Use the provided script instead of the one provided by the port. The one

provided by the port infrastructure is outdated and doesn't support dhcpv6.

Noticed by:	lstewart@

2 files changed, 1 insertions, 515 deletions

diff --git a/net/isc-dhcp41-server/Makefile b/net/isc-dhcp41-server/Makefile
index 3c3d5538cae5..8bf2b6c54c44 100644
--- a/net/isc-dhcp41-server/Makefile
+++ b/net/isc-dhcp41-server/Makefile
@@ -20,7 +20,7 @@ MAINTAINER=	wxs@FreeBSD.org
 COMMENT?=	The ISC Dynamic Host Configuration Protocol server
 
 PATCHLEVEL=	P1
-PORTREVISION_SERVER=	3
+PORTREVISION_SERVER=	4
 PORTREVISION_CLIENT=	1
 PORTREVISION_RELAY=	1
 
@@ -130,9 +130,6 @@ SUB_LIST+=	PARANOIA=yes
 SUB_LIST+=	PARANOIA=no
 .endif
 
-post-extract:
-	@${CP} ${FILESDIR}/client::scripts::freebsd ${WRKSRC}/client/scripts/freebsd
-
 pre-patch:
 .if ${SUBSYS} == server && defined(WITH_DHCP_LDAP)
 	@cd ${WRKSRC} && ${PATCH} -p1 < ${WRKDIR}/${LDAPPATCHDIST}/${LDAPPATCHFILE}
@@ -143,7 +140,6 @@ post-patch:
 		${MSG_FILE} > ${PKGMESSAGE}
 	@${REINPLACE_CMD} ${REINPLACE_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} \
 		${WRKSRC}/client/dhclient.conf \
-		${WRKSRC}/client/scripts/freebsd
 
 do-install:
 	${MAKE} -C ${WRKSRC}/${SUBSYS} install
diff --git a/net/isc-dhcp41-server/files/client::scripts::freebsd b/net/isc-dhcp41-server/files/client::scripts::freebsd
deleted file mode 100644
index 9c4c3d3a6f24..000000000000
--- a/net/isc-dhcp41-server/files/client::scripts::freebsd
+++ /dev/null
@@ -1,510 +0,0 @@
-#!/bin/sh
-
-#############################################################################
-#
-# Copyright (c) 1999, MindStep Corporation
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#
-#############################################################################
-#
-# This script was written by Patrick Bihan-Faou, patrick@mindstep.com,
-# Please contact us for bug reports, etc.
-#
-#############################################################################
-# $MindStep_Id: dhclient-script.sh,v 1.8 1999/12/07 22:11:08 patrick Exp $
-# $MindStep_Tag: CONTRIB_19991207 $
-# from FreeBSD: src/sbin/dhclient/dhclient-script.sh,v 1.2 2002/02/01 18:46:58 alfred Exp
-# $FreeBSD$
-#############################################################################
-
-
-#############################################################################
-# hook functions prototypes
-#
-# The "pre_state_XXX_hook" functions are called before the main
-# work is done for the state XXX
-#
-# The "post_state_XXX_hook" functions are called after the main
-# work is done for the state XXX
-#
-# These functions are meant to be overridden by the user's
-# dhclient-enter-hooks file
-#############################################################################
-
-pre_state_MEDIUM_hook () { }
-pre_state_PREINIT_hook () { }
-pre_state_ARPCHECK_hook () { }
-pre_state_ARPSEND_hook () { }
-pre_state_RENEW_hook () { }
-pre_state_REBIND_hook () { }
-pre_state_BOUND_hook () { }
-pre_state_REBOOT_hook () { }
-pre_state_EXPIRE_hook () { }
-pre_state_FAIL_hook () { }
-pre_state_TIMEOUT_hook () { }
-post_state_MEDIUM_hook () { }
-post_state_PREINIT_hook () { }
-post_state_ARPCHECK_hook () { }
-post_state_ARPSEND_hook () { }
-post_state_RENEW_hook () { }
-post_state_REBIND_hook () { }
-post_state_BOUND_hook () { }
-post_state_REBOOT_hook () { }
-post_state_EXPIRE_hook () { }
-post_state_FAIL_hook () { }
-post_state_TIMEOUT_hook () { }
-
-#############################################################################
-# make_resolv_conf
-#
-# This function is called to update the information related to the
-# DNS configuration (the resolver part)
-#############################################################################
-make_resolv_conf () 
-{
-   if [ "x$new_domain_name" != x ] && [ "x$new_domain_name_servers" != x ]; then
-     echo search $new_domain_name >/etc/resolv.conf
-     for nameserver in $new_domain_name_servers; do
-       echo nameserver $nameserver >>/etc/resolv.conf
-     done
-   fi
-}
-
-#############################################################################
-# set_XXX
-# unset_XXX
-#
-# These function each deal with one particular setting.
-# They are OS dependent and may be overridden in the 
-# dhclient-enter-hooks file if needed.
-#
-# These functions are called with either "new" or "old" to indicate which
-# set of variables to use (new_ip_address or old_ip_address...)
-#
-#############################################################################
-
-update_hostname ()
-{
-	local current_hostname=`/bin/hostname`
-
-  	if	[ "$current_hostname" = "" ] || \
-		[ "$current_hostname" = "$old_host_name" ]
-	then
-		if [ "$new_host_name" != "$old_host_name" ]
-		then
-			$LOGGER "New Hostname: $new_host_name"
-			hostname $new_host_name
-		fi
-	fi
-}
-
-set_ip_address () 
-{
-	local ip
-	local mask
-	local bcast
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval ip="\$${1}_ip_address"
-	eval mask="\$${1}_subnet_mask"
-	eval bcast="\$${1}_broadcast_address"
-
-	if [ "$ip" != "" ]
-	then
-		ifconfig $interface inet $ip netmask $mask broadcast $bcast $medium
-#		route add $ip 127.0.0.1 > /dev/null 2>&1
-	fi
-}
-
-unset_ip_address () 
-{
-	local ip
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval ip="\$${1}_ip_address"
-
-	if [ "$ip" != "" ]
-	then
-		ifconfig $interface inet -alias $ip $medium
-#		route delete $ip 127.0.0.1 > /dev/null 2>&1
-	fi
-}
-
-set_ip_alias () 
-{
-	if [ "$alias_ip_address" != "" ]
-	then
-		ifconfig $interface inet alias $alias_ip_address netmask $alias_subnet_mask
-#		route add $alias_ip_address 127.0.0.1
-	fi
-}
-
-unset_ip_alias () 
-{
-	if [ "$alias_ip_address" != "" ]
-	then
-		ifconfig $interface inet -alias $alias_ip_address > /dev/null 2>&1
-#		route delete $alias_ip_address 127.0.0.1 > /dev/null 2>&1
-	fi
-}
-
-set_routers () 
-{
-	local router_list
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval router_list="\$${1}_routers"
-
-	for router in $router_list
-	do
-		route add default $router >/dev/null 2>&1
-	done
-}
-
-unset_routers () 
-{
-	local router_list
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval router_list="\$${1}_routers"
-
-	for router in $router_list
-	do
-		route delete default $router >/dev/null 2>&1
-	done
-}
-
-set_static_routes () 
-{
-	local static_routes
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval static_routes="\$${1}_static_routes"
-
-	set static_routes
-
-	while [ $# -ge 2 ]
-	do
-		$LOGGER "New Static Route: $1 -> $2"
-		route add $1 $2
-		shift; shift
-	done
-}
-
-unset_static_routes () 
-{
-	local static_routes
-
-	if [ $# -lt 1 ]
-	then
-		return  1
-	fi
-
-	eval static_routes="\$${1}_static_routes"
-
-	set static_routes
-
-	while [ $# -ge 2 ]
-	do
-		route delete $1 $2
-		shift; shift
-	done
-}
-
-#############################################################################
-#
-# utility functions grouping what needs to be done in logical units.
-#
-#############################################################################
-
-set_all ()
-{
-	set_ip_address new
-	set_routers new
-	set_static_routes new
-
-	if	[ "$new_ip_address" != "$alias_ip_address" ]
-	then
-		set_ip_alias
-	fi
-}
-
-set_others ()
-{
-	update_hostname
-	make_resolv_conf
-}
-
-clear_arp_table () 
-{
-	arp -d -a
-}
-
-unset_all ()
-{
-	if [ "$alias_ip_address" != "$old_ip_address" ]
-	then
-		unset_ip_alias
-	fi
-
-	if [ "$old_ip_address" != "" ] 
-	then
-		unset_ip_address old
-		unset_routers old
-		unset_static_routes old
-		clear_arp_table
-	fi
-}
-
-test_new_lease () 
-{
-	local rc
-
-	set $new_routers
-
-	if [ $# -ge 1 ]
-	then
-		set_ip_address new
-		if ping -q -c 1 $1
-		then
-			rc=0
-		else
-			rc=1
-		fi
-		unset_ip_address new
-	else
-		rc=1
-	fi
-	return  $rc
-}
-
-#############################################################################
-# Main State functions.
-#
-# There is a state function for each state of the DHCP client
-# These functions are OS specific and should be be tampered with.
-#############################################################################
-
-in_state_MEDIUM () 
-{
-  ifconfig $interface $medium
-  ifconfig $interface inet -alias 0.0.0.0 $medium >/dev/null 2>&1
-  sleep 1
-  exit_status=0
-}
-
-in_state_PREINIT () 
-{
-	unset_ip_alias
-
-	ifconfig $interface inet 0.0.0.0 netmask 0.0.0.0 \
-			broadcast 255.255.255.255 up
-	exit_status=0
-}
-
-in_state_ARPCHECK () 
-{
-  exit_status=0
-}
-
-in_state_ARPSEND () 
-{
-  exit_status=0
-}
-
-in_state_RENEW () 
-{
-	if [ "$old_ip_address" != "$new_ip_address" ]
-	then
-		unset_all
-		set_all
-	fi
-
-	set_others
-}
-
-in_state_REBIND () {
-	in_state_RENEW
-}
-
-in_state_BOUND () {
-	unset_all
-	set_all
-	set_others
-}
-
-in_state_REBOOT () {
-	in_state_BOUND
-}
-
-in_state_EXPIRE () 
-{
-	unset_all
-	set_ip_alias
-	exit_status=0
-}
-
-in_state_FAIL () {
-	in_state_EXPIRE
-}
-
-in_state_TIMEOUT () 
-{
-	unset_all
-
-	if test_new_lease
-	then
-		set_all
-		set_others
-	else
-	 	$LOGGER "No good lease information in TIMEOUT state"	
-		set_ip_alias
-		exit_status=1
-	fi
-}
-
-#############################################################################
-# Main functions:
-#
-# dhclient_script_init() parses the optional "enter_hooks" script which can
-#   override any of the state functions
-#
-# This function also parses the variables and notifies the detected changes.
-#############################################################################
-dhclient_script_init ()
-{
-	if [ "$new_network_number" != "" ]
-	then
-		$LOGGER "New Network Number: $new_network_number"
-	fi
-
-	if [ "$new_ip_address" != "" ]
-	then
-		$LOGGER "New IP Address: $new_ip_address"
-	fi
-
-	if [ "$new_broadcast_address" != "" ]
-	then
-		$LOGGER "New Broadcast Address: $new_broadcast_address"
-	fi
-
-	if [ "$new_subnet_mask" != "" ]
-	then
-		$LOGGER "New Subnet Mask for $interface: $new_subnet_mask"
-	fi
-
-	if [ "$alias_subnet_mask" != "" ]
-	then
-	fi
-}
-
-#############################################################################
-# dhclient_main() does the appropriate work depending on the state of
-# the dhcp client
-#############################################################################
-dhclient_script_main ()
-{
-#	set -x
-	exit_status=0
-
-	case $reason in
-		MEDIUM|\
-		PREINIT|\
-		ARPCHECK|\
-		ARPSEND|\
-		RENEW|\
-		REBIND|\
-		BOUND|\
-		REBOOT|\
-		EXPIRE|\
-		FAIL|\
-		TIMEOUT)
-			pre_state_${reason}_hook
-			in_state_${reason}
-			post_state_${reason}_hook
-			;;
-		*)
-			$LOGGER "dhclient-script called with invalid reason $reason"
-			exit_status=1
-			;;
-	esac
-}
-
-#############################################################################
-# Let's do the work...
-#############################################################################
-
-if [ -x /usr/bin/logger ]; then
-	LOGGER="/usr/bin/logger -s -p user.notice -t dhclient"
-else
-	LOGGER=echo
-fi
-
-# Invoke the local dhcp client enter hooks, if they exist.
-if [ -x %%PREFIX%%/etc/dhclient-enter-hooks ]
-then
-	exit_status=0
-	. %%PREFIX%%/etc/dhclient-enter-hooks
-	# allow the local script to abort processing of this state
-	# local script must set exit_status variable to nonzero.
-	if [ $exit_status -ne 0 ]
-	then
-		exit $exit_status
-	fi
-fi
-
-dhclient_script_init
-dhclient_script_main
-
-# Invokes the local dhcp client exit hooks, if any.
-if [ -x %%PREFIX%%/etc/dhclient-exit-hooks ]; then
-	. %%PREFIX%%/etc/dhclient-exit-hooks
-fi
-
-exit $exit_status
-
-#############################################################################
-# That's all folks
-#############################################################################