added and updated printer drivers.

PR:		ports/10498
Submitted by:	Maintainer = MITA Yoshio <mita@jp.FreeBSD.org>

5 files changed, 45 insertions, 45 deletions

diff --git a/japanese/vfghostscript55/Makefile b/japanese/vfghostscript55/Makefile
index 030ce68c6434..d3609e07b862 100644
--- a/japanese/vfghostscript55/Makefile
+++ b/japanese/vfghostscript55/Makefile
@@ -3,7 +3,7 @@
 # Date created:		26 Aug 1997
 # Whom:			Mita Yoshio <mita@jp.FreeBSD.org>
 #
-# $Id: Makefile,v 1.28 1998/12/23 18:51:31 steve Exp $
+# $Id: Makefile,v 1.29 1999/02/13 00:34:47 asami Exp $
 #
 
 DISTNAME=	ghostscript-5.50
@@ -23,7 +23,8 @@ MASTER_SITES=	ftp://ftp.cs.wisc.edu/ghost/aladdin/gs550/ \
 		http://www.rd.nacsis.ac.jp/~katayama/homepage/ghostscript/jpdf/ \
 		http://itohws03.ee.noda.sut.ac.jp/~matsuda/VFlib-FT/ \
 		http://www.ceres.dti.ne.jp/~owatanab/gdevnpdl/ \
-		ftp://ftp.humblesoft.com/pub/
+		ftp://ftp.humblesoft.com/pub/ \
+		http://www.necs.co.jp/~umi/
 DISTFILES=	${GS_SOURCES} ${GS_DRIVERS} ${GS_FONTS_STD} ${GS_FONTS_OTHER}
 
 MAINTAINER=	mita@jp.FreeBSD.org
@@ -33,8 +34,8 @@ LIB_DEPENDS=	VFlib2.24:${PORTSDIR}/japanese/vflib
 EXTRACT_ONLY=	ghostscript-5.50.tar.gz jpegsrc.v6b.tar.gz libpng-1.0.2.tar.gz
 WRKSRC=		${WRKDIR}/gs5.50
 MAKEFILE=	unix-gcc.mak
-#MAKE_FLAGS=	prefix=${PREFIX} zlibc_=-lz CFLAGS="${CFLAGS}" -f
-ALL_TARGET=
+#MAKE_FLAGS=	prefix=${PREFIX} CFLAGS="${CFLAGS}" -f
+ALL_TARGET=	
 MAN1=		gs.1 pdf2ps.1 ps2ascii.1 ps2epsi.1 ps2pdf.1 pdf2dsc.1 ps2ps.1
 
 USE_GMAKE=	yes
@@ -52,7 +53,8 @@ GS_DRIVERS+=	gdevrpdl.tar.gz
 GS_DRIVERS+=	gdev10v.tar.gz
 GS_DRIVERS+=	dmprt-2.01.tar.gz
 GS_DRIVERS+=	gdevnpdl-1.5.tar.gz
-GS_DRIVERS+=	epag-3.07.tar.gz
+GS_DRIVERS+=	epag-3.08.tar.gz
+GS_DRIVERS+=	gdevalps-0.1.tar.gz
 #  Note: the following two are real files that have symlinks with
 #  later version numbers pointing to them.  To avoid unnecessarily
 #  downloading distfiles, do not change these when upgrading the port
@@ -84,16 +86,18 @@ post-patch:
 	  ${MKDIR} ${PRINTER}/gdevdmpr ; \
 	  tar -C gdevdmpr -xzf ${DISTDIR}/dmprt-2.01.tar.gz ; \
 	  tar xzf ${DISTDIR}/gdevnpdl-1.5.tar.gz ; \
-	  tar xzf ${DISTDIR}/epag-3.07.tar.gz ; \
+	  tar xzf ${DISTDIR}/epag-3.08.tar.gz ; \
+	  tar xzf ${DISTDIR}/gdevalps-0.1.tar.gz ; \
 	  ${CP} gdev10v/gdev10v.c gdev10v/gdev10v.mak ${WRKSRC}; \
 	  ${CP} gdevmjc-0.7/gdevmjc.c gdevmjc-0.7/mjc.dev ${WRKSRC}; \
 	  ${CP} gdevlips-2.0.0/gdevlips.c gdevlips-2.0.0/gdevlips.mak ${WRKSRC}; \
 	  ${CP} gdevlips-2.0.0/gdevl4r.c gdevlips-2.0.0/gdevlips.h ${WRKSRC}; \
 	  ${CP} gdevdmpr/gdevdmpr.c gdevdmpr/gdevdmpr.mak ${WRKSRC}; \
 	  ${CP} gdevdmpr/dviprlib.c gdevdmpr/dviprlib.h   ${WRKSRC}; \
-	  ${CP} epag-3.07/gdevepag.c epag-3.07/gdevepag.mak ${WRKSRC}; \
+	  ${CP} epag-3.08/gdevepag.c epag-3.08/gdevepag.mak ${WRKSRC}; \
 	  ${CP} gdevrpdl/gdevrpdl.c gdevrpdl/gdevrpdl.mak ${WRKSRC}; \
 	  ${CP} gdevnpdl/gdevnpdl.c gdevnpdl/gdevnpdl.mak ${WRKSRC}; \
+	  ${CP} gdevalps/gdevalps.c gdevalps/gdevalps.mk ${WRKSRC}; \
 	  )
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdev10v.mak.patch
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/mjc.dev.patch
@@ -101,6 +105,7 @@ post-patch:
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevepag.mak.patch
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevnpdl.mak.patch
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevrpdl.mak.patch
+	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevalps.mak.patch
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevmjc.c.patch
 	@${PATCH} ${PATCH_ARGS} < ${FILESDIR}/gdevdmpr.patch
 	@${CAT} ${WRKSRC}/gdev10v.mak >> ${WRKSRC}/contrib.mak
@@ -110,9 +115,10 @@ post-patch:
 	@${CAT} ${WRKSRC}/gdevrpdl.mak >> ${WRKSRC}/contrib.mak
 	@${CAT} ${WRKSRC}/gdevnpdl.mak >> ${WRKSRC}/contrib.mak
 	@${CAT} ${WRKSRC}/mjc.dev >> ${WRKSRC}/contrib.mak
+	@${CAT} ${WRKSRC}/gdevalps.mk >> ${WRKSRC}/contrib.mak
 
 post-build:
-	@(cd ${PRINTER}/epag-3.07 ;  ${MAKE})
+	@(cd ${PRINTER}/epag-3.08 ;  ${MAKE})
 
 pre-install:
 	@${MKDIR} ${PREFIX}/share/ghostscript
@@ -120,7 +126,7 @@ pre-install:
 	@tar -C ${PREFIX}/share/ghostscript/fonts -xzf ${DISTDIR}/${GS_FONTS_OTHER}
 
 post-install:
-	${INSTALL_PROGRAM} ${PRINTER}/epag-3.07/ert ${PREFIX}/bin
+	${INSTALL_PROGRAM} ${PRINTER}/epag-3.08/ert ${PREFIX}/bin
 	@strip ${PREFIX}/bin/gs
 	@( \
 	  ${CP} ${WRKSRC}/gs5.50-vflib-1.0/README ${DOC_DIR}/README.gs5.10-vflib ; \
@@ -138,12 +144,12 @@ post-install:
 	  ${CP} ${PRINTER}/gdevdmpr/dmp_site.ps ${GSINST_DIR} ; \
 	  ${CP} ${PRINTER}/gdevdmpr/escp_24.src ${GSINST_DIR} ; \
 	  ${CP} ${PRINTER}/gdevdmpr/testpage.ps ${GSINST_DIR} ; \
-	  ${MKDIR} ${DOC_DIR}/epag-3.07 ; \
-	  ${CP} ${PRINTER}/epag-3.07/FILES ${DOC_DIR}/epag-3.07 ; \
-	  ${CP} ${PRINTER}/epag-3.07/*.txt ${DOC_DIR}/epag-3.07 ; \
-	  ${CP} ${PRINTER}/epag-3.07/adjust.ps ${DOC_DIR}/epag-3.07 ; \
-	  ${CP} ${PRINTER}/epag-3.07/gsepagif.sh ${DOC_DIR}/epag-3.07 ; \
-	  ${CP} ${PRINTER}/epag-3.07/psprint ${DOC_DIR}/epag-3.07 ; \
+	  ${MKDIR} ${DOC_DIR}/epag-3.08 ; \
+	  ${CP} ${PRINTER}/epag-3.08/FILES ${DOC_DIR}/epag-3.08 ; \
+	  ${CP} ${PRINTER}/epag-3.08/*.txt ${DOC_DIR}/epag-3.08 ; \
+	  ${CP} ${PRINTER}/epag-3.08/adjust.ps ${DOC_DIR}/epag-3.08 ; \
+	  ${CP} ${PRINTER}/epag-3.08/gsepagif.sh ${DOC_DIR}/epag-3.08 ; \
+	  ${CP} ${PRINTER}/epag-3.08/psprint ${DOC_DIR}/epag-3.08 ; \
 	)
 .if defined(PDFENCRYPT)
 	@${CP} -f ${DISTDIR}/pdf_sec.ps ${GSINST_DIR}
diff --git a/japanese/vfghostscript55/distinfo b/japanese/vfghostscript55/distinfo
index 4faf1d1ccb19..bcfaea63329a 100644
--- a/japanese/vfghostscript55/distinfo
+++ b/japanese/vfghostscript55/distinfo
@@ -8,6 +8,8 @@ MD5 (gdevrpdl.tar.gz) = 9606f3cca1a8f85be76944fa4eda09b7
 MD5 (gdev10v.tar.gz) = 1486bb54c214ce215044a6c606280d73
 MD5 (dmprt-2.01.tar.gz) = c7a9fb127fde5d888a798bf5e1822b88
 MD5 (gdevnpdl-1.5.tar.gz) = 8b1185b489c14c723f0fd0960fccffa0
-MD5 (epag-3.07.tar.gz) = 9f6232e89b89dd9257d0caae414b998b
+MD5 (epag-3.08.tar.gz) = e5e57176f55abc2c5224d405b5c402d1
+MD5 (gdevalps-0.1.tar.gz) = 67c9da9feae4e16938e43d5430cbd9c5
 MD5 (ghostscript-fonts-std-5.50.tar.gz) = 8462a429e2672d332a510da076dca6d2
 MD5 (ghostscript-fonts-other-5.50.tar.gz) = e3540578f33caf5dfc384e5518890f57
+MD5 (pdf_sec.ps) = 33b855032c90a0e0e6d5a460be82c749
diff --git a/japanese/vfghostscript55/files/gdevepag.mak.patch b/japanese/vfghostscript55/files/gdevepag.mak.patch
index a96350697643..884f8ddc9388 100644
--- a/japanese/vfghostscript55/files/gdevepag.mak.patch
+++ b/japanese/vfghostscript55/files/gdevepag.mak.patch
@@ -1,21 +1,12 @@
-*** gdevepag.mak.orig	Sun Nov 15 23:30:40 1998
---- gdevepag.mak	Sun Nov 15 23:40:28 1998
-***************
-*** 1,7 ****
-  ### ------- Epson ESC/Page printer device ----------------- ###
-  
-! epag_ = gdevepag.$(OBJ) gdevprn.$(OBJ)
-  
-! epag.dev: gdevepag.$(OBJ)
-! 	$(SETPDEV) epag gdevepag.$(OBJ)
-  
---- 1,9 ----
-  ### ------- Epson ESC/Page printer device ----------------- ###
-  
-! epag_ = $(GLOBJ)gdevepag.$(OBJ) $(GLOBJ)gdevprn.$(OBJ)
-! $(GLOBJ)gdevepag.$(OBJ): $(GLSRC)gdevepag.c $(PDEVH)
-! 	$(GLCC) $(GLO_)gdevepag.$(OBJ) $(C_) $(GLSRC)gdevepag.c
-  
-! epag.dev: $(epag_)
-! 	$(SETPDEV) epag $(epag_)
-  
+--- gdevepag.mak.orig	Tue Mar  9 09:45:25 1999
++++ gdevepag.mak	Tue Mar  9 09:51:22 1999
+@@ -1,6 +1,7 @@
+ ### ------- Epson ESC/Page printer device ----------------- ###
+-epag_ = gdevepag.$(OBJ)
+-gdevepag.$(OBJ): gdevepag.c $(PDEVH)
++epag_ = $(GLOBJ)gdevepag.$(OBJ) $(GLOBJ)gdevprn.$(OBJ)
++$(GLOBJ)gdevepag.$(OBJ): $(GLSRC)gdevepag.c $(PDEVH)
++	$(GLCC) $(GLO_)gdevepag.$(OBJ) $(C_) $(GLSRC)gdevepag.c
+ 
+ epag.dev: $(epag_) page.dev
+ 	$(SETPDEV) epag $(epag_)
diff --git a/japanese/vfghostscript55/pkg-plist b/japanese/vfghostscript55/pkg-plist
index 142efb87d631..8d44f6920522 100644
--- a/japanese/vfghostscript55/pkg-plist
+++ b/japanese/vfghostscript55/pkg-plist
@@ -109,12 +109,12 @@ share/ghostscript/5.50vflib/doc/gdevdmpr.sj
 share/ghostscript/5.50vflib/doc/gdevnpdl.jis
 share/ghostscript/5.50vflib/doc/gs_statd.dif
 share/ghostscript/5.50vflib/doc/gslipsif.sh
-share/ghostscript/5.50vflib/doc/epag-3.07/FILES
-share/ghostscript/5.50vflib/doc/epag-3.07/gdevepag.txt
-share/ghostscript/5.50vflib/doc/epag-3.07/ert.txt
-share/ghostscript/5.50vflib/doc/epag-3.07/adjust.ps
-share/ghostscript/5.50vflib/doc/epag-3.07/gsepagif.sh
-share/ghostscript/5.50vflib/doc/epag-3.07/psprint
+share/ghostscript/5.50vflib/doc/epag-3.08/FILES
+share/ghostscript/5.50vflib/doc/epag-3.08/gdevepag.txt
+share/ghostscript/5.50vflib/doc/epag-3.08/ert.txt
+share/ghostscript/5.50vflib/doc/epag-3.08/adjust.ps
+share/ghostscript/5.50vflib/doc/epag-3.08/gsepagif.sh
+share/ghostscript/5.50vflib/doc/epag-3.08/psprint
 share/ghostscript/5.50vflib/gs_btokn.ps
 share/ghostscript/5.50vflib/gs_ccfnt.ps
 share/ghostscript/5.50vflib/gs_cff.ps
@@ -399,7 +399,7 @@ share/ghostscript/fonts/fcyri.afm
 share/ghostscript/fonts/u003043t.afm
 share/ghostscript/fonts/u004006t.afm
 @dirrm share/ghostscript/fonts
-@dirrm share/ghostscript/5.50vflib/doc/epag-3.07
+@dirrm share/ghostscript/5.50vflib/doc/epag-3.08
 @dirrm share/ghostscript/5.50vflib/doc
 @dirrm share/ghostscript/5.50vflib/examples
 @dirrm share/ghostscript/5.50vflib/vflib
diff --git a/japanese/vfghostscript55/scripts/configure b/japanese/vfghostscript55/scripts/configure
index 10bcb9b2e857..f055a4d59b97 100644
--- a/japanese/vfghostscript55/scripts/configure
+++ b/japanese/vfghostscript55/scripts/configure
@@ -4,7 +4,7 @@
 
 if [ ! "X"${BATCH} = "X" ] ; then
 
-PRINTER_JAPAN=' epag.dev mjc180.dev mjc360.dev mjc720.dev mj500c.dev lips3.dev lips4.dev lips4c.dev rpdlA3.dev rpdlA4.dev rpdlB4.dev rpdlB5.dev bj10v.dev bj10vh.dev dmprt.dev npdl.dev'
+PRINTER_JAPAN=' epag.dev mjc180.dev mjc360.dev mjc720.dev mj500c.dev lips3.dev lips4.dev lips4c.dev rpdlA3.dev rpdlA4.dev rpdlB4.dev rpdlB5.dev bj10v.dev bj10vh.dev dmprt.dev npdl.dev alps.dev'
 
 sed -e "s;XINCLUDE=-I/usr/local/X/include;XINCLUDE=-I/usr/X11R6/include;" \
     -e "s;XLIBDIRS=-L/usr/X11/lib;XLIBDIRS=-L/usr/X11R6/lib;" \
@@ -74,6 +74,7 @@ Have fun with this new configuration style !     -andreas \n\n\
    "x11gray2" "X masquer. as device with 2-bit gray-scale device" ON \
    "x11gray4" "X masquer. as device with 4-bit gray-scale device" OFF \
    "x11mono"  "X masquer. as black-and-white device" ON \
+   "alps"     "ALPS MD5000 monochrome printer driver" ON \
    "appledmp" "Apple Dot Matrix Printer / Imagewriter" OFF \
    "iwhi"     "Apple Imagewriter, high-resolution mode" OFF \
    "iwlo"     "Apple Imagewriter, low-resolution mode" OFF \