Update port to 4.5.5

PR:		17516
Submitted by:	Maintainer

5 files changed, 68 insertions, 60 deletions

diff --git a/net/etherboot/Makefile b/net/etherboot/Makefile
index e9e09356faff..55db0423e4ef 100644
--- a/net/etherboot/Makefile
+++ b/net/etherboot/Makefile
@@ -6,8 +6,8 @@
 # $FreeBSD$
 #
 
-DISTNAME=	etherboot-4.2.11
-PKGNAME=	etherboot-4.2
+DISTNAME=	etherboot-4.5.5
+PKGNAME=	etherboot-4.5
 CATEGORIES=	net
 MASTER_SITES=	http://www.slug.org.au/etherboot/ \
 		http://www.us.kernel.org/pub/linux/devel/gcc/ \
@@ -20,7 +20,7 @@ BUILD_DEPENDS=	nasm:${PORTSDIR}/devel/nasm
 
 NO_PACKAGE=	lots of configuration necessary
 USE_GMAKE=1
-WRKSRC=		${WRKDIR}/${PKGNAME}/src-32
+WRKSRC=		${WRKDIR}/${DISTNAME}/src
 BINUTILS_VER=   binutils-2.9.1.0.25  # need newer version of gas for data32
 
 pre-configure:
diff --git a/net/etherboot/distinfo b/net/etherboot/distinfo
index e105ad1170bd..35521126a047 100644
--- a/net/etherboot/distinfo
+++ b/net/etherboot/distinfo
@@ -1,2 +1,2 @@
-MD5 (etherboot-4.2.11.tar.gz) = 9fe7c9a689dfbb7f90b7afa453922598
+MD5 (etherboot-4.5.5.tar.gz) = 0c790b9158d33f03aceb299369bd046e
 MD5 (binutils-2.9.1.0.25.tar.gz) = 2350a282f8fd53b409f523e77fccb904
diff --git a/net/etherboot/files/patch-aa b/net/etherboot/files/patch-aa
index 0e51fdf3df87..25c84b73596c 100644
--- a/net/etherboot/files/patch-aa
+++ b/net/etherboot/files/patch-aa
@@ -1,46 +1,60 @@
-*** Makefile.orig	Thu Nov 25 00:34:35 1999
---- Makefile	Mon Nov 29 14:25:36 1999
+*** Makefile.orig	Sat Mar 18 00:30:20 2000
+--- Makefile	Sat Mar 18 19:46:12 2000
 ***************
-*** 74,79 ****
---- 74,80 ----
-  CFLAGS+=	-DVERSION=\"$(VERSION)\"
-  CFLAGS+=	-DRELOC=$(RELOCADDR)
-  #AS=		/usr/ports/net/etherboot/work/binutils-2.9.1.0.25/gas/as-new
-+ AS=          `echo ../../bin*/gas/as-new`
+*** 90,95 ****
+--- 90,98 ----
+  IDENT16=		'Etherboot/16 $(VERSION) (GPL) $@'
+  IDENT32=		'Etherboot/32 $(VERSION) (GPL) $@'
   
-  IDENT=		'Etherboot/$(BITS) $(VERSION) (GPL) $@'
-  # Stack must be below 640kb so we have real memory there
-***************
-*** 102,108 ****
-  
-  # Exactly one of the following definitions for AS86 should be uncommented
-  # If you have not made any changes to the *.asm files (most people)
-! AS86=		none
-  # If you have made changes to the *.asm files
-  # and you want to rebuild *loader.bin and floppyload.bin and you have as86
-  # from the ELKS Dev86 package (not the one that normally comes with Linux)
---- 103,109 ----
-  
-  # Exactly one of the following definitions for AS86 should be uncommented
-  # If you have not made any changes to the *.asm files (most people)
-! #AS86=		none
-  # If you have made changes to the *.asm files
-  # and you want to rebuild *loader.bin and floppyload.bin and you have as86
-  # from the ELKS Dev86 package (not the one that normally comes with Linux)
++ AS=          `echo ../../bin*/gas/as-new`
++ LD32=          `echo ../../bin*/ld/ld-new`
++ 
+  # Find out if we're using binutils 2.9.5 which uses a different syntax in some
+  # places (most prominently in the opcode prefix area).
+  NEWGAS:=	$(shell $(AS) --version | grep -q '2\.9\.1' || echo -DGAS295)
 ***************
-*** 111,117 ****
-  # If you have made changes to the *.asm files
-  # and you want to rebuild *loader.bin and floppyload.bin and you have nasm
-  # (not most people)
+*** 142,148 ****
+  #AS86=		as86
+  # If you have made changes to the *.S files and you want to rebuild *loader.bin
+  # and {floppy,com}load.bin and you have nasm (not most people)
 ! #AS86=		nasm
   
   # if your as has trouble with the data32 directive, uncomment this
   # but note that the premade start*.o will be larger than necessary because it
---- 112,118 ----
-  # If you have made changes to the *.asm files
-  # and you want to rebuild *loader.bin and floppyload.bin and you have nasm
-  # (not most people)
+--- 145,151 ----
+  #AS86=		as86
+  # If you have made changes to the *.S files and you want to rebuild *loader.bin
+  # and {floppy,com}load.bin and you have nasm (not most people)
 ! AS86=		nasm
   
   # if your as has trouble with the data32 directive, uncomment this
   # but note that the premade start*.o will be larger than necessary because it
+***************
+*** 166,171 ****
+--- 169,175 ----
+  PRLOADER=	bin/prloader.bin
+  RZLOADER=	bin/rzloader.bin
+  PRZLOADER=	bin/przloader.bin
++ FLOPPYLOAD=	floppyload.bin.pre
+  COMLOAD=	bin/comload.bin
+  endif
+  
+*** Config.orig	Sat Mar 18 00:27:39 2000
+--- Config	Mon Mar 20 11:15:44 2000
+***************
+*** 114,120 ****
+  CFLAGS32+=	-DPASSWD -DUSRPARMS -DFLOPPY
+  
+  # For a serial console, which can run in parallel with CRT console
+! CFLAGS32+=	-DCONSOLE_DUAL -DCOMCONSOLE=0x3f8 -DCONSPEED=57600
+  
+  # Enable generic ELF, Multiboot ELF or FreeBSD ELF/a.out boot image support
+  CFLAGS32+=	-DELF_IMAGE -DAOUT_IMAGE -DIMAGE_MULTIBOOT -DIMAGE_FREEBSD
+--- 114,120 ----
+  CFLAGS32+=	-DPASSWD -DUSRPARMS -DFLOPPY
+  
+  # For a serial console, which can run in parallel with CRT console
+! #CFLAGS32+=	-DCONSOLE_DUAL -DCOMCONSOLE=0x3f8 -DCONSPEED=9600
+  
+  # Enable generic ELF, Multiboot ELF or FreeBSD ELF/a.out boot image support
+  CFLAGS32+=	-DELF_IMAGE -DAOUT_IMAGE -DIMAGE_MULTIBOOT -DIMAGE_FREEBSD
diff --git a/net/etherboot/files/patch-ab b/net/etherboot/files/patch-ab
index 9ca112f881a3..78d06d38afac 100644
--- a/net/etherboot/files/patch-ab
+++ b/net/etherboot/files/patch-ab
@@ -1,19 +1,14 @@
-*** Config.orig	Fri Oct 22 09:20:07 1999
---- Config	Fri Oct 22 09:20:40 1999
+*** linux-asm-string.h.orig	Sat Mar 18 20:15:54 2000
+--- linux-asm-string.h	Sat Mar 18 20:40:49 2000
 ***************
-*** 82,88 ****
-  CFLAGS+=	-DMOTD -DIMAGE_MENU
+*** 19,27 ****
+   *		consider these trivial functions to be PD.
+   */
   
-  # Enable for FreeBSD boot image support
-! # CFLAGS+=	-DAOUT_IMAGE -DELF_IMAGE
+- #ifndef		__FreeBSD__
+  typedef int	size_t;
+- #endif
   
-  # For prompting and default on timeout
-  # CFLAGS+=	-DASK_BOOT=2 -DANS_DEFAULT=ANS_NETWORK
---- 82,88 ----
-  CFLAGS+=	-DMOTD -DIMAGE_MENU
-  
-  # Enable for FreeBSD boot image support
-! CFLAGS+=	-DAOUT_IMAGE -DELF_IMAGE
-  
-  # For prompting and default on timeout
-  # CFLAGS+=	-DASK_BOOT=2 -DANS_DEFAULT=ANS_NETWORK
+  extern void *__memcpy(void * to, const void * from, size_t n);
+  extern void *__constant_memcpy(void * to, const void * from, size_t n);
+--- 19,25 ----
diff --git a/net/etherboot/pkg-descr b/net/etherboot/pkg-descr
index 51c8e1d50155..84c661fac536 100644
--- a/net/etherboot/pkg-descr
+++ b/net/etherboot/pkg-descr
@@ -2,8 +2,7 @@ This code was originaly from FreeBSD and then the Linux folks greatly
 enhanced its functionality and capabilities.  It tftp's the kernel 
 and boots it.  It also has a menu capability.
 
-.rom & .com images are built in work/etherboot/src-32.  Edit "Config"
-in that directory for more features.
-
-Note this is a memory corruption issue when I pre-populate the bootinfo
-structure I need to look at it more.
+.rom images are built in work/etherboot/src/bin32.  Edit "Config"
+in work/etherboot/src directory for more features.  To make a floppy
+image cd in work/etherboot/src and type gmake bin32/<device type>.fd0 .
+.com images are made via  gmake bin32/<device type>.com .