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.setuid; \
${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.setuid; \
else \
${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.setuid; \
fi; \
fi; \
fi; \
if [ ! -L "${PREFIX}/$$i" ]; then \
if [ -n "`${FIND} ${PREFIX}/$$i -prune -perm -0002 \! -type l 2>/dev/null`" ]; then \
${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.writable; \
fi; \
fi; \
done; \
${GREP} '^etc/rc.d/' ${TMPPLIST} > ${WRKDIR}/.PLIST.startup; \
if [ -s ${WRKDIR}/.PLIST.setuid -o -s ${WRKDIR}/.PLIST.network -o -s ${WRKDIR}/.PLIST.writable ]; then \
if [ -n "$$PORTS_AUDIT" ]; then \
${ECHO_MSG} "===> SECURITY REPORT (PARANOID MODE): "; \
else \
${ECHO_MSG} "===> SECURITY REPORT: "; \
fi; \
if [ -s ${WRKDIR}/.PLIST.setuid ] ; then \
${ECHO_MSG} " This port has installed the following binaries,"; \
${ECHO_MSG} " which execute with increased privileges."; \
${CAT} ${WRKDIR}/.PLIST.setuid; \
${ECHO_MSG}; \
fi; \
if [ -s ${WRKDIR}/.PLIST.network ] ; then \
${ECHO_MSG} " This port has installed the following files, which may act as network"; \
${ECHO_MSG} " servers and may therefore pose a remote security risk to the system."; \
${CAT} ${WRKDIR}/.PLIST.network; \
${ECHO_MSG}; \
if [ -s ${WRKDIR}/.PLIST.startup ] ; then \
${ECHO_MSG} " This port has installed the following startup scripts,"; \
${ECHO_MSG} " which may cause these network services to be started at boot time."; \
${SED} s,^,${PREFIX}/, < ${WRKDIR}/.PLIST.startup; \
${ECHO_MSG}; \
fi; \
fi; \
if [ -s ${WRKDIR}/.PLIST.writable ] ; then \
${ECHO_MSG} " This port has installed the following world-writable files/directories."; \
${CAT} ${WRKDIR}/.PLIST.writable; \
${ECHO_MSG}; \
fi; \
${ECHO_MSG} " If there are vulnerabilities in these programs there may be a security"; \
${ECHO_MSG} " risk to the system. The FreeBSD Project makes no guarantee about the"; \
${ECHO_MSG} " security of ports included in the Ports Collection."; \
${ECHO_MSG} " Please type 'make deinstall' to deinstall the port if this is a concern."; \
www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
if [ ! -z "$${www_site}" ]; then \
${ECHO_MSG}; \
${ECHO_MSG} " For more information, and contact details about the security"; \
${ECHO_MSG} " status of this software, see the following webpage: "; \
${ECHO_MSG} "$${www_site}"; \
fi; \
fi
.endif # !defined(OLD_SECURITY_CHECK)
.endif
.else # i.e. defined(DISABLE_SECURITY_CHECK)
security-check:
@${ECHO_MSG} " WARNING: Security check has been disabled."
.endif # !defined(DISABLE_SECURITY_CHECK)
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
# Please note that the order of the following targets is important, and
# should not be modified.
.if defined(CHROOTED)
_CHROOT_SEQ= post-chroot
.else
_CHROOT_SEQ=
.endif
_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \
check-categories check-makevars check-desktop-entries \
check-conflicts check-depends check-deprecated \
check-vulnerable check-license buildanyway-message \
options-message
_FETCH_DEP= check-sanity
_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \
do-fetch post-fetch post-fetch-script
_EXTRACT_DEP= fetch
_EXTRACT_SEQ= extract-message checksum extract-depends pre-extract \
pre-extract-script do-extract \
post-extract post-extract-script
_PATCH_DEP= extract
_PATCH_SEQ= ask-license patch-message patch-depends patch-dos2unix pre-patch \
pre-patch-script do-patch post-patch post-patch-script
_CONFIGURE_DEP= patch
_CONFIGURE_SEQ= build-depends lib-depends configure-message \
pre-configure pre-configure-script \
run-autotools do-configure post-configure post-configure-script
_BUILD_DEP= configure
_BUILD_SEQ= build-message pre-build pre-build-script do-build \
post-build post-build-script
_INSTALL_DEP= build
_INSTALL_SEQ= install-message run-depends lib-depends apply-slist pre-install \
pre-install-script generate-plist check-already-installed
_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
pre-su-install-script create-users-groups do-install \
install-desktop-entries install-license \
post-install post-install-script add-plist-info \
add-plist-docs add-plist-examples add-plist-data \
add-plist-post install-rc-script compress-man \
install-ldconfig-file fake-pkg security-check
_PACKAGE_DEP= install
_PACKAGE_SEQ= package-message pre-package pre-package-script \
do-package post-package-script
.if !target(post-chroot)
post-chroot:
@${DO_NADA}
.endif
.if !target(check-sanity)
check-sanity: ${_SANITY_SEQ}
.endif
# XXX MCL might need to move in loop below?
.if !target(fetch)
fetch: ${_FETCH_DEP} ${_FETCH_SEQ}
.endif
# Main logic. The loop generates 6 main targets and using cookies
# ensures that those already completed are skipped.
.for target in extract patch configure build install package
.if !target(${target}) && defined(_OPTIONS_OK)
${target}: ${${target:U}_COOKIE}
.elif !target(${target})
${target}: config-conditional
@cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${__softMAKEFLAGS} ${${target:U}_COOKIE}
.elif target(${target}) && defined(IGNORE)
.endif
.if !exists(${${target:U}_COOKIE})
.if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER)
.if defined(USE_SUBMAKE)
${${target:U}_COOKIE}: ${_${target:U}_DEP}
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ}
.else
${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ}
.endif
@${ECHO_MSG} "===> Switching to root credentials for '${target}' target"
@cd ${.CURDIR} && \
${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SUSEQ}"
@${ECHO_MSG} "===> Returning to user credentials"
@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
.elif defined(USE_SUBMAKE)
${${target:U}_COOKIE}: ${_${target:U}_DEP}
@cd ${.CURDIR} && \
${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
.else
${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
.endif
.else
${${target:U}_COOKIE}::
@if [ -e ${.TARGET} ]; then \
${DO_NADA}; \
else \
cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET}; \
fi
.endif
.endfor
# Enforce order for -jN builds
.ORDER: ${_SANITY_SEQ}
.ORDER: ${_FETCH_DEP} ${_FETCH_SEQ}
.ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ}
.ORDER: ${_PATCH_DEP} ${_PATCH_SEQ}
.ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ}
.ORDER: ${_BUILD_DEP} ${_BUILD_SEQ}
.ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ}
.ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ}
extract-message:
@${ECHO_MSG} "===> Extracting for ${PKGNAME}"
patch-message:
@${ECHO_MSG} "===> Patching for ${PKGNAME}"
configure-message:
@${ECHO_MSG} "===> Configuring for ${PKGNAME}"
build-message:
@${ECHO_MSG} "===> Building for ${PKGNAME}"
install-message:
@${ECHO_MSG} "===> Installing for ${PKGNAME}"
package-message:
@${ECHO_MSG} "===> Building package for ${PKGNAME}"
# Empty pre-* and post-* targets
.for stage in pre post
.for name in check-sanity fetch extract patch configure build install package
.if !target(${stage}-${name})
${stage}-${name}:
@${DO_NADA}
.endif
.if !target(${stage}-${name}-script)
${stage}-${name}-script:
@if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/-script$//}; \
fi
.endif
.endfor
.endfor
# Special cases for su
.if !target(pre-su-install)
pre-su-install:
@${DO_NADA}
.endif
.if !target(pre-su-install-script)
pre-su-install-script:
@${DO_NADA}
.endif
.if !target(pretty-print-www-site)
pretty-print-www-site:
@www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \
if [ -n "$${www_site}" ]; then \
${ECHO_MSG} -n " and/or visit the "; \
${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \
${ECHO_MSG} " for futher informations"; \
fi
.endif
################################################################
# Some more targets supplied for users' convenience
################################################################
# Checkpatch
#
# Special target to verify patches
.if !target(checkpatch)
checkpatch:
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ}
.endif
# Reinstall
#
# Special target to re-run install
.if !target(reinstall)
reinstall:
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
@cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} install
.endif
# Deinstall
#
# Special target to remove installation
.if !target(deinstall)
deinstall:
.if ${UID} != 0 && !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
@cd ${.CURDIR} && \
${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}"
@${ECHO_MSG} "===> Returning to user credentials"
.else
@${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
@found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
for p in $${found_names}; do \
check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \
if [ "$${check_name}" = "${PKGBASE}" ]; then \
prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
if [ "x${PREFIX}" = "x$${prfx}" ]; then \
${ECHO_MSG} "===> Deinstalling $${p}"; \
${PKG_DELETE} -f $${p}; \
else \
${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \
fi; \
fi; \
done; \
if [ -z "$${found_names}" ]; then \
${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \
fi
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif
.endif
# Deinstall-all
#
# Special target to remove installation of all ports of the same origin
.if !target(deinstall-all)
deinstall-all:
.if ${UID} != 0 && !defined(INSTALL_AS_USER)
@${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
@cd ${.CURDIR} && \
${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}"
@${ECHO_MSG} "===> Returning to user credentials"
.else
@${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
@deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \
deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \
done; \
if [ -n "$${deinstall_names}" ]; then \
for d in $${deinstall_names}; do \
${ECHO_MSG} "===> Deinstalling $${d}"; \
${PKG_DELETE} -f $${d}; \
done; \
else \
${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \
fi; \
${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif
.endif
# Cleaning up
.if !target(do-clean)
do-clean:
@if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
fi; \
fi
.endif
.if !target(clean)
clean:
.if !defined(NOCLEANDEPENDS)
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} limited-clean-depends
.endif
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
.if target(pre-clean)
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-clean
.endif
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} do-clean
.if target(post-clean)
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} post-clean
.endif
.endif
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.if !target(distclean)
distclean: pre-distclean clean
@cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}"
.endif
.if !target(delete-distfiles)
delete-distfiles:
@${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}"
@(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \
cd ${_DISTDIR}; \
for file in ${RESTRICTED_FILES}; do \
${RM} -f $${file}; \
dir=$${file%/*}; \
if [ "$${dir}" != "$${file}" ]; then \
${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \
fi; \
done; \
fi)
.if defined(DIST_SUBDIR)
-@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE}
.endif
.endif
.if !target(delete-distfiles-list)
delete-distfiles-list:
@${ECHO_CMD} "# ${PKGNAME}"
@if [ "X${RESTRICTED_FILES}" != "X" ]; then \
for file in ${RESTRICTED_FILES}; do \
${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \
dir=$${file%/*}; \
if [ "$${dir}" != "$${file}" ]; then \
${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \
fi; \
done; \
fi
.if defined(DIST_SUBDIR)
@${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}"
.endif
.endif
# Prints out a list of files to fetch (useful to do a batch fetch)
.if !target(fetch-list)
fetch-list:
@${MKDIR} ${_DISTDIR}
@(cd ${_DISTDIR}; \
${_MASTER_SITES_ENV} ; \
for _file in ${DISTFILES}; do \
file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
if [ ! -f $$file -a ! -f $${file##*/} ]; then \
if [ ! -z "$$select" ] ; then \
__MASTER_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
fi; \
done; \
___MASTER_SITES_TMP= ; \
SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \
if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \
continue; \
fi; \
fi; \
DIR=${DIST_SUBDIR};\
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
done; \
${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
fi; \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
${_PATCH_SITES_ENV} ; \
for _file in ${PATCHFILES}; do \
file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
if [ ! -f $$file -a ! -f $${file##*/} ]; then \
if [ ! -z "$$select" ] ; then \
__PATCH_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
fi; \
done; \
___PATCH_SITES_TMP= ; \
SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
done; \
${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
fi; \
done)
.endif
.endif
.if !target(fetch-url-list-int)
fetch-url-list-int:
@${MKDIR} ${_DISTDIR}
@(cd ${_DISTDIR}; \
${_MASTER_SITES_ENV}; \
for _file in ${DISTFILES}; do \
file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ ! -z "$$select" ] ; then \
__MASTER_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
fi \
done; \
___MASTER_SITES_TMP= ; \
SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
fi ; \
for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
DIR=${DIST_SUBDIR}; \
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${DISTINFO_FILE} | ${AWK} '{print $$4}'`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
${ECHO_CMD} $${args} ; \
done; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
${_PATCH_SITES_ENV} ; \
for _file in ${PATCHFILES}; do \
file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ ! -z "$$select" ] ; then \
__PATCH_SITES_TMP= ; \
for group in $$select; do \
if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
fi \
done; \
___PATCH_SITES_TMP= ; \
SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
else \
SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
fi ; \
for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
DIR=${DIST_SUBDIR}; \
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${DISTINFO_FILE} | ${AWK} '{print $$4}'`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
esac; \
${ECHO_CMD} $${args} ; \
done; \
fi \
done)
.endif
.endif
.if !target(fetch-urlall-list)
fetch-urlall-list:
@LISTALL=yes ${MAKE} fetch-url-list-int
.endif
.if !target(fetch-url-list)
fetch-url-list:
@${MAKE} fetch-url-list-int
.endif
# Generates patches.
update-patches:
@toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \
PATCHDIR=${PATCHDIR} \
PATCH_LIST=${PATCHDIR}/patch-* \
DIFF_ARGS=${DIFF_ARGS} \
DISTORIG=${DISTORIG} \
${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \
case $$toedit in "");; \
*) ${ECHO_CMD} -n 'edit patches: '; read i; \
cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac
# Checksumming utilities
check-checksum-algorithms:
@ \
${checksum_init} \
\
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
eval alg_executable=\$$$$alg; \
if [ -z "$$alg_executable" ]; then \
${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \
${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \
exit 1; \
fi; \
done; \
checksum_init=\
SHA256=${SHA256}; \
MD5=${MD5};
.if !target(makesum)
makesum: check-checksum-algorithms
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes \
DISABLE_SIZE=yes
@if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi
@( \
cd ${DISTDIR}; \
\
${checksum_init} \
\
for file in ${_CKSUMFILES}; do \
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
eval alg_executable=\$$$$alg; \
\
if [ $$alg_executable != "NO" ]; then \
$$alg_executable $$file >> ${DISTINFO_FILE}; \
fi; \
done; \
if [ -z "${NO_SIZE}" ]; then \
${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${DISTINFO_FILE}; \
fi; \
done \
)
@for file in ${_IGNOREFILES}; do \
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \
done; \
done
.endif
.if !target(checksum)
checksum: fetch check-checksum-algorithms
@${checksum_init} \
if [ -f ${DISTINFO_FILE} ]; then \
cd ${DISTDIR}; OK="";\
for file in ${_CKSUMFILES}; do \
ignored="true"; \
_file=$${file#${DIST_SUBDIR}/*}; \
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
ignore="false"; \
eval alg_executable=\$$$$alg; \
\
if [ $$alg_executable != "NO" ]; then \
MKSUM=`$$alg_executable < $$file`; \
CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
else \
ignore="true"; \
fi; \
\
if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \
${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \
ignore="true"; \
fi; \
\
if [ "$$CKSUM" = "IGNORE" ]; then \
${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
ignore="true"; \
OK=${FALSE}; \
fi; \
\
if [ $$ignore = "false" ]; then \
match="false"; \
for chksum in $$CKSUM; do \
if [ "$$chksum" = "$$MKSUM" ]; then \
match="true"; \
break; \
fi; \
done; \
if [ $$match = "true" ]; then \
${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \
ignored="false"; \
else \
${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \
refetchlist="$$refetchlist$$file "; \
OK="$${OK:-retry}"; \
ignored="false"; \
fi; \
fi; \
done; \
\
if [ $$ignored = "true" ]; then \
${ECHO_MSG} "=> No suitable checksum found for $$file."; \
OK="${FALSE}"; \
fi; \
\
done; \
\
for file in ${_IGNOREFILES}; do \
_file=$${file#${DIST_SUBDIR}/*}; \
ignored="true"; \
alreadymatched="false"; \
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
ignore="false"; \
eval alg_executable=\$$$$alg; \
\
if [ $$alg_executable != "NO" ]; then \
CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
else \
ignore="true"; \
fi; \
\
if [ $$ignore = "false" ]; then \
if [ -z "$$CKSUM" ]; then \
${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \
OK="$$alreadymatched"; \
elif [ $$CKSUM != "IGNORE" ]; then \
${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
else \
ignored="false"; \
alreadymatched="true"; \
fi; \
fi; \
done; \
\
if ( [ $$ignored = "true" ]) ; then \
${ECHO_MSG} "=> No suitable checksum found for $$file."; \
OK="false"; \
fi; \
\
done; \
\
if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \
${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \
if ( cd ${.CURDIR} && \
${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \
if ( cd ${.CURDIR} && \
${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \
OK="true"; \
fi; \
fi; \
fi; \
\
if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \
${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \
${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \
${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
fi; \
if [ "$$OK" != "true" ]; then \
exit 1; \
fi; \
elif [ -n "${_CKSUMFILES:M*}" ]; then \
${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \
fi
.endif
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# Nobody should want to override this unless PKGNAME is simply bogus.
.if !target(package-name)
package-name:
@${ECHO_CMD} ${PKGNAME}
.endif
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
@${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.if !target(package-noinstall)
package-noinstall:
@${MKDIR} ${WRKDIR}
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-package \
pre-package-script do-package post-package-script
@${RM} -f ${TMPPLIST}
-@${RMDIR} ${WRKDIR}
.endif
################################################################
# Dependency checking
################################################################
.if !target(depends)
depends: extract-depends patch-depends lib-depends fetch-depends build-depends run-depends
.if defined(ALWAYS_BUILD_DEPENDS)
_DEPEND_ALWAYS= 1
.else
_DEPEND_ALWAYS= 0
.endif
_INSTALL_DEPENDS= \
if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \
subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \
${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \
${PKG_ADD} $${subpkgfile}; \
else \
(cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
fi; \
else \
(cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
fi; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}";
.for deptype in EXTRACT PATCH FETCH BUILD RUN
${deptype:L}-depends:
.if defined(${deptype}_DEPENDS)
.if !defined(NO_DEPENDS)
@for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \
prog=`${ECHO_CMD} $$i | ${SED} -e 's/:.*//'`; \
if [ -z "$$prog" ]; then \
${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \
break; \
fi; \
dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
target=`${ECHO_CMD} $$dir | ${SED} -e 's/.*://'`; \
dir=`${ECHO_CMD} $$dir | ${SED} -e 's/:.*//'`; \
if [ X${DEPENDS_PRECLEAN} != "X" ]; then \
target="clean $$target"; \
depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
fi; \
if [ X${DEPENDS_CLEAN} != "X" ]; then \
target="$$target clean"; \
depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
fi; \
else \
target="${DEPENDS_TARGET}"; \
depends_args="${DEPENDS_ARGS}"; \
fi; \
if ${EXPR} "$$prog" : \\/ >/dev/null; then \
if [ -e "$$prog" ]; then \
if [ "$$prog" = "${NONEXISTENT}" ]; then \
${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \
${FALSE}; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
if [ ${_DEPEND_ALWAYS} = 1 ]; then \
${ECHO_MSG} " (but building it anyway)"; \
notfound=1; \
else \
notfound=0; \
fi; \
fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
notfound=1; \
fi; \
else \
case $${prog} in \
*\>*|*\<*|*=*) pkg=yes;; \
*) pkg="";; \
esac; \
if [ "$$pkg" != "" ]; then \
if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \
${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \
if [ ${_DEPEND_ALWAYS} = 1 ]; then \
${ECHO_MSG} " (but building it anyway)"; \
notfound=1; \
else \
notfound=0; \
fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \
notfound=1; \
fi; \
if [ $$notfound != 0 ]; then \
inverse_dep=`${ECHO_CMD} $$prog | ${SED} \
-e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \
-e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \
pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \
if [ "$$pkg_info" != "" ]; then \
${ECHO_MSG} "===> Found $$pkg_info, but you need to upgrade to $$prog."; \
exit 1; \
fi; \
fi; \
elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
if [ ${_DEPEND_ALWAYS} = 1 ]; then \
${ECHO_MSG} " (but building it anyway)"; \
notfound=1; \
else \
notfound=0; \
fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
notfound=1; \
fi; \
fi; \
if [ $$notfound != 0 ]; then \
${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} " => No directory for $$prog. Skipping.."; \
else \
${_INSTALL_DEPENDS} \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
.endfor
lib-depends:
.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS)
@for i in ${LIB_DEPENDS}; do \
lib=$${i%%:*}; \
pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\
dir=$${i#*:}; \
target=$${i##*:}; \
if ${TEST} $$dir = $$target; then \
target="${DEPENDS_TARGET}"; \
depends_args="${DEPENDS_ARGS}"; \
else \
dir=$${dir%%:*}; \
fi; \
${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \
if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
${ECHO_MSG} " - found"; \
if [ ${_DEPEND_ALWAYS} = 1 ]; then \
${ECHO_MSG} " (but building it anyway)"; \
notfound=1; \
else \
notfound=0; \
fi; \
else \
${ECHO_MSG} " - not found"; \
notfound=1; \
fi; \
if [ $$notfound != 0 ]; then \
${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} " => No directory for $$lib. Skipping.."; \
else \
${_INSTALL_DEPENDS} \
if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
${FALSE}; \
fi; \
fi; \
fi; \
done
.endif
.endif
# Dependency lists: both build and runtime, recursive. Print out directory names.
_UNIFIED_DEPENDS=${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}
_DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,}
all-depends-list:
@${ALL-DEPENDS-LIST}
ALL-DEPENDS-LIST= \
L="${_DEPEND_DIRS}"; \
checked=""; \
while [ -n "$$L" ]; do \
l=""; \
for d in $$L; do \
case $$checked in \
$$d\ *|*\ $$d\ *|*\ $$d) \
continue;; \
esac; \
checked="$$checked $$d"; \
if [ ! -d $$d ]; then \
${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
continue; \
fi; \
${ECHO_CMD} $$d; \
if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\
${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
continue; \
fi; \
for child in $$children; do \
case "$$checked $$l" in \
$$child\ *|*\ $$child\ *|*\ $$child) \
continue;; \
esac; \
l="$$l $$child"; \
done; \
done; \
L=$$l; \
done
CLEAN-DEPENDS-FULL= \
L="${_DEPEND_DIRS}"; \
checked=""; \
while [ -n "$$L" ]; do \
l=""; \
for d in $$L; do \
case $$checked in \
$$d\ *|*\ $$d\ *|*\ $$d) \
continue;; \
esac; \
checked="$$checked $$d"; \
if [ ! -d $$d ]; then \
${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
continue; \
fi; \
if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
continue; \
fi; \
state=0; \
for child in $$children; do \
case $$state in \
0) \
if [ -d $$child ]; then \
${ECHO_CMD} $$d; \
fi; \
state=1;; \
1) \
case "$$checked $$l" in \
$$child\ *|*\ $$child\ *|*\ $$child) \
continue;; \
esac; \
l="$$l $$child";; \
esac; \
done; \
done; \
L=$$l; \
done
CLEAN-DEPENDS-LIMITED= \
L="${_DEPEND_DIRS}"; \
checked=""; \
while [ -n "$$L" ]; do \
l=""; \
for d in $$L; do \
case $$checked in \
$$d\ *|*\ $$d\ *|*\ $$d) \
continue;; \
esac; \
checked="$$checked $$d"; \
if [ ! -d $$d ]; then \
${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
continue; \
fi; \
if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
continue; \
fi; \
state=0; \
for child in $$children; do \
case $$state in \
0) \
if [ ! -d $$child ]; then \
break; \
fi; \
state=1; \
${ECHO_CMD} $$d;; \
1) \
case "$$checked $$l" in \
$$child\ *|*\ $$child\ *|*\ $$child) \
continue;; \
esac; \
l="$$l $$child";; \
esac; \
done; \
done; \
L=$$l; \
done
.if !target(clean-depends)
clean-depends:
@for dir in $$(${CLEAN-DEPENDS-FULL}); do \
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
done
.endif
.if !target(limited-clean-depends)
limited-clean-depends:
@for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
done
.endif
.if !target(deinstall-depends)
deinstall-depends:
@for dir in $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} deinstall); \
done
.endif
.if !target(fetch-recursive)
fetch-recursive:
@${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies"
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} fetch); \
done
.endif
.if !target(fetch-recursive-list)
fetch-recursive-list:
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} fetch-list); \
done
.endif
# Used by fetch-required and fetch-required list, this script looks
# at each of the dependencies. If 3 items are specified in the tuple,
# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo)
# is examined. Only if it begins with a / and does not exist on the
# file-system will ``make targ'' proceed.
# For more usual (dual-item) dependency tuples, the ``make targ''
# proceeds, if the exact package, which the directory WOULD'VE installed,
# is not yet installed.
# This is the exact behaviour of the old code, and it may need
# revisiting. For example, the entire first case seems dubious, and in
# the second case we, probably, should be satisfied with _any_ (earlier)
# package, with the same origin as that of the dir.
#
# -mi
FETCH_LIST?= for i in $$deps; do \
prog=$${i%%:*}; dir=$${i\#*:}; \
case $$dir in \
*:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \
dir=$${dir%%:*}; \
else \
continue; \
fi;; \
*) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \
continue; \
fi;; \
esac; \
echo cd $$dir; cd $$dir; ${MAKE} $$targ; \
done
.if !target(fetch-required)
fetch-required: fetch
.if defined(NO_DEPENDS)
@${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any distfiles for ${PKG_NAME}"
.else
@${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies"
.for deptype in EXTRACT PATCH FETCH BUILD RUN
.if defined(${deptype}_DEPENDS)
@targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
.endif
.endfor
.endif
.endif
.if !target(fetch-required-list)
fetch-required-list: fetch-list
.if !defined(NO_DEPENDS)
.for deptype in EXTRACT PATCH FETCH BUILD RUN
.if defined(${deptype}_DEPENDS)
@targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
.endif
.endfor
.endif
.endif
.if !target(checksum-recursive)
checksum-recursive:
@${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies"
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} checksum); \
done
.endif
# Dependency lists: build and runtime. Print out directory names.
build-depends-list:
.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
@${BUILD-DEPENDS-LIST}
.endif
BUILD-DEPENDS-LIST= \
for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \
if [ -d $$dir ]; then \
${ECHO_CMD} $$dir; \
else \
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
fi; \
done | ${SORT} -u
run-depends-list:
.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
@${RUN-DEPENDS-LIST}
.endif
RUN-DEPENDS-LIST= \
for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \
if [ -d $$dir ]; then \
${ECHO_CMD} $$dir; \
else \
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
fi; \
done | ${SORT} -u
# Package (recursive runtime) dependency list. Print out both directory names
# and package names.
package-depends-list:
.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
@${PACKAGE-DEPENDS-LIST}
.endif
_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS}
PACKAGE-DEPENDS-LIST?= \
if [ "${CHILD_DEPENDS}" ]; then \
installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \
${TRUE}); \
if [ "$$installed" ]; then \
break; \
fi; \
if [ -z "$$installed" ]; then \
installed="${PKGNAME}"; \
fi; \
for pkgname in $$installed; do \
${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \
done; \
fi; \
checked="${PARENT_CHECKED}"; \
for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
dir=$$(${REALPATH} $$dir); \
if [ -d $$dir ]; then \
case $$checked in \
$$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \
esac; \
childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \
set -- $$childout; \
childdir=""; \
while [ $$\# != 0 ]; do \
childdir="$$childdir $$2"; \
${ECHO_CMD} "$$1 $$2 $$3"; \
shift 3; \
done; \
checked="$$dir $$childdir $$checked"; \
else \
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
fi; \
done
ACTUAL-PACKAGE-DEPENDS?= \
if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \
origins=$$(for pkgname in ${PKG_DBDIR}/*; do \
if [ -e $$pkgname/+CONTENTS ]; then \
${ECHO_CMD} $${pkgname\#\#*/}; \
${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \
fi; \
done); \
for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
tmp=$${dir%/*}; \
dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
set -- $$origins; \
while [ $$\# -gt 1 ]; do \
if [ ! -d "${PORTSDIR}/$$2" ]; then \
shift; \
continue; \
fi; \
if [ "$$dir" = "$$2" ]; then \
${ECHO_CMD} $$1:$$dir; \
if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \
packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \
fi; \
break; \
fi; \
shift 2; \
done; \
done; \
[ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \
fi
# Print out package names.
package-depends:
@${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}'
actual-package-depends:
@${ACTUAL-PACKAGE-DEPENDS}
# Build packages for port and dependencies
package-recursive: package
@for dir in $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} package-noinstall); \
done
# Show missing dependiencies
missing:
@_origins=$$(${PKG_INFO} -aoq); \
for dir in $$(${ALL-DEPENDS-LIST}); do \
_origin=$${dir##${PORTSDIR}/}; \
if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \
${ECHO_CMD} $${_origin}; \
fi; \
done
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
# description-file|maintainer|categories|extract-depends| \
# patch-depends|fetch-depends|build-depends|run-depends|www site
#
# If this ever changes, portmgr should contact the portsnap maintainer
# first to avoid gratuitous breakage.
. if !target(describe)
_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
. if exists(${DESCR})
_DESCR=${DESCR}
. else
_DESCR=/dev/null
. endif
describe:
@${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \
${ECHO_CMD} -n ${COMMENT:Q}; \
${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \
while read one two discard; do \
case "$$one" in \
WWW:) case "$$two" in \
https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \
*) ${ECHO_CMD} -n "http://$$two" ;; \
esac; \
break; \
;; \
esac; \
done < ${DESCR}; ${ECHO_CMD}
. endif
www-site:
.if exists(${DESCR})
@${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1
.else
@${ECHO_CMD}
.endif
.if !target(readmes)
readmes: readme
.endif
.if !target(readme)
readme:
@${RM} -f ${.CURDIR}/README.html
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.CURDIR}/README.html
.endif
${.CURDIR}/README.html:
@${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
@__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \
${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \
-e 's|%%PKG%%|${PKGNAME}|g' \
-e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \
-e '/%%COMMENT%%/d' \
-e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \
${SED} -e 's|${.CURDIR}/||')"'|' \
-e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \
${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \
-e 's|%%MAINTAINER%%|${MAINTAINER}|g' \
-e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
$${__softMAKEFLAGS} pretty-print-www-site)"'|' \
-e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
$${__softMAKEFLAGS} pretty-print-build-depends-list)"'|' \
-e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \
$${__softMAKEFLAGS} pretty-print-run-depends-list)"'|' \
-e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \
${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \
${TEMPLATES}/README.port >> ${.TARGET}
# The following two targets require an up-to-date INDEX in ${PORTSDIR}
_PRETTY_PRINT_DEPENDS_LIST=\
if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \
else \
target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \
if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \
${ECHO_MSG} -n 'This port requires package(s) "' ; \
${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \
${ECHO_MSG} "\" to $$target."; \
fi;
.if !target(pretty-print-build-depends-list)
pretty-print-build-depends-list:
.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \
defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
@${_PRETTY_PRINT_DEPENDS_LIST}
.endif
.endif
.if !target(pretty-print-run-depends-list)
pretty-print-run-depends-list:
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS)
@${_PRETTY_PRINT_DEPENDS_LIST}
.endif
.endif
_SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
.if !target(apply-slist)
apply-slist:
.if defined(SUB_FILES)
.for file in ${SUB_FILES}
.if !exists(${FILESDIR}/${file}.in)
@${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1
.else
@${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file}
.endif
.endfor
.for i in pkg-message pkg-install pkg-deinstall pkg-req
.if ${SUB_FILES:M${i}*}!=""
${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*}
.endif
.endfor
.endif
.endif
# Generate packing list. Also tests to make sure all required package
# files exist.
.if !target(generate-plist)
generate-plist:
@${ECHO_MSG} "===> Generating temporary packing list"
@${MKDIR} `${DIRNAME} ${TMPPLIST}`
@if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi
@>${TMPPLIST}
@for file in ${PLIST_FILES}; do \
${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \
done
@for man in ${__MANPAGES}; do \
${ECHO_CMD} $${man} >> ${TMPPLIST}; \
done
.for _PREFIX in ${PREFIX}
.if ${_TMLINKS:M${_PREFIX}*}x != x
@for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \
${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
done
.endif
.if ${_TMLINKS:N${_PREFIX}*}x != x
@${ECHO_CMD} @cwd / >> ${TMPPLIST}
@for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \
${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
done
@${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST}
.endif
@for i in $$(${ECHO_CMD} ${__MANPAGES} ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||} ' ' | ${SED} -E -e 's|man([1-9ln])/([^/ ]+) |cat\1/\2 |g'); do \
${ECHO_CMD} "@unexec rm -f %D/$$i %D/$${i%.gz} %D/$${i%.bz2} %D/$$i.gz %D/$$i.bz2" >> ${TMPPLIST}; \
done
.endfor
@if [ -f ${PLIST} ]; then \
${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \
fi
.for dir in ${PLIST_DIRS}
@${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST}
.endfor
.for dir in ${PLIST_DIRSTRY}
@${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrmtry ,' >> ${TMPPLIST}
.endfor
.for reinplace in ${PLIST_REINPLACE}
.if defined(PLIST_REINPLACE_${reinplace:U})
@${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
.endif
.endfor
.if defined(USE_LINUX_PREFIX)
.if defined(USE_LDCONFIG)
@${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST}
.endif
.else
.if defined(USE_LDCONFIG)
.if !defined(INSTALL_AS_USER)
@${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST}
.else
@${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST}
.endif
.endif
.if defined(USE_LDCONFIG32)
.if !defined(INSTALL_AS_USER)
@${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST}
.else
@${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST}
.endif
.endif
.endif
.endif
${TMPPLIST}:
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} generate-plist
.if !target(add-plist-docs)
add-plist-docs:
.if defined(PORTDOCS) && !defined(NOPORTDOCS)
@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
[ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
fi
.for x in ${PORTDOCS}
@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
if [ ! -e ${DOCSDIR}/${x} ]; then \
${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \
fi;fi
.endfor
@${FIND} -P ${PORTDOCS:S/^/${DOCSDIR}\//} ! -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
@${FIND} -P -d ${PORTDOCS:S/^/${DOCSDIR}\//} -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
@${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST}
.else
@${DO_NADA}
.endif
.endif
.if !target(add-plist-examples)
add-plist-examples:
.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES)
@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
[ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
fi
.for x in ${PORTEXAMPLES}
@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
if [ ! -e ${EXAMPLESDIR}/${x} ]; then \
${ECHO_CMD} ${EXAMPLESDIR}/${x} | \
${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
fi;fi
.endfor
@${FIND} -P ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
@${FIND} -P -d ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
@${ECHO_CMD} "@dirrm ${EXAMPLESDIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
.else
@${DO_NADA}
.endif
.endif
.if !target(add-plist-data)
add-plist-data:
.if defined(PORTDATA) && !defined(NOPORTDATA)
@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
[ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
fi
.for x in ${PORTDATA}
@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
if [ ! -e ${DATADIR}/${x} ]; then \
${ECHO_CMD} ${DATADIR}/${x} | \
${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
fi;fi
.endfor
@${FIND} -P ${PORTDATA:S/^/${DATADIR}\//} ! -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
@${FIND} -P -d ${PORTDATA:S/^/${DATADIR}\//} -type d 2>/dev/null | \
${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
@${ECHO_CMD} "@dirrm ${DATADIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
.else
@${DO_NADA}
.endif
.endif
.if !target(add-plist-info)
add-plist-info:
# Process GNU INFO files at package install/deinstall time
.if defined(INFO)
.for i in ${INFO}
install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir
@${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
>> ${TMPPLIST}
@${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/::g >> ${TMPPLIST}
@${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
>> ${TMPPLIST}
.endfor
.if defined(INFO_SUBDIR)
@${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST}
.endif
.if (${PREFIX} != "/usr")
@${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST}
.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE})
@${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST}
.endif
.endif
.endif
.endif
# If we're installing into a non-standard PREFIX, we need to remove that directory at
# deinstall-time
.if !target(add-plist-post)
add-plist-post:
.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr")
@${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST}
.else
@${DO_NADA}
.endif
.endif
.if !target(install-rc-script)
install-rc-script:
.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
.if defined(USE_RCORDER)
@${ECHO_MSG} "===> Installing early rc.d startup script(s)"
@${ECHO_CMD} "@cwd /" >> ${TMPPLIST}
@for i in ${USE_RCORDER}; do \
${INSTALL_SCRIPT} ${WRKDIR}/$${i} /etc/rc.d/$${i%.sh}; \
${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
done
@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
.endif
.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
@${ECHO_MSG} "===> Installing rc.d startup script(s)"
@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
@for i in ${USE_RC_SUBR}; do \
${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}; \
${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
done
.endif
.else
@${DO_NADA}
.endif
.endif
# Compress (or uncompress) and symlink manpages.
.if !target(compress-man)
compress-man:
.if defined(_MANPAGES) || defined(_MLINKS)
.if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS)
@${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
@_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE}
.elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS)
@${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
@_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE}
.endif
.if defined(_MLINKS)
@set -- ${_MLINKS}; \
while :; do \
[ $$# -eq 0 ] && break || ${TRUE}; \
${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \
z=split($$1, a, /\//); x=split($$2, b, /\//); \
while (a[i] == b[i]) i++; \
for (q=i; q<x; q++) printf "../"; \
for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
shift; shift; \
done
.endif
.else
@${DO_NADA}
.endif
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
.if !defined(NO_PKG_REGISTER)
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
@${RM} -f /tmp/${PKGNAME}-required-by
.if defined(FORCE_PKG_REGISTER)
@if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \
${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \
fi
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
.endif
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
if [ -f ${PKGINSTALL} ]; then \
${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
fi; \
if [ -f ${PKGDEINSTALL} ]; then \
${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
fi; \
if [ -f ${PKGREQ} ]; then \
${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
fi; \
if [ -f ${PKGMESSAGE} ]; then \
${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
fi; \
for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \
if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
>/dev/null 2>&1; then \
${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
fi; \
fi; \
done; \
fi
.if !defined(NO_MTREE)
@if [ -f ${MTREE_FILE} ]; then \
${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \
fi
.endif
@if [ -e /tmp/${PKGNAME}-required-by ]; then \
${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \
${RM} -f /tmp/${PKGNAME}-required-by; \
fi
.else
@${DO_NADA}
.endif
.endif
# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif
.if !defined(NOPRECIOUSSOFTMAKEVARS)
.for softvar in CKSUMFILES _MLINKS
.if defined(${softvar})
__softMAKEFLAGS+= '${softvar}+=${${softvar}:S/'/'\''/g}'
.endif
.endfor
.endif
.if !defined(NOPRECIOUSMAKEVARS)
# These won't change, so we can pass them through the environment
.MAKEFLAGS: \
ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}"
.endif
.if !target(config)
config:
.if !defined(OPTIONS)
@${ECHO_MSG} "===> No options to configure"
.else
.if ${OPTIONSFILE} != ${OPTIONSFILE}
@${ECHO_MSG} "===> Using wrong configuration file ${OPTIONSFILE}"
@exit 1
.endif
.if ${UID} != 0 && !defined(INSTALL_AS_USER)
@optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \
(${SU_CMD} "${SH} -c \"${MKDIR} $${optionsdir} 2> /dev/null\"") || \
(${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \
${ECHO_MSG} "===> Returning to user credentials"
.else
@(optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
${MKDIR} $${optionsdir} 2> /dev/null) || \
(${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1)
.endif
-@if [ -e ${OPTIONSFILE} ]; then \
. ${OPTIONSFILE}; \
fi; \
set -- ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
OPTIONSLIST="$${OPTIONSLIST} $$1"; \
defaultval=$$3; \
withvar=WITH_$$1; \
withoutvar=WITHOUT_$$1; \
withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
if [ ! -z "$${withval}" ]; then \
val=on; \
elif [ ! -z "$${withoutval}" ]; then \
val=off; \
else \
val=$$3; \
fi; \
DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \
shift 3; \
done; \
TMPOPTIONSFILE=$$(mktemp -t portoptions); \
trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
${SH} -c "${DIALOG} --checklist \"Options for ${PKGNAME:C/-([^-]+)$/ \1/}\" 21 70 15 $${DEFOPTIONS} 2> $${TMPOPTIONSFILE}"; \
status=$$?; \
if [ $${status} -ne 0 ] ; then \
${RM} -f $${TMPOPTIONSFILE}; \
${ECHO_MSG} "===> Options unchanged"; \
exit 0; \
fi; \
if [ ! -e ${TMPOPTIONSFILE} ]; then \
${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \
exit 0; \
fi; \
SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \
${RM} -f $${TMPOPTIONSFILE}; \
TMPOPTIONSFILE=$$(mktemp -t portoptions); \
trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \
${ECHO_CMD} "# No user-servicable parts inside!" >> $${TMPOPTIONSFILE}; \
${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \
${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \
for i in $${OPTIONSLIST}; do \
${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; \
if [ $$? -eq 0 ]; then \
${ECHO_CMD} WITH_$${i}=true >> $${TMPOPTIONSFILE}; \
else \
${ECHO_CMD} WITHOUT_$${i}=true >> $${TMPOPTIONSFILE}; \
fi; \
done; \
if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
${ECHO_MSG} "===> Switching to root credentials to write ${OPTIONSFILE}"; \
${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}"; \
${ECHO_MSG} "===> Returning to user credentials"; \
else \
${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}; \
fi; \
${RM} -f $${TMPOPTIONSFILE}
.endif
.endif
.if !target(config-recursive)
config-recursive:
@${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies";
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} config-conditional); \
done
.endif
.if !target(config-conditional)
config-conditional:
.if defined(OPTIONS)
.if exists(${OPTIONSFILE})
# scan saved options and invalidate them, if the set of options does not match
@. ${OPTIONSFILE}; \
set ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
withvar=WITH_$$1; \
withoutvar=WITHOUT_$$1; \
withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
if [ ! -z "$${withval}" ]; then \
val=on; \
elif [ ! -z "$${withoutval}" ]; then \
val=off; \
else \
val=missing; \
fi; \
if [ "$${val}" = "missing" ]; then \
OPTIONS_INVALID=yes; \
fi; \
shift 3; \
done; \
if [ "$${OPTIONS_INVALID}" = "yes" ]; then \
cd ${.CURDIR} && ${MAKE} config; \
fi;
.else
cd ${.CURDIR} && ${MAKE} config;
.endif
.endif
.endif
.if !target(showconfig)
showconfig:
.if defined(OPTIONS)
@${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}:"
-@if [ -e ${OPTIONSFILE} ]; then \
. ${OPTIONSFILE}; \
fi; \
set -- ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
defaultval=$$3; \
withvar=WITH_$$1; \
withoutvar=WITHOUT_$$1; \
withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
if [ ! -z "$${withval}" ]; then \
val=on; \
elif [ ! -z "$${withoutval}" ]; then \
val=off; \
else \
val="$$3 (default)"; \
fi; \
${ECHO_MSG} " $$1=$${val} \"$$2\""; \
shift 3; \
done
@${ECHO_MSG} "===> Use 'make config' to modify these settings"
.endif
.endif
.if !target(showconfig-recursive)
showconfig-recursive:
@${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies";
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} showconfig); \
done
.endif
.if !target(rmconfig)
rmconfig:
.if defined(OPTIONS) && exists(${OPTIONSFILE})
-@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \
optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \
${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \
${RMDIR} $${optionsdir}"; \
${ECHO_MSG} "===> Returning to user credentials"; \
else \
${RM} -f ${OPTIONSFILE}; \
${RMDIR} $${optionsdir}; \
fi
.else
@${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}"
.endif
.endif
.if !target(rmconfig-recursive)
rmconfig-recursive:
@${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies";
@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
(cd $$dir; ${MAKE} rmconfig); \
done
.endif
desktop-categories:
@categories=""; \
for native_category in ${CATEGORIES}; do \
c=""; \
case $$native_category in \
accessibility) c="Accessibility Utility" ;; \
archivers) c="Archiving" ;; \
astro) c="Astronomy Science Education" ;; \
audio) c="Audio AudioVideo" ;; \
benchmarks) c="System" ;; \
biology) c="Biology Science Education" ;; \
cad) c="Engineering" ;; \
databases) c="Database" ;; \
deskutils) c="Utility" ;; \
devel) c="Development" ;; \
dns) c="Network" ;; \
elisp) c="Development" ;; \
emulators) c="Emulator" ;; \
finance) c="Finance Office" ;; \
ftp) c="FileTransfer Network" ;; \
games) c="Game" ;; \
gnome) c="GNOME GTK" ;; \
graphics) c="Graphics" ;; \
hamradio) c="HamRadio" ;; \
haskell) c="Development" ;; \
ipv6) c="Network" ;; \
irc) c="IRCClient Network" ;; \
java) c="Java Development" ;; \
kde) c="KDE QT" ;; \
lang) c="Development" ;; \
lisp) c="Development" ;; \
mail) c="Email Office Network" ;; \
mbone) c="Network AudioVideo" ;; \
multimedia) c="AudioVideo" ;; \
net) c="Network" ;; \
net-im) c="InstantMessaging Network" ;; \
net-mgmt) c="Network" ;; \
net-p2p) c="P2P Network" ;; \
news) c="News" ;; \
pear) c="WebDevelopment Development" ;; \
perl5) c="Development" ;; \
python) c="Development" ;; \
ruby) c="Development" ;; \
rubygems) c="Development" ;; \
scheme) c="Development" ;; \
science) c="Science Education" ;; \
security) c="Security System" ;; \
shells) c="Shell" ;; \
sysutils) c="System Utility" ;; \
tcl*|tk*) c="Development" ;; \
www) c="Network" ;; \
x11-clocks) c="Clock Utility" ;; \
x11-fm) c="FileManager" ;; \
xfce) c="GTK" ;; \
zope) c="WebDevelopment Development" ;; \
esac; \
if [ -n "$$c" ]; then \
categories="$$categories $$c"; \
fi; \
done; \
if [ -n "$$categories" ]; then \
for c in Application $$categories; do ${ECHO_MSG} "$$c"; done \
| ${SORT} -u | ${TR} '\n' ';'; \
${ECHO_MSG}; \
fi
VALID_DESKTOP_CATEGORIES+= Application Core Development Building Debugger IDE \
GUIDesigner Profiling RevisionControl Translation Office Calendar \
ContactManagement Database Dictionary Chart Email Finance FlowChart PDA \
ProjectManagement Presentation Spreadsheet WordProcessor Graphics \
2DGraphics VectorGraphics RasterGraphics 3DGraphics Scanning OCR \
Photography Viewer Settings DesktopSettings HardwareSettings \
PackageManager Network Dialup InstantMessaging IRCClient FileTransfer \
HamRadio News P2P RemoteAccess Telephony WebBrowser WebDevelopment \
AudioVideo Audio Midi Mixer Sequencer Tuner Video TV AudioVideoEditing \
Player Recorder DiscBurning Game ActionGame AdventureGame ArcadeGame \
BoardGame BlocksGame CardGame KidsGame LogicGame RolePlaying Simulation \
SportsGame StrategyGame Education Art Construction Music Languages \
Science Astronomy Biology Chemistry Geology Math MedicalSoftware Physics \
Teaching Amusement Applet Archiving Electronics Emulator Engineering \
FileManager Shell Screensaver TerminalEmulator TrayIcon System Filesystem \
Monitor Security Utility Accessibility Calculator Clock TextEditor KDE \
GNOME GTK Qt Motif Java ConsoleOnly AdvancedSettings
check-desktop-entries:
.if defined(DESKTOP_ENTRIES)
@set -- ${DESKTOP_ENTRIES} XXX; \
if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \
exit 1; \
fi; \
num=1; \
while [ $$# -gt 6 ]; do \
entry="#$$num"; \
if [ -n "$$4" ]; then \
entry="$$entry ($$4)"; \
elif [ -n "$$1" ]; then \
entry="$$entry ($$1)"; \
fi; \
if [ -z "$$1" ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \
exit 1; \
fi; \
if [ -z "$$4" ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \
exit 1; \
fi; \
if [ -n "$$5" ]; then \
for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \
if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \
${ECHO_CMD} "${PKGNAME}: Makefile error: in desktop entry $$entry: category $$c is not a valid desktop category"; \
exit 1; \
fi; \
done; \
if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \
exit 1; \
fi; \
else \
if [ -z "`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`" ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \
exit 1; \
fi; \
fi; \
if [ -z "$$6" ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is empty"; \
exit 1; \
fi; \
if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ]; then \
${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\" or \"false\""; \
exit 1; \
fi; \
shift 6; \
num=`${EXPR} $$num + 1`; \
done
.else
@${DO_NADA}
.endif
.if !target(install-desktop-entries)
install-desktop-entries:
.if defined(DESKTOP_ENTRIES)
@(${MKDIR} "${DESKTOPDIR}" 2> /dev/null) || \
(${ECHO_MSG} "===> Cannot create ${DESKTOPDIR}, check permissions"; exit 1)
@set -- ${DESKTOP_ENTRIES} XXX; \
if [ -z "${_DESKTOPDIR_REL}" ]; then \
${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \
fi; \
while [ $$# -gt 6 ]; do \
filename="$$4.desktop"; \
pathname="${DESKTOPDIR}/$$filename"; \
categories="$$5"; \
if [ -z "$$categories" ]; then \
categories="`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`"; \
fi; \
${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \
${ECHO_CMD} "[Desktop Entry]" > $$pathname; \
${ECHO_CMD} "Type=Application" >> $$pathname; \
${ECHO_CMD} "Version=0.9.4" >> $$pathname; \
${ECHO_CMD} "Encoding=UTF-8" >> $$pathname; \
${ECHO_CMD} "Name=$$1" >> $$pathname; \
if [ -n "$$2" ]; then \
${ECHO_CMD} "Comment=$$2" >> $$pathname; \
fi; \
if [ -n "$$3" ]; then \
${ECHO_CMD} "Icon=$$3" >> $$pathname; \
fi; \
${ECHO_CMD} "Exec=$$4" >> $$pathname; \
${ECHO_CMD} "Categories=$$categories" >> $$pathname; \
${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \
shift 6; \
done; \
${ECHO_CMD} "@unexec rmdir ${DESKTOPDIR} 2>/dev/null || true" >> ${TMPPLIST}; \
if [ -z "${_DESKTOPDIR_REL}" ]; then \
${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
fi
.else
@${DO_NADA}
.endif
.endif
.if !target(check-license)
check-license:
@${DO_NADA}
.endif
.if !target(ask-license)
ask-license:
@${DO_NADA}
.endif
.if !target(install-license)
install-license:
@${DO_NADA}
.endif
.endif
# End of post-makefile section.
.endif
# End of the DESTDIR if statement
