diff options
author | arved <arved@FreeBSD.org> | 2003-07-21 21:54:04 +0800 |
---|---|---|
committer | arved <arved@FreeBSD.org> | 2003-07-21 21:54:04 +0800 |
commit | bfb3ef6b1fce53699c21b8037d9c9866fbb122f0 (patch) | |
tree | 1988f96718e3f0f0d73c845a791583bea5543d0e /print/ghostscript-afpl | |
parent | f627a5c6645a879580f98a40d7634fdb4021a23f (diff) | |
download | freebsd-ports-gnome-bfb3ef6b1fce53699c21b8037d9c9866fbb122f0.tar.gz freebsd-ports-gnome-bfb3ef6b1fce53699c21b8037d9c9866fbb122f0.tar.zst freebsd-ports-gnome-bfb3ef6b1fce53699c21b8037d9c9866fbb122f0.zip |
Back out my previous commit, it is unnecessary.
Take measures to cope with too frequent update (without version numbering)
of Samsung-SmartGDI driver
PR: 54707
Submitted by: KATO Tsuguru <tkato@prontomail.com>
Diffstat (limited to 'print/ghostscript-afpl')
-rw-r--r-- | print/ghostscript-afpl/Makefile | 144 | ||||
-rw-r--r-- | print/ghostscript-afpl/distinfo | 3 | ||||
-rw-r--r-- | print/ghostscript-afpl/files/patch-src:gdevgdi.c | 978 | ||||
-rw-r--r-- | print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak | 16 |
4 files changed, 1062 insertions, 79 deletions
diff --git a/print/ghostscript-afpl/Makefile b/print/ghostscript-afpl/Makefile index 1213a2b79197..d7ee7ff44cfd 100644 --- a/print/ghostscript-afpl/Makefile +++ b/print/ghostscript-afpl/Makefile @@ -7,7 +7,7 @@ PORTNAME= ghostscript PORTVERSION= ${GS_VERSION} -PORTREVISION= 1 +PORTREVISION= 2 PORTEPOCH= 1 CATEGORIES= print MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs,gs_fonts,bjc250/} \ @@ -199,7 +199,7 @@ MJC_SRCS= ${MJC_NAME}.tar.gz # GDI - additional driver for Samsung SmartGDI laser printers GDI= gdi GDI_NAME= Samsung-SmartGDI-all-GS -GDI_SRCS= ${GDI_NAME}.tar.gz +GDI_SRCS= ${GDI_NAME}.orig.tar.gz # LXM3200 - additional driver for Lexmark 3200/Z12/Z22/Z31/Z32 LXM3200= lxm3200 @@ -226,77 +226,77 @@ CONTRIB_UPP= lqx70ch.upp lqx70cl.upp lqx70cm.upp \ pre-everything:: .if !defined(A4) - @${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation." + ${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation." .else - @${ECHO_MSG} "Using -DA4 for compilation." + ${ECHO_MSG} "Using -DA4 for compilation." .endif post-extract: - @${ECHO_MSG} ">>> in post-extract ..." + ${ECHO_MSG} ">>> in post-extract ..." # ** 3rd party driver ** # Note: don't forget to add those devices in scripts/configure and # configure.batch, which update unix-gcc.mak to build gs with these # new devices ! # # for HP2200 driver - @${ECHO_MSG} ">>> extracting ${HP2200_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${HP2200_SRCS} ..." ${MKDIR} ${WRKSRC}/${HP2200} ${TAR} -C ${WRKSRC}/${HP2200} -xzf ${DISTDIR}/${DIST_SUBDIR}/${HP2200_SRCS} # for DJ970 driver - @${ECHO_MSG} ">>> extracting ${DJ970_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${DJ970_SRCS} ..." ${CP} ${DISTDIR}/${DIST_SUBDIR}/${DJ970_SRCS} ${WRKSRC}/src ${GUNZIP_CMD} ${WRKSRC}/src/${DJ970_SRCS} # for MD2K driver - @${ECHO_MSG} ">>> extracting ${MD2K_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${MD2K_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MD2K_SRCS} ${LN} -sf ${MD2K_NAME} ${WRKSRC}/${MD2K} # for ALPS driver - @${ECHO_MSG} ">>> extracting ${ALPS_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${ALPS_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${ALPS_SRCS} ${LN} -sf ${ALPS_NAME} ${WRKSRC}/${ALPS} # for BJ10V driver - @${ECHO_MSG} ">>> extracting ${BJ10V_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${BJ10V_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${BJ10V_SRCS} # for BJC250 driver - @${ECHO_MSG} ">>> extracting ${BJC250_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${BJC250_SRCS} ..." ${MKDIR} ${WRKSRC}/${BJC250_NAME}/src ${GZCAT} ${DISTDIR}/${DIST_SUBDIR}/${BJC250_SRCS} | \ ${PATCH} -d ${WRKSRC}/${BJC250_NAME} -f -s -N -E -p1 \ 2>/dev/null || ${TRUE} ${LN} -sf ${BJC250_NAME} ${WRKSRC}/${BJC250} # for CPCA driver - @${ECHO_MSG} ">>> extracting ${CPCA_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${CPCA_SRCS} ..." ${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${CPCA_SRCS} # for LIPS driver - @${ECHO_MSG} ">>> extracting ${LIPS_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${LIPS_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LIPS_SRCS} ${LN} -sf ${LIPS_NAME} ${WRKSRC}/${LIPS} # for DMPRT driver - @${ECHO_MSG} ">>> extracting ${DMPRT_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${DMPRT_SRCS} ..." ${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${DMPRT_SRCS} # for EPAG driver - @${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${EPAG_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS} # for EPLASER driver - @${ECHO_MSG} ">>> extracting ${EPLASER_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${EPLASER_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPLASER_SRCS} ${LN} -sf ${EPLASER_NAME} ${WRKSRC}/${EPLASER} # for MJC driver - @${ECHO_MSG} ">>> extracting ${MJC_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${MJC_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MJC_SRCS} ${LN} -sf ${MJC_NAME} ${WRKSRC}/${MJC} # for GDI driver - @${ECHO_MSG} ">>> extracting ${GDI_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${GDI_SRCS} ..." ${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${GDI_SRCS} # for LXM3200 driver - @${ECHO_MSG} ">>> extracting ${LXM3200_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${LXM3200_SRCS} ..." ${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LXM3200_SRCS} ${LN} -sf ${LXM3200_NAME} ${WRKSRC}/${LXM3200} # for LX5000 driver - @${ECHO_MSG} ">>> extracting ${LX5000_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${LX5000_SRCS} ..." ${CP} ${DISTDIR}/${DIST_SUBDIR}/${LX5000_SRCS} ${WRKSRC}/src # for LEX7000 driver - @${ECHO_MSG} ">>> extracting ${LEX7000_SRCS} ..." + ${ECHO_MSG} ">>> extracting ${LEX7000_SRCS} ..." ${MKDIR} ${WRKSRC}/${LEX7000} ${CAT} ${DISTDIR}/${DIST_SUBDIR}/${LEX7000_SRCS} | \ ${PATCH} -d ${WRKSRC}/${LEX7000} -f -s -N -E -p1 \ @@ -317,152 +317,152 @@ post-patch: # here we apply the modifications necessary to build the 3rd party drivers # advantage: you see unmodified makefiles after a pure make extract pre-configure: - @${ECHO_MSG} ">>> in pre-configure ..." + ${ECHO_MSG} ">>> in pre-configure ..." # for HP2200 driver - @${ECHO_MSG} ">>> adding ${HP2200} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${HP2200} driver to contrib.mak ..." ${CAT} ${FILESDIR}/chp2200.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for DJ970 driver - @${ECHO_MSG} ">>> adding ${DJ970} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${DJ970} driver to contrib.mak ..." ${CAT} ${FILESDIR}/dj970.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for MD2K driver - @${ECHO_MSG} ">>> adding ${MD2K} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${MD2K} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${MD2K_NAME}/gdevmd2k.mak-5.50 \ >> ${WRKSRC}/src/contrib.mak # for ALPS driver - @${ECHO_MSG} ">>> adding ${ALPS} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${ALPS} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${ALPS_NAME}/gdevalps.mak-5.50 \ >> ${WRKSRC}/src/contrib.mak # for BJ10V driver - @${ECHO_MSG} ">>> adding ${BJ10V} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${BJ10V} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${BJ10V_NAME}/gdev10v.mak \ >> ${WRKSRC}/src/contrib.mak # for BJC250 driver - @${ECHO_MSG} ">>> adding ${BJC250} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${BJC250} driver to contrib.mak ..." ${CAT} ${FILESDIR}/bjc250.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for CPCA driver - @${ECHO_MSG} ">>> adding ${CPCA} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${CPCA} driver to contrib.mak ..." ${CAT} ${WRKSRC}/src/cpca_gdev.mak \ >> ${WRKSRC}/src/contrib.mak # for LIPS driver - @${ECHO_MSG} ">>> adding ${LIPS} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${LIPS} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${LIPS_NAME}/gdevlips.mak \ >> ${WRKSRC}/src/contrib.mak # for DMPRT driver - @${ECHO_MSG} ">>> adding ${DMPRT} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${DMPRT} driver to contrib.mak ..." ${CAT} ${WRKSRC}/src/gdevdmpr.mak \ >> ${WRKSRC}/src/contrib.mak # for EPAG driver - @${ECHO_MSG} ">>> adding ${EPAG} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${EPAG} driver to contrib.mak ..." ${CAT} ${FILESDIR}/epag.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for EPLASER driver - @${ECHO_MSG} ">>> adding ${EPLASER} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${EPLASER} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevescv6.mak \ >> ${WRKSRC}/src/contrib.mak ${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevesmv6.mak \ >> ${WRKSRC}/src/contrib.mak # for MJC driver - @${ECHO_MSG} ">>> adding ${MJC} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${MJC} driver to contrib.mak ..." ${CAT} ${WRKSRC}/${MJC_NAME}/gdevmjc.mak \ >> ${WRKSRC}/src/contrib.mak # for GDI driver - @${ECHO_MSG} ">>> adding ${GDI} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${GDI} driver to contrib.mak ..." ${CAT} ${WRKSRC}/src/smartgdi-contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for LXM3200 driver - @${ECHO_MSG} ">>> adding ${LXM3200} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${LXM3200} driver to contrib.mak ..." ${CAT} ${FILESDIR}/lxm3200.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for LX5000 driver - @${ECHO_MSG} ">>> adding ${LX5000} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${LX5000} driver to contrib.mak ..." ${CAT} ${FILESDIR}/lx5000.contrib.mak \ >> ${WRKSRC}/src/contrib.mak # for LEX7000 driver - @${ECHO_MSG} ">>> adding ${LEX7000} driver to contrib.mak ..." + ${ECHO_MSG} ">>> adding ${LEX7000} driver to contrib.mak ..." ${CAT} ${FILESDIR}/lex7000.contrib.mak \ >> ${WRKSRC}/src/contrib.mak pre-build: - @${ECHO_MSG} ">>> in pre-build ..." - @${ECHO_MSG} ">>> creating directories for compilation ..." + ${ECHO_MSG} ">>> in pre-build ..." + ${ECHO_MSG} ">>> creating directories for compilation ..." ${MKDIR} ${WRKSRC}/obj ${MKDIR} ${WRKSRC}/bin # for HP2200 driver - @${ECHO_MSG} ">>> creating symlinks for ${HP2200} ..." + ${ECHO_MSG} ">>> creating symlinks for ${HP2200} ..." .for i in gdevcd8.c ${LN} -sf ${WRKSRC}/${HP2200}/${i} ${WRKSRC}/src .endfor # for MD2K driver - @${ECHO_MSG} ">>> creating symlinks for ${MD2K} ..." + ${ECHO_MSG} ">>> creating symlinks for ${MD2K} ..." .for i in gdevmd2k.c ${LN} -sf ${WRKSRC}/${MD2K_NAME}/${i} ${WRKSRC}/src .endfor # for ALPS driver - @${ECHO_MSG} ">>> creating symlinks for ${ALPS} ..." + ${ECHO_MSG} ">>> creating symlinks for ${ALPS} ..." .for i in gdevalps.c ${LN} -sf ${WRKSRC}/${ALPS_NAME}/${i} ${WRKSRC}/src .endfor # for BJ10V driver - @${ECHO_MSG} ">>> creating symlinks for ${BJ10V} ..." + ${ECHO_MSG} ">>> creating symlinks for ${BJ10V} ..." .for i in gdev10v.c ${LN} -sf ${WRKSRC}/${BJ10V_NAME}/${i} ${WRKSRC}/src .endfor # for BJC250 driver - @${ECHO_MSG} ">>> creating symlinks for ${BJC250} ..." + ${ECHO_MSG} ">>> creating symlinks for ${BJC250} ..." .for i in gdevbjc_.[ch] gdevbjca.c ${LN} -sf ${WRKSRC}/${BJC250_NAME}/src/${i} ${WRKSRC}/src .endfor # for LIPS driver - @${ECHO_MSG} ">>> creating symlinks for ${LIPS} ..." + ${ECHO_MSG} ">>> creating symlinks for ${LIPS} ..." .for i in gdevlips.[ch] gdevlprn.[ch] gdevl4r.c gdevl4v.c gdevespg.c \ gdevnpdl.c gdevrpdl.c ${LN} -sf ${WRKSRC}/${LIPS_NAME}/${i} ${WRKSRC}/src .endfor # for EPAG driver - @${ECHO_MSG} ">>> building ${EPAG} utility ..." + ${ECHO_MSG} ">>> building ${EPAG} utility ..." cd ${WRKSRC}/${EPAG_NAME} ; \ ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile - @${ECHO_MSG} ">>> creating symlinks for ${EPAG} ..." + ${ECHO_MSG} ">>> creating symlinks for ${EPAG} ..." .for i in gdevepag.c ${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src .endfor # for EPLASER driver - @${ECHO_MSG} ">>> creating symlinks for ${EPLASER} ..." + ${ECHO_MSG} ">>> creating symlinks for ${EPLASER} ..." .for i in gdevescv.[ch] gdevesmv.c ${LN} -sf ${WRKSRC}/${EPLASER_NAME}/${i} ${WRKSRC}/src .endfor # for MJC driver - @${ECHO_MSG} ">>> creating symlinks for ${MJC} ..." + ${ECHO_MSG} ">>> creating symlinks for ${MJC} ..." .for i in gdevmjc.c mjbarrie.c mjbksep.c mjespdtc.c mjespdtm.c mjespdty.c \ mjgrnsp.c mjgrnsp2.c mjhtocmy.c mjmtx2.c mjvtbl.c ${LN} -sf ${WRKSRC}/${MJC_NAME}/${i} ${WRKSRC}/src .endfor # for LXM3200 driver - @${ECHO_MSG} ">>> creating symlinks for ${LXM3200} ..." + ${ECHO_MSG} ">>> creating symlinks for ${LXM3200} ..." .for i in gdevlx32.c ${LN} -sf ${WRKSRC}/${LXM3200_NAME}/${i} ${WRKSRC}/src .endfor # for LEX7000 driver - @${ECHO_MSG} ">>> creating symlinks for ${LEX7000} ..." + ${ECHO_MSG} ">>> creating symlinks for ${LEX7000} ..." .for i in gdevlx7.c ${LN} -sf ${WRKSRC}/${LEX7000}/src/${i} ${WRKSRC}/src .endfor pre-install: - @${ECHO_MSG} ">>> in pre-install ..." - @${ECHO_MSG} ">>> creating ghostscript destdir ..." + ${ECHO_MSG} ">>> in pre-install ..." + ${ECHO_MSG} ">>> creating ghostscript destdir ..." ${MKDIR} ${DATADIR} - @${ECHO_MSG} ">>> extracting ghostscript fonts ..." + ${ECHO_MSG} ">>> extracting ghostscript fonts ..." ${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_STD} ${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_OTHER} ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR} post-install: - @${ECHO_MSG} ">>> in post-install ..." - @${ECHO_MSG} ">>> stripping gs ..." + ${ECHO_MSG} ">>> in post-install ..." + ${ECHO_MSG} ">>> stripping gs ..." .if defined(WITH_SHLIB) ${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx ${LN} -sf gsc ${PREFIX}/bin/gs @@ -470,16 +470,16 @@ post-install: ${STRIP_CMD} ${PREFIX}/bin/gs .endif # for DMPRT driver - @${ECHO_MSG} ">>> installing ${DMPRT} resources ..." + ${ECHO_MSG} ">>> installing ${DMPRT} resources ..." .for i in dmp_init.ps dmp_site.ps escp_24.src ${INSTALL_DATA} ${WRKSRC}/src/${i} \ ${DATADIR}/${GS_VERSION}/lib .endfor # for EPAG driver - @${ECHO_MSG} ">>> installing ${EPAG} utility in bindir ..." + ${ECHO_MSG} ">>> installing ${EPAG} utility in bindir ..." ${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin # contributed UPP driver - @${ECHO_MSG} ">>> installing contributed UPP profiles ..." + ${ECHO_MSG} ">>> installing contributed UPP profiles ..." .for i in ${CONTRIB_UPP} ${INSTALL_DATA} ${FILESDIR}/${i} \ ${DATADIR}/${GS_VERSION}/lib @@ -488,45 +488,45 @@ post-install: # now NOPORTDOCS dependend stuff # .if !defined(NOPORTDOCS) - @${ECHO_MSG} ">>> installing PORTDOC stuff ..." + ${ECHO_MSG} ">>> installing PORTDOC stuff ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION} # for MD2K driver - @${ECHO_MSG} ">>> installing ${MD2K} docs ..." + ${ECHO_MSG} ">>> installing ${MD2K} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MD2K} .for i in README.jis ${INSTALL_DATA} ${WRKSRC}/${MD2K_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${MD2K} .endfor # for ALPS driver - @${ECHO_MSG} ">>> installing ${ALPS} docs ..." + ${ECHO_MSG} ">>> installing ${ALPS} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${ALPS} .for i in README.gdevalps ${INSTALL_DATA} ${WRKSRC}/${ALPS_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${ALPS} .endfor # for BJ10V driver - @${ECHO_MSG} ">>> installing ${BJ10V} docs ..." + ${ECHO_MSG} ">>> installing ${BJ10V} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${BJ10V} .for i in gdev10v.jis ${INSTALL_DATA} ${WRKSRC}/${BJ10V_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${BJ10V} .endfor # for LIPS driver - @${ECHO_MSG} ">>> installing ${LIPS} docs ..." + ${ECHO_MSG} ">>> installing ${LIPS} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LIPS} .for i in Gdevlips.htm ${INSTALL_DATA} ${WRKSRC}/${LIPS_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${LIPS} .endfor # for DMPRT driver - @${ECHO_MSG} ">>> installing ${DMPRT} docs ..." + ${ECHO_MSG} ">>> installing ${DMPRT} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${DMPRT} .for i in gdevdmpr.sj ${INSTALL_DATA} ${WRKSRC}/src/${i} \ ${DOCSDIR}/${GS_VERSION}/${DMPRT} .endfor # for EPAG driver - @${ECHO_MSG} ">>> installing ${EPAG} docs ..." + ${ECHO_MSG} ">>> installing ${EPAG} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG} .for i in ert.txt gdevepag.txt ChangeLog ${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \ @@ -537,35 +537,35 @@ post-install: ${DOCSDIR}/${GS_VERSION}/${EPAG} .endfor # for EPLASER driver - @${ECHO_MSG} ">>> installing ${EPLASER} docs ..." + ${ECHO_MSG} ">>> installing ${EPLASER} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPLASER} .for i in readme-eplaser-652.euc readme-eplaser-652-jp.euc ${INSTALL_DATA} ${WRKSRC}/${EPLASER_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${EPLASER} .endfor # for MJC driver - @${ECHO_MSG} ">>> installing ${MJC} docs ..." + ${ECHO_MSG} ">>> installing ${MJC} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MJC} .for i in MJ700V2C.FAQ README.mjc README.mje README.noz cpem.doc ${INSTALL_DATA} ${WRKSRC}/${MJC_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${MJC} .endfor # for GDI driver - @${ECHO_MSG} ">>> installing ${GDI} docs ..." + ${ECHO_MSG} ">>> installing ${GDI} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${GDI} .for i in README ${INSTALL_DATA} ${WRKSRC}/src/${i} \ ${DOCSDIR}/${GS_VERSION}/${GDI} .endfor # for LXM3200 driver - @${ECHO_MSG} ">>> installing ${LXM3200} docs ..." + ${ECHO_MSG} ">>> installing ${LXM3200} docs ..." ${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LXM3200} .for i in README RELEASE_NOTES Z12-Z31-QuickSetup ${INSTALL_DATA} ${WRKSRC}/${LXM3200_NAME}/${i} \ ${DOCSDIR}/${GS_VERSION}/${LXM3200} .endfor .endif - @${ECHO_MSG} "> post-installation tasks completed." + ${ECHO_MSG} "> post-installation tasks completed." .include "Makefile.inc" .include <bsd.port.post.mk> diff --git a/print/ghostscript-afpl/distinfo b/print/ghostscript-afpl/distinfo index cda51478eb7b..f296b89ced95 100644 --- a/print/ghostscript-afpl/distinfo +++ b/print/ghostscript-afpl/distinfo @@ -13,8 +13,7 @@ MD5 (ghostscript/dmprt-2.01.tar.gz) = c7a9fb127fde5d888a798bf5e1822b88 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3 MD5 (ghostscript/eplaser-3.0.6-652.tgz) = a575b9f3424d0a9ab6fbb5619429a8fd MD5 (ghostscript/gdevmjc-0.8.tar.gz) = 228f41c3cccce22c8f477c7a9407527c -MD5 (ghostscript/Samsung-SmartGDI-all-GS.tar.gz) = 806c486599f91aef46270fde5504bc6f +MD5 (ghostscript/Samsung-SmartGDI-all-GS.orig.tar.gz) = 61decc4e00a64271948cbb581876352b MD5 (ghostscript/lxm3200-tweaked-20030501.tar.gz) = 0f88082030c6eb66a95804a6cc9b9e6b MD5 (ghostscript/gdevlx50.c) = 081e355c866316a56fbbff5b59f2b7cf MD5 (ghostscript/gs6.0.lexmark7000.patch) = fd5018c18351bf64805fe5727be196de -MD5 (ghostscript/Samsung-SmartGDI-all-GS.tar.gz) = e6963f6c9460a964fe57d38479bbdd41 diff --git a/print/ghostscript-afpl/files/patch-src:gdevgdi.c b/print/ghostscript-afpl/files/patch-src:gdevgdi.c index f59111ee2591..996758e09685 100644 --- a/print/ghostscript-afpl/files/patch-src:gdevgdi.c +++ b/print/ghostscript-afpl/files/patch-src:gdevgdi.c @@ -1,15 +1,983 @@ --- src/gdevgdi.c.orig Wed Jun 19 19:32:49 2002 -+++ src/gdevgdi.c Sun Nov 10 22:37:00 2002 -@@ -86,9 +86,9 @@ ++++ src/gdevgdi.c Mon Jul 21 13:44:41 2003 +@@ -60,8 +60,8 @@ + #define GDI_REPEAT_LENGTH 2 + #define GDI_BAND_HEIGHT 128 + #define GDI_MAX_BAND 66 +-//#define GDI_BAND_WIDTH 4928 +-//#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4) ++/*#define GDI_BAND_WIDTH 4928*/ ++/*#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4)*/ + + #define GDI_PRE_COMP 2 + #define GDI_REAL_COMP 0 +@@ -74,8 +74,8 @@ + + #define GDI_MARGINS_A4 0.167, 0.167, 0.167, 0.167 + #define GDI_MARGINS_LETTER 0.167, 0.167, 0.167, 0.167 +-//#define GDI_MARGINS_A4 0.0, 0.0, 0.0, 0.0 +-//#define GDI_MARGINS_LETTER 0.0, 0.0, 0.0, 0.0 ++/*#define GDI_MARGINS_A4 0.0, 0.0, 0.0, 0.0*/ ++/*#define GDI_MARGINS_LETTER 0.0, 0.0, 0.0, 0.0*/ + + /* The number of blank lines that make it worthwhile to reposition */ + /* the cursor. */ +@@ -86,9 +86,15 @@ int GDI_BAND_WIDTH[] = {4768, 4928}; --private int gdi_print_page(P2(gx_device_printer *pdev, FILE *prn_stream)); --private int gdi_open(P1(gx_device *pdev)); --private int gdi_close(P1(gx_device *pdev)); ++#if GS_VERSION_MAJOR >= 8 +private int gdi_print_page(gx_device_printer *pdev, FILE *prn_stream); +private int gdi_open(gx_device *pdev); +private int gdi_close(gx_device *pdev); ++#else + private int gdi_print_page(P2(gx_device_printer *pdev, FILE *prn_stream)); + private int gdi_open(P1(gx_device *pdev)); + private int gdi_close(P1(gx_device *pdev)); ++#endif /* The device descriptors */ private dev_proc_open_device(gdi_open); +@@ -107,6 +113,14 @@ + 1, /* color bit */ + gdi_print_page); + ++gx_device_printer far_data gs_samsunggdi_device = ++ prn_device(prn_gdi_procs, "samsunggdi", ++ DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS, /* paper size (unit : 10/72 inch size) */ ++ X_DPI2, Y_DPI2, ++ 0.20, 0.25, 0.25, 0.25, /* margins filled in by gdi_open */ ++ 1, /* color bit */ ++ gdi_print_page); ++ + private FILE *WritePJLHeaderData(gx_device_printer *pdev, FILE *fp); + private FILE *WriteBandHeader(FILE *fp, unsigned int usBandNo, + unsigned char ubCompMode, unsigned int usBandWidth, +@@ -220,7 +234,7 @@ + memset(obp, 0x00, ul_band_size*13/10); + for (j=0; j<band_height; j++) { + memset(tmp, 0x00, raster); +- //code = gdev_prn_copy_scan_lines(pdev, i*band_height+j, ++ /*code = gdev_prn_copy_scan_lines(pdev, i*band_height+j, */ + if (y == num_rows) break; + code = gdev_prn_copy_scan_lines(pdev, y++, + (byte*)tmp, raster); +@@ -232,15 +246,71 @@ + + /* Write Band Data + Because of Scanline compression, extract Scanline compression mode */ +- //ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP); +- //ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP); +- //ul_min_size = (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size; ++ /*ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/ ++ /*ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/ ++ /*ul_min_size = (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size;*/ + ul_min_size = ul_tiff_size; + compression_type = GDI_COMP_MODITIFF; +- //compression_type = (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE; ++ /*compression_type = (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE;*/ + switch (compression_type) { + case GDI_COMP_MODITIFF: ++#define FUDGE_BIG_BANDS ++#ifndef FUDGE_BIG_BANDS + ul_comp_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP); ++#else ++ { ++ /* Very ugly. The printer will hose if the compressed ++ band size is over 65536, so we "fudge" the data in ++ this case repeatedly until we get what we want. ++ ++ The fudge algorithm is simple, this is kinda-sorta ++ RLE, so we just round groups of bits in groups of ++ 2, then 3, then 4, etc until the thing works. */ ++#define MAXBAND 0xffff ++#define ASSERT(x) ++ int fudge=0; ++ byte *use_band=ibp; ++ do { ++ ul_comp_size = FrameTiffComp(obp, use_band, ++ band_height, band_width_bytes, ++ GDI_REAL_COMP); ++ if (ul_comp_size > MAXBAND-8) { ++ int f, g, h; ++ if (!fudge) { ++ ASSERT(use_band == ibp); ++ use_band = (byte*)gs_malloc(ul_band_size, 1, "gdi_print_page/fudge"); ++ fudge=1; ++ } ++ memcpy(use_band, ibp, ul_band_size); ++ fudge++; ++ ASSERT(fudge>=2); ++ { ++#define FUDGE2(x) ( (((((x)>>6)&0x3)?3:0)<<6) \ ++ | (((((x)>>4)&0x3)?3:0)<<4) \ ++ | (((((x)>>2)&0x3)?3:0)<<2) \ ++ | (((((x)>>0)&0x3)?3:0)) ) ++#define FUDGE4(x) ( (((((x)>>4)&0xf)?0xf:0)<<4) \ ++ | (((((x)>>0)&0xf)?0xf:0)) ) ++#define FUDGE8(x) ( (((((x)>>0)&0xff)?0xf:0)) ) ++#define FUDGE(fudge, x) ( (fudge == 2 ? FUDGE2(x) \ ++ : fudge == 3 ? FUDGE4(x) \ ++ : fudge == 4 ? FUDGE8(x) \ ++ : 0 ) ) ++ ++ for(f=0;f<ul_band_size; f++) { ++ use_band[f] = FUDGE(fudge, ibp[f]); ++ } ++ } ++ } ++ } while (ul_comp_size > MAXBAND-8); ++ oh_well: ++ if (fudge > 1) { ++ ASSERT(use_band != ibp); ++ gs_free(use_band, ul_band_size, 1, "gdi_print_page/fudge"); ++ /*fprintf(stderr, "smartgdi: band %d fudge factor is %d\n", i, fudge);*/ ++ } ++ } ++#endif + break; + case GDI_COMP_SCANLINE: + ul_comp_size = bmp2run(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP); +@@ -253,7 +323,7 @@ + + prn_stream = WriteBandHeader(prn_stream, i, compression_type, (band_width_bytes * 8), + band_height, ul_comp_size); +- //fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size); ++ /*fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size);*/ + fwrite(obp, ul_comp_size, 1, prn_stream); + } + +@@ -271,50 +341,50 @@ + unsigned char buffer[300]; + int dots_per_inch = (int)pdev->y_pixels_per_inch; + +- strcpy(buffer, "\x1b%-12345X"); ++ strcpy(buffer, "\033%-12345X"); + +- // Paper Type +- strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\x0d\x0a"); +- //Density +- strcat(buffer, "@PJL SET DENSITY = 1\x0d\x0a"); +- // Toner Save +- strcat(buffer, "@PJL SET TONERSAVE = OFF\x0d\x0a"); +- // Enter Language SMART +- strcat(buffer, "@PJL ENTER LANGUAGE = SMART\x0d\x0a"); +- // JobStart +- strcat(buffer, "$PJL JOB START\x0d\x0a"); ++ /* Paper Type*/ ++ strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\015\012"); ++ /*Density*/ ++ strcat(buffer, "@PJL SET DENSITY = 1\015\012"); ++ /* Toner Save*/ ++ strcat(buffer, "@PJL SET TONERSAVE = OFF\015\012"); ++ /* Enter Language SMART*/ ++ strcat(buffer, "@PJL ENTER LANGUAGE = SMART\015\012"); ++ /* JobStart*/ ++ strcat(buffer, "$PJL JOB START\015\012"); + +- // Resolution ++ /* Resolution*/ + if (dots_per_inch == 600) +- strcat(buffer, "$PJL RESOLUTION = 600\x0d\x0a"); ++ strcat(buffer, "$PJL RESOLUTION = 600\015\012"); + else +- strcat(buffer, "$PJL RESOLUTION = 300\x0d\x0a"); ++ strcat(buffer, "$PJL RESOLUTION = 300\015\012"); + +- // Copies +- strcat(buffer, "$PJL COPIES = 1\x0d\x0a"); +- // Paper Size ++ /* Copies*/ ++ strcat(buffer, "$PJL COPIES = 1\015\012"); ++ /* Paper Size*/ + switch (gdev_pcl_paper_size((gx_device*)pdev)) + { + case PAPER_SIZE_A4: +- strcat(buffer, "$PJL PAGE A4 AUTO\x0d\x0a"); ++ strcat(buffer, "$PJL PAGE A4 AUTO\015\012"); + break; + case PAPER_SIZE_LETTER: +- strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a"); ++ strcat(buffer, "$PJL PAGE LETTER AUTO\015\012"); + break; + case PAPER_SIZE_LEGAL: +- strcat(buffer, "$PJL PAGE LEGAL AUTO\x0d\x0a"); ++ strcat(buffer, "$PJL PAGE LEGAL AUTO\015\012"); + break; + default: +- strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a"); ++ strcat(buffer, "$PJL PAGE LETTER AUTO\015\012"); + break; + } +- // bitmap start +- strcat(buffer, "$PJL BITMAP START\x0d\x0a"); +- // write buffer to file. ++ /* bitmap start*/ ++ strcat(buffer, "$PJL BITMAP START\015\012"); ++ /* write buffer to file.*/ + ulSize = strlen(buffer); + fwrite(buffer, 1, ulSize, fp ); + return(fp); +-} // WritePJLHeaderData() ++} /* WritePJLHeaderData() */ + + + FILE *WriteBandHeader +@@ -335,33 +405,33 @@ + + ulBandSize += 8; + +- // bandsize ++ /* bandsize*/ + buf[i++] = (unsigned char)((ulBandSize >> 24) & 0xff); + buf[i++] = (unsigned char)((ulBandSize >> 16) & 0xff); + buf[i++] = (unsigned char)((ulBandSize >> 8) & 0xff); + buf[i++] = (unsigned char)(ulBandSize & 0xff); + +- // id ++ /* id */ + buf[i++] = (unsigned char)((usBandNo >> 8) & 0xff); + buf[i++] = (unsigned char)(usBandNo & 0xff); + +- // compress mode ++ /* compress mode */ + buf[i++] = (unsigned char)(ubCompMode & 0xff); + +- // ubLeft ++ /* ubLeft */ + buf[i++] = (unsigned char)(ubLeft & 0xff); + +- // height ++ /* height*/ + buf[i++] = (unsigned char)((usBandHeight >> 8) & 0xff); + buf[i++] = (unsigned char)(usBandHeight & 0xff); + +- // width ++ /* width */ + buf[i++] = (unsigned char)((usBandWidth >> 8) & 0xff); + buf[i++] = (unsigned char)(usBandWidth & 0xff); + + fwrite(buf, 1, i, fp); + return(fp); +-} // end of WriteBandHeader() ++} /* end of WriteBandHeader()*/ + + FILE *WriteTrailerData(FILE *fp) + { +@@ -369,18 +439,18 @@ + unsigned long buffer[200]; + + memset((char*)buffer, 0x00, 200); +- strcpy((char*)buffer, "$PJL PRINT 4\x0d\x0a"); +- strcat((char*)buffer, "$PJL EOJ\x0d\x0a"); +- strcat((char*)buffer, "$PJL SYNC\x0d\x0a"); +- strcat((char*)buffer, "$PJL RELEASE 0 2047\x0d\x0a"); +- strcat((char*)buffer, "$PJL GARBAGE\x0d\x0a"); +- strcat((char*)buffer, "\x1b%-12345X\x0d\x0a"); ++ strcpy((char*)buffer, "$PJL PRINT 4\015\012"); ++ strcat((char*)buffer, "$PJL EOJ\015\012"); ++ strcat((char*)buffer, "$PJL SYNC\015\012"); ++ strcat((char*)buffer, "$PJL RELEASE 0 2047\015\012"); ++ strcat((char*)buffer, "$PJL GARBAGE\015\012"); ++ strcat((char*)buffer, "\033%-12345X\015\012"); + + ulSize = strlen((char*)buffer); + fwrite(buffer, 1, ulSize, fp); + + return(fp); +-} // WriteTrailerData() ++} /* WriteTrailerData()*/ + + unsigned long FrameTiffComp(unsigned char *pubDest, + unsigned char *pubSrc, +@@ -399,7 +469,7 @@ + + for (i = 0; i < usTotalLines; i++) + { +- if (!(ubMode & 0x02)) // ++ if (!(ubMode & 0x02)) + { + usLineSize = FrameTiff_Comp(SrcPtr, TgtPtr, usBytesPerLine); + } +@@ -416,7 +486,7 @@ + ulret += usLineSize; + } + +- if (!(ubMode & 0x02)) // ++ if (!(ubMode & 0x02)) + { + switch (ulret%4) + { +@@ -448,7 +518,7 @@ + } + } + return(ulret); +-} // FrameTiffComp() ++} /* FrameTiffComp()*/ + + unsigned int FrameTiff_Comp(unsigned char *lpSrcBuf, unsigned char *lpTgtBuf, unsigned int nSrcBytes) + { +@@ -528,13 +598,13 @@ + usEndCnt = 16384; + } + usEndCnt = usCount - 2; +- // usEndCnt = usCount - 2; original +- // 19990824 by LSM : for end file while (usEndCnt--) ++ /* usEndCnt = usCount - 2; original*/ ++ /* 19990824 by LSM : for end file while (usEndCnt--)*/ + while (usEndCnt--) + { + /* read next data */ + ubFirst = ubSecond; +- ubSecond = *pubSrc++; // read 3rd Data ++ ubSecond = *pubSrc++; /* read 3rd Data*/ + if (ubFirst == ubSecond) + { + if (usEndCnt <= 1) +@@ -544,7 +614,7 @@ + } + else + { +- ubSecond = *pubSrc++; // read 4th Data ++ ubSecond = *pubSrc++; /* read 4th Data*/ + usEndCnt--; + if (ubFirst == ubSecond) + { +@@ -660,14 +730,14 @@ + { + usEndCnt = 16384; + } +- // usEndCnt = usCount - 2; ++ /* usEndCnt = usCount - 2;*/ + usEndCnt = usCount - 2; +- // 19990824 by LSM : for Last file while (usEndCnt--) ++ /* 19990824 by LSM : for Last file while (usEndCnt--)*/ + while (usEndCnt--) + { + /* read next data */ + ubFirst = ubSecond; +- ubSecond = *pubSrc++; // read 3rd Data ++ ubSecond = *pubSrc++; /* read 3rd Data*/ + if (ubFirst == ubSecond) + { + if (usEndCnt <= 1) +@@ -677,8 +747,8 @@ + } + else + { +- ubSecond = *pubSrc++; // read 4th Data +- usEndCnt--; // 19990824 by LSM ++ ubSecond = *pubSrc++; /* read 4th Data*/ ++ usEndCnt--; /* 19990824 by LSM*/ + if (ubFirst == ubSecond) + { + ubMisCnt = 3; +@@ -691,7 +761,7 @@ + /* save data */ + usControl = (unsigned int) (pubSrc - pubOrg); + usControl -= ubMisCnt; +- // 19990824 by LSM : for fixing GPF on Photoshop ++ /* 19990824 by LSM : for fixing GPF on Photoshop*/ + if (usControl > usCount) + { + usControl = usCount; +@@ -728,77 +798,77 @@ + } sc_tbl; + + static sc_tbl gdi_ScanTbl[256] = { +-{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 }, // 0x00 ++{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 }, /* 0x00*/ + { 5, 1, 0 }, { 0, 0, 1 }, { 5, 2, 0 }, { 5, 3, 1 }, + { 4, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 4, 2, 0 }, { 0, 0, 1 }, { 4, 3, 0 }, { 4, 4, 1 }, +-{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x10 ++{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x10*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 3, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 3, 3, 0 }, { 0, 0, 1 }, { 3, 4, 0 }, { 3, 5, 1 }, +-{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x20 ++{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x20*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x30 ++{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x30*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 2, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 2, 4, 0 }, { 0, 0, 1 }, { 2, 5, 0 }, { 2, 6, 1 }, +-{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x40 ++{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x40*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x50 ++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x50*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x60 ++{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x60*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x70 ++{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x70*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 1, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 1, 5, 0 }, { 0, 0, 1 }, { 1, 6, 0 }, { 1, 7, 1 }, +-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x80 ++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x80*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x90 ++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x90*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xa0 ++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xa0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xb0 ++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xb0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xc0 ++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xc0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xd0 ++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xd0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xe0 ++{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xe0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, +-{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0xf0 ++{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0xf0*/ + { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 5, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, + { 0, 6, 0 }, { 0, 0, 1 }, { 0, 7, 0 }, { 0, 8, 1 }, + }; + + static sc_tbl gdi_ScanTbl4[16] = { +-{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 }, // 0x00 +-{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 }, // 0x04 +-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, // 0x08 +-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 } // 0x0c ++{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 }, /* 0x00*/ ++{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 }, /* 0x04*/ ++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, /* 0x08*/ ++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 } /* 0x0c*/ + }; + + long SaveScanData( unsigned char *, unsigned short, unsigned short, unsigned short, unsigned short, unsigned short ); +@@ -816,32 +886,32 @@ + lWarp = (long)(usWarp << 3); + lDis = ((long)usDy * lWarp) + (long)sDx; + +- // 1st, 2nd, 3rd & 4th byte +- ultmp_dat = 0xc0000000; ++ /* 1st, 2nd, 3rd & 4th byte*/ ++ ultmp_dat = 0xc0000000ul; + if (lDis < 0) + { +- ultmp_dat |= 0x20000000; ++ ultmp_dat |= 0x20000000ul; + } +- ultmp_dat |= (lDis & 0x1fffffff); +- *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000) >> 24); +- *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000) >> 16); +- *out_buf++ = (unsigned char)((ultmp_dat & 0xff00) >> 8); +- *out_buf++ = (unsigned char)(ultmp_dat & 0xff); ++ ultmp_dat |= (lDis & 0x1ffffffful); ++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000ul) >> 24); ++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000ul) >> 16); ++ *out_buf++ = (unsigned char)((ultmp_dat & 0xff00ul) >> 8); ++ *out_buf++ = (unsigned char)(ultmp_dat & 0xfful); + +- // 5th & 6th byte ++ /* 5th & 6th byte*/ + ustmp_dat = 0xc000; + ustmp_dat |= (usRl & 0x3fff); + *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8); + *out_buf++ = (unsigned char)(ustmp_dat & 0xff); + + return(6); +-} // Save6Bytes() ++} /* Save6Bytes()*/ + + long Save4Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx) + { + unsigned short ustmp_dat; + +- // 1st & 2nd byte ++ /* 1st & 2nd byte*/ + ustmp_dat = 0x8000; + if (sDx < 0) + { +@@ -851,7 +921,7 @@ + *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8); + *out_buf++ = (unsigned char)(ustmp_dat & 0xff); + +- // 3rd & 4th byte ++ /* 3rd & 4th byte*/ + ustmp_dat = 0x8000; + ustmp_dat |= ((usDy & 0x03) << 12); + ustmp_dat |= (usRl & 0xfff); +@@ -859,13 +929,13 @@ + *out_buf++ = (unsigned char)(ustmp_dat & 0xff); + + return(4); +-} // end of Save4Bytes() ++} /* end of Save4Bytes()*/ + + long Save2Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx) + { + unsigned char ubtmp_dat; + +- // 1st byte ++ /* 1st byte*/ + ubtmp_dat = 0x00; + if (usDy == 1) + { +@@ -874,7 +944,7 @@ + ubtmp_dat |= (usRl & 0x3f); + *out_buf++ = ubtmp_dat; + +- // 2nd byte ++ /* 2nd byte*/ + if (sDx < 0) + { + ubtmp_dat = 0x80; +@@ -886,7 +956,7 @@ + ubtmp_dat |= ((unsigned char)sDx & 0x7f); + *out_buf++ = ubtmp_dat; + return(2); +-} // end of Save2Bytes() ++} /* end of Save2Bytes()*/ + + long SaveScanData (unsigned char *out_buf, + unsigned short us1Cnt, +@@ -900,26 +970,26 @@ + + sDisX = (int)usPosX01 - (int)usPosX10; + +- // 48 bit ++ /* 48 bit*/ + if ( (usDy > 3) || (us1Cnt > 4095) ) + { + Save6Bytes(out_buf, usDy, us1Cnt, sDisX, usWarp); + lRet = 6; + } +- // 32 bit ++ /* 32 bit*/ + else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) ) + { + Save4Bytes(out_buf, usDy, us1Cnt, sDisX); + lRet = 4; + } +- // 16 bit ++ /* 16 bit*/ + else + { + Save2Bytes(out_buf, usDy, us1Cnt, sDisX); + lRet = 2; + } + return(lRet); +-} // end of SaveScanData() ++} /* end of SaveScanData()*/ + + + long UpdateScanSize (unsigned char *out_buf, +@@ -934,23 +1004,23 @@ + + sDisX = usPosX01 - usPosX10; + +- // 48 bit ++ /* 48 bit*/ + if ( (usDy > 3) || (us1Cnt > 4095) ) + { + lRet = 6; + } +- // 32 bit ++ /* 32 bit*/ + else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) ) + { + lRet = 4; + } +- // 16 bit ++ /* 16 bit*/ + else + { + lRet = 2; + } + return(lRet); +-} // end of UpdateScanSize() by bglee 19981224 ++} /* end of UpdateScanSize() by bglee 19981224*/ + + long GetSimpleScan(unsigned char *out_buf, + unsigned char ubSizeMode, +@@ -983,10 +1053,10 @@ + } + + +- // 1 X 1 X ++ /* 1 X 1 X*/ + if (ubPreBit) + { +- // 1 0 1 X ++ /* 1 0 1 X*/ + if (ubDx) + { + lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth); +@@ -994,23 +1064,23 @@ + *usPosX01 = usBytePos + ubDx; + *us1Count = ubRl; + *usDy = 0; +- // 1 0 1 0 ++ /* 1 0 1 0*/ + if (!ubLastBit) + { +- // 19990330 by bglee ++ /* 19990330 by bglee*/ + out_buf = out_buf + lScanSize; + + lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth); + *usPosX10 = *usPosX01 ; + *us1Count = 0; + } +- // 1 0 1 1 ++ /* 1 0 1 1*/ + } +- // 1 1 1 X ++ /* 1 1 1 X*/ + else + { + *us1Count += ubRl; +- // 1 1 1 0 ++ /* 1 1 1 0*/ + if (!ubLastBit) + { + lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth); +@@ -1018,16 +1088,16 @@ + *us1Count = 0; + *usDy = 0; + } +- // 1 1 1 1 ++ /* 1 1 1 1*/ + } + } +- // 0 X 1 X ++ /* 0 X 1 X*/ + else + { +- // 0 X 1 X ++ /* 0 X 1 X*/ + *usPosX01 = usBytePos + ubDx; + *us1Count += ubRl; +- // 0 X 1 0 ++ /* 0 X 1 0*/ + if (!ubLastBit) + { + lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth); +@@ -1035,11 +1105,11 @@ + *us1Count = 0; + *usDy = 0; + } +- // 0 X 1 1 ++ /* 0 X 1 1*/ + } + + return(lScanSize); +-} // end of GetSimpleScan() ++} /* end of GetSimpleScan() */ + + + long scan_map (unsigned char *in_buf, +@@ -1049,7 +1119,7 @@ + unsigned char ubMode) + { + unsigned int i, j, k; +- unsigned char ubPreBit, ubCrtByte;//, ubLastBit; ++ unsigned char ubPreBit, ubCrtByte;/*, ubLastBit;*/ + long lScanSize, lTmp; + long lCrtSize; + unsigned short us1Count; +@@ -1078,7 +1148,7 @@ + switch (ubCrtByte) + { + case 0x00: +- // 1 0 ++ /* 1 0 */ + if (ubPreBit) + { + lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth); +@@ -1088,16 +1158,16 @@ + us1Count = 0; + usDy = 0; + } +- // 0 0 ++ /* 0 0*/ + break; + + case 0xff: +- // 1 1 ++ /* 1 1*/ + if (ubPreBit) + { + us1Count += 8; + } +- // 0 1 ++ /* 0 1*/ + else + { + us1Count = 8; +@@ -1106,7 +1176,7 @@ + break; + + default: +- // X X 1 X ++ /* X X 1 X*/ + if (gdi_ScanTbl[ubCrtByte].ubRl) + { + usBytePos = (j << 3); +@@ -1114,7 +1184,7 @@ + out_buf = out_buf + lTmp; + lScanSize += lTmp; + } +- // complex pattern ++ /* complex pattern*/ + else + { + for (k = 0; k < 2; k++) +@@ -1124,7 +1194,7 @@ + switch (ubTemp) + { + case 0x00: +- // 1 0 ++ /* 1 0*/ + if (ubPreBit) + { + lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth); +@@ -1134,16 +1204,16 @@ + us1Count = 0; + usDy = 0; + } +- // 0 0 ++ /* 0 0*/ + break; + + case 0x0f: +- // 1 1 ++ /* 1 1*/ + if (ubPreBit) + { + us1Count += 4; + } +- // 0 1 ++ /* 0 1*/ + else + { + us1Count = 4; +@@ -1152,7 +1222,7 @@ + break; + + case 0x05: +- // 1 0101 ++ /* 1 0101*/ + if (ubPreBit) + { + lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth); +@@ -1162,13 +1232,13 @@ + usPosX10 = usBytePos - us1Count; + usDy = 0; + } +- // 0 0101 ++ /* 0 0101*/ + usPosX01 = usBytePos + 1; + lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, usDy, usPosX10, usPosX01, usWidth); + out_buf = out_buf + lTmp; + lScanSize += lTmp; + +- // next ++ /* next*/ + usPosX10 = 0; + usPosX01 = 2; + usDy = 0; +@@ -1176,12 +1246,12 @@ + break; + + case 0x09: +- // 1 1001 ++ /* 1 1001*/ + if (ubPreBit) + { + us1Count++; + } +- // 0 1001 ++ /* 0 1001*/ + else + { + usPosX01 = usBytePos; +@@ -1191,7 +1261,7 @@ + out_buf = out_buf + lTmp; + lScanSize += lTmp; + +- // next ++ /* next*/ + if (ubPreBit) + { + usPosX10 = usBytePos - us1Count + 1; +@@ -1207,12 +1277,12 @@ + break; + + case 0x0a: +- // 1 1010 ++ /* 1 1010*/ + if (ubPreBit) + { + us1Count++; + } +- // 0 1010 ++ /* 0 1010*/ + else + { + us1Count = 1; +@@ -1222,25 +1292,25 @@ + out_buf = out_buf + lTmp; + lScanSize += lTmp; + +- // next ++ /* next*/ + usPosX10 = usBytePos - us1Count + 1; + usPosX01 = usBytePos + 2; + lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, 0, usPosX10, usPosX01, usWidth); + out_buf = out_buf + lTmp; + lScanSize += lTmp; +- // next ++ /* next*/ + usPosX10 = usBytePos + 2; + usDy = 0; + us1Count = 0; + break; + + case 0x0b: +- // 1 1011 ++ /* 1 1011*/ + if (ubPreBit) + { + us1Count++; + } +- // 0 1011 ++ /* 0 1011*/ + else + { + us1Count = 1; +@@ -1250,7 +1320,7 @@ + out_buf = out_buf + lTmp; + lScanSize += lTmp; + +- // next ++ /* next*/ + if (ubPreBit) + { + usPosX10 = usBytePos - us1Count + 1; +@@ -1267,12 +1337,12 @@ + break; + + case 0x0d: +- // 1 1101 ++ /* 1 1101*/ + if (ubPreBit) + { + us1Count += 2; + } +- // 0 1101 ++ /* 0 1101*/ + else + { + us1Count = 2; +@@ -1282,7 +1352,7 @@ + out_buf = out_buf + lTmp; + lScanSize += lTmp; + +- // next ++ /* next*/ + if (ubPreBit) + { + usPosX10 = usBytePos - us1Count + 2; +@@ -1298,17 +1368,17 @@ + break; + + default: +- // X X 1 X ++ /* X X 1 X*/ + lTmp = GetSimpleScan(out_buf, ubSizeMode, &us1Count, &usDy, &usPosX10, &usPosX01, usBytePos, ubTemp, 4, ubPreBit, usWidth); + out_buf = out_buf + lTmp; + lScanSize += lTmp; + break; +- } // end of switch() ++ } /* end of switch()*/ + ubPreBit = ubTemp & 0x01; +- } // end of k-loop ++ } /* end of k-loop*/ + } + break; +- } // end of switch() ++ } /* end of switch()*/ + + ubPreBit = ubCrtByte & 0x01; + } /*for usWidth */ +@@ -1326,7 +1396,7 @@ + } + usDy++; + +- // check size over ++ /* check size over*/ + if ( (i % 5) == 4 ) + { + lCrtSize = (long)((long)usWidth * (long)(i + 1)); +@@ -1342,7 +1412,7 @@ + lScanSize = -1; + } + return(lScanSize); +-} // end of scan_map() ++} /* end of scan_map() */ + + /***************************************************************** + * H : bmp2run +@@ -1362,7 +1432,7 @@ + unsigned char *tmp_buf1, *tmp_buf2; + long scan_size; + +- //return(-1); // 19990323 by bglee - request from SM Lee ++ /*return(-1);*/ /* 19990323 by bglee - request from SM Lee*/ + + tmp_buf1 = in_buf; + tmp_buf2 = out_buf; +@@ -1372,7 +1442,7 @@ + return(-1); + } + +- if ( !(ubMode & 0x02) ) // real compression //--- ++ if ( !(ubMode & 0x02) ) /* real compression */ + { + out_buf = tmp_buf2 + scan_size; + *out_buf++ = 0x00; +@@ -1385,7 +1455,7 @@ + scan_size += 2; + } + } +- else // pre-compression ++ else /* pre-compression*/ + { + scan_size += 2; + if (scan_size % 4) diff --git a/print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak b/print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak new file mode 100644 index 000000000000..3b832daff662 --- /dev/null +++ b/print/ghostscript-afpl/files/patch-src:smartgdi-contrib.mak @@ -0,0 +1,16 @@ +--- src/smartgdi-contrib.mak.orig Wed Jun 19 21:43:43 2002 ++++ src/smartgdi-contrib.mak Mon Jul 21 13:59:00 2003 +@@ -3,10 +3,12 @@ + ### Note : this driver is used by Samsung SmartGDI compatible printers. ### + ### + ++gdi_opts=-DGS_VERSION_MAJOR=$(GS_VERSION_MAJOR) ++ + GDIMONO=$(GLOBJ)gdevgdi.$(OBJ) $(HPPCL) + + $(DD)gdi.dev: $(GDIMONO) $(DD)page.dev + $(SETPDEV) $(DD)gdi $(GDIMONO) + + $(GLOBJ)gdevgdi.$(OBJ): $(GLSRC)gdevgdi.c $(PDEVH) $(gdevpcl_h) +- $(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(GLSRC)gdevgdi.c ++ $(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(gdi_opts) $(GLSRC)gdevgdi.c |