Change a default key-binding to "egg" one

Submitted by: mita

30 files changed, 134 insertions, 104 deletions

diff --git a/japanese/kinput2-canna+freewnn+sj3/pkg-descr b/japanese/kinput2-canna+freewnn+sj3/pkg-descr
index 1d41b8d72f83..4651007d9da4 100644
--- a/japanese/kinput2-canna+freewnn+sj3/pkg-descr
+++ b/japanese/kinput2-canna+freewnn+sj3/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna, SJ3 and FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna, SJ3 and FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-canna+freewnn+sj3/pkg-message b/japanese/kinput2-canna+freewnn+sj3/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+freewnn+sj3/pkg-message
+++ b/japanese/kinput2-canna+freewnn+sj3/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-canna+freewnn/pkg-descr b/japanese/kinput2-canna+freewnn/pkg-descr
index 54e8cefe3d88..a5b04b4e2743 100644
--- a/japanese/kinput2-canna+freewnn/pkg-descr
+++ b/japanese/kinput2-canna+freewnn/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna and FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna and FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-canna+freewnn/pkg-message b/japanese/kinput2-canna+freewnn/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+freewnn/pkg-message
+++ b/japanese/kinput2-canna+freewnn/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-canna+sj3+wnn6/pkg-descr b/japanese/kinput2-canna+sj3+wnn6/pkg-descr
index 45dcfd3e5d4d..8bd834355fba 100644
--- a/japanese/kinput2-canna+sj3+wnn6/pkg-descr
+++ b/japanese/kinput2-canna+sj3+wnn6/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna, SJ3 and Wnn6.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna, SJ3 and Wnn6.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-canna+sj3+wnn6/pkg-message b/japanese/kinput2-canna+sj3+wnn6/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+sj3+wnn6/pkg-message
+++ b/japanese/kinput2-canna+sj3+wnn6/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-canna+sj3+wnn7/pkg-descr b/japanese/kinput2-canna+sj3+wnn7/pkg-descr
index 3f7762536ed3..1e594b091714 100644
--- a/japanese/kinput2-canna+sj3+wnn7/pkg-descr
+++ b/japanese/kinput2-canna+sj3+wnn7/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna, SJ3 and Wnn7(temporary).  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna, SJ3 and Wnn7(temporary).
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 Note: 	Current wnn7 support on kinput2 is done by backward-compatibility
 	with wnn6, and you need to add following line to ${WNNENVRC}
diff --git a/japanese/kinput2-canna+sj3+wnn7/pkg-message b/japanese/kinput2-canna+sj3+wnn7/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+sj3+wnn7/pkg-message
+++ b/japanese/kinput2-canna+sj3+wnn7/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-canna+wnn6/pkg-descr b/japanese/kinput2-canna+wnn6/pkg-descr
index a146abeda772..85e48e72e1bc 100644
--- a/japanese/kinput2-canna+wnn6/pkg-descr
+++ b/japanese/kinput2-canna+wnn6/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna and Wnn6.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna and Wnn6.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-canna+wnn6/pkg-message b/japanese/kinput2-canna+wnn6/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+wnn6/pkg-message
+++ b/japanese/kinput2-canna+wnn6/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-canna+wnn7/pkg-descr b/japanese/kinput2-canna+wnn7/pkg-descr
index 7ba92820e636..f28abfbf3fd3 100644
--- a/japanese/kinput2-canna+wnn7/pkg-descr
+++ b/japanese/kinput2-canna+wnn7/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Canna and Wnn7(temporary).  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Canna and Wnn7(temporary).
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 Note: 	Current wnn7 support on kinput2 is done by backward-compatibility
 	with wnn6, and you need to add following line to ${WNNENVRC}
diff --git a/japanese/kinput2-canna+wnn7/pkg-message b/japanese/kinput2-canna+wnn7/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-canna+wnn7/pkg-message
+++ b/japanese/kinput2-canna+wnn7/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-freewnn+sj3/pkg-descr b/japanese/kinput2-freewnn+sj3/pkg-descr
index ca22c0552ccb..4c220b044cb9 100644
--- a/japanese/kinput2-freewnn+sj3/pkg-descr
+++ b/japanese/kinput2-freewnn+sj3/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports SJ3 and FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports SJ3 and FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-freewnn+sj3/pkg-message b/japanese/kinput2-freewnn+sj3/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-freewnn+sj3/pkg-message
+++ b/japanese/kinput2-freewnn+sj3/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-freewnn/Makefile b/japanese/kinput2-freewnn/Makefile
index 4d6e69987024..75d795f105c6 100644
--- a/japanese/kinput2-freewnn/Makefile
+++ b/japanese/kinput2-freewnn/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME=	kinput2
 PORTVERSION=	3.1
+PORTREVISION=	1
 PKGNAMESUFFIX=	${INPUT_METHOD}
 CATEGORIES=	japanese x11
 MASTER_SITES=	ftp://ftp.sra.co.jp/pub/x11/kinput2/ 
diff --git a/japanese/kinput2-freewnn/files/patch-kinput2.ad b/japanese/kinput2-freewnn/files/patch-kinput2.ad
new file mode 100644
index 000000000000..ac578576b9fa
--- /dev/null
+++ b/japanese/kinput2-freewnn/files/patch-kinput2.ad
@@ -0,0 +1,14 @@
+--- cmd/Kinput2.ad.orig	Tue May 20 14:13:43 2003
++++ cmd/Kinput2.ad	Tue May 20 14:14:46 2003
+@@ -34,7 +34,10 @@
+ !!
+ !*CcWnn.Jserver:	"primary-jserver-host"
+ !*CcWnn.jserver2nd:	"secondary-jserver-host-if-any"
+-*CcWnn.ccdef:		ccdef.kinput2
++!!! Uncomment below if you like legacy key bindings
++!*CcWnn.ccdef:		ccdef.kinput2
++!!! Anc comment below if you like legacy key bindings
++*CcWnn.ccdef:		ccdef.kinput2.egg
+ !*CcWnn.wnnEnvrc4:	"wnenvrc-file-for-Wnn4"
+ !*CcWnn.wnnEnvrc6:	"wnenvrc-file-for-Wnn6"
+ !!
diff --git a/japanese/kinput2-freewnn/pkg-descr b/japanese/kinput2-freewnn/pkg-descr
index 431e87fb6c34..854c74764bbe 100644
--- a/japanese/kinput2-freewnn/pkg-descr
+++ b/japanese/kinput2-freewnn/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-freewnn/pkg-message b/japanese/kinput2-freewnn/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-freewnn/pkg-message
+++ b/japanese/kinput2-freewnn/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-sj3+wnn6/pkg-descr b/japanese/kinput2-sj3+wnn6/pkg-descr
index 1e9f736e0490..faf88acc108c 100644
--- a/japanese/kinput2-sj3+wnn6/pkg-descr
+++ b/japanese/kinput2-sj3+wnn6/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports SJ3 and Wnn6.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports SJ3 and Wnn6.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-sj3+wnn6/pkg-message b/japanese/kinput2-sj3+wnn6/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-sj3+wnn6/pkg-message
+++ b/japanese/kinput2-sj3+wnn6/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-sj3+wnn7/pkg-descr b/japanese/kinput2-sj3+wnn7/pkg-descr
index 472ed8a3085c..5d8ace8f9f06 100644
--- a/japanese/kinput2-sj3+wnn7/pkg-descr
+++ b/japanese/kinput2-sj3+wnn7/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports SJ3 and Wnn7(temporary).  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports SJ3 and Wnn7(temporary).
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 Note: 	Current wnn7 support on kinput2 is done by backward-compatibility
 	with wnn6, and you need to add following line to ${WNNENVRC}
diff --git a/japanese/kinput2-sj3+wnn7/pkg-message b/japanese/kinput2-sj3+wnn7/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-sj3+wnn7/pkg-message
+++ b/japanese/kinput2-sj3+wnn7/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-wnn6/pkg-descr b/japanese/kinput2-wnn6/pkg-descr
index d9c1725ef34c..8792ae535f27 100644
--- a/japanese/kinput2-wnn6/pkg-descr
+++ b/japanese/kinput2-wnn6/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports Wnn6.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports Wnn6.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2-wnn6/pkg-message b/japanese/kinput2-wnn6/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-wnn6/pkg-message
+++ b/japanese/kinput2-wnn6/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2-wnn7/pkg-descr b/japanese/kinput2-wnn7/pkg-descr
index f1d157d88efc..9d4883276e17 100644
--- a/japanese/kinput2-wnn7/pkg-descr
+++ b/japanese/kinput2-wnn7/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 Note: 	Current wnn7 support on kinput2 is done by backward-compatibility
 	with wnn6, and you need to add following line to ${WNNENVRC}
diff --git a/japanese/kinput2-wnn7/pkg-message b/japanese/kinput2-wnn7/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2-wnn7/pkg-message
+++ b/japanese/kinput2-wnn7/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"
diff --git a/japanese/kinput2/Makefile b/japanese/kinput2/Makefile
index 4d6e69987024..75d795f105c6 100644
--- a/japanese/kinput2/Makefile
+++ b/japanese/kinput2/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME=	kinput2
 PORTVERSION=	3.1
+PORTREVISION=	1
 PKGNAMESUFFIX=	${INPUT_METHOD}
 CATEGORIES=	japanese x11
 MASTER_SITES=	ftp://ftp.sra.co.jp/pub/x11/kinput2/ 
diff --git a/japanese/kinput2/files/patch-kinput2.ad b/japanese/kinput2/files/patch-kinput2.ad
new file mode 100644
index 000000000000..ac578576b9fa
--- /dev/null
+++ b/japanese/kinput2/files/patch-kinput2.ad
@@ -0,0 +1,14 @@
+--- cmd/Kinput2.ad.orig	Tue May 20 14:13:43 2003
++++ cmd/Kinput2.ad	Tue May 20 14:14:46 2003
+@@ -34,7 +34,10 @@
+ !!
+ !*CcWnn.Jserver:	"primary-jserver-host"
+ !*CcWnn.jserver2nd:	"secondary-jserver-host-if-any"
+-*CcWnn.ccdef:		ccdef.kinput2
++!!! Uncomment below if you like legacy key bindings
++!*CcWnn.ccdef:		ccdef.kinput2
++!!! Anc comment below if you like legacy key bindings
++*CcWnn.ccdef:		ccdef.kinput2.egg
+ !*CcWnn.wnnEnvrc4:	"wnenvrc-file-for-Wnn4"
+ !*CcWnn.wnnEnvrc6:	"wnenvrc-file-for-Wnn6"
+ !!
diff --git a/japanese/kinput2/pkg-descr b/japanese/kinput2/pkg-descr
index 431e87fb6c34..854c74764bbe 100644
--- a/japanese/kinput2/pkg-descr
+++ b/japanese/kinput2/pkg-descr
@@ -5,10 +5,12 @@ sends a request to kinput2.  Kinput2 receives the request, does
 kana-kanji conversion, and sends the converted text back to the
 client.
 
-The port supports FreeWnn.  Those looking for egg-key-binding
-other than default binding, try as follows:
+The port supports FreeWnn.
 
-	% kinput2 -ccdef ccdef.kinput2.egg
+(NOTICE)
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 
 -- S. Taoka
 <taoka@FreeBSD.org>
diff --git a/japanese/kinput2/pkg-message b/japanese/kinput2/pkg-message
index 97668d99055e..9c2af0932879 100644
--- a/japanese/kinput2/pkg-message
+++ b/japanese/kinput2/pkg-message
@@ -1,7 +1,5 @@
 ############################################################
-If you want to use Egg key binding on kinput2, then
-you should run
-
-kinput2 -ccdef ccdef.kinput2.egg
-
+Default key-binding is changed to "egg" key-binding by defining
+*CcWnn.ccdef:           ccdef.kinput2.egg
+in ${X11BASE}/lib/X11/app-defaults/Kinput2.
 ############################################################"