* Add a WITH_IPV6 knob. Exim breaks if compiled with IPv6 support and

  run with a kernel that has had IPv6 ommitted from its configuration,
  so I can't make this a default (yet).

* Remove crazy handling of exim.sh and replace it with something much
  simpler and more sane.  This allows non-root users to build, even if
  they can't install (properly).

3 files changed, 29 insertions, 33 deletions

diff --git a/mail/exim-old/Makefile b/mail/exim-old/Makefile
index 6b9b62e06879..74e96187f5a1 100644
--- a/mail/exim-old/Makefile
+++ b/mail/exim-old/Makefile
@@ -36,6 +36,10 @@ MAKE_ENV+=	OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH}
 #WITH_MYSQL=		yes
 #WITH_PGSQL=		yes
 
+# Only define WITH_IPV6 on systems with IPv6 support compiled into the
+# kernel.  Exim's IPv6 support is still experimental.
+#WITH_IPV6=		yes
+
 # If WITH_LDAP is defined, LDAP_LIB_TYPE must be one of UMICHIGAN,
 # NETSCAPE or SOLARIS7.
 LDAP_LIB_TYPE=UMICHIGAN
@@ -133,6 +137,10 @@ SEDLIST+=	-e 's,XX_PGSQL_LIBS_XX,-L${PREFIX}/pgsql/lib -lpq,' \
 SEDLIST+=	-e 's,XX_PGSQL_[^ ]*_XX,,'
 .endif
 
+.if defined(WITH_IPV6)
+SEDLIST+=	-e 's,^\# HAVE_IPV6=,HAVE_IPV6=,'
+.endif
+
 .if !defined(WITH_PGSQL) && !defined(WITH_MYSQL) && !defined(WITH_LDAP)
 SEDLIST+=	-e 's,^LOOKUP_LIBS,\#LOOKUP_LIBS,' \
 		-e 's,^LOOKUP_INCLUDE,\#LOOKUP_INCLUDE,'
@@ -166,12 +174,13 @@ do-configure:
 	done
 
 post-build:
-	${INSTALL_SCRIPT} ${FILESDIR}/exim.sh \
-		${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}
 	${TOUCH} ${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}/eximon.bin
 	${TOUCH} ${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}/eximon
 
 pre-install:
 	@PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
 
+post-install:
+	${INSTALL_SCRIPT} ${FILESDIR}/exim.sh ${PREFIX}/etc/rc.d
+
 .include <bsd.port.mk>
diff --git a/mail/exim-old/files/patch-aa b/mail/exim-old/files/patch-aa
index 8d43ae95028e..9d71d8104a39 100644
--- a/mail/exim-old/files/patch-aa
+++ b/mail/exim-old/files/patch-aa
@@ -1,22 +1,19 @@
-This patch makes four changes to the exim_install script:
+This patch makes three changes to the exim_install script:
 
-1) Changes the test used to determine whether a file should be installed
+*) Changes the test used to determine whether a file should be installed
    to cope with files which we "touch" to zero bytes for packaging
    purposes.
 
-2) Causes an exim.sh startup script to be installed in the BSD-style
-   ${PREFIX}/etc/rc.d
-
-3) Causes the configure file to be installed as a sample only.  The
+*) Causes the configure file to be installed as a sample only.  The
    administrator needs to rename this file to "activate" exim.
 
-4) Changes the invocation of make-info to be less prone to fail on
+*) Changes the invocation of make-info to be less prone to fail on
    silly errors.  XXX Check that this is still necessary from time
    to time.
 
 --- scripts/exim_install.orig	Mon Aug  2 17:43:03 1999
 +++ scripts/exim_install	Tue Aug  3 14:31:20 1999
-@@ -142,9 +142,9 @@
+@@ -146,9 +146,9 @@
      from=../util/
    fi
  
@@ -28,31 +25,13 @@ This patch makes four changes to the exim_install script:
      echo $com "*** Have you built Exim successfully?"
      echo $com "*** Exim installation ${ver}failed ***"
      exit 1
-@@ -195,25 +195,40 @@
+@@ -199,25 +199,20 @@
    fi
  done
  
-+# Install exim.sh startup script in FreeBSD's ${PREFIX}/etc/rc.d so that
-+# exim will start up on boot once sendmail is disabled and
-+# ${PREFIX}/etc/exim/configure is in place.
- 
-+echo $com ""
- 
+-
+-
 -# If there is no configuration file, install the default.
-+if [ -f ${PREFIX}/etc/rc.d/exim.sh ]; then
-+  echo $com "${PREFIX}/etc/rc.d/exim.sh exists, not overwritten"
-+else
-+  echo $com "Installing exim.sh startup script in ${PREFIX}/etc/rc.d"
-+  ${real} mkdir -p ${PREFIX}/etc/rc.d
-+  echo ${CP} -p exim.sh ${PREFIX}/etc/rc.d/
-+  ${real} ${CP} -p exim.sh ${PREFIX}/etc/rc.d/
-+  if [ $? -ne 0 ]; then
-+    echo $com ""
-+    echo $com "**** Exim installation ${ver}failed ****"
-+    exit 1
-+  fi
-+fi
-+
 +# Install only a sample configuration, which encourages the admin to look
 +# at it, since Exim won't run without a configure file.
  
@@ -78,7 +57,7 @@ This patch makes four changes to the exim_install script:
  
  # Install info files if the directory is defined and the Texinfo
  # source documentation is present.
-@@ -235,19 +250,21 @@
+@@ -239,19 +234,21 @@
    echo $com Info installation directory is ${INFO_DIRECTORY}
    echo $com ""
  
diff --git a/mail/exim-old/files/patch-src::EDITME b/mail/exim-old/files/patch-src::EDITME
index 34dd37491198..e5f897f0c3bd 100644
--- a/mail/exim-old/files/patch-src::EDITME
+++ b/mail/exim-old/files/patch-src::EDITME
@@ -96,10 +96,18 @@
  
  # If you are running Exim as a server, note that just building it with TLS
  # support is not usually all you need to do. You normally need to set up a
-@@ -573,5 +576,6 @@
+@@ -573,5 +576,14 @@
  # chapter on building and installing Exim.
  
  # USE_TCP_WRAPPERS=yes
 +EXTRALIBS=XX_TCP_WRAPPERS_LIBS_XX XX_PAM_LIBS_XX
++
++
++# IPv6 is coming. Exim has experimental support that has been tried out on
++# one or two OS. See the file README.IPV6 for the current status of this
++# support. Do not set this option unless you are working on IPv6 and know
++# what you are doing.
++
++# HAVE_IPV6=yes
  
  # End of EDITME