[MAINTAINER] net/py23-BitTornado: [SUMMARIZE CHANGES]

    - Added manual pages from Debian Linux.
    - Added sample script that can be used as startup/stop script for
    Bittorrent sites (hopefully will be integrated in $PREFIX/etc/rc.d/ once
    (but first I need some feedback)
    - Added proper IPv6 support - removing compact=1 from announcements.
    (If you want you can test it at http://6net.nii.hu:6969)

PR:		ports/71736
Submitted by:	Janos Mohacsi <janos.mohacsi@bsd.hu>

18 files changed, 2022 insertions, 0 deletions

diff --git a/net/py-bittornado/Makefile b/net/py-bittornado/Makefile
index f7223c7b8665..4687f3845453 100644
--- a/net/py-bittornado/Makefile
+++ b/net/py-bittornado/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME=	BitTornado
 PORTVERSION=	0.3.7
+PORTREVISION=	1
 PORTEPOCH=	1
 CATEGORIES?=	net python ipv6
 MASTER_SITES=	http://e.scarywater.net/bt/download/ \
@@ -30,6 +31,11 @@ DOC_FILES=	BUILD.windows.txt FAQ.txt IMPORTANT-multitracker-readme.txt \
 		README-experimental.txt credits.txt multitracker-spec.txt \
 		README-Psyco.txt todo.txt webseed-spec.txt
 EXTRA_DOC_FILES=	multitracker/README.txt
+MAN1=		bittorrent-downloader.1 bittorrent-multi-downloader.1 \
+		btcompletedir.1 btcopyannounce.1 btdownloadcurses.1 \
+		btdownloadheadless.1 btlaunchmany.1 btlaunchmanycurses.1 \
+		btmakemetafile.1 btreannounce.1 btrename.1 btsethttpseeds.1 \
+		btshowmetainfo.1 bttrack.1
 
 # required for GUI
 .ifndef(WITHOUT_GUI)
@@ -40,6 +46,11 @@ EXTRA_PATCHES+=	${FILESDIR}/extra-gui-patch-setup.py
 EXTRA_PATCHES+=	${FILESDIR}/extra-nogui-patch-setup.py
 PLIST_SUB+=	GUI='@comment '
 .endif
+.ifdef(WITH_IPV6)
+#disable compact announcement that is incompatible with IPv6
+#tracker does not patched to honor compact announcements
+EXTRA_PATCHES+=	${FILESDIR}/extra-patch-BitTornado_BT1_Rerequester.py
+.endif
 
 .ifdef(WITH_PSYCO)
 RUN_DEPENDS+=	${PYTHON_SITELIBDIR}/psyco/_psyco.so:${PORTSDIR}/devel/py-psyco
@@ -55,6 +66,10 @@ pre-everything::
 .ifndef(WITH_PSYCO)
 	@${ECHO_MSG} '===> Define WITH_PSYCO to enable the optimizing Python compiler'
 .endif
+.ifndef(WITH_IPV6)
+	@${ECHO_MSG} '===> Define WITH_IPV6 to enable IPv6 support properly'
+	@${ECHO_MSG} 'with trade-off of more memory usage'
+.endif
 
 post-install:
 .ifndef(NOPORTDOCS)
@@ -65,6 +80,13 @@ post-install:
 .for file in ${EXTRA_DOC_FILES}
 	${INSTALL_DATA} ${WRKSRC}/${file} ${DOCSDIR}/`${ECHO} ${file} | ${SED} -e 's|/|_|g'`
 .endfor
+	${MKDIR} ${EXAMPLESDIR}
+	${INSTALL_DATA} ${FILESDIR}/bittornado.sh.sample ${EXAMPLESDIR}
+.endif
+.ifndef(NO_INSTALL_MANPAGES)
+.for file in ${MAN1}
+	${INSTALL_MAN} ${FILESDIR}/${file} ${PREFIX}/man/man1
+.endfor
 .endif
 
 .include <bsd.port.mk>
diff --git a/net/py-bittornado/files/bittornado.sh.sample b/net/py-bittornado/files/bittornado.sh.sample
new file mode 100644
index 000000000000..22bb4d48b60d
--- /dev/null
+++ b/net/py-bittornado/files/bittornado.sh.sample
@@ -0,0 +1,101 @@
+#!/bin/sh
+#Sample startup file for Bittornado sites
+
+#PATH to be used. To be safe
+PATH=/usr/local/bin:/bin:/usr/bin
+#tracker daemon
+DAEMON=/usr/local/bin/bttrack.py
+#seed daemon
+LAUNCH=/usr/local/bin/btlaunchmany.py
+#mate file creator
+MAKEMETA=/usr/local/bin/btmakemetafile.py
+#state file of the Bittornado tracker (inside TORRENTSDIR)
+DFILE=connected.txt
+#ports to be used by tracker
+PORT=6969
+#description strings
+DESC1="bittornado tracker"
+DESC2="bittornado launcher"
+#Owner of the torrent files to be served by web server
+TORRENTOWNER="www:www"
+#TORRENTSWWWDIR - the directory served by Web server
+TORRENTSWWWDIR=/usr/local/www/torrent/
+#TORRENTSDIR - the directory where you store served files and torrents
+TORRENTSDIR=/home/iso/
+#URL of TRACKER
+#change it to your server
+SERVER=http://6net.niif.hu:${PORT}
+#Configuration file where you can store your local changes
+CONFIG_FILE=/usr/local/etc/bittornado.conf
+#options to be used by the tracker
+#if you want experimental IPv6 support add --ipv6_enabled 1
+#TRACKEROPTIONS="--dfile ./$DFILE --port $PORT --ipv6_enabled 1"
+TRACKEROPTIONS="--dfile ./$DFILE --port $PORT"
+#options to be used by seeders
+#if you want experimental IPv6 support add --ipv6_enabled 1
+#DOWNLOADOPTIONS="--ipv6_enabled 1"
+DOWNLOADOPTIONS=""
+#log file to be used by tracker and seeder
+TORRENTLOG="/tmp/torrent.log"
+
+if [ -s $CONFIG_FILE ]; then
+    . $CONFIG_FILE
+fi
+test -f $DAEMON || exit 0
+cd $TORRENTSDIR
+set -e
+
+case "$1" in
+  make)
+  echo "Making torrents: "
+    rm -f ${TORRENTSDIR}/*.torrent
+    for file in ${TORRENTSDIR}/*
+    do
+      base=`basename $file`
+      if [ "$base" = "." ]; then
+        continue;
+      fi
+      if [ "$base" = "$DFILE" ]; then
+        continue;
+      fi
+      echo $MAKEMETA $SERVER/announce $file
+      $MAKEMETA $SERVER/announce $file
+    done
+    #copy to be able to serve via WWW interface
+    cp ${TORRENTSDIR}/*.torrent $TORRENTSWWWDIR
+  chown ${TORRENTOWNER} ${TORRENTSWWWDIR}/*
+  echo "."
+  ;;
+ start)
+  echo "Starting $DESC1: $DAEMON"
+  echo "Starting $DESC1: $DAEMON" >>${TORRENTLOG}
+  nohup $DAEMON $TRACKEROPTIONS >> ${TORRENTLOG} &
+  echo "Starting $DESC2: $LAUNCH"
+  nohup $LAUNCH $TORRENTSDIR $DOWNLOADOPTIONS >> ${TORRENTLOG} &
+  echo "."
+  ;;
+  stop)
+  echo "Stopping $DESC1: $DAEMON"
+  pkill -f `basename $DAEMON`
+  echo "Stopping $DESC1: $LAUNCH"
+  pkill -f `basename $LAUNCH`
+  echo "."
+  ;;
+  restart|force-reload)
+  echo "Stopping $DESC1: $DAEMON"
+  pkill -f `basename $DAEMON`
+  echo "Stopping $DESC1: $LAUNCH"
+  pkill -f `basename $LAUNCH`
+  echo "Starting $DESC1: $DAEMON"
+  nohup $DAEMON $TRACKEROPTIONS >> ${TORRENTLOG} &
+  echo "Starting $DESC2: $LAUNCH"
+  nohup $LAUNCH $TORRENTSDIR $DOWNLOADOPTIONS >> ${TORRENTLOG} &
+  echo "."
+  ;;
+  *)
+  echo "Usage: $0 {start|stop|restart|force-reload|make}" >&2
+  exit 1
+  ;;
+esac
+
+exit 0
diff --git a/net/py-bittornado/files/bittorrent-downloader.1 b/net/py-bittornado/files/bittorrent-downloader.1
new file mode 100644
index 000000000000..5ca148392cb3
--- /dev/null
+++ b/net/py-bittornado/files/bittorrent-downloader.1
@@ -0,0 +1,125 @@
+.TH "BITTORRENT-DOWNLOADER" 1 "Sep 24 2003"
+.SH NAME
+bittorrent-downloader \- download files using a scatter-gather network
+.SH SYNOPSIS
+.nf
+.B btdownloadheadless [ option ... ] \fIURL\fB
+.B btdownloadheadless [ option ... ] \fIfilename\fB
+.B btdownloadcurses   [ option ... ] \fIURL\fB
+.B btdownloadcurses   [ option ... ] \fIfilename\fB
+.B btdownloadgui      [ option ... ] \fIURL\fB
+.B btdownloadgui      [ option ... ] \fIfilename\fB
+.fi
+.br
+.B 
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtdownloadheadless\fP,
+\fBbtdownloadcurses\fP, and \fBbtdownloadgui\fP commands.
+.PP
+These are all programs that allow a user to download files using
+bittorrent, a peer to peer, scatter-gather network protocol.
+They all have the same options.
+.SH OPTIONS
+These programs follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of options is included below.
+.TP
+.B \-\-responsefile \fIfilename\fP
+treat \fIfilename\fP as a file which the server reponse was stored in. If this
+option is used, no filename or URL should be present on the command line.
+.TP
+.B \-\-url \fIurl\fP
+retrieve the torrent info file from \fIurl\fP.  If this option is used, no
+filename or URL should be present on the command line.
+.TP
+.B \-i \fIip\fP | \-\-ip \fIip\fP
+report \fIip\fP as your IP to the tracker
+.TP
+.B \-\-bind \fIip\fP
+bind to \fIip\fP instead of the default
+.TP
+.B \-\-minport \fIportnum\fP
+set \fIportnum\fP as the minimum port to listen on, counts up if unavailable (default 6881)
+.TP
+.B \-\-maxport \fIportnum\fP
+set \fIportnum\fP as the maximum port to listen on (default 6889)
+.TP
+.B \-\-saveas \fIfilename\fP
+store the downloaded file to \fIfilename\fP, instead of querying user (gui) or 
+using the filename stored in the torrent info file
+.TP
+.B \-\-max_uploads \fInum\fP
+Only allow \fInum\fP uploads at once (default 4)
+.TP 
+.B \-\-max_upload_rate \fIkbytes\fP
+maximum rate to upload at in kilobytes, 0 means no limit (default 0)
+.TP
+.B \-\-keepalive_interval \fIsecs\fP
+pause \fIsecs\fP seconds between sending keepalives (default 120.0)
+.TP
+.B \-\-download_slice_size \fIbytes\fP
+query for \fIbytes\fP bytes per request (default 32768)
+.TP
+.B \-\-request_backlog \fInum\fP
+keep \fInum\fP requests in a single pipe at once (default 5)
+.TP
+.B \-\-max_message_length \fIbytes\fP
+set \fIbytes\fP to the maximum length prefix encoding you'll accept over the wire - larger values get the connection dropped (default 8388608)
+.TP
+.B \-\-timeout \fIsecs\fP
+wait \fIsecs\fP before closing sockets which nothing has been recieved on (default 300.0)
+.TP
+.B \-\-timeout_check_interval \fIsecs\fP
+check whether connections have timed out every \fIsecs\fP seconds (default 60.0)
+.TP
+.B \-\-max_slice_length \fIbytes\fP
+requests from peers larger than \fIbytes\fP bytes are ignored (default 131072)
+.TP
+.B \-\-max_rate_recalculate_interval \fIsecs\fP
+connections that pause longer than \fIsecs\fP seconds are given reduced rate (default 15.0)
+.TP
+.B \-\-max_rate_period \fIsecs\fP
+set \fIsecs\fP to the maximum amount of time to guess the current rate estimate represents (default 20.0)
+.TP
+.B \-\-upload_rate_fudge \fIsecs\fP
+set the time equivalent of writing to kernel-level TCP buffer to \fIsecs\fP (default 5.0)
+.TP
+.B \-\-display_interval \fIsecs\fP
+update displayed information every \fIsecs\fP seconds (default 0.1)
+.TP
+.B \-\-rerequest_interval \fIsecs\fP
+request more peers every \fIsecs\fP seconds (default 300)
+.TP
+.B \-\-min_peers \fInum\fP
+do not rerequest if we have \fInum\fP peers already (default 20)
+.TP
+.B \-\-http_timeout \fIsecs\fP
+wait \fIsecs\fP seconds before assuming a http connection has timed out (default 60)
+.TP
+.B \-\-snub_time \fIsecs\fP
+wait \fIsecs\fP seconds for data to come in over a connection before assuming it's semi-permanently choked (default 30.0)
+.TP
+.B \-\-spew \fI 1 | 0 \fP
+whether to display diagnostic info to stdout.  This option is not useful when
+using btdownloadcurses or btdownloadgui. (default 0)
+.B \-\-max_initiate \fInum\fP
+stop initiating new connections when we have \fInum\fP peers (default 40)
+.TP
+.B \-\-check_hashes \fI 1 | 0 \fP
+whether to check hashes on disk (defaults to 1)
+.TP
+.B \-\-report_hash_failures \fI 1 | 0 \fP
+whether to report to the user that hash failuers occur (non-fatal, common error) (default 0)
+.TP 
+.B \-\-rarest_first_priority_cutoff \fInum\fP
+the number of peers which need to have a piece before other partials take
+priority over rarest first (default 3)
+
+.SH SEE ALSO
+.BR bttrack (1),
+.BR btmakemetafile (1),
+.BR btlaunchmany (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/bittorrent-multi-downloader.1 b/net/py-bittornado/files/bittorrent-multi-downloader.1
new file mode 100644
index 000000000000..0025e2e9ad1d
--- /dev/null
+++ b/net/py-bittornado/files/bittorrent-multi-downloader.1
@@ -0,0 +1,29 @@
+.TH "BITTORRENT-MULTI-DOWNLOADER" 1 "Jan 18 2003"
+.SH NAME
+bittorrent-multi-downloader \- multiple file clients for bittorrent
+.SH SYNOPSIS
+.nf
+.B btlaunchmany \fIdirname\fP [ option ... ]
+.B btlaunchmanycurses \fIdirname\fP [ option ... ]
+.fi
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtlaunchmany\fP and 
+\fBbtlaunchmanycurses\fP commands.
+.PP
+\fBbtlaunchmany\fP is a program that eases the use of 
+bittorrent in multiple-downloader situations.  The program checks
+a directory for torrent files.  When it finds any, it starts a 
+separate downloader thread for each file.
+.SH OPTIONS
+
+These programs have the exact same options as the normal 
+downloaders, which are documented in \fBbittorrent-downloader\fP(1).
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btmakemetafile (1),
+.BR bttrack (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/btcompletedir.1 b/net/py-bittornado/files/btcompletedir.1
new file mode 100644
index 000000000000..1e6afe007b7f
--- /dev/null
+++ b/net/py-bittornado/files/btcompletedir.1
@@ -0,0 +1,95 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTCOMPLETEDIR "1" "May 2004" "btcompletedir" "User Commands"
+.SH NAME
+btcompletedir \- manual page for btcompletedir 
+.SH SYNOPSIS
+.B btcompletedir
+\fI<trackerurl> <dir> \fR[\fIdir\fR...] [\fIparams\fR...]
+.SH DESCRIPTION
+makes a .torrent file for every file or directory present in each dir.
+.PP
+\fB\-\-announce_list\fR <arg>
+.IP
+a list of announce URLs - explained below (defaults to '')
+.PP
+\fB\-\-piece_size_pow2\fR <arg>
+.IP
+which power of 2 to set the piece size to (0 = automatic) (defaults
+to 0)
+.PP
+\fB\-\-comment\fR <arg>
+.IP
+optional human-readable comment to put in .torrent (defaults to '')
+.PP
+\fB\-\-target\fR <arg>
+.IP
+optional target file for the torrent (defaults to '')
+.IP
+announce_list = optional list of redundant/backup tracker URLs, in the format:
+.IP
+url[,url...][|url[,url...]...]
+.IP
+where URLs separated by commas are all tried first
+before the next group of URLs separated by the pipe is checked.
+If none is given, it is assumed you don't want one in the metafile.
+If announce_list is given, clients which support it
+will ignore the <announce> value.
+.IP
+Examples:
+.IP
+http://tracker1.com|http://tracker2.com|http://tracker3.com
+.IP
+(tries trackers 1-3 in order)
+.IP
+http://tracker1.com,http://tracker2.com,http://tracker3.com
+.IP
+(tries trackers 1-3 in a randomly selected order)
+.IP
+http://tracker1.com|http://backup1.com,http://backup2.com
+.IP
+(tries tracker 1 first, then tries between the 2 backups randomly)
+.PP
+makes a .torrent file for every file or directory present in each dir.
+.PP
+\fB\-\-announce_list\fR <arg>
+.IP
+a list of announce URLs - explained below (defaults to '')
+.PP
+\fB\-\-piece_size_pow2\fR <arg>
+.IP
+which power of 2 to set the piece size to (0 = automatic) (defaults
+to 0)
+.PP
+\fB\-\-comment\fR <arg>
+.IP
+optional human-readable comment to put in .torrent (defaults to '')
+.PP
+\fB\-\-target\fR <arg>
+.IP
+optional target file for the torrent (defaults to '')
+.IP
+announce_list = optional list of redundant/backup tracker URLs, in the format:
+.IP
+url[,url...][|url[,url...]...]
+.IP
+where URLs separated by commas are all tried first
+before the next group of URLs separated by the pipe is checked.
+If none is given, it is assumed you don't want one in the metafile.
+If announce_list is given, clients which support it
+will ignore the <announce> value.
+.IP
+Examples:
+.IP
+http://tracker1.com|http://tracker2.com|http://tracker3.com
+.IP
+(tries trackers 1-3 in order)
+.IP
+http://tracker1.com,http://tracker2.com,http://tracker3.com
+.IP
+(tries trackers 1-3 in a randomly selected order)
+.IP
+http://tracker1.com|http://backup1.com,http://backup2.com
+.IP
+(tries tracker 1 first, then tries between the 2 backups randomly)
+.SH "SEE ALSO"
+http://bittornado.org
diff --git a/net/py-bittornado/files/btcopyannounce.1 b/net/py-bittornado/files/btcopyannounce.1
new file mode 100644
index 000000000000..a5a66b79a1b1
--- /dev/null
+++ b/net/py-bittornado/files/btcopyannounce.1
@@ -0,0 +1,13 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTCOPYANNOUNCE "1" "May 2004" "btcopyannounce" "User Commands"
+.SH NAME
+Btcopyannounce \- manual page for btcopyannounce
+.SH SYNOPSIS
+.B btcopyannounce
+\fI<source.torrent> <file1.torrent> \fR[\fIfile2.torrent\fR...]
+.SH DESCRIPTION
+copies announce information from source to all specified torrents
+.PP
+copies announce information from source to all specified torrents
+.SH "SEE ALSO"
+http://bittornado.org
diff --git a/net/py-bittornado/files/btdownloadcurses.1 b/net/py-bittornado/files/btdownloadcurses.1
new file mode 100644
index 000000000000..9df6e66ccf0c
--- /dev/null
+++ b/net/py-bittornado/files/btdownloadcurses.1
@@ -0,0 +1,477 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTDOWNLOADCURSES "1" "August 2004" "btdownloadcurses (bittornado)" "User Commands"
+.SH NAME
+Btdownloadcurses \- curses bittornado download interface
+.SH SYNOPSIS
+.B btdownloadcurses
+\fI<global options>\fR
+.SH DESCRIPTION
+Arguments are:
+.PP
+\fB\-\-max_uploads\fR <arg>
+.IP
+the maximum number of uploads to allow at once. (defaults to 7)
+.PP
+\fB\-\-keepalive_interval\fR <arg>
+.IP
+number of seconds to pause between sending keepalives (defaults to 120.0)
+.PP
+\fB\-\-download_slice_size\fR <arg>
+.IP
+How many bytes to query for per request. (defaults to 16384)
+.PP
+\fB\-\-upload_unit_size\fR <arg>
+.IP
+when limiting upload rate, how many bytes to send at a time (defaults to 1460)
+.PP
+\fB\-\-request_backlog\fR <arg>
+.IP
+maximum number of requests to keep in a single pipe at once. (defaults to 10)
+.PP
+\fB\-\-max_message_length\fR <arg>
+.IP
+maximum length prefix encoding you'll accept over the wire - larger values get the
+connection dropped. (defaults to 8388608)
+.PP
+\fB\-\-ip\fR <arg>
+.IP
+ip to report you have to the tracker. (defaults to '')
+.PP
+\fB\-\-minport\fR <arg>
+.IP
+minimum port to listen on, counts up if unavailable (defaults to 10000)
+.PP
+\fB\-\-maxport\fR <arg>
+.IP
+maximum port to listen on (defaults to 60000)
+.PP
+\fB\-\-random_port\fR <arg>
+.IP
+whether to choose randomly inside the port range instead of counting up linearly
+(defaults to 1)
+.PP
+\fB\-\-responsefile\fR <arg>
+.IP
+file the server response was stored in, alternative to url (defaults to '')
+.PP
+\fB\-\-url\fR <arg>
+.IP
+url to get file from, alternative to responsefile (defaults to '')
+.PP
+\fB\-\-selector_enabled\fR <arg>
+.IP
+whether to enable the file selector and fast resume function (defaults to 1)
+.PP
+\fB\-\-expire_cache_data\fR <arg>
+.IP
+the number of days after which you wish to expire old cache data (0 = disabled) (defaults
+to 10)
+.PP
+\fB\-\-priority\fR <arg>
+.IP
+a list of file priorities separated by commas, must be one per file, 0 = highest, 1 =
+normal, 2 = lowest, \fB\-1\fR = download disabled (defaults to '')
+.PP
+\fB\-\-saveas\fR <arg>
+.IP
+local file name to save the file as, null indicates query user (defaults to '')
+.PP
+\fB\-\-timeout\fR <arg>
+.IP
+time to wait between closing sockets which nothing has been received on (defaults to
+300.0)
+.PP
+\fB\-\-timeout_check_interval\fR <arg>
+.IP
+time to wait between checking if any connections have timed out (defaults to 60.0)
+.PP
+\fB\-\-max_slice_length\fR <arg>
+.IP
+maximum length slice to send to peers, larger requests are ignored (defaults to 131072)
+.PP
+\fB\-\-max_rate_period\fR <arg>
+.IP
+maximum amount of time to guess the current rate estimate represents (defaults to 20.0)
+.PP
+\fB\-\-bind\fR <arg>
+.IP
+comma-separated list of ips/hostnames to bind to locally (defaults to '')
+.PP
+\fB\-\-ipv6_enabled\fR <arg>
+.IP
+allow the client to connect to peers via IPv6 (defaults to 0)
+.PP
+\fB\-\-ipv6_binds_v4\fR <arg>
+.IP
+set if an IPv6 server socket will also field IPv4 connections (defaults to 1)
+.PP
+\fB\-\-upnp_nat_access\fR <arg>
+.IP
+attempt to autoconfigure a UPnP router to forward a server port (0 = disabled, 1 = mode 1
+[fast], 2 = mode 2 [slow]) (defaults to 1)
+.PP
+\fB\-\-upload_rate_fudge\fR <arg>
+.IP
+time equivalent of writing to kernel-level TCP buffer, for rate adjustment (defaults to
+5.0)
+.PP
+\fB\-\-tcp_ack_fudge\fR <arg>
+.IP
+how much TCP ACK download overhead to add to upload rate calculations (0 = disabled)
+(defaults to 0.029999999999999999)
+.PP
+\fB\-\-display_interval\fR <arg>
+.IP
+time between updates of displayed information (defaults to 0.5)
+.PP
+\fB\-\-rerequest_interval\fR <arg>
+.IP
+time to wait between requesting more peers (defaults to 300)
+.PP
+\fB\-\-min_peers\fR <arg>
+.IP
+minimum number of peers to not do rerequesting (defaults to 20)
+.PP
+\fB\-\-http_timeout\fR <arg>
+.IP
+number of seconds to wait before assuming that an http connection has timed out (defaults
+to 60)
+.PP
+\fB\-\-max_initiate\fR <arg>
+.IP
+number of peers at which to stop initiating new connections (defaults to 40)
+.PP
+\fB\-\-check_hashes\fR <arg>
+.IP
+whether to check hashes on disk (defaults to 1)
+.PP
+\fB\-\-max_upload_rate\fR <arg>
+.IP
+maximum kB/s to upload at (0 = no limit, \fB\-1\fR = automatic) (defaults to 0)
+.PP
+\fB\-\-max_download_rate\fR <arg>
+.IP
+maximum kB/s to download at (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-alloc_type\fR <arg>
+.IP
+allocation type (may be normal, background, pre-allocate or sparse) (defaults to
+\&'normal')
+.PP
+\fB\-\-alloc_rate\fR <arg>
+.IP
+rate (in MiB/s) to allocate space at using background allocation (defaults to 2.0)
+.PP
+\fB\-\-buffer_reads\fR <arg>
+.IP
+whether to buffer disk reads (defaults to 1)
+.PP
+\fB\-\-write_buffer_size\fR <arg>
+.IP
+the maximum amount of space to use for buffering disk writes (in megabytes, 0 = disabled)
+(defaults to 4)
+.PP
+\fB\-\-snub_time\fR <arg>
+.IP
+seconds to wait for data to come in over a connection before assuming it's
+semi-permanently choked (defaults to 30.0)
+.PP
+\fB\-\-spew\fR <arg>
+.IP
+whether to display diagnostic info to stdout (defaults to 0)
+.PP
+\fB\-\-rarest_first_cutoff\fR <arg>
+.IP
+number of downloads at which to switch from random to rarest first (defaults to 2)
+.PP
+\fB\-\-rarest_first_priority_cutoff\fR <arg>
+.IP
+the number of peers which need to have a piece before other partials take priority over
+rarest first (defaults to 5)
+.PP
+\fB\-\-min_uploads\fR <arg>
+.IP
+the number of uploads to fill out to with extra optimistic unchokes (defaults to 4)
+.PP
+\fB\-\-max_files_open\fR <arg>
+.IP
+the maximum number of files to keep open at a time, 0 means no limit (defaults to 50)
+.PP
+\fB\-\-round_robin_period\fR <arg>
+.IP
+the number of seconds between the client's switching upload targets (defaults to 30)
+.PP
+\fB\-\-super_seeder\fR <arg>
+.IP
+whether to use special upload-efficiency-maximizing routines (only for dedicated seeds)
+(defaults to 0)
+.PP
+\fB\-\-security\fR <arg>
+.IP
+whether to enable extra security features intended to prevent abuse (defaults to 1)
+.PP
+\fB\-\-max_connections\fR <arg>
+.IP
+the absolute maximum number of peers to connect with (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-auto_kick\fR <arg>
+.IP
+whether to allow the client to automatically kick/ban peers that send bad data (defaults
+to 1)
+.PP
+\fB\-\-double_check\fR <arg>
+.IP
+whether to double-check data being written to the disk for errors (may increase CPU load)
+(defaults to 1)
+.PP
+\fB\-\-triple_check\fR <arg>
+.IP
+whether to thoroughly check data being written to the disk (may slow disk access)
+(defaults to 0)
+.PP
+\fB\-\-lock_files\fR <arg>
+.IP
+whether to lock files the client is working with (defaults to 1)
+.PP
+\fB\-\-lock_while_reading\fR <arg>
+.IP
+whether to lock access to files being read (defaults to 0)
+.PP
+\fB\-\-auto_flush\fR <arg>
+.IP
+minutes between automatic flushes to disk (0 = disabled) (defaults to 0)
+.PP
+Arguments are:
+.PP
+\fB\-\-max_uploads\fR <arg>
+.IP
+the maximum number of uploads to allow at once. (defaults to 7)
+.PP
+\fB\-\-keepalive_interval\fR <arg>
+.IP
+number of seconds to pause between sending keepalives (defaults to 120.0)
+.PP
+\fB\-\-download_slice_size\fR <arg>
+.IP
+How many bytes to query for per request. (defaults to 16384)
+.PP
+\fB\-\-upload_unit_size\fR <arg>
+.IP
+when limiting upload rate, how many bytes to send at a time (defaults to 1460)
+.PP
+\fB\-\-request_backlog\fR <arg>
+.IP
+maximum number of requests to keep in a single pipe at once. (defaults to 10)
+.PP
+\fB\-\-max_message_length\fR <arg>
+.IP
+maximum length prefix encoding you'll accept over the wire - larger values get the
+connection dropped. (defaults to 8388608)
+.PP
+\fB\-\-ip\fR <arg>
+.IP
+ip to report you have to the tracker. (defaults to '')
+.PP
+\fB\-\-minport\fR <arg>
+.IP
+minimum port to listen on, counts up if unavailable (defaults to 10000)
+.PP
+\fB\-\-maxport\fR <arg>
+.IP
+maximum port to listen on (defaults to 60000)
+.PP
+\fB\-\-random_port\fR <arg>
+.IP
+whether to choose randomly inside the port range instead of counting up linearly
+(defaults to 1)
+.PP
+\fB\-\-responsefile\fR <arg>
+.IP
+file the server response was stored in, alternative to url (defaults to '')
+.PP
+\fB\-\-url\fR <arg>
+.IP
+url to get file from, alternative to responsefile (defaults to '')
+.PP
+\fB\-\-selector_enabled\fR <arg>
+.IP
+whether to enable the file selector and fast resume function (defaults to 1)
+.PP
+\fB\-\-expire_cache_data\fR <arg>
+.IP
+the number of days after which you wish to expire old cache data (0 = disabled) (defaults
+to 10)
+.PP
+\fB\-\-priority\fR <arg>
+.IP
+a list of file priorities separated by commas, must be one per file, 0 = highest, 1 =
+normal, 2 = lowest, \fB\-1\fR = download disabled (defaults to '')
+.PP
+\fB\-\-saveas\fR <arg>
+.IP
+local file name to save the file as, null indicates query user (defaults to '')
+.PP
+\fB\-\-timeout\fR <arg>
+.IP
+time to wait between closing sockets which nothing has been received on (defaults to
+300.0)
+.PP
+\fB\-\-timeout_check_interval\fR <arg>
+.IP
+time to wait between checking if any connections have timed out (defaults to 60.0)
+.PP
+\fB\-\-max_slice_length\fR <arg>
+.IP
+maximum length slice to send to peers, larger requests are ignored (defaults to 131072)
+.PP
+\fB\-\-max_rate_period\fR <arg>
+.IP
+maximum amount of time to guess the current rate estimate represents (defaults to 20.0)
+.PP
+\fB\-\-bind\fR <arg>
+.IP
+comma-separated list of ips/hostnames to bind to locally (defaults to '')
+.PP
+\fB\-\-ipv6_enabled\fR <arg>
+.IP
+allow the client to connect to peers via IPv6 (defaults to 0)
+.PP
+\fB\-\-ipv6_binds_v4\fR <arg>
+.IP
+set if an IPv6 server socket will also field IPv4 connections (defaults to 1)
+.PP
+\fB\-\-upnp_nat_access\fR <arg>
+.IP
+attempt to autoconfigure a UPnP router to forward a server port (0 = disabled, 1 = mode 1
+[fast], 2 = mode 2 [slow]) (defaults to 1)
+.PP
+\fB\-\-upload_rate_fudge\fR <arg>
+.IP
+time equivalent of writing to kernel-level TCP buffer, for rate adjustment (defaults to
+5.0)
+.PP
+\fB\-\-tcp_ack_fudge\fR <arg>
+.IP
+how much TCP ACK download overhead to add to upload rate calculations (0 = disabled)
+(defaults to 0.029999999999999999)
+.PP
+\fB\-\-display_interval\fR <arg>
+.IP
+time between updates of displayed information (defaults to 0.5)
+.PP
+\fB\-\-rerequest_interval\fR <arg>
+.IP
+time to wait between requesting more peers (defaults to 300)
+.PP
+\fB\-\-min_peers\fR <arg>
+.IP
+minimum number of peers to not do rerequesting (defaults to 20)
+.PP
+\fB\-\-http_timeout\fR <arg>
+.IP
+number of seconds to wait before assuming that an http connection has timed out (defaults
+to 60)
+.PP
+\fB\-\-max_initiate\fR <arg>
+.IP
+number of peers at which to stop initiating new connections (defaults to 40)
+.PP
+\fB\-\-check_hashes\fR <arg>
+.IP
+whether to check hashes on disk (defaults to 1)
+.PP
+\fB\-\-max_upload_rate\fR <arg>
+.IP
+maximum kB/s to upload at (0 = no limit, \fB\-1\fR = automatic) (defaults to 0)
+.PP
+\fB\-\-max_download_rate\fR <arg>
+.IP
+maximum kB/s to download at (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-alloc_type\fR <arg>
+.IP
+allocation type (may be normal, background, pre-allocate or sparse) (defaults to
+\&'normal')
+.PP
+\fB\-\-alloc_rate\fR <arg>
+.IP
+rate (in MiB/s) to allocate space at using background allocation (defaults to 2.0)
+.PP
+\fB\-\-buffer_reads\fR <arg>
+.IP
+whether to buffer disk reads (defaults to 1)
+.PP
+\fB\-\-write_buffer_size\fR <arg>
+.IP
+the maximum amount of space to use for buffering disk writes (in megabytes, 0 = disabled)
+(defaults to 4)
+.PP
+\fB\-\-snub_time\fR <arg>
+.IP
+seconds to wait for data to come in over a connection before assuming it's
+semi-permanently choked (defaults to 30.0)
+.PP
+\fB\-\-spew\fR <arg>
+.IP
+whether to display diagnostic info to stdout (defaults to 0)
+.PP
+\fB\-\-rarest_first_cutoff\fR <arg>
+.IP
+number of downloads at which to switch from random to rarest first (defaults to 2)
+.PP
+\fB\-\-rarest_first_priority_cutoff\fR <arg>
+.IP
+the number of peers which need to have a piece before other partials take priority over
+rarest first (defaults to 5)
+.PP
+\fB\-\-min_uploads\fR <arg>
+.IP
+the number of uploads to fill out to with extra optimistic unchokes (defaults to 4)
+.PP
+\fB\-\-max_files_open\fR <arg>
+.IP
+the maximum number of files to keep open at a time, 0 means no limit (defaults to 50)
+.PP
+\fB\-\-round_robin_period\fR <arg>
+.IP
+the number of seconds between the client's switching upload targets (defaults to 30)
+.PP
+\fB\-\-super_seeder\fR <arg>
+.IP
+whether to use special upload-efficiency-maximizing routines (only for dedicated seeds)
+(defaults to 0)
+.PP
+\fB\-\-security\fR <arg>
+.IP
+whether to enable extra security features intended to prevent abuse (defaults to 1)
+.PP
+\fB\-\-max_connections\fR <arg>
+.IP
+the absolute maximum number of peers to connect with (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-auto_kick\fR <arg>
+.IP
+whether to allow the client to automatically kick/ban peers that send bad data (defaults
+to 1)
+.PP
+\fB\-\-double_check\fR <arg>
+.IP
+whether to double-check data being written to the disk for errors (may increase CPU load)
+(defaults to 1)
+.PP
+\fB\-\-triple_check\fR <arg>
+.IP
+whether to thoroughly check data being written to the disk (may slow disk access)
+(defaults to 0)
+.PP
+\fB\-\-lock_files\fR <arg>
+.IP
+whether to lock files the client is working with (defaults to 1)
+.PP
+\fB\-\-lock_while_reading\fR <arg>
+.IP
+whether to lock access to files being read (defaults to 0)
+.PP
+\fB\-\-auto_flush\fR <arg>
+.IP
+minutes between automatic flushes to disk (0 = disabled) (defaults to 0)
diff --git a/net/py-bittornado/files/btdownloadheadless.1 b/net/py-bittornado/files/btdownloadheadless.1
new file mode 100644
index 000000000000..ee6307be8ee3
--- /dev/null
+++ b/net/py-bittornado/files/btdownloadheadless.1
@@ -0,0 +1,268 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTDOWNLOADHEADLESS "1" "August 2004" "btdownloadheadless (bittornado)" "User Commands"
+.SH NAME
+btdownloadheadless \- headless bittornado download interface
+.SH DESCRIPTION
+Arguments are:
+.PP
+\fB\-\-max_uploads\fR <arg>
+.IP
+the maximum number of uploads to allow at once. (defaults to 7)
+.PP
+\fB\-\-keepalive_interval\fR <arg>
+.IP
+number of seconds to pause between sending keepalives (defaults to
+120.0)
+.PP
+\fB\-\-download_slice_size\fR <arg>
+.IP
+How many bytes to query for per request. (defaults to 16384)
+.PP
+\fB\-\-upload_unit_size\fR <arg>
+.IP
+when limiting upload rate, how many bytes to send at a time (defaults
+to 1460)
+.PP
+\fB\-\-request_backlog\fR <arg>
+.IP
+maximum number of requests to keep in a single pipe at once.
+(defaults to 10)
+.PP
+\fB\-\-max_message_length\fR <arg>
+.IP
+maximum length prefix encoding you'll accept over the wire - larger
+values get the connection dropped. (defaults to 8388608)
+.PP
+\fB\-\-ip\fR <arg>
+.IP
+ip to report you have to the tracker. (defaults to '')
+.PP
+\fB\-\-minport\fR <arg>
+.IP
+minimum port to listen on, counts up if unavailable (defaults to
+10000)
+.PP
+\fB\-\-maxport\fR <arg>
+.IP
+maximum port to listen on (defaults to 60000)
+.PP
+\fB\-\-random_port\fR <arg>
+.IP
+whether to choose randomly inside the port range instead of counting
+up linearly (defaults to 1)
+.PP
+\fB\-\-responsefile\fR <arg>
+.IP
+file the server response was stored in, alternative to url (defaults
+to '')
+.PP
+\fB\-\-url\fR <arg>
+.IP
+url to get file from, alternative to responsefile (defaults to '')
+.PP
+\fB\-\-selector_enabled\fR <arg>
+.IP
+whether to enable the file selector and fast resume function
+(defaults to 1)
+.PP
+\fB\-\-expire_cache_data\fR <arg>
+.IP
+the number of days after which you wish to expire old cache data (0 =
+disabled) (defaults to 10)
+.PP
+\fB\-\-priority\fR <arg>
+.IP
+a list of file priorities separated by commas, must be one per file,
+0 = highest, 1 = normal, 2 = lowest, \fB\-1\fR = download disabled (defaults
+to '')
+.PP
+\fB\-\-saveas\fR <arg>
+.IP
+local file name to save the file as, null indicates query user
+(defaults to '')
+.PP
+\fB\-\-timeout\fR <arg>
+.IP
+time to wait between closing sockets which nothing has been received
+on (defaults to 300.0)
+.PP
+\fB\-\-timeout_check_interval\fR <arg>
+.IP
+time to wait between checking if any connections have timed out
+(defaults to 60.0)
+.PP
+\fB\-\-max_slice_length\fR <arg>
+.IP
+maximum length slice to send to peers, larger requests are ignored
+(defaults to 131072)
+.PP
+\fB\-\-max_rate_period\fR <arg>
+.IP
+maximum amount of time to guess the current rate estimate represents
+(defaults to 20.0)
+.PP
+\fB\-\-bind\fR <arg>
+.IP
+comma-separated list of ips/hostnames to bind to locally (defaults to
+\&'')
+.PP
+\fB\-\-ipv6_enabled\fR <arg>
+.IP
+allow the client to connect to peers via IPv6 (defaults to 0)
+.PP
+\fB\-\-ipv6_binds_v4\fR <arg>
+.IP
+set if an IPv6 server socket will also field IPv4 connections
+(defaults to 1)
+.PP
+\fB\-\-upnp_nat_access\fR <arg>
+.IP
+attempt to autoconfigure a UPnP router to forward a server port (0 =
+disabled, 1 = mode 1 [fast], 2 = mode 2 [slow]) (defaults to 1)
+.PP
+\fB\-\-upload_rate_fudge\fR <arg>
+.IP
+time equivalent of writing to kernel-level TCP buffer, for rate
+adjustment (defaults to 5.0)
+.PP
+\fB\-\-tcp_ack_fudge\fR <arg>
+.IP
+how much TCP ACK download overhead to add to upload rate calculations
+(0 = disabled) (defaults to 0.029999999999999999)
+.PP
+\fB\-\-display_interval\fR <arg>
+.IP
+time between updates of displayed information (defaults to 0.5)
+.PP
+\fB\-\-rerequest_interval\fR <arg>
+.IP
+time to wait between requesting more peers (defaults to 300)
+.PP
+\fB\-\-min_peers\fR <arg>
+.IP
+minimum number of peers to not do rerequesting (defaults to 20)
+.PP
+\fB\-\-http_timeout\fR <arg>
+.IP
+number of seconds to wait before assuming that an http connection has
+timed out (defaults to 60)
+.PP
+\fB\-\-max_initiate\fR <arg>
+.IP
+number of peers at which to stop initiating new connections (defaults
+to 40)
+.PP
+\fB\-\-check_hashes\fR <arg>
+.IP
+whether to check hashes on disk (defaults to 1)
+.PP
+\fB\-\-max_upload_rate\fR <arg>
+.IP
+maximum kB/s to upload at (0 = no limit, \fB\-1\fR = automatic) (defaults to
+0)
+.PP
+\fB\-\-max_download_rate\fR <arg>
+.IP
+maximum kB/s to download at (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-alloc_type\fR <arg>
+.IP
+allocation type (may be normal, background, pre-allocate or sparse)
+(defaults to 'normal')
+.PP
+\fB\-\-alloc_rate\fR <arg>
+.IP
+rate (in MiB/s) to allocate space at using background allocation
+(defaults to 2.0)
+.PP
+\fB\-\-buffer_reads\fR <arg>
+.IP
+whether to buffer disk reads (defaults to 1)
+.PP
+\fB\-\-write_buffer_size\fR <arg>
+.IP
+the maximum amount of space to use for buffering disk writes (in
+megabytes, 0 = disabled) (defaults to 4)
+.PP
+\fB\-\-snub_time\fR <arg>
+.IP
+seconds to wait for data to come in over a connection before assuming
+it's semi-permanently choked (defaults to 30.0)
+.PP
+\fB\-\-spew\fR <arg>
+.IP
+whether to display diagnostic info to stdout (defaults to 0)
+.PP
+\fB\-\-rarest_first_cutoff\fR <arg>
+.IP
+number of downloads at which to switch from random to rarest first
+(defaults to 2)
+.PP
+\fB\-\-rarest_first_priority_cutoff\fR <arg>
+.IP
+the number of peers which need to have a piece before other partials
+take priority over rarest first (defaults to 5)
+.PP
+\fB\-\-min_uploads\fR <arg>
+.IP
+the number of uploads to fill out to with extra optimistic unchokes
+(defaults to 4)
+.PP
+\fB\-\-max_files_open\fR <arg>
+.IP
+the maximum number of files to keep open at a time, 0 means no limit
+(defaults to 50)
+.PP
+\fB\-\-round_robin_period\fR <arg>
+.IP
+the number of seconds between the client's switching upload targets
+(defaults to 30)
+.PP
+\fB\-\-super_seeder\fR <arg>
+.IP
+whether to use special upload-efficiency-maximizing routines (only
+for dedicated seeds) (defaults to 0)
+.PP
+\fB\-\-security\fR <arg>
+.IP
+whether to enable extra security features intended to prevent abuse
+(defaults to 1)
+.PP
+\fB\-\-max_connections\fR <arg>
+.IP
+the absolute maximum number of peers to connect with (0 = no limit)
+(defaults to 0)
+.PP
+\fB\-\-auto_kick\fR <arg>
+.IP
+whether to allow the client to automatically kick/ban peers that send
+bad data (defaults to 1)
+.PP
+\fB\-\-double_check\fR <arg>
+.IP
+whether to double-check data being written to the disk for errors
+(may increase CPU load) (defaults to 1)
+.PP
+\fB\-\-triple_check\fR <arg>
+.IP
+whether to thoroughly check data being written to the disk (may slow
+disk access) (defaults to 0)
+.PP
+\fB\-\-lock_files\fR <arg>
+.IP
+whether to lock files the client is working with (defaults to 1)
+.PP
+\fB\-\-lock_while_reading\fR <arg>
+.IP
+whether to lock access to files being read (defaults to 0)
+.PP
+\fB\-\-auto_flush\fR <arg>
+.IP
+minutes between automatic flushes to disk (0 = disabled) (defaults to
+0)
+.PP
+\fB\-\-save_options\fR <arg>
+.IP
+whether to save the current options as the new default configuration
+(only for btdownloadheadless.py) (defaults to 0)
+.PP
diff --git a/net/py-bittornado/files/btlaunchmany.1 b/net/py-bittornado/files/btlaunchmany.1
new file mode 100644
index 000000000000..0d508ca97e38
--- /dev/null
+++ b/net/py-bittornado/files/btlaunchmany.1
@@ -0,0 +1,288 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTLAUNCHMANY "1" "August 2004" "btlaunchmany (bttornado)" "User Commands"
+.SH NAME
+Btlaunchmany \- manual page for btlaunchmany
+.SH SYNOPSIS
+.B btlaunchmany
+\fI<directory> <global options>\fR
+.SH DESCRIPTION
+<directory> - directory to look for .torrent files (semi-recursive)
+Arguments are:
+.PP
+\fB\-\-max_uploads\fR <arg>
+.IP
+the maximum number of uploads to allow at once. (defaults to 7)
+.PP
+\fB\-\-keepalive_interval\fR <arg>
+.IP
+number of seconds to pause between sending keepalives (defaults to
+120.0)
+.PP
+\fB\-\-download_slice_size\fR <arg>
+.IP
+How many bytes to query for per request. (defaults to 16384)
+.PP
+\fB\-\-upload_unit_size\fR <arg>
+.IP
+when limiting upload rate, how many bytes to send at a time (defaults
+to 1460)
+.PP
+\fB\-\-request_backlog\fR <arg>
+.IP
+maximum number of requests to keep in a single pipe at once.
+(defaults to 10)
+.PP
+\fB\-\-max_message_length\fR <arg>
+.IP
+maximum length prefix encoding you'll accept over the wire - larger
+values get the connection dropped. (defaults to 8388608)
+.PP
+\fB\-\-ip\fR <arg>
+.IP
+ip to report you have to the tracker. (defaults to '')
+.PP
+\fB\-\-minport\fR <arg>
+.IP
+minimum port to listen on, counts up if unavailable (defaults to
+10000)
+.PP
+\fB\-\-maxport\fR <arg>
+.IP
+maximum port to listen on (defaults to 60000)
+.PP
+\fB\-\-random_port\fR <arg>
+.IP
+whether to choose randomly inside the port range instead of counting
+up linearly (defaults to 1)
+.PP
+\fB\-\-responsefile\fR <arg>
+.IP
+file the server response was stored in, alternative to url (defaults
+to '')
+.PP
+\fB\-\-url\fR <arg>
+.IP
+url to get file from, alternative to responsefile (defaults to '')
+.PP
+\fB\-\-selector_enabled\fR <arg>
+.IP
+whether to enable the file selector and fast resume function
+(defaults to 1)
+.PP
+\fB\-\-expire_cache_data\fR <arg>
+.IP
+the number of days after which you wish to expire old cache data (0 =
+disabled) (defaults to 10)
+.PP
+\fB\-\-priority\fR <arg>
+.IP
+a list of file priorities separated by commas, must be one per file,
+0 = highest, 1 = normal, 2 = lowest, \fB\-1\fR = download disabled (defaults
+to '')
+.PP
+\fB\-\-saveas\fR <arg>
+.IP
+local file name to save the file as, null indicates query user
+(defaults to '')
+.PP
+\fB\-\-timeout\fR <arg>
+.IP
+time to wait between closing sockets which nothing has been received
+on (defaults to 300.0)
+.PP
+\fB\-\-timeout_check_interval\fR <arg>
+.IP
+time to wait between checking if any connections have timed out
+(defaults to 60.0)
+.PP
+\fB\-\-max_slice_length\fR <arg>
+.IP
+maximum length slice to send to peers, larger requests are ignored
+(defaults to 131072)
+.PP
+\fB\-\-max_rate_period\fR <arg>
+.IP
+maximum amount of time to guess the current rate estimate represents
+(defaults to 20.0)
+.PP
+\fB\-\-bind\fR <arg>
+.IP
+comma-separated list of ips/hostnames to bind to locally (defaults to
+\&'')
+.PP
+\fB\-\-ipv6_enabled\fR <arg>
+.IP
+allow the client to connect to peers via IPv6 (defaults to 0)
+.PP
+\fB\-\-ipv6_binds_v4\fR <arg>
+.IP
+set if an IPv6 server socket will also field IPv4 connections
+(defaults to 1)
+.PP
+\fB\-\-upnp_nat_access\fR <arg>
+.IP
+attempt to autoconfigure a UPnP router to forward a server port (0 =
+disabled, 1 = mode 1 [fast], 2 = mode 2 [slow]) (defaults to 1)
+.PP
+\fB\-\-upload_rate_fudge\fR <arg>
+.IP
+time equivalent of writing to kernel-level TCP buffer, for rate
+adjustment (defaults to 5.0)
+.PP
+\fB\-\-tcp_ack_fudge\fR <arg>
+.IP
+how much TCP ACK download overhead to add to upload rate calculations
+(0 = disabled) (defaults to 0.029999999999999999)
+.PP
+\fB\-\-display_interval\fR <arg>
+.IP
+time between updates of displayed information (defaults to 0.5)
+.PP
+\fB\-\-rerequest_interval\fR <arg>
+.IP
+time to wait between requesting more peers (defaults to 300)
+.PP
+\fB\-\-min_peers\fR <arg>
+.IP
+minimum number of peers to not do rerequesting (defaults to 20)
+.PP
+\fB\-\-http_timeout\fR <arg>
+.IP
+number of seconds to wait before assuming that an http connection has
+timed out (defaults to 60)
+.PP
+\fB\-\-max_initiate\fR <arg>
+.IP
+number of peers at which to stop initiating new connections (defaults
+to 40)
+.PP
+\fB\-\-check_hashes\fR <arg>
+.IP
+whether to check hashes on disk (defaults to 1)
+.PP
+\fB\-\-max_upload_rate\fR <arg>
+.IP
+maximum kB/s to upload at (0 = no limit, \fB\-1\fR = automatic) (defaults to
+0)
+.PP
+\fB\-\-max_download_rate\fR <arg>
+.IP
+maximum kB/s to download at (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-alloc_type\fR <arg>
+.IP
+allocation type (may be normal, background, pre-allocate or sparse)
+(defaults to 'normal')
+.PP
+\fB\-\-alloc_rate\fR <arg>
+.IP
+rate (in MiB/s) to allocate space at using background allocation
+(defaults to 2.0)
+.PP
+\fB\-\-buffer_reads\fR <arg>
+.IP
+whether to buffer disk reads (defaults to 1)
+.PP
+\fB\-\-write_buffer_size\fR <arg>
+.IP
+the maximum amount of space to use for buffering disk writes (in
+megabytes, 0 = disabled) (defaults to 4)
+.PP
+\fB\-\-snub_time\fR <arg>
+.IP
+seconds to wait for data to come in over a connection before assuming
+it's semi-permanently choked (defaults to 30.0)
+.PP
+\fB\-\-spew\fR <arg>
+.IP
+whether to display diagnostic info to stdout (defaults to 0)
+.PP
+\fB\-\-rarest_first_cutoff\fR <arg>
+.IP
+number of downloads at which to switch from random to rarest first
+(defaults to 2)
+.PP
+\fB\-\-rarest_first_priority_cutoff\fR <arg>
+.IP
+the number of peers which need to have a piece before other partials
+take priority over rarest first (defaults to 5)
+.PP
+\fB\-\-min_uploads\fR <arg>
+.IP
+the number of uploads to fill out to with extra optimistic unchokes
+(defaults to 4)
+.PP
+\fB\-\-max_files_open\fR <arg>
+.IP
+the maximum number of files to keep open at a time, 0 means no limit
+(defaults to 50)
+.PP
+\fB\-\-round_robin_period\fR <arg>
+.IP
+the number of seconds between the client's switching upload targets
+(defaults to 30)
+.PP
+\fB\-\-super_seeder\fR <arg>
+.IP
+whether to use special upload-efficiency-maximizing routines (only
+for dedicated seeds) (defaults to 0)
+.PP
+\fB\-\-security\fR <arg>
+.IP
+whether to enable extra security features intended to prevent abuse
+(defaults to 1)
+.PP
+\fB\-\-max_connections\fR <arg>
+.IP
+the absolute maximum number of peers to connect with (0 = no limit)
+(defaults to 0)
+.PP
+\fB\-\-auto_kick\fR <arg>
+.IP
+whether to allow the client to automatically kick/ban peers that send
+bad data (defaults to 1)
+.PP
+\fB\-\-double_check\fR <arg>
+.IP
+whether to double-check data being written to the disk for errors
+(may increase CPU load) (defaults to 1)
+.PP
+\fB\-\-triple_check\fR <arg>
+.IP
+whether to thoroughly check data being written to the disk (may slow
+disk access) (defaults to 0)
+.PP
+\fB\-\-lock_files\fR <arg>
+.IP
+whether to lock files the client is working with (defaults to 1)
+.PP
+\fB\-\-lock_while_reading\fR <arg>
+.IP
+whether to lock access to files being read (defaults to 0)
+.PP
+\fB\-\-auto_flush\fR <arg>
+.IP
+minutes between automatic flushes to disk (0 = disabled) (defaults to
+0)
+.PP
+\fB\-\-parse_dir_interval\fR <arg>
+.IP
+how often to rescan the torrent directory, in seconds (defaults to
+60)
+.PP
+\fB\-\-saveas_style\fR <arg>
+.IP
+How to name torrent downloads (1 = rename to torrent name, 2 = save
+under name in torrent, 3 = save in directory under torrent name)
+(defaults to 1)
+.PP
+\fB\-\-display_path\fR <arg>
+.IP
+whether to display the full path or the torrent contents for each
+torrent (defaults to 1)
+.PP
+\fB\-\-save_options\fR <arg>
+.IP
+whether to save the current options as the new default configuration
+(only for btlaunchmany) (defaults to 0)
+.PP
diff --git a/net/py-bittornado/files/btlaunchmanycurses.1 b/net/py-bittornado/files/btlaunchmanycurses.1
new file mode 100644
index 000000000000..816ee85b9e5b
--- /dev/null
+++ b/net/py-bittornado/files/btlaunchmanycurses.1
@@ -0,0 +1,288 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTLAUNCHMANYCURSES "1" "August 2004" "btlaunchmanycurses (bittornado)" "User Commands"
+.SH NAME
+Btlaunchmanycurses: \- launch separate torrent download threads for each .torrent file in directory
+.SH SYNOPSIS
+.B btlaunchmanycurses
+\fI<directory> <global options>\fR
+.SH DESCRIPTION
+<directory> - directory to look for .torrent files (semi-recursive)
+Arguments are:
+.PP
+\fB\-\-max_uploads\fR <arg>
+.IP
+the maximum number of uploads to allow at once. (defaults to 7)
+.PP
+\fB\-\-keepalive_interval\fR <arg>
+.IP
+number of seconds to pause between sending keepalives (defaults to
+120.0)
+.PP
+\fB\-\-download_slice_size\fR <arg>
+.IP
+How many bytes to query for per request. (defaults to 16384)
+.PP
+\fB\-\-upload_unit_size\fR <arg>
+.IP
+when limiting upload rate, how many bytes to send at a time (defaults
+to 1460)
+.PP
+\fB\-\-request_backlog\fR <arg>
+.IP
+maximum number of requests to keep in a single pipe at once.
+(defaults to 10)
+.PP
+\fB\-\-max_message_length\fR <arg>
+.IP
+maximum length prefix encoding you'll accept over the wire - larger
+values get the connection dropped. (defaults to 8388608)
+.PP
+\fB\-\-ip\fR <arg>
+.IP
+ip to report you have to the tracker. (defaults to '')
+.PP
+\fB\-\-minport\fR <arg>
+.IP
+minimum port to listen on, counts up if unavailable (defaults to
+10000)
+.PP
+\fB\-\-maxport\fR <arg>
+.IP
+maximum port to listen on (defaults to 60000)
+.PP
+\fB\-\-random_port\fR <arg>
+.IP
+whether to choose randomly inside the port range instead of counting
+up linearly (defaults to 1)
+.PP
+\fB\-\-responsefile\fR <arg>
+.IP
+file the server response was stored in, alternative to url (defaults
+to '')
+.PP
+\fB\-\-url\fR <arg>
+.IP
+url to get file from, alternative to responsefile (defaults to '')
+.PP
+\fB\-\-selector_enabled\fR <arg>
+.IP
+whether to enable the file selector and fast resume function
+(defaults to 1)
+.PP
+\fB\-\-expire_cache_data\fR <arg>
+.IP
+the number of days after which you wish to expire old cache data (0 =
+disabled) (defaults to 10)
+.PP
+\fB\-\-priority\fR <arg>
+.IP
+a list of file priorities separated by commas, must be one per file,
+0 = highest, 1 = normal, 2 = lowest, \fB\-1\fR = download disabled (defaults
+to '')
+.PP
+\fB\-\-saveas\fR <arg>
+.IP
+local file name to save the file as, null indicates query user
+(defaults to '')
+.PP
+\fB\-\-timeout\fR <arg>
+.IP
+time to wait between closing sockets which nothing has been received
+on (defaults to 300.0)
+.PP
+\fB\-\-timeout_check_interval\fR <arg>
+.IP
+time to wait between checking if any connections have timed out
+(defaults to 60.0)
+.PP
+\fB\-\-max_slice_length\fR <arg>
+.IP
+maximum length slice to send to peers, larger requests are ignored
+(defaults to 131072)
+.PP
+\fB\-\-max_rate_period\fR <arg>
+.IP
+maximum amount of time to guess the current rate estimate represents
+(defaults to 20.0)
+.PP
+\fB\-\-bind\fR <arg>
+.IP
+comma-separated list of ips/hostnames to bind to locally (defaults to
+\&'')
+.PP
+\fB\-\-ipv6_enabled\fR <arg>
+.IP
+allow the client to connect to peers via IPv6 (defaults to 0)
+.PP
+\fB\-\-ipv6_binds_v4\fR <arg>
+.IP
+set if an IPv6 server socket will also field IPv4 connections
+(defaults to 1)
+.PP
+\fB\-\-upnp_nat_access\fR <arg>
+.IP
+attempt to autoconfigure a UPnP router to forward a server port (0 =
+disabled, 1 = mode 1 [fast], 2 = mode 2 [slow]) (defaults to 1)
+.PP
+\fB\-\-upload_rate_fudge\fR <arg>
+.IP
+time equivalent of writing to kernel-level TCP buffer, for rate
+adjustment (defaults to 5.0)
+.PP
+\fB\-\-tcp_ack_fudge\fR <arg>
+.IP
+how much TCP ACK download overhead to add to upload rate calculations
+(0 = disabled) (defaults to 0.029999999999999999)
+.PP
+\fB\-\-display_interval\fR <arg>
+.IP
+time between updates of displayed information (defaults to 0.5)
+.PP
+\fB\-\-rerequest_interval\fR <arg>
+.IP
+time to wait between requesting more peers (defaults to 300)
+.PP
+\fB\-\-min_peers\fR <arg>
+.IP
+minimum number of peers to not do rerequesting (defaults to 20)
+.PP
+\fB\-\-http_timeout\fR <arg>
+.IP
+number of seconds to wait before assuming that an http connection has
+timed out (defaults to 60)
+.PP
+\fB\-\-max_initiate\fR <arg>
+.IP
+number of peers at which to stop initiating new connections (defaults
+to 40)
+.PP
+\fB\-\-check_hashes\fR <arg>
+.IP
+whether to check hashes on disk (defaults to 1)
+.PP
+\fB\-\-max_upload_rate\fR <arg>
+.IP
+maximum kB/s to upload at (0 = no limit, \fB\-1\fR = automatic) (defaults to
+0)
+.PP
+\fB\-\-max_download_rate\fR <arg>
+.IP
+maximum kB/s to download at (0 = no limit) (defaults to 0)
+.PP
+\fB\-\-alloc_type\fR <arg>
+.IP
+allocation type (may be normal, background, pre-allocate or sparse)
+(defaults to 'normal')
+.PP
+\fB\-\-alloc_rate\fR <arg>
+.IP
+rate (in MiB/s) to allocate space at using background allocation
+(defaults to 2.0)
+.PP
+\fB\-\-buffer_reads\fR <arg>
+.IP
+whether to buffer disk reads (defaults to 1)
+.PP
+\fB\-\-write_buffer_size\fR <arg>
+.IP
+the maximum amount of space to use for buffering disk writes (in
+megabytes, 0 = disabled) (defaults to 4)
+.PP
+\fB\-\-snub_time\fR <arg>
+.IP
+seconds to wait for data to come in over a connection before assuming
+it's semi-permanently choked (defaults to 30.0)
+.PP
+\fB\-\-spew\fR <arg>
+.IP
+whether to display diagnostic info to stdout (defaults to 0)
+.PP
+\fB\-\-rarest_first_cutoff\fR <arg>
+.IP
+number of downloads at which to switch from random to rarest first
+(defaults to 2)
+.PP
+\fB\-\-rarest_first_priority_cutoff\fR <arg>
+.IP
+the number of peers which need to have a piece before other partials
+take priority over rarest first (defaults to 5)
+.PP
+\fB\-\-min_uploads\fR <arg>
+.IP
+the number of uploads to fill out to with extra optimistic unchokes
+(defaults to 4)
+.PP
+\fB\-\-max_files_open\fR <arg>
+.IP
+the maximum number of files to keep open at a time, 0 means no limit
+(defaults to 50)
+.PP
+\fB\-\-round_robin_period\fR <arg>
+.IP
+the number of seconds between the client's switching upload targets
+(defaults to 30)
+.PP
+\fB\-\-super_seeder\fR <arg>
+.IP
+whether to use special upload-efficiency-maximizing routines (only
+for dedicated seeds) (defaults to 0)
+.PP
+\fB\-\-security\fR <arg>
+.IP
+whether to enable extra security features intended to prevent abuse
+(defaults to 1)
+.PP
+\fB\-\-max_connections\fR <arg>
+.IP
+the absolute maximum number of peers to connect with (0 = no limit)
+(defaults to 0)
+.PP
+\fB\-\-auto_kick\fR <arg>
+.IP
+whether to allow the client to automatically kick/ban peers that send
+bad data (defaults to 1)
+.PP
+\fB\-\-double_check\fR <arg>
+.IP
+whether to double-check data being written to the disk for errors
+(may increase CPU load) (defaults to 1)
+.PP
+\fB\-\-triple_check\fR <arg>
+.IP
+whether to thoroughly check data being written to the disk (may slow
+disk access) (defaults to 0)
+.PP
+\fB\-\-lock_files\fR <arg>
+.IP
+whether to lock files the client is working with (defaults to 1)
+.PP
+\fB\-\-lock_while_reading\fR <arg>
+.IP
+whether to lock access to files being read (defaults to 0)
+.PP
+\fB\-\-auto_flush\fR <arg>
+.IP
+minutes between automatic flushes to disk (0 = disabled) (defaults to
+0)
+.PP
+\fB\-\-parse_dir_interval\fR <arg>
+.IP
+how often to rescan the torrent directory, in seconds (defaults to
+60)
+.PP
+\fB\-\-saveas_style\fR <arg>
+.IP
+How to name torrent downloads (1 = rename to torrent name, 2 = save
+under name in torrent, 3 = save in directory under torrent name)
+(defaults to 2)
+.PP
+\fB\-\-display_path\fR <arg>
+.IP
+whether to display the full path or the torrent contents for each
+torrent (defaults to 0)
+.PP
+\fB\-\-save_options\fR <arg>
+.IP
+whether to save the current options as the new default configuration
+(only for btlaunchmanycurses.py) (defaults to 0)
+.PP
diff --git a/net/py-bittornado/files/btmakemetafile.1 b/net/py-bittornado/files/btmakemetafile.1
new file mode 100644
index 000000000000..0b6c84412583
--- /dev/null
+++ b/net/py-bittornado/files/btmakemetafile.1
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH "BTMAKEMETAFILE" 1 "Jan 18 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+btmakemetafile \- program to generate torrent info files for bittorrent
+.SH SYNOPSIS
+.B btmakemetafile \fItracker_announce_address\fP \fIfile\fP [ option ... ] 
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtmakemetafile\fP
+command.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+\fBbtmakemetafile\fP is a program that generates the torrent info files
+which are distributed to bittorrent clients (usually via the WWW) in order
+to inform them where the designated tracker for the torrent is located, and 
+to allow them to verify the file's contents.
+.PP
+\fBbtmakemetafile\fP takes two arguments.  Both are required.  The first
+is the file that the torrent info file will be generated for.  The second is 
+the "announce" address of a tracker (ex. http://127.0.0.1:6969/announce).
+.SH OPTIONS
+.TP
+.B \-\-piece_size_pow2 \fIarg\fP
+which power of 2 to set the piece size to (default: 18)
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btrename (1),
+.BR btreannounce (1),
+.BR bttrack (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/btreannounce.1 b/net/py-bittornado/files/btreannounce.1
new file mode 100644
index 000000000000..5ebdab93b04c
--- /dev/null
+++ b/net/py-bittornado/files/btreannounce.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH "BTREANNOUNCE" 1 "Jan 18 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+btreannounce \- change the announce address of a torrent file.
+.SH SYNOPSIS
+\fBbttrack\fP \fIurl\fP \fIoldtorrent\fP \fInewtorrent\fP
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtreannounce\fP
+command.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+\fBbtreannounce\fP is a program which will change the announce 
+address of a existing torrent file.  The torrent specified by 
+the \fIoldtorrent\fP argument will be modified to use the new 
+announce url given by the \fIurl\fP argument, and the changed 
+file will be saved as \fInewtorrent\fP.
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btmakemetafile (1),
+.BR btrename (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/btrename.1 b/net/py-bittornado/files/btrename.1
new file mode 100644
index 000000000000..7c287da8efaf
--- /dev/null
+++ b/net/py-bittornado/files/btrename.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH "BTRENAME" 1 "Jan 18 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+btrename \- change the suggested filename inside a bittorrent file
+.SH SYNOPSIS
+\fBbttrack\fP \fItorrent\fP \fInewfilename\fP
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtrename\fP
+command.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+\fBbtrename\fP is a program which will change the suggested 
+filename presented to the user for a bittorrent file. This 
+will make the downloader save it as a different name by default.
+The torrent specified by the \fItorrent\fP option is modified 
+in-place, changing the suggested filename to \fInewfilename\fP.
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btmakemetafile (1),
+.BR btreannounce (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/btsethttpseeds.1 b/net/py-bittornado/files/btsethttpseeds.1
new file mode 100644
index 000000000000..6b3c8d2f04f9
--- /dev/null
+++ b/net/py-bittornado/files/btsethttpseeds.1
@@ -0,0 +1,26 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.33.
+.TH BTSETHTTPSEEDS "1" "May 2004" "btsethttpseeds" "User Commands"
+.SH NAME
+Btsethttpseeds \- manual page for btsethttpseeds
+.SH SYNOPSIS
+.B btsethttpseeds
+\fI<http-seeds> file1.torrent \fR[\fIfile2.torrent\fR...]
+.SH DESCRIPTION
+.IP
+Where:
+.IP
+http-seeds = list of seed URLs, in the format:
+.IP
+url[|url...] or 0
+.IP
+if the list is a zero, any http seeds will be stripped.
+.IP
+Where:
+.IP
+http-seeds = list of seed URLs, in the format:
+.IP
+url[|url...] or 0
+.IP
+if the list is a zero, any http seeds will be stripped.
+.SH "SEE ALSO"
+http://bittornado.org
diff --git a/net/py-bittornado/files/btshowmetainfo.1 b/net/py-bittornado/files/btshowmetainfo.1
new file mode 100644
index 000000000000..9f784a47f8a9
--- /dev/null
+++ b/net/py-bittornado/files/btshowmetainfo.1
@@ -0,0 +1,38 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH "BTSHOWMETAINFO" 1 "Jan 18 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+btshowmetainfo \- display information in bittorrent files
+.SH SYNOPSIS
+\fBbtshowmetainfo\fP \fIfile\fP [ file ... ] 
+.SH DESCRIPTION
+This manual page documents briefly the \fBbtshowmetainfo\fP
+command.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+\fBbtshowmetainfo\fP is a program which will display the information
+stored in a bittorrent file. 
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btmakemetafile (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/bttrack.1 b/net/py-bittornado/files/bttrack.1
new file mode 100644
index 000000000000..844fc01f4c80
--- /dev/null
+++ b/net/py-bittornado/files/bttrack.1
@@ -0,0 +1,86 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH "BTTRACK" 1 "Jan 18 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+bttrack \- tracker for bittorrent
+.SH SYNOPSIS
+.B bttrack \fI [ option ... ]
+.SH DESCRIPTION
+This manual page documents briefly the \fIbttrack\fP
+command.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics, 
+.\" respectively.
+\fBbttrack\fP is a program that serves as a "tracker" for 
+bittorrent clients.  This program keeps track of the completion
+of each client, and communcates that information when requested
+to other clients.
+.SH OPTIONS
+These programs follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of options is included below.
+.TP
+.B \-\-port \fIportnum\fP
+listen on port \fIportnum\fP (default 80)
+.TP
+.B \-\-dfile \fIfilename\fP
+store recent downloader info in \fIfilename\fP
+.TP
+.B \-\-bind \fIip\fP
+bind to \fIip\fP instead of the default
+.TP
+.B \-\-socket_timeout \fIsecs\fP
+timeout for closing connections (default 15)
+.TP
+.B \-\-save_dfile_interval \fIsecs\fP
+seconds between saving dfile (default 300)
+.TP
+.B \-\-timeout_downloaders_interval \fIsecs\fP
+seconds between expiring downloaders (default 2700)
+.TP
+.B \-\-reannounce_interval \fIsecs\fP
+seconds downloaders should wait between reannouncements (default 1800)
+.TP
+.B \-\-response_size \fInum\fP
+number of peers to send in an info message (default 50)
+.TP
+.B \-\-timeout_check_interval \fIsecs\fP
+time to wait between checking if any connections have timed out (default 5)
+.TP
+.B \-\-nat_check \fI[ 1 | 0 ]\fP
+whether to check back and ban downloaders behind NAT (default 1)
+.TP
+.B \-\-min_time_between_log_flushes \fIsecs\fP
+minimum time it must have been since the last flush to do another one (default 3.0)
+.TP
+.B \-\-allowed_dir \fIpath\fP
+only allow downloads for .torrents in this directory (default '')
+.TP
+.B \-\-parse_allowed_interval \fImins\fP
+minutes between reloading of allowed_dir (default 15)
+.TP
+.B \-\-show_names \fI[ 1 | 0 ]\fP
+whether to display names from alowed dir (default 1)
+
+.SH SEE ALSO
+.BR bittorrent-downloader (1),
+.BR btmakemetafile (1).
+.br
+.SH AUTHOR
+This manual page was written by Michael Janssen <jamuraa@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/net/py-bittornado/files/extra-patch-BitTornado_BT1_Rerequester.py b/net/py-bittornado/files/extra-patch-BitTornado_BT1_Rerequester.py
new file mode 100644
index 000000000000..5bb009b571ae
--- /dev/null
+++ b/net/py-bittornado/files/extra-patch-BitTornado_BT1_Rerequester.py
@@ -0,0 +1,30 @@
+
+$FreeBSD$
+
+--- BitTornado/BT1/Rerequester.py.orig	Tue Sep 14 19:32:11 2004
++++ BitTornado/BT1/Rerequester.py	Tue Sep 14 19:33:00 2004
+@@ -115,7 +115,7 @@
+             if self.howmany() >= self.maxpeers:
+                 s += '&numwant=0'
+             else:
+-                s += '&no_peer_id=1&compact=1'
++                s += '&no_peer_id=1'
+             self.last_failed = True         # force true, so will display an error
+             self.special = specialurl
+             self.rerequest(s, callback)
+@@ -132,7 +132,7 @@
+         if self.howmany() >= self.maxpeers:
+             s += '&numwant=0'
+         else:
+-            s += '&no_peer_id=1&compact=1'
++            s += '&no_peer_id=1'
+         if event != 3:
+             s += '&event=' + ['started', 'completed', 'stopped'][event]
+             
+@@ -384,4 +384,4 @@
+         self.lock.acquire()
+         x = self.finished
+         self.lock.release()
+-        return x    
+\ No newline at end of file
++        return x    
diff --git a/net/py-bittornado/pkg-plist b/net/py-bittornado/pkg-plist
index f5bb1dd29108..03fcd2e87b2a 100644
--- a/net/py-bittornado/pkg-plist
+++ b/net/py-bittornado/pkg-plist
@@ -182,6 +182,8 @@ share/BitTornado/yellow.ico
 %%PORTDOCS%%%%DOCSDIR%%/todo.txt
 %%PORTDOCS%%%%DOCSDIR%%/webseed-spec.txt
 %%PORTDOCS%%@dirrm %%DOCSDIR%%
+%%PORTDOCS%%%%EXAMPLESDIR%%/bittornado.sh.sample
+%%PORTDOCS%%@dirrm %%EXAMPLESDIR%%
 @dirrm %%PYTHON_SITELIBDIR%%/BitTornado/BT1
 @dirrm %%PYTHON_SITELIBDIR%%/BitTornado
 @dirrm share/BitTornado/