Add definitions for new prefixes of German mobile phone networks (D1: 0170,

0D2: 173, E+: 0178).

I do not know and thus can't add a definition for SMS to Viag-Interkom's E2.

1 files changed, 284 insertions, 0 deletions

diff --git a/comms/yaps/files/patch-ae b/comms/yaps/files/patch-ae
new file mode 100644
index 000000000000..872830aa71be
--- /dev/null
+++ b/comms/yaps/files/patch-ae
@@ -0,0 +1,284 @@
+--- yaps.rc~	Wed Jun 11 19:39:06 1997
++++ yaps.rc	Tue Oct 17 21:11:37 2000
+@@ -7,12 +7,11 @@
+ #########################################
+ #
+-#	This is a comma seperated list of available services. This
+-#	is required for autodetect the matching service for a
+-#	pager-id
+-services	D1,D2,E+
++#	This is a comma seperated list of available services. This list
++#	is required to autodetect the matching service for a pager-id.
++services	D1_170,D1_171,D2_172,D2_173,E+_177,E+_178
+ +services	Telmi,Telmi-Fun,Telmi-Family,Telmi-Top,Telmi-Pro
+ +services	Skyper,Quix
+ #
+-#	This is the default caller-id. If the protocol/service allowes
++#	This is the default caller-id. If the protocol/service allows
+ #	it, this is inserted in the message (and the receiver gets this
+ #	as the sender's number)
+@@ -23,9 +22,9 @@
+ signature	(It's me!)
+ #
+-#	You can either switch the use of the signature here on for all
++#	You can either enable the use of the signature here for all
+ #	services or in each service section for that particular service.
+ use-signature	True
+ #
+-#	To get more verbose output when running yaps increase this value.
++#	Increase this value to get more verbose output when running yaps.
+ #	Currently 4 is the highest supported value.
+ verbose		0
+@@ -33,5 +32,5 @@
+ #	If you'd like to log every sending session define this. It should
+ #	point to a writeable file. If you install the software setgid, then
+-#	change the group of this file to the same yaps uses and make it
++#	change the group of this file to the one yaps uses and make it
+ #	group writeable.
+ logfile		/var/log/yaps.log
+@@ -41,5 +40,5 @@
+ modems		standard
+ #
+-#	some global defaults for the serial interface (even if the most
++#	some global defaults for the serial interface (even if most
+ #	protocols are assuming 7e1, these settings seem to work well)
+ speed		38400
+@@ -49,11 +48,11 @@
+ 
+ #
+-#	To calculate the cost for each call, you can define some globales
+-#	here and do the fine tuning in each protocol
++#	To calculate the cost for each call, you can define some globals
++#	here and do the fine tuning in each protocol section
+ cost	cost=0.12,unit=DM,remainder=2,dial-overhead=13
+ 
+ #
+-#	These are two example of internal conversion tables. The can be
+-#	used using the `convert' entry (see below).
++#	These are two examples of internal conversion tables. They can be
++#	used via the `convert' entry (see below).
+ cv-default	{
+ 	Ä	[
+@@ -75,5 +74,5 @@
+ #
+ #	These values are normally only found in each service section,
+-#	but are listen here with an explaination for completeness.
++#	but are listed here with an explaination for completeness.
+ #
+ #	This is the phone number of the modem gateway for this service
+@@ -87,11 +86,11 @@
+ 
+ #
+-#	Most services limit the length of a message to a specific length.
+-#	Enter the value here to check valid messages
++#	Most services limit the length of a message to some value.
++#	Enter the value here to check valid messages.
+ #max-size	160
+ 
+ #
+ #	If a message is longer than max-size, you can set this to split
+-#	it off into several single messages of allowed length
++#	it off into several single messages of maximum allowed length.
+ #may-split	True
+ 
+@@ -103,5 +102,5 @@
+ #
+ #	Some services allow to send more than one message per session. If
+-#	it is limited, set it using this parameter
++#	there is a limit, set it using this parameter.
+ #max-messages	1
+ 
+@@ -111,6 +110,6 @@
+ 
+ #
+-#	If the service is reachable over a phonenumber where the pager-id
+-#	is part of the phone number, define this and add a `%P' anywehere
++#	If the service is reachable over a phone number where the pager-id
++#	is part of the phone number, define this and add a `%P' anywhere
+ #	in the `phone' number.
+ #insert-pager-id	True
+@@ -125,6 +124,6 @@
+ 
+ #
+-#	Check for valid call id (see below for more details) While 
+-#	valid-pid is required, this is optional
++#	Check for valid call id (see below for more details). While 
++#	valid-pid is required, this is optional.
+ #valid-cid	^(001|1)
+ #change-cid	001
+@@ -136,5 +135,5 @@
+ #valid-pid	^(0171|0049171)
+ #valid-pid	0171|0049171
+-#	Use these paramters in the global section if you want do not want
++#	Use these paramters in the global section if you do not want
+ #	to check pager-ids (and do not set change-pid):
+ #valid-pid	.
+@@ -148,24 +147,24 @@
+ #
+ #	As the services do not use (in general) the ISO 8859/1 character set,
+-#	one can define convertion tables. you can either specify a file which
++#	one can define conversion tables. You can either specify a file which
+ #	contains the convertion rules:
+ #conv-table	/usr/local/lib/yaps/iso2din.tab
+ 
+-#	or use predefined convertion rules
++#	or use predefined conversion rules:
+ #convert	*no-control,*no-8bit,cv-default,cv-extended
+ 
+ #
+ #	If this is set, send a message even if a requested feature is
+-#	not available
++#	not available.
+ #force		True
+ 
+ #
+-#	If the provider supportes to set a delay for sending the message,
+-#	set this
++#	If the provider supports to set a delay for sending the message,
++#	set this.
+ #can-delay	True
+ 
+ #
+-#	If the provider can delete a buffered message after a period of time,
+-#	set this
++#	If the provider may delete a buffered message after some period of time,
++#	set this.
+ #can-expire	True
+ 
+@@ -176,5 +175,5 @@
+ #
+ #	To check wether a call-id/pager-id is valid use these paramters.
+-#	For the exact syntax see the documentation
++#	For the exact syntax see the documentation.
+ #check-call-id	>1111111111111111<
+ #check-pager-id	>1111111111111111<
+@@ -183,8 +182,8 @@
+ #
+ #	These values are typically found in a modem section, but can also
+-#	appear in the global section to set some defaults
++#	appear in the global section to set some defaults.
+ 
+ #
+-#	Set this to the modem device you wish to use
++#	Set this to the modem device you wish to use.
+ #device		/dev/modem
+ #device		/dev/cua1
+@@ -201,5 +200,5 @@
+ #	The different format of the part which is appended to the lockfile
+ #	and the contents can be specified here. See documentation for a
+-#	full list inclusive explaination
++#	full list inclusive explaination.
+ #lock-method	sysv4
+ #lock-method	binary
+@@ -208,13 +207,13 @@
+ #
+ #	These are send/expect sequences to talk to the modem. For an exact
+-#	definition see (again) the documentation. Following entries are
++#	definition see (again) the documentation. The following entries are
+ #	supported:
+-#	init:		to initialize the modem
++#	init:		initialize the modem
+ #	local-init:	a second initialization string, used to customize
+-#			already defined modems for different handling
+-#	dial:		to dial a phone number %L is replaced with the
+-#			phone number itself
+-#	timeout:	the default timeout in seconds to wait for answers
+-#	reset:		to reset the modem
++#			already initialized modems
++#	dial:		dial a phone number; %L is replaced with the
++#			phone number to dial
++#	timeout:	the default timeout in seconds to wait for an answer
++#	reset:		reset the modem
+ 
+ #########################################
+@@ -224,5 +223,26 @@
+ #	D1 (by Deutsche Telekom)
+ #
+-[D1]
++[D1_170]
++protocol	tap
++valid-pid	0170|0049170|49170
++change-pid	0170
++convert		*no-8bit,cv-d1
++cv-d1		{
++	Ä	[
++	Ö	\
++	Ü	~
++	ä	{
++	ö	|
++	ü	~
++	ß	^]
++}
+++cost		timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++phone		01712092522
++max-size	160
++may-split	True
++use-call-id	False
++tap-old		True
++#
++[D1_171]
+ protocol	tap
+ valid-pid	0171|0049171|49171
+@@ -247,5 +267,5 @@
+ #	D2 (by Mannesmann Mobilfunk)
+ #
+-[D2]
++[D2_172]
+ modem		standard-d2
+ protocol	ucp
+@@ -265,8 +285,26 @@
+ ucp-extend	True
+ #
++[D2_173]
++modem		standard-d2
++protocol	ucp
++valid-pid	0173|0049173|49173
++change-pid	0173
++convert		*no-8bit,cv-default
+++cost		timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++phone		01722278020
++max-size	160
++may-split	True
++use-call-id	True
++can-delay	True
++can-expire	True
++can-rds		True
++check-call-id	>1111111111111111<
++check-pager-id	>1111111111111111<
++ucp-extend	True
++#
+ #	E+ (by ???)
+ #	!! UNTESTED !!
+ #
+-[E+]
++[E+_177]
+ protocol	tap
+ valid-pid	0177|0049177|49177
+@@ -279,4 +317,16 @@
+ use-call-id	False
+ #
++[E+_178]
++protocol	tap
++valid-pid	0178|0049178|49178
++change-pid	0178
++convert		*no-8bit,cv-default
+++cost		timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++ls -ltr
++phone		01771167
++max-size	160
++may-split	True
++use-call-id	False
++#
+ #	Telmi, Telmi-* (by Deutsche Funkruf)
+ #	!! ONLY TESTED FOR TELMI-FUN !!
+@@ -336,7 +386,8 @@
+ #
+ #	Older Unix versions
+-lock-prefix	/usr/spool/uucp/LCK..
++#lock-prefix	/usr/spool/uucp/LCK..
+ #	Newer Unix versions
+-#lock-prefix	/var/spool/uucp/LCK..
++lock-prefix	/var/spool/uucp/LCK..
++#lock-prefix	/var/spool/lock/LCK..
+ #lock-prefix	/var/lock/LCK..
+ #	SysV4