aboutsummaryrefslogtreecommitdiffstats
path: root/mail
diff options
context:
space:
mode:
authortorstenb <torstenb@FreeBSD.org>1996-11-18 07:43:03 +0800
committertorstenb <torstenb@FreeBSD.org>1996-11-18 07:43:03 +0800
commitc788f00831e7ec772fdfe9082d38e79a3e9b056f (patch)
tree5d260f2e6eba73a2601299e98bd006e04b9e62e0 /mail
parentaa9b465af7c94a3d7a9c3ad4b8999d9f7193dc61 (diff)
downloadfreebsd-ports-gnome-c788f00831e7ec772fdfe9082d38e79a3e9b056f.tar.gz
freebsd-ports-gnome-c788f00831e7ec772fdfe9082d38e79a3e9b056f.tar.zst
freebsd-ports-gnome-c788f00831e7ec772fdfe9082d38e79a3e9b056f.zip
Upgrade to 3.2
Diffstat (limited to 'mail')
-rw-r--r--mail/smail/Makefile47
-rw-r--r--mail/smail/distinfo2
-rw-r--r--mail/smail/files/EDITME1225
-rw-r--r--mail/smail/files/freebsd2.0129
-rw-r--r--mail/smail/pkg-descr2
-rw-r--r--mail/smail/pkg-plist58
-rw-r--r--mail/smail/scripts/configure6
7 files changed, 135 insertions, 1334 deletions
diff --git a/mail/smail/Makefile b/mail/smail/Makefile
index 4e793979ad99..99e787af7e42 100644
--- a/mail/smail/Makefile
+++ b/mail/smail/Makefile
@@ -1,33 +1,54 @@
# New ports collection makefile for: smail
-# Version required: 3.1.29
+# Version required: 3.2
# Date created: 16 Oct 1994
# Whom: torstenb
#
-# $Id: Makefile,v 1.12 1996/11/10 21:32:45 obrien Exp $
+# $Id: Makefile,v 1.13 1996/11/17 07:42:56 obrien Exp $
#
-DISTNAME= smail-3.1.29.1
+DISTNAME= smail-3.2
CATEGORIES= mail
MASTER_SITES= ftp://ftp.uu.net/networking/mail/smail/
MAINTAINER= torstenb@FreeBSD.ORG
-BUILD_DEPENDS= bash:${PORTSDIR}/shells/bash
+#.if defined(USE_IDENT)
+#DEPENDS= ${PORTSDIR}/security/libident
+#.endif
+
+INSTALL_TARGET= install installman
-MAKE_FLAGS= "SHELL=${PREFIX}/bin/bash"
MAN1= pathto.1 uuwho.1 uupath.1
-MAN5= smail.5
+MAN5= smailconf.5 smail.5 smaildrct.5 smailmeth.5 smailqual.5 \
+ smailrtrs.5 smailrtry.5 smailtrns.5
MAN8= pathalias.8 mkdbm.8 mkline.8 mksort.8 mkaliases.8 smail.8 \
mkpath.8 pathmerge.8 checkerr.8 getmap.8 mkhpath.8 savelog.8 \
mkuuwho.8 mailq.8 sendmail.8 runq.8 rmail.8 rsmtp.8 smtpd.8
-pre-install:
- ${MKDIR} ${PREFIX}/lib/smail
-
post-install:
- @${INSTALL_DATA} ${WRKSRC}/samples/generic/config ${PREFIX}/lib/smail/config.sample
- @${INSTALL_DATA} ${WRKSRC}/samples/generic/directors ${PREFIX}/lib/smail/directors.sample
- @${INSTALL_DATA} ${WRKSRC}/samples/generic/routers ${PREFIX}/lib/smail/routers.sample
- @${INSTALL_DATA} ${WRKSRC}/samples/generic/transports ${PREFIX}/lib/smail/transports.sample
+ @echo "If you want to replace sendmail with links to smail, type"
+ @echo "the following command as \"root\":"
+ @echo ""
+ @echo " make replace"
+replace:
+ @echo "===> Replacing sendmail"
+.if exists(/usr/sbin/sendmail)
+ mv -f /usr/sbin/sendmail /usr/sbin/sendmail.BAK && chmod 0 \
+ /usr/sbin/sendmail && cp -fp /usr/local/bin/smail \
+ /usr/sbin/sendmail
+.endif
+.if exists(/usr/sbin/mailstats)
+ chmod 0 /usr/sbin/mailstats
+.endif
+.if exists(/usr/bin/newaliases)
+ mv -f /usr/bin/newaliases /usr/bin/newaliases.BAK && chmod 0 \
+ /usr/bin/newaliases && cp -fp /usr/local/bin/newaliases \
+ /usr/bin/newaliases
+.endif
+.if exists(/usr/bin/mailq)
+ mv -f /usr/bin/mailq /usr/bin/mailq.BAK && chmod 0 \
+ /usr/bin/mailq && cp -fp /usr/local/bin/mailq /usr/bin/mailq
+.endif
+
.include <bsd.port.mk>
diff --git a/mail/smail/distinfo b/mail/smail/distinfo
index 135685a84fec..2fab53b279d2 100644
--- a/mail/smail/distinfo
+++ b/mail/smail/distinfo
@@ -1 +1 @@
-MD5 (smail-3.1.29.1.tar.gz) = bbacbe152a5c00b1ecd875ae028100cd
+MD5 (smail-3.2.tar.gz) = 33f4c182678241350269e6b3a171abbb
diff --git a/mail/smail/files/EDITME b/mail/smail/files/EDITME
index 09115d6fa3a7..8a30852c1815 100644
--- a/mail/smail/files/EDITME
+++ b/mail/smail/files/EDITME
@@ -1,1225 +1,2 @@
-# @(#)conf/EDITME-dist 1.50 9/10/92 01:07:17
-#
-# EDITME - edit me to perform high level configuration of smail
-#
-# The EDITME file is used by makefiles to build individual defs.h,
-# defs.sh and defs.sed files, which in turn control the build/install
-# process of smail.
-#
-# The EDITME-dist file servers as a reference copy only. Patches to
-# smail will refer to EDITME-dist rather than EDITME. Only the EDITME
-# file is used in the build/install process. Any editing should be done
-# to the file EDITME, which should be located in the same directory as
-# EDITME-dist.
-#
-# The EDITME is a /bin/sh shell script. That is, comments begin with
-# the first non-quoted/non-escaped '#' character. Values are set
-# using NAME=VALUE or NAME=, with no spaces around the equal sign.
-# Values that have spaces or special shell characters should be
-# qouted and/or escaped. Consult the sh(1) man page for further details.
-#
-# Values that are indicated as optional may, in some cases, not be set.
-# All other values MUST be set to some value. The NAME= form is
-# equivalent to not setting the value, with the exception of TEST_BASE.
-#
-# An alternate path to the EDITME file can be specified through setting
-# the environment variable SMAIL_EDITME. This can either be a full
-# pathname or a relateive pathname, which will be referenced relative
-# to the smail conf directory. Care must be taken with dependencies in
-# makefiles when the path to the EDITME file has changed. If this is
-# a permanent change, then type "make depend" at the top of the smail
-# source tree. Otherwise the conf/lib/mkdefs.sh shell script can be
-# run in affected directories to create new defs files.
-
-
-# CFLAGS - the base set of flags for the cc command
-#
-# optional
-#
-# When debugging smail, it is useful to set this to "-g". Otherwise
-# "-O" is normally used to optimize the code produced.
-#
-# NOTE: I get core dumps on SCO MPX 2.0 when using the bind router (I
-# haven't tried other SCO releases). Whatever the problem is, it
-# goes away when I compile without -O. If anybody finds the cause,
-# please let me know. For now, if you get core dumps when using the
-# bind router on SCO, try compiling without -O.
-
-CFLAGS=-O2 # common
-
-# CC - the C compiler to use for compiling smail
-#
-# optional (defaults to cc)
-#
-# CAUTION: gcc does not work with smail on all architecures. In
-# particular, problems have been reported on the SunOS platform. The
-# typical problem is that gcc uses different structure-passing
-# conventions for function calls. This is a problem for a few
-# networking calls which pass around in_addr structures.
-#
-# Some conf/os files set an alternate default value for CC. In
-# particular, the SunOS CC defaults to /bin/cc, to ensure that
-# /usr/sys5/cc is not used.
-
-#CC=gcc # use the GNU C Compiler
-
-
-# LDFLAGS - flags to pass to the loader
-#
-# optional
-#
-# These flags are passed to the cc command before any object
-# modules or libraries.
-
-#LDFLAGS=-L/usr/ucblib # use an alternate directory for libs
-#LDFLAGS="-L/usr/ucblib -Bstatic" # and don't use shared libraries
-
-
-# LIBS - libraries to include in binaries
-#
-# optional
-#
-# These libraries are passed to the cc command before any libraries
-# mentioned in the conf/os file. It can be used to link in additional
-# libraries before the system libraries.
-#
-# If you wish to use the GNU dbm library, then add -lgdbm to LIBS
-# (perhaps with a -L to indicate the directory containing gdbm),
-# and then add NDBM to the HAVE variable.
-
-#LIBS=-lgdbm # use the GNU dbm library
-#LIBS="-L/usr/local/lib -lgdbm" # if gdbm is in /usr/local/lib
-#LIBS="-L/usr/local/lib -lgdbm -lalloca" # load alloca function from somewhere
-
-
-# OSLIBS - ending libraries to include in binaries
-#
-# optional
-#
-# These libraries are passed to the cc command after all other
-# libraries from any other source. For example, this can be used
-# to force the use of an alternate C library, or a shared version
-# of the C library.
-#
-# Some conf/os files already specify use of the shared C library, and
-# some necessary system libraries.
-
-#OSLIBS=-lc_s # SVR3 shared C library
-#OSLIBS="-lc_s -lcposix" # POSIX and shared C libs
-
-
-# STRIP - define this if you wish to strip binaries when installing
-#
-# optional
-#
-# The smail binaries will only be striped on installation if STRIP=yes.
-# This may save some disk space at the expence of the ability to do
-# symbolic debugging.
-
+OS_TYPE=freebsd2.0
STRIP=yes
-
-
-# USE_SYMLINKS - define this if you wish to use symlinks when installing
-#
-# optional
-#
-# The smail binaries are normally installed using hardlinks between
-# the various copies of the smail binary. Where hardlinks cannot be
-# made, real copies are made. To use symbolic links instead of
-# hard links and copies, set USE_SYMLINKS=yes. This will cause only
-# one copy of the smail binary to be installed. Do not define this
-# if your system does not have symbolic links.
-
-USE_SYMLINKS=yes
-
-
-# OS_TYPE - define the operating system type for your machine
-#
-# required
-#
-# Consult the conf/os directory for a complete list of recognized
-# operating system types. The names given below may not represent
-# all of the operating systems for which an OS description file
-# is available.
-
-#OS_TYPE=aix3.1 # IBM AIX 3.1
-#OS_TYPE=aix3.2 # IBM AIX 3.2
-#OS_TYPE=bsd4.2 # 4.2 BSD systems
-#OS_TYPE=bsd4.3 # 4.3 BSD systems
-OS_TYPE=freebsd2.0 # FreeBSD 2.0 (BSD 4.4Lite)
-#OS_TYPE=cpc3.0 # Counterpoint C-XIX Release 3.0
-#OS_TYPE=forpro # fortune FOR:Pro 2.1 to 3.1
-#OS_TYPE=sco3.2 # SCO UNIX 3.2
-#OS_TYPE=sco3.2+tcp # SCO UNIX 3.2 with SCO TCP/IP
-#OS_TYPE=sun_os3 # Sun/OS version 3.x
-#OS_TYPE=sun_os4 # Sun/OS version 4.x
-#OS_TYPE=sys5.2 # System V release 2
-#OS_TYPE=sys5.3 # System V release 3
-#OS_TYPE=sys5.4 # System V release 4
-#OS_TYPE=ultrix1.2 # DEC Ultrix release 1.2
-#OS_TYPE=unixpc3.0 # AT&T Unix PC (3b1) release 3.0
-#OS_TYPE=unixpc3.5 # AT&T Unix PC (3b1) release 3.5
-#OS_TYPE=uts1.2 # UTS/580 release 1.2
-#OS_TYPE=uts2.0 # UTS/580 release 2.0
-#OS_TYPE=xenix5 # SCO Xenix System V
-#OS_TYPE=xenix5+tcp # SCO Xenix System V with TCP/IP
-#OS_TYPE=isc2.2.1 # Interactive release 2.2.1
-#OS_TYPE=delta # Motorola delta
-#OS_TYPE=mips-bsd4.3 # MIPS Risc/OS in bsd universe
-#OS_TYPE=3b2-s5.3+win # 3b2 with SVR3.2 and WIN TCP/IP
-
-
-# ARCH_TYPE - architecture type
-#
-# required
-#
-# The ARCH_TYPE of 16bit refers to machines with 16 bit words. This
-# mode is untested. It is assumed that 16bit machines have extended
-# address spaces as smail is more than 64k bytes long.
-
-ARCH_TYPE=32bit # common
-#ARCH_TYPE=small32bit # 32 bit without reasonable VM
-#ARCH_TYPE=16bit # untested
-
-
-# DRIVER_CONFIGURATION - configuration file describing smail drivers
-#
-# optional
-#
-# By default, the os configuration file (conf/os/OS_TYPE) refers to
-# the file that describes the available director, router and transport
-# drivers.
-#
-# For example on BSD-based OS_TYPEs, the os configuration file refers to
-# a driver configuration that uses BSD networking. A BSD based system
-# could not set DRIVER_CONFIGURATION and get the BSD netwokring based
-# drivers; or a system could set DRIVER_CONFIGURATION=unix-generic and
-# disable BSD networking drivers.
-#
-# Currently few conf/os files specify the arpa-network driver
-# configuration (which includes support for the BIND server).
-# If you want to use this, you must usually set DRIVER_CONFIGURATION
-# explicitly. You may also have to add BIND to the HAVE list (later
-# in this file) to use the arpa-network driver configuration.
-#
-# IMPORTANT NOTE FOR INTERNET HOSTS
-#
-# NOTE: The bind router driver is not configured into the compiled-in
-# routers, so you will need to install a routers file to use it. Get
-# a routers file from samples/generic/routers and copy it to
-# /usr/lib/smail. Comment out the first version of inet_hosts from
-# that file, and uncomment the second (the bind version) of the
-# router. You may also want to uncomment the forcepaths router, if
-# you forward for any hosts in the UUCP zone.
-
-#DRIVER_CONFIGURATION=unix-generic # no BSD networking
-#DRIVER_CONFIGURATION=$ROOT/mydriver.cf # customized configuration
-#DRIVER_CONFIGURATION=arpa-network # include bind router
-
-
-# LMAIL - where the real /bin/mail resides
-#
-# optional
-#
-# On many System V machines, the /bin/mail program will deliver what
-# it thinks is local mail directly into user mailboxes, and may also
-# call uucp, or some other remote delivery mechanism. The /bin/mail
-# program will therefore can bypass smail.
-#
-# A solution to this program is to move the /bin/mail supplied with
-# your system to another name, LMAIL, and to then install the binmail
-# program, in pd/binmail as /bin/mail. If binmail is invoked to read
-# mail, the LMAIL (old /bin/mail) is called, otherwise SMAIL is called
-# to deliver mail.
-#
-# If LMAIL is defined below and the specified file does not exist,
-# then the binmail makefile install rule will attempt to move
-# /bin/mail to LMAIL and then copy binmail into /bin/mail. If LMAIL
-# is defined and the file LMAIL does exist, then the binmail
-# makefile will refuse to install binmail.
-#
-# If LMAIL is not defined then /bin/mail is not touched.
-#
-# NOTE: due to potential problems or confusion with binmail
-# installation, binmail is not automatically built and installed
-# from higher level makefiles. One must go to the pd/binmail
-# directory and "make install" explicitly.
-
-#LMAIL=/bin/lmail # standard System V
-
-
-# MISC_DEFINES - miscellaneous definitions
-#
-# optional
-#
-# A colon-separated list that names miscellaneous macros to define
-# for C programs and shell scripts. Each entry in the list can be
-# a simple name, or the name can be followed by an equal sign to
-# provide a value. For example:
-#
-# MISC_DEFINES="void=int:DECLARE_UTIMBUF:NO_FORWARDTO_FILE"
-#
-# Defines void to be int for compilers that do not correctly support
-# the void type, and declares the macro DECLARE_UTIMBUF, so that smail
-# will not try to get the utimbuf structure from a header file.
-#
-#
-# IMPORTANT FOR INTERACTIVE UNIX USERS:
-#
-# Some versions of Interactive UNIX have a <sys/socket.h> header
-# file that directly includes the <time.h> header file, which is
-# not protected against multiple inclusion. If your system has
-# this problem, you will encounter a multiple declaration problem
-# when compiling src/modes.o. To repair the situation, use:
-#
-# MISC_DEFINES=ISC_SOCKET_TIME_BUG
-#
-#
-# IMPORTANT FOR BSD AND SUNOS USERS:
-#
-# Some mail readers compare access and modify times to determine
-# whether mail has been delivered which has not been read. The local
-# mail transport (using the appendfile driver) preserves access time
-# for files so that this will work. However, if smail is configured
-# to use the System V convention of reading forwarding information
-# from user mailbox files, then this will be defeated (the forwardto
-# director does not preserve access times).
-#
-# Since BSD systems (and System V systems running Smail) have little
-# reason to use the System V forwarding convention, it is sufficient
-# to disable it. To disable the System V forwarding convention, add
-# NO_FORWARDTO_FILE to MISC_DEFINES.
-#
-#
-# IMPORTANT FOR USERS OF OLD BIND RELEASES
-#
-# The bind resolver can make use of features in newer releases of
-# BIND (named). In particular, it will use the res_search function,
-# rather than older res_mkquery function. If you do not have the
-# new BIND release (e.g., res_search is listed as an undefined
-# variable when you link smail), then add OBSOLETE_RESOLVER to
-# MISC_DEFINES. Also, the res_search function does not appear to
-# interract correctly with the 'defnames' attribute to the bind
-# driver, on some versions of the resolv library, so beware. If bind
-# doesn't work for you, try defining OBSOLETE_RESOLVER.
-#
-#
-# IMPORTANT FOR USERS OF SOME SEQUENT OS RELEASES
-#
-# Some releases of the Sequent C compiler recognize private as a keyword.
-# However, smail uses this as a variable or structure name in several
-# places. To get around this problem use:
-#
-# MISC_DEFINES=private=smail_private_tag
-#
-#
-# IMPORTANT FOR NON-POSIX OPERATING SYSTEMS
-#
-# Smail uses the utime() system call to set file times in a few places.
-# All U*IX releases appear to support this call, although not all
-# systems define the structure (utimbuf) used as an argument to the
-# call. In particular, true 4.2 and 4.3BSD do not declare this
-# structure (at least not the original, non-POSIX, 4.3BSD release).
-#
-# The bsd4.2 and bsd4.3 conf/os files define DECLARE_UTIMBUF to cause
-# smail itself to define this structure. However, this may fail if
-# your system is extended to define the utimbuf structure in an
-# incompatible fashion. This can be disabled by defining
-# NO_DECLARE_UTIMBUF in MISC_DEFINES.
-#
-# For other operating systems, you may need to add DECLARE_UTIMBUF
-# in MISC_DEFINES. Some releases of Interactive U*IX require this.
-# Other releases don't (I don't have a list).
-#
-#
-# IMPORTANT FOR USERS OF GCC ON NON-ANSI C SYSTEMS
-#
-# If you are using a C compiler that defines __STDC__ (such as gcc) but
-# you are running into problems due to non-ANSI #include files or missing
-# ANSI definitions, then you can define NO_ANSI_C.
-
-#MISC_DEFINES=ISC_SOCKET_TIME_BUG
-#MISC_DEFINES=NO_FORWARDTO_FILE # recommended for BSD systems
-#MISC_DEFINES=ISC_SOCKET_TIME_BUG:NO_FORWARDTO_FILE
-#MISC_DEFINES=OBSOLETE_RESOLVER
-#MISC_DEFINES=DECLARE_UTIMBUF # if smail must define utimbuf struct
-#MISC_DEFINES=NO_DECLARE_UTIMBUF # if smail must _not_ define utimbuf
-#MISC_DEFINES=private=smail_private_tag # for sequent
-#MISC_DEFINES=NO_ANSI_C # don't believe __STDC__
-
-
-# HAVE - miscellaneous supported features
-#
-# optional
-#
-# A colon-separated list of features that the local system supports
-# in addition to those defined in the OS configuration file. Some
-# interesting features you might want to list are:
-#
-# NDBM - this system supports the new DBM library
-# functions introduced in 4.3BSD.
-# DBM - this system supports the old DBM library
-# distributed with older BSD systems and
-# many System V systems. This *requires* the
-# dbmclose() function, which does not exist
-# in most historic dbm implementations.
-# HDB_UUCP - this system uses HoneyDanBer UUCP, rather
-# than a traditional version of UUCP.
-# NIALIAS - aliases with NeXT NetInfo databases.
-# BIND - the system supports the bind resolver library
-#
-# Defining NDBM or DBM may require the specification of additional
-# libraries, in LIBS or in OSLIBS. See conf/os/template for a more
-# complete list of recognized features, and for more detailed
-# descriptions. If neither NDBM or DBM is specified, Ozan Yigit's
-# sdbm (an ndbm workalike) will be used.
-#
-# CAUTION: The HoneyDanBer UUCP in System V Release 4.0 uses multi-
-# letter message grade values, rather than the traditional
-# single-letter message grades in earlier versions. Smail
-# presumes that message grades are single letters, so Smail and
-# the default grades for SVR4.0 are incompatible.
-#
-# As a result of this incompatiblity, either HDB_UUCP must not
-# be defined with SVR4.0, or the message grades that smail
-# uses will have to be added to the file /etc/uucp/Grades.
-# The list of grades that smail will use is specified in the
-# grades variable (whose default value can be specified by
-# setting GRADES in this file). Grades are specified by
-# providing a longer string in the Precedence: field. The
-# grade letters for the default value of GRADES are:
-#
-# 9 - special-delivery
-# A - air-mail
-# C - first-class (also the default message grade)
-# a - bulk
-# n - junk
-#
-# To add the default letters, you might add the following lines
-# to /etc/uucp/Grades:
-#
-# 9 9 Any User Any
-# A A Any User Any
-# C C Any User Any
-# a a Any User Any
-# n n Any User Any
-
-#HAVE=HDB_UUCP # have HoneyDanBer UUCP
-#HAVE=NDBM # have the new DBM functions
-#HAVE=DBM # have the old DBM functions
-#HAVE=HDB_UUCP:NDBM # new DBM and HoneyDanBer UUCP
-
-# UUCP_ZONE - this host is within the UUCP zone
-#
-# optional (defaults to undefined)
-#
-# Smail supports both strictly compliant SMTP transfers, and a
-# modification the the SMTP protocol for use within the UUCP zone.
-# The modified protocol transmits sender and recipient addresses in
-# accordance with the RFC976 specification, and provides behavior that
-# is more likely to work with other mailers in the UUCP zone.
-# Transferring mail using SMTP over private IP networks can work well
-# within the UUCP zone, except for the fact that the SMTP
-# specification doesn't work as well in the presence of generated
-# UUCP-zone routes form path files.
-#
-# The built-in smail transport definitions include transport
-# definitions that provide either behavior: inet_zone_smtp and
-# uucp_zone_smtp. The first provides conformant behavior and should
-# be used when transferring mail to sites on the Internet. The
-# second, uucp_zone_smtp, provides the modified protocol.
-#
-# An additional builtin transport protocol, smtp, is defined as having
-# the same behavior as inet_zone_smtp or uucp_zone_smtp, depending
-# upon whether UUCP_ZONE is set. To make the the basic smtp transport
-# use the modified behavior for the UUCP zone, set UUCP_ZONE to true.
-#
-# In the presence of generated routes from paths files, the
-# Internet-zone version of the SMTP transport will generate route-addr
-# addresses. The introduction of RFC1123 removes the requirement that
-# route-addrs work as routes, preferring instead the use of the %
-# operator for routing. Intermixed % and ! operators, particularly in
-# the presence of an @ operator (e.g., veritas!mitsu%tron@apple.com),
-# are sufficiently ambiguous that it is undesirable to use with ! or %
-# operators for routing when strict SMTP compliance is needed. This
-# is one of the motivations for introducing the modified UUCP-zone
-# protocol. However, generating route-addr addresses works well for
-# transferring mail between nodes running Smail 3.1.
-#
-# NOTE: the UUCP_ZONE flag does not affect the batched SMTP transports
-# that operate through UUCP. The uusmtp and demand_uusmtp transports
-# always operate with the modified UUCP-zone protocol. Two additional
-# transports, inet_uusmtp and inet_demand_uusmtp use compliant
-# protocols.
-
-#UUCP_ZONE=true # this site is in the UUCP zone
-#UUCP_ZONE= # this site is on the Internet
-
-
-# HOSTNAMES - names for the local host
-#
-# optional
-#
-# The HOSTNAMES value is a colon-separated list of names your system.
-# This does not need to include the name given by UUCP_NAME. If
-# HOSTNAMES is set, then the first name in the list will be used as the
-# canonical name of your system. That is, the name by which your
-# machine can be uniquely named across all networks.
-#
-# Normally HOSTNAMES is not set. In this case the HOSTNAMES value will
-# be computed at run-time from the DOMAINS value and the system-dependently
-# computed name of your system.
-#
-# If you are registered in a domain, you might consider seting HOSTNAMES
-# to a list such as: sitename.subdom.dom:sitename.dom:sitename.uucp
-#
-# NOTE: It is preferable, in most circumstances, to set the hostnames
-# variable in /usr/lib/smail/config, rather than setting HOSTNAMES
-# in this file. The value of the "hostnames" variable in the config
-# file can be changed without recompiling smail.
-
-#HOSTNAMES=kgbvax.ussr.comm:kgbvax.uucp # example only
-
-
-# DOMAINS - domains under which the local host resides
-#
-# optional (except when HOSTNAMES is not set)
-#
-# If HOSTNAMES is not defined, then HOSTNAMES is computed by concatenating
-# local host's actual name with each name in this colon-separated list of
-# domain names. This computation is done at run-time.
-#
-# Example: if DOMAINS="uts.amdahl.com:uucp", then the HOSTNAMES value
-# for the site "amdahl" would become "amdahl.uts.amdahl.com:amdahl.uucp".
-#
-# NOTE: The uucp domain is not meaningful in any standard way, though
-# many sites treat this as implying any site that is registered
-# in the UUCP zone through the USENET maps. Sites that really
-# wish to be able to receive mail from anywhere in the world
-# should get a registered domain.
-#
-# NOTE: It is preferable, in most circumstances, to set the domains
-# variable in /usr/lib/smail/config, rather than setting DOMAINS
-# in this file. The value of the "domains" variable in the config
-# file can be changed without recompiling smail.
-
-#DOMAINS=uucp # common
-#DOMAINS=ussr.comm:uucp # example only
-
-
-# UUCP_NAME - name for the local host on the UUCP network
-#
-# optional
-#
-# This should be set to the name of the local host as known by the
-# UUCP software.
-#
-# Normally, no value is given for this variable, in which case the
-# value will be computed by smail at run-time from the actual name for
-# local host, as computed in a system-dependent fashion.
-#
-# NOTE: It is preferable, in most circumstances, to set the uucp_name
-# variable in /usr/lib/smail/config, rather than setting UUCP_NAME
-# in this file. The value of the "uucp_name" variable in the config
-# file can be changed without recompiling smail.
-
-#UUCP_NAME=kgbvax # example only
-
-
-# VISIBLE_NAME - local host name used in outgoing addresses
-#
-# optional
-#
-# Some installations may wish to hide a group of machines under a common
-# name. For example, at Amdahl, we may wish to hide the machines on our
-# ethernet under the domain "uts.amdahl.com". If we set the value
-# VISIBLE_NAME="uts.amdahl.com" on the machine "futatsu", then mail
-# from "futatsu" sent as if it came from "user@uts.amdahl.com" rather than
-# "user@futatsu.uts.amdahl.com". Of course, the "uts.amdahl.com" gateways
-# will need to forward mail to "user", however the fact that a user
-# does not have check for mail on all machines on the network is useful.
-#
-# The VISIBLE_NAME value will not be recognized as a name for the local
-# host unless it is also included in one of the other lists of names for
-# the local host.
-#
-# NOTE: It is preferable, in most circumstances, to set the visible_name
-# variable in /usr/lib/smail/config, rather than setting VISIBLE_NAME
-# in this file. The value of the "visible_name" variable in the config
-# file can be changed without recompiling smail.
-
-#VISIBLE_NAME=kgbvax.uucp # example only
-
-
-# GATEWAY_NAMES - more names for the local host
-#
-# optional
-#
-# It is often important that hosts which are domain gateways recognize
-# the domain names as alternate names for the local host. These names
-# should be defined in addition to those computed automatically from
-# the actual name for the local host by putting them in GATEWAY_NAMES.
-#
-# This variable is a colon-separated list of names for the local host
-# which is not computed from the actual name for the local host.
-#
-# NOTE: It is preferable, in most circumstances, to set the gateway_names
-# variable in /usr/lib/smail/config, rather than setting GATEWAY_NAMES
-# in this file. The value of the "gateway_names" variable in the config
-# file can be changed without recompiling smail.
-
-#GATEWAY_NAMES=moscow.ussr.comm:ussr.comm:comm # example only
-
-
-# AUTH_DOMAINS - domains for which this host is authoritative
-#
-# optional (defaults to none)
-#
-# If this host contains all routing information needed for a particular
-# set of domains, then smail should generate an error if it is given a
-# hostname that is not resolved, but is within one of those domains.
-# Normally, this isn't a problem because mail that is not matched by
-# any routers generates a "host not found" error. However, the
-# smarthost router can upset this by matching any hostname. Without
-# something to generate an error, a mail loop can occur where mail
-# is sent to a host that controls a domain, and that host sends mail
-# to another host listed as the "smarthost", which sends it back.
-#
-# A host which contains all routing information for a domain is called
-# "authoritative" for that domain. A host can be authoritative for
-# any number of domains. To declare this host to be authoritative
-# for this domain, set AUTH_DOMAINS here (or auth_domains in the
-# /usr/lib/smail/config file) to a colon-separated list of domains.
-# This will prevent the smarthost router from matching any hosts within
-# the indicated domains.
-#
-# NOTE: It is preferable, in most circumstances, to set the auth_domains
-# variable in /usr/lib/smail/config, rather than setting AUTH_DOMAINS
-# in this file. The value of the "auth_domains" variable in the config
-# file can be changed without recompiling smail.
-
-#AUTH_DOMAINS=ussr.com
-#AUTH_DOMAINS=veritas.com:tolerant.com
-
-
-# POSTMASTER - the default address for the mail administrator
-#
-# optional (defaults to root)
-#
-# This address is used by smail as a last resort in trying to deliver
-# to the address "postmaster". Normally, "postmaster" is aliased to a
-# responsible person, or persons through the alias file. In the event
-# that no alias file exists, or that "postmaster" was not found in
-# that file or by any other directors, the default address will be
-# used.
-
-#POSTMASTER=root
-
-
-# NOBODY - a user with few access capabilities
-#
-# optional
-#
-# The user named here will be used by smail whenever a user ID is
-# desired that cannot do any more damange than any unpriveledged user
-# on the system. Under 4.3BSD and SunOS, this would be the user named
-# "nobody". Under other operating systems, it may be reasonable to
-# create a "nobody" entry in the passwd file. Some systems have a
-# user such as "unknown" which will suffice.
-#
-# If this is not defined, then a default will be chosen. This default
-# is os-type dependent, and is commonly nobody for BSD- and sun-derived
-# systems.
-
-NOBODY=nobody
-#NOBODY=unknown # some sites have this in their passwd file
-
-
-# TEST_BASE - directory where smail test files are kept
-#
-# optional (special when defined to an empty string)
-#
-# When testing smail, it is convenient to put binaries and configuration
-# files in an area separated from the actual installation areas. The
-# TEST_BASE directory defines this alternate area. Smail will assume
-# assume a fixed hierarchy below this directory, with a "bin" subdirectory
-# containing the smail binary and utilities, a "lib" directory containing
-# smail configuration files, and a "spool" directory containing smail
-# spool files.
-#
-# If no TEST_BASE is defined, then this facility is turned off. If a
-# TEST_BASE is defined to be an empty string, then all programs will be
-# used in the area where they are compiled, LIB_DIR will be set to the
-# "lib" directory under the root of the smail source tree, and SPOOL_DIRS
-# will be set to the "spool" directory under the root of the smail source
-# tree. In this case, a "make install" is not required.
-#
-# If a TEST_BASE is defined as a relative path (e.g. "."), then it is
-# defined relative to the root of the smail source directory.
-
-#TEST_BASE=/usr/project/smail
-#TEST_BASE=test
-#TEST_BASE= # use progs in source area
-
-
-# SMAIL_BIN_DIR - directory where copies of the smail binary are kept
-#
-# optional
-#
-# The Smail program comes in user callable names: smail, uupath,
-# pathto, optto, and so on. A copy of smail will be linked to files
-# under SMAIL_BIN_DIR. The SMAIL_BIN_DIR should be a directory
-# that is commonly in users search path (i.e., $PATH).
-
-SMAIL_BIN_DIR=!!PREFIX!!/bin # BSD local convention
-
-# SMAIL_NAME - file where the primary working copy of smail is located
-#
-# optional
-#
-# Any program that needs to call smail, including smail itself will
-# attempt to execute the program named by SMAIL_NAME.
-#
-# Often the primary working copy of smail is /usr/lib/sendmail. This
-# should be used for systems that used to run sendmail. Programs such
-# as Berkeley Mail, System V mailx or /bin/mail can be made to, or do
-# call /usr/lib/sendmail for mailer activity. It is common for public
-# domain programs to expect a mailer to exist under this name, also.
-#
-# If SMAIL_NAME is not defined here, or is set to a null string, then
-# $SMAIL_BIN_DIR/smail is used instead. If this is the name that you
-# want to use as the primary binary pathname, then do set SMAIL_NAME
-# to the null string. This will prevent the smail src/Makefile from
-# installing it as $SMAIL_BIN_DIR/smail twice.
-
-#SMAIL_NAME=/usr/lib/sendmail # common convention
-#SMAIL_NAME= # use smail in bin directory
-
-
-# OTHER_SMAIL_NAMES - other names under which to install smail
-#
-# optional
-#
-# Many systems will wish to install smail as /bin/rmail to catch mail
-# coming in over UUCP directly with smail. To install under this
-# name set OTHER_SMAIL_NAMES to /bin/rmail. As implied by the name,
-# other pathnames can be specified as well, if a system has other
-# potential rendezvous points for mail. This should be a colon or
-# white-space separated list of full pathnames.
-#
-# Users of XENIX may wish to use smail as their execmail interface.
-# To do this, add /usr/lib/mail/execmail to this list.
-#
-# This is assumed to be empty when TEST_DIR is defined.
-#
-# NOTE: A pathname CANNOT be in both SMAIL_NAME and OTHER_SMAIL_NAMES.
-
-OTHER_SMAIL_NAMES=!!PREFIX!!/bin/rmail
-
-# LIB_DIR - directory where various smail files are found
-#
-# required
-#
-# The LIB_DIR is where various static smail files reside, by default.
-# Files which may reside under this directory are: the primary config
-# file, the directors, routers and transports files, an aliases file,
-# pathalias database, uuwho database, and the COPYING file.
-#
-# The common subdirectories under LIB_DIR are: "methods", where method
-# files are by default found; "maps", where local pathalias files,
-# mkmap configuration files and the getmap batch file are located;
-# and "lists" where mailing lists are commonly located.
-#
-# It should be noted that none of these files, except for COPYING,
-# is required by the smail binary as it is released. See smail(5)
-# and smail(8) for more details on this and related topics.
-
-LIB_DIR=!!PREFIX!!/lib/smail
-
-
-# UTIL_BIN_DIR - directory where smail utilities are located
-#
-# required
-#
-# The smail system has a number of programs such as pathalias, mkline,
-# mksort, mkdbm that users normally need not execute directly. Such
-# utilities will be placed under the UTIL_BIN_DIR directory.
-#
-# UTIL_BIN_DIR is often the same as LIB_DIR.
-
-UTIL_BIN_DIR=$LIB_DIR/util
-
-
-# NEWALIASES - alternate pathname for mkaliases program
-#
-# optional
-#
-# For compatibility with sendmail, mkaliases can be installed under
-# a name such as /usr/ucb/newaliases, or /usr/lib/newaliases. To setup
-# smail to perform this installation, set NEWALIASES to the desired full
-# pathname. When testing, this is set to the empty string, signifying
-# that mkaliases will be installed only under the name mkaliases.
-
-NEWALIASES=$UTIL_BIN_DIR/newaliases
-
-# SECOND_CONFIG_FILE - pathname of an alternate config file
-#
-# optional
-#
-# Smail allows one to have a second set of configuration files that can
-# override both the compiled in and the optional primary config file.
-# Normally, the path to this secondary configuration file is defined
-# in the primary smail configuration file. However the value
-# SECOND_CONFIG_FILE can be the filename of the secondary (alternate)
-# config file. In the case where both this value, and where the
-# LIB_DIR/config file specifies a "second_config_file" value, the
-# LIB_DIR/config file takes presidence.
-#
-# A secondary configuration file is useful in an environment with
-# distributed filesystems. In such an environment, the regular config
-# directory can be maintained centrally on a remotely mounted
-# filesystem. Individual machines, can then setup a secondary
-# configuration file which overrides these centrally maintained files
-# for specific purposes.
-
-# For example, in a network with one gateway to the outside world,
-# all could share the same smail binaries and standard configuration.
-# However the the gateway machine could have a secondary configuration
-# file which so that the gateway's the smail setup has greater intelligence
-# and thus act as a smart_user and smart_path host.
-
-SECOND_CONFIG_FILE= # common for non-NFS systems
-#SECOND_CONFIG_FILE=/private/usr/lib/smail # convention for NFS systems
-
-
-# PATHS_FILE, PATHS_TYPE - location and type of the paths database
-#
-# optional
-#
-# If PATH_FILE begins with a '/', then it is the name of the optional
-# pathalias database, otherwise it is assumed that PATH_FILE refers to
-# a file under the LIB_DIR directory.
-#
-# For use with YP, it may be more convenient to use the "yp" type,
-# rather than "aliasyp", because this way a paths file can be maintained
-# in a format compatible with other YP maps.
-#
-# If PATHS_FILE is left undefined, no paths file is defined in the
-# preloaded smail configuration.
-
-PATHS_FILE=paths # for file under LIB_DIR
-#PATHS_FILE=mail.paths # YP (NIS)
-
-#PATHS_TYPE=dbm # indexed
-#PATHS_TYPE=bsearch # sorted
-PATHS_TYPE=lsearch # linear search
-#PATHS_TYPE=yp # YP (NIS)
-
-# ALIASES_FILE, ALIASES_TYPE - location and type of the aliases database
-#
-# optional
-#
-# If ALIASES_FILE begins with a '/', then it is the full pathname of the
-# optional aliases database, otherwise it is assumed that ALIASES_FILE
-# refers to a file under the LIB_DIR directory.
-#
-# For use with YP, it may be more convenient to use the "yp" type,
-# rather than "aliasyp", because this way an alias file can be maintained
-# in a format compatible with other YP maps.
-#
-# NOTE: If ALIASES_TYPE is specified as bsearch, then the suffix .sort
-# will be appended to the filename given in ALIASES_FILE. The
-# mkaliases command will then treat a file without that suffix
-# as the unsorted source file for the database.
-#
-# If ALIASES_FILE is left undefined, no aliases file is defined in the
-# preloaded smail configuration.
-#
-# NOTE FOR AIX SYSTEMS:
-# I have received reports that AIX3.1 requires use of "yp",
-# rather than "aliasyp". If this is true, I don't quite see
-# how Suns and RS/6000s running sendmail can share the same
-# YP maps. In any case, use whatever works in your
-# environment.
-
-ALIASES_FILE=$LIB_DIR/aliases # compatible with sendmail
-#ALIASES_FILE=aliases # for file under LIB_DIR
-#ALIASES_FILE=mail.aliases # YP (NIS)
-#ALIASES_FILE=NetInfo # for NeXT NetInfo aliases
-
-ALIASES_TYPE=dbm # compatible with sendmail
-#ALIASES_TYPE=lsearch # for sites without dbm(3x)
-#ALIASES_TYPE=bsearch # for sorted files, faster
-#ALIASES_TYPE=aliasyp # YP (NIS)
-#ALIASES_TYPE=nialias # for NeXT NetInfo aliases
-
-
-# ALIASES_REMOVE_SENDER - remove the sender (by default) from alias expansions
-# LISTS_REMOVE_SENDER - remove the sender (by default) from list expansions
-#
-# optional
-#
-# For compatibility with sendmail, smail can be configured to remove the
-# sender of a message (if the sender is a local user) from alias
-# expansions. Users can disable this feature by invoking smail with
-# the -m flag, typically by setting "metoo" in their .mailrc file.
-#
-# However, many people find this behavior confusing and some administrators
-# would prefer to disable this "sender removal" feature altogether.
-# Also, it has recently been noticed that smail's sender removal
-# behavior is not quite sendmail-compatible with regards to nested
-# aliases and have been surprised by the results of aliasing.
-#
-# Smail supports two forms of aliasing to which sender removal can be
-# applied: the regular aliases file (defined by ALIASES_FILE above), and
-# a directory of mailing lists (typically /usr/lib/smail/lists) where
-# all files in that directory define a list. A site that has converted
-# entirely over to smail3 can use alias files strictly for username
-# aliasing, while using the lists directory for real mailing lists. With
-# such a usage model, sender removal should be disabled for the alias
-# file, but can be enabled (depending upon preference) for the lists
-# directory.
-#
-# To enable sender removal, set ALIASES_REMOVE_SENDER or LISTS_REMOVE_SENDER
-# (depending upon preference) to "yes". If these values are empty, or are
-# note defined, then sender removal is disabled.
-#
-# This behavior can be configured using the run-time directors configuration
-# file by setting the "sender_okay" flag, to indicate that sender removal
-# should NOT be done.
-
-#ALIASES_REMOVE_SENDER=yes
-LISTS_REMOVE_SENDER=yes
-
-
-# RETRY_INTERVAL - minimum per-host retry interval for TCP/IP delivery
-# RETRY_DURATION - maximum time to keep messages in the input queue
-#
-# optional (RETRY_INTERVAL defaults to 10 minutes, RETRY_DURATION to 5 days)
-#
-# Messages to hosts on TCP/IP networks may block for quite some time, if
-# the recipient host is down, or some intervening network is inoperative.
-# Connections to such unreachable or downed hosts can block for quite
-# some time until a timeout indicates indicates that the condition
-# exists.
-#
-# To prevent the mail queue from blocking repeatedly on the same set of
-# unreachable hosts, smail keeps a directory of files that store the
-# last connection failure encountered for each host. Message deliveries
-# to a host that has failed recently will be deferred until a certain
-# period of time (the retry interval) has elapsed, preventing queue runs
-# from hanging again immediately.
-#
-# If a host is down for an extended period of time (such as forever),
-# then sending a message to the message sender is preferable to keeping
-# the message in our mail queue. If message deliveries to a particular
-# host have not succeeded within a particular length of time (the retry
-# duration), smail considers delivery to have failed, and sends a bounce
-# notification to the sender or address owner.
-#
-# Retry durations and intervals for specific hosts or domains can be
-# defined by creating a retry file in $LIB_DIR and adding lines of
-# the form:
-#
-# hostname duration/interval
-# *.domain duration/interval
-#
-# A default can be added at the end of this file with:
-#
-# * duration/interval
-#
-# Alternately, a default can be specified by setting RETRY_INTERVAL
-# and RETRY_DURATION in this file. Both values are in seconds. To
-# help in calculating, 1 day is 86400 seconds. You can actually
-# use C constant expressions here, if you want to use addition or
-# multiplication.
-#
-# These values can also be set using the retry_interval and
-# retry_duration variables in $LIB_DIR/config. In the config file
-# and in the retry file, times can be specified with suffixes, such
-# as 'm', 'h', or 'd' to indicate minutes, hours, or days. For
-# example:
-#
-# *.uu.net 3d/10m
-
-RETRY_INTERVAL=600 # 10 minutes
-#RETRY_INTERVAL='20*60' # 20 minutes
-RETRY_DURATION='86400*5' # 5 days
-#RETRY_DURATION='86400*14' # 2 weeks
-
-
-# UUCP_SYSTEM_FILE - path to UUCP file containing remote systems
-#
-# optional
-#
-# The normal smail configuration defines a router that scans the
-# output of the /usr/bin/uuname command for neighboring UUCP sites.
-# When smail is running as a daemon, it can cache the output of uuname
-# so that the uuname command need not be executed for each mail
-# message. In order to be able to detect when the output of uuname
-# will change, smail daemons will stat the UUCP configuration file
-# which contains the names of neighboring hosts. This EDITME variable
-# defines the full pathname to this file. If this variable is not
-# defined, then the output of the uuname will not be cached.
-#
-# NOTE: Many OS files specify the correct file for this, though some
-# don't. Also, if you add HoneyDanBer UUCP to a system that
-# does not normally have it, then you will need to set this.
-
-#UUCP_SYSTEM_FILE=/usr/lib/uucp/L.sys # use this for normal UUCP
-#UUCP_SYSTEM_FILE=/usr/lib/uucp/Systems # use this for HoneyDanBer UUCP
-#UUCP_SYSTEM_FILE=/etc/uucp/Systems # for System V Release 4
-
-
-# SPOOL_DIRS - smail spooling directories
-#
-# required
-#
-# Smail can use one or more spooling directories, where spool directories
-# other than the first are used if earlier spool directories were
-# inaccessible or were on file systems which filled up. The list of spool
-# directories should be colon-separated and may contain only one spool
-# directory if desired.
-
-SPOOL_DIRS=/var/spool/smail # common
-#SPOOL_DIRS=/var/spool/smail # for System V Release 4
-#SPOOL_DIRS=/usr/spool/smail:/usr2/spool/smail # use of alternate filesystem
-#SPOOL_DIRS=/usr/smail/spool # I use this right now
-#SPOOL_DIRS=/var/smail/spool # Another alternative
-
-
-# LOG_DIR - smail logging directory
-#
-# optional (defaults to (more or less) $SPOOL_DIRS/log)
-#
-# Smail creates two log files in this directory: logfile and paniclog.
-# The first is a file that logs all incoming messages and deliveries,
-# plus many errors. The second file (paniclog) logs important system
-# errors that smail can manage to write into the log file.
-
-#LOG_DIR=/usr/spool/smail/log # common
-LOG_DIR=/var/spool/smail/log # for System V Release 4
-#LOG_DIR=/usr/smail/log # I use this right now
-#LOG_DIR=/var/smail/log # Another alternative
-
-
-# UNSHAR_MAP_DIR - where unshared USENET map files are to be placed
-#
-# optional
-#
-# The getmap utility will read a list of files on the file
-# LIB_DIR/map/batch, and using unsharmap unshar these maps into the
-# UNSHAR_MAP_DIR directory.
-#
-# A common way that maps are distributed is through the USENET news group
-# "comp.mail.maps". A sys file line of:
-#
-# usenet-maps:comp.mail.maps,world:F:<UNSHAR_MAP_DIR>/work/batch
-#
-# will add names into the UNSHAR_MAP_DIR/work/batch file for getmap to
-# process.
-#
-# If UNSHAR_MAP_DIR is not defined, then the getmap and uuwho utilities
-# will not function.
-
-UNSHAR_MAP_DIR=/var/spool/uumaps
-#UNSHAR_MAP_DIR=/var/spool/uumaps # for System V Release 4
-
-
-# NEWS_SPOOL_DIR - where news articles are stored
-#
-# optional (defaults to /usr/spool/news)
-#
-# C News stores pathnames in the batch file that are relative to
-# the top-level of the news article directory hierarchy. Smail needs
-# to know the name of this directory in order to be able to extract
-# the news articles from comp.mail.maps.
-
-#NEWS_SPOOL_DIR=/usr/spool/news
-NEWS_SPOOL_DIR=/var/spool/news
-
-
-# UUWHO_FILE - file used to store the uuwho file
-#
-# optional (defaults to $LIB_DIR/uuwho)
-#
-# This specified the file used to store the host database generated by
-# and used by the uuwho command. If the uuwho database is stored in a
-# DBM file, then UUWHO_FILE is the file prefix before adding the .pag
-# and .dir suffixes to form the actual files.
-#
-# If UUWHO_FILE does not begin with /, then the name is relative to
-# the $LIB_DIR directory.
-
-#UUWHO_FILE=$UNSHAR_MAP_DIR/uuwho # to store database with the map files
-
-
-# UUWHO_USE_DBM - configure the uuwho command to use the DBM library
-#
-# optional
-#
-# If you would like the uuwho utility to use the DBM library, set
-# UUWHO_USE_DBM to true. If this is not set, then the uuwho utility
-# will use a sorted database. Earlier versions of the uuwho utility
-# worked only with the DBM library.
-#
-# Not using DBM does not result in any real measurable speed-up, since
-# binary searches of even large databases happen fast enough to
-# prevent users from noticing. However, generation of the DBM uuwho
-# database can take significantly longer. The uuwho utility creates
-# sorted databases by calling the sort utility, which is usually quite
-# fast.
-
-UUWHO_USE_DBM=true # use DBM
-#UUWHO_USE_DBM= # default, don't use DBM
-
-
-# TMP_DIR - secure temp directory used by smail utilities
-#
-# optional (defaults to /tmp)
-#
-# Some smail utilities use TMP_DIR to define a directory in which
-# their temporary files can be created. Utilities that use this
-# directory are those that wish to use a secure temporary area.
-#
-# The only smail utilities that need to use TMP_DIR are utilities that
-# should be run as root, or as some other user with appropriate privledges.
-# It is therefore recommended that TMP_DIR not be globally writable.
-
-TMP_DIR=/var/tmp
-
-
-# SECURE_PATH - path for smail utilities
-#
-# optional (defaults to system-specific path or /bin:/usr/bin)
-#
-# The smail utilities often set their PATH to begin with the SECURE_PATH.
-# The SECURE_PATH should be a path of directories where standard commands
-# are located. These directories and commands should not be writeable by
-# normal users. A common directory for smail utilities to append to
-# SECURE_PATH is UTIL_BIN_DIR.
-
-#SECURE_PATH=/bin:/usr/bin:/usr/ucb # common for BSD systems
-#SECURE_PATH=/bin:/usr/bin:/usr/amdahl/bin # common for UTS/580 systems
-#SECURE_PATH=/bin:/usr/bin # common for System V system
-
-
-# MAN1 - where smail user command man pages are to be installed
-# MAN5 - where smail file format man pages are to be installed
-# MAN8 - where smail administrator man pages should be installed
-# MAN1_EXT - file extension for user command man pages
-# MAN5_EXT - file extension for file format man pages
-# MAN8_EXT - file extension for adminstrator man pages
-#
-# optional
-#
-# The man page for "foo.an" in the smail man/man5 source directory
-# will be installed in MAN5/foo.MAN5_EXT, if MAN5 is defined.
-#
-# For some reason, BSD and System V differ on where file format man
-# pages are kept, hence the unusual values of MAN5 for System V.
-
-MAN1=!!PREFIX!!/man/man1
-MAN1_EXT=1
-
-MAN5=!!PREFIX!!/man/man5
-MAN5_EXT=5
-
-MAN8=!!PREFIX!!/man/man8
-MAN8_EXT=8
-
-# COMPRESS - file compression
-#
-# optional (default is system dependent or uses cat)
-#
-# The savelog utility can save space by compressing old log files.
-# Normally when a file is compressed, the suffix is added to the
-# filename.
-#
-# The COMPRESS symbol is the name of a program such that:
-#
-# $COMPRESS $COMP_FLAG filename ...
-#
-# the file: filename is replaced by: filename$DOT_Z
-# regardless of the size of filename. The command:
-#
-# $UNCOMPRESS filename$DOT_Z
-#
-# will replace filename$DOT_Z with the original filename.
-# The command:
-# $ZCAT filename$DOT_Z
-#
-# will read the compressed file: filename$DOT_Z and write the
-# plain text to standard output while leaving the file compressed.
-
-COMPRESS=gzip
-COMP_FLAG="-f"
-UNCOMPRESS=gunzip
-ZCAT=gzcat
-DOT_Z=".gz"
-
-#COMPRESS=pack # System V standard
-#COMP_FLAG="-f"
-#UNCOMPRESS=unpack
-#ZCAT=pcat
-#DOT_Z=".z"
-
-#COMPRESS=true # if no compress is used
-#COMP_FLAG=""
-#UNCOMPRESS=true
-#ZCAT=cat
-#DOT_Z=""
-
-
-# MISC_C_DEFINES - miscellaneous #defines for C programs
-#
-# optional
-#
-# The value of MISC_C_DEFINES is included directly into the file defs.h
-# in each source directory. It is useful as a central place for
-# miscellaneous #defines not otherwise setable above. In particular,
-# it is useful for overriding other more values given in the file
-# src/config.h. It was felt that it was appropriate to keep the
-# EDITME file fairly small, with only a reasonable subset of the
-# configurable aspects of smail being explicitly described. As a
-# result, there may be some other things in config.h that you may
-# wish to change. Use #define's here to accomplish this.
-#
-# A suitable collection of #undef's and #define's here can also
-# change the behavior defined in the file under conf/os or conf/arch
-# for your operating system and architecture. However, use of
-# MISC_C_DEFINES for this is discouraged.
-#
-# As with /bin/sh scripts, a logical line beginning with a : causes
-# that line to be parsed but ignored. If it were simply commented out
-# then the second line would be processed.
-
-# MISC_SH_DEFINES - miscellaneous script to include in defs.sh
-#
-# optional
-#
-# The value of MISC_SH_DEFINES is included directly into the file
-# defs.sh, in each source directory. It is a useful place to store
-# script lines to override values set by the mkdefs.sh shell script
-# or in a conf/os or conf/arch file.
-#
-# As with /bin/sh scripts, a logical line beginning with a : causes
-# that line to be parsed but ignored. If it were simply commented out
-# then the second line would be processed.
-
-
-
-# MISC_SED_DEFINES - miscellaneous lines to include in defs.sed
-#
-# optional
-#
-# The value of MISC_SED_DEFINES is included directly into the file
-# defs.sed, in each source directory. It is a useful place to store
-# sed lines to override lines set by the mkdefs.sh shell script from
-# information in a conf/os or conf/arch file.
-#
-# As with /bin/sh scripts, a logical line beginning with a : causes
-# that line to be parsed but ignored. If it were simply commented out
-# then the second line would be processed.
-
-# We can't readily think of good examples for this one.
diff --git a/mail/smail/files/freebsd2.0 b/mail/smail/files/freebsd2.0
index 78c3a5094078..6ebe7a288523 100644
--- a/mail/smail/files/freebsd2.0
+++ b/mail/smail/files/freebsd2.0
@@ -1,73 +1,68 @@
-# @(#)conf/os/bsd4.4 1.9 8/8/92 18:42:25
-#
-# bsd4.4 - define the characteristics of Berkeley UNIX Release 4.4
+# FreeBSD 2.x
+
+. $ROOT/conf/os/bsd4.4-lite
# OSNAMES - Names defining this operating system
-OSNAMES=UNIX_BSD4_2:UNIX_BSD:UNIX:POSIX_OS
-
-# LOCKING_PROTOCOL - macros for efficient file locking
-LOCKING_PROTOCOL="\
-#define lock_fd(fd) (flock((fd), LOCK_EX|LOCK_NB) < 0? FAIL: SUCCEED)
-#define lock_fd_wait(fd) (flock((fd), LOCK_EX) < 0? FAIL: SUCCEED)
-#define unlock_fd(fd) ((void) flock((fd), LOCK_UN))
-#define unlock_fd_wait(fd) ((void) flock((fd), LOCK_UN))
-#define lock_fd_rd_wait(fd) (flock((fd), LOCK_SH) < 0? FAIL: SUCCEED)
-"
-
-# MAILBOX_DIR - in which directory are user mailbox files
-MAILBOX_DIR=/var/mail
-
-# CONSOLE - name of the console device file
-CONSOLE=/dev/console
-
-# DECLARE_STRINGS - declare string routines, using macros as needed
-#DECLARE_STRINGS="\
-#include <strings.h>
-#define memcpy(s1,s2,n) (bcopy((s2),(s1),(n)))
-#define memcmp(s1,s2,n) (bcmp((s1),(s2),(n)))
-#/* the following are defined in string.c */
-##ifdef BSD>=199306
-#extern char *strpbrk();
-#extern int strspn();
-##endif
-#"
-
-# SECURE_PATH - directories containing system-supplied user programs
-SECURE_PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# OSLIBS - name any object libraries containing routines we will need
-# OSLIBS=-ldbm
-
-# DRIVER_CONFIGURATION - configuration file describing smail drivers
-DRIVER_CONFIGURATION=arpa-network
-
-# RANLIB - how do we organize an existing object archive library
-RANLIB=ranlib
-
-# CHOWN - command to use for accessing the chown program
-CHOWN=/usr/sbin/chown
-
-# COMPRESS, etc. - Select method of file compression (use compress)
-COMPRESS=gzip
-COMP_FLAG=-f
-DOT_Z=.gz
-UNCOMPRESS=gunzip
-ZCAT=gzcat
-
-# MISC_DEFINES - miscellaneous definitions
+OSNAMES="FREEBSD:$OSNAMES"
+
+# MAN1 - where smail user command man pages are to be installed
+# MAN5 - where smail file format man pages are to be installed
+# MAN8 - where smail administrator man pages should be installed
+# MAN1_EXT - file extension for user command man pages
+# MAN5_EXT - file extension for file format man pages
+# MAN8_EXT - file extension for adminstrator man pages
+#
#
-# 4.3BSD has utime(), but does not have a header file containing the
-# utimbuf structure, so declare it ourselves.
-# MISC_DEFINES=DECLARE_UTIMBUF
-MISC_DEFINES=INET_NTOA_USE_STRUCT
+MAN1_EXT=1
+MAN1=!!PREFIX!!/man/man1
+MAN5_EXT=5
+MAN5=!!PREFIX!!/man/man5
+MAN8_EXT=8
+MAN8=!!PREFIX!!/man/man8
+
+# SMAIL_BIN_DIR - location for uupath, etc.
+SMAIL_BIN_DIR=!!PREFIX!!/bin
+
+# SMAIL_NAME - to replace sendmail completely
+SMAIL_NAME=!!PREFIX!!/sbin/sendmail
+
+# OTHER_SMAIL_NAMES - to replace sendmail completely
+OTHER_SMAIL_NAMES=!!PREFIX!!/bin/mailq:!!PREFIX!!/bin/rmail:!!PREFIX!!/bin/rsmtp
+
+# NEWALIASES - to replace sendmail completely
+NEWALIASES=!!PREFIX!!/bin/newaliases
+
+# LIB_DIR - config files
+LIB_DIR=!!PREFIX!!/etc/smail
+
+# UTIL_BIN_DIR - programs
+UTIL_BIN_DIR=!!PREFIX!!/libexec/smail
+
+# Enable rfc1413 (ident protocol) and ESMTP sending support (EHLO)
+HAVE=$HAVE:EHLO
+
+# NOBODY - a user with few access capabilities
+NOBODY=nobody
+
+# PATHS_FILE, PATHS_TYPE - location and type of the pathalias router database
+PATHS_FILE=paths
+PATHS_TYPE=dbm
+
+# FORCE_PATHS_FILE, FORCE_PATHS_TYPE - location and type of the force_paths
+# router database
+FORCE_PATHS_FILE=forcepaths
+FORCE_PATHS_TYPE=lsearch
+
+# FORCE_SMTP_FILE, FORCE_SMTP_TYPE - location and type of the force_smtp
+# router database
+FORCE_SMTP_FILE=forcesmtp
+FORCE_SMTP_TYPE=lsearch
-# HAVE - what features should be used with this operating system
-HAVE=BIND:BSD_NETWORKING:BSTRING:COMSAT:DUP2:FSYNC:FTRUNCATE:GETHOSTNAME
-HAVE=$HAVE:GETOPT:HASH_BANG:HDB_UUCP:MKDIR:READDIR:RENAME:RLIMIT:SETEUID
-HAVE=$HAVE:SETGROUPS:SYS5_STRLIB:SYSEXITS:UNAME:VFORK:VFPRINTF:MEMMOVE
+# CPPFLAGS - interesting flags for the cpp, and cc commands
+CPPFLAGS="-I!!PREFIX!!/include"
-#HAVE=RENAME:MKDIR:BSD_NETWORKING:SYSEXITS:BSTRING:GETHOSTNAME:GETOPT:VFPRINTF
-#HAVE=$HAVE:HASH_BANG:DUP2:READDIR:SETGROUPS:FSYNC:FTRUNCATE:COMSAT:SYS5STRLIB
+# LDFLAGS - flags to pass to the loader
+LDFLAGS="-L!!PREFIX!!/lib"
-# UUCP_SYSTEM_FILE - path to UUCP file containing remote systems
-UUCP_SYSTEM_FILE=/usr/lib/uucp/L.sys
+# LIBS - libraries to include in binaries
+LIBS="-lident"
diff --git a/mail/smail/pkg-descr b/mail/smail/pkg-descr
index 43f45adaf7fc..c92febe42488 100644
--- a/mail/smail/pkg-descr
+++ b/mail/smail/pkg-descr
@@ -1,4 +1,4 @@
-This is Smail 3.1.29, a program used for receiving and delivering mail.
+This is Smail, a program used for receiving and delivering mail.
Its job is to take mail from sources on the local or
on remote hosts and deliver to the appropriate destinations.
This may be either on remote hosts or on the local machine.
diff --git a/mail/smail/pkg-plist b/mail/smail/pkg-plist
index 7ef4ef9b7c89..037a1d8e49fd 100644
--- a/mail/smail/pkg-plist
+++ b/mail/smail/pkg-plist
@@ -7,38 +7,42 @@ bin/uupath
bin/runq
bin/rsmtp
bin/smtpd
+bin/newaliases
bin/rmail
-lib/smail/config.sample
-lib/smail/directors.sample
-lib/smail/routers.sample
-lib/smail/transports.sample
-lib/smail/util/mkpath.awk
-lib/smail/util/getopt
-lib/smail/util/pathalias
-lib/smail/util/makedb
-lib/smail/util/mkline
-lib/smail/util/mksort
-lib/smail/util/dcasehost
-lib/smail/util/mkdbm
-lib/smail/util/mkpath
-lib/smail/util/pathmerge
-lib/smail/util/checkerr
-lib/smail/util/getmap
-lib/smail/util/gleem
-lib/smail/util/unsharmap
-lib/smail/util/savelog
-lib/smail/util/mkuuwho
-lib/smail/util/mkhpath
-lib/smail/util/mkaliases
-lib/smail/util/newaliases
-lib/smail/util/mkuuwho.awk
-lib/smail/maps
-lib/smail/methods
-lib/smail/COPYING
+sbin/sendmail
+libexec/smail/mkpath.awk
+libexec/smail/getopt
+libexec/smail/pathalias
+libexec/smail/makedb
+libexec/smail/mkline
+libexec/smail/mksort
+libexec/smail/dcasehost
+libexec/smail/mkdbm
+libexec/smail/mkpath
+libexec/smail/pathmerge
+libexec/smail/checkerr
+libexec/smail/getmap
+libexec/smail/gleem
+libexec/smail/logsumm
+libexec/smail/unsharmap
+libexec/smail/savelog
+libexec/smail/mkuuwho
+libexec/smail/mkhpath
+libexec/smail/smailbug
+libexec/smail/mkaliases
+libexec/smail/mkuuwho.awk
+etc/smail/COPYING
man/man1/pathto.1.gz
man/man1/uuwho.1.gz
man/man1/uupath.1.gz
+man/man5/smailconf.5.gz
man/man5/smail.5.gz
+man/man5/smaildrct.5.gz
+man/man5/smailmeth.5.gz
+man/man5/smailqual.5.gz
+man/man5/smailrtrs.5.gz
+man/man5/smailrtry.5.gz
+man/man5/smailtrns.5.gz
man/man8/pathalias.8.gz
man/man8/mkdbm.8.gz
man/man8/mkline.8.gz
diff --git a/mail/smail/scripts/configure b/mail/smail/scripts/configure
index 16067b7f41b7..4d5eed68016a 100644
--- a/mail/smail/scripts/configure
+++ b/mail/smail/scripts/configure
@@ -1,6 +1,10 @@
#!/bin/sh
#
-# $Id:$
+# $Id: configure,v 1.1.1.1 1994/10/23 01:22:35 torstenb Exp $
sed <${FILESDIR}/EDITME >${WRKSRC}/conf/EDITME s+!!PREFIX!!+$PREFIX+g
sed <${FILESDIR}/freebsd2.0 >${WRKSRC}/conf/os/freebsd2.0 s+!!PREFIX!!+$PREFIX+g
+
+if [ $USE_IDENT ]; then
+ echo >>${WRKSRC}/conf/os/freebsd2.0 HAVE=\$HAVE:RFC1413
+fi