* UPDATING

Add entry about OPTIONS and SPF patch in mail/postfix

* mail/Makefile

Add postfix22

* mail/postfix [1]

Update to 2.3.0
Use OPTIONS instead of scripts
Add message about unsupported POSTFIX_OPTIONS
Remove SPF patch since that's not apply clean
Update pkg-descr
Change rcNG to rc only
Update CONFLICTS

* mail/postfix-current

Now postfix-current are called postfix-current instead of postfix.
Update CONFLICTS
Bump PORTREVISION
Store OPTIONSFILE in another local to not conflict with mail/postfix
Change rcNG to rc only

* mail/postfix1

Update CONFLICTS

* mail/postfix21

Update CONFLICTS
Change rcNG to rc only

* mail/postfix22 [2]

Update CONFLICTS
Change rcNG to rc only

Approved by:	maintainer [1]
Repocopy by:	marcus [2]

10 files changed, 284 insertions, 332 deletions

diff --git a/mail/postfix27/Makefile b/mail/postfix27/Makefile
index 7152cb281f74..710b25b5f6d4 100644
--- a/mail/postfix27/Makefile
+++ b/mail/postfix27/Makefile
@@ -5,18 +5,8 @@
 # $FreeBSD$
 #
 
-# To pre-select options in batch mode, run make like this:
-#
-#  make -DBATCH POSTFIX_OPTIONS="BDB TLS"
-#
-# the options are the same names as in the scripts/configure.postfix file.
-# POSTFIX_OPTIONS can be set in /etc/make.conf also.
-
-# NOTE: PCRE is enabled by default unless you specifically disable it.
-
 PORTNAME=	postfix
-PORTVERSION=	2.2.10
-PORTREVISION=	1
+PORTVERSION=	2.3.0
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
@@ -33,29 +23,59 @@ DIST_SUBDIR=	${PORTNAME}
 MAINTAINER=	vivek@khera.org
 COMMENT=	A secure alternative to widely-used Sendmail
 
-CONFLICTS=	courier-0.* postfix-1.* postfix-2.0.* postfix-2.1.* postfix-2.3.* \
+CONFLICTS=	courier-0.* postfix-1.* postfix-2.[0-24-9].* postfix-current-2.* \
 		sendmail-8.* sendmail-*-8.* smail-3.* zmailer-2.*
+
 USE_SUBMAKE=	yes
+USE_PERL5_BUILD=yes
 USE_RC_SUBR=	postfix.sh
 
+# back compat pull in settings from POSTFIX_OPTIONS for convenience when
+# make config is run (happens first time port is built, too)
+.for o in SASL SASL2 SASLKRB SASLKRB5 SASLKRB5MIT SPF TLS BDB MySQL PgSQL OpenLDAP CDB NIS VDA Test
+STATUS_${o}=off
+.endfor
+.if defined(POSTFIX_OPTIONS)
+. for o in ${POSTFIX_OPTIONS}
+STATUS_${o}=on
+. endfor
+.endif
+
+OPTIONS=	PCRE		"Perl Compatible Regular Expressions"			on \
+		SASL		"Cyrus SASLv1 (Simple Auth. and Sec. Layer)"		${STATUS_SASL} \
+		SASL2		"Cyrus SASLv2 (Simple Auth. and Sec. Layer)"		${STATUS_SASL2} \
+		DOVECOT		"Dovecot SASL authentication method"			off \
+		SASLKRB		"If your SASL req. Kerberos select this option"		${STATUS_SASLKRB} \
+		SASLKRB5	"If your SASL req. Kerberos5 select this option"	${STATUS_SASLKRB5} \
+		SASLKMIT	"If your SASL req. MIT Kerberos5 select this option"	${STATUS_SASLKRB5MIT} \
+		TLS		"Enable SSL and TLS support"				${STATUS_TLS} \
+		BDB		"Berkeley DB (choose version with WITH_BDB_VER)"	${STATUS_BDB} \
+		MYSQL		"MySQL maps (choose version with WITH_MYSQL_VER)"	${STATUS_MySQL} \
+		PGSQL		"PostgreSQL maps (choose with DEFAULT_PGSQL_VER)"	${STATUS_PgSQL} \
+		OPENLDAP	"OpenLDAP maps (choose ver. with WITH_OPENLDAP_VER)"	${STATUS_OpenLDAP} \
+		CDB		"CDB maps lookups"					${STATUS_CDB} \
+		NIS		"NIS maps lookups"					${STATUS_NIS} \
+		VDA		"VDA (Virtual Delivery Agent)"				${STATUS_VDA} \
+		TEST		"SMTP/LMTP test server and generator"			${STATUS_Test}
+
 MAN1=	postalias.1 postcat.1 postconf.1 postdrop.1 postfix.1 postkick.1 \
 	postlock.1 postlog.1 postmap.1 postqueue.1 postsuper.1 sendmail.1
 
-MAN5=	access.5 aliases.5 canonical.5 cidr_table.5 generic.5 header_checks.5 \
-	ldap_table.5 master.5 mysql_table.5 nisplus_table.5 pcre_table.5 \
-	pgsql_table.5 postconf.5 regexp_table.5 relocated.5 transport.5 \
-	virtual.5
+MAN5=	access.5 aliases.5 bounce.5 canonical.5 cidr_table.5 generic.5 \
+	header_checks.5 ldap_table.5 master.5 mysql_table.5 nisplus_table.5 \
+	pcre_table.5 pgsql_table.5 postconf.5 regexp_table.5 relocated.5 \
+	tcp_table.5 transport.5 virtual.5
 
-MAN8=	anvil.8 bounce.8 cleanup.8 discard.8 error.8 flush.8 lmtp.8 local.8 \
-	master.8 oqmgr.8 pickup.8 pipe.8 proxymap.8 qmgr.8 qmqpd.8 scache.8 \
-	showq.8 smtp.8 smtpd.8 spawn.8 tlsmgr.8 trivial-rewrite.8 verify.8 \
-	virtual.8
+MAN8=	anvil.8 bounce.8 cleanup.8 discard.8 error.8 flush.8 local.8 master.8 \
+	oqmgr.8 pickup.8 pipe.8 proxymap.8 qmgr.8 qmqpd.8 scache.8 showq.8 \
+	smtp.8 smtpd.8 spawn.8 tlsmgr.8 trivial-rewrite.8 verify.8 virtual.8
 
 MLINKS=	sendmail.1 mailq.1 \
 	sendmail.1 newaliases.1 \
 	header_checks.5 body_checks.5 \
 	bounce.8 defer.8 \
-	bounce.8 trace.8
+	bounce.8 trace.8 \
+	smtp.8 lmtp.8
 
 CONF1=	access aliases canonical generic header_checks main.cf master.cf \
 	relocated transport virtual
@@ -68,25 +88,129 @@ MAKEFILEFLAGS+=	CC="${CC}" OPT="${CFLAGS}"
 
 SCRIPTS_ENV=	WRKDIRPREFIX="${WRKDIRPREFIX}" \
 		TOUCH="${TOUCH}" \
-		MKDIR="${MKDIR}" \
-		POSTFIX_OPTIONS="${POSTFIX_OPTIONS}"
+		MKDIR="${MKDIR}"
 
-# Default requirement for postfix rcNG
+.include <bsd.port.pre.mk>
+
+# Default requirement for postfix rc script
 _REQUIRE=	DAEMON
 
-pre-fetch:
-	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.postfix
+.if defined(WITH_PCRE)
+LIB_DEPENDS+=		pcre.0:${PORTSDIR}/devel/pcre
+POSTFIX_CCARGS+=	-DHAS_PCRE -I${LOCALBASE}/include
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lpcre
+.else
+POSTFIX_CCARGS+=	-DNO_PCRE
+.endif
 
-.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
-.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
+.if defined(WITH_SASL)
+.if defined(WITH_SASL2) || defined(WITH_DOVECOT)
+BROKEN=			Select only one SASL authentication method
+.endif
+LIB_DEPENDS+=		sasl.8:${PORTSDIR}/security/cyrus-sasl
+POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -DUSE_CYRUS_SASL -I${LOCALBASE}/include -I${LOCALBASE}/include/sasl1
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lsasl -lpam -lcrypt
 .endif
 
-.if defined(WITHOUT_PCRE)
-POSTFIX_CCARGS+=	-DNO_PCRE
+.if defined(WITH_SASL2)
+.if defined(WITH_SASL) || defined(WITH_DOVECOT)
+BROKEN=			Select only one SASL authentication method
+.endif
+LIB_DEPENDS+=		sasl2.2:${PORTSDIR}/security/cyrus-sasl2
+POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -DUSE_CYRUS_SASL -I${LOCALBASE}/include -I${LOCALBASE}/include/sasl
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lsasl2 -lpam -lcrypt
+.endif
+
+.if defined(WITH_DOVECOT)
+.if defined(WITH_SASL) || defined(WITH_SASL2)
+BROKEN=			Select only one SASL authentication method
+.endif
+RUN_DEPENDS+=		dovecot:${PORTSDIR}/mail/dovecot
+POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -DDEF_SERVER_SASL_TYPE=\"dovecot\"
+.endif
+
+.if defined(WITH_SASLKRB)
+.if defined(WITH_SASLKRB5) || defined(WITH_SASLKMIT)
+BROKEN=			Select only one SASL Kerberos option
+.endif
+POSTFIX_AUXLIBS+=	-lkrb -lcrypto -lcom_err
+.endif
+
+.if defined(WITH_SASLKRB5)
+.if defined(WITH_SASLKRB) || defined(WITH_SASLKMIT)
+BROKEN=			Select only one SASL Kerberos option
+.endif
+POSTFIX_AUXLIBS+=	-lkrb5 -lcrypto -lcrypt -lcom_err -lasn1 -lroken
+.endif
+
+.if defined(WITH_SASLKMIT)
+.if defined(WITH_SASLKRB) || defined(WITH_SASLKRB5)
+BROKEN=			Select only one SASL Kerberos option
+.endif
+LIB_DEPENDS+=		krb5.3:${PORTSDIR}/security/krb5
+POSTFIX_AUXLIBS+=	-Wl,--rpath,$${KRB5_HOME:-${LOCALBASE}}/lib -lkrb5 -lcrypto -lcrypt -lcom_err
+.endif
+
+.if defined(WITH_TLS)
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
+POSTFIX_CCARGS+=	-DUSE_TLS -I${OPENSSLINC}
+POSTFIX_AUXLIBS+=	-L${OPENSSLLIB} ${LDFLAGS} -lssl -lcrypto
+.endif
+
+.if defined(WITH_BDB)
+USE_BDB=		yes
+POSTFIX_CCARGS+=	-I${BDB_INCLUDE_DIR}
+POSTFIX_AUXLIBS+=	-L${BDB_LIB_DIR} -l${BDB_LIB_NAME}
+.endif
+
+.if defined(WITH_MYSQL)
+USE_MYSQL=		yes
+POSTFIX_CCARGS+=	-DHAS_MYSQL -I${LOCALBASE}/include/mysql
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib/mysql -lmysqlclient -lz -lcrypt -lm
+_REQUIRE+=		mysql
+.endif
+
+.if defined(WITH_PGSQL)
+USE_PGSQL=		yes
+POSTFIX_CCARGS+=	-DHAS_PGSQL -I${LOCALBASE}/include -I${LOCALBASE}/pgsql/include
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -L${LOCALBASE}/pgsql/lib -lpq -lcrypt
+_REQUIRE+=		postgresql
+.endif
+
+.if defined(WITH_OPENLDAP)
+USE_OPENLDAP=		yes
+.if defined(WITH_OPENLDAP_VER)
+WANT_OPENLDAP_VER=	${WITH_OPENLDAP_VER}
+.endif
+POSTFIX_CCARGS+=	-DHAS_LDAP -I${LOCALBASE}/include
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lldap -llber
+_REQUIRE+=		slapd
+.endif
+
+.if defined(WITH_CDB)
+BUILD_DEPENDS+=		${LOCALBASE}/lib/libcdb.a:${PORTSDIR}/databases/tinycdb
+POSTFIX_CCARGS+=	-DHAS_CDB -I${LOCALBASE}/include
+POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lcdb
+.endif
+
+.if defined(WITH_NIS)
+POSTFIX_CCARGS+=	-DHAS_NIS
+_REQUIRE+=		ypserv
+.endif
+
+.if defined(WITH_VDA)
+PATCH_SITES+=		http://web.onda.com.br/nadal/postfix/VDA/
+PATCHFILES+=		postfix-2.3.0-vda.patch.gz
+PATCH_DIST_STRIP=	-p1
+.endif
+
+.if defined(WITH_TEST)
+BINTEST=	qmqp-sink qmqp-source smtp-sink smtp-source
+MANTEST=	qmqp-sink.1 qmqp-source.1 smtp-sink.1 smtp-source.1
+MAN1+=		${MANTEST}
+PLIST_SUB+=	SUB_TEST=""
 .else
-LIB_DEPENDS+=		pcre.0:${PORTSDIR}/devel/pcre
-POSTFIX_CCARGS+=	-DHAS_PCRE -I${LOCALBASE}/include
-POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lpcre
+PLIST_SUB+=	SUB_TEST="@comment "
 .endif
 
 .if defined(NOPORTDOCS)
@@ -98,22 +222,57 @@ READMEDIR=${PREFIX}/share/doc/postfix
 SUB_LIST+=	REQUIRE="${_REQUIRE}"
 
 pre-patch:
+.if defined(POSTFIX_OPTIONS)
+	@${ECHO_MSG}
+	@${ECHO_MSG}
+	@${ECHO_MSG}
+	@${ECHO_MSG} "***** ALERT *****"
+	@${ECHO_MSG} "POSTFIX_OPTIONS is doesn't supported anymore"
+	@${ECHO_MSG} "${PORTNAME} uses OPTIONS, consider running:"
+	@${ECHO_MSG} "# make config"
+	@${ECHO_MSG}
+	@${ECHO_MSG}
+	@${ECHO_MSG}
+	@sleep 10
+.endif
+
+.if defined(WITH_SASL) && !defined(WITH_MYSQL) && exists(${LOCALBASE}/lib/libsasl.a)
+	@if /usr/bin/nm ${LOCALBASE}/lib/libsasl.a | ${GREP} -wq "mysql_init"; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "Your SASL library it's compiled with MYSQL"; \
+		${ECHO_MSG} "If you use MYSQL in ${PORTNAME} consider CTRL+C and"; \
+		${ECHO_MSG} "select MYSQL OPTION in config menu."; \
+		${ECHO_MSG} "# make clean config"; \
+		${ECHO_MSG}; \
+		sleep 5; \
+	fi
+.endif
+.if defined(WITH_SASL2) && !defined(WITH_MYSQL) && exists(${LOCALBASE}/lib/libsasl2.a)
+	@if /usr/bin/nm ${LOCALBASE}/lib/libsasl2.a | ${GREP} -wq "mysql_init"; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "Your SASL2 library it's compiled with MYSQL"; \
+		${ECHO_MSG} "If you use MYSQL in ${PORTNAME} consider CTRL+C and"; \
+		${ECHO_MSG} "select MYSQL OPTION in config menu."; \
+		${ECHO_MSG} "# make clean config"; \
+		${ECHO_MSG}; \
+		sleep 5; \
+	fi
+.endif
+
 	@${ECHO} "<HTML><BODY>See <A HREF="header_checks.5.html">header_checks.5.html</A></BODY></HTML>" \
 		> ${WRKSRC}/html/body_checks.5.html
-	@for f in `${FIND} -P ${WRKSRC}/man -type f`; do \
-		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
-	done
-	@for f in `${FIND} -P ${WRKSRC}/README_FILES -type f`; do \
-		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
-	done
-	@for f in `${FIND} -P ${WRKSRC}/conf -type f`; do \
-		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" $${f}; \
-	done
+	@${FIND} -P ${WRKSRC}/man -type f | ${XARGS} \
+		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g"
+	@${FIND} -P ${WRKSRC}/README_FILES -type f | ${XARGS} \
+		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g"
+	@${FIND} -P ${WRKSRC}/conf -type f | ${XARGS} \
+		${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g"
 
 post-patch:
 # All files modified with ${FILESDIR}/patch-* to use !!PREFIX!! need REINPLACE. Put below.
 	@${REINPLACE_CMD} -e "s,!!PREFIX!!,${PREFIX},g" \
 		${WRKSRC}/conf/main.cf ${WRKSRC}/src/global/mail_params.h
+	@${REINPLACE_CMD} -e "s|perl|${PERL}|" ${WRKSRC}/src/bounce/Makefile.in
 
 do-configure:
 	(cd ${WRKSRC} && ${MAKE} -f Makefile.init makefiles ${MAKEFILEFLAGS} \
@@ -125,38 +284,38 @@ pre-install:
 
 do-install:
 	cd ${WRKSRC}; ${SH} postfix-install -non-interactive install_root=/ tempdir=/tmp \
-	config_directory=${PREFIX}/etc/postfix \
-	daemon_directory=${PREFIX}/libexec/postfix \
-	command_directory=${PREFIX}/sbin \
-	queue_directory=/var/spool/postfix \
-	sendmail_path=${PREFIX}/sbin/sendmail \
-	newaliases_path=${PREFIX}/bin/newaliases \
-	mailq_path=${PREFIX}/bin/mailq \
-	mail_owner=postfix \
-	setgid_group=maildrop \
-	manpage_directory=${PREFIX}/man \
-	sample_directory=${PREFIX}/etc/postfix \
-	readme_directory=${READMEDIR}
-
-	@${INSTALL_SCRIPT} ${WRKSRC}/auxiliary/rmail/rmail ${PREFIX}/bin/rmail
-
-.	for f in ${BINTEST}
-		@${INSTALL_PROGRAM} ${WRKSRC}/bin/${f} ${PREFIX}/sbin
-.	endfor
-.	for f in ${MANTEST}
-		@${INSTALL_MAN} ${WRKSRC}/man/man1/${f} ${MANPREFIX}/man/man1
-.	endfor
+		config_directory=${PREFIX}/etc/postfix \
+		daemon_directory=${PREFIX}/libexec/postfix \
+		command_directory=${PREFIX}/sbin \
+		queue_directory=/var/spool/postfix \
+		sendmail_path=${PREFIX}/sbin/sendmail \
+		newaliases_path=${PREFIX}/bin/newaliases \
+		mailq_path=${PREFIX}/bin/mailq \
+		mail_owner=postfix \
+		setgid_group=maildrop \
+		manpage_directory=${MANPREFIX}/man \
+		sample_directory=${PREFIX}/etc/postfix \
+		readme_directory=${READMEDIR}
+
+	${INSTALL_SCRIPT} ${WRKSRC}/auxiliary/rmail/rmail ${PREFIX}/bin/rmail
+
+.for f in ${BINTEST}
+	${INSTALL_PROGRAM} ${WRKSRC}/bin/${f} ${PREFIX}/sbin
+.endfor
+.for f in ${MANTEST}
+	${INSTALL_MAN} ${WRKSRC}/man/man1/${f} ${MANPREFIX}/man/man1
+.endfor
 
 	@${MKDIR} ${PREFIX}/etc/postfix/dist
-.	for f in ${CONF1}
-		${INSTALL_DATA} ${WRKSRC}/conf/${f} ${PREFIX}/etc/postfix/dist
-.	endfor
+.for f in ${CONF1}
+	${INSTALL_DATA} ${WRKSRC}/conf/${f} ${PREFIX}/etc/postfix/dist
+.endfor
 
-.	if !defined(NOPORTDOCS)
-		@${INSTALL} -d -o ${DOCOWN} -g ${DOCGRP} -m 555 ${DOCSDIR}
-		@cd ${WRKSRC}/html && ${INSTALL_DATA} *.html *.jpg *.png ${DOCSDIR} && \
-			${ECHO_MSG} "Installed HTML documentation in ${DOCSDIR}"
-.	endif
+.if !defined(NOPORTDOCS)
+	${INSTALL} -d -o ${DOCOWN} -g ${DOCGRP} -m 555 ${DOCSDIR}
+	@cd ${WRKSRC}/html && ${INSTALL_DATA} *.html *.jpg *.png ${DOCSDIR} && \
+		${ECHO_MSG} "Installed HTML documentation in ${DOCSDIR}"
+.endif
 
 post-install:
 	@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@@ -165,7 +324,4 @@ post-install:
 	@${RM} -f ${PREFIX}/etc/postfix/postfix-files.bak
 	@${CAT} ${PKGMESSAGE}
 
-post-clean:
-	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
-
-.include <bsd.port.mk>
+.include <bsd.port.post.mk>
diff --git a/mail/postfix27/distinfo b/mail/postfix27/distinfo
index dd00d2fab758..356b91fe4a70 100644
--- a/mail/postfix27/distinfo
+++ b/mail/postfix27/distinfo
@@ -1,9 +1,6 @@
-MD5 (postfix/postfix-2.2.10.tar.gz) = 440a4702182a79ac2f51e8974fb742c9
-SHA256 (postfix/postfix-2.2.10.tar.gz) = 7c3f4cabd9f5bbba0c8987b0dcbafdce45a4f13b7f917bcfc6d7b3caf8ce34f1
-SIZE (postfix/postfix-2.2.10.tar.gz) = 2443513
-MD5 (postfix/postfix-libspf2-2.2.0-5.patch) = 80be36e0f14e1a1f39a3b30b9b2d4115
-SHA256 (postfix/postfix-libspf2-2.2.0-5.patch) = b43c29d3424a552ea990dca8031bd4110cb49b3ecb927f6bacc4cd1442f2dbed
-SIZE (postfix/postfix-libspf2-2.2.0-5.patch) = 26077
-MD5 (postfix/postfix-2.2.10-vda.patch.gz) = 8237cd654eb116d35785b11de6e5ca9c
-SHA256 (postfix/postfix-2.2.10-vda.patch.gz) = 32aa3f7219e3da3bda362223ee34d6571c796f601b565de1890bce628446e0cc
-SIZE (postfix/postfix-2.2.10-vda.patch.gz) = 7799
+MD5 (postfix/postfix-2.3.0.tar.gz) = 72a714e0cc8a5fdbe770359ae965e09b
+SHA256 (postfix/postfix-2.3.0.tar.gz) = 719ad43cfb032fc94272f63b0bb4bc6930bdf9b48bd539927dbe403a1d53d786
+SIZE (postfix/postfix-2.3.0.tar.gz) = 2770810
+MD5 (postfix/postfix-2.3.0-vda.patch.gz) = e29d9db6641b22f788d496912e045992
+SHA256 (postfix/postfix-2.3.0-vda.patch.gz) = c75073d9a30aa50d1911da9ce42648d25cd8d485df0724f17efdeb7bd856598d
+SIZE (postfix/postfix-2.3.0-vda.patch.gz) = 7497
diff --git a/mail/postfix27/files/patch-conf::main.cf b/mail/postfix27/files/patch-conf::main.cf
index 7e3397f23a5d..a9cb3c360058 100644
--- a/mail/postfix27/files/patch-conf::main.cf
+++ b/mail/postfix27/files/patch-conf::main.cf
@@ -1,6 +1,6 @@
---- conf/main.cf.orig	Thu Apr  6 18:26:05 2006
-+++ conf/main.cf	Thu Apr  6 18:27:10 2006
-@@ -32,13 +32,13 @@
+--- conf/main.cf.orig	Mon Mar 27 15:58:38 2006
++++ conf/main.cf	Mon Mar 27 15:59:02 2006
+@@ -33,13 +33,13 @@
  # The command_directory parameter specifies the location of all
  # postXXX commands.
  #
@@ -16,7 +16,7 @@
  
  # QUEUE AND PROCESS OWNERSHIP
  #
-@@ -237,7 +237,7 @@
+@@ -238,7 +238,7 @@
  # 
  #mynetworks_style = class
  #mynetworks_style = subnet
@@ -25,7 +25,7 @@
  
  # Alternatively, you can specify the mynetworks list by hand, in
  # which case Postfix ignores the mynetworks_style setting.
-@@ -608,37 +608,37 @@
+@@ -609,37 +609,37 @@
  # sendmail_path: The full pathname of the Postfix sendmail command.
  # This is the Sendmail-compatible mail posting interface.
  # 
diff --git a/mail/postfix27/files/patch-makedefs b/mail/postfix27/files/patch-makedefs
index b51d82fec882..a630cc9002d1 100644
--- a/mail/postfix27/files/patch-makedefs
+++ b/mail/postfix27/files/patch-makedefs
@@ -1,10 +1,12 @@
---- makedefs.orig	Tue Jan  3 19:50:25 2006
-+++ makedefs	Wed Jan  4 23:14:21 2006
-@@ -118,6 +118,8 @@
+--- makedefs.orig	Thu Mar 31 22:55:18 2005
++++ makedefs	Wed Jul 13 17:40:42 2005
+@@ -116,6 +116,10 @@
  		;;
-   FreeBSD.6*)	SYSTYPE=FREEBSD6
+   FreeBSD.5*)	SYSTYPE=FREEBSD5
  		;;
-+  FreeBSD.7*)	SYSTYPE=FREEBSD6
++  FreeBSD.6*)	SYSTYPE=FREEBSD5
++		;;
++  FreeBSD.7*)	SYSTYPE=FREEBSD5
 +		;;
    OpenBSD.2*)	SYSTYPE=OPENBSD2
  		;;
diff --git a/mail/postfix27/files/postfix.sh.in b/mail/postfix27/files/postfix.sh.in
index c44c1d84b050..f2326b56c11b 100644
--- a/mail/postfix27/files/postfix.sh.in
+++ b/mail/postfix27/files/postfix.sh.in
@@ -19,7 +19,7 @@
 . %%RC_SUBR%%
 
 name="postfix"
-rcvar=`set_rcvar`
+rcvar=${name}_enable
 
 load_rc_config $name
 
diff --git a/mail/postfix27/pkg-descr b/mail/postfix27/pkg-descr
index 1f335ce6820c..58c625e46973 100644
--- a/mail/postfix27/pkg-descr
+++ b/mail/postfix27/pkg-descr
@@ -1,6 +1,15 @@
-Postfix attempts to be fast, easy to administer, and secure, while at
-the same time being sendmail-compatible enough to not upset existing
-users. It also offers QMQP and VERP support to let Postfix act as delivery
-daemon for ezmlm-idx.
+Postfix attempts to be fast, easy to administer, and secure, while at the same
+time being sendmail compatible enough to not upset existing users. Thus, the
+outside has a sendmail-ish flavor, but the inside is completely different.
 
-WWW: http://www.postfix.org/
+Some feautures:
+
+Connection cache for SMTP, DSN status notifications, IP version 6, Plug-in
+support for multiple SASL implementations (Cyrus, Dovecot), TLS encryption and
+authentication, Configurable status notification message text, Access control
+per client/sender/recipient/etc, Content filter (built-in, external before
+queue, external after queue), Berkeley DB database, LDAP database, MySQL
+database, PostgreSQL database, Maildir and mailbox format, Virtual domains,
+VERP envelope return addresses and others.
+
+WWW:	http://www.postfix.org/
diff --git a/mail/postfix27/pkg-install b/mail/postfix27/pkg-install
index fe0c6c6f0243..9d50ad8ff1dd 100644
--- a/mail/postfix27/pkg-install
+++ b/mail/postfix27/pkg-install
@@ -63,8 +63,7 @@ if [ x"$2" = xPRE-INSTALL ]; then
 	if /usr/sbin/pw groupshow "${GROUP}" 2>/dev/null; then
 		echo "You already have a group \"${GROUP}\", so I will use it."
 	else
-		if /usr/sbin/pw groupadd ${GROUP} -g ${GID}
-		then
+		if /usr/sbin/pw groupadd ${GROUP} -g ${GID}; then
 			echo "Added group \"${GROUP}\"."
 		else
 			echo "Adding group \"${GROUP}\" failed..."
@@ -86,7 +85,7 @@ if [ x"$2" = xPRE-INSTALL ]; then
 	fi
 
 	if /usr/sbin/pw user show "${USER}" 2>/dev/null; then
-		 echo "You already have a user \"${USER}\", so I will use it."
+		echo "You already have a user \"${USER}\", so I will use it."
 	else
 		if /usr/sbin/pw useradd ${USER} -u ${UID} -g ${GROUP} -h - -d /var/spool/postfix -s ${NOLOGIN} -c "Postfix Mail System"; then
 			echo "Added user \"${USER}\"."
@@ -160,15 +159,15 @@ if [ x"$2" = xPOST-INSTALL -a -z "${PACKAGE_BUILDING}" ]; then
 	fi
 	if [ ${OSVERSION} -ge 400014 ]; then
 		if yesno "Would you like to activate Postfix in /etc/mail/mailer.conf" ${DEFAULT_REPLACE_MAILERCONF}; then
-			mv -f /etc/mail/mailer.conf /etc/mail/mailer.conf.old
-			echo "#"						>  /etc/mail/mailer.conf
-			echo -n "# Execute the Postfix sendmail program"	>> /etc/mail/mailer.conf
-			echo ", named ${PKG_PREFIX}/sbin/sendmail"		>> /etc/mail/mailer.conf
-			echo "#"						>> /etc/mail/mailer.conf
-			echo "sendmail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-			echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-			echo "mailq	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
-			echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>> /etc/mail/mailer.conf
+			/bin/mv -f /etc/mail/mailer.conf /etc/mail/mailer.conf.old
+			echo "#"						>	/etc/mail/mailer.conf
+			echo -n "# Execute the Postfix sendmail program"	>>	/etc/mail/mailer.conf
+			echo ", named ${PKG_PREFIX}/sbin/sendmail"		>>	/etc/mail/mailer.conf
+			echo "#"						>>	/etc/mail/mailer.conf
+			echo "sendmail	${PKG_PREFIX}/sbin/sendmail"	>>	/etc/mail/mailer.conf
+			echo "send-mail	${PKG_PREFIX}/sbin/sendmail"	>>	/etc/mail/mailer.conf
+			echo "mailq	${PKG_PREFIX}/sbin/sendmail"	>>	/etc/mail/mailer.conf
+			echo "newaliases	${PKG_PREFIX}/sbin/sendmail"	>>	/etc/mail/mailer.conf
 		fi
 	else
 		if yesno "Would you like to replace {sendmail,mailq,newaliases} with Postfix versions" n; then
diff --git a/mail/postfix27/pkg-message b/mail/postfix27/pkg-message
index d4bc72bd9c7d..8efe52a59817 100644
--- a/mail/postfix27/pkg-message
+++ b/mail/postfix27/pkg-message
@@ -1,4 +1,4 @@
-To enable postfix rcNG startup script please add postfix_enable="YES" in
+To enable postfix rc startup script please add postfix_enable="YES" in
 your rc.conf
 
 If you not need sendmail anymore, please add in your rc.conf:
diff --git a/mail/postfix27/pkg-plist b/mail/postfix27/pkg-plist
index 779dff1908ea..7da191de5fb8 100644
--- a/mail/postfix27/pkg-plist
+++ b/mail/postfix27/pkg-plist
@@ -10,6 +10,7 @@
 @unexec if cmp -s %D/etc/postfix/generic %D/etc/postfix/dist/generic; then rm -f %D/etc/postfix/generic; fi
 etc/postfix/LICENSE
 etc/postfix/TLS_LICENSE
+etc/postfix/bounce.cf.default
 etc/postfix/main.cf.default
 etc/postfix/makedefs.out
 etc/postfix/post-install
@@ -83,6 +84,7 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/BUILTIN_FILTER_README
 %%PORTDOCS%%%%DOCSDIR%%/BUILTIN_FILTER_README.html
 %%PORTDOCS%%%%DOCSDIR%%/CDB_README
+%%PORTDOCS%%%%DOCSDIR%%/CDB_README.html
 %%PORTDOCS%%%%DOCSDIR%%/CONNECTION_CACHE_README
 %%PORTDOCS%%%%DOCSDIR%%/CONNECTION_CACHE_README.html
 %%PORTDOCS%%%%DOCSDIR%%/CONTENT_INSPECTION_README
@@ -94,6 +96,8 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/DB_README.html
 %%PORTDOCS%%%%DOCSDIR%%/DEBUG_README
 %%PORTDOCS%%%%DOCSDIR%%/DEBUG_README.html
+%%PORTDOCS%%%%DOCSDIR%%/DSN_README
+%%PORTDOCS%%%%DOCSDIR%%/DSN_README.html
 %%PORTDOCS%%%%DOCSDIR%%/ETRN_README
 %%PORTDOCS%%%%DOCSDIR%%/ETRN_README.html
 %%PORTDOCS%%%%DOCSDIR%%/FILTER_README
@@ -102,7 +106,6 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/INSTALL.html
 %%PORTDOCS%%%%DOCSDIR%%/IPV6_README
 %%PORTDOCS%%%%DOCSDIR%%/IPV6_README.html
-%%PORTDOCS%%%%DOCSDIR%%/CDB_README.html
 %%PORTDOCS%%%%DOCSDIR%%/TLS_README
 %%PORTDOCS%%%%DOCSDIR%%/TLS_README.html
 %%PORTDOCS%%%%DOCSDIR%%/LDAP_README
@@ -115,6 +118,8 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/LOCAL_RECIPIENT_README.html
 %%PORTDOCS%%%%DOCSDIR%%/MAILDROP_README
 %%PORTDOCS%%%%DOCSDIR%%/MAILDROP_README.html
+%%PORTDOCS%%%%DOCSDIR%%/MILTER_README
+%%PORTDOCS%%%%DOCSDIR%%/MILTER_README.html
 %%PORTDOCS%%%%DOCSDIR%%/MYSQL_README
 %%PORTDOCS%%%%DOCSDIR%%/MYSQL_README.html
 %%PORTDOCS%%%%DOCSDIR%%/NFS_README
@@ -144,7 +149,6 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/SMTPD_POLICY_README.html
 %%PORTDOCS%%%%DOCSDIR%%/SMTPD_PROXY_README
 %%PORTDOCS%%%%DOCSDIR%%/SMTPD_PROXY_README.html
-%%PORTDOCS%%%%SUB_SPF%%%%DOCSDIR%%/SPF_README
 %%PORTDOCS%%%%DOCSDIR%%/STANDARD_CONFIGURATION_README
 %%PORTDOCS%%%%DOCSDIR%%/STANDARD_CONFIGURATION_README.html
 %%PORTDOCS%%%%DOCSDIR%%/TUNING_README
@@ -165,6 +169,7 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/aliases.5.html
 %%PORTDOCS%%%%DOCSDIR%%/anvil.8.html
 %%PORTDOCS%%%%DOCSDIR%%/body_checks.5.html
+%%PORTDOCS%%%%DOCSDIR%%/bounce.5.html
 %%PORTDOCS%%%%DOCSDIR%%/bounce.8.html
 %%PORTDOCS%%%%DOCSDIR%%/canonical.5.html
 %%PORTDOCS%%%%DOCSDIR%%/cidr_table.5.html
@@ -220,6 +225,7 @@ bin/mailq
 %%PORTDOCS%%%%DOCSDIR%%/smtp.8.html
 %%PORTDOCS%%%%DOCSDIR%%/smtpd.8.html
 %%PORTDOCS%%%%DOCSDIR%%/spawn.8.html
+%%PORTDOCS%%%%DOCSDIR%%/tcp_table.5.html
 %%PORTDOCS%%%%DOCSDIR%%/trace.8.html
 %%PORTDOCS%%%%DOCSDIR%%/transport.5.html
 %%PORTDOCS%%%%DOCSDIR%%/trivial-rewrite.8.html
diff --git a/mail/postfix27/scripts/configure.postfix b/mail/postfix27/scripts/configure.postfix
deleted file mode 100644
index 09def2c857a2..000000000000
--- a/mail/postfix27/scripts/configure.postfix
+++ /dev/null
@@ -1,217 +0,0 @@
-#!/bin/sh
-# $FreeBSD: /tmp/pcvs/ports/mail/postfix27/scripts/Attic/configure.postfix,v 1.75 2006-04-22 14:04:52 mnag Exp $
-
-if [ -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc ]; then
-	exit
-fi
-
-tempfile=`/usr/bin/mktemp -t checklist`
-
-if [ "${POSTFIX_OPTIONS}" ]; then
-	set ${POSTFIX_OPTIONS}
-fi
-
-for i; do
-	eval status_$i=ON
-done
-
-if [ -z "${BATCH}" ]; then
-	/usr/bin/dialog --title "Postfix configuration options" --clear \
-		--checklist "\n\
-Please select desired options:" -1 -1 16 \
-NOPCRE		"DISABLE Perl Compatible Regular Expressions" "$status_NOPCRE" \
-SASL		"Cyrus SASLv1 (Simple Authentication and Security Layer)" "$status_SASL" \
-SASL2		"Cyrus SASLv2 (Simple Authentication and Security Layer)" "$status_SASL2" \
-SASLKRB		"If your SASL requires Kerberos select this option" "$status_SASLKRB" \
-SASLKRB5	"If your SASL requires Kerberos5 select this option" "$status_SASLKRB5" \
-SASLKRB5MIT	"If your SASL requires MIT Kerberos5 select this option" "$status_SASLKRB5MIT" \
-SPF		"SPF support" "$status_SPF" \
-TLS		"SSL and TLS" "$status_TLS" \
-BDB		"Berkeley DB (select version using WITH_BDB_VER variable)" "$status_BDB" \
-MySQL		"MySQL map lookups (choose version with WITH_MYSQL_VER)" "$status_MySQL" \
-PgSQL		"PostgreSQL map lookups (choose with DEFAULT_PGSQL_VER)" "$status_PgSQL" \
-OpenLDAP	"OpenLDAP map lookups (choose ver. with WITH_OPENLDAP_VER)" "$status_OpenLDAP" \
-CDB		"CDB map lookups" "$status_CDB" \
-NIS		"NIS map lookups" "$status_NIS" \
-VDA		"VDA (Virtual Delivery Agent)" "$status_VDA" \
-Test		"SMTP/LMTP test server and generator" "$status_Test" \
-2> $tempfile
-
-	retval=$?
-
-	if [ -s $tempfile ]; then
-		set `sed 's/"//g' $tempfile`
-	fi
-	rm -f $tempfile
-
-	case $retval in
-		0)	if [ -z "$*" ]; then
-				echo "Nothing selected"
-			fi
-			;;
-		1)	echo "Cancel pressed."
-			exit 1
-			;;
-	esac
-fi
-
-${MKDIR} ${WRKDIRPREFIX}${CURDIR}
-exec > ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-
-echo "PREFIX=	${PREFIX}"
-
-SUB_TEST="@comment "
-SUB_SPF="@comment "
-
-while [ "$1" ]; do
-	case $1 in
-		NOPCRE)
-			echo "WITHOUT_PCRE=	yes"
-			echo "NOPCRE_SUFFIX=	+nopcre"
-			SUB_NOPCRE=""
-			;;
-		SASL)
-			echo "LIB_DEPENDS+=	sasl.8:\${PORTSDIR}/security/cyrus-sasl"
-			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include -I\${LOCALBASE}/include/sasl1"
-			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -lsasl -lpam -lcrypt"
-			echo "SASL_SUFFIX=	+sasl"
-			if [ -f ${LOCALBASE}/lib/libsasl.a ]; then
-				if /usr/bin/nm ${LOCALBASE}/lib/libsasl.a | grep -wq "mysql_init"; then
-					SASL_USE_MYSQL="YES"
-				fi
-			fi
-			;;
-		SASL2)
-			echo "LIB_DEPENDS+=	sasl2.2:\${PORTSDIR}/security/cyrus-sasl2"
-			echo "POSTFIX_CCARGS+=	-DUSE_SASL_AUTH -I\${LOCALBASE}/include -I\${LOCALBASE}/include/sasl"
-			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -lsasl2 -lpam -lcrypt"
-			echo "SASL_SUFFIX=	+sasl2"
-			if [ -f ${LOCALBASE}/lib/libsasl2.a ]; then
-				if /usr/bin/nm ${LOCALBASE}/lib/libsasl2.a | grep -wq "mysql_init"; then
-					SASL_USE_MYSQL="YES"
-				fi
-			fi
-			;;
-		SASLKRB)
-			echo "POSTFIX_AUXLIBS+= -lkrb -lcrypto -lcom_err"
-			;;
-		SASLKRB5)
-			echo "POSTFIX_AUXLIBS+= -lkrb5 -lcrypto -lcrypt -lcom_err -lasn1 -lroken"
-			;;
-		SASLKRB5MIT)
-			echo "LIB_DEPENDS+=	krb5.3:${PORTSDIR}/security/krb5"
-			echo "POSTFIX_AUXLIBS+= -Wl,--rpath,\$\${KRB5_HOME:-${LOCALBASE}}/lib -lkrb5 -lcrypto -lcrypt -lcom_err"
-			;;
-		SPF)
-			# see http://www.ipnet6.org/postfix/spf/
-			echo "LIB_DEPENDS+=	spf2.1:\${PORTSDIR}/mail/libspf2-10"
-			echo "PATCH_SITES+=	http://www.ipnet6.org/postfix/download/"
-			echo "PATCHFILES+=	postfix-libspf2-2.2.0-5.patch"
-			echo "PATCH_DIST_STRIP=	-p1"
-			echo "POSTFIX_CCARGS+=	-I\${LOCALBASE}/include"
-			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -lspf2"
-			echo "SPF_SUFFIX=	+spf"
-			echo ""
-			SUB_SPF=""
-			;;
-		TLS)
-			echo "USE_OPENSSL=	yes"
-			echo "POSTFIX_CCARGS+=	-DUSE_TLS -I\${OPENSSLINC}"
-			echo "POSTFIX_AUXLIBS+=	-L\${OPENSSLLIB} \${LDFLAGS} -lssl -lcrypto"
-			echo "TLS_SUFFIX=	+tls"
-			;;
-		BDB)
-			echo "USE_BDB=		yes"
-			echo "POSTFIX_CCARGS+=	-I\${BDB_INCLUDE_DIR}"
-			echo "POSTFIX_AUXLIBS+=	-L\${BDB_LIB_DIR} -l\${BDB_LIB_NAME}"
-			echo "DB_SUFFIX=	+${BDB_LIB_NAME}"
-			;;
-		MySQL)
-			echo "USE_MYSQL=YES"
-			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
-			echo "POSTFIX_AUXLIBS+= \${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz -lcrypt"
-			if [ -f ${LOCALBASE}/lib/mysql/libmysqlclient.a ]; then
-				if /usr/bin/nm ${LOCALBASE}/lib/mysql/libmysqlclient.a | grep -wq "SSL_new"; then
-					echo "USE_OPENSSL=	yes"
-					echo "POSTFIX_CCARGS+=	-I\${OPENSSLLIB}"
-					echo "POSTFIX_AUXLIBS+=	-L\${OPENSSLLIB} \${LDFLAGS} -lssl -lcrypto"
-				fi
-			fi
-			echo "MYSQL_SUFFIX=	+mysql"
-			echo "_REQUIRE+=	mysql"
-			MYSQL_SELECTED="YES"
-			;;
-		PgSQL)
-			echo "USE_PGSQL=YES"
-			echo "POSTFIX_CCARGS+=	-DHAS_PGSQL -I\${LOCALBASE}/include	-I\${LOCALBASE}/pgsql/include"
-			echo "POSTFIX_AUXLIBS+= -L\${LOCALBASE}/lib -L\${LOCALBASE}/pgsql/lib -lpq -lcrypt"
-			echo "PGSQL_SUFFIX=	+pgsql"
-			echo "_REQUIRE+=	postgresql"
-			;;
-		OpenLDAP)
-			echo "USE_OPENLDAP=YES"
-			echo "POSTFIX_CCARGS+=	-DHAS_LDAP -I\${LOCALBASE}/include"
- 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -lldap -llber"
-			echo "OPENLDAP_SUFFIX=	+openldap"
-			echo "_REQUIRE+=	slapd"
-			echo ".if defined(WITH_OPENLDAP_VER)"
-			echo "WANT_OPENLDAP_VER=\${WITH_OPENLDAP_VER}"
-			echo ".endif"
-			;;
-		CDB)
-			echo "BUILD_DEPENDS+=	\${LOCALBASE}/lib/libcdb.a:\${PORTSDIR}/databases/tinycdb"
-			echo "POSTFIX_CCARGS+=	-DHAS_CDB -I\${LOCALBASE}/include"
- 			echo "POSTFIX_AUXLIBS+=	-L\${LOCALBASE}/lib -lcdb"
-			echo "CDB_SUFFIX=	+cdb"
-			;;
-		NIS)
-			echo "POSTFIX_CCARGS+=	-DHAS_NIS"
-			echo "NIS_SUFFIX=	+nis"
-			echo "_REQUIRE+=	ypserv"
-			;;
-		VDA)
-			echo "PATCH_SITES+=	http://web.onda.com.br/nadal/postfix/VDA/"
-			echo "PATCHFILES+=	postfix-2.2.10-vda.patch.gz"
-			echo "PATCH_DIST_STRIP=	-p1"
-			;;
-		Test)
-			echo "BINTEST=		qmqp-sink qmqp-source smtp-sink smtp-source"
-			echo "MANTEST=		qmqp-sink.1 qmqp-source.1 smtp-sink.1 smtp-source.1"
-			echo "MAN1+=		\${MANTEST}"
-			SUB_TEST=""
-			;;
-		*)
-			echo "Unknown option(s): $*" > /dev/stderr
-			rm -f ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-			exit 1
-			;;
-	esac
-	shift
-done
-
-if [ -z "${BATCH}" ]; then
-	if [ "X$SASL_USE_MYSQL" != "X" ] && [ "$MYSQL_SELECTED" != "YES" ]; then
-		/usr/bin/dialog --yesno "Your lib SASL it is compiled with MySQL. It desires to use the MySQL?" 5 80 > /dev/stderr
-		if [ $? = 0 ]; then
-			echo "USE_MYSQL=YES"
-			echo "POSTFIX_CCARGS+=	-DHAS_MYSQL -I\${LOCALBASE}/include/mysql"
-			echo "POSTFIX_AUXLIBS+= \${LOCALBASE}/lib/mysql/libmysqlclient.a -lm -lz -lcrypt"
-			if [ -f ${LOCALBASE}/lib/mysql/libmysqlclient.a ]; then
-				if /usr/bin/nm ${LOCALBASE}/lib/mysql/libmysqlclient.a | grep -wq "SSL_new"; then
-					echo "USE_OPENSSL=	yes"
-					echo "POSTFIX_CCARGS+=	-I\${OPENSSLLIB}"
-					echo "POSTFIX_AUXLIBS+=	-L\${OPENSSLLIB} \${LDFLAGS} -lssl -lcrypto"
-				fi
-			fi
-		fi
-	fi
-fi
-
-echo "PLIST_SUB+=	SUB_TEST=\"${SUB_TEST}\""
-echo "PLIST_SUB+=	SUB_SPF=\"${SUB_SPF}\""
-
-# for some reason, if we alter the pkg name this way, the first build (where
-# we ask the configure questions) doesn't pick up the extensions, but
-# any subsequent build will. so "make; make install" will build twice.
-# don't do this for now.
-#echo "PKGNAMESUFFIX=	\${NOPCRE_SUFFIX}\${SASL_SUFFIX}\${DB_SUFFIX}\${MYSQL_SUFFIX}\${PGSQL_SUFFIX}\${OPENLDAP_SUFFIX}\${TLS_SUFFIX}\${NIS_SUFFIX}\${SPF_SUFFIX}"