WSJT is a computer program for amateur radio VHF/UHF communication

using state of the art digital techniques. Typical applications
include communication by meteor scatter and
EME (Earth-Moon-Earth) propagation paths.

WWW: http://pulsar.princeton.edu/~joe/K1JT

- Diane Bruce, VA3DB

PR:		ports/101360
Submitted by:	Diane Bruce <db at db.net>

9 files changed, 1080 insertions, 0 deletions

diff --git a/comms/Makefile b/comms/Makefile
index 039f80a322a1..ac47d1da3e6b 100644
--- a/comms/Makefile
+++ b/comms/Makefile
@@ -119,6 +119,7 @@
     SUBDIR += viewfax
     SUBDIR += vpb-driver
     SUBDIR += vrflash
+    SUBDIR += wsjt
     SUBDIR += wwl
     SUBDIR += wy60
     SUBDIR += xastir
diff --git a/comms/wsjt/Makefile b/comms/wsjt/Makefile
new file mode 100644
index 000000000000..8fe26c7ef348
--- /dev/null
+++ b/comms/wsjt/Makefile
@@ -0,0 +1,68 @@
+# New ports collection makefile for:	wsjt
+# Date created:				3rd August 2006
+# Whom:					Diane Bruce <db@db.net>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	wsjt
+PORTVERSION=	5.9.6
+CATEGORIES=	comms hamradio
+MASTER_SITES=	${MASTER_SITE_BERLIOS}
+MASTER_SITE_SUBDIR=	wsjt
+DISTNAME=	wsjt-5.9.6.r309
+EXTRACT_SUFX=	.tgz
+
+MAINTAINER=	db@db.net
+COMMENT=	Weak signal ham radio communication pakage
+
+BUILD_DEPENDS=	gfortran41:${PORTSDIR}/lang/gfortran \
+		${PYTHON_SITELIBDIR}/scipy:${PORTSDIR}/science/py-scipy \
+		${PYTHON_SITELIBDIR}/f2py2e:${PORTSDIR}/lang/f2py
+#		${PYTHON_SITELIBDIR}/_tkinter.so:${PORTSIDR}/x11-toolkits/py-tkinter
+LIB_DEPENDS=	samplerate:${PORTSDIR}/audio/libsamplerate
+
+ONLY_FOR_ARCHS=	i386
+ONLY_FOR_ARCHS_REASON=	WIP for amd64 and perhaps others
+
+GNU_CONFIGURE=	yes
+USE_GMAKE=	yes
+USE_PYTHON=	2.4+
+PYNUMERIC=	yes
+USE_AUTOTOOLS=	libtool:15
+
+#
+# This until Joe renames the tarball properly --db
+#
+post-extract:
+	@${MV} ${WRKDIR}/wsjt596r309 ${WRKDIR}/wsjt-5.9.6.r309
+
+pre-configure:
+	@${CP} ${FILESDIR}/portaudio-v19-Makefile ${WRKSRC}/portaudio-v19/Makefile
+	@${CP} ${FILESDIR}/portaudio-v19-config.status ${WRKSRC}/portaudio-v19/config.status
+
+do-install:
+	@${MKDIR} ${DATADIR}
+	@${INSTALL_DATA} ${WRKSRC}/CALL3.TXT ${DATADIR}
+	@${INSTALL_DATA} ${WRKSRC}/wsjt.py ${PREFIX}/bin
+	@${INSTALL_SCRIPT} ${WRKSRC}/wsjt ${PREFIX}/bin
+.for d in ${WRKSRC}/Audio.so ${WRKSRC}/Pmw.py \
+	${WRKSRC}/PmwBlt.py ${WRKSRC}/palettes.py \
+	${WRKSRC}/PmwColor.py ${WRKSRC}/go.py \
+	${WRKSRC}/specjt.py ${WRKSRC}/astro.py \
+	${WRKSRC}/options.py ${WRKSRC}/smeter.py ${WRKSRC}/g.py
+	@${INSTALL_DATA} ${WRKSRC}/${d} ${PYTHON_SITELIBDIR}
+.endfor
+.if	!defined(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}
+.for d in ${WRKSRC}/Announce.txt ${WRKSRC}/UpdateHistory.txt\
+	${WRKSRC}/LICENSE.TXT WSJT_Source_Code.txt
+	@${INSTALL_DATA} ${WRKSRC}/${d} ${DOCSDIR}
+.endfor
+	@${ECHO} ""
+	@${ECHO} "docs installed in ${DOCSDIR}"
+	@${ECHO} ""
+.endif
+	@${CAT} ${PKGMESSAGE}
+
+.include <bsd.port.mk>
diff --git a/comms/wsjt/distinfo b/comms/wsjt/distinfo
new file mode 100644
index 000000000000..00786038ab99
--- /dev/null
+++ b/comms/wsjt/distinfo
@@ -0,0 +1,3 @@
+MD5 (wsjt-5.9.6.r309.tgz) = 4504b2c65915a201728bdd4f7abe1898
+SHA256 (wsjt-5.9.6.r309.tgz) = e868f3d04a1f8216af23d2a2900782e9238a21b5b1b38112365eb09520fefe53
+SIZE (wsjt-5.9.6.r309.tgz) = 7019606
diff --git a/comms/wsjt/files/patch-Makefile.in b/comms/wsjt/files/patch-Makefile.in
new file mode 100644
index 000000000000..f22d22b6ae9a
--- /dev/null
+++ b/comms/wsjt/files/patch-Makefile.in
@@ -0,0 +1,10 @@
+--- Makefile.in.orig	Thu Nov  2 10:15:28 2006
++++ Makefile.in	Thu Nov  2 10:15:41 2006
+@@ -100,7 +100,6 @@
+ 	$(FC) -o JT65code $(OBJS1)
+ 
+ portaudio-v19/lib/.libs/libportaudio.a:
+-	(cd portaudio-v19;./configure --with-jack=no)
+ 	(cd portaudio-v19;${MAKE})
+ 
+ wsjt6:	@NEEDPORTAUDIO@ Audio.so #wsjt.spec
diff --git a/comms/wsjt/files/portaudio-v19-Makefile b/comms/wsjt/files/portaudio-v19-Makefile
new file mode 100644
index 000000000000..688d575477a5
--- /dev/null
+++ b/comms/wsjt/files/portaudio-v19-Makefile
@@ -0,0 +1,197 @@
+#
+# PortAudio V19 Makefile.in
+#
+# Dominic Mazzoni
+# Modifications by Mikael Magnusson
+#
+
+top_srcdir = .
+srcdir = .
+VPATH = 
+top_builddir = .
+PREFIX = /usr/local
+prefix = $(PREFIX)
+exec_prefix = ${prefix}
+bindir = ${exec_prefix}/bin
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+CC = gcc
+CFLAGS = -g -O2 -DPA_LITTLE_ENDIAN -pthread -I$(top_srcdir)/include -I$(top_srcdir)/src/common -I$(top_srcdir)/src/os/unix -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_CLOCK_GETTIME=1 -DHAVE_NANOSLEEP=1 -DPA_USE_OSS=1 
+LIBS =  -lm -lpthread
+AR = /usr/bin/ar
+RANLIB = ranlib
+LIBTOOL = libtool
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+SHARED_FLAGS = -shared -fPIC
+LDFLAGS = 
+DLL_LIBS =  -lm -lpthread
+CXXFLAGS = -g -O2
+NASM = 
+NASMOPT = 
+LN_S = ln -s
+LT_RELEASE=@LT_RELEASE@
+LT_CURRENT=2
+LT_REVISION=0
+LT_AGE=0
+
+OTHER_OBJS =  src/hostapi/oss/pa_unix_oss.o src/os/unix/pa_unix_hostapis.o src/os/unix/pa_unix_util.o
+
+PALIB = libportaudio.la
+PAINC = include/portaudio.h
+
+PA_LDFLAGS = $(LDFLAGS) $(SHARED_FLAGS) -rpath $(libdir) -no-undefined -export-symbols-regex "Pa_.*" -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
+#MAKEFILE = Makefile
+
+COMMON_OBJS = \
+	src/common/pa_allocation.o \
+	src/common/pa_converters.o \
+	src/common/pa_cpuload.o \
+	src/common/pa_dither.o \
+	src/common/pa_front.o \
+	src/common/pa_process.o \
+	src/common/pa_skeleton.o \
+	src/common/pa_stream.o \
+	src/common/pa_trace.o
+
+TESTS = \
+	bin/paqa_devs \
+	bin/paqa_errs \
+	bin/patest1 \
+	bin/patest_buffer \
+	bin/patest_callbackstop \
+	bin/patest_clip \
+	bin/patest_dither \
+	bin/patest_hang \
+	bin/patest_in_overflow \
+	bin/patest_latency \
+	bin/patest_leftright \
+	bin/patest_longsine \
+	bin/patest_many \
+	bin/patest_maxsines \
+	bin/patest_multi_sine \
+	bin/patest_out_underflow \
+	bin/patest_pink \
+	bin/patest_prime \
+	bin/patest_read_record \
+	bin/patest_read_write_wire \
+	bin/patest_record \
+	bin/patest_ringmix \
+	bin/patest_saw \
+	bin/patest_sine8 \
+	bin/patest_sine \
+	bin/patest_sine_formats \
+	bin/patest_sine_time \
+	bin/patest_start_stop \
+	bin/patest_stop \
+	bin/patest_toomanysines \
+	bin/patest_underflow \
+	bin/patest_wire \
+	bin/patest_write_sine \
+	bin/pa_devs \
+	bin/pa_fuzz \
+	bin/pa_minlat
+
+# Most of these don't compile yet.  Put them in TESTS, above, if
+# you want to try to compile them...
+ALL_TESTS = \
+	$(TESTS) \
+	bin/patest_sync \
+	bin/debug_convert \
+	bin/debug_dither_calc \
+	bin/debug_dual \
+	bin/debug_multi_in \
+	bin/debug_multi_out \
+	bin/debug_record \
+	bin/debug_record_reuse \
+	bin/debug_sine_amp \
+	bin/debug_sine \
+	bin/debug_sine_formats \
+	bin/debug_srate \
+	bin/debug_test1
+
+OBJS = $(COMMON_OBJS) $(OTHER_OBJS)
+
+LTOBJS:= $(OBJS:.o=.lo)
+
+SUBDIRS =
+#SUBDIRS += bindings/cpp
+
+all: lib/$(PALIB) all-recursive tests
+
+tests: bin-stamp $(TESTS)
+
+
+lib/$(PALIB): lib-stamp $(LTOBJS) $(MAKEFILE) $(PAINC)
+	$(LIBTOOL) --mode=link $(CC) $(PA_LDFLAGS) -o lib/$(PALIB) $(LTOBJS) $(DLL_LIBS)
+
+$(ALL_TESTS): bin/%: lib/$(PALIB) $(MAKEFILE) $(PAINC) test/%.c
+	$(LIBTOOL) --mode=link $(CC) -o $@ $(CFLAGS) $(top_srcdir)/test/$*.c lib/$(PALIB) $(LIBS)
+
+
+install: lib/$(PALIB) portaudio-2.0.pc
+	$(INSTALL) -d $(DESTDIR)$(libdir)
+	$(LIBTOOL) --mode=install $(INSTALL) lib/$(PALIB) $(DESTDIR)$(libdir)
+	$(INSTALL) -d $(DESTDIR)$(includedir)
+	$(INSTALL_DATA) -m 644 $(top_srcdir)/$(PAINC) $(DESTDIR)$(includedir)/portaudio.h
+	$(INSTALL) -d $(DESTDIR)$(libdir)/pkgconfig
+	$(INSTALL) -m 644 portaudio-2.0.pc $(DESTDIR)$(libdir)/pkgconfig/portaudio-2.0.pc
+	@echo ""
+	@echo "------------------------------------------------------------"
+	@echo "PortAudio was successfully installed."
+	@echo ""
+	@echo "On some systems (e.g. Linux) you should run 'ldconfig' now"
+	@echo "to make the shared object available.  You may also need to"
+	@echo "modify your LD_LIBRARY_PATH environment variable to include"
+	@echo "the directory $(libdir)"
+	@echo "------------------------------------------------------------"
+	@echo ""
+	$(MAKE) install-recursive
+
+uninstall:
+	$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(PALIB)
+	$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(includedir)/portaudio.h
+	$(MAKE) uninstall-recursive
+
+clean:
+	rm -f $(LTOBJS) $(ALL_TESTS) lib/$(PALIB)
+	rm -f bin-stamp lib-stamp
+	-rm -rf bin lib
+
+distclean: clean
+	rm -f config.log config.status Makefile portaudio-2.0.pc
+
+%.o: %.c $(MAKEFILE) $(PAINC)
+	$(CC) -c $(CFLAGS) $< -o $@
+
+%.lo: %.c $(MAKEFILE) $(PAINC)
+	$(LIBTOOL) --mode=compile $(CC) -c $(CFLAGS) $< -o $@
+
+%.o: %.cpp $(MAKEFILE) $(PAINC)
+	$(CXX) -c $(CXXFLAGS) $< -o $@
+
+%.o: %.asm
+	$(NASM) $(NASMOPT) -o $@ $<
+
+bin-stamp:
+	-mkdir bin
+	touch $@
+
+lib-stamp:
+	-mkdir lib
+	-mkdir -p src/os/win src/os/unix src/os/mac_osx src/common \
+src/hostapi/oss src/hostapi/alsa src/hostapi/jack src/hostapi/asihpi \
+src/hostapi/wmme src/hostapi/wdmks src/hostapi/dsound src/hostapi/wasapi
+	touch $@
+
+Makefile: Makefile.in config.status
+	$(SHELL) config.status
+
+all-recursive:
+	for dir in $(SUBDIRS); do make -C $$dir all; done
+
+install-recursive:
+	for dir in $(SUBDIRS); do make -C $$dir install; done
+
+uninstall-recursive:
+	for dir in $(SUBDIRS); do make -C $$dir uninstall; done
diff --git a/comms/wsjt/files/portaudio-v19-config.status b/comms/wsjt/files/portaudio-v19-config.status
new file mode 100644
index 000000000000..82422a043f9a
--- /dev/null
+++ b/comms/wsjt/files/portaudio-v19-config.status
@@ -0,0 +1,763 @@
+#! /usr/local/bin/bash
+# Generated by configure.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=${CONFIG_SHELL-/usr/local/bin/bash}
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+config_files=" Makefile portaudio-2.0.pc"
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+ac_cs_version="\
+config.status
+configured by ./configure, generated by GNU Autoconf 2.59,
+  with options \"'--with-jack=no'\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=.
+INSTALL="/usr/bin/install -c"
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+if $ac_cs_recheck; then
+  echo "running /usr/local/bin/bash ./configure " '--with-jack=no' $ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec /usr/local/bin/bash ./configure '--with-jack=no' $ac_configure_extra_args --no-create --no-recursion
+fi
+
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "portaudio-2.0.pc" ) CONFIG_FILES="$CONFIG_FILES portaudio-2.0.pc" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
+s,@SHELL@,/usr/local/bin/bash,;t t
+s,@PATH_SEPARATOR@,:,;t t
+s,@PACKAGE_NAME@,,;t t
+s,@PACKAGE_TARNAME@,,;t t
+s,@PACKAGE_VERSION@,,;t t
+s,@PACKAGE_STRING@,,;t t
+s,@PACKAGE_BUGREPORT@,,;t t
+s,@exec_prefix@,${prefix},;t t
+s,@prefix@,/usr/local,;t t
+s,@program_transform_name@,s,x,x,,;t t
+s,@bindir@,${exec_prefix}/bin,;t t
+s,@sbindir@,${exec_prefix}/sbin,;t t
+s,@libexecdir@,${exec_prefix}/libexec,;t t
+s,@datadir@,${prefix}/share,;t t
+s,@sysconfdir@,${prefix}/etc,;t t
+s,@sharedstatedir@,${prefix}/com,;t t
+s,@localstatedir@,${prefix}/var,;t t
+s,@libdir@,${exec_prefix}/lib,;t t
+s,@includedir@,${prefix}/include,;t t
+s,@oldincludedir@,/usr/include,;t t
+s,@infodir@,${prefix}/info,;t t
+s,@mandir@,${prefix}/man,;t t
+s,@build_alias@,,;t t
+s,@host_alias@,,;t t
+s,@target_alias@,,;t t
+s,@DEFS@,-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_CLOCK_GETTIME=1 -DHAVE_NANOSLEEP=1 -DPA_USE_OSS=1 ,;t t
+s,@ECHO_C@,,;t t
+s,@ECHO_N@,-n,;t t
+s,@ECHO_T@,,;t t
+s,@LIBS@, -lm -lpthread,;t t
+s,@CC@,gcc,;t t
+s,@CFLAGS@,-g -O2 -DPA_LITTLE_ENDIAN -pthread,;t t
+s,@LDFLAGS@,,;t t
+s,@CPPFLAGS@,,;t t
+s,@ac_ct_CC@,gcc,;t t
+s,@EXEEXT@,,;t t
+s,@OBJEXT@,o,;t t
+s,@build@,i386-unknown-freebsd6.2,;t t
+s,@build_cpu@,i386,;t t
+s,@build_vendor@,unknown,;t t
+s,@build_os@,freebsd6.2,;t t
+s,@host@,i386-unknown-freebsd6.2,;t t
+s,@host_cpu@,i386,;t t
+s,@host_vendor@,unknown,;t t
+s,@host_os@,freebsd6.2,;t t
+s,@EGREP@,grep -E,;t t
+s,@LN_S@,ln -s,;t t
+s,@ECHO@,echo,;t t
+s,@AR@,/usr/bin/ar,;t t
+s,@ac_ct_AR@,ar,;t t
+s,@RANLIB@,ranlib,;t t
+s,@ac_ct_RANLIB@,ranlib,;t t
+s,@STRIP@,strip,;t t
+s,@ac_ct_STRIP@,strip,;t t
+s,@DLLTOOL@,dlltool,;t t
+s,@ac_ct_DLLTOOL@,,;t t
+s,@AS@,as,;t t
+s,@ac_ct_AS@,,;t t
+s,@OBJDUMP@,objdump,;t t
+s,@ac_ct_OBJDUMP@,,;t t
+s,@CPP@,gcc -E,;t t
+s,@CXX@,g++,;t t
+s,@CXXFLAGS@,-g -O2,;t t
+s,@ac_ct_CXX@,g++,;t t
+s,@CXXCPP@,g++ -E,;t t
+s,@F77@,f77,;t t
+s,@FFLAGS@,-g -O2,;t t
+s,@ac_ct_F77@,f77,;t t
+s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t
+s,@INSTALL_PROGRAM@,${INSTALL},;t t
+s,@INSTALL_SCRIPT@,${INSTALL},;t t
+s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
+s,@PKG_CONFIG@,/usr/local/bin/pkg-config,;t t
+s,@ac_pt_PKG_CONFIG@,/usr/local/bin/pkg-config,;t t
+s,@JACK_CFLAGS@,-I/usr/local/include  ,;t t
+s,@JACK_LIBS@,-pthread -L/usr/local/lib -ljack  ,;t t
+s,@LT_CURRENT@,2,;t t
+s,@LT_REVISION@,0,;t t
+s,@LT_AGE@,0,;t t
+s,@OTHER_OBJS@, src/hostapi/oss/pa_unix_oss.o src/os/unix/pa_unix_hostapis.o src/os/unix/pa_unix_util.o,;t t
+s,@PADLL@,libportaudio.so,;t t
+s,@SHARED_FLAGS@,-shared -fPIC,;t t
+s,@THREAD_CFLAGS@,-pthread,;t t
+s,@DLL_LIBS@, -lm -lpthread,;t t
+s,@NASM@,,;t t
+s,@NASMOPT@,,;t t
+s,@subdirs@,,;t t
+s,@ENABLE_CXX_TRUE@,#,;t t
+s,@ENABLE_CXX_FALSE@,,;t t
+s,@LIBOBJS@,,;t t
+s,@LTLIBOBJS@,,;t t
+CEOF
+
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  sed "/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}
+
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+
+{ (exit 0); exit 0; }
diff --git a/comms/wsjt/pkg-descr b/comms/wsjt/pkg-descr
new file mode 100644
index 000000000000..033e244dba25
--- /dev/null
+++ b/comms/wsjt/pkg-descr
@@ -0,0 +1,8 @@
+WSJT is a computer program for amateur radio VHF/UHF communication
+using state of the art digital techniques. Typical applications
+include communication by meteor scatter and
+EME (Earth-Moon-Earth) propagation paths.
+
+WWW: http://pulsar.princeton.edu/~joe/K1JT
+
+- Diane Bruce, VA3DB
diff --git a/comms/wsjt/pkg-message b/comms/wsjt/pkg-message
new file mode 100644
index 000000000000..7eab46896a07
--- /dev/null
+++ b/comms/wsjt/pkg-message
@@ -0,0 +1,10 @@
+wsjt is now installed.
+When used for the first time, the wsjt wrapper will create a ~/.wsjt
+directory which will be your working directory and have various setup files.
+
+In particular, CALL3.TXT will most likely be out of date.
+Update from http://www.dl8ebw.de/DATABASE/database.html
+
+Now, go chase some EME or meteor shower.
+
+- 73 Diane VA3DB
diff --git a/comms/wsjt/pkg-plist b/comms/wsjt/pkg-plist
new file mode 100644
index 000000000000..1c1bc5a8b72f
--- /dev/null
+++ b/comms/wsjt/pkg-plist
@@ -0,0 +1,20 @@
+bin/wsjt
+bin/wsjt.py
+%%DATADIR%%/CALL3.TXT
+%%PYTHON_SITELIBDIR%%/Audio.so
+%%PYTHON_SITELIBDIR%%/Pmw.py
+%%PYTHON_SITELIBDIR%%/PmwBlt.py
+%%PYTHON_SITELIBDIR%%/PmwColor.py
+%%PYTHON_SITELIBDIR%%/astro.py
+%%PYTHON_SITELIBDIR%%/g.py
+%%PYTHON_SITELIBDIR%%/go.py
+%%PYTHON_SITELIBDIR%%/options.py
+%%PYTHON_SITELIBDIR%%/palettes.py
+%%PYTHON_SITELIBDIR%%/smeter.py
+%%PYTHON_SITELIBDIR%%/specjt.py
+%%PORTDOCS%%%%DOCSDIR%%/Announce.txt
+%%PORTDOCS%%%%DOCSDIR%%/LICENSE.TXT
+%%PORTDOCS%%%%DOCSDIR%%/UpdateHistory.txt
+%%PORTDOCS%%%%DOCSDIR%%/WSJT_Source_Code.txt
+%%PORTDOCS%%@dirrm %%DOCSDIR%%
+@dirrm %%DATADIR%%