Install a man page for this.

3 files changed, 443 insertions, 1 deletions

diff --git a/net/ztelnet/Makefile b/net/ztelnet/Makefile
index a4e44e91f724..0aaaa9d21c73 100644
--- a/net/ztelnet/Makefile
+++ b/net/ztelnet/Makefile
@@ -3,7 +3,7 @@
 # Date created:         15 Mar 1998
 # Whom:                 CHOI Junho <junker@jazz.snu.ac.kr>
 #
-# $Id$
+# $Id: Makefile,v 1.3 1998/03/16 07:22:11 steve Exp $
 #
 # In this ports..
 #   - new compilation diff for FreeBSD(now we can upload!)
@@ -20,6 +20,7 @@ MAINTAINER=	junker@jazz.snu.ac.kr
 
 NO_WRKSUBDIR=	yes
 PATCH_STRIP=	-p1
+MAN1=			ztelnet.1
 
 post-patch:
 	@( cd ${WRKSRC}/ztelnet && \
@@ -35,5 +36,6 @@ do-install:
 	@cd ${WRKSRC}/ztelnet; \
 	${MKDIR} ${PREFIX}/bin; \
 	${INSTALL_PROGRAM} telnet/telnet ${PREFIX}/bin/ztelnet
+	${INSTALL_MAN} ${WRKDIR}/ztelnet/telnet/telnet.1 ${PREFIX}/man/man1/ztelnet.1
 
 .include <bsd.port.mk>
diff --git a/net/ztelnet/files/patch-ba b/net/ztelnet/files/patch-ba
new file mode 100644
index 000000000000..8706170defbf
--- /dev/null
+++ b/net/ztelnet/files/patch-ba
@@ -0,0 +1,439 @@
+--- ../ztelnet/telnet/telnet.1.orig	Wed Mar 18 10:54:02 1998
++++ ../ztelnet/telnet/telnet.1	Wed Mar 18 10:59:53 1998
+@@ -18,15 +18,15 @@
+ .\"     @(#)telnet.1	6.13 (Berkeley) 7/28/90
+ .\"
+ .Dd July 28, 1990
+-.Dt TELNET 1
++.Dt ZTELNET 1
+ .Os BSD 4.2
+ .Sh NAME
+-.Nm telnet
++.Nm ztelnet
+ .Nd User interface to the 
+ .Li TELNET
+-protocol
++protocol, with support for Zmodem file transfers.
+ .Sh SYNOPSIS
+-.Nm telnet
++.Nm ztelnet
+ .Op Fl 8
+ .Op Fl E
+ .Op Fl K
+@@ -47,23 +47,32 @@
+ .Oe
+ .Sh DESCRIPTION
+ The
+-.Nm telnet
++.Nm ztelnet
+ command
+ is used to communicate with another host using the 
+ .Li TELNET
+ protocol.
+ If
+-.Nm telnet
++.Nm ztelnet
+ is invoked without the
+ .Ar host
+ argument, it enters command mode,
+ indicated by its prompt
+-.Pq Nm telnet\&> .
++.Pq Nm ztelnet\&> .
+ In this mode, it accepts and executes the commands listed below.
+ If it is invoked with arguments, it performs an
+ .Ic open
+ command with those arguments.
+ .Pp
++To perform Zmodem file transfers, issue the appropriate Zmodem command on
++the remote host.  Then hit the
++.Nm
++command line escape key (^]) and issue the appropriate Zmodem command for
++the local host.  Typically these commands would be
++.Nm sz
++and 
++.Nm rz .
++.Pp
+ Options:
+ .Tw Fl
+ .Tp Fl 8
+@@ -116,7 +125,7 @@
+ .Cx
+ Sets the initial
+ .Nm
+-.B telnet
++.B ztelnet
+ escape character to
+ .Ar escape char.
+ If
+@@ -130,7 +139,7 @@
+ If Kerberos authentication is being used, the
+ .Fl k
+ option requests that
+-.Nm telnet
++.Nm ztelnet
+ obtain tickets for the remote host in realm
+ .Ar realm
+ instead of the remote host's
+@@ -175,13 +184,13 @@
+ .Tp Ar port
+ Indicates a port number (address of an application) or name.  If a number is
+ not specified, the default
+-.Nm telnet
++.Nm ztelnet
+ port is used.
+ Port names are mapped to port numbers via the
+ /etc/services
+ file.
+ Normally when a port number is specified,
+-.Nm telnet
++.Nm ztelnet
+ will not send out any initial
+ .Li TELNET
+ option negotiation.
+@@ -199,19 +208,19 @@
+ .Nm
+ escape character.
+ Similarly, the line ``~^Z'' will suspend the
+-.Nm telnet
++.Nm ztelnet
+ session.
+ The line ``~^]'' will escape to the normal
+-.Nm telnet
++.Nm ztelnet
+ escape prompt.
+ .Pp
+ Once a connection has been opened,
+-.Nm telnet
++.Nm ztelnet
+ will attempt to enable the
+ .Li TELNET LINEMODE
+ option.
+ If this fails, then
+-.Nm telnet
++.Nm ztelnet
+ will revert to one of two input modes:
+ either \*(Lqcharacter at a time\*(Rq
+ or \*(Lqold line by line\*(Rq
+@@ -281,15 +290,15 @@
+ .Ic intr  ) .
+ .Pp
+ While connected to a remote host,
+-.Nm telnet
++.Nm ztelnet
+ command mode may be entered by typing the
+-.Nm telnet
++.Nm ztelnet
+ \*(Lqescape character\*(Rq (initially \*(Lq^
+ \*(Rq).
+ When in command mode, the normal terminal editing conventions are available.
+ .Pp
+ The following
+-.Nm telnet
++.Nm ztelnet
+ commands are available.
+ Only enough of each command to uniquely identify it need be typed
+ (this is also true for most of the arguments to the
+@@ -659,7 +668,7 @@
+ Open a connection to the named host.
+ If no port number
+ is specified,
+-.Nm telnet
++.Nm ztelnet
+ will attempt to contact a
+ .Li TELNET
+ server at the default port.
+@@ -674,7 +683,7 @@
+ .Li ENVIRON
+ option.
+ When connecting to a non-standard port,
+-.Nm telnet
++.Nm ztelnet
+ omits any automatic initiation of
+ .Li TELNET
+ options.  When the port number is preceded by a minus sign,
+@@ -696,10 +705,10 @@
+ first thing on the line is the name of the machine that is
+ being connected to.  The rest of the line, and successive
+ lines that begin with whitespace are assumed to be
+-.Nm telnet
++.Nm ztelnet
+ commands and are processed as if they had been typed
+ in manually to the
+-.Nm telnet
++.Nm ztelnet
+ command prompt.
+ The special machine name
+ .Ic DEFAULT
+@@ -714,7 +723,7 @@
+ Close any open
+ .Li TELNET
+ session and exit
+-.Nm telnet  .
++.Nm ztelnet  .
+ An end of file (in command mode) will also close a session and exit.
+ .\" ######## END the "quit" command
+ .\"
+@@ -776,7 +785,7 @@
+ sequence.
+ .Tp Ic escape
+ Sends the current
+-.Nm telnet
++.Nm ztelnet
+ escape character (initially \*(Lq^\*(Rq).
+ .Tp Ic ga
+ Sends the
+@@ -833,7 +842,7 @@
+ The
+ .Ic set
+ command will set any one of a number of
+-.Nm telnet
++.Nm ztelnet
+ variables to a specific value or to TRUE.
+ The special value
+ .Ic off
+@@ -859,7 +868,7 @@
+ .Tw Fl
+ .Tp Ic ayt
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode, or
+@@ -884,7 +893,7 @@
+ echoing of entered characters (for entering, say, a password).
+ .Tp Ic eof
+ If
+-.Nm telnet
++.Nm ztelnet
+ is operating in
+ .Li LINEMODE
+ or \*(Lqold line by line\*(Rq mode, entering this character
+@@ -895,7 +904,7 @@
+ character.
+ .Tp Ic erase
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode (see
+@@ -904,7 +913,7 @@
+ below),
+ .Sy and
+ if
+-.Nm telnet
++.Nm ztelnet
+ is operating in \*(Lqcharacter at a time\*(Rq mode, then when this
+ character is typed, a
+ .Li TELNET EC
+@@ -919,14 +928,14 @@
+ character.
+ .Tp Ic escape
+ This is the
+-.Nm telnet
++.Nm ztelnet
+ escape character (initially \*(Lq^[\*(Rq) which causes entry
+ into
+-.Nm telnet
++.Nm ztelnet
+ command mode (when connected to a remote system).
+ .Tp Ic flushoutput
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode (see
+@@ -949,7 +958,7 @@
+ .Tp Ic forw1
+ .Tp Ic forw2
+ If
+-.Nm telnet
++.Nm ztelnet
+ is operating in
+ .Li LINEMODE,
+ these are the characters that, when typed,
+@@ -962,7 +971,7 @@
+ characters.
+ .Tp Ic interrupt
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode (see
+@@ -984,7 +993,7 @@
+ character.
+ .Tp Ic kill
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode (see
+@@ -993,7 +1002,7 @@
+ below),
+ .Ic and
+ if
+-.Nm telnet
++.Nm ztelnet
+ is operating in \*(Lqcharacter at a time\*(Rq mode, then when this
+ character is typed, a
+ .Li TELNET EL
+@@ -1008,7 +1017,7 @@
+ character.
+ .Tp Ic lnext
+ If
+-.Nm telnet
++.Nm ztelnet
+ is operating in
+ .Li LINEMODE
+ or \*(Lqold line by line\*(Lq mode, then this character is taken to
+@@ -1021,7 +1030,7 @@
+ character.
+ .Tp Ic quit
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode (see
+@@ -1043,7 +1052,7 @@
+ character.
+ .Tp Ic reprint
+ If
+-.Nm telnet
++.Nm ztelnet
+ is operating in
+ .Li LINEMODE
+ or \*(Lqold line by line\*(Lq mode, then this character is taken to
+@@ -1057,14 +1066,14 @@
+ .Tp Ic rlogin
+ This is the rlogin escape character.
+ If set, the normal
+-.Nm telnet
++.Nm ztelnet
+ .Ic escape
+ character will be ignored unless it is preceded by this character
+ at the beginning of a line.
+ This character, at the beginning of a line, followed by a ``.''
+ will close the connection; when followed by a ``^Z'' it will
+ suspend the
+-.Nm telnet
++.Nm ztelnet
+ command.
+ The initial state is to have the
+ .Ic rlogin
+@@ -1095,7 +1104,7 @@
+ character.
+ .Tp Ic susp
+ If
+-.Nm telnet
++.Nm ztelnet
+ is in
+ .Ic localchars
+ mode, or
+@@ -1124,7 +1133,7 @@
+ then tracing information will be written to standard output (the default).
+ .Tp Ic worderase
+ If
+-.Nm telnet
++.Nm ztelnet
+ is operating in
+ .Li LINEMODE
+ or \*(Lqold line by line\*(Lq mode, then this character is taken to
+@@ -1172,7 +1181,7 @@
+ Switch to the local defaults for the special characters.  The
+ local default characters are those of the local terminal at
+ the time when
+-.Nm telnet
++.Nm ztelnet
+ was started.
+ .Tp Ic import
+ Switch to the remote defaults for the special characters.
+@@ -1195,7 +1204,7 @@
+ .\" ######## BEGIN the "status" command
+ .Tp Ic status
+ Show the current status of
+-.Nm telnet  .
++.Nm ztelnet  .
+ This includes the peer one is connected to, as well
+ as the current mode.
+ .\" ######## END the "status" command
+@@ -1210,7 +1219,7 @@
+ and
+ FALSE)
+ various flags that control how
+-.Nm telnet
++.Nm ztelnet
+ responds to events.
+ These flags may be set explicitly to TRUE or FALSE
+ using the
+@@ -1242,7 +1251,7 @@
+ sequences; see
+ .Ic set
+ above for details),
+-.Nm telnet
++.Nm ztelnet
+ refuses to display any data on the user's terminal
+ until the remote system acknowledges (via a
+ .Li TELNET TIMING MARK
+@@ -1269,7 +1278,7 @@
+ If the
+ .Li TELNET AUTHENTICATION
+ option is supported by the remote side, then
+-.Nm telnet
++.Nm ztelnet
+ will attempt to use it to perform automatic authentication.
+ If the
+ .Li AUTHENTICATION
+@@ -1395,7 +1404,7 @@
+ The initial value for this toggle is FALSE.
+ .Tp Ic options
+ Toggles the display of some internal
+-.Nm telnet
++.Nm ztelnet
+ protocol processing (having to do with
+ .Li TELNET
+ options).
+@@ -1421,7 +1430,7 @@
+ .Ic skiprc
+ toggle
+ is TRUE, then
+-.Nm telnet
++.Nm ztelnet
+ will skip the reading of the
+ .Pa \&.telnetrc
+ file in the users home directory
+@@ -1434,7 +1443,7 @@
+ When the
+ .Ic verbose_encrypt
+ toggle is TRUE, then
+-.Nm telnet
++.Nm ztelnet
+ will print out a message each time encryption is
+ enabled or disabled.
+ The initial value for this toggle is FALSE.
+@@ -1448,7 +1457,7 @@
+ .\" ######## BEGIN the "z" command
+ .Tp Ic z
+ Suspend
+-.Nm telnet  .
++.Nm ztelnet  .
+ This command only works when the user is using the
+ .Xr csh  1  .
+ .\" ######## END the "z" command
+@@ -1471,10 +1480,10 @@
+ .Op Ar command
+ .Cx
+ Get help.  With no arguments,
+-.Nm telnet
++.Nm ztelnet
+ prints a help summary.
+ If a command is specified,
+-.Nm telnet
++.Nm ztelnet
+ will print the help information for just that command.
+ .\" ######## END the "!" command
+ .Sh ENVIRONMENT
diff --git a/net/ztelnet/pkg-plist b/net/ztelnet/pkg-plist
index 4a727ab63d1b..1d96b078c0f3 100644
--- a/net/ztelnet/pkg-plist
+++ b/net/ztelnet/pkg-plist
@@ -1 +1,2 @@
 bin/ztelnet
+man/man1/ztelnet.1.gz