Use an option to disable the Tk extension (WITH_TK). Don't use

libc_r if we're not building the thread module. Respect options
given in the environment.

The defaults (build with Tk and thread support) don't change.

3 files changed, 46 insertions, 8 deletions

diff --git a/lang/python+ipv6/Makefile b/lang/python+ipv6/Makefile
index 74dccf93bca3..387b83d84d3a 100644
--- a/lang/python+ipv6/Makefile
+++ b/lang/python+ipv6/Makefile
@@ -3,7 +3,7 @@
 # Date created:         08 August 1995
 # Whom:                 jkh
 #
-# $Id: Makefile,v 1.16 1997/08/06 06:40:27 tg Exp $
+# $Id: Makefile,v 1.17 1997/08/29 07:04:17 tg Exp $
 #
 
 DISTNAME=       python1.4
@@ -13,11 +13,11 @@ MASTER_SITES=	ftp://www.python.org/pub/python/src/ \
 		ftp://ftp.cwi.nl/pub/python/src/ \
 		ftp://www.python.org/pub/python/contrib/Graphics/Tkinter/ \
 		ftp://ftp.cwi.nl/pub/python/contrib/Graphics/Tkinter/
-DISTFILES=	${DISTNAME}${EXTRACT_SUFX} _tkinter1.4.c
+DISTFILES=	${DISTNAME}${EXTRACT_SUFX} ${TKINTER}
 
 MAINTAINER=	tg@FreeBSD.org
 
-LIB_DEPENDS=	tk80\\.1\\.:${PORTSDIR}/x11/tk80
+LIB_DEPENDS=	${TK_DEPENDS}
 
 EXTRACT_ONLY=	${DISTNAME}${EXTRACT_SUFX}
 WRKSRC=		${WRKDIR}/Python-1.4
@@ -28,22 +28,41 @@ INSTALL_TARGET=	install
 MAN1=		python.1
 
 #
+# The standard setup file
+#
+SETUP_FILE=	Setup
+
+#
+# Support for Tk is compiled in by default.
+#
+WITH_TK?=	yes
+.if defined(WITH_TK) && $(WITH_TK) == yes
+TK_DEPENDS=	tk80\\.1\\.:${PORTSDIR}/x11/tk80
+TKINTER=	_tkinter1.4.c
+SETUP_LOCAL+=	Setup.tk
+.endif
+
+#
 # If you want to use Python's thread module, you need to set WITH_THREADS
 # to 'yes', and you must have the FreeBSD threading c library (libc_r)
 # installed. See 'man 3 pthread' for details on libc_r.
 #
-WITH_THREADS=	yes
-SETUP_FILE=	Setup
+WITH_THREADS?=	yes
 .if exists(/usr/lib/libc_r.a) && defined(WITH_THREADS) && ${WITH_THREADS} == yes
 CONFIGURE_ARGS+=	--with-thread
-SETUP_FILE=	Setup.thread
+SETUP_LOCAL+=	Setup.thread
 .endif
 
 post-extract:
+.if defined(WITH_TK) && $(WITH_TK) == yes
 	${CP} ${DISTDIR}/_tkinter1.4.c ${WRKSRC}/Modules/_tkinter.c
+.endif
 
 post-configure:
 	${CP} ${FILESDIR}/${SETUP_FILE} ${WRKSRC}/Modules/Setup
+.for file in ${SETUP_LOCAL}
+	${CAT} ${FILESDIR}/${file} >> ${WRKSRC}/Modules/Setup.local
+.endfor
 
 post-install:
 	strip ${PREFIX}/bin/python
diff --git a/lang/python+ipv6/files/Setup b/lang/python+ipv6/files/Setup
index cab0cf57b1a5..6e6861c369e4 100644
--- a/lang/python+ipv6/files/Setup
+++ b/lang/python+ipv6/files/Setup
@@ -243,14 +243,14 @@ md5 md5module.c md5c.c
 # Change the -l arguments to use Tcl 7.4 and Tk 4.0!
 
 # *** ALWAYS enable this line:
-TKPATH=:$(DESTLIB)/tkinter
+#TKPATH=:$(DESTLIB)/tkinter
 
 # *** Enable *one* of the following lines:
 # For Solaris:
 #_tkinter _tkinter.c -I/usr/openwin/include -I/usr/local/include -L/usr/openwin/lib -L/usr/local/lib -ltk4.1 -ltcl7.5 -lX11
 # For generic system (may have to add -I/-L options to find X11):
 #_tkinter _tkinter.c -I/usr/local/include -L/usr/local/lib -ltk4.1 -ltcl7.5 -lX11
-_tkinter _tkinter.c -I${PREFIX}/include/tk8.0 -I${PREFIX}/include/tcl8.0 -I${X11BASE}/include -L${PREFIX}/lib -L${X11BASE}/lib -ltk80 -ltcl80 -lX11
+#_tkinter _tkinter.c -I${PREFIX}/include/tk8.0 -I${PREFIX}/include/tcl8.0 -I${X11BASE}/include -L${PREFIX}/lib -L${X11BASE}/lib -ltk80 -ltcl80 -lX11
 
 
 # Lance Ellinghaus's modules:
diff --git a/lang/python+ipv6/files/Setup.tk b/lang/python+ipv6/files/Setup.tk
new file mode 100644
index 000000000000..81869a2405de
--- /dev/null
+++ b/lang/python+ipv6/files/Setup.tk
@@ -0,0 +1,19 @@
+*shared*
+
+# The _tkinter module.
+#
+# See the section "The Tk interface" in ../README for more info.
+#
+# Enable the TKPATH line and choose the most applicable _tkinter line.
+# You may have to change /usr/local to wherever Tcl/Tk are installed.
+# Change the -l arguments to use Tcl 7.4 and Tk 4.0!
+
+# *** ALWAYS enable this line:
+TKPATH=:$(DESTLIB)/tkinter
+
+# *** Enable *one* of the following lines:
+# For Solaris:
+#_tkinter _tkinter.c -I/usr/openwin/include -I/usr/local/include -L/usr/openwin/lib -L/usr/local/lib -ltk4.1 -ltcl7.5 -lX11
+# For generic system (may have to add -I/-L options to find X11):
+#_tkinter _tkinter.c -I/usr/local/include -L/usr/local/lib -ltk4.1 -ltcl7.5 -lX11
+_tkinter _tkinter.c -I${PREFIX}/include/tk8.0 -I${PREFIX}/include/tcl8.0 -I${X11BASE}/include -L${PREFIX}/lib -L${X11BASE}/lib -ltk80 -ltcl80 -lX11