- Switch to a rc.d startup script.

- Remove obsolete USE_REINPLACE.

Approved by:	netchild

5 files changed, 64 insertions, 39 deletions

diff --git a/ftp/ftpd-tls/Makefile b/ftp/ftpd-tls/Makefile
index a5b9329c7db4..04b3c4d23c11 100644
--- a/ftp/ftpd-tls/Makefile
+++ b/ftp/ftpd-tls/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	ftpd-tls
 PORTVERSION=	20031008
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	ftp security
 MASTER_SITES=	ftp://ftp.zeist.de/pub/distfiles/
 
@@ -16,34 +16,30 @@ COMMENT=	Ftp server supporting FTP AUTH TLS
 
 GNU_CONFIGURE=	YES
 USE_OPENSSL=	YES
-USE_REINPLACE=	YES
+USE_RC_SUBR=	ftpd-tls.sh
 
 MAN8=		ftpd-tls.8
 
+CONFIGURE_ARGS=		--with-openssl-dir=${OPENSSLBASE}
+CONFIGURE_TARGET=	--build=${ARCH}-portbld-freebsd${OSREL}
+PKGMESSAGE=		${WRKDIR}/pkg-message
+
 .include <bsd.port.pre.mk>
 
 .if ${OSVERSION} < 400000
 BROKEN=		"Not supported on systems prior to FreeBSD 4.0 (missing getaddrinfo())"
 .endif
 
-CONFIGURE_ARGS=		--with-openssl-dir=${OPENSSLBASE}
-CONFIGURE_TARGET=	--build=${ARCH}-portbld-freebsd${OSREL}
-PKGMESSAGE=		${WRKDIR}/pkg-message
-
 post-patch:
 .for i in README.TLS ftpd.8.TLS pathnames.h tlsutil.c
 	@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/${i}
 .endfor
 	@${SED} 's|%%PREFIX%%|${PREFIX}|g; s|%%DOCSDIR%%|${DOCSDIR}|g' \
 		${PKGDIR}/pkg-message > ${WRKDIR}/pkg-message
-	@${SED} 's|%%PREFIX%%|${PREFIX}|g' ${FILESDIR}/ftpd-tls.sh > \
-		${WRKDIR}/ftpd-tls.sh
 
 do-install:
 	@${INSTALL_PROGRAM} ${WRKSRC}/ftpd ${PREFIX}/libexec/ftpd-tls
 	@${INSTALL_MAN} ${WRKSRC}/ftpd.8.TLS ${PREFIX}/man/man8/ftpd-tls.8
-	@${INSTALL_SCRIPT} ${WRKDIR}/ftpd-tls.sh \
-		${PREFIX}/etc/rc.d/ftpd-tls.sh.sample
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 .for i in README.TLS draft-murray-auth-ftp-ssl-09.txt
@@ -58,6 +54,10 @@ do-install:
 	@${INSTALL_DATA} /etc/ftpusers ${PREFIX}/etc/ftpd-tls
 .endif
 
+pre-install:
+# Make sure there's no startup script left over from a previous installation.
+	@${RM} -f ${PREFIX}/etc/rc.d/ftpd-tls.sh
+
 post-install:
 	@${CAT} ${WRKDIR}/pkg-message
 
diff --git a/ftp/ftpd-tls/files/ftpd-tls.sh b/ftp/ftpd-tls/files/ftpd-tls.sh
deleted file mode 100644
index 9b9eb473d480..000000000000
--- a/ftp/ftpd-tls/files/ftpd-tls.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-
-case "$1" in
-start)
-	if [ -x %%PREFIX%%/libexec/ftpd-tls ]; then
-		%%PREFIX%%/libexec/ftpd-tls -DUl > /dev/null
-		echo -n ' ftpd-tls'
-	fi
-	;;
-stop)
-	if [ -r /var/run/ftpd-tls.pid ]; then
-		kill -TERM `cat /var/run/ftpd-tls.pid`
-		rm -f /var/run/ftpd-tls.pid
-		echo -n ' ftpd-tls'
-	fi
-	;;
-*)
-	echo "Usage: `basename $0` {start|stop}" >&2
-	;;
-esac
-
-exit 0
diff --git a/ftp/ftpd-tls/files/ftpd-tls.sh.in b/ftp/ftpd-tls/files/ftpd-tls.sh.in
new file mode 100644
index 000000000000..5e9bfe5bc562
--- /dev/null
+++ b/ftp/ftpd-tls/files/ftpd-tls.sh.in
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: ftpd-tls
+# REQUIRE: LOGIN
+#
+# Available configuration variables for ftpd-tls are:
+#
+# ftpd_tls_enable (bool):	Set to "YES" to enable ftpd-tls.
+#				Defaults to "NO".
+# ftpd_tls_flags (flags):	Extra flags to ftpd-tls (see ftpd-tls(8)).
+#				Defaults to "-U -l".
+#
+# Add at least the following line to /etc/rc.conf or /etc/rc.conf.local to
+# enable ftpd-tls:
+#
+# ftpd_tls_enable="YES"
+#
+
+. %%RC_SUBR%%
+
+name="ftpd_tls"
+rcvar=${name}_enable
+
+command=%%PREFIX%%/libexec/ftpd-tls
+command_args="> /dev/null"
+start_precmd="ftpd_tls_precmd"
+pidfile="/var/run/ftpd-tls.pid"
+
+ftpd_tls_precmd()
+{
+	rc_flags="${rc_flags} -D"
+}
+
+load_rc_config $name
+
+: ${ftpd_tls_enable="NO"}
+: ${ftpd_tls_flags="-U -l"}
+
+run_rc_command "$1"
diff --git a/ftp/ftpd-tls/pkg-message b/ftp/ftpd-tls/pkg-message
index 5d443d4c7fbd..3be1d01ab658 100644
--- a/ftp/ftpd-tls/pkg-message
+++ b/ftp/ftpd-tls/pkg-message
@@ -1,11 +1,17 @@
 ===========================================================================
 
-Depending on how you would like to start ftpd-tls(8) either copy the
-sample start-up script %%PREFIX%%/etc/rc.d/ftpd-tls.sh.sample to
-%%PREFIX%%/etc/rc.d/ftpd-tls.sh or add the following two entries to
-your /etc/inetd.conf:
-ftp stream tcp  nowait root %%PREFIX%%/libexec/ftpd-tls ftpd-tls -Ul
-ftp stream tcp6 nowait root %%PREFIX%%/libexec/ftpd-tls ftpd-tls -Ul
+Depending on how you would like to start ftpd-tls(8) you have two choices:
+1) Add the following line to /etc/rc.conf or /etc/rc.conf.local:
+
+ftpd_tls_enable="YES"
+
+For further available configuration variables when using this method see
+%%PREFIX%%/etc/rc.d/ftpd-tls{,.sh}.
+
+2) Add the following entries to your /etc/inetd.conf:
+
+ftp stream tcp  nowait root %%PREFIX%%/libexec/ftpd-tls ftpd-tls -U -l
+ftp stream tcp6 nowait root %%PREFIX%%/libexec/ftpd-tls ftpd-tls -U -l
 
 See %%DOCSDIR%%/README.TLS and the openssl(1) manual
 page for further information on how to generate the certificates and
diff --git a/ftp/ftpd-tls/pkg-plist b/ftp/ftpd-tls/pkg-plist
index 82d69185471a..9e5cd11270d5 100644
--- a/ftp/ftpd-tls/pkg-plist
+++ b/ftp/ftpd-tls/pkg-plist
@@ -1,4 +1,3 @@
-etc/rc.d/ftpd-tls.sh.sample
 libexec/ftpd-tls
 %%PORTDOCS%%%%DOCSDIR%%/README.TLS
 %%PORTDOCS%%%%DOCSDIR%%/draft-murray-auth-ftp-ssl-09.txt