- Switch to rc_subr startup script

PR:		ports/84711
Submitted by:	SimpleRezo <freebsd@simplerezo.com>

4 files changed, 80 insertions, 62 deletions

diff --git a/net-mgmt/arpwatch/Makefile b/net-mgmt/arpwatch/Makefile
index dcfa82b59a95..a5d2244d3382 100644
--- a/net-mgmt/arpwatch/Makefile
+++ b/net-mgmt/arpwatch/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME=	arpwatch
 PORTVERSION=	2.1.a13
+PORTREVISION=	1
 CATEGORIES=	net-mgmt
 MASTER_SITES=	ftp://ftp.ee.lbl.gov/
 DISTNAME=	arpwatch-2.1a13
@@ -17,11 +18,12 @@ COMMENT=	Monitor arp & rarp requests
 CONFLICTS=	arpwatch-devel-2.*
 
 GNU_CONFIGURE=	yes
-HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	--quiet
 INSTALL_TARGET=	install install-man
 MAN8=		arpwatch.8 arpsnmp.8
 
+USE_RC_SUBR=	arpwatch.sh
+
 post-install:
 	if [ ! -d ${PREFIX}/arpwatch ]; then				\
 		${MKDIR} ${PREFIX}/arpwatch;				\
@@ -34,9 +36,5 @@ post-install:
 		${INSTALL_DATA} ${WRKSRC}/$$file ${PREFIX}/arpwatch;	\
 	done
 	${INSTALL_SCRIPT} ${WRKSRC}/arp2ethers ${PREFIX}/arpwatch
-	${INSTALL_SCRIPT} ${FILESDIR}/arpwatch.sh ${PREFIX}/etc/rc.d/arpwatch.sh.sample
-	@${ECHO_MSG} "#####################################################################"
-	@${ECHO_MSG} "Installing ${PREFIX}/etc/rc.d/arpwatch.sh.sample file."
-	@${ECHO_MSG} "#####################################################################"
 
 .include <bsd.port.mk>
diff --git a/net-mgmt/arpwatch/files/arpwatch.sh b/net-mgmt/arpwatch/files/arpwatch.sh
deleted file mode 100644
index e7c5c3305bd4..000000000000
--- a/net-mgmt/arpwatch/files/arpwatch.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-
-if [ -r /etc/defaults/rc.conf ]; then
-	. /etc/defaults/rc.conf
-	source_rc_confs
-elif [ -r /etc/rc.conf ]; then
-	. /etc/rc.conf
-fi
-
-prog=$(realpath $0) || exit 1
-dir=${prog%/*}
-PREFIX=${dir%/etc/rc.d}
-
-if [ ."$dir" = ."$prog" -o ."$PREFIX" = ."$dir" ]
-then
-	echo "$0: Cannot determine the PREFIX" >&2
-	exit 1
-fi
-
-case $1 in
-start)
-	if [ ! -e "$PREFIX"/arpwatch/arp.dat ]; then
-		if [ -e "$PREFIX"/arpwatch/arp.dat- ]; then
-			cp "$PREFIX"/arpwatch/arp.dat- "$PREFIX"/arpwatch/arp.dat	
-		else
-			touch "$PREFIX"/arpwatch/arp.dat
-		fi
-	fi
-
-	case ${arpwatch_interfaces} in
-	'')
-		if [ -x "$PREFIX"/sbin/arpwatch -a -d "$PREFIX"/arpwatch ]; then
-			"$PREFIX"/sbin/arpwatch && echo -n ' arpwatch'
-		else
-			echo "Error: Cannot find $PREFIX/sbin/arpwatch" >&2
-			exit 1
-		fi
-		;;
-	*)
-		for interface in ${arpwatch_interfaces}; do
-			touch "$PREFIX"/arpwatch/arp.${interface}.dat
-			"$PREFIX"/sbin/arpwatch -i "${interface}" -f arp.${interface}.dat && echo -n " arpwatch(${interface})"
-		done
-		;;
-	esac
-	;;
-stop)
-	killall arpwatch && echo -n ' arpwatch'
-	;;
-*)
-	echo "Usage: `basename $0` {start|stop}" >&2
-	exit 64
-	;;
-esac
-
-exit 0
diff --git a/net-mgmt/arpwatch/files/arpwatch.sh.in b/net-mgmt/arpwatch/files/arpwatch.sh.in
new file mode 100644
index 000000000000..12521d8ef0f8
--- /dev/null
+++ b/net-mgmt/arpwatch/files/arpwatch.sh.in
@@ -0,0 +1,77 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: arpwatch
+# REQUIRE: NETWORKING
+# KEYWORD: FreeBSD
+
+# Add the following lines to /etc/rc.conf to enable arpwatch:
+#
+#arpwatch_enable="YES"
+#
+arpwatch_enable=${arpwatch_enable:-"NO"}
+arpwatch_dir="%%PREFIX%%/arpwatch/"
+arpwatch_interfaces=
+
+. %%RC_SUBR%%
+
+name=arpwatch
+rcvar=`set_rcvar`
+required_dirs=${arpwatch_dir}
+
+load_rc_config ${name}
+
+command="%%PREFIX%%/sbin/${name}"
+start_precmd=${name}_precmd
+
+arpwatch_precmd() {
+    case ${arpwatch_interfaces} in
+        '')
+	    echo prcmd
+	    if [ ! -e "${arpwatch_dir}/arp.dat" ]; then
+		if [ -e "${arpwatch_dir}/arp.dat-" ]; then
+		    cp "${arpwatch_dir}/arp.dat-" "${arpwatch_dir}/arp.dat"
+		else
+		    touch "${arpwatch_dir}/arp.dat"
+		fi
+	    fi
+	;;
+
+	*)
+	    for interface in ${arpwatch_interfaces}; do
+	        if [ ! -e "${arpwatch_dir}/arp.${interface}.dat" ]; then
+		    if [ -e "${arpwatch_dir}/arp.${interface}.dat-" ]; then
+		        cp "${arpwatch_dir}/arp.${interface}.dat-" "${arpwatch_dir}/arp.${interface}.dat"
+		    else
+		        touch "${arpwatch_dir}/arp.${interface}.dat"
+		    fi
+		fi
+	    done
+	;;
+    esac
+}
+
+arpwatch_stop() {
+    killall arpwatch
+}
+
+case ${arpwatch_interfaces} in
+    '')  
+	 echo 'meuh'
+         run_rc_command "$1"
+    ;;
+
+    *)
+	 if [ "$1" = "start" ]; then
+ 	     for interface in ${arpwatch_interfaces}; do
+		 eval options=\$arpwatch_${interface}_options
+	         command_args="-i ${interface} ${options} -f arp.${interface}.dat" 
+                 run_rc_command "$1"
+	     done
+	 else
+             run_rc_command "$1"
+	 fi
+    ;;
+esac
diff --git a/net-mgmt/arpwatch/pkg-plist b/net-mgmt/arpwatch/pkg-plist
index 107115d3caf9..9bb3e616957b 100644
--- a/net-mgmt/arpwatch/pkg-plist
+++ b/net-mgmt/arpwatch/pkg-plist
@@ -5,7 +5,6 @@ arpwatch/ethercodes.dat
 arpwatch/d.awk
 arpwatch/e.awk
 arpwatch/p.awk
-etc/rc.d/arpwatch.sh.sample
 @unexec test -f %D/arpwatch/arp.dat && test -s %D/arpwatch/arp.dat || rm -f %D/arpwatch/arp.dat
 @exec test -f %D/arpwatch/arp.dat || touch %D/arpwatch/arp.dat
 @dirrm arpwatch