Add dhisd 4.0, DHIS server for updating dynamic DNS entries in DNS

tables.

PR:		25368
Submitted by:	Bas Kruit <baskruit@bsltwr.dhis.org>

11 files changed, 278 insertions, 0 deletions

diff --git a/dns/dhisd/Makefile b/dns/dhisd/Makefile
new file mode 100644
index 000000000000..20b89c706fb8
--- /dev/null
+++ b/dns/dhisd/Makefile
@@ -0,0 +1,74 @@
+# New ports collection makefile for:	dhisd
+# Date created:				Sun Feb 25 21:13:59 CET 2001
+# Whom:					Bas Kruit <baskruit@bsltwr.dhis.org>
+#
+# $FreeBSD$
+#
+
+PORTNAME=		dhisd
+PORTVERSION=		4.0
+CATEGORIES=		net
+MASTER_SITES=		http://bsltwr.dhis.org/ftp/pub/dhis/ \
+			ftp://ftp.dhis.org/pub/dhis/
+
+MAINTAINER=		baskruit@bsltwr.dhis.org
+
+DHISBASE=		${PREFIX}/dhis
+DIRS=			dhis dhis/bin dhis/pid dhis/db dhis/log dhis/script
+RDIRS=			dhis/bin dhis/pid dhis/db dhis/log dhis/script dhis
+
+post-patch:
+	@${ECHO} "===>   Patching Makefile"
+	${PERL} -i -p -e "s^__PREFIX__^${DHISBASE}^g" ${WRKSRC}/Makefile
+	@${ECHO} "===>   Patching documentation..."
+	${PERL} -i -p -e "s^__PREFIX__^${DHISBASE}^g" ${WRKSRC}/INSTALL
+	${PERL} -i -p -e "s^__PREFIX__^${DHISBASE}^g" ${WRKSRC}/README
+	@${ECHO} "===>   Patching dhisd.h"
+	${PERL} -i -p -e "s^__PREFIX__^${DHISBASE}^g" ${WRKSRC}/dhisd.h
+	@${ECHO} "===>   Patching dhisd.sh"
+	@${CP} ${FILESDIR}/dhisd.sh ${WRKSRC}
+	${PERL} -i -p -e "s^__PREFIX__^${PREFIX}^g" ${WRKSRC}/dhisd.sh
+
+do-install:
+
+post-install:
+.for dir in ${DIRS}
+	@${MKDIR} ${PREFIX}/${dir}
+	@${CHMOD} 700 ${PREFIX}/${dir}
+.endfor
+	${INSTALL_PROGRAM} ${WRKSRC}/dhisd ${DHISBASE}/bin
+	@${INSTALL_DATA} ${FILESDIR}/dhis.db ${DHISBASE}/db/dhis.db.sample
+	@${ECHO} "dhis/bin/dhisd" >> ${TMPPLIST}
+	@${ECHO} "dhis/db/dhis.db.sample" >> ${TMPPLIST}
+	@${CHMOD} 600 ${PREFIX}/dhis/db/*
+.if !exists(${PREFIX}/etc/rc.d/dhisd.sh)
+	${ECHO} "===>   Installing ${PREFIX}/etc/rc.d/dhid.sh startup file."
+	${INSTALL_SCRIPT} -m 751 ${FILESDIR}/dhisd.sh ${PREFIX}/etc/rc.d/dhisd.sh
+	@${ECHO} "etc/rc.d/dhisd.sh" >> ${TMPPLIST}
+.endif
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${DHISBASE}/doc
+	@${INSTALL_DATA} ${WRKSRC}/README ${DHISBASE}/doc
+	@${INSTALL_DATA} ${WRKSRC}/INSTALL ${DHISBASE}/doc
+	@${CHMOD} 755 ${DHISBASE}/doc
+	@${ECHO} "dhis/doc/README" >> ${TMPPLIST}
+	@${ECHO} "dhis/doc/INSTALL" >> ${TMPPLIST}
+	@${ECHO} "@dirrm dhis/doc" >> ${TMPPLIST}
+.endif
+.for dir in ${RDIRS}
+	@${ECHO} "@dirrm ${dir}" >> ${TMPPLIST}
+.endfor
+	@${ECHO} "--------------------------------------------------------------------------"
+	@${ECHO} "Before dhisd can run, you will need configure BIND."
+	@${ECHO} ""
+	@${ECHO} "For more information, see the following site:"
+	@${ECHO} "http://www.dhis.org/dhis/r4/server.html"
+.if !defined(NOPORTDOCS)
+	@${ECHO} "or ${DHISBASE}/doc/"
+.endif
+	@${ECHO} ""
+	@${ECHO} "For information on this port, check the following site:"
+	@${ECHO} "http://bsltwr.dhis.org/dhis/"
+	@${ECHO} "--------------------------------------------------------------------------"
+
+.include <bsd.port.mk>
diff --git a/dns/dhisd/distinfo b/dns/dhisd/distinfo
new file mode 100644
index 000000000000..1981887c4981
--- /dev/null
+++ b/dns/dhisd/distinfo
@@ -0,0 +1 @@
+MD5 (dhisd-4.0.tar.gz) = 9757deffda1b4a261f4313a4bd1b5ed1
diff --git a/dns/dhisd/files/dhis.db b/dns/dhisd/files/dhis.db
new file mode 100644
index 000000000000..c0e821458337
--- /dev/null
+++ b/dns/dhisd/files/dhis.db
@@ -0,0 +1,13 @@
+1001 { 
+        hostname        dyn1.example.com
+        hostpass        password
+     }
+
+1002 { 
+        hostname        dyn2.example.com
+        authn           32934593845689467748967498674789585769453
+        authn           56456894768497649867849769487659847684977
+        authn           22389472897348957348957389457894375849573
+        authn           23459435734957398753489573495743985743985
+      }
+
diff --git a/dns/dhisd/files/dhisd.sh b/dns/dhisd/files/dhisd.sh
new file mode 100644
index 000000000000..7847c5c6e9e0
--- /dev/null
+++ b/dns/dhisd/files/dhisd.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+case "$1" in
+start)
+	[ -x "__PREFIX__/dhis/bin/dhisd" ] && __PREFIX__/dhis/bin/dhisd > /dev/null && echo -n ' dhisd'
+	;;
+stop)
+	killall dhisd && echo -n ' dhisd'
+	;;
+*)
+	echo "Usage: `basename $0` {start|stop}" >&2
+	;;
+esac
+
+exit 0
diff --git a/dns/dhisd/files/patch-INSTALL b/dns/dhisd/files/patch-INSTALL
new file mode 100644
index 000000000000..495cbe513b52
--- /dev/null
+++ b/dns/dhisd/files/patch-INSTALL
@@ -0,0 +1,91 @@
+--- INSTALL.orig	Sun May  7 19:35:19 2000
++++ INSTALL	Mon Feb 26 01:00:37 2001
+@@ -87,17 +87,17 @@
+ 
+ 	Create the directories:
+ 
+-	/etc/dhis
+-	/etc/dhis/bin
+-	/etc/dhis/pid
+-	/etc/dhis/db
+-	/etc/dhis/log
+-	/etc/dhis/script
++	__PREFIX__
++	__PREFIX__/bin
++	__PREFIX__/pid
++	__PREFIX__/db
++	__PREFIX__/log
++	__PREFIX__/script
+ 	
+-	You may wish to create /etc/dhis/src and put dhisd-4.0 under
++	You may wish to create __PREFIX__/src and put dhisd-4.0 under
+ 	this directory.
+ 
+-	Copy dhisd to /etc/dhis/bin . This is the server binary.
++	Copy dhisd to __PREFIX__/bin . This is the server binary.
+ 
+ 	Create the database file which will hold information for
+ 	current dynamic hosts. For this installation let us assume
+@@ -105,7 +105,7 @@
+ 	example.com, and that we wish to create 3 dynamic hosts
+ 	named dyn1.example.com, dyn2.example.com and dyn3.example.com
+ 
+-	Change directory to /etc/dhis/db
++	Change directory to __PREFIX__/db
+ 	
+ 	Create a text file named dhis.db with a text editor.
+ 	The file should have three lines, one for each dynamic host.
+@@ -179,20 +179,20 @@
+ 	Change the permissions as you wish. In particular dhis.db
+ 	should not be readable by anyone. Suggested example:
+ 
+-	chmod 700 /etc/dhis /etc/dhis/*
+-	chmod 600 /etc/dhis/db/dhis.db
++	chmod 700 __PREFIX__ __PREFIX__/*
++	chmod 600 __PREFIX__/db/dhis.db
+ 
+ 	Add dhisd to your system's startup script 
+ 	(rc.local for BSD systems, SXXdhis under /etc/rc2.d
+ 	for System V). A simple line such as 
+ 
+-		/etc/dhis/bin/dhisd
++		__PREFIX__/bin/dhisd
+ 
+ 	will do. However, if your service will provide mail 
+ 	relaying as well you must specify the relay's IP address,
+ 	in which case the line should look like:
+ 
+-		/etc/dhis/bin/dhisd -m y.y.y.y
++		__PREFIX__/bin/dhisd -m y.y.y.y
+ 
+ 	where y.y.y.y is the IP address of the mail relay (may be
+ 	the same host). Check the relay-4.0.tar.gz distribution
+@@ -209,7 +209,7 @@
+ 	present, the relay machine is identified by relay.example.com.
+ 	Again, these may point to the same machine.
+ 
+-	Edit /etc/named.conf and add a section such as:
++	Edit /etc/named/named.conf and add a section such as:
+ 
+ 	zone "example.com" in {
+ 
+@@ -277,8 +277,8 @@
+ 
+ 	DNS is now running and accepting dynamic updates.
+ 
+-	You may also run /etc/dhis/bin/dhisd or 
+-	/etc/dhis/bin/dhisd -m y.y.y.y manually by now if
++	You may also run __PREFIX__/bin/dhisd or 
++	__PREFIX__/bin/dhisd -m y.y.y.y manually by now if
+ 	you wish to run DHIS at once.
+ 
+ 4. Adding Records
+@@ -301,7 +301,7 @@
+ 
+ 	run 
+ 
+-	kill -HUP `cat /etc/dhis/pid/dhisd.pid`
++	kill -HUP `cat __PREFIX__/pid/dhisd.pid`
+ 
+ 	to reload the DHIS database.
+ 
diff --git a/dns/dhisd/files/patch-Makefile b/dns/dhisd/files/patch-Makefile
new file mode 100644
index 000000000000..a1c5f7ac0bd2
--- /dev/null
+++ b/dns/dhisd/files/patch-Makefile
@@ -0,0 +1,15 @@
+--- Makefile.orig	Sat Feb 24 02:59:57 2001
++++ Makefile	Sat Feb 24 03:01:42 2001
+@@ -28,9 +28,11 @@
+ CC=gcc
+ CFLAGS=-I/usr/local/include
+ LFLAGS=-L/usr/local/lib
+-LIBS=-lbind -lgmp 
++LIBS=-lgmp 
+ OBJS=log.o network.o misc.o db.o online.o nsupdate.o main.o
+ RM=rm -f
++
++all:	dhisd
+ 
+ dhisd:	$(OBJS)
+ 	$(CC) $(LFLAGS) -o dhisd $(OBJS) $(LIBS)
diff --git a/dns/dhisd/files/patch-README b/dns/dhisd/files/patch-README
new file mode 100644
index 000000000000..2a7fed26476c
--- /dev/null
+++ b/dns/dhisd/files/patch-README
@@ -0,0 +1,30 @@
+--- README.orig	Sun Apr 30 18:51:47 2000
++++ README	Mon Feb 26 00:55:38 2001
+@@ -29,7 +29,8 @@
+ 	would result in non-existent host. Thus, the presence of 
+ 	an IP address, even while offline, is essencial. 
+ 
+-	The DHIS server dhisd runs a database file (/etc/dhis/db/dhis.db)
++	The DHIS server dhisd runs a database file 
++        (__PREFIX__/db/dhis.db)
+ 	and loads the current list of dynamic hosts into memory. 
+ 	Furthermore it expects datagram packets to be received on
+ 	port 58800 from the connecting clients running dhid.
+@@ -91,7 +92,7 @@
+ 	dhisd accepts HUP and TERM signals. A kill -HUP will
+ 	make it reload the hosts database and kill -TERM
+ 	will terminate it. Its pid number is recorded on the
+-	text file /etc/dhis/pid/dhisd.pid.
++	text file __PREFIX__/pid/dhisd.pid.
+ 
+ 	The current DHIS server is expected to perform well
+ 	on a 100Mhz machine with up to 5000 dynamic hosts.
+@@ -99,7 +100,7 @@
+ 	users.
+ 
+ 	dhisd logs online and offline transitions at
+-	/etc/dhis/log/dhisd.log
++	__PREFIX__/log/dhisd.log
+ 
+ 
+ 	Firewall considerations:
diff --git a/dns/dhisd/files/patch-dhisd.h b/dns/dhisd/files/patch-dhisd.h
new file mode 100644
index 000000000000..6280c561a479
--- /dev/null
+++ b/dns/dhisd/files/patch-dhisd.h
@@ -0,0 +1,15 @@
+--- dhisd.h.orig	Mon Mar 13 18:08:04 2000
++++ dhisd.h	Mon Feb 26 01:03:00 2001
+@@ -62,9 +62,9 @@
+ 
+ #define	MX_PORT		58801
+ #define	DHISD_PORT	58800
+-#define	DHISD_PID	"/etc/dhis/pid/dhisd.pid"
+-#define	DHISD_DB	"/etc/dhis/db/dhis.db"
+-#define	DHISD_LOG	"/etc/dhis/log/dhisd.log"
++#define	DHISD_PID	"__PREFIX__/pid/dhisd.pid"
++#define	DHISD_DB	"__PREFIX__/db/dhis.db"
++#define	DHISD_LOG	"__PREFIX__/log/dhisd.log"
+ 
+ #define	MAX_HOSTNAME	64
+ #define	MAX_PASS	16
diff --git a/dns/dhisd/pkg-comment b/dns/dhisd/pkg-comment
new file mode 100644
index 000000000000..803dc7a57152
--- /dev/null
+++ b/dns/dhisd/pkg-comment
@@ -0,0 +1 @@
+DHIS server for updating dynamic DNS entries in DNS tables
diff --git a/dns/dhisd/pkg-descr b/dns/dhisd/pkg-descr
new file mode 100644
index 000000000000..521b0191cef0
--- /dev/null
+++ b/dns/dhisd/pkg-descr
@@ -0,0 +1,22 @@
+DHIS Daemon release 4.0
+==============================
+
+dhisd is the DHIS daemon. The deamon is used to update DNS tables on a 
+running unix based DNS server, running BIND 8.1.2 or higher. It's clients
+should run the dhis-client 3 or 4 software to send updates.
+
+You need a full DNS domain to run this server. You should at least have a 
+domain hosted for you with a primary and backup dns server and 1 
+backup mail-exchanger
+.
+If you don't know what this previous few lines where about, 
+you probably shouldn't try and run this software.
+
+For more information on the services of DHIS, you should look at the
+official DHIS site: 
+	http://www.dhis.org/dhis/services/
+
+For more info on the FreeBSD port, see 
+	http://bsltwr.dhis.org/dhis
+
+WWW: http://bsltwr.dhis.org/dhis/
diff --git a/dns/dhisd/pkg-plist b/dns/dhisd/pkg-plist
new file mode 100644
index 000000000000..8b137891791f
--- /dev/null
+++ b/dns/dhisd/pkg-plist
@@ -0,0 +1 @@
+