DigiTemp is a simple to use console application for reading values from

Dallas Semiconductor 1-wire devices. Its main use is for reading temperature
sensors, but it also reads counters and understands the 1-wire hubs with
devices on different branches of the network. DigiTemp now supports the
following 1-wire temperature sensors: DS18S20 (and DS1820), DS18B20, DS1822,
the DS2438 Smart Battery Monitor, DS2422 and DS2423 Counters, DS2409
MicroLAN Coupler (used in 1-wire hubs) and the AAG TAI-8540 humidity sensor.

WWW: http://www.digitemp.com/software.shtml

PR:		ports/158290
Submitted by:	Evaldas Auryla <ea at zaib.as>

7 files changed, 96 insertions, 0 deletions

diff --git a/misc/Makefile b/misc/Makefile
index cb6432b04a4c..088d11c1da7d 100644
--- a/misc/Makefile
+++ b/misc/Makefile
@@ -68,6 +68,7 @@
     SUBDIR += detachtty
     SUBDIR += diary-hercules
     SUBDIR += diction
+    SUBDIR += digitemp
     SUBDIR += display
     SUBDIR += dnetc
     SUBDIR += dotfile
diff --git a/misc/digitemp/Makefile b/misc/digitemp/Makefile
new file mode 100644
index 000000000000..b5f04368bc43
--- /dev/null
+++ b/misc/digitemp/Makefile
@@ -0,0 +1,55 @@
+# New ports collection makefile for:	digitemp
+# Date created:        25 June 2011
+# Whom:                Evaldas Auryla <ea@zaib.as>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	digitemp
+PORTVERSION=	3.6.0
+CATEGORIES=	misc
+MASTER_SITES=	http://www.digitemp.com/software/linux/
+
+MAINTAINER=	ea@zaib.as
+COMMENT=	Dallas Semiconductor 1-wire device reading console application
+
+LICENSE=	GPLv2
+LICENSE_FILE=	${WRKSRC}/COPYRIGHT
+
+USE_GMAKE=	yes
+
+MAN1=		digitemp.1
+PLIST_FILES=	bin/digitemp_DS9097 bin/digitemp_DS9097U \
+		etc/digitemp.conf.sample
+
+PORTDOCS=	ChangeLog COPYING COPYRIGHT CREDITS FAQ README TODO \
+		dthowto.txt DS9097_Schematic.gif perl python rrdb
+
+ALL_TARGET=	ds9097 ds9097u
+
+pre-install:
+	${CP} ${WRKSRC}/${MAN1} ${WRKSRC}/digitemp.1.M
+	${CAT} ${WRKSRC}/digitemp.1.M | ${SED} -e "s/dev\/ttyS/dev\/cuau/g" > ${WRKSRC}/${MAN1}
+
+do-install:
+	${INSTALL_PROGRAM} ${WRKSRC}/digitemp_DS9097 ${PREFIX}/bin
+	${INSTALL_PROGRAM} ${WRKSRC}/digitemp_DS9097U ${PREFIX}/bin
+	${INSTALL_MAN} ${WRKSRC}/${MAN1} ${PREFIX}/man/man1
+
+post-install:
+.if !defined(NOPORTDOCS)
+	${INSTALL} -d ${DOCSDIR}
+	@${INSTALL_DATA} ${WRKSRC}/ChangeLog ${WRKSRC}/COPYING ${WRKSRC}/COPYRIGHT ${WRKSRC}/CREDITS ${WRKSRC}/FAQ \
+		${WRKSRC}/README ${WRKSRC}/TODO ${WRKSRC}/dthowto.txt ${WRKSRC}/DS9097_Schematic.gif ${DOCSDIR}
+.for dir in perl python/gui python/mysql rrdb
+	${INSTALL} -d ${DOCSDIR}/${dir}
+	${FIND} ${WRKSRC}/${dir}/ -maxdepth 1 -type f -exec ${INSTALL_DATA} \{\} ${DOCSDIR}/${dir} \;
+.endfor
+.endif
+	${CAT} ${PKGMESSAGE}
+	${INSTALL_DATA} ${FILESDIR}/digitemp.conf.sample ${PREFIX}/etc/
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} "Sample config installed at ${PREFIX}/etc/digitemp.conf.sample"
+	@${ECHO_MSG} ""
+
+.include <bsd.port.mk>
diff --git a/misc/digitemp/distinfo b/misc/digitemp/distinfo
new file mode 100644
index 000000000000..8c4cb9b66e69
--- /dev/null
+++ b/misc/digitemp/distinfo
@@ -0,0 +1,2 @@
+SHA256 (digitemp-3.6.0.tar.gz) = 14cfc584cd3714fe8c9a2cdc8388be49e08b5e395d95e6bcd11d4410e2505ca2
+SIZE (digitemp-3.6.0.tar.gz) = 290107
diff --git a/misc/digitemp/files/digitemp.conf.sample b/misc/digitemp/files/digitemp.conf.sample
new file mode 100644
index 000000000000..fd2ee2e5a67e
--- /dev/null
+++ b/misc/digitemp/files/digitemp.conf.sample
@@ -0,0 +1,10 @@
+TTY /dev/cuau0
+READ_TIME 1000
+LOG_TYPE 1
+LOG_FORMAT "%b %d %H:%M:%S Sensor %s C: %.2C F: %.2F"
+CNT_FORMAT "%b %d %H:%M:%S Sensor %s #%n %C"
+HUM_FORMAT "%b %d %H:%M:%S Sensor %s C: %.2C F: %.2F H: %h%%"
+SENSORS 3
+ROM 0 0x10 0x68 0x46 0x4A 0x01 0x08 0x00 0xCA
+ROM 1 0x10 0x02 0xFF 0x4D 0x01 0x08 0x00 0xFC
+ROM 2 0x10 0x78 0x94 0x72 0x01 0x08 0x00 0x18
diff --git a/misc/digitemp/files/patch-digitemp.h b/misc/digitemp/files/patch-digitemp.h
new file mode 100644
index 000000000000..b0e1c571945a
--- /dev/null
+++ b/misc/digitemp/files/patch-digitemp.h
@@ -0,0 +1,11 @@
+--- src/digitemp.h.orig	2008-08-28 06:34:17.000000000 +0200
++++ src/digitemp.h	2011-06-25 12:52:19.000000000 +0200
+@@ -18,7 +18,7 @@
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    59 Temple Place - Suite 330, Boston, MA  02111-1307, USA
+    ----------------------------------------------------------------------- */
+-#define BANNER_1     "DigiTemp v3.5.0 Copyright 1996-2007 by Brian C. Lane\n"
++#define BANNER_1     "DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane\n"
+ #define BANNER_2     "GNU Public License v2.0 - http://www.digitemp.com\n"
+ #define BANNER_3     "Compiled for %s\n\n"
+ 
diff --git a/misc/digitemp/pkg-descr b/misc/digitemp/pkg-descr
new file mode 100644
index 000000000000..b0757e57da6b
--- /dev/null
+++ b/misc/digitemp/pkg-descr
@@ -0,0 +1,9 @@
+DigiTemp is a simple to use console application for reading values from
+Dallas Semiconductor 1-wire devices. Its main use is for reading temperature
+sensors, but it also reads counters and understands the 1-wire hubs with
+devices on different branches of the network. DigiTemp now supports the
+following 1-wire temperature sensors: DS18S20 (and DS1820), DS18B20, DS1822,
+the DS2438 Smart Battery Monitor, DS2422 and DS2423 Counters, DS2409
+MicroLAN Coupler (used in 1-wire hubs) and the AAG TAI-8540 humidity sensor.
+
+WWW: http://www.digitemp.com/software.shtml
diff --git a/misc/digitemp/pkg-message b/misc/digitemp/pkg-message
new file mode 100644
index 000000000000..e8ae2d1ad09e
--- /dev/null
+++ b/misc/digitemp/pkg-message
@@ -0,0 +1,8 @@
+*******************************************************************
+
+  NOTE: on FreeBSD Digitemp should use /dev/cuau* serial devices,
+  so if running as non-root user, please tune your devfs rules or
+  add running user to "dialer" group which is the default owner
+  of /dev/cuau* devices !
+
+*******************************************************************