Update to 1.1.8

Re-enable IPv6 with non official patch

PR:		37798
Submitted by:	maintainer

44 files changed, 264 insertions, 286 deletions

diff --git a/mail/postfix/Makefile b/mail/postfix/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix/Makefile
+++ b/mail/postfix/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix/distinfo b/mail/postfix/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix/distinfo
+++ b/mail/postfix/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix/pkg-install b/mail/postfix/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix/pkg-install
+++ b/mail/postfix/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix/scripts/configure.postfix b/mail/postfix/scripts/configure.postfix
index 8064d0e5dba0..ffe704a5d7da 100644
--- a/mail/postfix/scripts/configure.postfix
+++ b/mail/postfix/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix1/Makefile b/mail/postfix1/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix1/Makefile
+++ b/mail/postfix1/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix1/distinfo b/mail/postfix1/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix1/distinfo
+++ b/mail/postfix1/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix1/pkg-install b/mail/postfix1/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix1/pkg-install
+++ b/mail/postfix1/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix1/scripts/configure.postfix b/mail/postfix1/scripts/configure.postfix
index 838998c66d67..175ec0b0802a 100644
--- a/mail/postfix1/scripts/configure.postfix
+++ b/mail/postfix1/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix1/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix1/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix20/Makefile b/mail/postfix20/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix20/Makefile
+++ b/mail/postfix20/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix20/distinfo b/mail/postfix20/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix20/distinfo
+++ b/mail/postfix20/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix20/pkg-install b/mail/postfix20/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix20/pkg-install
+++ b/mail/postfix20/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix20/scripts/configure.postfix b/mail/postfix20/scripts/configure.postfix
index 4704833ffe44..b473c5f10354 100644
--- a/mail/postfix20/scripts/configure.postfix
+++ b/mail/postfix20/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix20/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix20/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix21/Makefile b/mail/postfix21/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix21/Makefile
+++ b/mail/postfix21/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix21/distinfo b/mail/postfix21/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix21/distinfo
+++ b/mail/postfix21/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix21/pkg-install b/mail/postfix21/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix21/pkg-install
+++ b/mail/postfix21/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix21/scripts/configure.postfix b/mail/postfix21/scripts/configure.postfix
index 00e3765d1e63..9fe9d65f5056 100644
--- a/mail/postfix21/scripts/configure.postfix
+++ b/mail/postfix21/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix21/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix21/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix22/Makefile b/mail/postfix22/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix22/Makefile
+++ b/mail/postfix22/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix22/distinfo b/mail/postfix22/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix22/distinfo
+++ b/mail/postfix22/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix22/pkg-install b/mail/postfix22/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix22/pkg-install
+++ b/mail/postfix22/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix22/scripts/configure.postfix b/mail/postfix22/scripts/configure.postfix
index f9ede7c1e6a7..9def91bc0ba6 100644
--- a/mail/postfix22/scripts/configure.postfix
+++ b/mail/postfix22/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix22/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix22/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix23/Makefile b/mail/postfix23/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix23/Makefile
+++ b/mail/postfix23/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix23/distinfo b/mail/postfix23/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix23/distinfo
+++ b/mail/postfix23/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix23/pkg-install b/mail/postfix23/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix23/pkg-install
+++ b/mail/postfix23/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix23/scripts/configure.postfix b/mail/postfix23/scripts/configure.postfix
index 7f6aaa10d870..aae0c4b9a98a 100644
--- a/mail/postfix23/scripts/configure.postfix
+++ b/mail/postfix23/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix23/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix23/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix24/Makefile b/mail/postfix24/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix24/Makefile
+++ b/mail/postfix24/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix24/distinfo b/mail/postfix24/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix24/distinfo
+++ b/mail/postfix24/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix24/pkg-install b/mail/postfix24/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix24/pkg-install
+++ b/mail/postfix24/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix24/scripts/configure.postfix b/mail/postfix24/scripts/configure.postfix
index d34447eb54bf..a39767975d37 100644
--- a/mail/postfix24/scripts/configure.postfix
+++ b/mail/postfix24/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix24/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix24/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix25/Makefile b/mail/postfix25/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix25/Makefile
+++ b/mail/postfix25/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix25/distinfo b/mail/postfix25/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix25/distinfo
+++ b/mail/postfix25/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix25/pkg-install b/mail/postfix25/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix25/pkg-install
+++ b/mail/postfix25/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix25/scripts/configure.postfix b/mail/postfix25/scripts/configure.postfix
index 94f80e18df89..2df484f00d6b 100644
--- a/mail/postfix25/scripts/configure.postfix
+++ b/mail/postfix25/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix25/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix25/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix26/Makefile b/mail/postfix26/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix26/Makefile
+++ b/mail/postfix26/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix26/distinfo b/mail/postfix26/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix26/distinfo
+++ b/mail/postfix26/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix26/pkg-install b/mail/postfix26/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix26/pkg-install
+++ b/mail/postfix26/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix26/scripts/configure.postfix b/mail/postfix26/scripts/configure.postfix
index ec8b4cb11bee..266dabf1d556 100644
--- a/mail/postfix26/scripts/configure.postfix
+++ b/mail/postfix26/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix26/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix26/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix27/Makefile b/mail/postfix27/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix27/Makefile
+++ b/mail/postfix27/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix27/distinfo b/mail/postfix27/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix27/distinfo
+++ b/mail/postfix27/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix27/pkg-install b/mail/postfix27/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix27/pkg-install
+++ b/mail/postfix27/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix27/scripts/configure.postfix b/mail/postfix27/scripts/configure.postfix
index 8591538a954f..0b4ffd67acea 100644
--- a/mail/postfix27/scripts/configure.postfix
+++ b/mail/postfix27/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix27/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix27/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"
diff --git a/mail/postfix28/Makefile b/mail/postfix28/Makefile
index 793fe9f6c906..cbf06a2ebf93 100644
--- a/mail/postfix28/Makefile
+++ b/mail/postfix28/Makefile
@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	postfix
-PORTVERSION=	1.1.7
+PORTVERSION=	1.1.8
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -112,6 +112,7 @@ post-install:
 # if we run etc/postfix/post-install again during package installation,
 # it will complain about missing files.
 	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
+	@${CAT} ${PKGMESSAGE}
 
 post-clean:
 	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
diff --git a/mail/postfix28/distinfo b/mail/postfix28/distinfo
index 30bce4748ba1..9d93ab04e030 100644
--- a/mail/postfix28/distinfo
+++ b/mail/postfix28/distinfo
@@ -1,2 +1,3 @@
-MD5 (postfix/postfix-1.1.7.tar.gz) = 320ea040f13c084a5e8bea680b422e06
-MD5 (postfix/pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz) = 578ade33d4d5475c55c31041857cc6f1
+MD5 (postfix/postfix-1.1.8.tar.gz) = 3b07a59e8bdb46af8c1d82f085a62d73
+MD5 (postfix/pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz) = a00656e4e7fd1e4827c3e805799d2359
+MD5 (postfix/postfix-1.1.7+ipv6.patch.gz) = 9564e8e1e3ddfb885bb1ffaaf75c670b
diff --git a/mail/postfix28/pkg-install b/mail/postfix28/pkg-install
index 8ecea1626d2b..5acdbac8d974 100644
--- a/mail/postfix28/pkg-install
+++ b/mail/postfix28/pkg-install
@@ -143,19 +143,6 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
             echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "mailq		${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
             echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-	    cat <<'EOM'
-To enable postfix to start at boot time, please set these variables in
-your /etc/rc.conf file:
-
-sendmail_enable="YES"
-sendmail_flags="-bd"
-sendmail_outbound_enable="NO"
-sendmail_submit_enable="NO"
-sendmail_msp_queue_enable="NO"
-
-This will disable Sendmail completely.
-
-EOM
         fi
     else
         if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix28/scripts/configure.postfix b/mail/postfix28/scripts/configure.postfix
index 80c0bc903b04..465f92ffe7e9 100644
--- a/mail/postfix28/scripts/configure.postfix
+++ b/mail/postfix28/scripts/configure.postfix
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix28/scripts/Attic/configure.postfix,v 1.19 2002-04-01 18:01:27 dwcjr Exp $
+# $FreeBSD: /tmp/pcvs/ports/mail/postfix28/scripts/Attic/configure.postfix,v 1.20 2002-05-06 19:59:29 dwcjr Exp $
 
 if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
 	exit
@@ -20,7 +20,7 @@ MySQL		"MySQL map lookups" OFF \
 OpenLDAP	"OpenLDAP map lookups" OFF \
 Test		"SMTP/LMTP test server and generator" OFF \
 TLS		"Secure Sockets Layer and Transport Layer Security" OFF \
-IPv6		"IPv6 support (CURRENTLY BROKEN)" OFF \
+IPv6		"IPv6 support (not KAME official)" OFF \
 2> $tempfile
 
 	retval=$?
@@ -55,12 +55,14 @@ while [ "$1" ]; do
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libpcre.a:\${PORTSDIR}/devel/pcre"
 			echo "POSTFIX_CCARGS+=	-DHAS_PCRE -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libpcre.a"
+			echo "PCRE_SUFFIX=	+pcre"
 			SUB_PCRE=""
 			;;
 		\"SASL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libsasl.a:\${PORTSDIR}/security/cyrus-sasl"
 			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libsasl.a -lpam -lcrypt"
+			echo "SASL_SUFFIX=	+sasl"
 			if [ -f ${PREFIX}/lib/libsasl.a ]; then 
 				if nm ${PREFIX}/lib/libsasl.a | grep -wq "mysql_verify_password"; then
 					echo "POSTFIX_CCARGS+=  -DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
@@ -79,34 +81,35 @@ while [ "$1" ]; do
 			echo "MAN8+=		tlsmgr.8"
 			echo "POSTFIX_CCARGS+=	-DHAS_SSL -I/usr/include/openssl"
 			echo "POSTFIX_AUXLIBS+=	-lssl -lcrypto"
-			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.6-0.9.6c.tar.gz"
-			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.6-0.9.6c/pfixtls.diff"
+			echo "DISTFILES+=	\${DISTNAME}.tar.gz pfixtls-0.8.7-1.1.7-0.9.6c.tar.gz"
+			echo "EXTRA_PATCHES+=	\${WRKDIR}/pfixtls-0.8.7-1.1.7-0.9.6c/pfixtls.diff"
 			echo "PATCH_STRIP=	-p1"
+			echo "TLS_SUFFIX=	+tls"
 			SUB_TLS=""
 			;;
 		\"DB3\")
 			echo "LIB_DEPENDS+=	db3.2:\${PORTSDIR}/databases/db3"
 			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include/db3"
 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -ldb3"
+			echo "DB3_SUFFIX=	+db3"
 			;;
 		\"MySQL\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a:\${PORTSDIR}/databases/mysql323-client"
 			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz"
+			echo "MYSQL_SUFFIX=	+mysql"
 			;;
 		\"OpenLDAP\")
 			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libldap.a:\${PORTSDIR}/net/openldap"
 			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
 			echo "POSTFIX_AUXLIBS+=	\${LOCALBASE}/lib/libldap.a \${PREFIX}/lib/liblber.a"
+			echo "OPENLDAP_SUFFIX=	+openldap"
 			;;
 		\"Test\")
 			echo "BIN1=		smtp-sink smtp-source"
 			SUB_TEST=""
 			;;
 		\"IPv6\")
-			/usr/bin/dialog --msgbox "IPv6 is currently broken until kame updates patches" 5 60 > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
 			if [ `uname -m` != "i386" ]; then
 				/usr/bin/dialog --msgbox "IPv6 patch currently only supported on i386!" 5 60 > /dev/stderr
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
@@ -117,10 +120,10 @@ while [ "$1" ]; do
 				rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
 				exit 1
 			fi
-			echo "PATCH_SITES+=	ftp://ftp.kame.net/pub/kame/misc/"
-			echo "PATCH_SITES+=	\${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/kame/misc/&,}"
-			echo "PATCHFILES+=	postfix-20010225snap-v6-20010228a.diff.gz"
+			echo "PATCH_SITES+=	http://www.cyber-magic.org/~taka/misc/"
+			echo "PATCHFILES+=	postfix-1.1.7+ipv6.patch.gz"
 			echo "PATCH_DIST_STRIP= -p1"
+			echo "IPv6_SUFFIX=	+ipv6"
 			echo ""
 			;;
 		*)
@@ -134,3 +137,9 @@ done
 
 echo "PLIST_SUB+=	SUB_TLS=\"${SUB_TLS}\""
 echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
+
+# for some reason, if we alter the pkg name this way, the first build (where
+# we ask the configure questions) doesn't pick up the extensions, but
+# any subsequent build will.  so "make; make install" will build twice.
+# don't do this for now.
+#echo "PKGNAMESUFFIX=	\${PCRE_SUFFIX}\${SASL_SUFFIX}\${DB3_SUFFIX}\${MYSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${IPv6_SUFFIX}"