Removed expired port:

2011-07-18 mail/qmail-vida: UID collisions, IGNOREd for four years with no-one caring

PR:		ports/157616
Submitted by:	crees
Approved by:	rene (mentor)

20 files changed, 0 insertions, 1161 deletions

diff --git a/mail/Makefile b/mail/Makefile
index 47df69c5b320..5142558de915 100644
--- a/mail/Makefile
+++ b/mail/Makefile
@@ -570,7 +570,6 @@
     SUBDIR += qmail-scanner1
     SUBDIR += qmail-spamcontrol
     SUBDIR += qmail-tls
-    SUBDIR += qmail-vida
     SUBDIR += qmailadmin
     SUBDIR += qmailadmin-devel
     SUBDIR += qmailanalog
diff --git a/mail/qmail-vida/Makefile b/mail/qmail-vida/Makefile
deleted file mode 100644
index e194bb3850de..000000000000
--- a/mail/qmail-vida/Makefile
+++ /dev/null
@@ -1,326 +0,0 @@
-# New ports collection makefile for:	qmail-vida
-# Date created:				22 Aug 2005
-# Whom:					FURUTATE,Mikihiko<futurebsd@infoseek.to>
-#
-# $FreeBSD$
-#
-
-PORTNAME=	qmail-vida
-PORTVERSION=	0.53
-CATEGORIES=	mail
-MASTER_SITES+=	${MASTER_SITE_SOURCEFORGE_JP:S/$/:vida/}	\
-		${MASTER_SITE_QMAIL:S/$/:qmail/}	\
-		http://cr.yp.to/checkpwd/:checkpassword	\
-		http://cr.yp.to/ucspi-tcp/:tcpserver
-MASTER_SITE_SUBDIR=${PORTNAME}/2100/:vida
-
-MAINTAINER=	futurebsd@infoseek.to
-COMMENT=	SMTP_AUTH/APOP support for qmail
-
-DEPRECATED=	UID collisions, IGNOREd for four years with no-one caring
-EXPIRATION_DATE=	2011-07-18
-
-IGNORE=		abuses UID registered to another port, and uses unregistered GID
-
-DISTFILES=	${DISTNAME}.tar.gz:vida	\
-		${DISTNAME_QMAIL}.tar.gz:qmail		\
-		${DISTNAME_CHECKPASSWORD}.tar.gz:checkpassword	\
-		${DISTNAME_TCPSERVER}.tar.gz:tcpserver
-DIST_SUBDIR=	qmail-vida
-PATCH_WRKSRC=	${WRKSRC_QMAIL}
-
-CONFLICTS=	qmail-[0-9]* qmail-mysql-[0-9]* qmail-ldap-[0-9]* \
-		qmail-smtp_auth+tls-[0-9]* qmail-spamcontrol-[0-9]* \
-		qmail-tls-[0-9]* checkpassword-[0-9]* ucspi-tcp-[0-9]* \
-		daemontools-[0-9]*
-
-DISTNAME_QMAIL=			qmail-1.03
-DISTNAME_CHECKPASSWORD=		checkpassword-0.90
-DISTNAME_TCPSERVER=		ucspi-tcp-0.88
-
-WRKSRC_QMAIL=		${WRKDIR}/${DISTNAME_QMAIL}
-WRKSRC_CHECKPASSWORD=	${WRKDIR}/${DISTNAME_CHECKPASSWORD}
-WRKSRC_TCPSERVER=	${WRKDIR}/${DISTNAME_TCPSERVER}
-
-WRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}
-PKGINSTALL?=	${WRKDIR}/pkg-install
-CSH?=		/bin/csh
-PREFIX?=	/var/qmail
-PORTDOCS=	*
-
-RESTRICTED=	"djb\'s packaging license does not allow non-standard qmail binary distributions"
-
-QMAIL_VERSION?=		1.03
-
-ALL_TARGET_QMAIL=	default dot-qmail.5 qmail-control.5 qmail-getpw.8 \
-			qmail-limits.7 qmail-newmrh.8 qmail-newu.8 qmail-pw2u.8 \
-			qmail-send.8 qmail-start.8 qmail-users.5
-
-ALL_TARGET_CHECKPASSWORD=	it
-ALL_TARGET_TCPSERVER=		prog install instcheck
-
-SCRIPTS_ENV=	BINOWN="${BINOWN}" BINGRP="${BINGRP}" BINMODE="${BINMODE}" \
-		MANMODE="${MANMODE}" CFLAGS="${CFLAGS}"
-
-PLIST_SUB+=	README_AUTH="@comment "
-PLIST_SUB+=	LDAP="@comment " NOT_LDAP=""
-PLIST_SUB+=	SMTP_AUTH_TLS="@comment "
-PLIST_SUB+=	SPAMCONTROL="@comment "
-PLIST_SUB+=	TLS="@comment "
-
-SUB_FILES+=	pkg-message${PKGMESSAGE_SUFFIX} mailer.conf.sample \
-		bootfiles.sed enable-qmail
-SUB_LIST+=	ECHO_CMD=${ECHO_CMD}
-PKGINSTALL?=	${WRKDIR}/pkg-install
-PKGMESSAGE?=	${WRKDIR}/pkg-message${PKGMESSAGE_SUFFIX}
-
-DOCFILES+=	${WRKSRC_QMAIL}/BLURB ${WRKSRC_QMAIL}/BLURB2 ${WRKSRC_QMAIL}/BLURB3 \
-		${WRKSRC_QMAIL}/BLURB4 ${WRKSRC_QMAIL}/INTERNALS ${WRKSRC_QMAIL}/SECURITY \
-		${WRKSRC_QMAIL}/THOUGHTS ${FILESDIR}/PORT_NOTES \
-		${FILESDIR}/PORT_NOTES_FreeBSD_40-RELEASE \
-		${WRKDIR}/mailer.conf.sample \
-		${WRKSRC_QMAIL}/FAQ ${WRKSRC_QMAIL}/UPGRADE ${WRKSRC_QMAIL}/SENDMAIL \
-		${WRKSRC_QMAIL}/INSTALL ${WRKSRC_QMAIL}/INSTALL.alias \
-		${WRKSRC_QMAIL}/INSTALL.ctl ${WRKSRC_QMAIL}/INSTALL.ids \
-		${WRKSRC_QMAIL}/INSTALL.maildir ${WRKSRC_QMAIL}/INSTALL.mbox \
-		${WRKSRC_QMAIL}/INSTALL.vsm ${WRKSRC_QMAIL}/TEST.deliver \
-		${WRKSRC_QMAIL}/TEST.receive ${WRKSRC_QMAIL}/REMOVE.sendmail \
-		${WRKSRC_QMAIL}/REMOVE.binmail ${WRKSRC_QMAIL}/PIC.local2alias \
-		${WRKSRC_QMAIL}/PIC.local2ext ${WRKSRC_QMAIL}/PIC.local2local \
-		${WRKSRC_QMAIL}/PIC.local2rem ${WRKSRC_QMAIL}/PIC.local2virt \
-		${WRKSRC_QMAIL}/PIC.nullclient ${WRKSRC_QMAIL}/PIC.relaybad \
-		${WRKSRC_QMAIL}/PIC.relaygood ${WRKSRC_QMAIL}/PIC.rem2local
-
-CONFIGUREPROGS=	${WRKSRC_QMAIL}/install ${WRKSRC_QMAIL}/dnsfq ${WRKSRC_QMAIL}/hostname \
-		${WRKSRC_QMAIL}/dnsip ${WRKSRC_QMAIL}/ipmeprint ${WRKSRC_QMAIL}/dnsptr
-CONFIGUREFILES=	${WRKSRC_QMAIL}/config ${WRKSRC_QMAIL}/config-fast
-BOOTFILES=	home home+df proc proc+df binm1 binm1+df \
-		binm2 binm2+df binm3 binm3+df maildir maildir+vida
-
-TCPSERVER_DB_DIR=	${PREFIX}/cdb/tcp.smtp.cdb
-.if (${PREFIX} != ${LOCALBASE})
-DOCSDIR=	${PREFIX}/doc
-.endif
-
-NO_MTREE=	yes
-
-OPTIONS+=	QMAILQUEUE_PATCH "run a QMAILQUEUE program" off
-OPTIONS+=	BIG_CONCURRENCY_PATCH "use a concurrency greater than 240" off
-OPTIONS+=	OUTGOINGIP_PATCH "set the IP address to send messages" off
-OPTIONS+=	LOCALTIME_PATCH "emit dates in the local timezone" off
-OPTIONS+=	MAILDIRQUOTA_PATCH "Maildir++ support" off
-OPTIONS+=	BLOCKEXEC_PATCH "block many windows viruses/worms" off
-OPTIONS+=	DISCBOUNCES_PATCH "discard double-bounces" off
-OPTIONS+=	RELAY_REJECT_PATCH "generated by so-called anti-spammers" off
-OPTIONS+=	RCDLINK "create rc.d/qmail.sh" on
-OPTIONS+=	TCPSERVER_MAN "install tcpserver man pages" on
-
-.include <bsd.port.pre.mk>
-
-.if ${ARCH} != "i386"
-BROKEN=		Does not compile on !i386
-.endif
-
-MAN1_QMAIL=	forward.1 condredirect.1 bouncesaying.1 except.1 maildirmake.1 \
-	maildir2mbox.1 maildirwatch.1 mailsubj.1 qreceipt.1 qbiff.1 preline.1 \
-	tcp-env.1
-MAN5_QMAIL=	addresses.5 envelopes.5 maildir.5 mbox.5 dot-qmail.5 qmail-control.5 \
-	qmail-header.5 qmail-log.5 qmail-users.5 tcp-environ.5
-MAN7_QMAIL=	forgeries.7 qmail-limits.7 qmail.7
-MAN8_QMAIL=	qmail-local.8 qmail-lspawn.8 qmail-getpw.8 qmail-remote.8 \
-	qmail-rspawn.8 qmail-clean.8 qmail-send.8 qmail-start.8 splogger.8 \
-	qmail-queue.8 qmail-inject.8 qmail-showctl.8 qmail-newmrh.8 \
-	qmail-newu.8 qmail-pw2u.8 qmail-qread.8 qmail-qstat.8 qmail-tcpok.8 \
-	qmail-tcpto.8 qmail-pop3d.8 qmail-popup.8 qmail-qmqpc.8 qmail-qmqpd.8 \
-	qmail-qmtpd.8 qmail-smtpd.8 qmail-command.8
-.for i in 1 5 7 8
-MAN${i}+=${MAN${i}_QMAIL}
-.endfor
-
-PATCH_SITES+=	${MASTER_SITE_QMAIL}
-PATCH_SITES+=	http://www.ckdhr.com/ckd/:dns
-PATCH_SITES+=	${MASTER_SITE_LOCAL:S/$/:dns/}
-PATCHFILES+=	qmail-103.patch:dns
-PATCH_SITE_SUBDIR+=	lioux/:dns
-PATCH_DIST_STRIP+=	-p1
-
-.if defined(WITH_QMAILQUEUE_PATCH)
-PATCHFILES+=	qmailqueue-patch
-.endif
-.if defined(WITH_BIG_CONCURRENCY_PATCH)
-PATCHFILES+=	big-concurrency.patch
-WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT?=	509
-.endif
-.if defined(WITH_OUTGOINGIP_PATCH)
-PATCHFILES+=	outgoingip.patch
-.endif
-.if defined(WITH_LOCALTIME_PATCH)
-PATCH_SITES+=	http://www.alib.jp/files/:localtime
-PATCHFILES+=	qmail-date-localtime.patch:localtime
-.endif
-.if defined(WITH_MAILDIRQUOTA_PATCH)
-PATCH_SITES+=	http://www.alexdupre.com/qmail/:quota
-PATCHFILES+=	qmail-maildir++.patch:quota
-.endif
-.if defined(WITH_BLOCKEXEC_PATCH) && !defined(BARRIER_BLOCKEXEC_PATCH)
-PATCH_SITES+=	http://www.alexdupre.com/qmail/:blockexec
-PATCHFILES+=	qmail-block-executables.patch:blockexec
-.endif
-.if defined(WITH_DISCBOUNCES_PATCH) && !defined(BARRIER_DISCBOUNCES_PATCH)
-PATCH_SITES+=	http://www.alexdupre.com/qmail/:doublebounce
-PATCHFILES+=	qmail-discard-double-bounces.patch:doublebounce
-.endif
-.if defined(WITH_RELAY_REJECT_PATCH)
-PATCHFILES+=	qmail-smtpd-relay-reject
-.endif
-.if defined(WITH_RCDLINK)
-PLIST_SUB+=	RCDLINK=""
-RCDLINK=
-.else
-PLIST_SUB+=	RCDLINK="@comment "
-RCDLINK=	\#
-.endif
-
-.if defined(WITH_TCPSERVER_MAN)
-MASTER_SITES+=	http://smarden.org/pape/djb/manpages/:1
-DISTFILES+=	${DISTNAME_TCPSERVER}-man.tar.gz:1
-MAN1_TCPSERVER=addcr.1 argv0.1 date@.1 delcr.1 finger@.1 fixcrio.1 \
-		http@.1 mconnect.1 rblsmtpd.1 recordio.1 tcpcat.1 \
-		tcpclient.1 tcprules.1 tcprulescheck.1 tcpserver.1 who@.1
-MAN1+=${MAN1_TCPSERVER}
-.endif
-
-pre-everything::
-.if !defined(BARRIER_BIG_CONCURRENCY_PATCH)
-	@${ECHO_MSG} ""
-	@${ECHO_MSG} "You may use the following build options:"
-	@${ECHO_MSG} ""
-	@${ECHO_MSG} "WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT=NUMBER"
-	@${ECHO_MSG} "				(default NUMBER=${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT})"
-	@${ECHO_MSG} "				set this to a value reasonable for"
-	@${ECHO_MSG} "				your system if you use the patch"
-	@${ECHO_MSG} ""
-.endif
-
-pre-patch:
-	cd ${WRKSRC} && make patch
-
-post-patch:
-	@${REINPLACE_CMD} 's!/var/qmail!${PREFIX}!; \
-			   s!/usr/local/!${LOCALBASE}/!' \
-		${WRKSRC_QMAIL}/Makefile
-	@${REINPLACE_CMD} 's!nofiles!qnofiles!g' \
-		${WRKSRC_QMAIL}/conf-groups
-	@${REINPLACE_CMD} '/"man"/d; /man\/man/d; /man\/cat/d; \
-			   /"doc"/d; /"boot","/d' \
-		${WRKSRC_QMAIL}/hier.c
-	cd ${WRKSRC} && make copy
-
-do-configure:
-	@${SED} -e 's,%%RCDLINK%%,${RCDLINK},g; s,%%LOCALBASE%%,${LOCALBASE},g' \
-		${FILESDIR}/pkg-install.in > ${WRKDIR}/pkg-install
-	@${SETENV} PKG_PREFIX="${PREFIX}" ${CSH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
-	@${ECHO_CMD} "${CC} ${CFLAGS}" > ${WRKSRC_QMAIL}/conf-cc
-	@${ECHO_CMD} ${PREFIX} > ${WRKSRC_QMAIL}/conf-qmail
-.if defined(WITH_BIG_CONCURRENCY_PATCH) && defined(WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT)
-	@if [ ${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT} -gt 0 ]; then \
-		${ECHO_CMD} "${WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT}" \
-			> ${WRKSRC_QMAIL}/conf-spawn ; \
-	fi
-.endif
-	@${ECHO_CMD} 'qnofiles' > ${WRKSRC_CHECKPASSWORD}/conf-groups
-	@${ECHO_CMD} 'cc -s -lcrypt' > ${WRKSRC_CHECKPASSWORD}/conf-ld
-	@${ECHO_CMD} ${PREFIX} >${WRKSRC_CHECKPASSWORD}/conf-home
-	@${ECHO_CMD} "${CC} ${CFLAGS}" > ${WRKSRC}/src/vida/conf-cc
-	@${ECHO_CMD} ${PREFIX} > ${WRKSRC}/src/vida/conf-home
-	@${ECHO_CMD} ${PREFIX} > ${WRKSRC}/src/vida/conf-qmailhome
-
-post-configure:
-	@${ECHO_CMD} ${PREFIX} > ${WRKSRC_TCPSERVER}/conf-home
-	@${ECHO_CMD} ${CC} ${CFLAGS} > ${WRKSRC_TCPSERVER}/conf-cc
-	@${ECHO_CMD} ${CC} -s > ${WRKSRC_TCPSERVER}/conf-ld
-
-do-build:
-	@${ECHO_CMD} "=>Building" ${DISTNAME_QMAIL}
-.for target in ${ALL_TARGET_QMAIL}
-	@cd ${WRKSRC_QMAIL} && make ${target}
-.endfor
-	@${ECHO_CMD} "=>Building" ${DISTNAME_CHECKPASSWORD}
-.for target in ${ALL_TARGET_CHECKPASSWORD}
-	@cd ${WRKSRC_CHECKPASSWORD} && make ${target}
-.endfor
-	@${ECHO_CMD} "=>Building" ${DISTNAME_TCPSERVER}
-.for target in ${ALL_TARGET_TCPSERVER}
-	@cd ${WRKSRC_TCPSERVER} && make ${target}
-.endfor
-
-do-install:
-.for i in ${BOOTFILES}
-	@if  [ -f ${WRKSRC_QMAIL}/${i}.sh ] ; then \
-		${SED} -f ${WRKDIR}/bootfiles.sed ${WRKSRC_QMAIL}/$i.sh > ${WRKDIR}/${i} ; \
-	elif [ -f ${FILESDIR}/${i}.in ] ; then \
-		${SED} -e 's,%%PREFIX%%,${PREFIX},g ; s,%%TCPSERVERDB%%,${TCPSERVER_DB_DIR},g ; s,%%ECHO_CMD%%,${ECHO_CMD},g' ${FILESDIR}/$i.in > ${WRKDIR}/${i} ; \
-	elif [ -f ${FILESDIR}/${i} ] ; then \
-		${SED} -f ${WRKDIR}/bootfiles.sed ${FILESDIR}/$i > ${WRKDIR}/${i} ; \
-	fi
-.endfor
-	@${MKDIR} ${PREFIX}/configure
-	@cd ${WRKSRC_QMAIL} ; ./install
-	${INSTALL_PROGRAM} ${CONFIGUREPROGS} ${PREFIX}/configure
-	${INSTALL_SCRIPT} ${CONFIGUREFILES} ${PREFIX}/configure
-.for i in ${BOOTFILES}
-	${INSTALL_SCRIPT} ${WRKDIR}/${i:T} ${PREFIX}/boot
-.endfor
-.for i in 1 5 7 8
-	@${MKDIR} ${PREFIX}/man/man$i
-.for j in ${MAN${i}_QMAIL}
-	${INSTALL_MAN} ${WRKSRC_QMAIL}/$j ${PREFIX}/man/man${i}
-.endfor
-.endfor
-.if !defined(NOPORTDOCS)
-	@${MKDIR} ${DOCSDIR}
-	${INSTALL_DATA} ${DOCFILES} ${DOCSDIR}
-.  if defined(PACKAGE_BUILDING)
-	@${ECHO_CMD} "FreeBSD Binary package qmail installation" \
-		> ${DOCSDIR}/SYSDEPS
-.  else
-	@cd ${WRKSRC_QMAIL} && ${CAT} `${CAT} SYSDEPS` \
-		> ${DOCSDIR}/SYSDEPS
-.  endif
-.endif
-	@${MKDIR} ${PREFIX}/scripts
-	${INSTALL_SCRIPT} ${FILESDIR}/mkaliasdir ${PREFIX}/scripts
-	${INSTALL_SCRIPT} ${WRKDIR}/enable-qmail ${PREFIX}/scripts
-.for script in ${SCRIPTS}
-	${INSTALL_SCRIPT} ${WRKDIR}/scripts/${script} ${PREFIX}/scripts
-.endfor
-	@${SETENV} PKG_PREFIX="${PREFIX}" ${CSH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
-	@${ECHO_CMD}
-	@${CAT} ${PKGMESSAGE}
-	@${ECHO_CMD}
-	@cd ${WRKSRC_CHECKPASSWORD} && make setup
-.for file_name in addcr argv0 delcr fixcrio mconnect-io rblsmtpd recordio tcpclient tcprules tcprulescheck tcpserver
-	@${INSTALL_PROGRAM} ${WRKSRC_TCPSERVER}/${file_name} ${PREFIX}/bin
-.endfor
-.for file_name in date@ finger@ http@ mconnect who@ tcpcat
-	@${INSTALL_SCRIPT} ${WRKSRC_TCPSERVER}/${file_name} ${PREFIX}/bin
-.endfor
-
-.if defined(WITH_TCPSERVER_MAN)
-.for j in ${MAN1_TCPSERVER}
-	${INSTALL_MAN} ${WRKSRC_TCPSERVER}-man/${j} ${PREFIX}/man/man1/
-.endfor
-.endif
-	cd ${WRKSRC}/src/vida && make setup
-	cd ${WRKSRC} && make install-doc
-
-post-install:
-.if !defined(NOPORTDOCS)
-	@${MKDIR} ${DOCSDIR}/checkpassword
-. for f in CHANGES FILES README SYSDEPS TARGETS TODO VERSION
-	${INSTALL_DATA} ${WRKSRC_CHECKPASSWORD}/$f ${DOCSDIR}/checkpassword
-. endfor
-.endif
-	cd ${WRKSRC}/src/vida && make check
-
-.include <bsd.port.post.mk>
diff --git a/mail/qmail-vida/distinfo b/mail/qmail-vida/distinfo
deleted file mode 100644
index a9f66bb235be..000000000000
--- a/mail/qmail-vida/distinfo
+++ /dev/null
@@ -1,28 +0,0 @@
-SHA256 (qmail-vida/qmail-vida-0.53.tar.gz) = 18b21425c5d2b3fd656c2457e9a9a8a35e5023838658449b9eead36b0499c082
-SIZE (qmail-vida/qmail-vida-0.53.tar.gz) = 73484
-SHA256 (qmail-vida/qmail-1.03.tar.gz) = 21ed6c562cbb55092a66197c35c8222b84115d1acab0854fdb1ad1f301626f88
-SIZE (qmail-vida/qmail-1.03.tar.gz) = 220668
-SHA256 (qmail-vida/checkpassword-0.90.tar.gz) = 74300364b6be26be08e34f768532e911789827179e680bc89db3525fe415762f
-SIZE (qmail-vida/checkpassword-0.90.tar.gz) = 15631
-SHA256 (qmail-vida/ucspi-tcp-0.88.tar.gz) = 4a0615cab74886f5b4f7e8fd32933a07b955536a3476d74ea087a3ea66a23e9c
-SIZE (qmail-vida/ucspi-tcp-0.88.tar.gz) = 53019
-SHA256 (qmail-vida/ucspi-tcp-0.88-man.tar.gz) = 09b1dd69ca3722b62c030abb27df9560cb72ff5d6247e4628e0c61e957b408ef
-SIZE (qmail-vida/ucspi-tcp-0.88-man.tar.gz) = 7562
-SHA256 (qmail-vida/qmail-103.patch) = 4cad53c7a6628a600c74c36bfee327db5052ca24c222d4013e4dfcd7f427653d
-SIZE (qmail-vida/qmail-103.patch) = 2104
-SHA256 (qmail-vida/qmailqueue-patch) = 52e82aaa34e9f1308b063cc986a701f67e161662e9f789bb12af03a381530f94
-SIZE (qmail-vida/qmailqueue-patch) = 2510
-SHA256 (qmail-vida/big-concurrency.patch) = 0322991955878e86af495f7317c3a4bd2e60640f9a6dd70ad501fff27242ac2f
-SIZE (qmail-vida/big-concurrency.patch) = 9331
-SHA256 (qmail-vida/outgoingip.patch) = c117f5c41033f062cdc782a16403fc19725e98d92e73ab193dfd24f48c0ca5ac
-SIZE (qmail-vida/outgoingip.patch) = 6839
-SHA256 (qmail-vida/qmail-date-localtime.patch) = 852aee7577edf8814c2429f82740da2a7e0b0b23516e10c4f3f7e845a47be2d5
-SIZE (qmail-vida/qmail-date-localtime.patch) = 2603
-SHA256 (qmail-vida/qmail-maildir++.patch) = 79e3f1f8f95b58b6d17e5469f125d873fe212d0a5a6d19b538ad57176fbafb52
-SIZE (qmail-vida/qmail-maildir++.patch) = 38088
-SHA256 (qmail-vida/qmail-block-executables.patch) = 97512624eb02db51e10ab6d0dd834a8797a238d0e006bd1c6c94a183d291b456
-SIZE (qmail-vida/qmail-block-executables.patch) = 5070
-SHA256 (qmail-vida/qmail-discard-double-bounces.patch) = 14489eefd9908f60af13fadd574d0e9bb936e5d1b706690ce52efef68529a8d8
-SIZE (qmail-vida/qmail-discard-double-bounces.patch) = 1305
-SHA256 (qmail-vida/qmail-smtpd-relay-reject) = 4f988af8fbc2829b1dd2b7d8cdca362b16cee7f27e020f6ca98d4cbdbd875fe9
-SIZE (qmail-vida/qmail-smtpd-relay-reject) = 1230
diff --git a/mail/qmail-vida/files/PORT_NOTES b/mail/qmail-vida/files/PORT_NOTES
deleted file mode 100644
index 07844f9cf5db..000000000000
--- a/mail/qmail-vida/files/PORT_NOTES
+++ /dev/null
@@ -1,125 +0,0 @@
-This text was originally taken from the qmail INSTALL file that you
-will find in /var/qmail/doc/.  In addition to INSTALL, there are many
-other potentially important qmail documents there.
-
-As with all ports, the ports maintainer (me!) makes NO WARRANTIES of
-any kind: expressed, implied, or other; about the reliability or
-security of this package.  Any damage or problems derived from its
-usage or related to it are neither my responsibility nor the software
-author's.  This package is provided AS IS.
-
-Although I am probably sounding cold and harsh, believe me: qmail is
-one of the most reliable and easy-to-use softwares around.  However,
-this also is NOT a WARRANTY.  It is just an opinion.  :)
-
-The qmail port will normally install into /var/qmail/.  If you changed
-this to /usr/local/, then please note that the docs have been
-installed into /usr/local/share/doc/qmail/ (as opposed to
-/usr/local/doc/).
-
-If you wish to rerun the automatic configuration utility, do:
-
-# cd /var/qmail/configure ; ./config
-
-If you are upgrading from a previous version of qmail, you should read
-/var/qmail/doc/UPGRADE and follow all the steps after #6.
-
-
-[from /var/qmail/doc/INSTALL]
-
-SAVE COPIES OF YOUR OUTGOING MAIL! Like any other piece of software (and
-information generally), the qmail system comes with NO WARRANTY. It's
-much more secure and reliable than sendmail, but that's not saying much.
-
-[pre-build instructions elided]
-
-To create /var/qmail and configure qmail (won't interfere with sendmail):
-
-[#1 - #3 elided]
-
- 4. Read INSTALL.ctl and FAQ. Minimal survival command:
-       # ./config
-
-[The "minimal" command has already been performed.]
-
- 5. Read INSTALL.alias. Minimal survival command:
-       # (cd ~alias; touch .qmail-postmaster .qmail-mailer-daemon .qmail-root)
-       # chmod 644 ~alias/.qmail*
-
-[The "minimal" command has already been performed.]
-
- 6. Read INSTALL.mbox and INSTALL.vsm.
-
- 7. Read INSTALL.maildir.
-
- 8. Copy /var/qmail/boot/home (or proc) to /var/qmail/rc.
-
-[When you do this, qmail will be started automatically the next time
- you boot.  This is because the command
- ``ln -s /var/qmail/rc /usr/local/etc/rc.d'' has been executed.  There
- is a number of sample bootfiles provided.  Not all of them will work.]
-
-To test qmail deliveries (won't interfere with sendmail):
-
- 9. Enable deliveries of messages injected into qmail:
-       # csh -cf '/var/qmail/rc &'
-
-10. Read TEST.deliver.
-
-
-To upgrade from sendmail to qmail:
-
-11. Read SENDMAIL. This is what your users will want to know about the
-    switch from sendmail to qmail.
-
-12. Read REMOVE.sendmail. You must remove sendmail before installing
-    qmail.
-
-[Do not disable sendmail as instructed in REMOVE.sendmail step #1.
- Instead, change the sendmail_enable line in /etc/rc.conf to read
-
-        sendmail_enable="NO"
-
- If you are running a FreeBSD 4.0-RELEASE or later, read
- PORT_NOTES_FreeBSD_40-RELEASE before executing step 12.
- ]
-
-13. Read REMOVE.binmail.
-
-14. Add
-            csh -cf '/var/qmail/rc &'
-    to your boot scripts, so that the qmail daemons are restarted
-    whenever your system reboots. Make sure you include the &.
-
-[Do not do this.  Unless you remove the symlink
- /usr/local/etc/rc.d/qmail.sh, the script /var/qmail/rc will be run
- everytime you boot.  See also "local_startup" in /etc/rc.conf.]
-
-15. Make qmail's ``sendmail'' wrapper available to MUAs:
-       # ln -s /var/qmail/bin/sendmail /usr/lib/sendmail
-       # ln -s /var/qmail/bin/sendmail /usr/sbin/sendmail
-    /usr/sbin might not exist on your system.
-
-16. Set up qmail-smtpd in /etc/inetd.conf (all on one line):
-            smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env
-            tcp-env /var/qmail/bin/qmail-smtpd
-
-[A freshly-updated /etc/inetd.conf will have a sample qmail entry that
- you can simply uncomment.]
-
-17. Reboot. (Or kill -HUP your inetd and make sure the qmail daemons
-    are running.)
-
-18. Read TEST.receive.
-
-
-
-That's it! To report success:
-       % ( echo 'First M. Last'; cat /var/qmail/doc/SYSDEPS ) \
-		| mail djb-qst@cr.yp.to
-Replace First M. Last with your name.
-
-[Note that "cat `cat SYSDEPS`" has changed to "cat /var/qmail/doc/SYSDEPS"]
-
-If you have questions about qmail, join the qmail mailing list; see
-http://pobox.com/~djb/qmail.html.
diff --git a/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE b/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE
deleted file mode 100644
index 25963439d603..000000000000
--- a/mail/qmail-vida/files/PORT_NOTES_FreeBSD_40-RELEASE
+++ /dev/null
@@ -1,61 +0,0 @@
-In addition to PORT_NOTES_FreeBSD_40-RELEASE, there are many
-other potentially important qmail documents there such as PORT_NOTES
-and INSTALL.
-
-As with all ports, the ports maintainer (me!) makes NO WARRANTIES of
-any kind: expressed, implied, or other; about the reliability or
-security of this package.  Any damage or problems derived from its
-usage or related to it are neither my responsibility nor the software
-author's.  This package is provided AS IS.
-
-Although I am probably sounding cold and harsh, believe me: qmail is
-one of the most reliable and easy-to-use softwares around.  However,
-this also is NOT a WARRANTY.  It is just an opinion.  :)
-
-The qmail port will normally install into /var/qmail/.  If you changed
-this to /usr/local/, then please note that the docs have been
-installed into /usr/local/share/doc/qmail/ (as opposed to
-/usr/local/doc/).
-
-##
-### Document starts here
-##
-
-If you read PORT_NOTES, you may have noticed I mentioned step 12 should
-be changed for FreeBSD versions 4.0-Release and later.
-
-FreeBSD 4.0-Release and later come with a program named mailwrapper (8)
-which eases the replacement of sendmail. No binaries need to be touched,
-"chmod"ed, erased, deleted or, otherwise, modified.
-
-Whenever you call /usr/sbin/sendmail, /usr/bin/mail, or /usr/bin/newaliases;
-in fact, you are calling a symbolic link to mailwrapper. Mailwrapper
-then calls the appropriate binary according to its configuration file.
-
-An excerpt from the mailwrapper manual: 
-
-"The mailwrapper program is designed to replace /usr/sbin/sendmail and to
- invoke an appropriate MTA instead of sendmail(8) based on configuration
- information placed in /etc/mail/mailer.conf. This permits the administra-
- tor to configure which MTA is to be invoked on the system at run time."
-
-Configuration for mailwrapper is kept in /etc/mail/mailer.conf.
-
-Here follows my personal /etc/mail/mailer.conf
-
-sendmail        /var/qmail/bin/sendmail
-send-mail       /var/qmail/bin/sendmail
-mailq           /var/qmail/bin/qmail-qread
-newaliases      /var/qmail/bin/newaliases
-
-There is a sample mailer.conf in this directory, please install
-over the /etc/mail/mailer.conf to unfold qmail as your default MTA.
-Please donīt forget to backup /etc/mail/mailer.conf before doing
-so. Better safe then sorry.
-
-So, whenever you call sendmail, in fact, you are using the appropriate
-"qmail-clones".
-
-You should notice, though, that the programs do not behave exactly as
-their sendmail counterparts. Therefore, reading the appropriate
-/var/qmail/doc files and man pages is highly advisable.
diff --git a/mail/qmail-vida/files/bootfiles.sed.in b/mail/qmail-vida/files/bootfiles.sed.in
deleted file mode 100644
index d2b10a7122b7..000000000000
--- a/mail/qmail-vida/files/bootfiles.sed.in
+++ /dev/null
@@ -1,15 +0,0 @@
-s!QMAIL/!%%PREFIX%%/!
-s!^\(exec\)!case "\$1" in\
-start)\
-\	\1!
-s!\(qmail\)$!\1\&\
-\	exit 0\
-\	;;\
-stop)\
-\	exec killall qmail-send\
-\	;;\
-*)\
-\	%%ECHO_CMD%% "Usage: `basename \$0` {start|stop}" >\&2\
-\	exit 64\
-\	;;\
-esac!
diff --git a/mail/qmail-vida/files/enable-qmail.in b/mail/qmail-vida/files/enable-qmail.in
deleted file mode 100644
index a864dd93c97e..000000000000
--- a/mail/qmail-vida/files/enable-qmail.in
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-disable_sendmail() {
-	echo "===> I hope you know what you are doing:"
-	echo "===> You just told your system to not"
-	echo "===> automaticaly start sendmail on your"
-	echo "===> next startup."
-	echo "===> (i.e., added sendmail_enable=\"NONE\" to rc.conf)"
-
-	if [ -f ${RC_CONF_FILE} ]; then
-		echo sendmail_enable=\"NONE\" >> ${RC_CONF_FILE}
-	fi
-}
-
-enable_qmail() {
-	if [ -f ${MAILER_CONF_FILE} ]; then
-		cp ${MAILER_CONF_FILE} ${MAILER_CONF_FILE}.bak && \
-		cp %%DOCSDIR%%/mailer.conf.sample ${MAILER_CONF_FILE}
-	else
-		echo "===> ERROR: YOU DO NOT HAVE A VALID ${MAILER_CONF_FILE}"
-		echo "===> FIX this and try again"
-		echo "===> or, run \"$0 --force\" if you are sure"
-		echo "===> you want this port replacing some binaries"
-		echo "===> IF THIS FEELS UNEASY, read %%DOCSDIR%%/REMOVE.sendmail and do it manually"
-		echo ""
-		echo "=======> VERY IMPORTANT <======="
-		echo "===> One side issue is that if you do replace them,"
-		echo "===> you really should consider ADDING \"NO_SENDMAIL=true\""
-		echo "===> to your /etc/make.conf if you do \"make world\"."
-		echo "===> Otherwise, \"make world\" will \"fix\" your sendmail"
-		echo "===> installation breaking your qmail one."
-		echo "===> Read the FreeBSD Handbook section on \"make world\""
-		echo "===> if you do not know what I am talking about."
-		echo "===> Check http://www.FreeBSD.org/ for the most"
-		echo "===> updated copy of the Handbook."
-	fi
-	echo "===> Do not forget to choose an appropriate qmail startup"
-	echo "===> script. Go through %%PREFIX%%/boot, choose one"
-	echo "===> and copy the chosen script as %%PREFIX%%/rc"
-	echo "===> For example, \"cp %%PREFIX%%/boot/proc+df %%PREFIX%%/rc\""
-}
-
-# taken from mail/postfix idea
-force_enable_qmail() {
-	echo "===> Replacing sendmail"
-	if [ -e ${SENDMAIL} ]; then
-		mv -f ${SENDMAIL} ${SENDMAIL}.OFF && \
-		chmod 0 ${SENDMAIL}.OFF
-	fi
-	if [ -e %%PREFIX%%/bin/sendmail ]; then
-		ln -sf %%PREFIX%%/bin/sendmail ${SENDMAIL}
-	fi
-
-	echo "===> Replacing mailq"
-	if [ -e ${MAILQ} ]; then
-		mv -f ${MAILQ} ${MAILQ}.OFF && \
-		chmod 0 ${MAILQ}.OFF
-	fi
-	if [ -e %%PREFIX%%/bin/qmail-qread ]; then
-		ln -sf %%PREFIX%%/bin/qmail-qread ${MAILQ}
-	fi
-
-	echo "===> Replacing newaliases"
-	if [ -e ${NEWALIASES} ]; then
-		mv -f ${NEWALIASES} ${NEWALIASES}.OFF && \
-		chmod 0 ${NEWALIASES}.OFF
-	fi
-	if [ -e %%PREFIX%%/bin/newaliases ]; then
-		ln -sf %%PREFIX%%/bin/newaliases ${NEWALIASES}
-	fi
-}
-
-# main
-RC_CONF_FILE=/etc/rc.conf
-MAILER_CONF_FILE=/etc/mail/mailer.conf
-SENDMAIL=/usr/sbin/sendmail
-MAILQ=/usr/bin/mailq
-NEWALIASES=/usr/bin/newaliases
-
-disable_sendmail
-
-if [ "$1" = "--force" ]; then
-  force_enable_qmail
-else
-  enable_qmail
-fi
diff --git a/mail/qmail-vida/files/maildir b/mail/qmail-vida/files/maildir
deleted file mode 100644
index a11543bcdf7a..000000000000
--- a/mail/qmail-vida/files/maildir
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# Using splogger to send the log through syslog.
-# Using qmail-local to deliver messages to Maildir format by default
-
-exec env - PATH="QMAIL/bin:$PATH" \
-qmail-start ./Maildir/ \
-splogger qmail
diff --git a/mail/qmail-vida/files/maildir+vida.in b/mail/qmail-vida/files/maildir+vida.in
deleted file mode 100644
index d0ddc70b4890..000000000000
--- a/mail/qmail-vida/files/maildir+vida.in
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-
-# Using splogger to send the log through syslog.
-# Using qmail-local to deliver messages to Maildir format by default
-# Using tcpserver and checkpassword
-
-case "$1" in
-
-start)
-	exec env - PATH="%%PREFIX%%/bin:$PATH" \
-	qmail-start ./Maildir/ \
-	splogger qmail &
-	exec env - PATH="%%PREFIX%%/bin:$PATH" \
-	tcpserver -vHR -x %%TCPSERVERDB%% -c 40 0 \
-	smtp qmail-smtpup "$HOST" checkpassword qmail-smtpd 2>&1 | \
-	%%PREFIX%%/bin/splogger smtpd 4 &
-	exec env - PATH="%%PREFIX%%/bin:$PATH" \
-	tcpserver -vHR -x %%TCPSERVERDB%% 0 \
-	pop3 qmail-popup "$HOST" checkpassword qmail-pop3d Maildir 2>&1 | \
-	%%PREFIX%%/bin/splogger pop3d 4 &
-	;;
-stop)
-	# Stop all qmail process
-	killall qmail-send
-	killall splogger
-	killall tcpserver
-	;;
-*)
-    %%ECHO_CMD%% "Usage: `basename $0` {start|stop}" >&2
-    exit 64
-    ;;
-esac
-
diff --git a/mail/qmail-vida/files/mailer.conf.sample.in b/mail/qmail-vida/files/mailer.conf.sample.in
deleted file mode 100644
index 08a3ceb57ce7..000000000000
--- a/mail/qmail-vida/files/mailer.conf.sample.in
+++ /dev/null
@@ -1,10 +0,0 @@
-# Configuration for mailwrapper is kept in /etc/mail/mailer.conf.
-# Replace that file with this one to enable qmail under a sendmail
-# disguise. Very useful.
-
-sendmail	%%PREFIX%%/bin/sendmail
-send-mail	%%PREFIX%%/bin/sendmail
-mailq		%%PREFIX%%/bin/qmail-qread
-newaliases	%%PREFIX%%/bin/newaliases
-hoststat	%%PREFIX%%/bin/qmail-tcpto
-purgestat	%%PREFIX%%/bin/qmail-tcpok
diff --git a/mail/qmail-vida/files/mkaliasdir b/mail/qmail-vida/files/mkaliasdir
deleted file mode 100644
index fab410af6370..000000000000
--- a/mail/qmail-vida/files/mkaliasdir
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/usr/bin/perl
-#
-#  Script to populate a Qmail ~alias directory with entries from
-#  an [SZ]mail{er} or sendmail-like aliases file
-#
-# $FreeBSD: /tmp/pcvs/ports/mail/qmail-vida/files/Attic/mkaliasdir,v 1.1 2005-08-30 14:44:26 garga Exp $
-#
-#  Dan Cross <tenser@spitfire.ecsel.psu.edu>
-#
-
-require 'getopts.pl';
-
-$ALIASES = "/etc/aliases";
-
-die "$0 must be run as root!\n" if ($< != 0);
-
-do Getopts('vf:');
-
-$verbose = 0 unless ($verbose = $opt_v);
-$aliases = $ALIASES unless ($aliases = $opt_f);
-
-if (($aliasdir = (getpwnam("qalias"))[7]) eq "")
-{
-	die "User qalias does not exist, bailing!\n";
-}
-
-if (($qmaildir = (getpwnam("qmaild"))[7]) eq "")
-{
-	die "User qmaild does not exist, bailing!\n";
-}
-
-$ME = "$qmaildir/control/me";
-
-die "Error opening $ME: $!\n" unless open(ME, "$ME");
-chop($me = <ME>);
-close (ME);
-
-die "Error opening $aliases: $!\n" unless open(ALIASES, "$aliases");
-
-while (<ALIASES>)
-{
-	chop;
-
-	$mode = ">";
-
-	s/#.*$//;
-
-	($target, $data) = split(/:/, $_, 2);
-
-	$data =~ s/^\s+//;
-	$data =~ s/\s+$//;
-
-	next if (/^$/);
-
-	if ($data =~ /^$/)
-	{
-		while (chop($data = <ALIASES>))
-		{
-			$data =~ s/^\s+//;
-			$data =~ s/\s+$//;
-
-			last if ($data !~ /^$/);
-		}
-	}
-
-	$f = "$aliasdir/.qmail-$target";
-
-	@data = split(/\,/, $data);
-	$datum = $data[0];
-
-	if ($datum =~ /^:include:/i)
-	{
-		$datum =~ s/^:include://i;
-		$verbose && print "Symlinking $f to $datum...\n";
-		symlink($datum, $f);
-		shift(@data);
-		$f = $datum;
-		$mode = ">>";
-	}
-
-	open(ALIAS, "$mode$f") || die "Error creating $f: $!\n";
-
-	$verbose && print "Creating $f...\n";
-
-	foreach $datum (@data)
-	{
-		$datum =~ s/"$// if ($datum =~ s/^"// ||
-					$datum =~ s/^\|[ \t]*"/|/);
-
-		if ($datum =~ /^[|\/]/)
-		{
-			print ALIAS $datum, "\n";
-		}
-		else
-		{
-			$datum = "&" . $datum;
-			$datum .= "\@$me" unless ($datum =~ /\@/);
-			print ALIAS "$datum\n";
-		}
-
-		$verbose && print "\tPopulating $f with $datum...\n";
-	}
-
-	close(ALIAS);
-}
-
-close(ALIASES);
-
-exit 0;
diff --git a/mail/qmail-vida/files/patch-install.c b/mail/qmail-vida/files/patch-install.c
deleted file mode 100644
index 97780f9f61fd..000000000000
--- a/mail/qmail-vida/files/patch-install.c
+++ /dev/null
@@ -1,37 +0,0 @@
---- install.c.orig	Mon Jun 15 07:53:16 1998
-+++ install.c	Fri May  6 09:30:15 2005
-@@ -10,6 +10,7 @@
- #define FATAL "install: fatal: "
- 
- int fdsourcedir = -1;
-+noc;  /* hack for bin package install -- see port pkg/INSTALL */
- 
- void h(home,uid,gid,mode)
- char *home;
-@@ -75,6 +76,7 @@
- int gid;
- int mode;
- {
-+ if (!noc) {
-   int fdin;
-   int fdout;
- 
-@@ -115,6 +117,7 @@
-     strerr_die6sys(111,FATAL,"unable to chown .../",subdir,"/",file,": ");
-   if (chmod(file,mode) == -1)
-     strerr_die6sys(111,FATAL,"unable to chmod .../",subdir,"/",file,": ");
-+ }
- }
- 
- void z(home,file,len,uid,gid,mode)
-@@ -152,8 +155,9 @@
-     strerr_die6sys(111,FATAL,"unable to chmod ",home,"/",file,": ");
- }
- 
--void main()
-+void main(argc, argv)
- {
-+  noc=--argc;
-   fdsourcedir = open_read(".");
-   if (fdsourcedir == -1)
-     strerr_die2sys(111,FATAL,"unable to open current directory: ");
diff --git a/mail/qmail-vida/files/patch-qmail-local.c b/mail/qmail-vida/files/patch-qmail-local.c
deleted file mode 100644
index ee0709db5b8f..000000000000
--- a/mail/qmail-vida/files/patch-qmail-local.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- qmail-local.c.orig	Sun Nov 23 18:30:43 2003
-+++ qmail-local.c	Sun Nov 23 18:31:31 2003
-@@ -645,7 +645,7 @@
-     {
-      cmds.s[j] = 0;
-      k = j;
--     while ((k > i) && (cmds.s[k - 1] == ' ') || (cmds.s[k - 1] == '\t'))
-+     while ((k > i) && ((cmds.s[k - 1] == ' ') || (cmds.s[k - 1] == '\t')))
-        cmds.s[--k] = 0;
-      switch(cmds.s[i])
-       {
diff --git a/mail/qmail-vida/files/pkg-install.in b/mail/qmail-vida/files/pkg-install.in
deleted file mode 100644
index e7c09c48855c..000000000000
--- a/mail/qmail-vida/files/pkg-install.in
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/bin/csh -f
-#
-# $FreeBSD: /tmp/pcvs/ports/mail/qmail-vida/files/Attic/pkg-install.in,v 1.1 2005-08-30 14:44:26 garga Exp $
-#
-
-# Author : Marcos Tischer Vallim
-# E-Mail : tischer@gmail.com
-# Date   : Tue Mar 22 00:40:45 BRT 2005
-
-set path = ( /bin /sbin /usr/bin /usr/sbin )
-
-if ($uid != 0) then
-	echo "It is necessary to add missing qmail users/groups at";
-	echo "this stage.  Please either add them manually or retry";
-	echo "as root.";
-	exit 1;
-endif
-
-if (! -x `which pw`) then
-	echo "This system looks like a pre-2.2 version of FreeBSD.  We see that it";
-	echo "is missing the "pw" utility.  We need this utility.  Please get and";
-	echo "install it, and try again.  You can get the source from:";
-	echo "";
-	echo "  ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/usr.sbin/pw.tar.gz";
-	echo "";
-	echo "No pw";
-	exit 1;
-endif
-
-switch ($argv[2])
-
-case "PRE-INSTALL":
-	set groups  = (vida qmail qnofiles);
-	set gids    = (83 82 81);
-	set users   = (alias qmaild qmaill qmailp qmailq qmailr qmails qmailu authdb);
-	set users_g = (qnofiles qnofiles qnofiles qnofiles qmail qmail qmail vida vida);
-	set uids    = (81 82 83 84 85 86 87 90 91);
-
-
-	set k = 1;
-	foreach group ($groups)
-		pw groupshow $group >& /dev/null;
-	
-		if ($status) then
-			pw groupadd $group -g $gids[$k];
-	
-			if ($status) then
-				echo "Failed to add group '$group' as gid '$gids[$k]'";
-				exit 1;
-			endif
-		endif
-	
-		set chkgid = (`pw groupshow $group | sed -e "s,:, ,g"`); 
-		if ($chkgid[3] != $gids[$k]) then
-			echo "Group '$group' should have gid '$gids[$k]'";
-			exit 1;
-		endif
-	
-		@ k++;
-	end
-	
-	set k = 1;
-	foreach user ($users)
-		pw usershow $user >& /dev/null;
-	
-		if ($status) then
-			if ($user == "alias") then
-				set home = ${PKG_PREFIX}/alias;
-			else
-				set home = ${PKG_PREFIX};
-			endif
-	
-			pw useradd $user -g $users_g[$k] -d $home -s /nonexistent -u $uids[$k];
-	
-			if ($status) then
-				echo "Failed to add user '$user' as uid '$uids[$k]'";
-				exit 1;
-			endif
-		endif
-	
-		set chkuid = (`pw usershow $user | sed -e "s,:, ,g"`); 
-		if ($chkuid[3] != $uids[$k]) then
-			echo "User '$user' should have uid '$uids[$k]'";
-			exit 1;
-		endif
-	
-		@ k++;
-	end
-
-	breaksw;
-
-case "POST-INSTALL":
-	${PKG_PREFIX}/configure/install x;
-
-	if ( ! `filetest -e ${PKG_PREFIX}/control/me` ) then
-		cd ${PKG_PREFIX}/configure && ./config;
-	endif
-
-	%%RCDLINK%%ln -s ${PKG_PREFIX}/rc %%LOCALBASE%%/etc/rc.d/qmail.sh;
-
-	touch ${PKG_PREFIX}/alias/.qmail-{postmaster,root,mailer-daemon};
-
-	if ($status) then
-		echo "Failed to create files :";
-		echo "  ${PKG_PREFIX}/alias/.qmail-postmaster";
-		echo "  ${PKG_PREFIX}/alias/.qmail-root";
-		echo "  ${PKG_PREFIX}/alias/.qmail-mailer-daemon";
-		exit 1;
-	endif
-
-	breaksw;
-endsw
-
-exit 0;
diff --git a/mail/qmail-vida/files/pkg-message-ldap.in b/mail/qmail-vida/files/pkg-message-ldap.in
deleted file mode 100644
index 56272ff24640..000000000000
--- a/mail/qmail-vida/files/pkg-message-ldap.in
+++ /dev/null
@@ -1,35 +0,0 @@
-	ATTENTION:
-
-Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
-It contains important information about testing and configuring
-qmail, and finally replacing sendmail with qmail.
-
-You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
-or login.conf(5)).
-
-Do not forget to read %%PREFIX%%/doc/QLDAPINSTALL. After all,
-this is NOT our old stock qmail. And, %%PREFIX%%/doc/ANTISPAM
-for some antispam control measures.
-
-The qmail.schema file was copied to %%DOCSDIR%%. Remember
-to copy it to ldap's schema directory
-
-You can enable qmail as your default mailer executing:
-> %%PREFIX%%/scripts/enable-qmail
-
-=====><=====
-
-If you've built this port with TLS support (WITH_TLS=yes)
-
-==> You will need to provide a working certificate in %%PREFIX%%/control/cert.pem :
-
-# makes a self-signed certificate
-3) do "make certificate"
-
-# makes a certificate request
-4) do "make certificate-req"
-
-=====><=====
-
-Now, you need to use it. Check a little FreeBSD specific how-to at
-http://freebsd.cg.nu/postfixqmail-ldap.html
diff --git a/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in b/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in
deleted file mode 100644
index b833bab4dd99..000000000000
--- a/mail/qmail-vida/files/pkg-message-smtp_auth+tls.in
+++ /dev/null
@@ -1,23 +0,0 @@
-	ATTENTION:
-
-Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
-It contains important information about testing and configuring
-qmail, and finally replacing sendmail with qmail.
-
-You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
-or login.conf(5)).
-
-Do not forget to read both %%PREFIX%%/doc/SMTP_AUTH+TLS.readme AND
-%%PREFIX%%/doc/README.auth.  After all, this is NOT our old stock
-qmail.
-
-You can enable qmail as your default mailer executing:
-> %%PREFIX%%/scripts/enable-qmail
-
-==> As you need to provide a working certificate in %%PREFIX%%/control/cert.pem :
-
-# makes a self-signed certificate
-3) do "make certificate"
-
-# makes a certificate request
-4) do "make certificate-req"
diff --git a/mail/qmail-vida/files/pkg-message-tls.in b/mail/qmail-vida/files/pkg-message-tls.in
deleted file mode 100644
index a13b66738e46..000000000000
--- a/mail/qmail-vida/files/pkg-message-tls.in
+++ /dev/null
@@ -1,22 +0,0 @@
-	ATTENTION:
-
-Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
-It contains important information about testing and configuring
-qmail, and finally replacing sendmail with qmail.
-
-You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
-or login.conf(5)).
-
-Do not forget to read %%PREFIX%%/doc/TLS.readme. After all,
-this is NOT our old stock qmail.
-
-You can enable qmail as your default mailer executing:
-> %%PREFIX%%/scripts/enable-qmail
-
-==> As you need to provide a working certificate in %%PREFIX%%/control/cert.pem :
-
-# makes a self-signed certificate
-3) do "make certificate"
-
-# makes a certificate request
-4) do "make certificate-req"
diff --git a/mail/qmail-vida/files/pkg-message.in b/mail/qmail-vida/files/pkg-message.in
deleted file mode 100644
index f3736f9b333e..000000000000
--- a/mail/qmail-vida/files/pkg-message.in
+++ /dev/null
@@ -1,11 +0,0 @@
-	ATTENTION:
-
-Please make sure that you read %%PREFIX%%/doc/PORT_NOTES.
-It contains important information about testing and configuring
-qmail, and finally replacing sendmail with qmail.
-
-You should also add %%PREFIX%%/man to your MANPATH (see manpath(1)
-or login.conf(5)).
-
-You can enable qmail as your default mailer executing:
-> %%PREFIX%%/scripts/enable-qmail
diff --git a/mail/qmail-vida/pkg-descr b/mail/qmail-vida/pkg-descr
deleted file mode 100644
index 9dccf7edbcb3..000000000000
--- a/mail/qmail-vida/pkg-descr
+++ /dev/null
@@ -1 +0,0 @@
-qmail-vida : qmail Virtual Domain and Authentication
diff --git a/mail/qmail-vida/pkg-plist b/mail/qmail-vida/pkg-plist
deleted file mode 100644
index 00ca5d71a223..000000000000
--- a/mail/qmail-vida/pkg-plist
+++ /dev/null
@@ -1,105 +0,0 @@
-@comment $FreeBSD$
-%%RCDLINK%%@unexec rm -f %%LOCALBASE%%/etc/rc.d/qmail.sh
-bin/qmail-queue
-bin/qmail-lspawn
-bin/qmail-start
-bin/qmail-getpw
-bin/qmail-local
-bin/qmail-remote
-bin/qmail-rspawn
-bin/qmail-clean
-bin/qmail-send
-bin/splogger
-bin/qmail-newu
-bin/qmail-newmrh
-bin/qmail-pw2u
-bin/qmail-inject
-bin/predate
-bin/datemail
-bin/mailsubj
-bin/qmail-showctl
-bin/qmail-qread
-bin/qmail-qstat
-bin/qmail-tcpto
-bin/qmail-tcpok
-bin/qmail-pop3d
-bin/qmail-popup
-bin/qmail-qmqpc
-bin/qmail-qmqpd
-bin/qmail-qmtpd
-bin/qmail-smtpd
-bin/qmail-smtpup
-bin/sendmail
-bin/tcp-env
-bin/qreceipt
-bin/qsmhook
-bin/qbiff
-bin/forward
-bin/preline
-bin/condredirect
-bin/bouncesaying
-bin/except
-bin/maildirmake
-bin/maildir2mbox
-bin/maildirwatch
-bin/qail
-bin/elq
-bin/pinq
-bin/checkpassword
-bin/addcr
-bin/argv0
-bin/delcr
-bin/fixcrio
-bin/mconnect-io
-bin/rblsmtpd
-bin/recordio
-bin/tcpclient
-bin/tcprules
-bin/tcprulescheck
-bin/tcpserver
-bin/date@
-bin/finger@
-bin/http@
-bin/mconnect
-bin/who@
-bin/tcpcat
-bin/vida-pwdbinit
-bin/vida-pwdbmake
-bin/vida-passwd
-bin/vida-assign
-bin/vida-maildirmake
-boot/home
-boot/home+df
-boot/proc
-boot/proc+df
-boot/binm1
-boot/binm1+df
-boot/binm2
-boot/binm2+df
-boot/binm3
-boot/binm3+df
-boot/maildir
-boot/maildir+vida
-configure/install
-configure/dnsfq
-configure/hostname
-configure/dnsip
-configure/ipmeprint
-configure/dnsptr
-configure/config
-configure/config-fast
-scripts/mkaliasdir
-scripts/enable-qmail
-@dirrm boot
-@dirrm bin
-@dirrm configure
-@dirrm man/man1
-@dirrm man/man5
-@dirrm man/man7
-@dirrm man/man8
-@dirrm man
-@dirrm scripts
-@dirrm users
-@unexec echo "1) If you are permanently removing qmail, you should also ``rm -Rf ${PKG_PREFIX}/alias ${PKG_PREFIX}/control ${PKG_PREFIX}/queue ${PKG_PREFIX}/users'' and remove the qmail and qmail-vida users/groups." | /usr/bin/fmt
-@unexec echo "2) Do not forget to reconfigure your /etc/mail/mailer.conf to use your older MTA, or reconfigure your old MTA binaries if you decided to replace them." | /usr/bin/fmt
-@unexec echo "3) Do not forget to enable sendmail as your default MTA if you have to. You can do it just executing 'echo sendmail_enable=\"YES\" >> /etc/rc.conf" | /usr/bin/fmt