Upgrade to 2.1.

6 files changed, 11 insertions, 510 deletions

diff --git a/lang/python30/files/Setup b/lang/python30/files/Setup
deleted file mode 100644
index 5b32c7319622..000000000000
--- a/lang/python30/files/Setup
+++ /dev/null
@@ -1,437 +0,0 @@
-# -*- makefile -*-
-# The file Setup is used by the makesetup script to construct the files
-# Makefile and config.c, from Makefile.pre and config.c.in,
-# respectively.  The file Setup itself is initially copied from
-# Setup.in; once it exists it will not be overwritten, so you can edit
-# Setup to your heart's content.  Note that Makefile.pre is created
-# from Makefile.pre.in by the toplevel configure script.
-
-# (VPATH notes: Setup and Makefile.pre are in the build directory, as
-# are Makefile and config.c; the *.in files are in the source
-# directory.)
-
-# Each line in this file describes one or more optional modules.
-# Comment out lines to suppress modules.
-# Lines have the following structure:
-#
-# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
-#
-# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
-# <cpparg> is anything starting with -I, -D, -U or -C
-# <library> is anything ending in .a or beginning with -l or -L
-# <module> is anything else but should be a valid Python
-# identifier (letters, digits, underscores, beginning with non-digit)
-#
-# (As the makesetup script changes, it may recognize some other
-# arguments as well, e.g. *.so and *.sl as libraries.  See the big
-# case statement in the makesetup script.)
-#
-# Lines can also have the form
-#
-# <name> = <value>
-#
-# which defines a Make variable definition inserted into Makefile.in
-#
-# Finally, if a line contains just the word "*shared*" (without the
-# quotes but with the stars), then the following modules will not be
-# included in the config.c file, nor in the list of objects to be
-# added to the library archive, and their linker options won't be
-# added to the linker options, but rules to create their .o files and
-# their shared libraries will still be added to the Makefile, and
-# their names will be collected in the Make variable SHAREDMODS.  This
-# is used to build modules as shared libraries.  (They can be
-# installed using "make sharedinstall", which is implied by the
-# toplevel "make install" target.)  (For compatibility,
-# *noconfig* has the same effect as *shared*.)
-#
-# In addition, *static* reverses this effect (negating a previous
-# *shared* line).
-
-# NOTE: As a standard policy, as many modules as can be supported by a
-# platform should be present.  The distribution comes with all modules
-# enabled that are supported by most platforms and don't require you
-# to ftp sources from elsewhere.
-
-
-# Some special rules to define PYTHONPATH.
-# Edit the definitions below to indicate which options you are using.
-# Don't add any whitespace or comments!
-
-# Directories where library files get installed.
-# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
-DESTLIB=$(LIBDEST)
-MACHDESTLIB=$(BINLIBDEST)
-
-# NOTE: all the paths are now relative to the prefix that is computed
-# at run time!
-
-# Standard path -- don't edit.
-# No leading colon since this is the first entry.
-# Empty since this is now just the runtime prefix.
-DESTPATH=
-
-# Site specific path components -- should begin with : if non-empty
-SITEPATH=
-
-# Standard path components for test modules
-TESTPATH=
-
-# Path components for machine- or system-dependent modules and shared libraries
-MACHDEPPATH=:plat-$(MACHDEP)
-
-COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH)
-PYTHONPATH=$(COREPYTHONPATH)
-
-
-# The modules listed here can't be built as shared libraries for
-# various reasons; therefore they are listed here instead of in the
-# normal order.
-
-# Some modules that are normally always on:
-
-regex regexmodule.c regexpr.c	# Regular expressions, GNU Emacs style
-pcre pcremodule.c pypcre.c	# Regular expressions, Perl style (for re.py)
-posix posixmodule.c		# posix (UNIX) system calls
-signal signalmodule.c		# signal(2)
-_sre _sre.c			# Fredrik Lundh's new regular expressions
-
-# The SGI specific GL module:
-
-GLHACK=-Dclear=__GLclear
-#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
-
-# Pure module.  Cannot be linked dynamically.
-# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
-#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
-#PURE_INCLS=-I/usr/local/include
-#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
-#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
-
-# Uncommenting the following line tells makesetup that all following
-# modules are to be built as shared libraries (see above for more
-# detail; also note that *static* reverses this effect):
-
-#*shared*
-
-# GNU readline.  Unlike previous Python incarnations, GNU readline is
-# now incorporated in an optional module, configured in the Setup file
-# instead of by a configure script switch.  You may have to insert a
-# -L option pointing to the directory where libreadline.* lives,
-# and you may have to change -ltermcap to -ltermlib or perhaps remove
-# it, depending on your system -- see the GNU readline instructions.
-# It's okay for this to be a shared library, too.
-
-readline readline.c -lmytinfo -lreadline -ltermcap
-
-
-# Modules that should always be present (non UNIX dependent):
-
-array arraymodule.c	# array objects
-cmath cmathmodule.c # -lm # complex math library functions
-math mathmodule.c -lm # math library functions, e.g. sin()
-strop stropmodule.c	# fast string operations implemented in C
-struct structmodule.c	# binary structure packing/unpacking
-time timemodule.c # -lm # time operations and variables
-operator operator.c	# operator.add() and similar goodies
-_codecs _codecsmodule.c	# access to the builtin codecs and codec registry
-
-unicodedata unicodedata.c unicodedatabase.c
-                        # static Unicode character database
-ucnhash ucnhash.c # Unicode Character Name expansion hash table
-
-_locale _localemodule.c  # access to ISO C locale support
-
-
-# Modules with some UNIX dependencies -- on by default:
-# (If you have a really backward UNIX, select and socket may not be
-# supported...)
-
-fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
-pwd pwdmodule.c		# pwd(3) 
-grp grpmodule.c		# grp(3)
-errno errnomodule.c	# posix (UNIX) errno values
-select selectmodule.c	# select(2); not on ancient System V
-_socket socketmodule.c	# socket(2)
-
-# Memory-mapped files (also works on Win32).
-# Some platforms require -lucb.
-mmap mmapmodule.c # -lucb
-
-# Socket module compiled with SSL support; you must edit the SSL variable:
-#SSL=/usr/local/ssl
-#_socket socketmodule.c \
-#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-#	-L$(SSL)/lib -lssl -lcrypto
-
-# The crypt module is now disabled by default because it breaks builds
-# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
-crypt cryptmodule.c -lcrypt	# crypt(3); needs -lcrypt on some systems
-
-*shared*
-
-# Some more UNIX dependent modules -- off by default, since these
-# are not supported by all UNIX systems:
-
-nis nismodule.c #-lnsl	# Sun yellow pages -- not everywhere
-termios termios.c	# Steen Lumholt's termios module
-resource resource.c	# Jeremy Hylton's rlimit interface
-
-
-# Multimedia modules -- off by default.
-# These don't work for 64-bit platforms!!!
-# These represent audio samples or images as strings:
-
-audioop audioop.c	# Operations on audio samples
-imageop imageop.c	# Operations on images
-rgbimg rgbimgmodule.c   # Read SGI RGB image files (but coded portably)
-
-
-# The md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321.  The necessary files
-# md5c.c and md5.h are included here.
-
-md5 md5module.c md5c.c
-
-
-# The sha module implements the SHA checksum algorithm.
-# (NIST's Secure Hash Algorithm.)
-sha shamodule.c
-
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library.  
-# The GMP variable must point to the GMP source directory.
-# This was originally written and tested against GMP 1.2 and 1.3.2.
-# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-# haven't tested it recently.
-
-# A compatible MP library unencombered by the GPL also exists.  It was
-# posted to comp.sources.misc in volume 40 and is widely available from
-# FTP archive sites. One URL for it is:
-# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-
-#GMP=/ufs/guido/src/gmp
-#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
-
-
-# SGI IRIX specific modules -- off by default.
-
-# These module work on any SGI machine:
-
-# *** gl must be enabled higher up in this file ***
-#fm fmmodule.c $(GLHACK) -lfm -lgl		# Font Manager
-#sgi sgimodule.c			# sgi.nap() and a few more
-
-# This module requires the header file
-# /usr/people/4Dgifts/iristools/include/izoom.h:
-#imgfile imgfile.c -limage -lgutil -lgl -lm	# Image Processing Utilities
-
-
-# These modules require the Multimedia Development Option (I think):
-
-#al almodule.c -laudio			# Audio Library
-#cd cdmodule.c -lcdaudio -lds -lmediad	# CD Audio Library
-#cl clmodule.c -lcl -lawareaudio	# Compression Library
-#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11	# Starter Video
-
-
-# The FORMS library, by Mark Overmars, implements user interface
-# components such as dialogs and buttons using SGI's GL and FM
-# libraries.  You must ftp the FORMS library separately from
-# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS.  It was tested with FORMS 2.2a.
-# NOTE: if you want to be able to use FORMS and curses simultaneously
-# (or both link them statically into the same binary), you must
-# compile all of FORMS with the cc option "-Dclear=__GLclear".
-
-# The FORMS variable must point to the FORMS subdirectory of the forms
-# toplevel directory:
-
-#FORMS=/ufs/guido/src/forms/FORMS
-#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
-
-
-# SunOS specific modules -- off by default:
-
-#sunaudiodev sunaudiodev.c
-
-
-# Linux specific modules -- off by default:
-
-#linuxaudiodev linuxaudiodev.c
-
-
-# George Neville-Neil's timing module:
-
-timing timingmodule.c
-
-
-# The _tkinter module.
-#
-# The TKPATH variable is always enabled, to save you the effort.
-TKPATH=:lib-tk
-
-# The command for _tkinter is long and site specific.  Please
-# uncomment and/or edit those parts as indicated.  If you don't have a
-# specific extension (e.g. Tix or BLT), leave the corresponding line
-# commented out.  (Leave the trailing backslashes in!  If you
-# experience strange errors, you may want to join all uncommented
-# lines and remove the backslashes -- the backslash interpretation is
-# done by the shell's "read" command and it may not be implemented on
-# every system.
-
-# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
-# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-#	-I/usr/local/include \
-# *** Uncomment and edit to reflect where your X11 header files are:
-#	-I/usr/X11R6/include \
-# *** Or uncomment this for Solaris:
-#	-I/usr/openwin/include \
-# *** Uncomment and edit for Tix extension only:
-#	-DWITH_TIX -ltix4.1.8.0 \
-# *** Uncomment and edit for BLT extension only:
-#	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
-# *** Uncomment and edit for PIL (TkImaging) extension only:
-#	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \
-# *** Uncomment and edit for TOGL extension only:
-#	-DWITH_TOGL togl.c \
-# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-#	-L/usr/local/lib \
-# *** Uncomment and edit to reflect your Tcl/Tk versions:
-#	-ltk8.0 -ltcl8.0 \
-# *** Uncomment and edit to reflect where your X11 libraries are:
-#	-L/usr/X11R6/lib \
-# *** Or uncomment this for Solaris:
-#	-L/usr/openwin/lib \
-# *** Uncomment these for TOGL extension only:
-#	-lGL -lGLU -lXext -lXmu \
-# *** Uncomment for AIX:
-#	-lld \
-# *** Always uncomment this; X11 libraries to link with:
-#	-lX11
-
-# Lance Ellinghaus's modules:
-
-rotor rotormodule.c		# enigma-inspired encryption
-syslog syslogmodule.c		# syslog daemon interface
-
-
-# Curses support, requring the System V version of curses, often
-# provided by the ncurses library.  e.g. on Linux, link with -lncurses
-# instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
-# -L/usr/5lib before -lcurses).
-
-_curses _cursesmodule.c -lmytinfo -lcurses -ltermcap
-
-
-
-# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
-
-new newmodule.c
-
-
-# Generic (SunOS / SVR4) dynamic loading module.
-# This is not needed for dynamic loading of Python modules --
-# it is a highly experimental and dangerous device for calling
-# *arbitrary* C functions in *arbitrary* shared libraries:
-
-dl dlmodule.c
-
-
-# Modules that provide persistent dictionary-like semantics.  You will
-# probably want to arrange for at least one of them to be available on
-# your machine, though none are defined by default because of library
-# dependencies.  The Python module anydbm.py provides an
-# implementation independent wrapper for these; dumbdbm.py provides
-# similar functionality (but slower of course) implemented in Python.
-
-# The standard Unix dbm module:
-
-dbm dbmmodule.c 	# dbm(3) may require -lndbm or similar
-
-# Anthony Baxter's gdbm module.  GNU dbm(3) will require -lgdbm:
-
-#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
-
-
-# Berkeley DB interface.
-#
-# This requires the Berkeley DB code, see
-# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
-#
-# Edit the variables DB and DBPORT to point to the db top directory
-# and the subdirectory of PORT where you built it.
-#
-# (See http://www.jenkon-dev.com/~rd/python/ for an interface to
-# BSD DB 2.1.0.)
-
-# Note: If a db.h file is found by configure, bsddb will be enabled
-# automatically via Setup.config.in
-
-#DB=/depot/sundry/src/berkeley-db/db.1.85
-#DBPORT=$(DB)/PORT/irix.5.3
-#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
-
-
-
-# David Wayne Williams' soundex module (obsolete -- this will disappear!)
-#soundex soundex.c
-
-# Helper module for various ascii-encoders
-binascii binascii.c
-
-# Fred Drake's interface to the Python parser
-parser parsermodule.c
-
-# Digital Creations' cStringIO and cPickle
-cStringIO cStringIO.c
-cPickle cPickle.c
-
-
-# Lee Busby's SIGFPE modules.
-# The library to link fpectl with is platform specific.
-# Choose *one* of the options below for fpectl:
-
-# For SGI IRIX (tested on 5.3):
-#fpectl fpectlmodule.c -lfpe
-
-# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
-# (Without the compiler you don't have -lsunmath.)
-#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
-
-# For other systems: see instructions in fpectlmodule.c.
-fpectl fpectlmodule.c
-
-# Test module for fpectl.  No extra libraries needed.
-fpetest fpetestmodule.c
-
-# Andrew Kuchling's zlib module.
-# This require zlib 1.1.3 (or later).
-# See http://www.cdrom.com/pub/infozip/zlib/
-zlib zlibmodule.c -lz
-
-# Interface to the Expat XML parser
-#
-# Expat is written by James Clark and must be downloaded separately
-# (see below).  The pyexpat module was written by Paul Prescod after a
-# prototype by Jack Jansen.
-#
-# The Expat dist includes Windows .lib and .dll files.  Home page is at
-# http://www.jclark.com/xml/expat.html, the current production release is
-# always ftp://ftp.jclark.com/pub/xml/expat.zip.
-#
-# EXPAT_DIR, below, should point to the expat/ directory created by
-# unpacking the Expat source distribution.
-#
-# Note: the expat build process doesn't yet build a libexpat.a; you can
-# do this manually while we try convince the author to add it.  To do so,
-# cd to EXPAT_DIR, run "make" if you have not done so, then run:
-#
-#    ar cr libexpat.a xmltok/*.o xmlparse/*.o
-#
-#EXPAT_DIR=/usr/local/src/expat
-#pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat
-
-
-# Example -- included for reference only:
-# xx xxmodule.c
diff --git a/lang/python30/files/Setup.OpenSSL b/lang/python30/files/Setup.OpenSSL
deleted file mode 100644
index c675971496ca..000000000000
--- a/lang/python30/files/Setup.OpenSSL
+++ /dev/null
@@ -1,6 +0,0 @@
-*static*
-
-# Socket module compiled with SSL support; you must edit the SSL variable:
-SSL=/usr
-_socket socketmodule.c -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl -L$(SSL)/lib -lssl -lcrypto
-
diff --git a/lang/python30/files/Setup.gmp b/lang/python30/files/Setup.gmp
deleted file mode 100644
index 5e70d8f76734..000000000000
--- a/lang/python30/files/Setup.gmp
+++ /dev/null
@@ -1,16 +0,0 @@
-*shared*
-
-# The mpz module interfaces to the GNU Multiple Precision library.
-# You need to ftp the GNU MP library.  
-# The GMP variable must point to the GMP source directory.
-# This was originally written and tested against GMP 1.2 and 1.3.2.
-# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
-# haven't tested it recently.
-
-# A compatible MP library unencombered by the GPL also exists.  It was
-# posted to comp.sources.misc in volume 40 and is widely available from
-# FTP archive sites. One URL for it is:
-# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
-
-GMP=/usr/src/contrib/libgmp
-mpz mpzmodule.c -I$(GMP) -I$(GMP)/mpn/generic -lgmp
diff --git a/lang/python30/files/patch-Modules:readline.c b/lang/python30/files/patch-Modules:readline.c
deleted file mode 100644
index 5d59dde25c28..000000000000
--- a/lang/python30/files/patch-Modules:readline.c
+++ /dev/null
@@ -1,38 +0,0 @@
---- Modules/readline.c.orig	Mon Oct 16 21:49:34 2000
-+++ Modules/readline.c	Wed Apr 25 06:23:47 2001
-@@ -17,32 +17,13 @@
- #endif
- 
- /* GNU readline definitions */
--/* If you have string.h, you might need to add yourself to this #if... [cjh] */
--#if defined(__BEOS__)
--#undef HAVE_CONFIG_H
--/* At max warnings, we need protos for everything. [cjh] */
-+#undef HAVE_CONFIG_H /* Else readline/chardefs.h includes strings.h */
- #include <readline/readline.h>
- #include <readline/history.h>
--#include <unistd.h>
--#else
--#include <readline/readline.h> /* You may need to add an -I option to Setup */
--
--extern int rl_parse_and_bind(char *);
--extern int rl_read_init_file(char *);
--extern int rl_insert_text(char *);
--extern int rl_bind_key(int, Function *);
--extern int rl_bind_key_in_map(int, Function *, Keymap);
--extern int rl_initialize(void);
--extern int add_history(char *);
--extern int read_history(char *);
--extern int write_history(char *);
--extern int history_truncate_file(char *, int);
--extern Function *rl_event_hook;
--#endif
- 
- /* Pointers needed from outside (but not declared in a header file). */
--extern int (*PyOS_InputHook)(void);
--extern char *(*PyOS_ReadlineFunctionPointer)(char *);
-+extern DL_IMPORT(int) (*PyOS_InputHook)(void);
-+extern DL_IMPORT(char) *(*PyOS_ReadlineFunctionPointer)(char *);
- 
- 
- /* Exported function to send one line to readline's init file parser */
diff --git a/lang/python30/files/patch-aa b/lang/python30/files/patch-aa
deleted file mode 100644
index b4e298027a7e..000000000000
--- a/lang/python30/files/patch-aa
+++ /dev/null
@@ -1,13 +0,0 @@
---- Makefile.in.orig	Wed Aug 30 11:43:56 2000
-+++ Makefile.in	Wed Aug 30 16:32:22 2000
-@@ -110,8 +110,8 @@
- 
- # Portable install script (configure doesn't always guess right)
- INSTALL=	@srcdir@/install-sh -c
--INSTALL_PROGRAM=${INSTALL} -m $(EXEMODE)
--INSTALL_DATA=	${INSTALL} -m $(FILEMODE)
-+INSTALL_PROGRAM=${BSD_INSTALL_SCRIPT}
-+INSTALL_DATA=	${BSD_INSTALL_DATA}
- 
- # Use this to make a link between python$(VERSION) and python in $(BINDIR)
- LN=@LN@
diff --git a/lang/python30/files/patch-setup.py b/lang/python30/files/patch-setup.py
new file mode 100644
index 000000000000..fd0d484c38db
--- /dev/null
+++ b/lang/python30/files/patch-setup.py
@@ -0,0 +1,11 @@
+--- setup.py.orig	Fri Mar  2 07:24:14 2001
++++ setup.py	Mon Mar  5 15:26:17 2001
+@@ -14,7 +14,7 @@
+ from distutils.command.build_ext import build_ext
+ 
+ # This global variable is used to hold the list of modules to be disabled.
+-disabled_module_list = []
++disabled_module_list = ["_tkinter", "gdbm", "pyexpat"]
+ 
+ def find_file(filename, std_dirs, paths):
+     """Searches for the directory where a given file is located,