aboutsummaryrefslogtreecommitdiffstats
path: root/Mk/bsd.port.mk
diff options
context:
space:
mode:
authoralane <alane@FreeBSD.org>2002-11-11 06:54:25 +0800
committeralane <alane@FreeBSD.org>2002-11-11 06:54:25 +0800
commitb4806d9d0b001f24ed1b95465a27ae36523da963 (patch)
tree7f0c9b1ca2769a21894598f795b4efcf86a99c12 /Mk/bsd.port.mk
parent1668cb3174372fbd1e1a2e4b7fa9caf12dceb79b (diff)
downloadfreebsd-ports-gnome-b4806d9d0b001f24ed1b95465a27ae36523da963.tar.gz
freebsd-ports-gnome-b4806d9d0b001f24ed1b95465a27ae36523da963.tar.zst
freebsd-ports-gnome-b4806d9d0b001f24ed1b95465a27ae36523da963.zip
Major change:
totally rewrote the autoconf/automake support section, with provisions for autoconf 2.54 and automake 1.7.x when they are ready. Minor change: Added DOCSDIR, EXAMPLESDIR, and DATADIR to PLIST_SUB. PR: 42351 Reviewed by: kris Approved by: kris
Diffstat (limited to 'Mk/bsd.port.mk')
-rw-r--r--Mk/bsd.port.mk251
1 files changed, 191 insertions, 60 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk
index 8f30c56529a3..78eae1e02ec6 100644
--- a/Mk/bsd.port.mk
+++ b/Mk/bsd.port.mk
@@ -145,54 +145,50 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org
# the system or installed from a port.
# USE_GMAKE - Says that the port uses gmake.
# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
-# USE_AUTOMAKE - Says that the port uses automake. Implies
-# USE_AUTOCONF and USE_AUTOMAKE_VER?=14.
+# USE_AUTOMAKE - Says that the port uses automake. Implies
+# USE_AUTOCONF and USE_AUTOMAKE_VER?=14.
# USE_AUTOMAKE_VER - Says that the port uses automake. Possible
-# values: 14, 15;
-# each specify a version of automake to use
-# and appropriatly set both AUTOMAKE{,_DIR}
-# and ACLOCAL{,_DIR} variables.
-# Implies USE_AUTOMAKE. If set with
-# unknown value, defaults to 14.
-# AUTOMAKE - Set to path of GNU automake if not in $PATH (default:
-# according to USE_AUTOMAKE_VER value)
+# values: 14, 15, 17, current, devel;
+# each specify a version of automake to use
+# and appropriatly set both AUTOMAKE{,_DIR}
+# and ACLOCAL{,_DIR} variables.
+# Implies USE_AUTOMAKE. If set with
+# unknown value, defaults to "14".
+# AUTOMAKE - Set to path of GNU automake (default:
+# according to USE_AUTOMAKE_VER value)
# AUTOMAKE_ARGS - Pass these args to ${AUTOMAKE} if ${USE_AUTOMAKE_VER} is set.
# AUTOMAKE_ENV - Pass these env (shell-like) to ${AUTOMAKE} if
-# ${USE_AUTOMAKE_VER} is set.
-# ACLOCAL - Set to path of GNU automake aclocal if not in $PATH (default:
-# according to USE_AUTOMAKE_VER value)
-# ACLOCAL_DIR - Set to path of GNU automake aclocal shared directory (default:
-# according to USE_AUTOMAKE_VER value)
+# ${USE_AUTOMAKE_VER} is set.
+# ACLOCAL - Set to path of GNU automake aclocal (default:
+# according to USE_AUTOMAKE_VER value)
+# ACLOCAL_DIR - Set to path of GNU automake aclocal shared directory
+# (default: according to USE_AUTOMAKE_VER value)
# AUTOMAKE_DIR - Set to path of GNU automake shared directory (default:
-# according to USE_AUTOMAKE_VER value)
+# according to USE_AUTOMAKE_VER value)
# USE_AUTOCONF_VER - Says that the port uses autoconf. Possible
-# values: 213;
-# each specify a version of autoconf to use
-# and appropriatly set both AUTOCONF{,_DIR}
-# and ACLOCAL{,_DIR} variables.
-# Implies USE_AUTOCONF. If set with
-# unknown value, defaults to 213.
+# values: 213, 253, 254, current, devel;
+# each specify a version of autoconf to use
+# and appropriatly set both AUTOCONF{,_DIR}
+# and ACLOCAL{,_DIR} variables.
+# Implies USE_AUTOCONF. If set with
+# unknown value, defaults to 213.
# USE_AUTOCONF - Says that the port uses autoconf. Implies
-# GNU_CONFIGURE and USE_AUTOCONF_VER?=213.
-# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default:
-# according to USE_AUTOCONF_VER value)
+# GNU_CONFIGURE and USE_AUTOCONF_VER?=213.
+# AUTOCONF - Set to name of GNU autoconf (default:
+# according to USE_AUTOCONF_VER value)
# AUTOCONF_ARGS - Pass these args to ${AUTOCONF} if ${USE_AUTOCONF} is set.
# AUTOCONF_ENV - Pass these env (shell-like) to ${AUTOCONF} if
-# ${USE_AUTOCONF} is set.
-# AUTOHEADER - Set to path of GNU autoconf autoheader
-# if not in $PATH (default: according
-# to USE_AUTOCONF_VER value)
-# AUTORECONF - Set to path of GNU autoconf autoreconf
-# if not in $PATH (default: according
-# to USE_AUTOCONF_VER value)
-# AUTOSCAN - Set to path of GNU autoconf autoscan
-# if not in $PATH (default: according
-# to USE_AUTOCONF_VER value)
-# AUTOIFNAMES - Set to path of GNU autoconf autoifnames
-# if not in $PATH (default: according
-# to USE_AUTOCONF_VER value)
-# AUTOCONF_DIR - Set to path of GNU autoconf shared directory (default:
-# according to USE_AUTOCONF_VER value)
+# ${USE_AUTOCONF} is set.
+# AUTOHEADER - Set to name of GNU autoconf autoheader
+# (default: according to USE_AUTOCONF_VER value)
+# AUTORECONF - Set to name of GNU autoconf autoreconf
+# (default: according to USE_AUTOCONF_VER value)
+# AUTOSCAN - Set to name of GNU autoconf autoscan
+# (default: according to USE_AUTOCONF_VER value)
+# AUTOIFNAMES - Set to name of GNU autoconf autoifnames
+# (default: according to USE_AUTOCONF_VER value)
+# AUTOCONF_DIR - Set to name of GNU autoconf shared directory (default:
+# according to USE_AUTOCONF_VER value)
# USE_LIBTOOL - Says that the port uses Libtool. Implies GNU_CONFIGURE.
# LIBTOOL - Set to path of libtool (default: libtool).
# LIBTOOLFILES - Files to patch for libtool (defaults: "aclocal.m4" if
@@ -876,36 +872,167 @@ BUILD_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip
BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
CONFIGURE_ENV+= MAKE=${GMAKE}
.endif
+
+######################################################################
+# AUTOMAKE/AUTOCONF SETUP
+# current => non-renamed, non-relocated version
+
+# Set all the vars for the programs to ${FALSE}. This way
+# we can catch a certain class of port Makefile errors quickly.
+
.if defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER)
-USE_AUTOMAKE?= yes
+USE_AUTOMAKE?= yes
USE_AUTOMAKE_VER?= 14
-USE_AUTOCONF= yes
-.endif
-.if defined(USE_AUTOMAKE_VER)
-.if ${USE_AUTOMAKE_VER} == 15
-BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake
-
-ACLOCAL?= aclocal
-AUTOMAKE?= automake
+# 1. Unify to model of:
+# devel, current, or default (14).
+
+.if ${USE_AUTOMAKE_VER} != "devel" && ${USE_AUTOMAKE_VER} != "current"
+.if ${USE_AUTOMAKE_VER} > 15
+USE_AUTOMAKE_VER= devel
+.elif ${USE_AUTOMAKE_VER} > 14
+USE_AUTOMAKE_VER= current
+.else # USE_AUTOMAKE_VER == 14
+USE_AUTOMAKE_VER= 14
+.endif # USE_AUTOMAKE_VER == 14
+.endif # ${USE_AUTOMAKE_VER} != "devel" && ${USE_AUTOMAKE_VER} != "current"
+
+# 2. Set paths according to above model.
+
+.if ${USE_AUTOMAKE_VER:L} == devel
+AMVER= 17
+ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal${AMVER}
+AUTOMAKE_DIR?= ${LOCALBASE}/share/automake${AMVER}
+AUTOMAKE_PATH?= ${LOCALBASE}/libexec/automake${AMVER}
+BUILD_DEPENDS+= automake${AMVER}:${PORTSDIR}/devel/automake${AMVER}
+USE_AUTOCONF_VER= 254
+.elif ${USE_AUTOMAKE_VER:L} == current
+AMVER= 15
ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal
AUTOMAKE_DIR?= ${LOCALBASE}/share/automake
-.else
-BUILD_DEPENDS+= automake14:${PORTSDIR}/devel/automake14
+BUILD_DEPENDS+= automake:${PORTSDIR}/devel/automake
+USE_AUTOCONF_VER= 253
+.else # != current && != devel
+AMVER= 14
+AUTOMAKE_ARGS+= --include-deps
+ACLOCAL_DIR?= ${LOCALBASE}/share/aclocal${AMVER}
+AUTOMAKE_DIR?= ${LOCALBASE}/share/automake${AMVER}
+AUTOMAKE_PATH?= ${LOCALBASE}/libexec/automake${AMVER}
+BUILD_DEPENDS+= automake${AMVER}:${PORTSDIR}/devel/automake${AMVER}
+USE_AUTOCONF_VER= 213
+.endif # != current && != devel
+
+.endif # defined(USE_AUTOMAKE) || defined(USE_AUTOMAKE_VER)
-AUTOMAKE_ARGS+= -i
-USE_AUTOCONF_VER?= 213
-.endif
-.endif
.if defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER)
-USE_AUTOCONF?= yes
+USE_AUTOCONF?= yes
USE_AUTOCONF_VER?= 213
+# 1. Unify to model of:
+# devel, current, or default (213).
+
+.if ${USE_AUTOCONF_VER} != devel && ${USE_AUTOCONF_VER} != current
+.if ${USE_AUTOCONF_VER} > 253
+USE_AUTOCONF_VER= devel
+.elif ${USE_AUTOCONF_VER} == 253
+USE_AUTOCONF_VER= current
+.else # USE_AUTOCONV_VER < 253
+USE_AUTOCONF_VER= 213
+.endif # USE_AUTOCONV_VER < 253
+.endif # ${USE_AUTOCONF_VER} != devel && ${USE_AUTOCONF_VER} != current
+
+# 2. Set paths according to above model.
+
+.if ${USE_AUTOCONF_VER} == devel
+ACVER= 254
+ACJOINPATH= :${AUTOCONF_PATH}
+AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf${ACVER}
+AUTOCONF_PATH?= ${LOCALBASE}/libexec/autoconf${ACVER}
+BUILD_DEPENDS+= autoconf${ACVER}:${PORTSDIR}/devel/autoconf${ACVER}
+.elif ${USE_AUTOCONF_VER} == current
+ACVER= 253
+ACJOINPATH=
+AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf
+BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf
+.else # != current && != devel
+ACVER= 213
+ACJOINPATH= :${AUTOCONF_PATH}
+AUTOCONF_DIR?= ${LOCALBASE}/share/autoconf${ACVER}
+AUTOCONF_PATH?= ${LOCALBASE}/libexec/autoconf${ACVER}
+BUILD_DEPENDS+= autoconf${ACVER}:${PORTSDIR}/devel/autoconf${ACVER}
+.endif # ${USE_AUTOCONF_VER} != "current"
+
+.endif # defined(USE_AUTOCONF) || defined(USE_AUTOCONF_VER)
+
+# automake/autoconf ==> GNU configure is here
+
+.if defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER)
GNU_CONFIGURE= yes
-.endif
-.if defined(USE_AUTOCONF_VER)
-BUILD_DEPENDS+= autoconf213:${PORTSDIR}/devel/autoconf213
-.endif
+.endif # defined(USE_AUTOMAKE_VER) || defined(USE_AUTOCONF_VER)
+
+# set up overall user path to find tools
+
+.if defined(AUTOMAKE_PATH)
+AUTOTOOLS_PATH=${AUTOMAKE_PATH}${ACJOINPATH}
+.elif defined(AUTOCONF_PATH)
+AUTOTOOLS_PATH=${AUTOCONF_PATH}
+.endif # defined(AUTOCONF_PATH)
+
+# prefix path and add to all env settings
+
+.if defined(AUTOTOOLS_PATH)
+MAKE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+CONFIGURE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+SCRIPTS_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+AUTOCONF_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+AUTOMAKE_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+AUTOTOOLS_ENV+= PATH=${AUTOTOOLS_PATH}:${PATH}
+.endif # defined(AUTOTOOLS_PATH)
+
+# set up names/paths to programs
+
+.if defined(AMVER)
+.if !defined(AUTOMAKE_PATH)
+ACLOCAL?= aclocal
+AUTOMAKE?= automake
+.else # defined(AUTOMAKE_PATH)
+ACLOCAL?= ${AUTOMAKE_PATH}/aclocal
+AUTOMAKE?= ${AUTOMAKE_PATH}/automake
+.endif # defined(AUTOMAKE_PATH)
+.endif # defined(AMVER)
+
+.if defined(ACVER)
+.if !defined(AUTOCONF_PATH)
+AUTOCONF?= autoconf
+AUTOHEADER?=autoheader
+AUTOIFNAMES?=ifnames
+AUTORECONF?=autoreconf
+AUTOSCAN?= autoscan
+AUTOUPDATE?=autoupdate
+.else # defined(AUTOCONF_PATH)
+AUTOCONF?= ${AUTOCONF_PATH}/autoconf
+AUTOHEADER?=${AUTOCONF_PATH}/autoheader
+AUTOIFNAMES?=${AUTOCONF_PATH}/ifnames
+AUTORECONF?=${AUTOCONF_PATH}/autoreconf
+AUTOSCAN?= ${AUTOCONF_PATH}/autoscan
+AUTOUPDATE?=${AUTOCONF_PATH}/autoupdate
+.endif # defined(AUTOCONF_PATH)
+.endif # defined(ACVER)
+
+# Set all unset vars for the programs to ${FALSE}. This way
+# we can catch a certain class of port Makefile errors quickly.
+ACLOCAL?= ${FALSE}
+AUTOMAKE?= ${FALSE}
+AUTOCONF?= ${FALSE}
+AUTOHEADER?=${FALSE}
+AUTOIFNAMES?=${FALSE}
+AUTORECONF?=${FALSE}
+AUTOSCAN?= ${FALSE}
+AUTOUPDATE?=${FALSE}
+
+# END AUTOMAKE/AUTOCONF SETUP
+######################################################################
+
.if defined(USE_LIBTOOL)
GNU_CONFIGURE= yes
BUILD_DEPENDS+= libtool:${PORTSDIR}/devel/libtool
@@ -1869,6 +1996,10 @@ DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME}
EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME}
DATADIR?= ${PREFIX}/share/${PORTNAME}
+PLIST_SUB+= DOCSDIR="${DOCSDIR:S,^${PREFIX}/,,}" \
+ EXAMPLESDIR="${EXAMPLESDIR:S,^${PREFIX}/,,}" \
+ DATADIR="${DATADIR:S,^${PREFIX}/,,}"
+
.MAIN: all
################################################################