The Python programming language.

7 files changed, 325 insertions, 0 deletions

diff --git a/lang/python22/Makefile b/lang/python22/Makefile
new file mode 100644
index 000000000000..a8ea89a2cc8d
--- /dev/null
+++ b/lang/python22/Makefile
@@ -0,0 +1,26 @@
+# New ports collection makefile for:    python
+# Version required:     1.2
+# Date created:         08 August 1995
+# Whom:                 jkh
+#
+# $Id$
+#
+
+DISTNAME=       python1.2
+CATEGORIES+=	languages
+MASTER_SITES=	ftp://www.python.org/pub/python/src/
+
+MAINTAINER=	jkh@FreeBSD.org
+WRKSRC=		${WRKDIR}/Python-1.2
+HAS_CONFIGURE=	yes
+
+LIB_DEPENDS=	tcl\\.7\\.:${PORTSDIR}/lang/tcl \
+		tk\\.3\\.:${PORTSDIR}/x11/tk
+
+post-configure:
+	cp ${FILESDIR}/Setup ${WRKSRC}/Modules
+
+pre-install:
+	cd ${WRKSRC}; ${MAKE} libinstall
+
+.include <bsd.port.mk>
diff --git a/lang/python22/distinfo b/lang/python22/distinfo
new file mode 100644
index 000000000000..c2ecc13bd8c1
--- /dev/null
+++ b/lang/python22/distinfo
@@ -0,0 +1 @@
+MD5 (python1.2.tar.gz) = f4a9c715b24c680ddfed9c5378ec09a0
diff --git a/lang/python22/files/Setup b/lang/python22/files/Setup
new file mode 100644
index 000000000000..b840d2860e0d
--- /dev/null
+++ b/lang/python22/files/Setup
@@ -0,0 +1,276 @@
+# The file Setup is used by the makesetup script to construct the files
+# Makefile and config.c, from Makefile.pre and config.c.in,
+# respectively.  The file Setup itself is initially copied from
+# Setup.in; once it exists it will not be overwritten, so you can edit
+# Setup to your heart's content.  Note that Makefile.pre is created
+# from Makefile.pre.in by the toplevel configure script.
+
+# (VPATH notes: Setup and Makefile.pre are in the build directory, as
+# are Makefile and config.c; the *.in files are in the source
+# directory.)
+
+# Each line in this file describes one or more optional modules.
+# Comment out lines to suppress modules.
+# Lines have the following structure:
+#
+# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
+#
+# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
+# <cpparg> is anything starting with -I, -D, -U or -C
+# <library> is anything ending in .a or beginning with -l or -L
+# <module> is anything else but should be a valid Python
+# identifier (letters, digits, underscores, beginning with non-digit)
+#
+# Lines can also have the form
+#
+# <name> = <value>
+#
+# which defines a Make variable definition inserted into Makefile.in
+#
+# Finally, if a line has the literal form
+#
+# *noconfig*
+#
+# (that is including the '*' and '*' !) then the following modules will
+# not be included in the config.c file, nor in the list of objects to be
+# added to the library archive, and their linker options won't be added 
+# to the linker options, but rules to create their .o files and their
+# shared libraries will still be added to the Makefile, and their
+# names will be collected in the Make variable SHAREDMODS.  This is
+# used to build modules as shared libraries.  (They must be installed
+# using "make sharedinstall".)
+
+# NOTE: As a standard policy, as many modules as can be supported by a
+# platform should be present.  The distribution comes with all modules
+# enabled that are supported by most platforms and don't require you
+# to ftp sources from elsewhere.
+
+
+# Some special rules to define PYTHONPATH.
+# Edit the definitions below to indicate which options you are using.
+# Don't add any whitespace or comments!
+
+# Don't edit this (usually)
+DESTLIB=$(prefix)/lib/python
+
+# Standard enabled (tests are always available)
+TESTPATH=:$(DESTLIB)/test
+
+# Path for machine- or system-dependent modules (and shared libraries)
+MACHDEPPATH=:$(DESTLIB)/$(MACHDEP)
+
+COREPYTHONPATH=.:$(DESTLIB)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH)
+PYTHONPATH=$(COREPYTHONPATH)
+
+
+# The modules listed here can't be built as shared libraries for
+# various reasons; therefore they are listed here instead of in the
+# normal order.
+
+# Some modules that are normally always on:
+
+posix posixmodule.c		# posix (UNIX) system calls
+signal signalmodule.c		# signal(2)
+
+# The SGI specific GL module:
+
+#gl glmodule.c -lgl -lX11	# Graphics Library -- SGI only
+
+# Thread module -- works on selected systems only, e.g. SGI IRIX and
+# on SunOS 5.x (SOLARIS) only.
+# Note that you must have configured (and built!) Python with the
+# --with-thread option passed to the configure script for this to work:
+
+#thread threadmodule.c
+
+# Uncommenting the following line tells makesetup that all following
+# modules are to be built as shared libraries (see above for more
+# detail):
+
+#*noconfig*
+
+
+# Modules that should always be present (non UNIX dependent):
+
+array arraymodule.c	# array objects
+math mathmodule.c -lm	# math library functions, e.g. sin()
+parser parsermodule.c	# raw interface to the Python parser
+regex regexmodule.c regexpr.c	# Regular expressions, GNU Emacs style
+strop stropmodule.c	# fast string operations implemented in C
+struct structmodule.c	# binary structure packing/unpacking
+time timemodule.c	# time operations and variables
+
+
+# Modules with some UNIX dependencies -- on by default:
+# (If you have a really backward UNIX, select and socket may not be
+# supported...)
+
+fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
+pwd pwdmodule.c		# pwd(3) 
+grp grpmodule.c		# grp(3)
+crypt cryptmodule.c -lcrypt	# crypt(3); needs -lcrypt on some systems
+select selectmodule.c	# select(2); not on ancient System V
+socket socketmodule.c	# socket(2); not on ancient System V
+
+
+# Some more UNIX dependent modules -- off by default, since these
+# are not supported by all UNIX systems:
+
+dbm dbmmodule.c 	# dbm(3) may require -lndbm or similar
+nis nismodule.c 	# Sun yellow pages -- not everywhere
+termios termios.c	# Steen Lumholt's termios module
+
+
+# Multimedia modules -- on by default.
+# These represent audio samples or images as strings:
+
+audioop audioop.c	# Operations on audio samples
+imageop imageop.c	# Operations on images
+rgbimg rgbimgmodule.c   # Read SGI RGB image files (but coded portably)
+
+
+# The stdwin module provides a simple, portable (between X11 and Mac)
+# windowing interface.  You need to ftp the STDWIN library, e.g. from
+# ftp://ftp.cwi.nl/pub/stdwin.  (If you get it elsewhere, be sure to
+# get version 1.0 or higher!)  The STDWIN variable must point to the
+# STDWIN toplevel directory.
+
+# Uncomment and edit as needed:
+#STDWIN=/usr/ports/devel/stdwin/work/stdwin1.0
+
+# Uncomment these lines:
+#STDWINPATH=:$(DESTLIB)/stdwin
+#LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a
+#LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a
+#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11
+
+# Use this instead of the last two lines above for alphanumeric stdwin:
+#LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a
+#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap
+
+
+# The md5 module implements the RSA Data Security, Inc. MD5
+# Message-Digest Algorithm, described in RFC 1321.  The necessary files
+# md5c.c and md5.h are included here.
+
+md5 md5module.c md5c.c
+
+
+# The mpz module interfaces to the GNU Multiple Precision library.
+# You need to ftp the GNU MP library.  
+# The GMP variable must point to the GMP source directory.
+# This was originally written and tested against GMP 1.2.  I have
+# compiled it against GMP 1.3.2 (the latest I believe) and it seems to
+# work OK, but I haven't tested it thoroughly (lacking knowledge about
+# it).
+
+# A compatible MP library unencombered by the GPL also exists.  It was
+# posted to comp.sources.misc in volume 40 and is widely available from
+# FTP archive sites. One URL for it is:
+# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
+
+#GMP=/ufs/guido/src/gmp
+#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
+
+
+# SGI IRIX specific modules -- off by default.
+
+# These module work on any SGI machine:
+
+# *** gl must be enabled higher up in this file ***
+#fm fmmodule.c -lfm -lgl		# Font Manager
+#sgi sgimodule.c			# sgi.nap() and a few more
+
+# This module requires the header file
+# /usr/people/4Dgifts/iristools/include/izoom.h:
+
+#imgfile imgfile.c -limage -lgutil -lm	# Image Processing Utilities
+
+
+# These modules require the Multimedia Development Option (I think):
+
+#al almodule.c -laudio			# Audio Library
+#cd cdmodule.c -lcdaudio -lds -lmediad	# CD Audio Library
+#cl clmodule.c -lcl -lawareaudio	# Compression Library
+#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11	# Starter Video
+
+
+# The FORMS library, by Mark Overmars, implements user interface
+# components such as dialogs and buttons using SGI's GL and FM
+# libraries.  You must ftp the FORMS library separately from
+# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS.  It was tested with FORMS 2.2a.
+# The FORMS variable must point to the FORMS subdirectory of the forms
+# toplevel directory:
+
+#FORMS=/ufs/guido/src/forms/FORMS
+#fl flmodule.c -I$(FORMS) $(FORMS)/libforms.a -lfm -lgl
+
+
+# SunOS specific modules -- off by default:
+
+#sunaudiodev sunaudiodev.c
+
+
+# George Neville-Neil's timing module:
+
+#timing timingmodule.c
+
+
+# Steen Lumholt's tkinter module.
+#
+# For use with plain Tk, use the first line.
+#
+# For use with extended Tk (i.e. if you have added extra widgets to
+# the Tk library, such as the common "studButton" and "triButton"
+# extensions), edit tkappinit.c, add appropriate -DWITH_... and
+# libraries/objects to the second line, and use that.
+#
+# In all cases also enable the last line (TKPATH).
+#
+# This was designed to build with Tk 3.6 and Tcl 7.3, but also seems
+# to work Tk 4.0 beta.  (Tkinter.py hasn't been fixed though, so for
+# the time being Tk 3.6 is the version of choice!)
+
+# *** Use ONE of the following two lines, see previous comments ***
+tkinter tkintermodule.c -I/usr/local/include -I/usr/X11R6/include -L/usr/local/lib -L/usr/X11R6/lib -ltk -ltcl -lX11
+#tkinter tkintermodule.c tkappinit.c -DWITH_APPINIT -I/usr/local/include -L/usr/local/lib -ltk -ltcl -lX11
+
+# *** ALWAYS use this line as well ***
+TKPATH=:$(DESTLIB)/tkinter
+
+
+# Lance Ellinghaus's modules:
+
+rotor rotormodule.c		# enigma-inspired encryption
+syslog syslogmodule.c		# syslog daemon interface
+curses cursesmodule.c -lncurses -ltermcap	# guess what?
+				# (On Linux, try -lncurses)
+
+
+
+# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
+
+#new newmodule.c
+
+
+# John Redford's sybase module (requires sybase):
+
+#sybase sybasemodule.c
+
+
+# Generic (SunOS / SVR4) dynamic loading module.
+# This is not needed for dynamic loading of Python modules --
+# it is a highly experimental and dangerous device for calling
+# *arbitrary* C functions in *arbitrary* shared libraries:
+
+#dl dlmodule.c
+
+
+# Anthony Baxter's gdbm module (derived from Jack's dbm module)
+# GNU dbm(3) will require -lgdbm:
+
+#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
+
+
+# Example -- included for reference only:
+# xx xxmodule.c
diff --git a/lang/python22/files/patch-aa b/lang/python22/files/patch-aa
new file mode 100644
index 000000000000..a57bbba6ffa6
--- /dev/null
+++ b/lang/python22/files/patch-aa
@@ -0,0 +1,17 @@
+diff -c -r Modules/cursesmodule.c.orig Modules/cursesmodule.c
+*** Modules/cursesmodule.c.orig	Fri Mar 17 04:18:36 1995
+--- Modules/cursesmodule.c	Tue Aug  8 13:31:40 1995
+***************
+*** 145,151 ****
+--- 145,155 ----
+  
+  #include "Python.h"
+  
++ #ifdef __FreeBSD__
++ #include <ncurses.h>
++ #else
+  #include <curses.h>
++ #endif
+  
+  typedef struct {
+  	PyObject_HEAD
diff --git a/lang/python22/pkg-comment b/lang/python22/pkg-comment
new file mode 100644
index 000000000000..35436ed862ed
--- /dev/null
+++ b/lang/python22/pkg-comment
@@ -0,0 +1 @@
+Python - an interpreted object-oriented programming language.
diff --git a/lang/python22/pkg-descr b/lang/python22/pkg-descr
new file mode 100644
index 000000000000..a2103f1521db
--- /dev/null
+++ b/lang/python22/pkg-descr
@@ -0,0 +1,2 @@
+Python is an interpreted object-oriented programming language, and is
+often compared to Tcl, Perl or Scheme.
diff --git a/lang/python22/pkg-plist b/lang/python22/pkg-plist
new file mode 100644
index 000000000000..5d3c2a4b3c27
--- /dev/null
+++ b/lang/python22/pkg-plist
@@ -0,0 +1,2 @@
+bin/python
+lib/python