Fix a few "bad example" problems in the rc.d scripts that have been

propogated by copy and paste.

1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).

No PORTREVISION bumps because all of these changes are noops.

49 files changed, 79 insertions, 146 deletions

diff --git a/mail/antivirus-milter/files/antivirus-milter.sh.in b/mail/antivirus-milter/files/antivirus-milter.sh.in
index 8d89715ebb31..cee33194de97 100644
--- a/mail/antivirus-milter/files/antivirus-milter.sh.in
+++ b/mail/antivirus-milter/files/antivirus-milter.sh.in
@@ -10,8 +10,6 @@
 # KEYWORD: shutdown
 #
 
-prefix=%%PREFIX%%
-
 # Define these antivirus_* variables in one of these files:
 #	/etc/rc.conf
 #	/etc/rc.conf.local
@@ -22,14 +20,14 @@ prefix=%%PREFIX%%
 antivirus_enable=${antivirus_enable:-"NO"}      # Enable antivirus-milter
 antivirus_pidfile=${antivirus_pidfile:-"%%ANTIVIRUS%%/run/antivirus.pid"} # Path to pidfile
 antivirus_socket=${antivirus_socket:-"%%ANTIVIRUS%%/antivirus.sock"} # Path to socket
-antivirus_flags=${antivirus_flags:-""} # Flags to antivirus
+#antivirus_flags=${antivirus_flags:-""} # Flags to antivirus
 
 . /etc/rc.subr
 
 name="antivirus"
 rcvar=`set_rcvar`
-command="${prefix}/libexec/antivirus"
-required_files="${prefix}/etc/antivirus.conf"
+command="%%PREFIX%%/libexec/antivirus"
+required_files="%%PREFIX%%/etc/antivirus.conf"
 start_precmd="antivirus_prestart"
 stop_postcmd="antivirus_poststop"
 
@@ -47,5 +45,3 @@ pidfile="${antivirus_pidfile}"
 command_args="-p local:${antivirus_socket} ${antivirus_flags}"
 
 run_rc_command "$1"
-
-# eof
diff --git a/mail/batv-milter/files/milter-batv.sh.in b/mail/batv-milter/files/milter-batv.sh.in
index feb81e986357..e9af1bd7ca76 100644
--- a/mail/batv-milter/files/milter-batv.sh.in
+++ b/mail/batv-milter/files/milter-batv.sh.in
@@ -57,7 +57,6 @@ load_rc_config $name
 : ${milterbatv_key=""}
 # Options other than above can be set with $milterbatv_flags.
 # see batv-milter documentation for detail.
-: ${milterbatv_flags=""}
 
 if [ -n "$2" ]; then
     profile="$2"
diff --git a/mail/courier/files/courier.sh.in b/mail/courier/files/courier.sh.in
index a2ec2e2f7fa4..703fa7abd17a 100644
--- a/mail/courier/files/courier.sh.in
+++ b/mail/courier/files/courier.sh.in
@@ -11,10 +11,6 @@
 # REQUIRE: LOGIN courier_authdaemond
 # BEFORE:  securelevel
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0+:
-# If you want this script to start with the base rc scripts
-# move courier.sh to /etc/rc.d/courier
 
 prefix="%%PREFIX%%"
 exec_prefix="${prefix}"
diff --git a/mail/cyrus-imapd2/files/imapd.sh.in b/mail/cyrus-imapd2/files/imapd.sh.in
index b8dd83bd4a01..489c6301d6c4 100644
--- a/mail/cyrus-imapd2/files/imapd.sh.in
+++ b/mail/cyrus-imapd2/files/imapd.sh.in
@@ -7,12 +7,6 @@
 # REQUIRE: DAEMON
 # BEFORE: mail
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0+:
-# If you want this script to start with the base rc scripts
-# move imapd.sh to /etc/rc.d/cyrus_imapd
-
-prefix=%%PREFIX%%
 
 # Define these cyrus_imapd_* variables in one of these files:
 #	/etc/rc.conf
@@ -22,16 +16,16 @@ prefix=%%PREFIX%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 [ -z "$cyrus_imapd_enable" ] && cyrus_imapd_enable="NO"	# Enable imapd
-#cyrus_imapd_program="${prefix}/cyrus/bin/master"	# Location of imapd
+#cyrus_imapd_program="%%PREFIX%%/cyrus/bin/master"	# Location of imapd
 [ -z "$cyrus_imapd_flags" ] && cyrus_imapd_flags="-d" # Flags to imapd program
 
 . %%RC_SUBR%%
 
 name="cyrus_imapd"
 rcvar=`set_rcvar`
-command="${prefix}/cyrus/bin/master"
+command="%%PREFIX%%/cyrus/bin/master"
 pidfile="/var/run/cyrus-master.pid"
-required_files="${prefix}/etc/cyrus.conf ${prefix}/etc/imapd.conf"
+required_files="%%PREFIX%%/etc/cyrus.conf %%PREFIX%%/etc/imapd.conf"
 stop_postcmd="cyrus_imapd_poststop"
 
 cyrus_imapd_poststop() {
diff --git a/mail/cyrus-imapd22/files/imapd.sh.in b/mail/cyrus-imapd22/files/imapd.sh.in
index b8dd83bd4a01..489c6301d6c4 100644
--- a/mail/cyrus-imapd22/files/imapd.sh.in
+++ b/mail/cyrus-imapd22/files/imapd.sh.in
@@ -7,12 +7,6 @@
 # REQUIRE: DAEMON
 # BEFORE: mail
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0+:
-# If you want this script to start with the base rc scripts
-# move imapd.sh to /etc/rc.d/cyrus_imapd
-
-prefix=%%PREFIX%%
 
 # Define these cyrus_imapd_* variables in one of these files:
 #	/etc/rc.conf
@@ -22,16 +16,16 @@ prefix=%%PREFIX%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 [ -z "$cyrus_imapd_enable" ] && cyrus_imapd_enable="NO"	# Enable imapd
-#cyrus_imapd_program="${prefix}/cyrus/bin/master"	# Location of imapd
+#cyrus_imapd_program="%%PREFIX%%/cyrus/bin/master"	# Location of imapd
 [ -z "$cyrus_imapd_flags" ] && cyrus_imapd_flags="-d" # Flags to imapd program
 
 . %%RC_SUBR%%
 
 name="cyrus_imapd"
 rcvar=`set_rcvar`
-command="${prefix}/cyrus/bin/master"
+command="%%PREFIX%%/cyrus/bin/master"
 pidfile="/var/run/cyrus-master.pid"
-required_files="${prefix}/etc/cyrus.conf ${prefix}/etc/imapd.conf"
+required_files="%%PREFIX%%/etc/cyrus.conf %%PREFIX%%/etc/imapd.conf"
 stop_postcmd="cyrus_imapd_poststop"
 
 cyrus_imapd_poststop() {
diff --git a/mail/cyrus-imapd23/files/imapd.sh.in b/mail/cyrus-imapd23/files/imapd.sh.in
index b8dd83bd4a01..489c6301d6c4 100644
--- a/mail/cyrus-imapd23/files/imapd.sh.in
+++ b/mail/cyrus-imapd23/files/imapd.sh.in
@@ -7,12 +7,6 @@
 # REQUIRE: DAEMON
 # BEFORE: mail
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0+:
-# If you want this script to start with the base rc scripts
-# move imapd.sh to /etc/rc.d/cyrus_imapd
-
-prefix=%%PREFIX%%
 
 # Define these cyrus_imapd_* variables in one of these files:
 #	/etc/rc.conf
@@ -22,16 +16,16 @@ prefix=%%PREFIX%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 [ -z "$cyrus_imapd_enable" ] && cyrus_imapd_enable="NO"	# Enable imapd
-#cyrus_imapd_program="${prefix}/cyrus/bin/master"	# Location of imapd
+#cyrus_imapd_program="%%PREFIX%%/cyrus/bin/master"	# Location of imapd
 [ -z "$cyrus_imapd_flags" ] && cyrus_imapd_flags="-d" # Flags to imapd program
 
 . %%RC_SUBR%%
 
 name="cyrus_imapd"
 rcvar=`set_rcvar`
-command="${prefix}/cyrus/bin/master"
+command="%%PREFIX%%/cyrus/bin/master"
 pidfile="/var/run/cyrus-master.pid"
-required_files="${prefix}/etc/cyrus.conf ${prefix}/etc/imapd.conf"
+required_files="%%PREFIX%%/etc/cyrus.conf %%PREFIX%%/etc/imapd.conf"
 stop_postcmd="cyrus_imapd_poststop"
 
 cyrus_imapd_poststop() {
diff --git a/mail/cyrus-imapd24/files/imapd.sh.in b/mail/cyrus-imapd24/files/imapd.sh.in
index b8dd83bd4a01..489c6301d6c4 100644
--- a/mail/cyrus-imapd24/files/imapd.sh.in
+++ b/mail/cyrus-imapd24/files/imapd.sh.in
@@ -7,12 +7,6 @@
 # REQUIRE: DAEMON
 # BEFORE: mail
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0+:
-# If you want this script to start with the base rc scripts
-# move imapd.sh to /etc/rc.d/cyrus_imapd
-
-prefix=%%PREFIX%%
 
 # Define these cyrus_imapd_* variables in one of these files:
 #	/etc/rc.conf
@@ -22,16 +16,16 @@ prefix=%%PREFIX%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 [ -z "$cyrus_imapd_enable" ] && cyrus_imapd_enable="NO"	# Enable imapd
-#cyrus_imapd_program="${prefix}/cyrus/bin/master"	# Location of imapd
+#cyrus_imapd_program="%%PREFIX%%/cyrus/bin/master"	# Location of imapd
 [ -z "$cyrus_imapd_flags" ] && cyrus_imapd_flags="-d" # Flags to imapd program
 
 . %%RC_SUBR%%
 
 name="cyrus_imapd"
 rcvar=`set_rcvar`
-command="${prefix}/cyrus/bin/master"
+command="%%PREFIX%%/cyrus/bin/master"
 pidfile="/var/run/cyrus-master.pid"
-required_files="${prefix}/etc/cyrus.conf ${prefix}/etc/imapd.conf"
+required_files="%%PREFIX%%/etc/cyrus.conf %%PREFIX%%/etc/imapd.conf"
 stop_postcmd="cyrus_imapd_poststop"
 
 cyrus_imapd_poststop() {
diff --git a/mail/dbmail/files/dbmail-imapd.sh.in b/mail/dbmail/files/dbmail-imapd.sh.in
index 82505e96d9b0..dce54a82f917 100644
--- a/mail/dbmail/files/dbmail-imapd.sh.in
+++ b/mail/dbmail/files/dbmail-imapd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-imapd: 
 #
-#dbmail_imapd_enable="YES"
+# dbmail_imapd_enable="YES"
+# dbmail_imapd_flags="<set as needed>"
 #
 # See dbmail-imapd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_imapd_enable="NO"}
-: ${dbmail_imapd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail/files/dbmail-lmtpd.sh.in b/mail/dbmail/files/dbmail-lmtpd.sh.in
index f1133f43a70e..e62355064847 100644
--- a/mail/dbmail/files/dbmail-lmtpd.sh.in
+++ b/mail/dbmail/files/dbmail-lmtpd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-lmtpd: 
 #
-#dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_flags="<set as needed>"
 #
 # See dbmail-lmtpd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_lmtpd_enable="NO"}
-: ${dbmail_lmtpd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail/files/dbmail-pop3d.sh.in b/mail/dbmail/files/dbmail-pop3d.sh.in
index d787f6a668e7..8df206a0edec 100644
--- a/mail/dbmail/files/dbmail-pop3d.sh.in
+++ b/mail/dbmail/files/dbmail-pop3d.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-pop3d:
 #
-#dbmail_pop3d_enable="YES"
+# dbmail_pop3d_enable="YES"
+# dbmail_pop3d_flags="<set as needed>"
 #
 # See dbmail-pop3d(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_pop3d_enable="NO"}
-: ${dbmail_pop3d_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail/files/dbmail-timsieved.sh.in b/mail/dbmail/files/dbmail-timsieved.sh.in
index 26b5888cba6d..63a2d5b97cda 100644
--- a/mail/dbmail/files/dbmail-timsieved.sh.in
+++ b/mail/dbmail/files/dbmail-timsieved.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-timsieved:
 #
-#dbmail_timsieved_enable="YES"
+# dbmail_timsieved_enable="YES"
+# dbmail_timsieved_flags="<set as needed>"
 #
 # See dbmail-timsieved(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_timsieved_enable="NO"}
-: ${dbmail_timsieved_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail20/files/dbmail-imapd.sh.in b/mail/dbmail20/files/dbmail-imapd.sh.in
index 82505e96d9b0..dce54a82f917 100644
--- a/mail/dbmail20/files/dbmail-imapd.sh.in
+++ b/mail/dbmail20/files/dbmail-imapd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-imapd: 
 #
-#dbmail_imapd_enable="YES"
+# dbmail_imapd_enable="YES"
+# dbmail_imapd_flags="<set as needed>"
 #
 # See dbmail-imapd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_imapd_enable="NO"}
-: ${dbmail_imapd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail20/files/dbmail-lmtpd.sh.in b/mail/dbmail20/files/dbmail-lmtpd.sh.in
index f1133f43a70e..e62355064847 100644
--- a/mail/dbmail20/files/dbmail-lmtpd.sh.in
+++ b/mail/dbmail20/files/dbmail-lmtpd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-lmtpd: 
 #
-#dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_flags="<set as needed>"
 #
 # See dbmail-lmtpd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_lmtpd_enable="NO"}
-: ${dbmail_lmtpd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail20/files/dbmail-pop3d.sh.in b/mail/dbmail20/files/dbmail-pop3d.sh.in
index d787f6a668e7..8df206a0edec 100644
--- a/mail/dbmail20/files/dbmail-pop3d.sh.in
+++ b/mail/dbmail20/files/dbmail-pop3d.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-pop3d:
 #
-#dbmail_pop3d_enable="YES"
+# dbmail_pop3d_enable="YES"
+# dbmail_pop3d_flags="<set as needed>"
 #
 # See dbmail-pop3d(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_pop3d_enable="NO"}
-: ${dbmail_pop3d_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail21/files/dbmail-imapd.sh.in b/mail/dbmail21/files/dbmail-imapd.sh.in
index 82505e96d9b0..dce54a82f917 100644
--- a/mail/dbmail21/files/dbmail-imapd.sh.in
+++ b/mail/dbmail21/files/dbmail-imapd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-imapd: 
 #
-#dbmail_imapd_enable="YES"
+# dbmail_imapd_enable="YES"
+# dbmail_imapd_flags="<set as needed>"
 #
 # See dbmail-imapd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_imapd_enable="NO"}
-: ${dbmail_imapd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail21/files/dbmail-lmtpd.sh.in b/mail/dbmail21/files/dbmail-lmtpd.sh.in
index f1133f43a70e..e62355064847 100644
--- a/mail/dbmail21/files/dbmail-lmtpd.sh.in
+++ b/mail/dbmail21/files/dbmail-lmtpd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-lmtpd: 
 #
-#dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_flags="<set as needed>"
 #
 # See dbmail-lmtpd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_lmtpd_enable="NO"}
-: ${dbmail_lmtpd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail21/files/dbmail-pop3d.sh.in b/mail/dbmail21/files/dbmail-pop3d.sh.in
index 21bc97377b8b..132177736ce5 100644
--- a/mail/dbmail21/files/dbmail-pop3d.sh.in
+++ b/mail/dbmail21/files/dbmail-pop3d.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-pop3d: 
 #
-#dbmail_pop3d_enable="YES"
+# dbmail_pop3d_enable="YES"
+# dbmail_pop3d_flags="<set as needed>"
 #
 # See dbmail-pop3d(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_pop3d_enable="NO"}
-: ${dbmail_pop3d_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail21/files/dbmail-timsieved.sh.in b/mail/dbmail21/files/dbmail-timsieved.sh.in
index 26b5888cba6d..63a2d5b97cda 100644
--- a/mail/dbmail21/files/dbmail-timsieved.sh.in
+++ b/mail/dbmail21/files/dbmail-timsieved.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-timsieved:
 #
-#dbmail_timsieved_enable="YES"
+# dbmail_timsieved_enable="YES"
+# dbmail_timsieved_flags="<set as needed>"
 #
 # See dbmail-timsieved(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_timsieved_enable="NO"}
-: ${dbmail_timsieved_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail22/files/dbmail-imapd.sh.in b/mail/dbmail22/files/dbmail-imapd.sh.in
index 82505e96d9b0..dce54a82f917 100644
--- a/mail/dbmail22/files/dbmail-imapd.sh.in
+++ b/mail/dbmail22/files/dbmail-imapd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-imapd: 
 #
-#dbmail_imapd_enable="YES"
+# dbmail_imapd_enable="YES"
+# dbmail_imapd_flags="<set as needed>"
 #
 # See dbmail-imapd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_imapd_enable="NO"}
-: ${dbmail_imapd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail22/files/dbmail-lmtpd.sh.in b/mail/dbmail22/files/dbmail-lmtpd.sh.in
index f1133f43a70e..e62355064847 100644
--- a/mail/dbmail22/files/dbmail-lmtpd.sh.in
+++ b/mail/dbmail22/files/dbmail-lmtpd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-lmtpd: 
 #
-#dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_flags="<set as needed>"
 #
 # See dbmail-lmtpd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_lmtpd_enable="NO"}
-: ${dbmail_lmtpd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail22/files/dbmail-pop3d.sh.in b/mail/dbmail22/files/dbmail-pop3d.sh.in
index d787f6a668e7..8df206a0edec 100644
--- a/mail/dbmail22/files/dbmail-pop3d.sh.in
+++ b/mail/dbmail22/files/dbmail-pop3d.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-pop3d:
 #
-#dbmail_pop3d_enable="YES"
+# dbmail_pop3d_enable="YES"
+# dbmail_pop3d_flags="<set as needed>"
 #
 # See dbmail-pop3d(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_pop3d_enable="NO"}
-: ${dbmail_pop3d_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail22/files/dbmail-timsieved.sh.in b/mail/dbmail22/files/dbmail-timsieved.sh.in
index 26b5888cba6d..63a2d5b97cda 100644
--- a/mail/dbmail22/files/dbmail-timsieved.sh.in
+++ b/mail/dbmail22/files/dbmail-timsieved.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-timsieved:
 #
-#dbmail_timsieved_enable="YES"
+# dbmail_timsieved_enable="YES"
+# dbmail_timsieved_flags="<set as needed>"
 #
 # See dbmail-timsieved(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_timsieved_enable="NO"}
-: ${dbmail_timsieved_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail23/files/dbmail-imapd.sh.in b/mail/dbmail23/files/dbmail-imapd.sh.in
index 82505e96d9b0..dce54a82f917 100644
--- a/mail/dbmail23/files/dbmail-imapd.sh.in
+++ b/mail/dbmail23/files/dbmail-imapd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-imapd: 
 #
-#dbmail_imapd_enable="YES"
+# dbmail_imapd_enable="YES"
+# dbmail_imapd_flags="<set as needed>"
 #
 # See dbmail-imapd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_imapd_enable="NO"}
-: ${dbmail_imapd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail23/files/dbmail-lmtpd.sh.in b/mail/dbmail23/files/dbmail-lmtpd.sh.in
index f1133f43a70e..e62355064847 100644
--- a/mail/dbmail23/files/dbmail-lmtpd.sh.in
+++ b/mail/dbmail23/files/dbmail-lmtpd.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-lmtpd: 
 #
-#dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_enable="YES"
+# dbmail_lmtpd_flags="<set as needed>"
 #
 # See dbmail-lmtpd(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_lmtpd_enable="NO"}
-: ${dbmail_lmtpd_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail23/files/dbmail-pop3d.sh.in b/mail/dbmail23/files/dbmail-pop3d.sh.in
index d787f6a668e7..8df206a0edec 100644
--- a/mail/dbmail23/files/dbmail-pop3d.sh.in
+++ b/mail/dbmail23/files/dbmail-pop3d.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-pop3d:
 #
-#dbmail_pop3d_enable="YES"
+# dbmail_pop3d_enable="YES"
+# dbmail_pop3d_flags="<set as needed>"
 #
 # See dbmail-pop3d(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_pop3d_enable="NO"}
-: ${dbmail_pop3d_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dbmail23/files/dbmail-timsieved.sh.in b/mail/dbmail23/files/dbmail-timsieved.sh.in
index 26b5888cba6d..63a2d5b97cda 100644
--- a/mail/dbmail23/files/dbmail-timsieved.sh.in
+++ b/mail/dbmail23/files/dbmail-timsieved.sh.in
@@ -10,7 +10,8 @@
 #
 # Add the following lines to /etc/rc.conf to enable dbmail-timsieved:
 #
-#dbmail_timsieved_enable="YES"
+# dbmail_timsieved_enable="YES"
+# dbmail_timsieved_flags="<set as needed>"
 #
 # See dbmail-timsieved(8) for flags
 #
@@ -27,6 +28,5 @@ required_files=%%PREFIX%%/etc/dbmail.conf
 # read settings, set default values
 load_rc_config "$name"
 : ${dbmail_timsieved_enable="NO"}
-: ${dbmail_timsieved_flags=""}
 
 run_rc_command "$1"
diff --git a/mail/dkim-milter/files/milter-dkim.sh.in b/mail/dkim-milter/files/milter-dkim.sh.in
index b1e7d077b554..8e1dee427f4a 100644
--- a/mail/dkim-milter/files/milter-dkim.sh.in
+++ b/mail/dkim-milter/files/milter-dkim.sh.in
@@ -59,7 +59,6 @@ load_rc_config $name
 : ${milterdkim_alg=""}
 # Options other than above can be set with $milterdkim_flags.
 # see dkim-milter documentation for detail.
-: ${milterdkim_flags=""}
 
 if [ -n "$2" ]; then
     profile="$2"
diff --git a/mail/drac/files/dracd.sh.in b/mail/drac/files/dracd.sh.in
index 341c90cf6aca..e7e1eeceb65e 100644
--- a/mail/drac/files/dracd.sh.in
+++ b/mail/drac/files/dracd.sh.in
@@ -22,7 +22,6 @@ command="%%PREFIX%%/sbin/rpc.dracd"
 load_rc_config $name
 
 : ${dracd_enable="NO"}
-: ${dracd_flags=""}
 
 required_files="%%PREFIX%%/etc/dracd.allow"
 
diff --git a/mail/mailscanner-devel/files/mta.in b/mail/mailscanner-devel/files/mta.in
index fb3f433cbff7..7f24a03b9d01 100644
--- a/mail/mailscanner-devel/files/mta.in
+++ b/mail/mailscanner-devel/files/mta.in
@@ -69,7 +69,6 @@ load_rc_config $name
 
 : ${mta_enable="NO"}
 : ${mta_type="sendmail"}
-: ${mta_flags=""}
 
 case "${mta_type}" in
 
diff --git a/mail/mailscanner/files/mta.in b/mail/mailscanner/files/mta.in
index fb3f433cbff7..7f24a03b9d01 100644
--- a/mail/mailscanner/files/mta.in
+++ b/mail/mailscanner/files/mta.in
@@ -69,7 +69,6 @@ load_rc_config $name
 
 : ${mta_enable="NO"}
 : ${mta_type="sendmail"}
-: ${mta_flags=""}
 
 case "${mta_type}" in
 
diff --git a/mail/milter-regex/files/milterregex.sh.in b/mail/milter-regex/files/milterregex.sh.in
index 969e4cb6a0b1..74d0a72f25cf 100644
--- a/mail/milter-regex/files/milterregex.sh.in
+++ b/mail/milter-regex/files/milterregex.sh.in
@@ -8,13 +8,7 @@
 # REQUIRE: DAEMON
 # BEFORE: mail
 # KEYWORD: shutdown
-#
-# NOTE for FreeBSD 5.0 through 6.0:
-# If you want this script to start with the base rc scripts
-# move milterregex to /etc/rc.d/milterregex
-# Not necessary for 6.1+
 
-prefix=%%PREFIX%%
 spooldir=%%SPOOLDIR%%
 
 # Define these milterregex_* variables in one of these files:
@@ -25,16 +19,15 @@ spooldir=%%SPOOLDIR%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 [ -z "$milterregex_enable" ] && milterregex_enable="NO"	# Enable milter-regex
-#milterregex_program="${prefix}/libexec/milter-regex"	# Location of milter-regex
-[ -z "$milterregex_flags" ] && milterregex_flags="" # Flags to milter-regex program
+# milterregex_flags="" # Flags to milter-regex program
 
 . /etc/rc.subr
 
 name="milterregex"
 rcvar=`set_rcvar`
-command="${prefix}/libexec/milter-regex"
+command="%%PREFIX%%/libexec/milter-regex"
 pidfile="${spooldir}/milter-regex.pid"
-required_files="${prefix}/etc/milter-regex.conf"
+required_files="%%PREFIX%%/etc/milter-regex.conf"
 stop_postcmd="milterregex_poststop"
 
 milterregex_poststop() {
diff --git a/mail/noattach/files/noattach.sh.in b/mail/noattach/files/noattach.sh.in
index 5bccc1f557b7..4e32b95f33aa 100644
--- a/mail/noattach/files/noattach.sh.in
+++ b/mail/noattach/files/noattach.sh.in
@@ -10,8 +10,6 @@
 # KEYWORD: shutdown
 #
 
-prefix=%%PREFIX%%
-
 # Define these noattach_* variables in one of these files:
 #	/etc/rc.conf
 #	/etc/rc.conf.local
@@ -22,14 +20,14 @@ prefix=%%PREFIX%%
 noattach_enable=${noattach_enable:-"NO"}      # Enable noattach
 noattach_pidfile=${noattach_pidfile:-"/var/run/noattach.pid"} # Path to pidfile
 noattach_socket=${noattach_socket:-"/var/run/noattach"} # Path to socket
-noattach_flags=${noattach_flags:-""} # Flags to noattach
+# noattach_flags="" # Flags to noattach
 
 . /etc/rc.subr
 
 name="noattach"
 rcvar=`set_rcvar`
-command="${prefix}/libexec/${name}"
-required_files="${prefix}/etc/noattach.patterns"
+command="%%PREFIX%%/libexec/${name}"
+required_files="%%PREFIX%%/etc/noattach.patterns"
 start_precmd="noattach_prestart"
 stop_postcmd="noattach_poststop"
 reload_cmd="noattach_reload"
@@ -52,5 +50,3 @@ pidfile="${noattach_pidfile}"
 command_args="-p local:${noattach_socket} ${noattach_flags}"
 
 run_rc_command "$1"
-
-# eof
diff --git a/mail/perdition/files/perdition.imap4.in b/mail/perdition/files/perdition.imap4.in
index 2b02deb2a823..ecf021ef9f3b 100644
--- a/mail/perdition/files/perdition.imap4.in
+++ b/mail/perdition/files/perdition.imap4.in
@@ -9,12 +9,12 @@
 # Add the following line to /etc/rc.conf to enable perdition.imap4
 #
 # perdition_imap4_enable="YES"
+# perdition_imap4_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_imap4_enable=${perdition_imap4_enable-"NO"}
-perdition_imap4_flags=${perdition_imap4_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/perdition/files/perdition.imap4s.in b/mail/perdition/files/perdition.imap4s.in
index 6a03483202ff..dce3c92fd9e5 100644
--- a/mail/perdition/files/perdition.imap4s.in
+++ b/mail/perdition/files/perdition.imap4s.in
@@ -9,12 +9,12 @@
 # Add the following line to /etc/rc.conf to enable perdition.imap4s
 #
 # perdition_imap4s_enable="YES"
+# perdition_imap4s_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_imap4s_enable=${perdition_imap4s_enable-"NO"}
-perdition_imap4s_flags=${perdition_imap4s_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/perdition/files/perdition.imaps.in b/mail/perdition/files/perdition.imaps.in
index 79413b5d5308..9ff3d9bbabe6 100644
--- a/mail/perdition/files/perdition.imaps.in
+++ b/mail/perdition/files/perdition.imaps.in
@@ -9,12 +9,12 @@
 # Add the following line to /etc/rc.conf to enable perdition.imaps
 #
 # perdition_imaps_enable="YES"
+# perdition_imaps_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_imaps_enable=${perdition_imaps_enable-"NO"}
-perdition_imaps_flags=${perdition_imaps_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/perdition/files/perdition.in b/mail/perdition/files/perdition.in
index 86cc85822640..0243270943b1 100644
--- a/mail/perdition/files/perdition.in
+++ b/mail/perdition/files/perdition.in
@@ -6,15 +6,15 @@
 # REQUIRE: DAEMON
 # KEYWORD: shutdown
 #
-# Add the following line to /etc/rc.conf to enable perdition
+# Add the following lines to /etc/rc.conf to enable perdition
 #
 # perdition_enable="YES"
+# perdition_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_enable=${perdition_enable-"NO"}
-perdition_flags=${perdition_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/perdition/files/perdition.pop3.in b/mail/perdition/files/perdition.pop3.in
index c22af3346900..1f73c25fe5a1 100644
--- a/mail/perdition/files/perdition.pop3.in
+++ b/mail/perdition/files/perdition.pop3.in
@@ -6,15 +6,15 @@
 # REQUIRE: DAEMON
 # KEYWORD: shutdown
 #
-# Add the following line to /etc/rc.conf to enable perdition.pop3
+# Add the following lines to /etc/rc.conf to enable perdition.pop3
 #
 # perdition_pop3_enable="YES"
+# perdition_pop3_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_pop3_enable=${perdition_pop3_enable-"NO"}
-perdition_pop3_flags=${perdition_pop3_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/perdition/files/perdition.pop3s.in b/mail/perdition/files/perdition.pop3s.in
index 78e41a1802c4..26f3cbd1d5ff 100644
--- a/mail/perdition/files/perdition.pop3s.in
+++ b/mail/perdition/files/perdition.pop3s.in
@@ -6,15 +6,15 @@
 # REQUIRE: DAEMON
 # KEYWORD: shutdown
 #
-# Add the following line to /etc/rc.conf to enable perdition.pop3s
+# Add the following lines to /etc/rc.conf to enable perdition.pop3s
 #
 # perdition_pop3s_enable="YES"
+# perdition_pop3s_flags="<set as needed>"
 #
 # See perdition(8) for flags
 #
 
 perdition_pop3s_enable=${perdition_pop3s_enable-"NO"}
-perdition_pop3s_flags=${perdition_pop3s_flags-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/postfix-current/files/postfix.sh.in b/mail/postfix-current/files/postfix.sh.in
index 2b07d6c85c1d..c0065f1d4b9c 100644
--- a/mail/postfix-current/files/postfix.sh.in
+++ b/mail/postfix-current/files/postfix.sh.in
@@ -28,7 +28,6 @@ load_rc_config $name
 : ${postfix_enable="NO"}
 : ${postfix_pidfile="/var/spool/postfix/pid/master.pid"}
 : ${postfix_procname="%%PREFIX%%/libexec/postfix/master"}
-: ${postfix_flags=""}
 
 start_cmd=${name}_start
 stop_cmd=${name}_stop
diff --git a/mail/postfix23/files/postfix.sh.in b/mail/postfix23/files/postfix.sh.in
index 2b07d6c85c1d..c0065f1d4b9c 100644
--- a/mail/postfix23/files/postfix.sh.in
+++ b/mail/postfix23/files/postfix.sh.in
@@ -28,7 +28,6 @@ load_rc_config $name
 : ${postfix_enable="NO"}
 : ${postfix_pidfile="/var/spool/postfix/pid/master.pid"}
 : ${postfix_procname="%%PREFIX%%/libexec/postfix/master"}
-: ${postfix_flags=""}
 
 start_cmd=${name}_start
 stop_cmd=${name}_stop
diff --git a/mail/postfix24/files/postfix.sh.in b/mail/postfix24/files/postfix.sh.in
index 2b07d6c85c1d..c0065f1d4b9c 100644
--- a/mail/postfix24/files/postfix.sh.in
+++ b/mail/postfix24/files/postfix.sh.in
@@ -28,7 +28,6 @@ load_rc_config $name
 : ${postfix_enable="NO"}
 : ${postfix_pidfile="/var/spool/postfix/pid/master.pid"}
 : ${postfix_procname="%%PREFIX%%/libexec/postfix/master"}
-: ${postfix_flags=""}
 
 start_cmd=${name}_start
 stop_cmd=${name}_stop
diff --git a/mail/py-apolicy/files/apolicyd.in b/mail/py-apolicy/files/apolicyd.in
index 07cf41bc9648..bcd1f480387a 100644
--- a/mail/py-apolicy/files/apolicyd.in
+++ b/mail/py-apolicy/files/apolicyd.in
@@ -6,22 +6,21 @@
 # PROVIDE: apolicyd
 # REQUIRE: TWISTD
 # KEYWORD: shutdown
-#
-prefix=%%PREFIX%%
+
 
 # Define these apolicyd_* variables in one of these files:
 #       /etc/rc.conf
 #       /etc/rc.conf.local
 #
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
-#
+
 
 . %%RC_SUBR%%
 
 name="apolicyd"
 rcvar=`set_rcvar`
 
-command="%%LOCALBASE%%/bin/twistd"
+command="%%PREFIX%%/bin/twistd"
 pidfile="/var/run/apolicyd.pid"
 logfile="/var/log/apolicyd.log"
 
diff --git a/mail/py-ppolicy/files/ppolicyd.sh.in b/mail/py-ppolicy/files/ppolicyd.sh.in
index d234961fb03d..c1592221b35f 100644
--- a/mail/py-ppolicy/files/ppolicyd.sh.in
+++ b/mail/py-ppolicy/files/ppolicyd.sh.in
@@ -6,15 +6,12 @@
 # PROVIDE: ppolicyd
 # REQUIRE: TWISTD
 # KEYWORD: shutdown
-#
-prefix=%%PREFIX%%
 
 # Define these ppolicyd_* variables in one of these files:
 #       /etc/rc.conf
 #       /etc/rc.conf.local
 #
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
-#
 
 . %%RC_SUBR%%
 
diff --git a/mail/rbl-milter/files/rblmilter.sh.in b/mail/rbl-milter/files/rblmilter.sh.in
index f09d159393b8..d5918b855cd4 100644
--- a/mail/rbl-milter/files/rblmilter.sh.in
+++ b/mail/rbl-milter/files/rblmilter.sh.in
@@ -10,8 +10,6 @@
 # KEYWORD: shutdown
 #
 
-prefix=%%PREFIX%%
-
 # Define these rblmilter_* variables in one of these files:
 #	/etc/rc.conf
 #	/etc/rc.conf.local
@@ -27,7 +25,7 @@ rblmilter_flags=${rblmilter_flags:-"-l -r -d relays.ordb.org"} # Flags to rblmil
 
 name="rblmilter"
 rcvar=`set_rcvar`
-command="${prefix}/sbin/rbl-milter"
+command="%%PREFIX%%/sbin/rbl-milter"
 start_precmd="rblmilter_prestart"
 stop_postcmd="rblmilter_poststop"
 extra_commands="reload"
diff --git a/mail/spamd/files/obspamd.in b/mail/spamd/files/obspamd.in
index eac1fb373e5a..21ab92820d4d 100644
--- a/mail/spamd/files/obspamd.in
+++ b/mail/spamd/files/obspamd.in
@@ -19,7 +19,6 @@
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 obspamd_enable=${obspamd_enable:-"NO"}
-obspamd_flags=${obspamd_flags:-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/spamd/files/obspamlogd.in b/mail/spamd/files/obspamlogd.in
index 53fb60a3be99..89b4b2b8648c 100644
--- a/mail/spamd/files/obspamlogd.in
+++ b/mail/spamd/files/obspamlogd.in
@@ -19,7 +19,6 @@
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 obspamlogd_enable=${obspamlogd_enable:-"NO"}
-obspamlogd_flags=${obspamlogd_flags:-""}
 
 . %%RC_SUBR%%
 
diff --git a/mail/spamilter/files/spamilter.sh.in b/mail/spamilter/files/spamilter.sh.in
index d1247ce5ea33..0a1cde8fd371 100644
--- a/mail/spamilter/files/spamilter.sh.in
+++ b/mail/spamilter/files/spamilter.sh.in
@@ -10,8 +10,6 @@
 # KEYWORD: shutdown
 #
 
-prefix=%%PREFIX%%
-
 # Define these spamilter_* variables in one of these files:
 #	/etc/rc.conf
 #	/etc/rc.conf.local
@@ -20,15 +18,15 @@ prefix=%%PREFIX%%
 # DO NOT CHANGE THESE DEFAULT VALUES HERE
 #
 spamilter_enable=${spamilter_enable:-"NO"}      # Enable spamilter-milter
-spamilter_flags=${spamilter_flags:-""} # Flags to spamilter
+# spamilter_flags="" # Flags to spamilter
 
 . /etc/rc.subr
 
 name="spamilter"
 rcvar=`set_rcvar`
-command="${prefix}/bin/spamilter"
+command="%%PREFIX%%/bin/spamilter"
 pidfile="/tmp/Spamilter.pid"
-required_files="${prefix}/etc/spamilter.rc"
+required_files="%%PREFIX%%/etc/spamilter.rc"
 start_precmd="spamilter_prestart"
 stop_postcmd="spamilter_poststop"
 
@@ -42,8 +40,4 @@ spamilter_poststop() {
 
 load_rc_config $name
 
-command_args="${spamilter_flags}"
-
 run_rc_command "$1"
-
-# eof
diff --git a/mail/spampd/files/spampd.in b/mail/spampd/files/spampd.in
index a56add6ec45f..974d78a6c44b 100644
--- a/mail/spampd/files/spampd.in
+++ b/mail/spampd/files/spampd.in
@@ -23,7 +23,7 @@ rcvar=`set_rcvar`
 load_rc_config $name
 
 command="%%PREFIX%%/sbin/$name"
-command_args="${spampd_flags} --pid=${spampd_pidfile}"
+command_args="--pid=${spampd_pidfile}"
 pidfile="${spampd_pidfile}"
 sig_stop="-KILL"
 stop_cmd="stop_cmd"
diff --git a/mail/vbsfilter/files/vbsfilter.sh.in b/mail/vbsfilter/files/vbsfilter.sh.in
index 72c1685f342e..5183e486cf56 100644
--- a/mail/vbsfilter/files/vbsfilter.sh.in
+++ b/mail/vbsfilter/files/vbsfilter.sh.in
@@ -10,8 +10,6 @@
 # KEYWORD: shutdown
 #
 
-prefix=%%PREFIX%%
-
 # Define these vbsfilter_* variables in one of these files:
 #	/etc/rc.conf
 #	/etc/rc.conf.local
@@ -21,13 +19,13 @@ prefix=%%PREFIX%%
 #
 vbsfilter_enable=${vbsfilter_enable:-"NO"}      # Enable vbsfilter-milter
 vbsfilter_socket=${vbsfilter_socket:-"/var/run/vbsfilter"} # Path to socket
-vbsfilter_flags=${vbsfilter_flags:-""} # Flags to vbsfilter
+# vbsfilter_flags="" # Flags to vbsfilter
 
 . /etc/rc.subr
 
 name="vbsfilter"
 rcvar=`set_rcvar`
-command="${prefix}/libexec/vbsfilter"
+command="%%PREFIX%%/libexec/vbsfilter"
 procname="${command}"
 start_precmd="vbsfilter_prestart"
 stop_postcmd="vbsfilter_poststop"
@@ -42,7 +40,7 @@ vbsfilter_poststop() {
 
 load_rc_config $name
 
-command_args="-p local:${vbsfilter_socket} ${vbsfilter_flags}"
+command_args="-p local:${vbsfilter_socket}"
 
 run_rc_command "$1"