Add madufufw, Userland scripts to load the M-Audio firmware into supported

sound devices upon attachment.

PR:		148411
Submitted by:	Aragon Gouveia
Feature safe:	yes

6 files changed, 185 insertions, 0 deletions

diff --git a/audio/madfufw/Makefile b/audio/madfufw/Makefile
new file mode 100644
index 000000000000..744c0fc7466d
--- /dev/null
+++ b/audio/madfufw/Makefile
@@ -0,0 +1,50 @@
+# New ports collection makefile for:   madfufw
+# Date created:                July 6, 2010
+# Whom:                        Aragon Gouveia <aragon@phat.za.net>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	madfufw
+PORTVERSION=	1.0
+CATEGORIES=	audio
+MASTER_SITES=	SF/usb-midi-fw/madfu-firmware/1.2/
+DISTNAME=	madfuload-1.2
+
+MAINTAINER=	aragon@phat.za.net
+COMMENT=	M-Audio DFU Firmware for Transit, Ozone, Sonica, MobilePre
+
+RUN_DEPENDS=	${LOCALBASE}/bin/dfu-util:${PORTSDIR}/comms/dfu-util
+
+WRKSRC=		${WRKDIR}/madfuload-1.2
+PLIST_FILES=	share/maudio/ma003101.bin \
+		share/maudio/ma004103.bin \
+		share/maudio/ma005101.bin \
+		share/maudio/ma006100.bin \
+		share/maudio/ma008100.bin \
+		etc/devd/maudio-devd.conf
+PLIST_DIRS=	share/maudio
+USE_RC_SUBR=	maudio
+SUB_FILES=	maudio-devd.conf pkg-message
+NO_BUILD=	yes
+NO_PACKAGE=	redistribution of firmware files not permitted
+
+.include <bsd.port.pre.mk>
+
+.if ${OSVERSION} < 800064
+BROKEN=		port requires FreeBSD 8.x
+.endif
+
+do-install:
+	@${MKDIR} ${LOCALBASE}/share/maudio && \
+	${INSTALL_DATA} ${WRKSRC}/ma003101.bin ${WRKSRC}/ma004103.bin \
+		${WRKSRC}/ma005101.bin ${WRKSRC}/ma006100.bin \
+		${WRKSRC}/ma008100.bin ${LOCALBASE}/share/maudio
+	@${INSTALL_DATA} ${WRKDIR}/maudio-devd.conf ${LOCALBASE}/etc/devd
+
+post-install:
+	@${ECHO_MSG} ""
+	@${CAT} ${PKGMESSAGE}
+	@${ECHO_MSG} ""
+
+.include <bsd.port.post.mk>
diff --git a/audio/madfufw/distinfo b/audio/madfufw/distinfo
new file mode 100644
index 000000000000..e4409f72fa6c
--- /dev/null
+++ b/audio/madfufw/distinfo
@@ -0,0 +1,2 @@
+SHA256 (madfuload-1.2.tar.gz) = 324d0a55f73c82ad48635a94a8d72277a2280030df6d036eafe3498c933dee6d
+SIZE (madfuload-1.2.tar.gz) = 78506
diff --git a/audio/madfufw/files/maudio-devd.conf.in b/audio/madfufw/files/maudio-devd.conf.in
new file mode 100644
index 000000000000..5940432f9a20
--- /dev/null
+++ b/audio/madfufw/files/maudio-devd.conf.in
@@ -0,0 +1,13 @@
+attach 100 {
+	match "device-name" "ugen[0-9]+\.[0-9]+";
+	match "vendor" "0x0763";
+	match "product" "0x280[34568]";
+	action "%%PREFIX%%/etc/rc.d/maudio start $device-name $product";
+};
+
+attach 100 {
+	match "device-name" "uaudio[0-9]+";
+	match "vendor" "0x0763";
+	match "product" "0x2006";
+	action "/usr/local/etc/rc.d/maudio mixer $device-name";
+};
diff --git a/audio/madfufw/files/maudio.in b/audio/madfufw/files/maudio.in
new file mode 100644
index 000000000000..b12a2b51e96c
--- /dev/null
+++ b/audio/madfufw/files/maudio.in
@@ -0,0 +1,98 @@
+#!/bin/sh
+#
+# PROVIDE: maudio
+# REQUIRE: LOGIN
+# KEYWORD: nojail
+#
+# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+# maudio_enable (bool):	Set to NO by default.
+#			Set it to YES to enable maudio.
+# Usage:
+#	maudio start [<device> <product id>]	# load firmware to device with specified product ID
+
+# disable at boot time and prevent simultaneous runs
+if [ -n "${_boot}" -o -f /var/run/maudio.pid ]; then
+	exit 0
+fi
+trap "rm -f /var/run/maudio.pid" 1 2 10 13 14 15 EXIT
+echo $$ >/var/run/maudio.pid
+
+. /etc/rc.subr
+
+name="maudio"
+rcvar=`set_rcvar`
+load_rc_config $name
+
+: ${maudio_enable="NO"}
+
+command="%%PREFIX%%/bin/dfu-util"
+start_cmd="maudio_start"
+firmware_dir="%%PREFIX%%/share/maudio"
+required_modules="uhub/uaudio"
+required_dirs=$firmware_dir
+required_files=$command
+extra_commands="mixer"
+mixer_cmd="maudio_mixer"
+
+maudio_start()
+{
+	local firmware dev idVendor idProduct
+
+	if [ -n "${1}" -a -n "${2}" ]; then
+		idProduct=${2}
+		dev=${1}
+	else
+		for dev in /dev/ugen*; do
+			dev=${dev#/dev/*}
+			eval $( /usr/sbin/usbconfig -d ${dev} dump_device_desc \
+				|grep -E "idVendor = 0x0763|idProduct = 0x280[34568]" |tr -d " " )
+			if [ -n "${idVendor}" -a -n "${idProduct}" ]; then
+				break;
+			fi
+			idVendor=""
+			idProduct=""
+		done
+	fi
+
+	case "${idProduct}" in
+	0x2803)
+		firmware=${firmware_dir}/ma003101.bin
+		;;
+	0x2804)
+		firmware=${firmware_dir}/ma004103.bin
+		;;
+	0x2805)
+		firmware=${firmware_dir}/ma005101.bin
+		;;
+	0x2806)
+		firmware=${firmware_dir}/ma006100.bin
+		;;
+	0x2808)
+		firmware=${firmware_dir}/ma008100.bin
+		;;
+	*)
+		err 1 "Unknown product ID"
+		;;
+	esac
+
+	${command} -R -t 64 -d 0x0763:${idProduct} -D ${firmware} 2>/dev/null 1>&2
+	/usr/sbin/usbconfig -d ${dev} reset
+}
+
+maudio_mixer()
+{
+	local dev
+
+	if [ -z "${1}" ]; then
+		err 1 "No device specified"
+	fi
+
+	dev="/dev/mixer$( echo ${1} |sed -E 's/^[a-z]+([0-9]+)$/\1/' )"
+	if [ -r ${dev} ]; then
+		mixer -f ${dev} vol 100 pcm 100
+	fi
+}
+
+run_rc_command $*
diff --git a/audio/madfufw/files/pkg-message.in b/audio/madfufw/files/pkg-message.in
new file mode 100644
index 000000000000..de5cb8eb823b
--- /dev/null
+++ b/audio/madfufw/files/pkg-message.in
@@ -0,0 +1,11 @@
+A devd(8) configuration has been installed at:
+%%PREFIX%%/etc/devd/maudio-devd.conf.
+
+You must add 'maudio_enable="YES"' to rc.conf
+and restart devd(8) for this port to work.
+
+Some devices (eg. Transit) may also require
+sysctl modifications:
+
+hw.usb.uaudio.default_bits=16
+hw.usb.uaudio.default_rate=48000
diff --git a/audio/madfufw/pkg-descr b/audio/madfufw/pkg-descr
new file mode 100644
index 000000000000..bbffeae97ced
--- /dev/null
+++ b/audio/madfufw/pkg-descr
@@ -0,0 +1,11 @@
+Userland scaffolding to load M-Audio firmware into supported
+sound devices upon attachment.  Supported devices:
+
+* Sonica
+* Ozone
+* MobilePre USB (some newer models don't need this port)
+* Transit 
+
+Based upon the madfuload package.
+
+WWW: http://usb-midi-fw.sourceforge.net/