- Update to 0.9.0 .

- Add devinput driver (/dev/input/eventX, -H devinput) in preparation
  for upcoming webcamd update that will support it.
- Fix build with clang, and a few bugs it found too.

7 files changed, 137 insertions, 7 deletions

diff --git a/comms/lirc/Makefile b/comms/lirc/Makefile
index ed088cae4a0f..c81ea71e1b12 100644
--- a/comms/lirc/Makefile
+++ b/comms/lirc/Makefile
@@ -6,29 +6,33 @@
 #
 
 PORTNAME=	lirc
-PORTVERSION=	0.9.0p1
-PORTREVISION=	7
+PORTVERSION=	0.9.0
+PORTEPOCH=	1
 CATEGORIES=	comms
-MASTER_SITES=	http://lirc.org/software/snapshots/
+MASTER_SITES=	SF/${PORTNAME}/LIRC/${PORTVERSION}
 DISTNAME=	${PORTNAME}-${PORTVERSION:S/p1/-pre1/}
 
 MAINTAINER=	nox@FreeBSD.org
 COMMENT=	Linux Infrared Remote Control
 
+BUILD_DEPENDS=	v4l_compat>=1.0.20110603:${PORTSDIR}/multimedia/v4l_compat
+
 USE_AUTOTOOLS=	libtool automake autoheader aclocal autoconf
 ACLOCAL_ARGS=	-I "${ACLOCAL_DIR}" -I ${LOCALBASE}/share/aclocal
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 USE_XORG=	x11
 USE_PYTHON=	yes
+USE_CSTD=	gnu89
 GNU_CONFIGURE=	yes
 USE_LDCONFIG=	yes
 MAKE_JOBS_SAFE=	yes
 
-CONFIGURE_ARGS=		--enable-sandboxed --with-devdir=/var/run/lirc
+CONFIGURE_ARGS=		--enable-sandboxed --with-devdir=/var/run/lirc \
+			--sysconfdir=${PREFIX}/etc
 CPPFLAGS+=		-I${LOCALBASE}/include
 LDFLAGS+=		-L${LOCALBASE}/lib
-CONFIGURE_ENV+=		CPPFLAGS="${CPPFLAGS}" LDFLAGS="${LDFLAGS}"
+CONFIGURE_ENV+=		LDFLAGS="${LDFLAGS}"
 
 OPTIONS=	MINIMAL "Build with minmal dependencies" Off \
 		DEBUG "Build debug version" Off
diff --git a/comms/lirc/distinfo b/comms/lirc/distinfo
index e2b8bd5de767..2c4230341988 100644
--- a/comms/lirc/distinfo
+++ b/comms/lirc/distinfo
@@ -1,2 +1,2 @@
-SHA256 (lirc-0.9.0-pre1.tar.bz2) = 6724514d76077cc087bd4e12d880744442223e7e4ecfd0aa515c1610bc13b5f1
-SIZE (lirc-0.9.0-pre1.tar.bz2) = 837920
+SHA256 (lirc-0.9.0.tar.bz2) = 6323afae6ad498d4369675f77ec3dbb680fe661bea586aa296e67f2e2daba4ff
+SIZE (lirc-0.9.0.tar.bz2) = 857286
diff --git a/comms/lirc/files/lircd.conf.in b/comms/lirc/files/lircd.conf.in
index 6dfc9dfeb368..e80e52186013 100644
--- a/comms/lirc/files/lircd.conf.in
+++ b/comms/lirc/files/lircd.conf.in
@@ -556,3 +556,10 @@ end remote
 
 # also support by default remotes coming with MCE USB receivers
 include "%%EXAMPLESDIR%%/remotes/mceusb/lircd.conf.mceusb"
+
+# ..and the devinput driver that can be used with the updated webcamd
+# by setting the following in rc.conf(5):
+#
+#	lircd_flags="-H devinput"
+#	lircd_device="/dev/input/event0"
+include "%%EXAMPLESDIR%%/remotes/devinput/lircd.conf.devinput"
diff --git a/comms/lirc/files/patch-daemons::dump_config.c b/comms/lirc/files/patch-daemons::dump_config.c
new file mode 100644
index 000000000000..6e3e61dde355
--- /dev/null
+++ b/comms/lirc/files/patch-daemons::dump_config.c
@@ -0,0 +1,36 @@
+--- daemons/dump_config.c.orig
++++ daemons/dump_config.c
+@@ -120,11 +120,11 @@ void fprint_remote_head(FILE * f, struct
+ 	if (!is_raw(rem)) {
+ 		if (rem->pre_data_bits > 0) {
+ 			fprintf(f, "  pre_data_bits   %d\n", rem->pre_data_bits);
+-			fprintf(f, "  pre_data       0x%llX\n", rem->pre_data);
++			fprintf(f, "  pre_data       0x%llX\n", (unsigned long long)rem->pre_data);
+ 		}
+ 		if (rem->post_data_bits > 0) {
+ 			fprintf(f, "  post_data_bits  %d\n", rem->post_data_bits);
+-			fprintf(f, "  post_data      0x%llX\n", rem->post_data);
++			fprintf(f, "  post_data      0x%llX\n", (unsigned long long)rem->post_data);
+ 		}
+ 		if (rem->pre_p != 0 && rem->pre_s != 0) {
+ 			fprintf(f, "  pre         %5u %5u\n", (__u32) rem->pre_p, (__u32) rem->pre_s);
+@@ -151,15 +151,15 @@ void fprint_remote_head(FILE * f, struct
+ 		if (rem->min_code_repeat > 0) {
+ 			fprintf(f, "  min_code_repeat %d\n", rem->min_code_repeat);
+ 		}
+-		fprintf(f, "  toggle_bit_mask 0x%llX\n", rem->toggle_bit_mask);
++		fprintf(f, "  toggle_bit_mask 0x%llX\n", (unsigned long long)rem->toggle_bit_mask);
+ 		if (has_toggle_mask(rem)) {
+-			fprintf(f, "  toggle_mask    0x%llX\n", rem->toggle_mask);
++			fprintf(f, "  toggle_mask    0x%llX\n", (unsigned long long)rem->toggle_mask);
+ 		}
+ 		if (rem->rc6_mask != 0) {
+-			fprintf(f, "  rc6_mask    0x%llX\n", rem->rc6_mask);
++			fprintf(f, "  rc6_mask    0x%llX\n", (unsigned long long)rem->rc6_mask);
+ 		}
+ 		if (has_ignore_mask(rem)) {
+-			fprintf(f, "  ignore_mask 0x%llX\n", rem->ignore_mask);
++			fprintf(f, "  ignore_mask 0x%llX\n", (unsigned long long)rem->ignore_mask);
+ 		}
+ 		if (is_serial(rem)) {
+ 			fprintf(f, "  baud            %d\n", rem->baud);
diff --git a/comms/lirc/files/patch-daemons::hw_devinput.c b/comms/lirc/files/patch-daemons::hw_devinput.c
new file mode 100644
index 000000000000..f87dcd3891e1
--- /dev/null
+++ b/comms/lirc/files/patch-daemons::hw_devinput.c
@@ -0,0 +1,52 @@
+--- daemons/hw_devinput.c.orig
++++ daemons/hw_devinput.c
+@@ -376,9 +376,15 @@ int devinput_decode(struct ir_remote *re
+ 	return 1;
+ }
+ 
++/* simulate key repeat if receiving the same scancode again */
++#define RPT_SCAN
++
+ char *devinput_rec(struct ir_remote *remotes)
+ {
+ 	struct input_event event;
++#ifdef RPT_SCAN
++	static struct input_event rptevent, scancodeevent;
++#endif
+ 	int rd;
+ 	ir_code value;
+ 
+@@ -399,6 +405,23 @@ char *devinput_rec(struct ir_remote *rem
+ 	LOGPRINTF(1, "time %ld.%06ld  type %d  code %d  value %d", event.time.tv_sec, event.time.tv_usec, event.type,
+ 		  event.code, event.value);
+ 
++#ifdef RPT_SCAN
++	repeat_state = RPT_UNKNOWN;
++	if (event.type == EV_KEY)
++		rptevent = event;
++	else if (event.type == EV_MSC && event.code == MSC_SCAN) {
++		if (scancodeevent.type == EV_MSC &&
++		    event.value == scancodeevent.value) {
++			if (rptevent.type == EV_KEY && rptevent.value != 0) {
++				event = rptevent;
++				event.value = 2;
++				repeat_state = RPT_YES;
++			}
++		} else if (rptevent.type == EV_KEY && rptevent.value == 0) {
++			scancodeevent = event;
++		}
++	}
++#endif
+ 	value = (unsigned)event.value;
+ #ifdef EV_SW
+ 	if (value == 2 && (event.type == EV_KEY || event.type == EV_SW)) {
+@@ -418,6 +441,9 @@ char *devinput_rec(struct ir_remote *rem
+ 		if (event.value == 2) {
+ 			repeat_state = RPT_YES;
+ 		} else {
++#ifdef RPT_SCAN
++			if (repeat_state == RPT_UNKNOWN)
++#endif
+ 			repeat_state = RPT_NO;
+ 		}
+ 	} else {
diff --git a/comms/lirc/files/patch-daemons::ir_remote.c b/comms/lirc/files/patch-daemons::ir_remote.c
new file mode 100644
index 000000000000..bc587b5a229f
--- /dev/null
+++ b/comms/lirc/files/patch-daemons::ir_remote.c
@@ -0,0 +1,11 @@
+--- daemons/ir_remote.c.orig
++++ daemons/ir_remote.c
+@@ -490,7 +490,7 @@ int write_message(char *buffer, size_t s
+ {
+ 	int len;
+ 
+-	len = snprintf(buffer, size, "%016llx %02x %s%s %s\n", code, reps, button_name, button_suffix, remote_name);
++	len = snprintf(buffer, size, "%016llx %02x %s%s %s\n", (unsigned long long)code, reps, button_name, button_suffix, remote_name);
+ 
+ 	return len;
+ }
diff --git a/comms/lirc/files/patch-daemons::lircd.c b/comms/lirc/files/patch-daemons::lircd.c
new file mode 100644
index 000000000000..b2b23d3d2fe2
--- /dev/null
+++ b/comms/lirc/files/patch-daemons::lircd.c
@@ -0,0 +1,20 @@
+--- daemons/lircd.c.orig
++++ daemons/lircd.c
+@@ -1318,7 +1318,7 @@ int send_remote(int fd, char *message, s
+ 
+ 	codes = remote->codes;
+ 	while (codes->name != NULL) {
+-		len = snprintf(buffer, PACKET_SIZE, "%016llx %s\n", codes->code, codes->name);
++		len = snprintf(buffer, PACKET_SIZE, "%016llx %s\n", (unsigned long long)codes->code, codes->name);
+ 		if (len >= PACKET_SIZE + 1) {
+ 			len = sprintf(buffer, "code_too_long\n");
+ 		}
+@@ -1338,7 +1338,7 @@ int send_name(int fd, char *message, str
+ 	    (write_socket_len(fd, protocol_string[P_BEGIN]) && write_socket_len(fd, message)
+ 	     && write_socket_len(fd, protocol_string[P_SUCCESS]) && write_socket_len(fd, protocol_string[P_DATA])))
+ 		return (0);
+-	len = snprintf(buffer, PACKET_SIZE, "1\n%016llx %s\n", code->code, code->name);
++	len = snprintf(buffer, PACKET_SIZE, "1\n%016llx %s\n", (unsigned long long)code->code, code->name);
+ 	if (len >= PACKET_SIZE + 1) {
+ 		len = sprintf(buffer, "1\ncode_too_long\n");
+ 	}