Add an X.Org driver, a kernel module, and a script to configure X.Org

for Wacom tablets.

The X.Org driver is a port of the Linux Wacom Project's [1] work.

The kernel module required for USB tablets is provided by Bartosz
Fabianowski [2], and supports the following devices:

Graphire*, Graphire2*, Graphire3, Graphire4
Bamboo, Bamboo One*, Bamboo Fun
Intuos3, Cintiq 21UX
Volito*, Volito2*
PenStation2*, PenPartner2*

* not tested

PR:		ports/128547
Submitted by:	Dominic Fandrey [3]
Reviewed by:	gabor
Approved by:	gabor

[1] http://linuxwacom.sourceforge.net
[2] <freebsd (at) chillt (dot) de>
[3] <kamikaze (at) bsdforen (dot) de>

7 files changed, 523 insertions, 0 deletions

diff --git a/x11-drivers/Makefile b/x11-drivers/Makefile
index 8a0ea07cf629..505037cbda2f 100644
--- a/x11-drivers/Makefile
+++ b/x11-drivers/Makefile
@@ -3,6 +3,7 @@
 
     COMMENT = X11 drivers
 
+    SUBDIR += input-wacom
     SUBDIR += synaptics
     SUBDIR += xf86-input-acecad
     SUBDIR += xf86-input-calcomp
diff --git a/x11-drivers/input-wacom/Makefile b/x11-drivers/input-wacom/Makefile
new file mode 100644
index 000000000000..cd1aaa15b354
--- /dev/null
+++ b/x11-drivers/input-wacom/Makefile
@@ -0,0 +1,106 @@
+# New ports collection makefile for:	input-wacom
+# Date Created:				24 Oct 2008
+# Whom:					Dominic Fandrey <kamikaze@bsdforen.de>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	input-wacom
+PORTVERSION=	${WACOM_VERSION:C/-/./g}.${KLD_VERSION}
+CATEGORIES=	x11-drivers kld
+MASTER_SITES=	http://www.chillt.de/bsdwacom/ \
+		${MASTER_SITE_SOURCEFORGE}
+MASTER_SITE_SUBDIR=	linuxwacom
+DISTFILES=	${BSDWACOM}.tbz \
+		${LINUXWACOM}.tar.bz2
+EXTRACT_ONLY=	${BSDWACOM}.tbz
+
+MAINTAINER=	kamikaze@bsdforen.de
+COMMENT=	X.Org Wacom tablet driver and kernel module
+
+MAN4=		wacom.4x
+MANCOMPRESSED=	yes
+
+USE_GMAKE=	yes
+USE_RC_SUBR=	wacom
+
+KMODDIR?=	/boot/modules
+XINPUTMODDIR=	lib/xorg/modules/input
+MAN4DIR=	man/man4
+WRKSRC=		${WRKDIR}
+
+PLIST_SUB+=	KMODDIR=${KMODDIR} \
+		XINPUTMODDIR=${XINPUTMODDIR}
+SUB_LIST:=	${PLIST_SUB}
+SUB_FILES+=	pkg-message
+PKGMESSAGE=	${WRKDIR}/pkg-message
+
+XORG_CAT=	driver
+USE_XORG=	xi
+
+LINUXWACOM=	linuxwacom-${WACOM_VERSION}
+BSDWACOM=	bsdwacom-${KLD_VERSION}
+WACOM_VERSION=	0.8.1-3
+KLD_VERSION=	38
+
+OPTIONS=	UWACOMKLD "Install USB kernel module" On
+
+.include <bsd.port.pre.mk>
+
+.if defined(WITH_UWACOMKLD)
+PLIST_SUB+=	UWACOMKLD="uwacom.ko"
+.else
+PLIST_SUB+=	UWACOMKLD="@noinst UWACOMKLD uwacom.ko"
+.endif
+
+do-configure:
+	@cd ${WRKDIR}/linuxwacom \
+		&& ${LN} -s ${DISTDIR}/${DIST_SUBDIR}/${LINUXWACOM}.tar.bz2 \
+		&& ./run_configure
+
+do-build:
+.if defined(WITH_UWACOMKLD)
+	@cd ${WRKDIR}/uwacom \
+		&& ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_ARGS}
+.endif
+	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM} \
+		&& ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_ARGS}
+
+do-install:
+.if defined(WITH_UWACOMKLD)
+	@${MKDIR} ${KMODDIR}
+	@${INSTALL_KLD} ${WRKDIR}/uwacom/uwacom.ko ${KMODDIR}/
+.endif
+	@${MKDIR} ${PREFIX}/${XINPUTMODDIR} ${PREFIX}/${MAN4DIR}
+	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util/ \
+		&& ${GMAKE} install
+	@${INSTALL} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/xdrv/wacom_drv.so \
+		${PREFIX}/${XINPUTMODDIR}/
+	@${INSTALL_MAN} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/wacom.4x.gz \
+		${PREFIX}/${MAN4DIR}/
+
+plist: clean configure
+	@${ECHO} "===>  Rebuilding PLIST."
+	@${TOUCH} ${PLIST}
+	@${RM} ${PLIST}
+	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM} \
+		&& ./configure --prefix=${WRKDIR}/plist
+	@${MKDIR} ${WRKDIR}/plist
+	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util && ${GMAKE} install
+	@cd ${WRKDIR}/linuxwacom \
+		&& ./run_configure
+	@${FIND} ${WRKDIR}/plist/ -not -type d \
+		| ${SED} "s|${WRKDIR}/plist/||1" \
+		>> ${PLIST}
+	@${FIND} -d ${WRKDIR}/plist/ -mindepth 2 -type d \
+		| ${SED} "s|${WRKDIR}/plist/|@dirrm |1" \
+		>> ${PLIST}
+	@${ECHO} "%%XINPUTMODDIR%%/wacom_drv.so" >> ${PLIST}
+	@${ECHO} "@cwd %%KMODDIR%%" >> ${PLIST}
+	@${ECHO} "%%UWACOMKLD%%" >> ${PLIST}
+
+post-install:
+	@${ECHO} "===>  Displaying pkg-message."
+	@${CAT} ${PKGMESSAGE}
+
+.include <bsd.port.post.mk>
diff --git a/x11-drivers/input-wacom/distinfo b/x11-drivers/input-wacom/distinfo
new file mode 100644
index 000000000000..895e30b1301e
--- /dev/null
+++ b/x11-drivers/input-wacom/distinfo
@@ -0,0 +1,6 @@
+MD5 (xorg/driver/bsdwacom-38.tbz) = fae10723e12b5bfc5daea411639f0ed4
+SHA256 (xorg/driver/bsdwacom-38.tbz) = 0d9027b5d781cd520ebe41287b388973465e8d62109c5d3f52d68f12ede03507
+SIZE (xorg/driver/bsdwacom-38.tbz) = 19993
+MD5 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = d09b212946e321cc503adf84e243ca99
+SHA256 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = cf1ac159d87666d16e2e3bfad81ede93e088b3bf64bb6d2d469adceb2a4c9dee
+SIZE (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = 1209228
diff --git a/x11-drivers/input-wacom/files/pkg-message.in b/x11-drivers/input-wacom/files/pkg-message.in
new file mode 100644
index 000000000000..fdf3c418c99c
--- /dev/null
+++ b/x11-drivers/input-wacom/files/pkg-message.in
@@ -0,0 +1,16 @@
+To setup the wacom driver for X and start the kernel module upon boot
+run the following commands as the root user:
+
+# echo 'wacom_enable="YES"' >> /etc/rc.conf
+# %%PREFIX%%/etc/rc.d/wacom setup
+
+You can unload the driver and clean up the Xorg configuration by
+running the following lines before deinstalling:
+# %%PREFIX%%/etc/rc.d/wacom cleanup
+# %%PREFIX%%/etc/rc.d/wacom stop
+
+To activate the driver without rebooting run:
+
+# %%PREFIX%%/etc/rc.d/wacom start
+
+Now (re)plug in your tablet and restart X.
diff --git a/x11-drivers/input-wacom/files/wacom.in b/x11-drivers/input-wacom/files/wacom.in
new file mode 100644
index 000000000000..79c8c4357add
--- /dev/null
+++ b/x11-drivers/input-wacom/files/wacom.in
@@ -0,0 +1,365 @@
+#!/bin/sh 
+
+# PROVIDE: wacom
+# REQUIRE: FILESYSTEMS
+#
+# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+# wacom_enable (bool):   Set to NO by default.
+#               Set it to YES to enable wacom.
+#
+# This script additionally offers setup and cleanup to configure Xorg
+# for use of the driver or remove the configuration settings.
+# The input devices are only added to the first ServerLayout section
+# and also only removed once.
+#
+
+. %%RC_SUBR%%
+
+name="wacom"
+rcvar=${name}_enable
+
+extra_commands="setup cleanup"
+setup_cmd=do_setup
+start_cmd=do_start
+stop_cmd=do_stop
+cleanup_cmd=do_cleanup
+
+#
+# Outputs the location of the Xorg configuration file.
+# Returns 1 if no file could be found.
+#
+get_xorg_conf() {
+	local config_locations config
+
+	# Possible Xorg configuration file locations, taken from the
+	# xorg.conf(5) manual page.
+	config_locations="
+/etc/X11/$XORGCONFIG
+%%PREFIX%%/etc/X11/$XORGCONFIG
+/etc/X11/xorg.conf-4
+/etc/X11/xorg.conf
+/etc/xorg.conf
+%%PREFIX%%/etc/X11/xorg.conf.$HOST
+%%PREFIX%%/etc/X11/xorg.conf-4
+%%PREFIX%%/etc/X11/xorg.conf
+%%PREFIX%%/lib/X11/xorg.conf.$HOST
+%%PREFIX%%/lib/X11/xorg.conf-4
+%%PREFIX%%/lib/X11/xorg.conf
+NONE
+"
+
+	# Find the first matching config file.
+	for config in $config_locations; {
+		test -f "$config" && break
+	}
+
+	if [ "$config" = "NONE" ]; then
+		echo "No Xorg configuration has been found." 1>&2
+		return 1
+	fi
+
+	echo "$config"
+	return 0
+}
+
+#
+# Returns the line number of the first line matching the extended regular
+# expression $2 in the file $1.
+#
+# @param $1
+#	The file to get the line number from.
+# @param $2
+#	An extend regular expression.
+# @stdout
+#	The line number of the first line matching $2.
+#
+get_first() {
+	local result IFS
+	IFS='
+'
+	result="$(/usr/bin/grep -Ein "$2" "$1")"
+	result="${result%%:*}"
+
+	# No match.
+	if [ -z "$result" ]; then
+		return 1
+	fi
+
+	echo "$result"
+	return 0
+}
+
+#
+# Returns the line number of the line before line number $2 that matches the
+# extended regular expression $3 in the file $1.
+#
+# @param $1
+#	The file to get the line number from.
+# @param $2
+#	The line before which the expression should match.
+# @param $3
+#	An extend regular expression.
+# @stdout
+#	The line number of the first line before line $2 matching $3.
+#
+get_before() {
+	local result IFS line length
+	IFS='
+'
+
+	# The length is necessary to make sure the check is run once
+	# again for the last match.
+	length="$(/usr/bin/wc -l "$1")"
+	length=${length% *}
+
+	result=-1
+	for line in $(/usr/bin/grep -Ein "$3" "$1") $(($length + 1)); {
+		line="${line%%:*}"
+
+		# We have passed the line to look for.
+		if [ $line -ge $2 ]; then
+
+			# No match before this line.
+			if [ $result -lt 0 ]; then
+				return 1
+			fi
+
+			echo "$result"
+			return 0
+		fi
+
+		result=$line
+	}
+
+	# No result.
+	return 1
+}
+
+#
+# Returns the line number of the line behind line number $2 that matches the
+# extended regular expression $3 in the file $1.
+#
+# @param $1
+#	The file to get the line number from.
+# @param $2
+#	The line behind which the expression should match.
+# @param $3
+#	An extend regular expression.
+# @stdout
+#	The line number of the first line behind line $2 matching $3.
+#
+get_behind() {
+	local IFS line
+	IFS='
+'
+
+	for line in $(/usr/bin/grep -Ein "$3" "$1"); {
+		line="${line%%:*}"
+
+		# We have passed the line to look for.
+		if [ $line -gt $2 ]; then
+			echo "$line"
+			return 0
+		fi
+	}
+
+	# No result.
+	return 1
+}
+
+#
+# Inserts a line at the end of a section of an Xorg configuration file.
+# Only works on the first matching section.
+#
+section_insert_line() {
+	local file section insert begin end length
+	file="$1"
+	section="$2"
+	insert="$3"
+
+	# Find the beginning of the section.
+	begin="$(get_first "$file" \
+		"^[[:space:]]*Section[[:space:]]+\"$section\"" \
+	)"
+
+	if [ -z "$begin" ]; then
+		echo "Identifying section $section has failed." 1>&2
+		return 1
+	fi
+
+	# Find the end of the section.
+	end="$(get_behind "$file" "$begin" "^[[:space:]]*EndSection")"
+
+	if [ -z "$end" ]; then
+		echo "The section $section is not closed." 1>&2
+		return 2
+	fi
+
+	# Determine the length of the configuration file.
+	length="$(/usr/bin/wc -l "$file")"
+	length=${length% *}
+
+	# Insert the line.
+	/bin/cp "$file" "$file.$$"
+
+	/usr/bin/head -n$(($end - 1)) "$file.$$" > "$file"
+	echo "$insert" >> "$file"
+	/usr/bin/tail -n$(($length - $end + 1)) "$file.$$" >> "$file"
+	
+	/bin/rm "$file.$$"
+}
+
+#
+# Adds the necessary lines to the Xorg configuration.
+#
+do_setup() {
+	local config ident status
+
+	# Get the Xorg configuration file.
+	config="$(get_xorg_conf)"
+	status=$?
+	test $status -ne 0 && return $status
+
+	echo "Setting up configuration in $config."
+
+	# Add all the necessary sections.
+	for ident in stylus eraser cursor pad touch; {
+		if /usr/bin/grep -Eqi "^[[:space:]]*Identifier[[:space:]]+\"$ident\"" "$config"; then
+			echo "Skipping $ident, because it already exists in $config."
+			continue
+		fi
+
+		echo "Inserting $ident."
+
+		echo "Section \"InputDevice\"
+	Driver		\"wacom\"
+	Identifier	\"$ident\"
+	Option		\"Device\"	\"/dev/event0\"
+	Option		\"Type\"	\"$ident\"
+	Option		\"USB\"		\"on\"
+EndSection
+" >> "$config"
+
+		section_insert_line "$config" "ServerLayout" "	InputDevice	\"$ident\"	\"SendCoreEvents\""
+	}
+
+}
+
+#
+# Removes all wacom stuff from the Xorg configuration file. Beware,
+# this also affects handwritten content.
+#
+do_cleanup() {
+	local config status driver i begin last_begin end length ident IFS
+
+	# Get the Xorg configuration file.
+	config="$(get_xorg_conf)"
+	status=$?
+	test $status -ne 0 && return $status
+
+	echo "Removing wacom entries from $config."
+
+	IFS='
+'
+	while true; do
+		# Find a wacom section.
+		driver="$(get_first "$config" \
+			"^[[:space:]]*Driver[[:space:]]+\"wacom\"" \
+		)"
+
+		# Not a numeric, no more wacom sections left.
+		test -z "$driver" && break
+
+		# Find the beginning of the section.
+		begin="$(get_before "$config" "$driver" \
+			"^[[:space:]]*Section[[:space:]]+\"InputDevice\"" \
+		)"
+
+		if [ -z "$begin" ]; then
+			echo "Beginning of wacom driver section" \
+				"could not be found!" 1>&2
+			return 1
+		fi
+
+		# Find the end of the section.
+		end="$(get_behind "$config" "$driver" \
+			"^[[:space:]]*EndSection" \
+		)"
+
+		if [ -z "$end" ]; then
+			echo "The Wacom driver section is" \
+				"not closed properly." 1>&2
+			return 2
+		fi
+
+		# Determine the length of the configuration file.
+		length="$(/usr/bin/wc -l "$config")"
+		length=${length% *}
+
+		# Adjust the end by trailing newlines.
+		while [ $end -lt $length -a \
+			-z "$(/usr/bin/tail -n$(($length - $end)) "$config" \
+			| /usr/bin/head -n1)" ]; do
+			end=$(($end + 1))
+		done
+
+		# Remove the section.
+		/bin/cp "$config" "$config.$$"
+
+		/usr/bin/head -n$(($begin - 1)) "$config.$$" > "$config"
+		/usr/bin/tail -n$(($length - $end)) "$config.$$" >> "$config"
+	
+		/bin/rm "$config.$$"
+	done
+	IFS='	 
+'
+
+	echo "Cleaning up ServerLayout section."
+
+	for ident in stylus eraser cursor pad touch; {
+		driver="$(get_first "$config" \
+			"[[:space:]]*InputDevice[[:space:]]+\"$ident\"" \
+		)"
+
+		# There is no line matching this driver.
+		test -z "$driver" && continue
+
+		# Determine the length of the configuration file.
+		length="$(/usr/bin/wc -l "$config")"
+		length=${length% *}
+
+		# Remove the section.
+		/bin/cp "$config" "$config.$$"
+
+		/usr/bin/head -n$(($driver - 1)) "$config.$$" > "$config"
+		/usr/bin/tail -n$(($length - $driver)) "$config.$$" >> "$config"
+	
+		/bin/rm "$config.$$"
+	}
+}
+
+do_start() {
+	if /sbin/kldstat | /usr/bin/grep -q uwacom; then
+		echo "${name} is already running."
+		return 0
+	fi
+	echo "Starting ${name}."
+	/sbin/kldload %%KMODDIR%%/uwacom.ko
+}
+
+do_stop() {
+	if ! /sbin/kldstat | /usr/bin/grep -q uwacom; then
+		echo "${name} is not running."
+		return 0
+	fi
+	echo "Stopping ${name}."
+	/sbin/kldunload %%KMODDIR%%/uwacom.ko
+}
+
+load_rc_config $name
+
+: ${wacom_enable="NO"}
+
+run_rc_command "$1"
diff --git a/x11-drivers/input-wacom/pkg-descr b/x11-drivers/input-wacom/pkg-descr
new file mode 100644
index 000000000000..9d5c1d0ab7f1
--- /dev/null
+++ b/x11-drivers/input-wacom/pkg-descr
@@ -0,0 +1,17 @@
+This package contains the X.Org linuxwacom driver, a Wacom kernel module
+and a script to configure Xorg.
+
+The kernel module is provided by Bartosz Fabianowski <freebsd@chillt.de> and
+supports the following devices:
+	Graphire*, Graphire2*, Graphire3, Graphire4
+	Bamboo, Bamboo One*, Bamboo Fun
+	Intuos3, Cintiq 21UX
+	Volito*, Volito2*
+	PenStation2*, PenPartner2*
+
+* not tested
+
+WWW: http://linuxwacom.sourceforge.net/
+
+- Kamikaze
+kamikaze@bsdforen.de
diff --git a/x11-drivers/input-wacom/pkg-plist b/x11-drivers/input-wacom/pkg-plist
new file mode 100644
index 000000000000..991caac094e7
--- /dev/null
+++ b/x11-drivers/input-wacom/pkg-plist
@@ -0,0 +1,12 @@
+lib/libwacomcfg.so.0
+lib/libwacomcfg.so
+lib/libwacomcfg.la
+lib/libwacomcfg.a
+bin/wacdump
+bin/xidump
+bin/xsetwacom
+include/wacomcfg/wacomcfg.h
+@dirrm include/wacomcfg
+%%XINPUTMODDIR%%/wacom_drv.so
+@cwd %%KMODDIR%%
+%%UWACOMKLD%%