Upgrade to the latest CVS snapshot and remove CVS hack.

The driver is now in the pre-release stage, with first stable release scheduled
within the one month or even less, so please test it hard and report bugs into
utah's mailing list (see pkg/MESSAGE for details). Happy rendering!

10 files changed, 192 insertions, 388 deletions

diff --git a/graphics/utah-glx/Makefile b/graphics/utah-glx/Makefile
index 0e0b70ee25cb..afe9885623ed 100644
--- a/graphics/utah-glx/Makefile
+++ b/graphics/utah-glx/Makefile
@@ -1,334 +1,66 @@
-# New ports collection makefile for:	GLX
-# Version required:     CVS
-# Date created:         13 September 1999
-# Whom:                 Marc E E van Woerkom  <van.woerkom@netcologne.de>
+# New ports collection makefile for:	utah-glx
+# Date created:         		13 September 1999
+# Whom:                 		Marc E E van Woerkom  <van.woerkom@netcologne.de>
 #
 # $FreeBSD$
 #
-#
-# Notes:
-#
-#  . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)!
-#    This port is set up for 3.3.5
-#
-#  . Mesa-3.0 has to be uninstalled before this port builds!
-#    Why? Because we need to create a glx aware version.
-#
-#  . This stuff has been tested with
-#    - a Diamond Viper 330 (RIVA 128),
-#    - a Diamond Viper 550 (RIVA TNT),
-#    - and was reported to work with a Matrox G200 card
-#
-#  . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now
-#    so I rolled my own snapshot of the open project glx code.
-#    It is slightly outdated but will be updated soon.
-#
-#  . The current Mesa3 port for FreeBSD does not stop at the 'patch'
-#    target, but will instead try to build X11 immediatley if XFree86
-#    is not present.
-#    For this version (XFree86 3.3.5 needs no patches for glx yet) we
-#    ignore this wrong behaviour.
-#
-#  . We need tclsh for building - the choice for tclsh 8.0 is due to
-#    lack of time to include a proper selection scheme
-#
-#  . You can set CHIPSET_3D appropriately in /etc/make.conf if the
-#    question bugs you
-#
 
-PORTNAME=	glx
-PORTVERSION=	990802
+PORTNAME=	utah-glx
+PORTVERSION=	0.9.1
 CATEGORIES=	graphics
-MASTER_SITES=	http://people.FreeBSD.org/~3d/distfiles/glx/XF3.3.5/
-DISTFILES=	${DISTNAME}.tar.bz2 \
-	 	riva-x-glx.faq.bz2 \
-		Mesa-3_0.diff.bz2
-
-MAINTAINER=	3d@freebsd.org
+MASTER_SITES=	http://people.FreeBSD.org/~sobomax/
 
-# search for tclsh, if not present build it
-BUILD_DEPENDS=	tclsh8.0:${PORTSDIR}/lang/tcl80
+MAINTAINER=	3d@FreeBSD.org
 
-# These settings are here to make future updates to this port easier
-#PATCH_XFREE=	yes
-PATCH_MESA=	yes
-
-.if defined(PATCH_XFREE)
-BUILD_DEPENDS= 	/nonexistent:${PORTSDIR}/x11/XFree86:patch
-.endif
-.if defined(PATCH_MESA)
-BUILD_DEPENDS= 	/nonexistent:${PORTSDIR}/graphics/Mesa3:patch
-.endif
+BUILD_DEPENDS=	tclsh8.2:${PORTSDIR}/lang/tcl82 \
+		autoconf:${PORTSDIR}/devel/autoconf \
+		nonexistent:${PORTSDIR}/graphics/Mesa3:patch
 
+USE_X_PREFIX=	yes
+USE_GMAKE=	yes
 USE_BZIP2=	yes
-
-EXTRACT_ONLY=	${DISTNAME}.tar.bz2
-
-DIST_SUBDIR=	glx
-
-WRKSRC=		${WRKDIR}/${DISTNAME}
-
-# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX
-#USE_X_PREFIX=	yes
-PREFIX=		${X11BASE}
-
-XFCONFIG=	/etc/XF86Config
-
-XFREEVER=	3.3.5
-XFREEDIR=	${PORTSDIR}/x11/XFree86/work/xc
-
-MESAVER=	3.0
-MESADIR=	${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0
-
-# As we ask for CHIPSET_3D if not set
-IS_INTERACTIVE=	YES
-
-# comment out the following line,
-# if you want to build with Imake (Linux/alpha favours that)
-USE_AUTOCONF=	yes
 GNU_CONFIGURE=	yes
 
-# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards
-.if defined(CHIPSET_3D)
-.if ${CHIPSET_3D} == RIVA
-CONFIGURE_ARGS=	--with-chipset=tnt
-.endif
-.if ${CHIPSET_3D} == MGA
-CONFIGURE_ARGS=	--with-chipset=mga
-.endif
-.endif
-
-CONFIGURE_ARGS+= --with-mesa=${MESADIR} \
-		--with-mesa-version=mesa30 \
-		# --with-mmx-asm --with-3dnow-asm
-
-USE_GMAKE=	yes
-
-.if !defined(GNU_CONFIGURE)
-USE_IMAKE= 	yes
-.endif
+GLVER?=		14
+GLUTVER?=	3
 
-.include <bsd.port.pre.mk>
+CONFIGURE_SCRIPT=autogen.sh
+CONFIGURE_ARGS=	--enable-extra \
+		--with-mesa=${PORTSDIR}/graphics/Mesa3/work/Mesa-3.2 \
+		--sysconfdir=${PREFIX}/etc \
+		--with-moduledir=${PREFIX}/lib/modules
+CONFIGURE_ENV=	TCLSH="tclsh8.2"
+MAKE_ENV=	GLVER="${GLVER}" GLUTVER="${GLUTVER}"
+PLIST_SUB=	GLVER="${GLVER}" GLUTVER="${GLUTVER}"
 
-#
-#  before 'patch'
-#
-#  . apply some patches to the Mesa 3.0 distribution
-#
-pre-patch:
-.if defined(PATCH_XFREE)
-	@${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .."
-	cd ${XFREEDIR}; \
-	${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff
-.endif
-.if defined(PATCH_MESA)
-	@${ECHO} "=> Checking Mesa-${MESAVER} installation .."
-	@if \
-	  pkg_info -e "Mesa-${MESAVER}"; \
-	then \
-	  ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \
-	  ${ECHO} "Aborting.."; \
-	  ${FALSE} ; \
-	fi
-.if exists(${MESADIR}/../.glxpatch_done)
-	@${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .."
-.else
-	@${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .."
-	@${ECHO} "(ignore the rejections, as they should happen in comments only)"
-	-cd ${MESADIR}; \
-	bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f
-	${TOUCH} ${MESADIR}/../.glxpatch_done
-.endif
+.if defined(DEBUG)
+CFLAGS+=	-g
+CONFIGURE_ARGS+=--enable-debug
 .endif
 
-#
-#  before 'configure'
-#
-#  . patch glx configure.in, libGL/Makefile.in,
-#    serverglx/Makefile.in (yes, this is an ugly hack)
-#
-pre-configure:
-.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA
-	@${ECHO}
-	@${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use
-	@${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card,
-	@${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter
-	@${FALSE}
-.endif
-.if defined(GNU_CONFIGURE)
-	@${ECHO} "=> Adjusting ${WRKSRC}/configure.in .."
-	@cd ${WRKSRC}; \
-	${SED} -e 's;tclsh;tclsh8\.0;g' \
-	<configure.in >configure.in.new; \
-	${MV} configure.in.new configure.in
-	@${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .."
-	@cd ${WRKSRC}/libGL; \
-	${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \
-	<Makefile.in >Makefile.in.new; \
-	${MV} Makefile.in.new Makefile.in
-	@${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .."
-	@cd ${WRKSRC}/servGL/serverglx; \
-	${SED} -e 's;tclsh;tclsh8\.0;g' \
-	<Makefile.in >Makefile.in.new; \
-	${MV} Makefile.in.new Makefile.in
-.endif
+ALL_TARGET=	depend all
 
-#
-#  after 'configure'
-#
-#  . only for the old IMAKE style configuration
-#
-post-configure:
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "Using IMAKE"
-	@${ECHO} "=> Adjusting ${WRKSRC}/Config .."
-	@cd ${WRKSRC}; \
-	${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \
-	       -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \
-	<Config.in >Config;
-	@${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .."
-	@cd ${WRKSRC}/libGL; \
-	${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
-	${MV} Imakefile.new Imakefile
-	@${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .."
-	@cd ${WRKSRC}/servGL/serverglx; \
-	${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
-	${MV} Imakefile.new Imakefile
-.endif
+.include <bsd.port.pre.mk>
 
-#
-#  before 'build':
-#
-#  . build a glx aware Mesa lib
-#  . create makefiles (old IMAKE style configuration)
-#
-pre-build:
-.if defined(PATCH_XFREE)
-	@${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .."
-	cd ${XFREEDIR}/../..; \
-	${MAKE} all install
-.endif
-.if defined(PATCH_MESA)
-	@${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .."
-	cd ${MESADIR}/../..; \
-	${MAKE} all install
-.endif
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "=> Creating makefiles .."
-	cd ${WRKSRC}; \
-	${XMKMF}; \
-	${MAKE} Makefile; \
-	${MAKE} Makefiles
-.endif
+post-extract:
+	@${ECHO_MSG}
+	@${ECHO_MSG} "WARNING: This port will only work with XFree86 3.3 series of X-servers."
+	@${ECHO_MSG} "         Users of XFree86 4.0 and above should use DRI instead."
+	@${ECHO_MSG}
 
-#
-#  before 'install':
-#
-#  . check for proper installed XFree86 version (3.3.4 or higher)
-#  . check for glx installation (please deinstall)
-#  . check for Mesa 3.0 installtion (please deinstall)
-#
 pre-install:
-	@${ECHO} "=> Checking XFree86 installation .."
-	@if \
-	  pkg_info -e "XFree86-3.3.4"; \
-	then \
-	  ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.5"; \
-	then \
-	  ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.6"; \
-	then \
-	  ${ECHO} "Found XFree86 3.3.6 - this port should work"; \
-	elif \
-	  pkg_info -e "XFree86-3.3.3.1"; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \
-	  ${ECHO} "has been patched for use with glx!"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "(We continue with fingers crossed)"; \
-	  ${ECHO} ""; \
-	else \
-	  ${ECHO} ""; \
-	  ${ECHO} "This port depends on having a proper version of XFree86"; \
-	  ${ECHO} "installed - preferably ${XFREEVER}!"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "Aborting.."; \
-	  ${FALSE} ; \
-	fi
+.if exists(${PREFIX}/lib/libGL.so.${GLVER}) && !defined(GL_CHECK_OVERRIDE)
+	@${ECHO_MSG}
+	@${ECHO_MSG} "ERROR: It seems that another GL implementation currently installed in"
+	@${ECHO_MSG} "       ${PREFIX}/lib/libGL.so.${GLVER}"
+	@${ECHO_MSG}
+	@${ECHO_MSG} "       You have to deinstall it prior to Utah-Glx installation."
+	@${ECHO_MSG}
+	@false
+.endif
 
-#
-#  after 'install':
-#
-#  . install some docs
-#  . move old Mesa lib away (old IMAKE style configuration)
-#  . check XFree86 configuration file for colordepth (RIVA only)
-#  . check XFree86 configuration file for glx module
-#  . give some hints
-#
 post-install:
-.if !defined(NOPORTDOCS)
-	@${ECHO} "=> Installing documentation .."
-	${MKDIR} ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx
-	${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx
-
-.endif
-.if !defined(GNU_CONFIGURE)
-	@${ECHO} "=> Adjusting links .."
-	-${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old
-	-${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old
-	-${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a
-	-${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14
-.endif
-.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA
-	@${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .."
-	@${ECHO} ""
-	@if \
-	  ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "Found something."; \
-	else \
-	  ${ECHO} "Nope, nothing found - please use"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "    DefaultColorDepth 16"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "or"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "    DefaultColorDepth 15"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \
-	fi
-.endif
-	@${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .."
-	@${ECHO} ""
-	@if \
-	  ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \
-	  ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \
-	  ${GREP} -B2 '^ *EndSection *$$' | \
-	  ${GREP} -A2 '^ *Section *"Module" *$$'; \
-	then \
-	  ${ECHO} ""; \
-	  ${ECHO} "Looks OK to me."; \
-	else \
-	  ${ECHO} "Nope, not found - please add"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "  Section \"Module\""; \
-	  ${ECHO} "  Load \"glx.so\""; \
-	  ${ECHO} "  EndSection"; \
-	  ${ECHO} ""; \
-	  ${ECHO} "to the end of your ${XFCONFIG} file!"; \
-	fi
-	@${ECHO} "=> Giving last advice .."
-	@${CAT} ${PKGDIR}/MESSAGE
+	${MKDIR} ${PREFIX}/share/doc/utah-glx
+	${INSTALL_MAN} ${WRKSRC}/docs/README.* ${PREFIX}/share/doc/utah-glx
 
 .include <bsd.port.post.mk>
diff --git a/graphics/utah-glx/distinfo b/graphics/utah-glx/distinfo
index 05f85047abac..3a7fae321dd8 100644
--- a/graphics/utah-glx/distinfo
+++ b/graphics/utah-glx/distinfo
@@ -1,3 +1 @@
-MD5 (glx/glx-990802.tar.bz2) = 5b04e03339dfffca73b6a11ce64cd59e
-MD5 (glx/riva-x-glx.faq.bz2) = 6c5b499db143f071c6f69ba6c43db4c4
-MD5 (glx/Mesa-3_0.diff.bz2) = 5631bc2d7a54c366e072a72e45fca6c7
+MD5 (utah-glx-0.9.1.tar.bz2) = 2d1379f6cc7a3b803df452ca189fd8a6
diff --git a/graphics/utah-glx/files/patch-ab b/graphics/utah-glx/files/patch-ab
new file mode 100644
index 000000000000..053b3c568792
--- /dev/null
+++ b/graphics/utah-glx/files/patch-ab
@@ -0,0 +1,39 @@
+--- libGLU/Makefile.in.orig	Thu Dec 16 05:30:13 1999
++++ libGLU/Makefile.in	Fri Dec 31 04:19:58 1999
+@@ -13,10 +13,10 @@
+ # These define the name/version of the shared library we're building
+ # ------------------------------------------------------------------
+ LIBNAME = GLU
+-GLUREV_major = 1
+-GLUREV_minor = 2
+-GLUREV_micro = 0
+-SOGLUREV = ${GLUREV_major}.${GLUREV_minor}.${GLUREV_micro}
++GLUREV_major = ${GLVER}
++GLUREV_minor = 
++GLUREV_micro = 
++SOGLUREV = ${GLUREV_major}
+ GLULIB = lib${LIBNAME}.so.${SOGLUREV}
+ 
+ # FIXME: different library version for Mesa 3.2?
+@@ -104,8 +104,8 @@
+ 	@if [ -d ${INSTALL_libdir} ]; then set +x; \
+ 	else (set -x; ${MKDIR} ${INSTALL_libdir}); fi
+ 	${INSTALL} ${INSTALLFLAGS} ${INSTBINFLAGS} ${GLULIB} ${INSTALL_libdir}
+-	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUREV_major} ;\
+-	${LN} ${GLULIB} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUREV_major}
++#	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUREV_major} ;\
++#	${LN} ${GLULIB} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUREV_major}
+ 	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so ;\
+ 	${LN} ${GLULIB} ${INSTALL_libdir}/lib${LIBNAME}.so
+ else
+@@ -128,8 +128,8 @@
+ 	${CC} -o ./$@~ ${SHARED_LDFLAGS} -Wl,-soname,lib${LIBNAME}.so.${GLUREV_major} ${OBJS} ${MATHLIBS}
+ 	${RM} $@
+ 	${MV} $@~ $@
+-	${RM} lib${LIBNAME}.so.${GLUREV_major}
+-	${LN} $@ lib${LIBNAME}.so.${GLUREV_major}
++#	${RM} lib${LIBNAME}.so.${GLUREV_major}
++#	${LN} $@ lib${LIBNAME}.so.${GLUREV_major}
+ 	${RM} lib${LIBNAME}.so
+ 	${LN} $@ lib${LIBNAME}.so
+ 
diff --git a/graphics/utah-glx/files/patch-ac b/graphics/utah-glx/files/patch-ac
new file mode 100644
index 000000000000..167b606cea59
--- /dev/null
+++ b/graphics/utah-glx/files/patch-ac
@@ -0,0 +1,37 @@
+--- libglut/Makefile.in.orig	Thu Dec 16 05:30:14 1999
++++ libglut/Makefile.in	Fri Dec 31 04:34:53 1999
+@@ -13,9 +13,9 @@
+ # These define the name/version of the shared library we're building
+ # ------------------------------------------------------------------
+ LIBNAME = glut
+-GLUTREV_major = 3
+-GLUTREV_minor = 7
+-SOGLUTREV = ${GLUTREV_major}.${GLUTREV_minor}
++GLUTREV_major = ${GLUTVER}
++GLUTREV_minor = 
++SOGLUTREV = ${GLUTREV_major}${GLUTREV_minor}
+ GLUTLIB = lib${LIBNAME}.so.${SOGLUTREV}
+ 
+ # Source and Object definitions
+@@ -113,8 +113,8 @@
+ 	@if [ -d ${INSTALL_libdir} ]; then set +x; \
+ 	else (set -x; ${MKDIR} ${INSTALL_libdir}); fi
+ 	${INSTALL} ${INSTALLFLAGS} ${INSTBINFLAGS} ${GLUTLIB} ${INSTALL_libdir}
+-	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUTREV_major} ;\
+-	${LN} ${GLUTLIB} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUTREV_major}
++#	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUTREV_major} ;\
++#	${LN} ${GLUTLIB} ${INSTALL_libdir}/lib${LIBNAME}.so.${GLUTREV_major}
+ 	${RM} ${INSTALL_libdir}/lib${LIBNAME}.so ;\
+ 	${LN} ${GLUTLIB} ${INSTALL_libdir}/lib${LIBNAME}.so
+ else
+@@ -139,8 +139,8 @@
+ 	${CC} -o ./$@~ ${SHARED_LDFLAGS} -Wl,-soname,lib${LIBNAME}.so.${GLUTREV_major} ${OBJS} ${MATHLIBS}
+ 	${RM} $@
+ 	${MV} $@~ $@
+-	${RM} lib${LIBNAME}.so.${GLUTREV_major}
+-	${LN} $@ lib${LIBNAME}.so.${GLUTREV_major}
++#	${RM} lib${LIBNAME}.so.${GLUTREV_major}
++#	${LN} $@ lib${LIBNAME}.so.${GLUTREV_major}
+ 	${RM} lib${LIBNAME}.so
+ 	${LN} $@ lib${LIBNAME}.so
+ 
diff --git a/graphics/utah-glx/files/patch-ad b/graphics/utah-glx/files/patch-ad
new file mode 100644
index 000000000000..ad3787fbb2e2
--- /dev/null
+++ b/graphics/utah-glx/files/patch-ad
@@ -0,0 +1,12 @@
+--- Makefile.in.orig	Wed Mar 22 22:25:54 2000
++++ Makefile.in	Fri Apr 28 03:51:47 2000
+@@ -40,7 +40,8 @@
+ 		( cd $$i && ${MAKE} $@ ) || exit 1; \
+ 	done
+ 	test -s ${sysconfdir}/glx.conf || \
+-		${INSTALL} -m 644 glx.conf ${sysconfdir}/glx.conf
++		${INSTALL} -c -m 644 glx.conf ${sysconfdir}/glx.conf
++	${INSTALL} -c -m 644 glx.conf ${sysconfdir}/glx.conf.default
+ 
+ real-clean:
+ 	${RM} config.status
diff --git a/graphics/utah-glx/files/patch-ae b/graphics/utah-glx/files/patch-ae
new file mode 100644
index 000000000000..cc4603b35a43
--- /dev/null
+++ b/graphics/utah-glx/files/patch-ae
@@ -0,0 +1,20 @@
+--- libGL/Makefile.in.orig	Mon Feb 28 20:57:28 2000
++++ libGL/Makefile.in	Mon Feb 28 21:09:30 2000
+@@ -14,7 +14,7 @@
+ # These define the name/version of the shared library we're building
+ # ------------------------------------------------------------------
+ LIBNAME = GL
+-SOGLREV = 1.0
++SOGLREV = ${GLVER}
+ 
+ # Source and Object files
+ # -----------------------
+@@ -111,7 +111,7 @@
+ 
+ lib${LIBNAME}.so.${SOGLREV} : render.c ${OBJS}
+ 	${RM} $@~
+-	@SONAME=`echo $@ | sed 's/\.[^\.]*$$//'`; set -x; \
++	@SONAME=`echo $@`; set -x; \
+ 	if [ `uname` = "SunOS" ] ; then \
+ 		${CC} -o ./$@~ ${SHARED_LDFLAGS} -Wl,-h,$$SONAME ${OBJS} \
+ 		${XLIBDIR} ${XLIBS} ${LIBS} ${MATHLIBS}; \
diff --git a/graphics/utah-glx/pkg-comment b/graphics/utah-glx/pkg-comment
index 2183297aafc6..59e513ac5ae9 100644
--- a/graphics/utah-glx/pkg-comment
+++ b/graphics/utah-glx/pkg-comment
@@ -1 +1 @@
-Hardware accelerated OpenGL 3d graphics (RIVA & G200/G400)
+Utah-GLX is a hardware OpenGL support for XFree86 X-Servers
diff --git a/graphics/utah-glx/pkg-descr b/graphics/utah-glx/pkg-descr
index 503b87841c9d..882c1a11bc0b 100644
--- a/graphics/utah-glx/pkg-descr
+++ b/graphics/utah-glx/pkg-descr
@@ -1,21 +1,15 @@
-OpenGL hardware acceleration for RIVA based cards and Matrox G200.
+Utah-GLX is a hardware OpenGL support for XFree86 X-Servers.
 
-To bridge the time until the XFree86-4 release, this port will build a  
-Mesa 3.0 Graphics Library that makes use of the 3d hardware acceleration
-features of nvidia's RIVA 128/128ZX and RIVA TNT/TNT2/VANTAGE based 
-graphics cards and the Matrox G200/G400.
+Currently supported hardware:
+ o Matrox MGA-G200, MGA-G400
+ o ATI RagePro (Mach64)
+ o Intel i810
+ o NVIDIA Riva series
+ o SiS 6326
+ o S3 Virge
 
-WARNING:
+Please note that some of the videocards above (e.g. i810) require kernel
+support, which at the time of this writting (May 2000) is not implemented for
+FreeBSD yet, so it may or may not work for your particular h/w.
 
-Please note that this build might need a considerable amount of time.
-(AMD K6/300MHz/196MB/SCSI: XFree86 3 hours, Mesa 1/2 hour, glx 10 min)
-
-See Jordan K Hubbard's article in the July '99 issue of
-
-    http://www.freebsdzine.org 
-
-for more information or visit
-
-WWW: http://people.FreeBSD.org/~3d
-
-Marc E E van Woerkom  <3d@freebsd.org>
+WWW: http://utah-glx.sourceforge.net/
diff --git a/graphics/utah-glx/pkg-message b/graphics/utah-glx/pkg-message
index 261d44c9e218..7d02c0f8eef9 100644
--- a/graphics/utah-glx/pkg-message
+++ b/graphics/utah-glx/pkg-message
@@ -1,29 +1,12 @@
-
-Additional Notes:
------------------
-
-If you built an SVGA server with 3d hardware acceleration for a nvidia card 
-(RIVA 128, TNT, TNT2, TNT2 Ultra ..) please check that
-
-- you changed the default colour depth to 16 or 15 in your /etc/XF86Config 
-  file (keyword: DefaultColorDepth) plus 
-
-and (this holds for Matrox G200/G400 too) check if
-
-- you added to /etc/XF86Config (outside of any other section) the
-  following 3 lines:
-
-      Section "Module"
-      Load "glx.so"
-      EndSection
-
-- you enabled System V shared memory support in your kernel
-
-
-Things you might want to do:
-
-. Try out ports/x11/xscreensaver (e.g. superquadrics) as an sample OpenGL 
-  application,
-. read the article or 
-. have a look at the docs in X11/share/doc/riva-glx, esp the FAQ or
-. visit http://people.FreeBSD.org/~3d
+--------------------------------------------------------------------------------
+ NOTE: This software currently is "work in progress" and while it may work for
+       your particular hardware (for example it is known to work quite reliably
+       on Mach64), but it may have problems with some other supported h/w.
+       Therefore we are encouraging all testers to report problems with this
+       drivers to the official Utah-glx developers' mailing list.
+
+       If you found any bugs or incompatibilities with some particular
+       hardware configuration please fill the bug report and send it to the
+       <utah-glx-dev@lists.sourceforge.net> address, which is the mailing list
+       for Utah-glx.
+--------------------------------------------------------------------------------
diff --git a/graphics/utah-glx/pkg-plist b/graphics/utah-glx/pkg-plist
index 4ac032ed9a38..16e5c3f94242 100644
--- a/graphics/utah-glx/pkg-plist
+++ b/graphics/utah-glx/pkg-plist
@@ -1,31 +1,20 @@
-include/GL/GLXproto.h
-include/GL/dosmesa.h
-include/GL/foomesa.h
-include/GL/fxmesa.h
-include/GL/ggimesa.h
+etc/glx.conf.default
 include/GL/gl.h
-include/GL/gl_mangle.h
 include/GL/glu.h
-include/GL/glu_mangle.h
 include/GL/glut.h
+include/GL/glutf90.h
 include/GL/glx.h
-include/GL/glx_mangle.h
-include/GL/mglmesa.h
-include/GL/osmesa.h
-include/GL/osmesa3.h
-include/GL/svgamesa.h
-include/GL/wmesa.h
-include/GL/xmesa.h
-lib/libGL.a
-lib/libGL.so.1 
-lib/libMesaGL.a
-lib/libMesaGL.so.14
-lib/libMesaGLU.a
-lib/libMesaGLU.so.14
-lib/libglut.a
-lib/libglut.so.3
+lib/libGL.so
+lib/libGL.so.%%GLVER%%
+lib/libGLU.so
+lib/libGLU.so.%%GLVER%%
+lib/libglut.so
+lib/libglut.so.%%GLUTVER%%
 lib/modules/glx.so
-share/doc/riva-glx/README
-share/doc/riva-glx/riva-x-glx.faq.bz2
-share/doc/riva-glx/tested.html
-@dirrm share/doc/riva-glx
+share/doc/utah-glx/README.i810
+share/doc/utah-glx/README.mach64
+share/doc/utah-glx/README.mga
+share/doc/utah-glx/README.nv
+share/doc/utah-glx/README.s3virge
+@dirrm include/GL
+@dirrm share/doc/utah-glx