new ghostscript 6.01 port after repository copy

additional changes by me:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
    printer: Epson Stylus Color 740
    mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
    mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
    mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
    contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
    #
    printer: Epson LQ-1170
    mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
    mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
    mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
    contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
  release
- apsfilter will be updated later

Submitted by:   "Alec Wolman" <wolman@cs.washington.edu>

9 files changed, 277 insertions, 87 deletions

diff --git a/print/ghostscript8/files/lqx70ch.upp b/print/ghostscript8/files/lqx70ch.upp
new file mode 100644
index 000000000000..98f5dba15b83
--- /dev/null
+++ b/print/ghostscript8/files/lqx70ch.upp
@@ -0,0 +1,24 @@
+-supModel="Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/ErrorDiffusion
+-dupOutputFormat=/EscP2
+-r360x360
+-dupMargins="{ 9.0 0.0 9.0 24.0}"
+-dupOutputPins=24
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2869 0100 01
+   1b2855 0100 0A
+   1b5501
+   1b2865 0200 0002
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupEndPageCommand="(\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+
diff --git a/print/ghostscript8/files/lqx70cl.upp b/print/ghostscript8/files/lqx70cl.upp
new file mode 100644
index 000000000000..8bacfab8f294
--- /dev/null
+++ b/print/ghostscript8/files/lqx70cl.upp
@@ -0,0 +1,24 @@
+-supModel="Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/ErrorDiffusion
+-dupOutputFormat=/EscP2
+-r180x180
+-dupMargins="{ 9.0 0.0 9.0 24.0}"
+-dupOutputPins=24
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2869 0100 01
+   1b2855 0100 14
+   1b5500
+   1b2865 0200 0002
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupEndPageCommand="(\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+
diff --git a/print/ghostscript8/files/lqx70cm.upp b/print/ghostscript8/files/lqx70cm.upp
new file mode 100644
index 000000000000..4b1b95c06e93
--- /dev/null
+++ b/print/ghostscript8/files/lqx70cm.upp
@@ -0,0 +1,23 @@
+-supModel="Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/ErrorDiffusion
+-dupOutputFormat=/EscP2
+-r360x180
+-dupMargins="{ 9.0 24.0 9.0 24.0}"
+-dupOutputPins=24
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2869 0100 01
+   1b2855 0100 14
+   1b5500
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupEndPageCommand="(\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+
diff --git a/print/ghostscript8/files/patch-aa b/print/ghostscript8/files/patch-aa
index 65a3e92356bb..97843d547d91 100644
--- a/print/ghostscript8/files/patch-aa
+++ b/print/ghostscript8/files/patch-aa
@@ -1,11 +1,10 @@
---- unix-gcc.mak.orig	Thu Sep 17 08:06:06 1998
-+++ unix-gcc.mak	Mon Nov 30 13:11:05 1998
-@@ -48,12 +48,10 @@
+--- src/unix-gcc.mak.orig	Fri Mar 17 20:13:40 2000
++++ src/unix-gcc.mak	Tue Mar 21 01:03:57 2000
+@@ -52,11 +52,10 @@
  # the directories also define the default search path for the
  # initialization files (gs_*.ps) and the fonts.
  
--# If your system has installbsd, change install to installbsd in the next line.
--INSTALL = install -c
+-INSTALL = $(GLSRCDIR)/instcopy -c
 -INSTALL_PROGRAM = $(INSTALL) -m 755
 -INSTALL_DATA = $(INSTALL) -m 644
 +INSTALL_PROGRAM = $(BSD_INSTALL_SCRIPT)
@@ -16,7 +15,7 @@
  exec_prefix = $(prefix)
  bindir = $(exec_prefix)/bin
  scriptdir = $(bindir)
-@@ -141,7 +139,7 @@
+@@ -153,7 +152,7 @@
  # what its name is.
  # See gs.mak and Make.htm for more information.
  
@@ -25,7 +24,7 @@
  LIBPNG_NAME=png
  
  # Define the directory where the zlib sources are stored.
-@@ -153,7 +151,7 @@
+@@ -165,7 +164,7 @@
  # what its name is (usually libz, but sometimes libgz).
  # See gs.mak and Make.htm for more information.
  
@@ -34,7 +33,7 @@
  #ZLIB_NAME=gz
  ZLIB_NAME=z
  
-@@ -172,7 +170,7 @@
+@@ -180,7 +179,7 @@
  
  # Define the name of the C compiler.
  
@@ -43,7 +42,7 @@
  
  # Define the name of the linker for the final link step.
  # Normally this is the same as the C compiler.
-@@ -205,7 +203,7 @@
+@@ -213,7 +212,7 @@
  #   gcc to accept ANSI-style function prototypes and function definitions.
  XCFLAGS=
  
@@ -52,7 +51,7 @@
  
  # Define platform flags for ld.
  # SunOS 4.n may need -Bstatic.
-@@ -214,7 +212,7 @@
+@@ -222,7 +221,7 @@
  #	-R /usr/local/xxx/lib:/usr/local/lib
  # giving the full path names of the shared library directories.
  # XLDFLAGS can be set from the command line.
@@ -61,7 +60,16 @@
  
  LDFLAGS=$(XLDFLAGS) -fno-common
  
-@@ -234,7 +232,7 @@
+@@ -242,7 +241,7 @@
+ # All reasonable platforms require -lm, but Rhapsody and perhaps one or
+ # two others fold libm into libc and don't require any additional library.
+ 
+-STDLIBS=-lpthread -lm
++STDLIBS= -lm
+ 
+ # Define the include switch(es) for the X11 header files.
+ # This can be null if handled in some other way (e.g., the files are
+@@ -252,7 +251,7 @@
  # Note that x_.h expects to find the header files in $(XINCLUDE)/X11,
  # not in $(XINCLUDE).
  
@@ -70,7 +78,7 @@
  
  # Define the directory/ies and library names for the X11 library files.
  # XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
-@@ -246,12 +244,12 @@
+@@ -264,12 +263,12 @@
  # Solaris and other SVR4 systems with dynamic linking probably want
  #XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
  # X11R6 (on any platform) may need
@@ -82,61 +90,81 @@
 +XLIBDIRS=-L$(X11BASE)/lib
  XLIBDIR=
 -XLIBS=Xt Xext X11
-+#XLIBS=Xt X11
++#XLIBS=Xt Xext X11
  
  # Define whether this platform has floating point hardware:
  #	FPU_TYPE=2 means floating point is faster than fixed point.
-@@ -292,27 +290,6 @@
- 
- FILE_IMPLEMENTATION=stdio
- 
--# Choose the device(s) to include.  See devs.mak for details,
--# devs.mak and contrib.mak for the list of available devices.
--
--DEVICE_DEVS=x11.dev x11alpha.dev x11cmyk.dev x11gray2.dev x11gray4.dev x11mono.dev
--#DEVICE_DEVS1=bmpmono.dev bmpamono.dev posync.dev
--DEVICE_DEVS1=
--DEVICE_DEVS2=
--DEVICE_DEVS3=deskjet.dev djet500.dev laserjet.dev ljetplus.dev ljet2p.dev ljet3.dev ljet4.dev
--DEVICE_DEVS4=cdeskjet.dev cdjcolor.dev cdjmono.dev cdj550.dev pj.dev pjxl.dev pjxl300.dev
--DEVICE_DEVS5=uniprint.dev
--DEVICE_DEVS6=bj10e.dev bj200.dev bjc600.dev bjc800.dev
--DEVICE_DEVS7=faxg3.dev faxg32d.dev faxg4.dev
--DEVICE_DEVS8=pcxmono.dev pcxgray.dev pcx16.dev pcx256.dev pcx24b.dev pcxcmyk.dev
--DEVICE_DEVS9=pbm.dev pbmraw.dev pgm.dev pgmraw.dev pgnm.dev pgnmraw.dev pnm.dev pnmraw.dev ppm.dev ppmraw.dev pkm.dev pkmraw.dev
--DEVICE_DEVS10=tiffcrle.dev tiffg3.dev tiffg32d.dev tiffg4.dev tifflzw.dev tiffpack.dev
--DEVICE_DEVS11=tiff12nc.dev tiff24nc.dev
--DEVICE_DEVS12=psmono.dev psgray.dev psrgb.dev bit.dev bitrgb.dev bitcmyk.dev
--DEVICE_DEVS13=pngmono.dev pnggray.dev png16.dev png256.dev png16m.dev
--DEVICE_DEVS14=jpeg.dev jpeggray.dev
--DEVICE_DEVS15=pdfwrite.dev pswrite.dev epswrite.dev pxlmono.dev pxlcolor.dev
+@@ -345,27 +344,27 @@
+ #DEVICE_DEVS14=
+ #DEVICE_DEVS15=
+ 
+-DEVICE_DEVS1=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)bmp32b.dev
+-DEVICE_DEVS2=$(DD)bmpamono.dev $(DD)bmpasep1.dev $(DD)bmpasep8.dev $(DD)bmpa16.dev $(DD)bmpa256.dev $(DD)bmpa16m.dev $(DD)bmpa32b.dev
+-DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lj5mono.dev $(DD)lj5gray.dev
+-DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
+-DEVICE_DEVS5=$(DD)uniprint.dev
+-DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
+-DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
+-DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
+-DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
+-DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
+-DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev
+-DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
+-DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev
+-DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
+-DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
 -
- # ---------------------------- End of options --------------------------- #
+-DEVICE_DEVS16=
+-DEVICE_DEVS17=
+-DEVICE_DEVS18=
+-DEVICE_DEVS19=
+-DEVICE_DEVS20=$(DD)cljet5.dev $(DD)cljet5c.dev
++#DEVICE_DEVS1=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)bmp32b.dev
++#DEVICE_DEVS2=$(DD)bmpamono.dev $(DD)bmpasep1.dev $(DD)bmpasep8.dev $(DD)bmpa16.dev $(DD)bmpa256.dev $(DD)bmpa16m.dev $(DD)bmpa32b.dev
++#DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lj5mono.dev $(DD)lj5gray.dev
++#DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
++#DEVICE_DEVS5=$(DD)uniprint.dev
++#DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
++#DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
++#DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
++#DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
++#DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
++#DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev
++#DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
++#DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev
++#DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
++#DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
++
++#DEVICE_DEVS16=
++#DEVICE_DEVS17=
++#DEVICE_DEVS18=
++#DEVICE_DEVS19=
++#DEVICE_DEVS20=$(DD)cljet5.dev $(DD)cljet5c.dev
  
- # Define the name of the partial makefile that specifies options --
-@@ -320,16 +297,10 @@
+ # ---------------------------- End of options --------------------------- #
  
- MAKEFILE=$(GLSRC)unix-gcc.mak
+@@ -379,13 +378,13 @@
+ # detect whether we're running a version of gcc with the const optimization
+ # bug.
  
--# Define the ANSI-to-K&R dependency.  There isn't one, but we do have to
--# detect whether we're running a version of gcc with the const optimization
--# bug.
--
 -AK=$(GLGENDIR)/cc.tr
--
++#AK=$(GLGENDIR)/cc.tr
+ 
  # Define the compilation rules and flags.
  
  CCFLAGS=$(GENOPT) $(CFLAGS)
 -CC_=$(CC) `cat $(AK)` $(CCFLAGS)
+-CCAUX=$(CC) `cat $(AK)`
 +CC_=$(CC) $(CCFLAGS)
- CCAUX=$(CC)
- #We can't use -fomit-frame-pointer with -pg....
- #CC_LEAF=$(CC_)
-@@ -350,7 +321,3 @@
- include $(GLSRC)unixtail.mak
- include $(GLSRC)unix-end.mak
- include $(GLSRC)unixinst.mak
--
--# This has to come last so it won't be taken as the default target.
++CCAUX=$(CC)
+ CC_LEAF=$(CC_) -fomit-frame-pointer
+ # gcc can't use -fomit-frame-pointer with -pg.
+ CC_LEAF_PG=$(CC_)
+@@ -412,5 +411,5 @@
+ include $(GLSRCDIR)/unixinst.mak
+ 
+ # This has to come last so it won't be taken as the default target.
 -$(AK):
--	if ( gcc --version | grep "2.7.[01]" >/dev/null || test `gcc --version` = 2.7.2 ); then echo -Dconst= >$(AK); else echo -Wcast-qual -Wwrite-strings >$(AK); fi
+-	if ( $(CC) --version | egrep "^2\.7\.([01]|2(\.[^1-9]|$$))" >/dev/null ); then echo -Dconst= >$(AK); else echo -Wcast-qual -Wwrite-strings >$(AK); fi
++#$(AK):
++#	if ( $(CC) --version | egrep "^2\.7\.([01]|2(\.[^1-9]|$$))" >/dev/null ); then echo -Dconst= >$(AK); else echo -Wcast-qual -Wwrite-strings >$(AK); fi
diff --git a/print/ghostscript8/files/patch-ab b/print/ghostscript8/files/patch-ab
deleted file mode 100644
index aee04b39d512..000000000000
--- a/print/ghostscript8/files/patch-ab
+++ /dev/null
@@ -1,10 +0,0 @@
---- gs_init.ps.orig	Thu Jan  2 19:23:13 1997
-+++ gs_init.ps	Thu Jan  2 19:24:46 1997
-@@ -1363,3 +1363,7 @@
- (END GC) VMDEBUG
- 
- % The interpreter will run the initial procedure (start).
-+
-+% unofficial patch:
-+% make it possible to print from within acroread pdf viewer
-+/Default currenthalftone /Halftone defineresource pop
diff --git a/print/ghostscript8/files/patch-ac b/print/ghostscript8/files/patch-ac
deleted file mode 100644
index ebd487b9fa66..000000000000
--- a/print/ghostscript8/files/patch-ac
+++ /dev/null
@@ -1,21 +0,0 @@
---- contrib.mak.orig	Tue Sep 15 04:03:52 1998
-+++ contrib.mak	Tue Dec  1 15:37:58 1998
-@@ -435,6 +435,18 @@
- cdj850.dev: $(cdeskjet8_) page.dev
- 	$(SETPDEV) cdj850 $(cdeskjet8_)
- 
-+cdj670.dev: $(cdeskjet8_) page.dev
-+	$(SETPDEV) cdj670 $(cdeskjet8_)
-+
-+cdj890.dev: $(cdeskjet8_) page.dev
-+	$(SETPDEV) cdj890 $(cdeskjet8_)
-+
-+cdj1600.dev: $(cdeskjet8_) page.dev
-+	$(SETPDEV) cdj1600 $(cdeskjet8_)
-+
-+$(GLOBJ)gdevcd8.$(OBJ): $(GLSRC)gdevcd8.c $(GLSRC)gdevcd8.h $(PDEVH)
-+	$(GLCC) $(GLO_)gdevcd8.$(OBJ) $(C_) $(GLSRC)gdevcd8.c
-+
- ### ------------ The H-P PaintJet color printer device ----------------- ###
- ### Note: this driver also supports the DEC LJ250 color printer, which   ###
- ###       has a PaintJet-compatible mode, and the PaintJet XL.           ###
diff --git a/print/ghostscript8/files/stc740ih.upp b/print/ghostscript8/files/stc740ih.upp
new file mode 100644
index 000000000000..1023b5eb96c8
--- /dev/null
+++ b/print/ghostscript8/files/stc740ih.upp
@@ -0,0 +1,58 @@
+-supModel="Epson Stylus Color 740, 1440x720DpI, Inkjet Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/FSCMYK32
+-dupOutputFormat=/EscP2XY
+-r1440x720
+-dupMargins="{ 9.0 39.96 9.0 9.0}"
+-dupBlackTransfer="{
+ 0.00000000 0.00627451 0.01254902 0.02196078 0.02980392 0.03764706 0.04549020
+ 0.05490196 0.06431373 0.07215686 0.08156863 0.09098039 0.10196078 0.11450980
+ 0.12862745 0.14588235 0.16313725 0.18509804 0.20862745 0.25411765 0.40000000
+}"
+-dupCyanTransfer="{
+ 0.00000000 0.00627451 0.01254902 0.02196078 0.02980392 0.03764706 0.04549020
+ 0.05490196 0.06431373 0.07215686 0.08156863 0.09098039 0.10196078 0.11450980
+ 0.12862745 0.14588235 0.16313725 0.18509804 0.20862745 0.25411765 0.40000000
+}"
+-dupMagentaTransfer="{
+ 0.00000000 0.00627451 0.01254902 0.02196078 0.02980392 0.03764706 0.04549020
+ 0.05490196 0.06431373 0.07215686 0.08156863 0.09098039 0.10196078 0.11450980
+ 0.12862745 0.14588235 0.16313725 0.18509804 0.20862745 0.25411765 0.40000000
+}"
+-dupYellowTransfer="{
+ 0.00000000 0.00627451 0.01254902 0.02196078 0.02980392 0.03764706 0.04549020
+ 0.05490196 0.06431373 0.07215686 0.08156863 0.09098039 0.10196078 0.11450980
+ 0.12862745 0.14588235 0.16313725 0.18509804 0.20862745 0.25411765 0.40000000
+}"
+-dupOutputComponentOrder="{ 1 2 3 0 }"
+-dupWeaveXPasses=2
+-dupOutputXStep=2
+-dupWeaveYPasses=6
+-dupOutputPins=46
+-dupWeaveYFeeds="{23 23 23 23 23 23 23 23 23 23 23 23}"
+-dupWeaveXStarts="{0  1  0  1  0  1  1  0  1  0  1  0}"
+-dupWeaveYOffset=50
+-dupWeaveInitialYFeeds="{ 5  5  5  5  5  5  5  5  5  5  5 23}"
+-dupWeaveInitialXStarts="{0  1  0  1  0  1  1  0  1  0  1  0}"
+-dupWeaveInitialPins="{ 13 16 19 22 25 28 31 34 37 40 43 46}"
+-dupFormatYabsolute
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2855 0100 05
+   1b2873 0100 02
+   1b5501
+   1b2865 0200 0001
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupAdjustTopMarginCommand
+-dupAdjustBottomMarginCommand
+-dupXStepCommand="<1b285c 0400 a005 0100 0000>"
+-dupEndPageCommand="(\033@\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+
diff --git a/print/ghostscript8/files/stc740p.upp b/print/ghostscript8/files/stc740p.upp
new file mode 100644
index 000000000000..d59bf0d170d2
--- /dev/null
+++ b/print/ghostscript8/files/stc740p.upp
@@ -0,0 +1,34 @@
+-supModel="Epson Stylus Color 740, 720x720DpI, Plain Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/FSCMYK32
+-dupOutputFormat=/EscP2
+-r720x720
+-dupMargins="{ 9.0 39.96 9.0 9.0}"
+-dupBlackTransfer="{   0.0000 0.0453 0.1058 0.1898 0.4321 1.0000 }"
+-dupCyanTransfer="{    0.0000 0.0453 0.1058 0.1898 0.4321 1.0000 }"
+-dupMagentaTransfer="{ 0.0000 0.0453 0.1058 0.1898 0.4321 1.0000 }"
+-dupYellowTransfer="{  0.0000 0.0453 0.1058 0.1898 0.4321 1.0000 }"
+-dupOutputComponentOrder="{ 1 2 3 0 }"
+-dupWeaveYPasses=6
+-dupOutputPins=48
+-dupWeaveYFeeds="{47 47 47 53 47 47}"
+-dupWeaveInitialYFeeds="{1  1  1  1  1  43}"
+-dupWeaveInitialPins="{ 8 48 40 31 23 15}"
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2855 0100 05
+   1b5500
+   1b2865 0200 0002
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupAdjustTopMarginCommand
+-dupAdjustBottomMarginCommand
+-dupEndPageCommand="(\033@\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+
diff --git a/print/ghostscript8/files/stc740pl.upp b/print/ghostscript8/files/stc740pl.upp
new file mode 100644
index 000000000000..9ec72d93a773
--- /dev/null
+++ b/print/ghostscript8/files/stc740pl.upp
@@ -0,0 +1,30 @@
+-supModel="Epson Stylus Color 740, 360x360DpI, Plain Paper"
+-sDEVICE=uniprint
+-dNOPAUSE
+-dSAFER
+-dupColorModel=/DeviceCMYKgenerate
+-dupRendering=/FSCMYK32
+-dupOutputFormat=/EscP2
+-r360x360
+-dupMargins="{ 9.0 39.96 9.0 9.0}"
+-dupOutputComponentOrder="{ 1 2 3 0 }"
+-dupWeaveYPasses=3
+-dupOutputPins=48
+-dupWeaveYFeeds="{47 50 47}"
+-dupWeaveInitialYFeeds="{1 1 46}"
+-dupWeaveInitialPins="{ 16 48 32}"
+-dupBeginPageCommand="<
+   1b40   1b40
+   1b2847 0100 01
+   1b2855 0100 0A
+   1b5500
+   1b2865 0200 0002
+   1b2843 0200 0000
+   1b2863 0400 0000 0000
+>"
+-dupAdjustPageLengthCommand
+-dupAdjustTopMarginCommand
+-dupAdjustBottomMarginCommand
+-dupEndPageCommand="(\033@\014)"
+-dupAbortCommand="(\033@\15\12\12\12\12    Printout-Aborted\15\014)"
+