Remove net/zebra-devel port.

It the same as net/zebra for a long time.

PR:		ports/66831
Submitted by:	glebius

6 files changed, 0 insertions, 259 deletions

diff --git a/net/zebra-devel/Makefile b/net/zebra-devel/Makefile
deleted file mode 100644
index 92c581d2dc85..000000000000
--- a/net/zebra-devel/Makefile
+++ /dev/null
@@ -1,106 +0,0 @@
-# New ports collection makefile for:	zebra-devel
-# Date created:		Fri  20 Jun 2003 15:57:48 EEST
-# Whom:			Alexandr Kovalenko <never@nevermind.kiev.ua>
-#
-# $FreeBSD$
-#
-
-PORTNAME=	zebra
-PORTVERSION=	0.94
-PORTREVISION?=	2
-CATEGORIES=	net ipv6
-MASTER_SITES=	ftp://ftp.zebra.org/pub/zebra/ \
-		ftp://ftp.ripe.net/mirrors/sites/ftp.zebra.org/pub/zebra/
-
-MAINTAINER=	never@nevermind.kiev.ua
-COMMENT=	Free RIPv1, RIPv2, OSPFv2, BGP4 route software (server/reflector)
-
-LATEST_LINK=	${PORTNAME}-devel
-
-WRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}
-
-USE_SUBMAKE=	yes
-GNU_CONFIGURE=	yes
-CONFIGURE_ARGS+=--sysconfdir=${PREFIX}/etc/zebra
-SCRIPTS_ENV=	WRKDIRPREFIX=${WRKDIRPREFIX}
-
-MAN1=		vtysh.1
-MAN8=		bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8
-INFO=		zebra
-
-.if defined (WITHOUT_IPV6)
-CONFIGURE_ARGS+=--disable-ipv6
-WITHOUT_OSPF6D=	yes
-WITHOUT_RIPNGD=	yes
-.endif
-
-.if !defined(WITHOUT_BGPD)
-PLIST_SUB+=	BGPD=""
-.else
-CONFIGURE_ARGS+=--disable-bgpd
-PLIST_SUB+=	BGPD="@comment "
-.endif
-
-.if !defined(WITHOUT_OSPF6D)
-PLIST_SUB+=	OSPF6D=""
-.else
-CONFIGURE_ARGS+=--disable-ospf6d
-PLIST_SUB+=	OSPF6D="@comment "
-.endif
-
-.if !defined(WITHOUT_OSPFD)
-PLIST_SUB+=	OSPF6D=""
-PLIST_SUB+=	OSPFD=""
-.else
-CONFIGURE_ARGS+=--disable-ospfd
-PLIST_SUB+=	OSPFD="@comment "
-.endif
-
-.if !defined(WITHOUT_RIPD)
-PLIST_SUB+=	RIPD=""
-.else
-CONFIGURE_ARGS+=--disable-ripd
-PLIST_SUB+=	RIPD="@comment "
-.endif
-
-.if !defined(WITHOUT_RIPNGD)
-PLIST_SUB+=	RIPNGD=""
-.else
-CONFIGURE_ARGS+=--disable-ripngd
-PLIST_SUB+=	RIPNGD="@comment "
-.endif
-
-.if !defined(WITHOUT_VTYSH)
-PLIST_SUB+=	VTYSH=""
-CONFIGURE_ARGS+=--enable-vtysh
-.else
-PLIST_SUB+=	VTYSH="@comment "
-.endif
-
-.if !defined(BATCH)
-pre-configure:
-	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
-
-post-clean:
-	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
-
-.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
-.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
-.endif
-.endif
-
-post-install:
-	@( cd ${WRKSRC}/doc; ${RM} -f zebra*info*; ${MAKE} zebra.info install )
-	@${ECHO} "===>     installing zebra startup file..."
-	@${SED} -e "s=!!PREFIX!!=${PREFIX}=" \
-		< ${FILESDIR}/zebractl.sh  \
-		> ${PREFIX}/sbin/zebractl
-	@${CHMOD} 555 ${PREFIX}/sbin/zebractl
-	@${ECHO} "Make these entries in /etc/rc.conf to start zebra:"
-	@${ECHO} "defaultrouter=\"NO\""
-	@${ECHO} "router_enable=\"YES\""
-	@${ECHO} "router=\"${PREFIX}/sbin/zebractl\""
-	@${ECHO} "router_flags=\"start\""
-	@${ECHO} "done."
-
-.include <bsd.port.mk>
diff --git a/net/zebra-devel/distinfo b/net/zebra-devel/distinfo
deleted file mode 100644
index ca6e66ac0464..000000000000
--- a/net/zebra-devel/distinfo
+++ /dev/null
@@ -1,2 +0,0 @@
-MD5 (zebra-0.94.tar.gz) = ff1633f1ac026b720fa37b1856be3f48
-SIZE (zebra-0.94.tar.gz) = 1319836
diff --git a/net/zebra-devel/files/zebractl.sh b/net/zebra-devel/files/zebractl.sh
deleted file mode 100644
index f29f4c69c88e..000000000000
--- a/net/zebra-devel/files/zebractl.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#! /bin/sh
-#
-# $FreeBSD: /tmp/pcvs/ports/net/zebra-devel/files/Attic/zebractl.sh,v 1.9 2003-07-02 19:47:28 osa Exp $
-#
-# zebra start/stop script by "Andreas Klemm <andreas@FreeBSD.ORG>"
-#
-
-usage()
-{
-	echo "$0: usage: $0 [ start | stop | restart ]"
-	exit 1
-}
-
-if [ $# -lt 1 ]; then
-	echo "$0: error: one argument needed"; usage
-elif [ $# -gt 1 ]; then
-	echo "$0: error: only one argument needed"; usage
-fi
-
-case $1 in
-	start)
-		if [ ! -f !!PREFIX!!/etc/zebra/zebra.conf ]; then
-			echo "error: zebra.conf config file is mandatory"
-			exit 1
-		fi
-		[ -f !!PREFIX!!/etc/zebra/zebra.conf ] \
-			&& !!PREFIX!!/sbin/zebra -d && echo -n ' zebra'
-		[ -f !!PREFIX!!/etc/zebra/ripd.conf ] \
-			&& !!PREFIX!!/sbin/ripd -d && echo -n ' ripd'
-		[ -f !!PREFIX!!/etc/zebra/ripngd.conf ] \
-			&& !!PREFIX!!/sbin/ripngd -d && echo -n ' ripngd'
-		[ -f !!PREFIX!!/etc/zebra/ospfd.conf ] \
-			&& !!PREFIX!!/sbin/ospfd -d && echo -n ' ospfd'
-		[ -f !!PREFIX!!/etc/zebra/ospf6d.conf ] \
-			&& !!PREFIX!!/sbin/ospf6d -d && echo -n ' ospf6d'
-		[ -f !!PREFIX!!/etc/zebra/bgpd.conf ] \
-			&& !!PREFIX!!/sbin/bgpd -d && echo -n ' bgpd'
-		;;
-
-	stop)
-		[ -f !!PREFIX!!/etc/zebra/ripd.conf ] && killall ripd
-		[ -f !!PREFIX!!/etc/zebra/ripngd.conf ] && killall ripngd
-		[ -f !!PREFIX!!/etc/zebra/ospfd.conf ] && killall ospfd
-		[ -f !!PREFIX!!/etc/zebra/ospf6d.conf ] && killall ospf6d
-		[ -f !!PREFIX!!/etc/zebra/bgpd.conf ] && killall bgpd
-		[ -f !!PREFIX!!/etc/zebra/zebra.conf ] &&  killall zebra
-		;;
-	restart)
-		$0 stop
-		$0 start
-		;;
-
-	*)	echo "$0: error: unknown option $1"
-		usage
-		;;
-esac
-exit 0
diff --git a/net/zebra-devel/pkg-descr b/net/zebra-devel/pkg-descr
deleted file mode 100644
index 005d35bc4f1b..000000000000
--- a/net/zebra-devel/pkg-descr
+++ /dev/null
@@ -1,15 +0,0 @@
-GNU Zebra is a free software (distributed under GNU Generic Public
-License) which manages TCP/IP based routing protocols.
-
-It supports BGP-4 protocol as described in RFC1771 (A Border Gateway
-Protocol 4) and RIPv1, RIPv2 and OSPFv2.
-
-Zebra uses multithread technology under multithread supported UNIX
-kernels.  However it can be run under not-multithread supported
-UNIX kernels.
-
-Zebra is intended to be used as a Route Server and a Route Reflector.
-Zebra is not a toolkit, it provides full routing power under a new
-architecture.
-
-WWW: http://www.zebra.org/
diff --git a/net/zebra-devel/pkg-plist b/net/zebra-devel/pkg-plist
deleted file mode 100644
index 4deae73b4859..000000000000
--- a/net/zebra-devel/pkg-plist
+++ /dev/null
@@ -1,17 +0,0 @@
-%%BGPD%%sbin/bgpd
-%%OSPF6D%%sbin/ospf6d
-%%OSPFD%%sbin/ospfd
-%%RIPD%%sbin/ripd
-%%RIPNGD%%sbin/ripngd
-sbin/zebra
-sbin/zebractl
-%%VTYSH%%bin/vtysh
-%%BGPD%%etc/zebra/bgpd.conf.sample
-%%BGPD%%etc/zebra/bgpd.conf.sample2
-%%OSPF6D%%etc/zebra/ospf6d.conf.sample
-%%OSPFD%%etc/zebra/ospfd.conf.sample
-%%RIPD%%etc/zebra/ripd.conf.sample
-%%RIPNGD%%etc/zebra/ripngd.conf.sample
-%%VTYSH%%etc/zebra/vtysh.conf.sample
-etc/zebra/zebra.conf.sample
-@dirrm etc/zebra
diff --git a/net/zebra-devel/scripts/configure b/net/zebra-devel/scripts/configure
deleted file mode 100644
index 9a5c8a9926f4..000000000000
--- a/net/zebra-devel/scripts/configure
+++ /dev/null
@@ -1,62 +0,0 @@
-#! /bin/sh
-
-# $FreeBSD$
-
-# configure - zebra compile time option configurator
-# by Andreas Klemm <andreas@FreeBSD.org>
-
-if [ "$BATCH" != "yes" -a "$BATCH" != "YES" ]; then
-
-#
-# configure - zebra compile time options
-#
-
-/usr/bin/dialog --title "Zebra Compile Time Options" --clear \
-	--checklist "\n\
-Select compile time options for zebra port:" -1 -1 8	\
-LIBPAM		"enable PAM authentication for vtysh"	OFF \
-OSPF_NSSA	"turn on undergoing NSSA feature"	OFF \
-SNMP		"enable SNMP support"			OFF \
-TCP-ZEBRA	"enable TCP/IP socket connection"	OFF \
-2> /tmp/zebra-checklist.$$
-
-retval=$?
-
-if [ -s /tmp/zebra-checklist.$$ ]; then
-	set `cat /tmp/zebra-checklist.$$`
-fi
-rm -f /tmp/zebra-checklist.$$
-
-case $retval in
-	0)	if [ -z "$*" ]; then
-			echo "Nothing selected"
-		fi
-		;;
-	1)	echo "Cancel pressed."
-		exit 1
-		;;
-esac
-
-/bin/mkdir -p ${WRKDIRPREFIX}${CURDIR}
-exec > ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-
-while [ "$1" ]; do
-    case $1 in
-	\"LIBPAM\")
-		echo CONFIGURE_ARGS+=--with-libpam
-		;;
-	\"OSPF_NSSA\")
-		echo CONFIGURE_ARGS+=--enable-nssa
-		;;
-	\"SNMP\")
-		echo CONFIGURE_ARGS+=--enable-snmp
-		echo 'LIB_DEPENDS+=snmp.4:${PORTSDIR}/net-mgmt/net-snmp4:install'
-		;;
-	\"TCP-ZEBRA\")
-		echo CONFIGURE_ARGS+=--enable-tcp-zebra
-		;;
-    esac
-    shift
-done
-
-fi # if $BATCH