- Fix build problem on !i386 platforms[1].

- Use --with-{ijs,jasper} instead of running each configure script.
- Make descriptions of OPTIONS shorter than 70 chars wide.
- Add "display" (GS_display) device[2].

Reported by:	pointyhat[1],
Requested by:	Sascha Blank (blank dot sascha at googlemail dot com)[2]

8 files changed, 426 insertions, 45190 deletions

diff --git a/print/ghostscript-gpl/Makefile b/print/ghostscript-gpl/Makefile
index f8ba951bbf2a..a77c83e0a339 100644
--- a/print/ghostscript-gpl/Makefile
+++ b/print/ghostscript-gpl/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	ghostscript
 PORTVERSION=	8.62
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${PORTVERSION:S/.//}/:gs_srcs \
@@ -41,7 +41,10 @@ CONFIGURE_ENV=	${MAKE_ENV} \
 		CPPFLAGS="-DUPD_SIGNAL=0 -I. -I${WRKSRC}/jasper/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include" \
 		LDFLAGS="-L${LOCALBASE}/lib"
 CONFIGURE_ARGS=	--disable-compile-inits \
-		--enable-contrib
+		--enable-contrib \
+		--enable-dynamic \
+		--with-ijs \
+		--with-jasper
 XCFLAGS=	${PTHREAD_CFLAGS}
 XLDFLAGS=	${PTHREAD_LIBS}
 
@@ -211,18 +214,6 @@ post-patch:
 		 s|%%GS_VERSION%%|${PORTVERSION}|g' \
 			${WRKSRC}/contrib/japanese/dmp_site.ps
 
-pre-configure:
-	${TOUCH} ${WRKSRC}/ijs/config.guess
-	cd ${WRKSRC}/expat/conftools && ${INSTALL_SCRIPT} \
-		ltmain.sh mkinstalldirs install-sh config.sub \
-		${WRKSRC}/ijs
-
-post-configure:
-	cd ${WRKSRC}/jasper && \
-		${SETENV} ${CONFIGURE_ENV} ${SH} ./configure --prefix=${PREFIX}
-	cd ${WRKSRC}/ijs && \
-		${SETENV} ${CONFIGURE_ENV} ${SH} ./configure --prefix=${PREFIX}
-
 pre-build-drivers.mak:
 	@${ECHO_CMD} 'DEVICE_DEVS= \' > ${WRKSRC}/src/drivers.mak
 .for D in ${OPTIONS:MGS_*:S/^GS_//}
diff --git a/print/ghostscript-gpl/Makefile.drivers b/print/ghostscript-gpl/Makefile.drivers
index 8f7e364cb94a..6e82ae0d7c7a 100644
--- a/print/ghostscript-gpl/Makefile.drivers
+++ b/print/ghostscript-gpl/Makefile.drivers
@@ -19,9 +19,9 @@ OPTIONS_ICONV_DEFAULT=	off
 .endif
 
 OPTIONS_X11= \
-GS_x11	"D: X Window System version 11, release >=4"	${OPTIONS_X11_DEFAULT} \
+GS_x11		"D: X Window System version 11, release >=4"	${OPTIONS_X11_DEFAULT} \
 GS_x11alpha	"D: X Window System masquer. alpha capability"	${OPTIONS_X11_DEFAULT} \
-GS_x11cmyk	"D: X Window System masquer. 1-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
+GS_x11cmyk	"D: X Window System masquer. 1bit/plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk2	"D: X Window System 2-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk4	"D: X Window System 4-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk8	"D: X Window System 8-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
@@ -36,199 +36,200 @@ GS_lvga256	"D: SVGAlib, 256-color VGA modes"	${OPTIONS_SVGALIB_DEFAULT} \
 GS_vgalib	"D: SVGAlib, 16-color VGA modes"	${OPTIONS_SVGALIB_DEFAULT}
 
 OPTIONS_ICONV= \
-GS_oprp	"D: OpenPrinting Raster printer driver interface [contr]"	${OPTIONS_ICONV_DEFAULT} \
-GS_opvp	"D: OpenPrinting Vecter printer driver interface [contr]"	${OPTIONS_ICONV_DEFAULT}
+GS_oprp		"D: OpenPrinting Raster driver interface"	${OPTIONS_ICONV_DEFAULT} \
+GS_opvp		"D: OpenPrinting Vecter driver interface"	${OPTIONS_ICONV_DEFAULT}
 
 OPTIONS+=	${OPTIONS_X11}
 OPTIONS+=	${OPTIONS_SVGALIB}
 OPTIONS+=	${OPTIONS_ICONV}
 
 OPTIONS+=	\
-GS_md2k	"D: ALPS MD-2000/2010/4000/1300/1500/5000 [contr]"	on \
-GS_md5k	"D: ALPS MD-5000 Eco Mode [contr]"	on \
-GS_md50Mono	"D: ALPS MD-5000 Monochrome [contr]"	on \
-GS_md50Eco	"D: ALPS MD-5000 Eco Mode [contr]"	on \
-GS_md1xMono	"D: ALPS MD-1x00 Monochrome [contr]"	on \
-GS_appledmp	"D: Apple Dot Matrix Printer / Imagewriter"	on \
-GS_iwhi	"D: Apple Imagewriter, high-resolution mode"	on \
-GS_iwlo	"D: Apple Imagewriter, low-resolution mode"	on \
-GS_iwlq	"D: Apple Imagewriter LQ in 320 x 216 dpi mode"	on \
+GS_display	"D: display device for GS shared library"	on \
+GS_md2k		"D: ALPS MD-2000/2010/4000/1300/1500/5000"	on \
+GS_md5k		"D: ALPS MD-5000 Eco Mode"	on \
+GS_md50Mono	"D: ALPS MD-5000 Monochrome"	on \
+GS_md50Eco	"D: ALPS MD-5000 Eco Mode"	on \
+GS_md1xMono	"D: ALPS MD-1x00 Monochrome"	on \
+GS_appledmp	"D: Apple Dot Matrix Printer/Imagewriter"	on \
+GS_iwhi		"D: Apple Imagewriter, high-resolution mode"	on \
+GS_iwlo		"D: Apple Imagewriter, low-resolution mode"	on \
+GS_iwlq		"D: Apple Imagewriter LQ in 320x216dpi mode"	on \
 GS_hl7x0	"D: Brother HL-720/730/760(=PCL), MFC6550MC"	on \
-GS_hl1240	"D: Brother HL-1030/240 (600x600 dpi) [contr]"	on \
-GS_hl1250	"D: Brother HL-1050/1070/1250/1270N (1200x600 dpi) [contr]"	on \
+GS_hl1240	"D: Brother HL-1030/240 (600x600dpi)"	on \
+GS_hl1250	"D: Brother HL-1050/1070/1250/1270N (1200x600)"	on \
 GS_bj10e	"D: Canon BJ-10e"	on \
-GS_bj10v	"D: Canon BJ-10v [contr]"	on \
-GS_bj10vh	"D: Canon BJ-10v, high-mergin [contr]"	on \
-GS_bj200	"D: Canon BJ-200 and BJC-240(b&w)"	on \
-GS_bjc600	"D: Canon BJC-600/4xxx/70 + Apple StyleWriter 2x00"	on \
+GS_bj10v	"D: Canon BJ-10v"	on \
+GS_bj10vh	"D: Canon BJ-10v, high-mergin"	on \
+GS_bj200	"D: Canon BJ-200/BJC-240(mono)"	on \
+GS_bjc600	"D: Canon BJC-600/4xxx/70, StyleWriter 2x00"	on \
 GS_bjc800	"D: Canon BJC-240/800"	on \
-GS_bjccmyk	"D: Canon BJC-210/240/250/265/1000 [contr]"	on \
-GS_bjccolor	"D: Canon BJC-210/240/250/265/1000 truecolor [contr]"	on \
-GS_bjcgray	"D: Canon BJC-210/240/250/265/1000 grayscale [contr]"	on \
-GS_bjcmono	"D: Canon BJC-210/240/250/265/1000 monochrome [contr]"	on \
-GS_lbp8	"D: Canon LBP-8II laser printer"	on \
-GS_lbp310	"D: Canon LBP-310 [contr]"	on \
-GS_lbp320	"D: Canon LBP-320 Pro/LBP-350 [contr]"	on \
-GS_lips2p	"D: Canon LIPS II+ [contr]"	on \
-GS_lips3	"D: Canon LIPS III [contr]"	on \
-GS_lips4	"D: Canon LIPS IV [contr]"	on \
-GS_bjc880j	"D: Canon LIPS IVc (BJC-680J/880J) [contr]"	on \
-GS_lips4v	"D: Canon LIPS IV, vector output mode [contr]"	on \
+GS_bjccmyk	"D: Canon BJC-210/240/250/265/1000"	on \
+GS_bjccolor	"D: Canon BJC-210/240/250/265/1000 truecolor"	on \
+GS_bjcgray	"D: Canon BJC-210/240/250/265/1000 grayscale"	on \
+GS_bjcmono	"D: Canon BJC-210/240/250/265/1000 monochrome"	on \
+GS_lbp8		"D: Canon LBP-8II laser printer"	on \
+GS_lbp310	"D: Canon LBP-310"	on \
+GS_lbp320	"D: Canon LBP-320 Pro/LBP-350"	on \
+GS_lips2p	"D: Canon LIPS II+"	on \
+GS_lips3	"D: Canon LIPS III"	on \
+GS_lips4	"D: Canon LIPS IV"	on \
+GS_bjc880j	"D: Canon LIPS IVc, BJC-680J/880J"	on \
+GS_lips4v	"D: Canon LIPS IV, vector output mode"	on \
 GS_m8510	"D: C.Itoh M8510 printer"	on \
 GS_coslw2p	"D: CoStar LabelWriter II II/Plus"	on \
 GS_coslwxl	"D: CoStar LabelWriter XL"	on \
 GS_uniprint	"D: Configurable ESC/P,ESC/P2,HP-RTL/PCL,P2X"	on \
-GS_dmprt	"D: Configurable dot matrix printer driver [contr]"	on \
-GS_dl2100	"D: DEC DL2100 [contr]"	on \
-GS_la50	"D: DEC LA50 [contr]"	on \
-GS_la70	"D: DEC LA70 [contr]"	on \
-GS_la75	"D: DEC LA75 [contr]"	on \
-GS_la75plus	"D: DEC LA75+ [contr]"	on \
-GS_ln03	"D: DEC LN03 [contr]"	on \
+GS_dmprt	"D: Configurable dot matrix printer driver"	on \
+GS_dl2100	"D: DEC DL2100"	on \
+GS_la50		"D: DEC LA50"	on \
+GS_la70		"D: DEC LA70"	on \
+GS_la75		"D: DEC LA75"	on \
+GS_la75plus	"D: DEC LA75+"	on \
+GS_ln03		"D: DEC LN03"	on \
 GS_lj250	"D: DEC LJ250 Companion color printer"	on \
 GS_declj250	"D: DEC LJ250 driver (alternate)"	on \
 GS_ap3250	"D: Epson ActionPrinter 3250"	on \
 GS_epson	"D: Epson dot matrix, 9/24-pin"	on \
-GS_eps9mid	"D: Epson 9-pin, interleaved lines, medium resol"	on \
-GS_eps9high	"D: Epson 9-pin, interleaved lines, triple resol"	on \
+GS_eps9mid	"D: Epson 9-pin, interleaved lines, medium res"	on \
+GS_eps9high	"D: Epson 9-pin, interleaved lines, triple res"	on \
 GS_lp8000	"D: Epson LP-8000 line printer"	on \
-GS_epag	"D: Epson ESC/Page laser printer (generic)"	on \
-GS_escpage	"D: Epson ESC/Page laser printer (generic) [contr]"	on \
-GS_lp2000	"D: Epson LP-2000/3000/7000/7000G laser printer [contr]"	on \
-GS_alc8600	"D: Epson AL-C8600 color laser printer [contr]"	on \
-GS_alc8500	"D: Epson AL-C8500 color laser printer [contr]"	on \
-GS_alc2000	"D: Epson AL-C2000 color laser printer [contr]"	on \
-GS_alc4000	"D: Epson AL-C4000 color laser printer [contr]"	on \
-GS_alc1900	"D: Epson AL-C1900 color laser printer [contr]"	on \
-GS_alc4100	"D: Epson AL-C4100 color laser printer [contr]"	on \
-GS_lp9800c	"D: Epson LP-9800C color laser printer [contr]"	on \
-GS_lp9000c	"D: Epson LP-9000C color laser printer [contr]"	on \
-GS_lp9500c	"D: Epson LP-9500C color laser printer [contr]"	on \
-GS_lp8800c	"D: Epson LP-8800C color laser printer [contr]"	on \
-GS_lp8300c	"D: Epson LP-8300C color laser printer [contr]"	on \
-GS_lp8500c	"D: Epson LP-8500C color laser printer [contr]"	on \
-GS_lp3000c	"D: Epson LP-3000C color laser printer [contr]"	on \
-GS_lp8200c	"D: Epson LP-8200C color laser printer [contr]"	on \
-GS_lp8000c	"D: Epson LP-8000C color laser printer [contr]"	on \
-GS_epl6100	"D: Epson EPL-6100 laser printer [contr]"	on \
-GS_epl5900	"D: Epson EPL-5900 laser printer [contr]"	on \
-GS_epl5800	"D: Epson EPL-5800 laser printer [contr]"	on \
-GS_epl2050	"D: Epson EPL-N2050 laser printer [contr]"	on \
-GS_epl2050p	"D: Epson EPL-N2050+ laser printer [contr]"	on \
-GS_epl2120	"D: Epson EPL-N2120 laser printer [contr]"	on \
-GS_epl2500	"D: Epson EPL-N2500 laser printer [contr]"	on \
-GS_epl2750	"D: Epson EPL-N2750 laser printer [contr]"	on \
-GS_lp9000b	"D: Epson LP-9000B laser printer [contr]"	on \
-GS_lp2500	"D: Epson LP-2500 laser printer [contr]"	on \
-GS_lp9100	"D: Epson LP-9100(R) laser printer [contr]"	on \
-GS_lp7900	"D: Epson LP-7900(R) laser printer [contr]"	on \
-GS_lp7500	"D: Epson LP-7500(R) laser printer [contr]"	on \
-GS_lp2400	"D: Epson LP-2400 laser printer [contr]"	on \
-GS_lp2200	"D: Epson LP-2200 laser printer [contr]"	on \
-GS_lp9400	"D: Epson LP-9400(R) laser printer [contr]"	on \
-GS_lp8900	"D: Epson LP-8900(R) laser printer [contr]"	on \
-GS_lp8700	"D: Epson LP-8700(R) laser printer [contr]"	on \
-GS_lp8100	"D: Epson LP-8100(R) laser printer [contr]"	on \
-GS_lp7700	"D: Epson LP-7700(R) laser printer [contr]"	on \
-GS_lp8600f	"D: Epson LP-8600FX(N) laser printer [contr]"	on \
-GS_lp8400f	"D: Epson LP-8400FX(N) laser printer [contr]"	on \
-GS_lp8300f	"D: Epson LP-8300F laser printer [contr]"	on \
-GS_lp1900	"D: Epson LP-1900(N) laser printer [contr]"	on \
-GS_lp9600s	"D: Epson LP-9600S laser printer [contr]"	on \
-GS_lp9300	"D: Epson LP-9300 laser printer [contr]"	on \
-GS_lp9600	"D: Epson LP-9600 laser printer [contr]"	on \
-GS_lp8600	"D: Epson LP-8600FX(N) laser printer [contr]"	on \
-GS_lp1800	"D: Epson LP-1800 laser printer [contr]"	on \
-GS_lq850	"D: Epson LQ-850 (360x360) (emul on Canon BJ300)"	on \
+GS_epag		"D: Epson ESC/Page laser printer (generic)"	on \
+GS_escpage	"D: Epson ESC/Page laser printer (generic)"	on \
+GS_lp2000	"D: Epson LP-2000/3000/7000/7000G laser printer"	on \
+GS_alc8600	"D: Epson AL-C8600 color laser printer"	on \
+GS_alc8500	"D: Epson AL-C8500 color laser printer"	on \
+GS_alc2000	"D: Epson AL-C2000 color laser printer"	on \
+GS_alc4000	"D: Epson AL-C4000 color laser printer"	on \
+GS_alc1900	"D: Epson AL-C1900 color laser printer"	on \
+GS_alc4100	"D: Epson AL-C4100 color laser printer"	on \
+GS_lp9800c	"D: Epson LP-9800C color laser printer"	on \
+GS_lp9000c	"D: Epson LP-9000C color laser printer"	on \
+GS_lp9500c	"D: Epson LP-9500C color laser printer"	on \
+GS_lp8800c	"D: Epson LP-8800C color laser printer"	on \
+GS_lp8300c	"D: Epson LP-8300C color laser printer"	on \
+GS_lp8500c	"D: Epson LP-8500C color laser printer"	on \
+GS_lp3000c	"D: Epson LP-3000C color laser printer"	on \
+GS_lp8200c	"D: Epson LP-8200C color laser printer"	on \
+GS_lp8000c	"D: Epson LP-8000C color laser printer"	on \
+GS_epl6100	"D: Epson EPL-6100 laser printer"	on \
+GS_epl5900	"D: Epson EPL-5900 laser printer"	on \
+GS_epl5800	"D: Epson EPL-5800 laser printer"	on \
+GS_epl2050	"D: Epson EPL-N2050 laser printer"	on \
+GS_epl2050p	"D: Epson EPL-N2050+ laser printer"	on \
+GS_epl2120	"D: Epson EPL-N2120 laser printer"	on \
+GS_epl2500	"D: Epson EPL-N2500 laser printer"	on \
+GS_epl2750	"D: Epson EPL-N2750 laser printer"	on \
+GS_lp9000b	"D: Epson LP-9000B laser printer"	on \
+GS_lp2500	"D: Epson LP-2500 laser printer"	on \
+GS_lp9100	"D: Epson LP-9100(R) laser printer"	on \
+GS_lp7900	"D: Epson LP-7900(R) laser printer"	on \
+GS_lp7500	"D: Epson LP-7500(R) laser printer"	on \
+GS_lp2400	"D: Epson LP-2400 laser printer"	on \
+GS_lp2200	"D: Epson LP-2200 laser printer"	on \
+GS_lp9400	"D: Epson LP-9400(R) laser printer"	on \
+GS_lp8900	"D: Epson LP-8900(R) laser printer"	on \
+GS_lp8700	"D: Epson LP-8700(R) laser printer"	on \
+GS_lp8100	"D: Epson LP-8100(R) laser printer"	on \
+GS_lp7700	"D: Epson LP-7700(R) laser printer"	on \
+GS_lp8600f	"D: Epson LP-8600FX(N) laser printer"	on \
+GS_lp8400f	"D: Epson LP-8400FX(N) laser printer"	on \
+GS_lp8300f	"D: Epson LP-8300F laser printer"	on \
+GS_lp1900	"D: Epson LP-1900(N) laser printer"	on \
+GS_lp9600s	"D: Epson LP-9600S laser printer"	on \
+GS_lp9300	"D: Epson LP-9300 laser printer"	on \
+GS_lp9600	"D: Epson LP-9600 laser printer"	on \
+GS_lp8600	"D: Epson LP-8600FX(N) laser printer"	on \
+GS_lp1800	"D: Epson LP-1800 laser printer"	on \
+GS_lq850	"D: Epson LQ-850 (360x360, emul on Canon BJ300)"	on \
 GS_epsonc	"D: Epson LQ-2550, Fujitsu 3400/2400/1200 color"	on \
-GS_mj700v2c	"D: Epson MachJet series, CMYK [contr]"	on \
-GS_mj500c	"D: Epson MachJet MJ-500C 360dpi, CMY/mono [contr]"	on \
-GS_mj6000c	"D: Epson MachJet MJ-830C/930C/6000C [contr]"	on \
-GS_mj8000c	"D: Epson MachJet MJ-8000C [contr]"	on \
+GS_mj700v2c	"D: Epson MachJet series, CMYK"	on \
+GS_mj500c	"D: Epson MachJet MJ-500C 360dpi, CMY/mono"	on \
+GS_mj6000c	"D: Epson MachJet MJ-830C/930C/6000C"	on \
+GS_mj8000c	"D: Epson MachJet MJ-8000C"	on \
 GS_st800	"D: Epson Stylus 800 printer"	on \
-GS_stcolor	"D: Epson Stylus Color and II/IIs/1500 (see driver docu)"	on \
-GS_photoex	"D: Epson Stylus Color Photo, Photo EX, Photo 700"	on \
-GS_fmlbp	"D: Fujitsu contrib2xx Page Printer [contr]"	on \
-GS_fmpr	"D: Fujitsu contrib [contr]"	on \
+GS_stcolor	"D: Epson Stylus Color and II/IIs/1500"	on \
+GS_photoex	"D: Epson Stylus Color Photo/Photo EX/Photo 700"	on \
+GS_fmlbp	"D: Fujitsu contrib2xx Page Printer"	on \
+GS_fmpr		"D: Fujitsu contrib"	on \
 GS_lp2563	"D: HP 2563B line printer"	on \
 GS_dnj650c	"D: HP DesignJet 650C"	on \
 GS_deskjet	"D: HP DeskJet and DeskJet Plus"	on \
 GS_djet500	"D: HP DeskJet 500 (for DeskJet 600 use -r600)"	on \
-GS_cdeskjet	"D: HP DeskJet 500C, 1 bit/pixel color"	on \
-GS_djet500c	"D: HP DeskJet 500C alternate driver, not for 550/560C"	on \
-GS_cdjcolor	"D: HP DeskJet 500C/540C (24b/px), Citizen Projet IIc"	on \
-GS_cdjmono	"D: HP DeskJet 500/510/520/540C b/w printing"	on \
+GS_cdeskjet	"D: HP DeskJet 500C (1b/px)"	on \
+GS_djet500c	"D: HP DeskJet 500C (alternative)"	on \
+GS_cdjcolor	"D: HP DeskJet 500C/540C (24b/px)"	on \
+GS_cdjmono	"D: HP DeskJet 500/510/520/540C (mono)"	on \
 GS_cdj500	"D: HP DeskJet 500/540C (same as cdjcolor)"	on \
 GS_cdj550	"D: HP DeskJet 550C/560C/660C/660Cse"	on \
 GS_dj505j	"D: HP DeskJet 505J"	on \
-GS_cdj670	"D: HP DeskJet 670/690 [contr]"	on \
-GS_cdj850	"D: HP DeskJet 850/855/870/1100 [contr]"	on \
-GS_cdj880	"D: HP DeskJet 880 [contr]"	on \
-GS_cdj890	"D: HP DeskJet 890 [contr]"	on \
-GS_cdj1600	"D: HP DeskJet 1600 [contr]"	on \
-GS_chp2200	"D: HP Business Inkjet 2200 [contr]"	on \
-GS_cdj970	"D: HP DeskJet 970CXi [contr]"	on \
+GS_cdj670	"D: HP DeskJet 670/690"	on \
+GS_cdj850	"D: HP DeskJet 850/855/870/1100"	on \
+GS_cdj880	"D: HP DeskJet 880"	on \
+GS_cdj890	"D: HP DeskJet 890"	on \
+GS_cdj1600	"D: HP DeskJet 1600"	on \
+GS_chp2200	"D: HP Business Inkjet 2200"	on \
+GS_cdj970	"D: HP DeskJet 970CXi"	on \
 GS_laserjet	"D: HP LaserJet"	on \
 GS_ljetplus	"D: HP LaserJet Plus"	on \
-GS_ljet2p	"D: HP LaserJet IId/IIp/III* with TIFF compression"	on \
-GS_ljet3	"D: HP LaserJet III* with Delta Row compression"	on \
-GS_ljet3d	"D: HP LaserJet IIID with duplex capability"	on \
+GS_ljet2p	"D: HP LaserJet IId/IIp/III* (TIFF compression)"	on \
+GS_ljet3	"D: HP LaserJet III* (Delta Row compression)"	on \
+GS_ljet3d	"D: HP LaserJet IIID (duplex capability)"	on \
 GS_ljet4	"D: HP LaserJet 4/5L/5P (not real LJ5), 600dpi"	on \
-GS_ljet4d	"D: HP LaserJet 4 with duplex, 600dpi"	on \
-GS_lj4dith	"D: HP LaserJet 4 with Floyd-Steinberg dithering"	on \
+GS_ljet4d	"D: HP LaserJet 4 (duplex + 600dpi)"	on \
+GS_lj4dith	"D: HP LaserJet 4 (Floyd-Steinberg dithering)"	on \
 GS_ljet4pjl	"D: HP LaserJet 4V/4LJ Pro"	on \
-GS_lj4dithp	"D: HP LaserJet 4V/4LJ Pro with dithering"	on \
-GS_cljet5	"D: HP LaserJet 5/5M Color (new driver, old=cljet5pr)"	on \
+GS_lj4dithp	"D: HP LaserJet 4V/4LJ Pro (dithering)"	on \
+GS_cljet5	"D: HP LaserJet 5/5M Color (new)"	on \
 GS_cljet5c	"D: HP LaserJet 5/5M Color Simple"	on \
-GS_cljet5pr	"D: HP LaserJet 5/5M Color (old, rotation hacks/flaws)"	on \
-GS_lj5mono	"D: HP LaserJet 5 and 6 family (PCL5 / PCL XL), bitmap"	on \
-GS_lj5gray	"D: HP LaserJet 5 and 6 family, gray-scale bitmap"	on \
-GS_pj	"D: HP PaintJet XL driver"	on \
+GS_cljet5pr	"D: HP LaserJet 5/5M Color (old)"	on \
+GS_lj5mono	"D: HP LaserJet 5/6 (PCL5/PCL XL), bitmap"	on \
+GS_lj5gray	"D: HP LaserJet 5/6 gray-scale bitmap"	on \
+GS_pj		"D: HP PaintJet XL driver"	on \
 GS_pjetxl	"D: HP PaintJet XL driver (alternate)"	on \
-GS_pjxl	"D: HP PaintJet XL color printer"	on \
+GS_pjxl		"D: HP PaintJet XL color printer"	on \
 GS_paintjet	"D: HP PaintJet color printer (alternate)"	on \
-GS_pjxl300	"D: HP PaintJet XL300, DeskJet 1200C, HP CopyJet"	on \
-GS_pxlmono	"D: HP PCL XL mono printers (LaserJet 5/6 family)"	on \
-GS_pxlcolor	"D: HP PCL XL color printers (Color LaserJet 4500/5000)"	on \
-GS_pcl3	"D: HP PCL 3+ (generic) [contr]"	on \
-GS_ijs	"D: HP Inkjet and other raster devices"	on \
+GS_pjxl300	"D: HP PaintJet XL300, DeskJet 1200C, CopyJet"	on \
+GS_pxlmono	"D: HP PCL XL mono (LaserJet 5/6 family)"	on \
+GS_pxlcolor	"D: HP PCL XL color (Color LaserJet 4500/5000)"	on \
+GS_pcl3		"D: HP PCL 3+ (generic)"	on \
+GS_ijs		"D: HP Inkjet and other raster devices"	on \
 GS_ibmpro	"D: IBM 9-pin Proprinter"	on \
 GS_jetp3852	"D: IBM Jetprinter ink-jet color (Model \#3852)"	on \
 GS_imagen	"D: Imagen ImPress printers"	on \
 GS_fs600	"D: Kyocera FS-600 (600 dpi)"	on \
 GS_lxm5700m	"D: Lexmark 5700 monotone"	on \
-GS_lxm3200	"D: Lexmark 3200/Z12/Z22/Z31/Z32 [contr]"	on \
-GS_lx5000	"D: Lexmark 5000/Z51/Z82 [contr]"	on \
-GS_lex2050	"D: Lexmark 2050 [contr]"	on \
-GS_lex3200	"D: Lexmark 3200 [contr]"	on \
-GS_lex5700	"D: Lexmark 5700 [contr]"	on \
-GS_lex7000	"D: Lexmark 7000 [contr]"	on \
-GS_cp50	"D: Mitsubishi CP50 color"	on \
-GS_pr1000	"D: NEC PC-PR 1000 [contr]"	on \
-GS_pr1000_4	"D: NEC PC-PR 1000/4 [contr]"	on \
-GS_pr150	"D: NEC PC-PR 150 [contr]"	on \
-GS_pr201	"D: NEC PC-PR 201 [contr]"	on \
+GS_lxm3200	"D: Lexmark 3200/Z12/Z22/Z31/Z32"	on \
+GS_lx5000	"D: Lexmark 5000/Z51/Z82"	on \
+GS_lex2050	"D: Lexmark 2050"	on \
+GS_lex3200	"D: Lexmark 3200"	on \
+GS_lex5700	"D: Lexmark 5700"	on \
+GS_lex7000	"D: Lexmark 7000"	on \
+GS_cp50		"D: Mitsubishi CP50 color"	on \
+GS_pr1000	"D: NEC PC-PR 1000"	on \
+GS_pr1000_4	"D: NEC PC-PR 1000/4"	on \
+GS_pr150	"D: NEC PC-PR 150"	on \
+GS_pr201	"D: NEC PC-PR 201"	on \
 GS_picty180	"D: NEC PICTY 180 (PC-PR101J/180)"	on \
-GS_necp6	"D: NEC PinWriter P6/P6+/P60, 360x360 DPI resol"	on \
-GS_npdl	"D: NEC Printer Description Language [contr]"	on \
+GS_necp6	"D: NEC PinWriter P6/P6+/P60 (360x360)"	on \
+GS_npdl		"D: NEC Printer Description Language"	on \
 GS_oce9050	"D: OCE 9050 printer"	on \
 GS_oki182	"D: Okidata MicroLine 182"	on \
 GS_okiibm	"D: Okidata MicroLine IBM-compatible printers"	on \
-GS_ml600	"D: Okidata Microline 600CL/620CL [contr]"	on \
-GS_oki4w	"D: Okidata OkiPage 4w+ [contr]"	on \
-GS_atx23	"D: Practical Automation ATX-23 label printer"	on \
-GS_atx24	"D: Practical Automation ATX-24 label printer"	on \
-GS_atx38	"D: Practical Automation ATX-38 label printer"	on \
+GS_ml600	"D: Okidata Microline 600CL/620CL"	on \
+GS_oki4w	"D: Okidata OkiPage 4w+"	on \
+GS_atx23	"D: Practical Automation ATX-23"	on \
+GS_atx24	"D: Practical Automation ATX-24"	on \
+GS_atx38	"D: Practical Automation ATX-38"	on \
 GS_r4081	"D: Ricoh 4081 laser printer"	on \
-GS_rpdl	"D: Ricoh Printer Description Language [contr]"	on \
-GS_gdi	"D: Samsung SmartGDI laser printer [contr]"	on \
-GS_jj100	"D: Star JJ-100 [contr]"	on \
-GS_sj48	"D: StarJet 48 inkjet printer"	on \
-GS_t4693d2	"D: Tektronix 4693d color, 2 bits per R/G/B component"	on \
-GS_t4693d4	"D: Tektronix 4693d color, 4 bits per R/G/B component"	on \
-GS_t4693d8	"D: Tektronix 4693d color, 8 bits per R/G/B component"	on \
+GS_rpdl		"D: Ricoh Printer Description Language"	on \
+GS_gdi		"D: Samsung SmartGDI laser printer"	on \
+GS_jj100	"D: Star JJ-100"	on \
+GS_sj48		"D: StarJet 48 inkjet printer"	on \
+GS_t4693d2	"D: Tektronix 4693d color, 2b/RGB"	on \
+GS_t4693d4	"D: Tektronix 4693d color, 4b/RGB"	on \
+GS_t4693d8	"D: Tektronix 4693d color, 8b/RGB"	on \
 GS_tek4696	"D: Tektronix 4695/4696 inkjet plotter"	on \
-GS_xes	"D: Xerox XES (2700, 3700, 4045, etc.) [contr]"	on \
+GS_xes		"D: Xerox XES (2700, 3700, 4045, etc.)"	on \
 GS_bmpmono	"D: BMP Monochrome"	on \
 GS_bmpgray	"D: BMP 8-bit gray"	on \
 GS_bmp16	"D: BMP 4-bit EGA/VGA"	on \
@@ -237,88 +238,88 @@ GS_bmp16m	"D: BMP 24-bit"	on \
 GS_bmp32b	"D: BMP 32-bit pseudo-.BMP"	on \
 GS_bmpsep1	"D: BMP Separated 1-bit CMYK"	on \
 GS_bmpsep8	"D: BMP Separated 8-bit CMYK"	on \
-GS_ccr	"D: CalComp Raster format"	on \
+GS_ccr		"D: CalComp Raster format"	on \
 GS_cgmmono	"D: CGM Monochrome -- LOW LEVEL OUTPUT ONLY"	on \
-GS_cgm8	"D: CGM 8-bit 256-color -- DITTO"	on \
+GS_cgm8		"D: CGM 8-bit 256-color -- DITTO"	on \
 GS_cgm24	"D: CGM 24-bit color -- DITTO"	on \
-GS_cif	"D: CIF file format for VLSI"	on \
-GS_dfaxhigh	"D: DigiBoard, DigiFAX software format (high resol)"	on \
-GS_dfaxlow	"D: DigiFAX low (normal) resol"	on \
-GS_xcf	"D: Gimp XCF, RGB"	on \
+GS_cif		"D: CIF file format for VLSI"	on \
+GS_dfaxhigh	"D: DigiBoard, DigiFAX (high res)"	on \
+GS_dfaxlow	"D: DigiFAX (normal res)"	on \
+GS_xcf		"D: Gimp XCF, RGB"	on \
 GS_xcfcmyk	"D: Gimp XCF, CMYK"	on \
-GS_faxg3	"D: Group 3 fax, with EOLs but no header or EOD"	on \
-GS_faxg32d	"D: Group 3 2-D fax, with EOLs but no header or EOD"	on \
-GS_faxg4	"D: Group 4 fax, with EOLs but no header or EOD"	on \
-GS_miff24	"D: ImageMagick MIFF, 24-bit direct color, RLE compressed"	on \
+GS_faxg3	"D: Group 3 FAX (EOL + no header/EOD)"	on \
+GS_faxg32d	"D: Group 3 2-D FAX (EOL + no header/EOD)"	on \
+GS_faxg4	"D: Group 4 FAX, with EOLs but no header or EOD"	on \
+GS_miff24	"D: ImageMagick MIFF, 24-bit direct color, RLE"	on \
 GS_inferno	"D: Inferno bitmaps"	on \
-GS_jpeg	"D: JPEG format, RGB output"	on \
+GS_jpeg		"D: JPEG format, RGB output"	on \
 GS_jpeggray	"D: JPEG format, gray output"	on \
-GS_mag16	"D: MAG format, 16-color [contr]"	on \
-GS_mag256	"D: MAG format, 256-color [contr]"	on \
+GS_mag16	"D: MAG format, 16-color"xs	on \
+GS_mag256	"D: MAG format, 256-color"	on \
 GS_mgrmono	"D: MGR devices 1-bit monochrome"	on \
 GS_mgrgray2	"D: MGR devices 2-bit gray scale"	on \
 GS_mgrgray4	"D: MGR devices 4-bit gray scale"	on \
 GS_mgrgray8	"D: MGR devices 8-bit gray scale"	on \
-GS_mgr4	"D: MGR devices 4-bit (VGA) color"	on \
-GS_mgr8	"D: MGR devices 8-bit color"	on \
-GS_pcxmono	"D: PCX file format, monochrome 1-bit b/w"	on \
-GS_pcxgray	"D: PCX file format, 8-bit gray scale"	on \
-GS_pcx16	"D: PCX file format, 4-bit planar EGA/VGA color"	on \
-GS_pcx256	"D: PCX file format, 8-bit chunky color"	on \
-GS_pcx24b	"D: PCX file format, 24-bit color 3x8-bit planes"	on \
-GS_pcxcmyk	"D: PCX file format, 4-bit chunky CMYK color"	on \
-GS_pdfwrite	"D: PDF output (like Adobe Acrobat Distiller)"	on \
+GS_mgr4		"D: MGR devices 4-bit (VGA) color"	on \
+GS_mgr8		"D: MGR devices 8-bit color"	on \
+GS_pcxmono	"D: PCX, 1-bit monochrome"	on \
+GS_pcxgray	"D: PCX, 8-bit gray scale"	on \
+GS_pcx16	"D: PCX, 4-bit planar EGA/VGA color"	on \
+GS_pcx256	"D: PCX, 8-bit chunky color"	on \
+GS_pcx24b	"D: PCX, 24-bit color 3x8-bit planes"	on \
+GS_pcxcmyk	"D: PCX, 4-bit chunky CMYK color"	on \
+GS_pdfwrite	"D: Portable Document Format"	on \
 GS_psdrgb	"D: PhotoShop PSD, RGB"	on \
 GS_psdcmyk	"D: PhotoShop PSD, CMYK"	on \
-GS_bit	"D: Plain bits, monochrome"	on \
+GS_bit		"D: Plain bits, monochrome"	on \
 GS_bitrgb	"D: Plain bits, RGB"	on \
 GS_bitcmyk	"D: Plain bits, CMYK"	on \
 GS_plan9bm	"D: Plan 9 bitmap format"	on \
-GS_pam	"D: Portable Arbitrary Map file format"	on \
-GS_pbm	"D: Portable Bitmap,  plain format"	on \
-GS_pbmraw	"D: Portable Bitmap,  raw format"	on \
-GS_pgm	"D: Portable Graymap, plain format"	on \
-GS_pgmraw	"D: Portable Graymap, raw format"	on \
-GS_pgnm	"D: Portable Graymap, plain format, optim. to PBM"	on \
-GS_pgnmraw	"D: Portable Graymap, raw format, optim. to PBM"	on \
-GS_pnm	"D: Portable Pixmap,  plain format RGB, optim. to PGM/PBM"	on \
-GS_pnmraw	"D: Portable Pixmap,  raw format RGB, optim. to PGM/PBM"	on \
-GS_ppm	"D: Portable Pixmap,  plain format RGB"	on \
+GS_pam		"D: Portable Arbitrary Map file"	on \
+GS_pbm		"D: Portable Bitmap, plain"	on \
+GS_pbmraw	"D: Portable Bitmap, raw"	on \
+GS_pgm		"D: Portable Graymap, plain"	on \
+GS_pgmraw	"D: Portable Graymap, raw"	on \
+GS_pgnm		"D: Portable Graymap, plain (PBM opt)"	on \
+GS_pgnmraw	"D: Portable Graymap, raw (PBM opt)"	on \
+GS_pnm		"D: Portable Pixmap, plain RGB (PGM/PBM opt)"	on \
+GS_pnmraw	"D: Portable Pixmap, raw RGB, (PGM/PBM opt)"	on \
+GS_ppm		"D: Portable Pixmap, plain RGB"	on \
 GS_ppmraw	"D: Portable Pixmap,  raw format RGB"	on \
-GS_pkm	"D: Portable inKmap (plain format) (4-bit CMYK => RGB)"	on \
-GS_pkmraw	"D: Portable inKmap (raw format) (4-bit CMYK => RGB)"	on \
-GS_pksm	"D: Portable Separated map (plain) (4-bit CMYK => 4 pages)"	on \
-GS_pksmraw	"D: Portable Separated map (raw) (4-bit CMYK => 4 pages)"	on \
-GS_pngmono	"D: PNG Monochrome Portable Network Graphics"	on \
-GS_pnggray	"D: PNG 8-bit gray Portable Network Graphics"	on \
-GS_png16	"D: PNG 4-bit color Portable Network Graphics"	on \
-GS_png256	"D: PNG 8-bit color Portable Network Graphics"	on \
-GS_png16m	"D: PNG 24-bit color Portable Network Graphics"	on \
-GS_pngalpha	"D: PNG 32-bit RGBA color Portable Network Graphics"	on \
+GS_pkm		"D: Portable inKmap, plain (4b CMYK=>RGB)"	on \
+GS_pkmraw	"D: Portable inKmap, raw (4b CMYK=>RGB)"	on \
+GS_pksm		"D: Portable Separated map, plain (4b CMYK=>4p)"	on \
+GS_pksmraw	"D: Portable Separated map, raw (4b CMYK=>4p)"	on \
+GS_pngmono	"D: PNG (Portable Network Graphics) Mono"	on \
+GS_pnggray	"D: PNG 8-bit Gray"	on \
+GS_png16	"D: PNG 4-bit Color"	on \
+GS_png256	"D: PNG 8-bit Color"	on \
+GS_png16m	"D: PNG 24-bit Color"	on \
+GS_pngalpha	"D: PNG 32-bit RGBA Color"	on \
 GS_psmono	"D: PostScript (Level 1) monochrome image"	on \
 GS_psgray	"D: PostScript (Level 1) 8-bit gray image"	on \
 GS_psrgb	"D: PostScript (Level 2) 24-bit color image"	on \
-GS_pswrite	"D: PostScript output (like PostScript Distillery)"	on \
+GS_pswrite	"D: PostScript (like PostScript Distiller)"	on \
 GS_ps2write	"D: PostScript (Level 2) output"	on \
-GS_epswrite	"D: EPS output (like PostScript Distillery)"	on \
-GS_cfax	"D: SFF format for CAPI fax interface"	on \
+GS_epswrite	"D: Encapsulated PostScript"	on \
+GS_cfax		"D: SFF format for CAPI FAX interface"	on \
 GS_sgirgb	"D: SGI RGB pixmap format"	on \
 GS_sunhmono	"D: Harlequin variant of 1-bit Sun raster file"	on \
-GS_tiffcrle	"D: TIFF CCITT RLE 1 dim = Group 3 fax with no EOLs"	on \
-GS_tiffg3	"D: TIFF Group 3 fax with EOLs"	on \
-GS_tiffg32d	"D: TIFF Group 3 2-D fax"	on \
-GS_tiffg4	"D: TIFF Group 4 fax"	on \
-GS_tiffgray	"D: TIFF 8-bit gray, no compression"	on \
-GS_tiff12nc	"D: TIFF 12-bit RGB, no compression"	on \
-GS_tiff24nc	"D: TIFF 24-bit RGB, no compression, NeXT std. format"	on \
+GS_tiffcrle	"D: TIFF CCITT RLE 1 dim (G3 FAX with no EOL)"	on \
+GS_tiffg3	"D: TIFF Group 3 FAX (with EOL)"	on \
+GS_tiffg32d	"D: TIFF Group 3 2-D FAX"	on \
+GS_tiffg4	"D: TIFF Group 4 FAX"	on \
+GS_tiffgray	"D: TIFF 8-bit gray, no compress"	on \
+GS_tiff12nc	"D: TIFF 12-bit RGB, no compress"	on \
+GS_tiff24nc	"D: TIFF 24-bit RGB, no compress, NeXT format"	on \
 GS_tiff32nc	"D: TIFF 32-bit CMYK"	on \
-GS_tiffsep	"D: TIFF gray for each colorant plus a CMYK composite"	on \
+GS_tiffsep	"D: TIFF gray + CMYK composite"	on \
 GS_tifflzw	"D: TIFF LZW,      tag = 5,     mono"	on \
 GS_tiffpack	"D: TIFF PackBits, tag = 32773, mono"	on \
-GS_bbox	"D: Bounding box output"	on \
+GS_bbox		"D: Bounding box output"	on \
 GS_devicen	"D: DeviceN process color model device"	on \
-GS_perm	"D: DeviceN which permutes color components"	on \
+GS_perm		"D: DeviceN which permutes color components"	on \
 GS_spotcmyk	"D: DeviceN with CMYK and spot color support"	on \
-GS_imdi	"D: IMDI color converting device"	on \
+GS_imdi		"D: IMDI color converting device"	on \
 GS_wtsimdi	"D: WTS halftoning device"	on \
 GS_wtscmyk	"D: WTS halftoning CMYK device"	on
diff --git a/print/ghostscript-gpl/files/patch-ijs-Makefile.in b/print/ghostscript-gpl/files/patch-ijs-Makefile.in
deleted file mode 100644
index 149eefd72084..000000000000
--- a/print/ghostscript-gpl/files/patch-ijs-Makefile.in
+++ /dev/null
@@ -1,705 +0,0 @@
---- /dev/null	2008-05-04 15:23:37.000000000 +0900
-+++ ijs/Makefile.in	2008-05-04 15:23:14.000000000 +0900
-@@ -0,0 +1,702 @@
-+# Makefile.in generated by automake 1.6.3 from Makefile.am.
-+# @configure_input@
-+
-+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-+# Free Software Foundation, Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+@SET_MAKE@
-+SHELL = @SHELL@
-+
-+srcdir = @srcdir@
-+top_srcdir = @top_srcdir@
-+VPATH = @srcdir@
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+bindir = @bindir@
-+sbindir = @sbindir@
-+libexecdir = @libexecdir@
-+datadir = @datadir@
-+sysconfdir = @sysconfdir@
-+sharedstatedir = @sharedstatedir@
-+localstatedir = @localstatedir@
-+libdir = @libdir@
-+infodir = @infodir@
-+mandir = @mandir@
-+includedir = @includedir@
-+oldincludedir = /usr/include
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+top_builddir = .
-+
-+ACLOCAL = @ACLOCAL@
-+AUTOCONF = @AUTOCONF@
-+AUTOMAKE = @AUTOMAKE@
-+AUTOHEADER = @AUTOHEADER@
-+
-+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+install_sh_DATA = $(install_sh) -c -m 644
-+install_sh_PROGRAM = $(install_sh) -c
-+install_sh_SCRIPT = $(install_sh) -c
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+INSTALL_HEADER = $(INSTALL_DATA)
-+transform = @program_transform_name@
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+host_alias = @host_alias@
-+host_triplet = @host@
-+
-+EXEEXT = @EXEEXT@
-+OBJEXT = @OBJEXT@
-+PATH_SEPARATOR = @PATH_SEPARATOR@
-+
-+pkgincludedir = $(includedir)/ijs
-+AMTAR = @AMTAR@
-+AR = @AR@
-+AS = @AS@
-+AWK = @AWK@
-+CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
-+DB2PS = @DB2PS@
-+DEPDIR = @DEPDIR@
-+DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
-+IJS_BINARY_AGE = @IJS_BINARY_AGE@
-+IJS_CFLAGS = @IJS_CFLAGS@
-+IJS_CURRENT_INTERFACE = @IJS_CURRENT_INTERFACE@
-+IJS_DEPLIBS = @IJS_DEPLIBS@
-+IJS_INTERFACE_AGE = @IJS_INTERFACE_AGE@
-+IJS_LIBS = @IJS_LIBS@
-+IJS_MAJOR_VERSION = @IJS_MAJOR_VERSION@
-+IJS_MINOR_VERSION = @IJS_MINOR_VERSION@
-+IJS_VERSION = @IJS_VERSION@
-+INCLUDES = @INCLUDES@
-+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-+LIBIJS_LIBS = @LIBIJS_LIBS@
-+LIBTOOL = @LIBTOOL@
-+LIBTOOL_DEPS = @LIBTOOL_DEPS@
-+LN_S = @LN_S@
-+LT_AGE = @LT_AGE@
-+LT_CURRENT = @LT_CURRENT@
-+LT_RELEASE = @LT_RELEASE@
-+LT_REVISION = @LT_REVISION@
-+OBJDUMP = @OBJDUMP@
-+PACKAGE = @PACKAGE@
-+PS2PDF = @PS2PDF@
-+RANLIB = @RANLIB@
-+RC = @RC@
-+SED = @SED@
-+STRIP = @STRIP@
-+VERSION = @VERSION@
-+am__include = @am__include@
-+am__quote = @am__quote@
-+ijs_cflags = @ijs_cflags@
-+ijs_libs = @ijs_libs@
-+install_sh = @install_sh@
-+
-+AUTOMAKE_OPTIONS = 1.6 foreign dist-bzip2 no-dependencies 
-+
-+MAINT_CHARSET = latin1
-+m4datadir = $(datadir)/aclocal
-+pkgconfigdir = $(libdir)/pkgconfig
-+
-+lib_LTLIBRARIES = libijs.la
-+
-+pkginclude_HEADERS = \
-+	ijs_client.h \
-+	ijs.h \
-+	ijs_server.h
-+
-+
-+noinst_HEADERS = unistd_.h
-+
-+bin_PROGRAMS = ijs_client_example ijs_server_example
-+
-+bin_SCRIPTS = ijs-config
-+
-+libijs_la_SOURCES = \
-+	ijs.c \
-+	ijs_client.c \
-+	ijs_server.c
-+
-+#ijs_version.c
-+EXTRA_libijs_la_SOURCES = ijs_exec_unix.c ijs_exec_win.c
-+@SYSDEPS_WINDOWS_TRUE@libijs_la_LIBADD = ijs_exec_win.lo $(IJS_DEPLIBS)
-+@SYSDEPS_WINDOWS_FALSE@libijs_la_LIBADD = ijs_exec_unix.lo $(IJS_DEPLIBS)
-+# Uncommment to build an unversioned library (version in soname)
-+libijs_la_LDFLAGS = -release $(IJS_VERSION) -rpath $(libdir)
-+
-+# Uncomment to build a versioned library
-+#libijs_la_LDFLAGS = \
-+# -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) \
-+# -rpath $(libdir)
-+ijs_client_example_SOURCES = ijs_client_example.c
-+ijs_client_example_LDADD = libijs.la
-+
-+ijs_server_example_SOURCES = ijs_server_example.c
-+ijs_server_example_LDADD = libijs.la
-+
-+pkgconfig_DATA = ijs.pc
-+
-+man_MANS = ijs-config.1
-+
-+EXTRA_DIST = \
-+	common.mak unix.mak windows.mak \
-+	ijs_spec.sgml state.eps state.fig ijs_spec.pdf \
-+	$(man_MANS)
-+
-+
-+
-+# Note that ijs_spec.pdf is included in the dist list above,
-+# so the 'doc' target needs to be build for 'make dist' to work.
-+CLEANSCRIPTS = \
-+	depcomp \
-+	install-sh \
-+	ltconfig \
-+	mdate-sh \
-+	missing \
-+	mkinstalldirs \
-+	config.guess \
-+	config.sub \
-+	ltmain.sh
-+
-+
-+CLEANFILES = gmon.out core ijs_spec.log ijs_spec.tex ijs_spec.aux ijs_spec.ps ijs_spec.pdf
-+DISTCLEANFILES = ijs-config config.cache config.log config.status
-+# ijs-config.in ijs.pc ijs.pc.in ijs.m4 ijs.h
-+MAINTAINERCLEANFILES = INSTALL aclocal.m4 config.h.in configure Makefile.in stamp-h.in $(CLEANSCRIPTS)
-+subdir = .
-+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-+CONFIG_CLEAN_FILES = ijs-config ijs.pc
-+LTLIBRARIES = $(lib_LTLIBRARIES)
-+
-+@SYSDEPS_WINDOWS_TRUE@libijs_la_DEPENDENCIES = ijs_exec_win.lo
-+@SYSDEPS_WINDOWS_FALSE@libijs_la_DEPENDENCIES = ijs_exec_unix.lo
-+am_libijs_la_OBJECTS = ijs.lo ijs_client.lo ijs_server.lo
-+libijs_la_OBJECTS = $(am_libijs_la_OBJECTS)
-+bin_PROGRAMS = ijs_client_example$(EXEEXT) ijs_server_example$(EXEEXT)
-+PROGRAMS = $(bin_PROGRAMS)
-+
-+am_ijs_client_example_OBJECTS = ijs_client_example.$(OBJEXT)
-+ijs_client_example_OBJECTS = $(am_ijs_client_example_OBJECTS)
-+ijs_client_example_DEPENDENCIES = libijs.la
-+ijs_client_example_LDFLAGS =
-+am_ijs_server_example_OBJECTS = ijs_server_example.$(OBJEXT)
-+ijs_server_example_OBJECTS = $(am_ijs_server_example_OBJECTS)
-+ijs_server_example_DEPENDENCIES = libijs.la
-+ijs_server_example_LDFLAGS =
-+SCRIPTS = $(bin_SCRIPTS)
-+
-+
-+DEFS = @DEFS@
-+DEFAULT_INCLUDES =  -I. -I$(srcdir)
-+CPPFLAGS = @CPPFLAGS@
-+LDFLAGS = @LDFLAGS@
-+LIBS = @LIBS@
-+depcomp =
-+am__depfiles_maybe =
-+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
-+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(CC)
-+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-+CFLAGS = @CFLAGS@
-+DIST_SOURCES = $(libijs_la_SOURCES) $(EXTRA_libijs_la_SOURCES) \
-+	$(ijs_client_example_SOURCES) $(ijs_server_example_SOURCES)
-+
-+NROFF = nroff
-+MANS = $(man_MANS)
-+DATA = $(pkgconfig_DATA)
-+
-+HEADERS = $(noinst_HEADERS) $(pkginclude_HEADERS)
-+
-+DIST_COMMON = README $(noinst_HEADERS) $(pkginclude_HEADERS) \
-+	Makefile.am Makefile.in aclocal.m4 config.guess config.sub \
-+	configure configure.ac ijs-config.in ijs.pc.in install-sh \
-+	ltmain.sh missing mkinstalldirs
-+SOURCES = $(libijs_la_SOURCES) $(EXTRA_libijs_la_SOURCES) $(ijs_client_example_SOURCES) $(ijs_server_example_SOURCES)
-+
-+all: all-am
-+
-+.SUFFIXES:
-+.SUFFIXES: .c .lo .o .obj
-+
-+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
-+ configure.lineno
-+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
-+	cd $(top_srcdir) && \
-+	  $(AUTOMAKE) --foreign  Makefile
-+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-+
-+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-+	$(SHELL) ./config.status --recheck
-+$(srcdir)/configure:  $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-+	cd $(srcdir) && $(AUTOCONF)
-+
-+$(ACLOCAL_M4):  configure.ac 
-+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+ijs-config: $(top_builddir)/config.status ijs-config.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
-+ijs.pc: $(top_builddir)/config.status ijs.pc.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
-+libLTLIBRARIES_INSTALL = $(INSTALL)
-+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(libdir)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	  if test -f $$p; then \
-+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
-+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-libLTLIBRARIES:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
-+	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
-+	done
-+
-+clean-libLTLIBRARIES:
-+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-+	  test -z "$dir" && dir=.; \
-+	  echo "rm -f \"$${dir}/so_locations\""; \
-+	  rm -f "$${dir}/so_locations"; \
-+	done
-+libijs.la: $(libijs_la_OBJECTS) $(libijs_la_DEPENDENCIES) 
-+	$(LINK) -rpath $(libdir) $(libijs_la_LDFLAGS) $(libijs_la_OBJECTS) $(libijs_la_LIBADD) $(LIBS)
-+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-+install-binPROGRAMS: $(bin_PROGRAMS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(bindir)
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-+	  if test -f $$p \
-+	     || test -f $$p1 \
-+	  ; then \
-+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
-+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-binPROGRAMS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-+	  rm -f $(DESTDIR)$(bindir)/$$f; \
-+	done
-+
-+clean-binPROGRAMS:
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-+	  echo " rm -f $$p $$f"; \
-+	  rm -f $$p $$f ; \
-+	done
-+ijs_client_example$(EXEEXT): $(ijs_client_example_OBJECTS) $(ijs_client_example_DEPENDENCIES) 
-+	@rm -f ijs_client_example$(EXEEXT)
-+	$(LINK) $(ijs_client_example_LDFLAGS) $(ijs_client_example_OBJECTS) $(ijs_client_example_LDADD) $(LIBS)
-+ijs_server_example$(EXEEXT): $(ijs_server_example_OBJECTS) $(ijs_server_example_DEPENDENCIES) 
-+	@rm -f ijs_server_example$(EXEEXT)
-+	$(LINK) $(ijs_server_example_LDFLAGS) $(ijs_server_example_OBJECTS) $(ijs_server_example_LDADD) $(LIBS)
-+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-+install-binSCRIPTS: $(bin_SCRIPTS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(bindir)
-+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  if test -f $$d$$p; then \
-+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-+	    echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
-+	    $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-binSCRIPTS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-+	  rm -f $(DESTDIR)$(bindir)/$$f; \
-+	done
-+
-+mostlyclean-compile:
-+	-rm -f *.$(OBJEXT) core *.core
-+
-+distclean-compile:
-+	-rm -f *.tab.c
-+
-+.c.o:
-+	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-+
-+.c.obj:
-+	$(COMPILE) -c `cygpath -w $<`
-+
-+.c.lo:
-+	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-+
-+mostlyclean-libtool:
-+	-rm -f *.lo
-+
-+clean-libtool:
-+	-rm -rf .libs _libs
-+
-+distclean-libtool:
-+	-rm -f libtool
-+uninstall-info-am:
-+
-+man1dir = $(mandir)/man1
-+install-man1: $(man1_MANS) $(man_MANS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-+	for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.1*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-+	  else file=$$i; fi; \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  case "$$ext" in \
-+	    1*) ;; \
-+	    *) ext='1' ;; \
-+	  esac; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-+	done
-+uninstall-man1:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-+	for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.1*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-+	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-+	done
-+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-+install-pkgconfigDATA: $(pkgconfig_DATA)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
-+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \
-+	  $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \
-+	done
-+
-+uninstall-pkgconfigDATA:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \
-+	  rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \
-+	done
-+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
-+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f"; \
-+	  $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f; \
-+	done
-+
-+uninstall-pkgincludeHEADERS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " rm -f $(DESTDIR)$(pkgincludedir)/$$f"; \
-+	  rm -f $(DESTDIR)$(pkgincludedir)/$$f; \
-+	done
-+
-+ETAGS = etags
-+ETAGSFLAGS =
-+
-+tags: TAGS
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	mkid -fID $$unique
-+
-+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-+		$(TAGS_FILES) $(LISP)
-+	tags=; \
-+	here=`pwd`; \
-+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	     $$tags $$unique
-+
-+GTAGS:
-+	here=`$(am__cd) $(top_builddir) && pwd` \
-+	  && cd $(top_srcdir) \
-+	  && gtags -i $(GTAGS_ARGS) $$here
-+
-+distclean-tags:
-+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-+
-+top_distdir = .
-+distdir = $(PACKAGE)-$(VERSION)
-+
-+am__remove_distdir = \
-+  { test ! -d $(distdir) \
-+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-+         && rm -fr $(distdir); }; }
-+
-+GZIP_ENV = --best
-+distcleancheck_listfiles = find . -type f -print
-+
-+distdir: $(DISTFILES)
-+	$(am__remove_distdir)
-+	mkdir $(distdir)
-+	$(mkinstalldirs) $(distdir)/.
-+	@list='$(DISTFILES)'; for file in $$list; do \
-+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-+	    dir="/$$dir"; \
-+	    $(mkinstalldirs) "$(distdir)$$dir"; \
-+	  else \
-+	    dir=''; \
-+	  fi; \
-+	  if test -d $$d/$$file; then \
-+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-+	    fi; \
-+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-+	  else \
-+	    test -f $(distdir)/$$file \
-+	    || cp -p $$d/$$file $(distdir)/$$file \
-+	    || exit 1; \
-+	  fi; \
-+	done
-+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-+	|| chmod -R a+r $(distdir)
-+dist-gzip: distdir
-+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	$(am__remove_distdir)
-+
-+dist-bzip2: distdir
-+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+dist dist-all: distdir
-+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+# This target untars the dist file and tries a VPATH configuration.  Then
-+# it guarantees that the distribution is self-contained by making another
-+# tarfile.
-+distcheck: dist
-+	$(am__remove_distdir)
-+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-+	chmod -R a-w $(distdir); chmod a+w $(distdir)
-+	mkdir $(distdir)/=build
-+	mkdir $(distdir)/=inst
-+	chmod a-w $(distdir)
-+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-+	  && cd $(distdir)/=build \
-+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-+	    $(DISTCHECK_CONFIGURE_FLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-+	  && $(MAKE) $(AM_MAKEFLAGS) check \
-+	  && $(MAKE) $(AM_MAKEFLAGS) install \
-+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-+	      || { echo "ERROR: files left after uninstall:" ; \
-+	           find $$dc_install_base -type f -print ; \
-+	           exit 1; } >&2 ) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-+	  && rm -f $(distdir).tar.gz \
-+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-+	$(am__remove_distdir)
-+	@echo "$(distdir).tar.gz is ready for distribution" | \
-+	  sed 'h;s/./=/g;p;x;p;x'
-+distcleancheck: distclean
-+	if test '$(srcdir)' = . ; then \
-+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-+	  exit 1 ; \
-+	fi
-+	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-+	  || { echo "ERROR: files left after distclean:" ; \
-+	       $(distcleancheck_listfiles) ; \
-+	       exit 1; } >&2
-+check-am: all-am
-+check: check-am
-+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \
-+		$(HEADERS)
-+install-binPROGRAMS: install-libLTLIBRARIES
-+
-+
-+installdirs:
-+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(pkgincludedir)
-+
-+install: install-am
-+install-exec: install-exec-am
-+install-data: install-data-am
-+uninstall: uninstall-am
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+
-+installcheck: installcheck-am
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	  INSTALL_STRIP_FLAG=-s \
-+	  `test -z '$(STRIP)' || \
-+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-+mostlyclean-generic:
-+
-+clean-generic:
-+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-+
-+distclean-generic:
-+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-+
-+maintainer-clean-generic:
-+	@echo "This command is intended for maintainers to use"
-+	@echo "it deletes files that may require special tools to rebuild."
-+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-+clean: clean-am
-+
-+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
-+	clean-libtool mostlyclean-am
-+
-+distclean: distclean-am
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+distclean-am: clean-am distclean-compile distclean-generic \
-+	distclean-libtool distclean-tags
-+
-+dvi: dvi-am
-+
-+dvi-am:
-+
-+info: info-am
-+
-+info-am:
-+
-+install-data-am: install-man install-pkgconfigDATA \
-+	install-pkgincludeHEADERS
-+
-+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
-+	install-libLTLIBRARIES
-+
-+install-info: install-info-am
-+
-+install-man: install-man1
-+
-+installcheck-am:
-+
-+maintainer-clean: maintainer-clean-am
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+	-rm -rf autom4te.cache
-+maintainer-clean-am: distclean-am maintainer-clean-generic
-+
-+mostlyclean: mostlyclean-am
-+
-+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-+	mostlyclean-libtool
-+
-+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
-+	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \
-+	uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
-+
-+uninstall-man: uninstall-man1
-+
-+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
-+	clean-generic clean-libLTLIBRARIES clean-libtool dist dist-all \
-+	dist-bzip2 dist-gzip distcheck distclean distclean-compile \
-+	distclean-generic distclean-libtool distclean-tags \
-+	distcleancheck distdir dvi dvi-am info info-am install \
-+	install-am install-binPROGRAMS install-binSCRIPTS install-data \
-+	install-data-am install-exec install-exec-am install-info \
-+	install-info-am install-libLTLIBRARIES install-man install-man1 \
-+	install-pkgconfigDATA install-pkgincludeHEADERS install-strip \
-+	installcheck installcheck-am installdirs maintainer-clean \
-+	maintainer-clean-generic mostlyclean mostlyclean-compile \
-+	mostlyclean-generic mostlyclean-libtool tags uninstall \
-+	uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \
-+	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \
-+	uninstall-man1 uninstall-pkgconfigDATA \
-+	uninstall-pkgincludeHEADERS
-+
-+
-+@SET_MAKE@
-+
-+# Libtool dependency
-+libtool: $(LIBTOOL_DEPS)
-+	$(SHELL) ./config.status --recheck
-+
-+doc: ijs_spec.ps ijs_spec.pdf
-+
-+# We don't use db2pdf because it can't handle embedded .eps
-+ijs_spec.ps: ijs_spec.sgml
-+	$(DB2PS) ijs_spec.sgml
-+
-+ijs_spec.pdf: ijs_spec.ps
-+	$(PS2PDF) ijs_spec.ps
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
diff --git a/print/ghostscript-gpl/files/patch-ijs-configure b/print/ghostscript-gpl/files/patch-ijs-configure
deleted file mode 100644
index 288d214e670a..000000000000
--- a/print/ghostscript-gpl/files/patch-ijs-configure
+++ /dev/null
@@ -1,21669 +0,0 @@
---- /dev/null	2008-05-04 15:23:37.000000000 +0900
-+++ ijs/configure	2008-05-04 15:23:34.000000000 +0900
-@@ -0,0 +1,21666 @@
-+#! /bin/sh
-+# From configure.ac Revision: 5783 .
-+# Guess values for system-dependent variables and create Makefiles.
-+# Generated by GNU Autoconf 2.61 for ijs 0.35.
-+#
-+# Report bugs to <inkjet-list@linuxprinting.org>.
-+#
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+# This configure script is free software; the Free Software Foundation
-+# gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization.  ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+  echo "#! /bin/sh" >conf$$.sh
-+  echo  "exit 0"   >>conf$$.sh
-+  chmod +x conf$$.sh
-+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+    PATH_SEPARATOR=';'
-+  else
-+    PATH_SEPARATOR=:
-+  fi
-+  rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+  as_unset=unset
-+else
-+  as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.  Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" ""	$as_nl"
-+
-+# Find who we are.  Look in the path if we contain no directory separator.
-+case $0 in
-+  *[\\/]* ) as_myself=$0 ;;
-+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+     ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+  as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+  { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+  LC_TELEPHONE LC_TIME
-+do
-+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+    eval $as_var=C; export $as_var
-+  else
-+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+  fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+  as_basename=basename
-+else
-+  as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+    sed '/^.*\/\([^/][^/]*\)\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+if test "x$CONFIG_SHELL" = x; then
-+  if (eval ":") 2>/dev/null; then
-+  as_have_required=yes
-+else
-+  as_have_required=no
-+fi
-+
-+  if test $as_have_required = yes && 	 (eval ":
-+(as_func_return () {
-+  (exit \$1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+  as_lineno_1=\$LINENO
-+  as_lineno_2=\$LINENO
-+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+  :
-+else
-+  as_candidate_shells=
-+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  case $as_dir in
-+	 /*)
-+	   for as_base in sh bash ksh sh5; do
-+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+	   done;;
-+       esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+      for as_shell in $as_candidate_shells $SHELL; do
-+	 # Try only shells that exist, to save several forks.
-+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+  CONFIG_SHELL=$as_shell
-+	       as_have_required=yes
-+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+  (exit $1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+  break
-+fi
-+
-+fi
-+
-+      done
-+
-+      if test "x$CONFIG_SHELL" != x; then
-+  for as_var in BASH_ENV ENV
-+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+        done
-+        export CONFIG_SHELL
-+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+    if test $as_have_required = no; then
-+  echo This script requires a shell more modern than all the
-+      echo shells that I found on your system.  Please install a
-+      echo modern shell, or manually run the script under such a
-+      echo shell if you do have one.
-+      { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+  (exit \$1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+  echo No shell found that supports shell functions.
-+  echo Please tell autoconf@gnu.org about your system,
-+  echo including any error possibly output before this
-+  echo message
-+}
-+
-+
-+
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+  # uniformly replaced by the line number.  The first 'sed' inserts a
-+  # line-number line after each line using $LINENO; the second 'sed'
-+  # does the real work.  The second script uses 'N' to pair each
-+  # line-number line with the line containing $LINENO, and appends
-+  # trailing '-' during substitution so that $LINENO is not a special
-+  # case at line end.
-+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-+  # E. McMahon (1931-1989) for sed's syntax.  :-)
-+  sed -n '
-+    p
-+    /[$]LINENO/=
-+  ' <$as_myself |
-+    sed '
-+      s/[$]LINENO.*/&-/
-+      t lineno
-+      b
-+      :lineno
-+      N
-+      :loop
-+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+      t loop
-+      s/-\n.*//
-+    ' >$as_me.lineno &&
-+  chmod +x "$as_me.lineno" ||
-+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+   { (exit 1); exit 1; }; }
-+
-+  # Don't try to exec as it changes $[0], causing all sort of problems
-+  # (the dirname of $[0] is not the place where we might find the
-+  # original and so on.  Autoconf is especially sensitive to this).
-+  . "./$as_me.lineno"
-+  # Exit status is that of the last command.
-+  exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
-+else
-+  as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+  case `echo 'x\c'` in
-+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-+  *)   ECHO_C='\c';;
-+  esac;;
-+*)
-+  ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+  rm -f conf$$.dir/conf$$.file
-+else
-+  rm -f conf$$.dir
-+  mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s='ln -s'
-+  # ... but there are two gotchas:
-+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+  # In both cases, we have to default to `cp -p'.
-+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+    as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s=ln
-+else
-+  as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+  as_mkdir_p=:
-+else
-+  test -d ./-p && rmdir ./-p
-+  as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+  as_test_x='test -x'
-+else
-+  if ls -dL / >/dev/null 2>&1; then
-+    as_ls_L_option=L
-+  else
-+    as_ls_L_option=
-+  fi
-+  as_test_x='
-+    eval sh -c '\''
-+      if test -d "$1"; then
-+        test -d "$1/.";
-+      else
-+	case $1 in
-+        -*)set "./$1";;
-+	esac;
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	???[sx]*):;;*)false;;esac;fi
-+    '\'' sh
-+  '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+  # Remove one level of quotation (which was required for Make).
-+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-+  ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X$1" = X--no-reexec; then
-+  # Discard the --no-reexec flag, and continue.
-+  shift
-+elif test "X$1" = X--fallback-echo; then
-+  # Avoid inline document here, it may be left over
-+  :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+  # Yippee, $echo works!
-+  :
-+else
-+  # Restart under the correct shell.
-+  exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+  # used as fallback echo
-+  shift
-+  cat <<EOF
-+$*
-+EOF
-+  exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+       echo_test_string=`eval $cmd` &&
-+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+    then
-+      break
-+    fi
-+  done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+   test "X$echo_testing_string" = "X$echo_test_string"; then
-+  :
-+else
-+  # The Solaris, AIX, and Digital Unix default echo programs unquote
-+  # backslashes.  This makes it impossible to quote backslashes using
-+  #   echo "$something" | sed 's/\\/\\\\/g'
-+  #
-+  # So, first we look for a working echo in the user's PATH.
-+
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for dir in $PATH /usr/ucb; do
-+    IFS="$lt_save_ifs"
-+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+       test "X$echo_testing_string" = "X$echo_test_string"; then
-+      echo="$dir/echo"
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+
-+  if test "X$echo" = Xecho; then
-+    # We didn't find a better echo, so look for alternatives.
-+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+       test "X$echo_testing_string" = "X$echo_test_string"; then
-+      # This shell has a builtin print -r that does the trick.
-+      echo='print -r'
-+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-+      # If we have ksh, try running configure again with it.
-+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+      export ORIGINAL_CONFIG_SHELL
-+      CONFIG_SHELL=/bin/ksh
-+      export CONFIG_SHELL
-+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-+    else
-+      # Try using printf.
-+      echo='printf %s\n'
-+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+	 test "X$echo_testing_string" = "X$echo_test_string"; then
-+	# Cool, printf works
-+	:
-+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+	   test "X$echo_testing_string" = 'X\t' &&
-+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+	   test "X$echo_testing_string" = "X$echo_test_string"; then
-+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+	export CONFIG_SHELL
-+	SHELL="$CONFIG_SHELL"
-+	export SHELL
-+	echo="$CONFIG_SHELL $0 --fallback-echo"
-+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+	   test "X$echo_testing_string" = 'X\t' &&
-+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+	   test "X$echo_testing_string" = "X$echo_test_string"; then
-+	echo="$CONFIG_SHELL $0 --fallback-echo"
-+      else
-+	# maybe with a smaller string...
-+	prev=:
-+
-+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+	  then
-+	    break
-+	  fi
-+	  prev="$cmd"
-+	done
-+
-+	if test "$prev" != 'sed 50q "$0"'; then
-+	  echo_test_string=`eval $prev`
-+	  export echo_test_string
-+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-+	else
-+	  # Oops.  We lost completely, so just stick with echo.
-+	  echo=echo
-+	fi
-+      fi
-+    fi
-+  fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-+fi
-+
-+
-+
-+
-+tagnames=${tagnames+${tagnames},}CXX
-+
-+tagnames=${tagnames+${tagnames},}F77
-+
-+exec 7<&0 </dev/null 6>&1
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_clean_files=
-+ac_config_libobj_dir=.
-+LIBOBJS=
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Identity of this package.
-+PACKAGE_NAME='ijs'
-+PACKAGE_TARNAME='ijs'
-+PACKAGE_VERSION='0.35'
-+PACKAGE_STRING='ijs 0.35'
-+PACKAGE_BUGREPORT='inkjet-list@linuxprinting.org'
-+
-+ac_unique_file="ijs.c"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#ifdef HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#ifdef HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#ifdef STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# ifdef HAVE_STDLIB_H
-+#  include <stdlib.h>
-+# endif
-+#endif
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-+#  include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#ifdef HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#ifdef HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#endif
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+INSTALL_PROGRAM
-+INSTALL_SCRIPT
-+INSTALL_DATA
-+PACKAGE
-+VERSION
-+ACLOCAL
-+AUTOCONF
-+AUTOMAKE
-+AUTOHEADER
-+MAKEINFO
-+AMTAR
-+install_sh
-+STRIP
-+INSTALL_STRIP_PROGRAM
-+AWK
-+SET_MAKE
-+IJS_MAJOR_VERSION
-+IJS_MINOR_VERSION
-+IJS_CURRENT_INTERFACE
-+IJS_INTERFACE_AGE
-+IJS_BINARY_AGE
-+IJS_VERSION
-+LT_RELEASE
-+LT_CURRENT
-+LT_REVISION
-+LT_AGE
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+DEPDIR
-+am__include
-+am__quote
-+AMDEP_TRUE
-+AMDEP_FALSE
-+AMDEPBACKSLASH
-+CCDEPMODE
-+SED
-+GREP
-+EGREP
-+LN_S
-+ECHO
-+AR
-+RANLIB
-+CPP
-+CXX
-+CXXFLAGS
-+ac_ct_CXX
-+CXXDEPMODE
-+CXXCPP
-+F77
-+FFLAGS
-+ac_ct_F77
-+LIBTOOL
-+LIBTOOL_DEPS
-+DB2PS
-+PS2PDF
-+SYSDEPS_WINDOWS_TRUE
-+SYSDEPS_WINDOWS_FALSE
-+IJS_CFLAGS
-+IJS_LIBS
-+IJS_DEPLIBS
-+ijs_cflags
-+ijs_libs
-+INCLUDES
-+LIBIJS_LIBS
-+LIBOBJS
-+LTLIBOBJS'
-+ac_subst_files=''
-+      ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CPP
-+CXX
-+CXXFLAGS
-+CCC
-+CXXCPP
-+F77
-+FFLAGS'
-+
-+
-+# Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
-+# The variables have the same names as the options, with
-+# dashes changed to underlines.
-+cache_file=/dev/null
-+exec_prefix=NONE
-+no_create=
-+no_recursion=
-+prefix=NONE
-+program_prefix=NONE
-+program_suffix=NONE
-+program_transform_name=s,x,x,
-+silent=
-+site=
-+srcdir=
-+verbose=
-+x_includes=NONE
-+x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
-+bindir='${exec_prefix}/bin'
-+sbindir='${exec_prefix}/sbin'
-+libexecdir='${exec_prefix}/libexec'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
-+sysconfdir='${prefix}/etc'
-+sharedstatedir='${prefix}/com'
-+localstatedir='${prefix}/var'
-+includedir='${prefix}/include'
-+oldincludedir='/usr/include'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-+
-+ac_prev=
-+ac_dashdash=
-+for ac_option
-+do
-+  # If the previous option needs an argument, assign it.
-+  if test -n "$ac_prev"; then
-+    eval $ac_prev=\$ac_option
-+    ac_prev=
-+    continue
-+  fi
-+
-+  case $ac_option in
-+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+  *)	ac_optarg=yes ;;
-+  esac
-+
-+  # Accept the important Cygnus configure options, so we can diagnose typos.
-+
-+  case $ac_dashdash$ac_option in
-+  --)
-+    ac_dashdash=yes ;;
-+
-+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-+    ac_prev=bindir ;;
-+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-+    bindir=$ac_optarg ;;
-+
-+  -build | --build | --buil | --bui | --bu)
-+    ac_prev=build_alias ;;
-+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-+    build_alias=$ac_optarg ;;
-+
-+  -cache-file | --cache-file | --cache-fil | --cache-fi \
-+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-+    ac_prev=cache_file ;;
-+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-+    cache_file=$ac_optarg ;;
-+
-+  --config-cache | -C)
-+    cache_file=config.cache ;;
-+
-+  -datadir | --datadir | --datadi | --datad)
-+    ac_prev=datadir ;;
-+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-+    datadir=$ac_optarg ;;
-+
-+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+  | --dataroo | --dataro | --datar)
-+    ac_prev=datarootdir ;;
-+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+    datarootdir=$ac_optarg ;;
-+
-+  -disable-* | --disable-*)
-+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+    eval enable_$ac_feature=no ;;
-+
-+  -docdir | --docdir | --docdi | --doc | --do)
-+    ac_prev=docdir ;;
-+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+    docdir=$ac_optarg ;;
-+
-+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+    ac_prev=dvidir ;;
-+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+    dvidir=$ac_optarg ;;
-+
-+  -enable-* | --enable-*)
-+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+    eval enable_$ac_feature=\$ac_optarg ;;
-+
-+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-+  | --exec | --exe | --ex)
-+    ac_prev=exec_prefix ;;
-+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-+  | --exec=* | --exe=* | --ex=*)
-+    exec_prefix=$ac_optarg ;;
-+
-+  -gas | --gas | --ga | --g)
-+    # Obsolete; use --with-gas.
-+    with_gas=yes ;;
-+
-+  -help | --help | --hel | --he | -h)
-+    ac_init_help=long ;;
-+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+    ac_init_help=recursive ;;
-+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+    ac_init_help=short ;;
-+
-+  -host | --host | --hos | --ho)
-+    ac_prev=host_alias ;;
-+  -host=* | --host=* | --hos=* | --ho=*)
-+    host_alias=$ac_optarg ;;
-+
-+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+    ac_prev=htmldir ;;
-+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+  | --ht=*)
-+    htmldir=$ac_optarg ;;
-+
-+  -includedir | --includedir | --includedi | --included | --include \
-+  | --includ | --inclu | --incl | --inc)
-+    ac_prev=includedir ;;
-+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-+  | --includ=* | --inclu=* | --incl=* | --inc=*)
-+    includedir=$ac_optarg ;;
-+
-+  -infodir | --infodir | --infodi | --infod | --info | --inf)
-+    ac_prev=infodir ;;
-+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-+    infodir=$ac_optarg ;;
-+
-+  -libdir | --libdir | --libdi | --libd)
-+    ac_prev=libdir ;;
-+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-+    libdir=$ac_optarg ;;
-+
-+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-+  | --libexe | --libex | --libe)
-+    ac_prev=libexecdir ;;
-+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-+  | --libexe=* | --libex=* | --libe=*)
-+    libexecdir=$ac_optarg ;;
-+
-+  -localedir | --localedir | --localedi | --localed | --locale)
-+    ac_prev=localedir ;;
-+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+    localedir=$ac_optarg ;;
-+
-+  -localstatedir | --localstatedir | --localstatedi | --localstated \
-+  | --localstate | --localstat | --localsta | --localst | --locals)
-+    ac_prev=localstatedir ;;
-+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-+    localstatedir=$ac_optarg ;;
-+
-+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-+    ac_prev=mandir ;;
-+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-+    mandir=$ac_optarg ;;
-+
-+  -nfp | --nfp | --nf)
-+    # Obsolete; use --without-fp.
-+    with_fp=no ;;
-+
-+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+  | --no-cr | --no-c | -n)
-+    no_create=yes ;;
-+
-+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-+    no_recursion=yes ;;
-+
-+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-+  | --oldin | --oldi | --old | --ol | --o)
-+    ac_prev=oldincludedir ;;
-+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-+    oldincludedir=$ac_optarg ;;
-+
-+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-+    ac_prev=prefix ;;
-+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-+    prefix=$ac_optarg ;;
-+
-+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-+  | --program-pre | --program-pr | --program-p)
-+    ac_prev=program_prefix ;;
-+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-+    program_prefix=$ac_optarg ;;
-+
-+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-+  | --program-suf | --program-su | --program-s)
-+    ac_prev=program_suffix ;;
-+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-+    program_suffix=$ac_optarg ;;
-+
-+  -program-transform-name | --program-transform-name \
-+  | --program-transform-nam | --program-transform-na \
-+  | --program-transform-n | --program-transform- \
-+  | --program-transform | --program-transfor \
-+  | --program-transfo | --program-transf \
-+  | --program-trans | --program-tran \
-+  | --progr-tra | --program-tr | --program-t)
-+    ac_prev=program_transform_name ;;
-+  -program-transform-name=* | --program-transform-name=* \
-+  | --program-transform-nam=* | --program-transform-na=* \
-+  | --program-transform-n=* | --program-transform-=* \
-+  | --program-transform=* | --program-transfor=* \
-+  | --program-transfo=* | --program-transf=* \
-+  | --program-trans=* | --program-tran=* \
-+  | --progr-tra=* | --program-tr=* | --program-t=*)
-+    program_transform_name=$ac_optarg ;;
-+
-+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+    ac_prev=pdfdir ;;
-+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+    pdfdir=$ac_optarg ;;
-+
-+  -psdir | --psdir | --psdi | --psd | --ps)
-+    ac_prev=psdir ;;
-+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+    psdir=$ac_optarg ;;
-+
-+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+  | -silent | --silent | --silen | --sile | --sil)
-+    silent=yes ;;
-+
-+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-+    ac_prev=sbindir ;;
-+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-+  | --sbi=* | --sb=*)
-+    sbindir=$ac_optarg ;;
-+
-+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-+  | --sharedst | --shareds | --shared | --share | --shar \
-+  | --sha | --sh)
-+    ac_prev=sharedstatedir ;;
-+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-+  | --sha=* | --sh=*)
-+    sharedstatedir=$ac_optarg ;;
-+
-+  -site | --site | --sit)
-+    ac_prev=site ;;
-+  -site=* | --site=* | --sit=*)
-+    site=$ac_optarg ;;
-+
-+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-+    ac_prev=srcdir ;;
-+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-+    srcdir=$ac_optarg ;;
-+
-+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-+  | --syscon | --sysco | --sysc | --sys | --sy)
-+    ac_prev=sysconfdir ;;
-+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-+    sysconfdir=$ac_optarg ;;
-+
-+  -target | --target | --targe | --targ | --tar | --ta | --t)
-+    ac_prev=target_alias ;;
-+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-+    target_alias=$ac_optarg ;;
-+
-+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-+    verbose=yes ;;
-+
-+  -version | --version | --versio | --versi | --vers | -V)
-+    ac_init_version=: ;;
-+
-+  -with-* | --with-*)
-+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid package name: $ac_package" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+    eval with_$ac_package=\$ac_optarg ;;
-+
-+  -without-* | --without-*)
-+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid package name: $ac_package" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+    eval with_$ac_package=no ;;
-+
-+  --x)
-+    # Obsolete; use --with-x.
-+    with_x=yes ;;
-+
-+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-+  | --x-incl | --x-inc | --x-in | --x-i)
-+    ac_prev=x_includes ;;
-+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-+    x_includes=$ac_optarg ;;
-+
-+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-+    ac_prev=x_libraries ;;
-+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-+    x_libraries=$ac_optarg ;;
-+
-+  -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+   { (exit 1); exit 1; }; }
-+    ;;
-+
-+  *=*)
-+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+   { (exit 1); exit 1; }; }
-+    eval $ac_envvar=\$ac_optarg
-+    export $ac_envvar ;;
-+
-+  *)
-+    # FIXME: should be removed in autoconf 3.0.
-+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-+    ;;
-+
-+  esac
-+done
-+
-+if test -n "$ac_prev"; then
-+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+  { echo "$as_me: error: missing argument to $ac_option" >&2
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# Be sure to have absolute directory names.
-+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+		datadir sysconfdir sharedstatedir localstatedir includedir \
-+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+		libdir localedir mandir
-+do
-+  eval ac_val=\$$ac_var
-+  case $ac_val in
-+    [\\/$]* | ?:[\\/]* )  continue;;
-+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-+  esac
-+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+   { (exit 1); exit 1; }; }
-+done
-+
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+  if test "x$build_alias" = x; then
-+    cross_compiling=maybe
-+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+    If a cross compiler is detected then cross compile mode will be used." >&2
-+  elif test "x$build_alias" != "x$host_alias"; then
-+    cross_compiling=yes
-+  fi
-+fi
-+
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-+
-+
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+  { echo "$as_me: error: Working directory cannot be determined" >&2
-+   { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+  { echo "$as_me: error: pwd does not report name of working directory" >&2
-+   { (exit 1); exit 1; }; }
-+
-+
-+# Find the source files, if location was not specified.
-+if test -z "$srcdir"; then
-+  ac_srcdir_defaulted=yes
-+  # Try the directory containing this script, then the parent directory.
-+  ac_confdir=`$as_dirname -- "$0" ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$0" : 'X\(//\)[^/]' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$0" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  srcdir=$ac_confdir
-+  if test ! -r "$srcdir/$ac_unique_file"; then
-+    srcdir=..
-+  fi
-+else
-+  ac_srcdir_defaulted=no
-+fi
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+   { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+   { (exit 1); exit 1; }; }
-+	pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+  srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+  eval ac_env_${ac_var}_value=\$${ac_var}
-+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+  # Omit some internal or obsolete options to make the list less imposing.
-+  # This message is too long to be a string in the A/UX 3.1 sh.
-+  cat <<_ACEOF
-+\`configure' configures ijs 0.35 to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE.  See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+  -h, --help              display this help and exit
-+      --help=short        display options specific to this package
-+      --help=recursive    display the short help of all the included packages
-+  -V, --version           display version information and exit
-+  -q, --quiet, --silent   do not print \`checking...' messages
-+      --cache-file=FILE   cache test results in FILE [disabled]
-+  -C, --config-cache      alias for \`--cache-file=config.cache'
-+  -n, --no-create         do not create output files
-+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-+
-+Installation directories:
-+  --prefix=PREFIX         install architecture-independent files in PREFIX
-+			  [$ac_default_prefix]
-+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-+			  [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+  --bindir=DIR           user executables [EPREFIX/bin]
-+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-+  --libexecdir=DIR       program executables [EPREFIX/libexec]
-+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-+  --libdir=DIR           object code libraries [EPREFIX/lib]
-+  --includedir=DIR       C header files [PREFIX/include]
-+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-+  --infodir=DIR          info documentation [DATAROOTDIR/info]
-+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-+  --mandir=DIR           man documentation [DATAROOTDIR/man]
-+  --docdir=DIR           documentation root [DATAROOTDIR/doc/ijs]
-+  --htmldir=DIR          html documentation [DOCDIR]
-+  --dvidir=DIR           dvi documentation [DOCDIR]
-+  --pdfdir=DIR           pdf documentation [DOCDIR]
-+  --psdir=DIR            ps documentation [DOCDIR]
-+_ACEOF
-+
-+  cat <<\_ACEOF
-+
-+Program names:
-+  --program-prefix=PREFIX            prepend PREFIX to installed program names
-+  --program-suffix=SUFFIX            append SUFFIX to installed program names
-+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-+
-+System types:
-+  --build=BUILD     configure for building on BUILD [guessed]
-+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+  case $ac_init_help in
-+     short | recursive ) echo "Configuration of ijs 0.35:";;
-+   esac
-+  cat <<\_ACEOF
-+
-+Optional Features:
-+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-+  --enable-shared[=PKGS]  build shared libraries [default=no]
-+  --enable-static[=PKGS]  build static libraries [default=yes]
-+  --enable-fast-install[=PKGS]
-+                          optimize for fast installation [default=yes]
-+  --disable-dependency-tracking Speeds up one-time builds
-+  --enable-dependency-tracking  Do not reject slow dependency extractors
-+  --disable-libtool-lock  avoid locking (might break parallel builds)
-+
-+Optional Packages:
-+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-+  --with-pic              try to use only PIC/non-PIC objects [default=use
-+                          both]
-+  --with-tags[=TAGS]      include additional configurations [automatic]
-+
-+Some influential environment variables:
-+  CC          C compiler command
-+  CFLAGS      C compiler flags
-+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-+              nonstandard directory <lib dir>
-+  LIBS        libraries to pass to the linker, e.g. -l<library>
-+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+              you have headers in a nonstandard directory <include dir>
-+  CPP         C preprocessor
-+  CXX         C++ compiler command
-+  CXXFLAGS    C++ compiler flags
-+  CXXCPP      C++ preprocessor
-+  F77         Fortran 77 compiler command
-+  FFLAGS      Fortran 77 compiler flags
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+Report bugs to <inkjet-list@linuxprinting.org>.
-+_ACEOF
-+ac_status=$?
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+  # If there are subdirs, report their specific --help.
-+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+    test -d "$ac_dir" || continue
-+    ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+  # A ".." for each directory in $ac_dir_suffix.
-+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+  case $ac_top_builddir_sub in
-+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+  esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+  .)  # We are building in place.
-+    ac_srcdir=.
-+    ac_top_srcdir=$ac_top_builddir_sub
-+    ac_abs_top_srcdir=$ac_pwd ;;
-+  [\\/]* | ?:[\\/]* )  # Absolute name.
-+    ac_srcdir=$srcdir$ac_dir_suffix;
-+    ac_top_srcdir=$srcdir
-+    ac_abs_top_srcdir=$srcdir ;;
-+  *) # Relative name.
-+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+    ac_top_srcdir=$ac_top_build_prefix$srcdir
-+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+    cd "$ac_dir" || { ac_status=$?; continue; }
-+    # Check for guested configure.
-+    if test -f "$ac_srcdir/configure.gnu"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+    elif test -f "$ac_srcdir/configure"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure" --help=recursive
-+    else
-+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+    fi || ac_status=$?
-+    cd "$ac_pwd" || { ac_status=$?; break; }
-+  done
-+fi
-+
-+test -n "$ac_init_help" && exit $ac_status
-+if $ac_init_version; then
-+  cat <<\_ACEOF
-+ijs configure 0.35
-+generated by GNU Autoconf 2.61
-+
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+  exit
-+fi
-+cat >config.log <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by ijs $as_me 0.35, which was
-+generated by GNU Autoconf 2.61.  Invocation command line was
-+
-+  $ $0 $@
-+
-+_ACEOF
-+exec 5>>config.log
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-+
-+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  echo "PATH: $as_dir"
-+done
-+IFS=$as_save_IFS
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+  for ac_arg
-+  do
-+    case $ac_arg in
-+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+    | -silent | --silent | --silen | --sile | --sil)
-+      continue ;;
-+    *\'*)
-+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+    esac
-+    case $ac_pass in
-+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+    2)
-+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+      if test $ac_must_keep_next = true; then
-+	ac_must_keep_next=false # Got value, back to normal.
-+      else
-+	case $ac_arg in
-+	  *=* | --config-cache | -C | -disable-* | --disable-* \
-+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+	  | -with-* | --with-* | -without-* | --without-* | --x)
-+	    case "$ac_configure_args0 " in
-+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+	    esac
-+	    ;;
-+	  -* ) ac_must_keep_next=true ;;
-+	esac
-+      fi
-+      ac_configure_args="$ac_configure_args '$ac_arg'"
-+      ;;
-+    esac
-+  done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log.  We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-+trap 'exit_status=$?
-+  # Save into config.log some information that might help in debugging.
-+  {
-+    echo
-+
-+    cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+    echo
-+    # The following way of writing the cache mishandles newlines in values,
-+(
-+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+    eval ac_val=\$$ac_var
-+    case $ac_val in #(
-+    *${as_nl}*)
-+      case $ac_var in #(
-+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+      esac
-+      case $ac_var in #(
-+      _ | IFS | as_nl) ;; #(
-+      *) $as_unset $ac_var ;;
-+      esac ;;
-+    esac
-+  done
-+  (set) 2>&1 |
-+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+    *${as_nl}ac_space=\ *)
-+      sed -n \
-+	"s/'\''/'\''\\\\'\'''\''/g;
-+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+      ;; #(
-+    *)
-+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+      ;;
-+    esac |
-+    sort
-+)
-+    echo
-+
-+    cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+    echo
-+    for ac_var in $ac_subst_vars
-+    do
-+      eval ac_val=\$$ac_var
-+      case $ac_val in
-+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+      esac
-+      echo "$ac_var='\''$ac_val'\''"
-+    done | sort
-+    echo
-+
-+    if test -n "$ac_subst_files"; then
-+      cat <<\_ASBOX
-+## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##
-+_ASBOX
-+      echo
-+      for ac_var in $ac_subst_files
-+      do
-+	eval ac_val=\$$ac_var
-+	case $ac_val in
-+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+	esac
-+	echo "$ac_var='\''$ac_val'\''"
-+      done | sort
-+      echo
-+    fi
-+
-+    if test -s confdefs.h; then
-+      cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+      echo
-+      cat confdefs.h
-+      echo
-+    fi
-+    test "$ac_signal" != 0 &&
-+      echo "$as_me: caught signal $ac_signal"
-+    echo "$as_me: exit $exit_status"
-+  } >&5
-+  rm -f core *.core core.conftest.* &&
-+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-+    exit $exit_status
-+' 0
-+for ac_signal in 1 2 13 15; do
-+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -f -r conftest* confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -n "$CONFIG_SITE"; then
-+  set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+  set x "$ac_default_prefix/share/config.site" \
-+	"$ac_default_prefix/etc/config.site"
-+fi
-+shift
-+for ac_site_file
-+do
-+  if test -r "$ac_site_file"; then
-+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+    sed 's/^/| /' "$ac_site_file" >&5
-+    . "$ac_site_file"
-+  fi
-+done
-+
-+if test -r "$cache_file"; then
-+  # Some versions of bash will fail to source /dev/null (special
-+  # files actually), so we avoid doing that.
-+  if test -f "$cache_file"; then
-+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+    case $cache_file in
-+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+      *)                      . "./$cache_file";;
-+    esac
-+  fi
-+else
-+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+  >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in $ac_precious_vars; do
-+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+  eval ac_new_set=\$ac_env_${ac_var}_set
-+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+  eval ac_new_val=\$ac_env_${ac_var}_value
-+  case $ac_old_set,$ac_new_set in
-+    set,)
-+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+      ac_cache_corrupted=: ;;
-+    ,set)
-+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+      ac_cache_corrupted=: ;;
-+    ,);;
-+    *)
-+      if test "x$ac_old_val" != "x$ac_new_val"; then
-+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-+echo "$as_me:   former value:  $ac_old_val" >&2;}
-+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-+echo "$as_me:   current value: $ac_new_val" >&2;}
-+	ac_cache_corrupted=:
-+      fi;;
-+  esac
-+  # Pass precious variables to config.status.
-+  if test "$ac_new_set" = set; then
-+    case $ac_new_val in
-+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+    *) ac_arg=$ac_var=$ac_new_val ;;
-+    esac
-+    case " $ac_configure_args " in
-+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+    esac
-+  fi
-+done
-+if $ac_cache_corrupted; then
-+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+
-+
-+
-+
-+IJS_LIBS="-lijs"
-+
-+IJS_MAJOR_VERSION=0
-+IJS_MINOR_VERSION=35
-+IJS_EXTRA_VERSION=
-+
-+IJS_CURRENT_INTERFACE=1
-+IJS_INTERFACE_AGE=1
-+IJS_BINARY_AGE=0
-+IJS_VERSION=0.35
-+
-+
-+
-+
-+
-+
-+
-+am__api_version="1.6"
-+ac_aux_dir=
-+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-+  if test -f "$ac_dir/install-sh"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install-sh -c"
-+    break
-+  elif test -f "$ac_dir/install.sh"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install.sh -c"
-+    break
-+  elif test -f "$ac_dir/shtool"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/shtool install -c"
-+    break
-+  fi
-+done
-+if test -z "$ac_aux_dir"; then
-+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-+
-+
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+  ./ | .// | /cC/* | \
-+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+  /usr/ucb/* ) ;;
-+  *)
-+    # OSF1 and SCO ODT 3.0 have their own names for install.
-+    # Don't use installbsd from OSF since it installs stuff as root
-+    # by default.
-+    for ac_prog in ginstall scoinst install; do
-+      for ac_exec_ext in '' $ac_executable_extensions; do
-+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+	  if test $ac_prog = install &&
-+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  elif test $ac_prog = install &&
-+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # program-specific install script used by HP pwplus--don't use.
-+	    :
-+	  else
-+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+	    break 3
-+	  fi
-+	fi
-+      done
-+    done
-+    ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL=$ac_cv_path_install
-+  else
-+    # As a last resort, use the slow shell script.  Don't cache a
-+    # value for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the value is a relative name.
-+    INSTALL=$ac_install_sh
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-+# Just in case
-+sleep 1
-+echo timestamp > conftest.file
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments.  Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-+   if test "$*" = "X"; then
-+      # -L didn't work.
-+      set X `ls -t $srcdir/configure conftest.file`
-+   fi
-+   rm -f conftest.file
-+   if test "$*" != "X $srcdir/configure conftest.file" \
-+      && test "$*" != "X conftest.file $srcdir/configure"; then
-+
-+      # If neither matched, then we have a broken ls.  This can happen
-+      # if, for instance, CONFIG_SHELL is bash and it inherits a
-+      # broken ls alias from the environment.  This has actually
-+      # happened.  Such a system could not be considered "sane".
-+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" >&2;}
-+   { (exit 1); exit 1; }; }
-+   fi
-+
-+   test "$2" = conftest.file
-+   )
-+then
-+   # Ok.
-+   :
-+else
-+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+test "$program_prefix" != NONE &&
-+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-+# Double any \ or $.  echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm -f conftest.sed
-+
-+
-+# expand $ac_aux_dir to an absolute path
-+am_aux_dir=`cd $ac_aux_dir && pwd`
-+
-+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-+# Use eval to expand $SHELL
-+if eval "$MISSING --run true"; then
-+  am_missing_run="$MISSING --run "
-+else
-+  am_missing_run=
-+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+fi
-+
-+for ac_prog in gawk mawk nawk awk
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AWK+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$AWK"; then
-+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_AWK="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AWK=$ac_cv_prog_AWK
-+if test -n "$AWK"; then
-+  { echo "$as_me:$LINENO: result: $AWK" >&5
-+echo "${ECHO_T}$AWK" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$AWK" && break
-+done
-+
-+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.make <<\_ACEOF
-+SHELL = /bin/sh
-+all:
-+	@echo '@@@%%%=$(MAKE)=@@@%%%'
-+_ACEOF
-+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-+case `${MAKE-make} -f conftest.make 2>/dev/null` in
-+  *@@@%%%=?*=@@@%%%*)
-+    eval ac_cv_prog_make_${ac_make}_set=yes;;
-+  *)
-+    eval ac_cv_prog_make_${ac_make}_set=no;;
-+esac
-+rm -f conftest.make
-+fi
-+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+  SET_MAKE=
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+  SET_MAKE="MAKE=${MAKE-make}"
-+fi
-+
-+ # test to see if srcdir already configured
-+if test "`cd $srcdir && pwd`" != "`pwd`" &&
-+   test -f $srcdir/config.status; then
-+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# Define the identity of the package.
-+ PACKAGE=ijs
-+ VERSION=0.35
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE "$PACKAGE"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define VERSION "$VERSION"
-+_ACEOF
-+
-+# Some tools Automake needs.
-+
-+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-+
-+
-+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-+
-+
-+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-+
-+
-+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-+
-+
-+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-+
-+
-+AMTAR=${AMTAR-"${am_missing_run}tar"}
-+
-+install_sh=${install_sh-"$am_aux_dir/install-sh"}
-+
-+# Installed binaries are usually stripped using `strip' when the user
-+# run `make install-strip'.  However `strip' might not be the right
-+# tool to use in cross-compilation environments, therefore Automake
-+# will honor the `STRIP' environment variable to overrule this program.
-+if test "$cross_compiling" != no; then
-+  if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$STRIP"; then
-+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+  { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+  ac_ct_STRIP=$STRIP
-+  # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_STRIP"; then
-+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_STRIP="strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_STRIP" = x; then
-+    STRIP=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    STRIP=$ac_ct_STRIP
-+  fi
-+else
-+  STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+fi
-+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-+
-+# We need awk for the "check" target.  The system "awk" is bad on
-+# some platforms.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+LT_RELEASE=$IJS_MAJOR_VERSION.$IJS_MINOR_VERSION
-+LT_CURRENT=$IJS_CURRENT_INTERFACE
-+LT_REVISION=$IJS_INTERFACE_AGE
-+LT_AGE=$IJS_BINARY_AGE
-+
-+
-+
-+
-+
-+
-+# Check whether --enable-shared was given.
-+if test "${enable_shared+set}" = set; then
-+  enableval=$enable_shared; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_shared=yes ;;
-+    no) enable_shared=no ;;
-+    *)
-+      enable_shared=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_shared=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_shared=no
-+fi
-+
-+
-+
-+# Check whether --enable-static was given.
-+if test "${enable_static+set}" = set; then
-+  enableval=$enable_static; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_static=yes ;;
-+    no) enable_static=no ;;
-+    *)
-+     enable_static=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_static=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_static=yes
-+fi
-+
-+
-+# Check whether --enable-fast-install was given.
-+if test "${enable_fast_install+set}" = set; then
-+  enableval=$enable_fast_install; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_fast_install=yes ;;
-+    no) enable_fast_install=no ;;
-+    *)
-+      enable_fast_install=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_fast_install=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_fast_install=yes
-+fi
-+
-+
-+# Make sure we can run config.sub.
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-+if test "${ac_cv_build+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
-+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+   { (exit 1); exit 1; }; }
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+   { (exit 1); exit 1; }; };;
-+esac
-+build=$ac_cv_build
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-+
-+
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-+if test "${ac_cv_host+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test "x$host_alias" = x; then
-+  ac_cv_host=$ac_cv_build
-+else
-+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+   { (exit 1); exit 1; }; };;
-+esac
-+host=$ac_cv_host
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-+
-+
-+rm -f .deps 2>/dev/null
-+mkdir .deps 2>/dev/null
-+if test -d .deps; then
-+  DEPDIR=.deps
-+else
-+  # MS-DOS does not allow filenames that begin with a dot.
-+  DEPDIR=_deps
-+fi
-+rmdir .deps 2>/dev/null
-+
-+
-+ac_config_commands="$ac_config_commands depfiles"
-+
-+
-+am_make=${MAKE-make}
-+cat > confinc << 'END'
-+doit:
-+	@echo done
-+END
-+# If we don't find an include directive, just comment out the code.
-+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-+am__include="#"
-+am__quote=
-+_am_result=none
-+# First try GNU make style include.
-+echo "include confinc" > confmf
-+# We grep out `Entering directory' and `Leaving directory'
-+# messages which can occur if `w' ends up in MAKEFLAGS.
-+# In particular we don't look at `^make:' because GNU make might
-+# be invoked under some other name (usually "gmake"), in which
-+# case it prints its new name instead of `make'.
-+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-+   am__include=include
-+   am__quote=
-+   _am_result=GNU
-+fi
-+# Now try BSD make style include.
-+if test "$am__include" = "#"; then
-+   echo '.include "confinc"' > confmf
-+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-+      am__include=.include
-+      am__quote="\""
-+      _am_result=BSD
-+   fi
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: result: $_am_result" >&5
-+echo "${ECHO_T}$_am_result" >&6; }
-+rm -f confinc confmf
-+
-+# Check whether --enable-dependency-tracking was given.
-+if test "${enable_dependency_tracking+set}" = set; then
-+  enableval=$enable_dependency_tracking;
-+fi
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+  am_depcomp="$ac_aux_dir/depcomp"
-+  AMDEPBACKSLASH='\'
-+fi
-+
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+  AMDEP_TRUE=
-+  AMDEP_FALSE='#'
-+else
-+  AMDEP_TRUE='#'
-+  AMDEP_FALSE=
-+fi
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+  ac_ct_CC=$CC
-+  # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+else
-+  CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+          if test -n "$ac_tool_prefix"; then
-+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  fi
-+fi
-+if test -z "$CC"; then
-+  # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+       ac_prog_rejected=yes
-+       continue
-+     fi
-+    ac_cv_prog_CC="cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+  # We found a bogon in the path, so make sure we never use it.
-+  set dummy $ac_cv_prog_CC
-+  shift
-+  if test $# != 0; then
-+    # We chose a different compiler from the bogus one.
-+    # However, it has the same basename, so the bogon will be chosen
-+    # first if we set CC to just the basename; use the full file name.
-+    shift
-+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+  fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+  if test -n "$ac_tool_prefix"; then
-+  for ac_prog in cl.exe
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CC" && break
-+  done
-+fi
-+if test -z "$CC"; then
-+  ac_ct_CC=$CC
-+  for ac_prog in cl.exe
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CC" && break
-+done
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort.  b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions.  Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+  esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link_default") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
-+do
-+  test -f "$ac_file" || continue
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-+	;;
-+    [ab].out )
-+	# We found the default executable, but exeext='' is most
-+	# certainly right.
-+	break;;
-+    *.* )
-+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+	then :; else
-+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+	fi
-+	# We set ac_cv_exeext here because the later test for it is not
-+	# safe: cross compilers may not add the suffix if given an `-o'
-+	# argument, so we may need to know it at that point already.
-+	# Even if this section looks crufty: it has the advantage of
-+	# actually working.
-+	break;;
-+    * )
-+	break;;
-+  esac
-+done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
-+else
-+  ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+   { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+
-+# Check that the compiler produces executables we can run.  If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+  if { ac_try='./$ac_file'
-+  { (case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+    cross_compiling=no
-+  else
-+    if test "$cross_compiling" = maybe; then
-+	cross_compiling=yes
-+    else
-+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+    fi
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check that the compiler produces executables we can run.  If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+  test -f "$ac_file" || continue
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+	  break;;
-+    * ) break;;
-+  esac
-+done
-+else
-+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-+if test "${ac_cv_objext+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  for ac_file in conftest.o conftest.obj conftest.*; do
-+  test -f "$ac_file" || continue;
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+       break;;
-+  esac
-+done
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_c_werror_flag=$ac_c_werror_flag
-+   ac_c_werror_flag=yes
-+   ac_cv_prog_cc_g=no
-+   CFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_c_werror_flag=$ac_save_c_werror_flag
-+	 CFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+  CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+  if test "$GCC" = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-g"
-+  fi
-+else
-+  if test "$GCC" = yes; then
-+    CFLAGS="-O2"
-+  else
-+    CFLAGS=
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-+   function prototypes and stuff, but not '\xHH' hex character constants.
-+   These don't provoke an error unfortunately, instead are silently treated
-+   as 'x'.  The following induces an error, until -std is added to get
-+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-+   array size at least.  It's necessary to write '\x00'==0 to get something
-+   that's true only with -std.  */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+   inside strings and character constants.  */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_c89=$ac_arg
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+  test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+  x)
-+    { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+  xno)
-+    { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+  *)
-+    CC="$CC $ac_cv_prog_cc_c89"
-+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CC"   am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CC_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CC_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+
-+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-+if test "${lt_cv_path_SED+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for lt_ac_prog in sed gsed; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-+      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+      fi
-+    done
-+  done
-+done
-+IFS=$as_save_IFS
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+  test ! -f $lt_ac_sed && continue
-+  cat /dev/null > conftest.in
-+  lt_ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+  # Check for GNU sed and select it if it is found.
-+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+    lt_cv_path_SED=$lt_ac_sed
-+    break
-+  fi
-+  while true; do
-+    cat conftest.in conftest.in >conftest.tmp
-+    mv conftest.tmp conftest.in
-+    cp conftest.in conftest.nl
-+    echo >>conftest.nl
-+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+    cmp -s conftest.out conftest.nl || break
-+    # 10000 chars as input seems more than enough
-+    test $lt_ac_count -gt 10 && break
-+    lt_ac_count=`expr $lt_ac_count + 1`
-+    if test $lt_ac_count -gt $lt_ac_max; then
-+      lt_ac_max=$lt_ac_count
-+      lt_cv_path_SED=$lt_ac_sed
-+    fi
-+  done
-+done
-+
-+fi
-+
-+SED=$lt_cv_path_SED
-+
-+{ echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_prog in grep ggrep; do
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+    # Check for GNU ac_path_GREP and select it if it is found.
-+  # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+  ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+  while :
-+  do
-+    cat "conftest.in" "conftest.in" >"conftest.tmp"
-+    mv "conftest.tmp" "conftest.in"
-+    cp "conftest.in" "conftest.nl"
-+    echo 'GREP' >> "conftest.nl"
-+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+    ac_count=`expr $ac_count + 1`
-+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+      # Best one so far, save it but keep looking for a better one
-+      ac_cv_path_GREP="$ac_path_GREP"
-+      ac_path_GREP_max=$ac_count
-+    fi
-+    # 10*(2^10) chars as input seems more than enough
-+    test $ac_count -gt 10 && break
-+  done
-+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+    $ac_path_GREP_found && break 3
-+  done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+  ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+   then ac_cv_path_EGREP="$GREP -E"
-+   else
-+     # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_prog in egrep; do
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+    # Check for GNU ac_path_EGREP and select it if it is found.
-+  # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+  ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+  while :
-+  do
-+    cat "conftest.in" "conftest.in" >"conftest.tmp"
-+    mv "conftest.tmp" "conftest.in"
-+    cp "conftest.in" "conftest.nl"
-+    echo 'EGREP' >> "conftest.nl"
-+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+    ac_count=`expr $ac_count + 1`
-+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+      # Best one so far, save it but keep looking for a better one
-+      ac_cv_path_EGREP="$ac_path_EGREP"
-+      ac_path_EGREP_max=$ac_count
-+    fi
-+    # 10*(2^10) chars as input seems more than enough
-+    test $ac_count -gt 10 && break
-+  done
-+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+    $ac_path_EGREP_found && break 3
-+  done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+  ac_cv_path_EGREP=$EGREP
-+fi
-+
-+
-+   fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+  with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+  # Check if gcc -print-prog-name=ld gives a path.
-+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+  case $host in
-+  *-*-mingw*)
-+    # gcc leaves a trailing carriage return which upsets mingw
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+  *)
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+  esac
-+  case $ac_prog in
-+    # Accept absolute paths.
-+    [\\/]* | ?:[\\/]*)
-+      re_direlt='/[^/][^/]*/\.\./'
-+      # Canonicalize the pathname of ld
-+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+      done
-+      test -z "$LD" && LD="$ac_prog"
-+      ;;
-+  "")
-+    # If it fails, then pretend we aren't using GCC.
-+    ac_prog=ld
-+    ;;
-+  *)
-+    # If it is relative, then search for the first ld in PATH.
-+    with_gnu_ld=unknown
-+    ;;
-+  esac
-+elif test "$with_gnu_ld" = yes; then
-+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$LD"; then
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for ac_dir in $PATH; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+      lt_cv_path_LD="$ac_dir/$ac_prog"
-+      # Check to see if the program is GNU ld.  I'd rather use --version,
-+      # but apparently some variants of GNU ld only accept -v.
-+      # Break only if it was the GNU/non-GNU ld that we prefer.
-+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+      *GNU* | *'with BFD'*)
-+	test "$with_gnu_ld" != no && break
-+	;;
-+      *)
-+	test "$with_gnu_ld" != yes && break
-+	;;
-+      esac
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+else
-+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+  { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+   { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+  lt_cv_prog_gnu_ld=yes
-+  ;;
-+*)
-+  lt_cv_prog_gnu_ld=no
-+  ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_ld_reload_flag='-r'
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+  darwin*)
-+    if test "$GCC" = yes; then
-+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+    else
-+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+    fi
-+    ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-+if test "${lt_cv_path_NM+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$NM"; then
-+  # Let the user override the test.
-+  lt_cv_path_NM="$NM"
-+else
-+  lt_nm_to_check="${ac_tool_prefix}nm"
-+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+    lt_nm_to_check="$lt_nm_to_check nm"
-+  fi
-+  for lt_tmp_nm in $lt_nm_to_check; do
-+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+      IFS="$lt_save_ifs"
-+      test -z "$ac_dir" && ac_dir=.
-+      tmp_nm="$ac_dir/$lt_tmp_nm"
-+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+	# Check to see if the nm accepts a BSD-compat flag.
-+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+	#   nm: unknown option "B" ignored
-+	# Tru64's nm complains that /dev/null is an invalid object file
-+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+	*/dev/null* | *'Invalid file or object type'*)
-+	  lt_cv_path_NM="$tmp_nm -B"
-+	  break
-+	  ;;
-+	*)
-+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+	  */dev/null*)
-+	    lt_cv_path_NM="$tmp_nm -p"
-+	    break
-+	    ;;
-+	  *)
-+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+	    continue # so that we can try to find one that supports BSD flags
-+	    ;;
-+	  esac
-+	  ;;
-+	esac
-+      fi
-+    done
-+    IFS="$lt_save_ifs"
-+  done
-+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-+NM="$lt_cv_path_NM"
-+
-+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix4* | aix5*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+beos*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+bsdi[45]*)
-+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+  lt_cv_file_magic_cmd='/usr/bin/file -L'
-+  lt_cv_file_magic_test_file=/shlib/libc.so
-+  ;;
-+
-+cygwin*)
-+  # func_win32_libid is a shell function defined in ltmain.sh
-+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+  lt_cv_file_magic_cmd='func_win32_libid'
-+  ;;
-+
-+mingw* | pw32*)
-+  # Base MSYS/MinGW do not provide the 'file' command needed by
-+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-+  # unless we find 'file', for example because we are cross-compiling.
-+  if ( file / ) >/dev/null 2>&1; then
-+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+    lt_cv_file_magic_cmd='func_win32_libid'
-+  else
-+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+    lt_cv_file_magic_cmd='$OBJDUMP -f'
-+  fi
-+  ;;
-+
-+darwin* | rhapsody*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+    case $host_cpu in
-+    i*86 )
-+      # Not sure whether the presence of OpenBSD here was a mistake.
-+      # Let's accept both of them until this is cleared up.
-+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-+      lt_cv_file_magic_cmd=/usr/bin/file
-+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+      ;;
-+    esac
-+  else
-+    lt_cv_deplibs_check_method=pass_all
-+  fi
-+  ;;
-+
-+gnu*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+hpux10.20* | hpux11*)
-+  lt_cv_file_magic_cmd=/usr/bin/file
-+  case $host_cpu in
-+  ia64*)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+    ;;
-+  hppa*64*)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+    ;;
-+  *)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+    ;;
-+  esac
-+  ;;
-+
-+interix[3-9]*)
-+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $LD in
-+  *-32|*"-32 ") libmagic=32-bit;;
-+  *-n32|*"-n32 ") libmagic=N32;;
-+  *-64|*"-64 ") libmagic=64-bit;;
-+  *) libmagic=never-match;;
-+  esac
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+netbsd*)
-+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+  else
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-+  fi
-+  ;;
-+
-+newos6*)
-+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-+  lt_cv_file_magic_cmd=/usr/bin/file
-+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+  ;;
-+
-+nto-qnx*)
-+  lt_cv_deplibs_check_method=unknown
-+  ;;
-+
-+openbsd*)
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-+  else
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+  fi
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+rdos*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+solaris*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  case $host_vendor in
-+  motorola)
-+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+    ;;
-+  ncr)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  sequent)
-+    lt_cv_file_magic_cmd='/bin/file'
-+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+    ;;
-+  sni)
-+    lt_cv_file_magic_cmd='/bin/file'
-+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-+    lt_cv_file_magic_test_file=/lib/libc.so
-+    ;;
-+  siemens)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  pc)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  esac
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+esac
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+
-+
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+  enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *ELF-32*)
-+      HPUX_IA64_MODE="32"
-+      ;;
-+    *ELF-64*)
-+      HPUX_IA64_MODE="64"
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+*-*-irix6*)
-+  # Find out which ABI we are using.
-+  echo '#line 4266 "configure"' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+   if test "$lt_cv_prog_gnu_ld" = yes; then
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *32-bit*)
-+      LD="${LD-ld} -melf32bsmip"
-+      ;;
-+    *N32*)
-+      LD="${LD-ld} -melf32bmipn32"
-+      ;;
-+    *64-bit*)
-+      LD="${LD-ld} -melf64bmip"
-+      ;;
-+    esac
-+   else
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *32-bit*)
-+      LD="${LD-ld} -32"
-+      ;;
-+    *N32*)
-+      LD="${LD-ld} -n32"
-+      ;;
-+    *64-bit*)
-+      LD="${LD-ld} -64"
-+      ;;
-+    esac
-+   fi
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-+s390*-*linux*|sparc*-*linux*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.o` in
-+    *32-bit*)
-+      case $host in
-+        x86_64-*kfreebsd*-gnu)
-+          LD="${LD-ld} -m elf_i386_fbsd"
-+          ;;
-+        x86_64-*linux*)
-+          LD="${LD-ld} -m elf_i386"
-+          ;;
-+        ppc64-*linux*|powerpc64-*linux*)
-+          LD="${LD-ld} -m elf32ppclinux"
-+          ;;
-+        s390x-*linux*)
-+          LD="${LD-ld} -m elf_s390"
-+          ;;
-+        sparc64-*linux*)
-+          LD="${LD-ld} -m elf32_sparc"
-+          ;;
-+      esac
-+      ;;
-+    *64-bit*)
-+      case $host in
-+        x86_64-*kfreebsd*-gnu)
-+          LD="${LD-ld} -m elf_x86_64_fbsd"
-+          ;;
-+        x86_64-*linux*)
-+          LD="${LD-ld} -m elf_x86_64"
-+          ;;
-+        ppc*-*linux*|powerpc*-*linux*)
-+          LD="${LD-ld} -m elf64ppc"
-+          ;;
-+        s390*-*linux*)
-+          LD="${LD-ld} -m elf64_s390"
-+          ;;
-+        sparc*-*linux*)
-+          LD="${LD-ld} -m elf64_sparc"
-+          ;;
-+      esac
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+*-*-sco3.2v5*)
-+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+  SAVE_CFLAGS="$CFLAGS"
-+  CFLAGS="$CFLAGS -belf"
-+  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+     cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  lt_cv_cc_needs_belf=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	lt_cv_cc_needs_belf=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+     ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
-+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+    CFLAGS="$SAVE_CFLAGS"
-+  fi
-+  ;;
-+sparc*-*solaris*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.o` in
-+    *64-bit*)
-+      case $lt_cv_prog_gnu_ld in
-+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+      *)    LD="${LD-ld} -64" ;;
-+      esac
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+  CPP=
-+fi
-+if test -z "$CPP"; then
-+  if test "${ac_cv_prog_CPP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+      # Double quotes because CPP needs to be expanded
-+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+    do
-+      ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  break
-+fi
-+
-+    done
-+    ac_cv_prog_CPP=$CPP
-+
-+fi
-+  CPP=$ac_cv_prog_CPP
-+else
-+  ac_cv_prog_CPP=$CPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  :
-+else
-+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_header_stdc=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_header_stdc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+  $EGREP "memchr" >/dev/null 2>&1; then
-+  :
-+else
-+  ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+  $EGREP "free" >/dev/null 2>&1; then
-+  :
-+else
-+  ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+  if test "$cross_compiling" = yes; then
-+  :
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ctype.h>
-+#include <stdlib.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+		   (('a' <= (c) && (c) <= 'i') \
-+		     || ('j' <= (c) && (c) <= 'r') \
-+		     || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+  int i;
-+  for (i = 0; i < 256; i++)
-+    if (XOR (islower (i), ISLOWER (i))
-+	|| toupper (i) != TOUPPER (i))
-+      return 2;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+  { (case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+  :
-+else
-+  echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+		  inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  eval "$as_ac_Header=yes"
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	eval "$as_ac_Header=no"
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+  cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+else
-+  # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_header_compiler=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <$ac_header>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  ac_header_preproc=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So?  What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+  yes:no: )
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+    ac_header_preproc=yes
-+    ;;
-+  no:yes:* )
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+    ( cat <<\_ASBOX
-+## -------------------------------------------- ##
-+## Report this to inkjet-list@linuxprinting.org ##
-+## -------------------------------------------- ##
-+_ASBOX
-+     ) | sed "s/^/$as_me: WARNING:     /" >&2
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  eval "$as_ac_Header=\$ac_header_preproc"
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+  cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+if test -z "$CXX"; then
-+  if test -n "$CCC"; then
-+    CXX=$CCC
-+  else
-+    if test -n "$ac_tool_prefix"; then
-+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CXX"; then
-+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CXX=$ac_cv_prog_CXX
-+if test -n "$CXX"; then
-+  { echo "$as_me:$LINENO: result: $CXX" >&5
-+echo "${ECHO_T}$CXX" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CXX" && break
-+  done
-+fi
-+if test -z "$CXX"; then
-+  ac_ct_CXX=$CXX
-+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CXX"; then
-+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CXX="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-+if test -n "$ac_ct_CXX"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-+echo "${ECHO_T}$ac_ct_CXX" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CXX" && break
-+done
-+
-+  if test "x$ac_ct_CXX" = x; then
-+    CXX="g++"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CXX=$ac_ct_CXX
-+  fi
-+fi
-+
-+  fi
-+fi
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-+GXX=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CXXFLAGS=${CXXFLAGS+set}
-+ac_save_CXXFLAGS=$CXXFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cxx_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-+   ac_cxx_werror_flag=yes
-+   ac_cv_prog_cxx_g=no
-+   CXXFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cxx_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CXXFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+	 CXXFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cxx_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-+if test "$ac_test_CXXFLAGS" = set; then
-+  CXXFLAGS=$ac_save_CXXFLAGS
-+elif test $ac_cv_prog_cxx_g = yes; then
-+  if test "$GXX" = yes; then
-+    CXXFLAGS="-g -O2"
-+  else
-+    CXXFLAGS="-g"
-+  fi
-+else
-+  if test "$GXX" = yes; then
-+    CXXFLAGS="-O2"
-+  else
-+    CXXFLAGS=
-+  fi
-+fi
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+depcc="$CXX"  am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CXX_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CXX_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CXX_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-+
-+
-+
-+
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+    (test "X$CXX" != "Xg++"))) ; then
-+  ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-+if test -z "$CXXCPP"; then
-+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+      # Double quotes because CXXCPP needs to be expanded
-+    for CXXCPP in "$CXX -E" "/lib/cpp"
-+    do
-+      ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  break
-+fi
-+
-+    done
-+    ac_cv_prog_CXXCPP=$CXXCPP
-+
-+fi
-+  CXXCPP=$ac_cv_prog_CXXCPP
-+else
-+  ac_cv_prog_CXXCPP=$CXXCPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-+echo "${ECHO_T}$CXXCPP" >&6; }
-+ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  :
-+else
-+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+fi
-+
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$F77"; then
-+  ac_cv_prog_F77="$F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+F77=$ac_cv_prog_F77
-+if test -n "$F77"; then
-+  { echo "$as_me:$LINENO: result: $F77" >&5
-+echo "${ECHO_T}$F77" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$F77" && break
-+  done
-+fi
-+if test -z "$F77"; then
-+  ac_ct_F77=$F77
-+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_F77"; then
-+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_F77="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_F77=$ac_cv_prog_ac_ct_F77
-+if test -n "$ac_ct_F77"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-+echo "${ECHO_T}$ac_ct_F77" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_F77" && break
-+done
-+
-+  if test "x$ac_ct_F77" = x; then
-+    F77=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    F77=$ac_ct_F77
-+  fi
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+rm -f a.out
-+
-+# If we don't use `.F' as extension, the preprocessor is not run on the
-+# input file.  (Note that this only needs to work for GNU compilers.)
-+ac_save_ext=$ac_ext
-+ac_ext=F
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-+ac_ext=$ac_save_ext
-+ac_test_FFLAGS=${FFLAGS+set}
-+ac_save_FFLAGS=$FFLAGS
-+FFLAGS=
-+{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_f77_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  FFLAGS=-g
-+cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_f77_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_prog_f77_g=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-+if test "$ac_test_FFLAGS" = set; then
-+  FFLAGS=$ac_save_FFLAGS
-+elif test $ac_cv_prog_f77_g = yes; then
-+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+    FFLAGS="-g -O2"
-+  else
-+    FFLAGS="-g"
-+  fi
-+else
-+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+    FFLAGS="-O2"
-+  else
-+    FFLAGS=
-+  fi
-+fi
-+
-+G77=`test $ac_compiler_gnu = yes && echo yes`
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+
-+# find the maximum length of command line arguments
-+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+    i=0
-+  teststring="ABCD"
-+
-+  case $build_os in
-+  msdosdjgpp*)
-+    # On DJGPP, this test can blow up pretty badly due to problems in libc
-+    # (any single argument exceeding 2000 bytes causes a buffer overrun
-+    # during glob expansion).  Even if it were fixed, the result of this
-+    # check would be larger than it should be.
-+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-+    ;;
-+
-+  gnu*)
-+    # Under GNU Hurd, this test is not required because there is
-+    # no limit to the length of command line arguments.
-+    # Libtool will interpret -1 as no limit whatsoever
-+    lt_cv_sys_max_cmd_len=-1;
-+    ;;
-+
-+  cygwin* | mingw*)
-+    # On Win9x/ME, this test blows up -- it succeeds, but takes
-+    # about 5 minutes as the teststring grows exponentially.
-+    # Worse, since 9x/ME are not pre-emptively multitasking,
-+    # you end up with a "frozen" computer, even though with patience
-+    # the test eventually succeeds (with a max line length of 256k).
-+    # Instead, let's just punt: use the minimum linelength reported by
-+    # all of the supported platforms: 8192 (on NT/2K/XP).
-+    lt_cv_sys_max_cmd_len=8192;
-+    ;;
-+
-+  amigaos*)
-+    # On AmigaOS with pdksh, this test takes hours, literally.
-+    # So we just punt and use a minimum line length of 8192.
-+    lt_cv_sys_max_cmd_len=8192;
-+    ;;
-+
-+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+    # This has been around since 386BSD, at least.  Likely further.
-+    if test -x /sbin/sysctl; then
-+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+    elif test -x /usr/sbin/sysctl; then
-+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+    else
-+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-+    fi
-+    # And add a safety zone
-+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+    ;;
-+
-+  interix*)
-+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+    lt_cv_sys_max_cmd_len=196608
-+    ;;
-+
-+  osf*)
-+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+    # nice to cause kernel panics so lets avoid the loop below.
-+    # First set a reasonable default.
-+    lt_cv_sys_max_cmd_len=16384
-+    #
-+    if test -x /sbin/sysconfig; then
-+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+      esac
-+    fi
-+    ;;
-+  sco3.2v5*)
-+    lt_cv_sys_max_cmd_len=102400
-+    ;;
-+  sysv5* | sco5v6* | sysv4.2uw2*)
-+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+    if test -n "$kargmax"; then
-+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-+    else
-+      lt_cv_sys_max_cmd_len=32768
-+    fi
-+    ;;
-+  *)
-+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-+    if test -n "$lt_cv_sys_max_cmd_len"; then
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+    else
-+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-+	       = "XX$teststring") >/dev/null 2>&1 &&
-+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+	      lt_cv_sys_max_cmd_len=$new_result &&
-+	      test $i != 17 # 1/2 MB should be enough
-+      do
-+        i=`expr $i + 1`
-+        teststring=$teststring$teststring
-+      done
-+      teststring=
-+      # Add a significant safety factor because C++ compilers can tack on massive
-+      # amounts of additional arguments before passing them to the linker.
-+      # It appears as though 1/2 is a usable value.
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+    fi
-+    ;;
-+  esac
-+
-+fi
-+
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6; }
-+fi
-+
-+
-+
-+
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+  symcode='[BCDT]'
-+  ;;
-+cygwin* | mingw* | pw32*)
-+  symcode='[ABCDGISTW]'
-+  ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+  if test "$host_cpu" = ia64; then
-+    symcode='[ABCDEGRST]'
-+  fi
-+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+  ;;
-+linux* | k*bsd*-gnu)
-+  if test "$host_cpu" = ia64; then
-+    symcode='[ABCDGIRSTW]'
-+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+  fi
-+  ;;
-+irix* | nonstopux*)
-+  symcode='[BCDEGRST]'
-+  ;;
-+osf*)
-+  symcode='[BCDEGQRST]'
-+  ;;
-+solaris*)
-+  symcode='[BDRT]'
-+  ;;
-+sco3.2v5*)
-+  symcode='[DT]'
-+  ;;
-+sysv4.2uw2*)
-+  symcode='[DT]'
-+  ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+  symcode='[ABDT]'
-+  ;;
-+sysv4)
-+  symcode='[DFNSTU]'
-+  ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+  ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+  symcode='[ABCDGIRSTW]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+  symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+  # Write the raw and C identifiers.
-+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+  # Check to see that the pipe works correctly.
-+  pipe_works=no
-+
-+  rm -f conftest*
-+  cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    # Now try to grab the symbols.
-+    nlist=conftest.nm
-+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s "$nlist"; then
-+      # Try sorting and uniquifying the output.
-+      if sort "$nlist" | uniq > "$nlist"T; then
-+	mv -f "$nlist"T "$nlist"
-+      else
-+	rm -f "$nlist"T
-+      fi
-+
-+      # Make sure that we snagged all the symbols we need.
-+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+	  cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+	  # Now generate the symbol file.
-+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+	  cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+  const char *name;
-+  lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+	  cat <<\EOF >> conftest.$ac_ext
-+  {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+	  # Now try linking the two files.
-+	  mv conftest.$ac_objext conftstm.$ac_objext
-+	  lt_save_LIBS="$LIBS"
-+	  lt_save_CFLAGS="$CFLAGS"
-+	  LIBS="conftstm.$ac_objext"
-+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-+	    pipe_works=yes
-+	  fi
-+	  LIBS="$lt_save_LIBS"
-+	  CFLAGS="$lt_save_CFLAGS"
-+	else
-+	  echo "cannot find nm_test_func in $nlist" >&5
-+	fi
-+      else
-+	echo "cannot find nm_test_var in $nlist" >&5
-+      fi
-+    else
-+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-+    fi
-+  else
-+    echo "$progname: failed program was:" >&5
-+    cat conftest.$ac_ext >&5
-+  fi
-+  rm -f conftest* conftst*
-+
-+  # Do not use the global_symbol_pipe unless it works.
-+  if test "$pipe_works" = yes; then
-+    break
-+  else
-+    lt_cv_sys_global_symbol_pipe=
-+  fi
-+done
-+
-+fi
-+
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+  lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+  { echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-+if test "${lt_cv_objdir+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+  lt_cv_objdir=.libs
-+else
-+  # MS-DOS does not allow filenames that begin with a dot.
-+  lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-+echo "${ECHO_T}$lt_cv_objdir" >&6; }
-+objdir=$lt_cv_objdir
-+
-+
-+
-+
-+
-+case $host_os in
-+aix3*)
-+  # AIX sometimes has problems with the GCC collect2 program.  For some
-+  # reason, if we set the COLLECT_NAMES environment variable, the problems
-+  # vanish in a puff of smoke.
-+  if test "X${COLLECT_NAMES+set}" != Xset; then
-+    COLLECT_NAMES=
-+    export COLLECT_NAMES
-+  fi
-+  ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting.  It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$AR"; then
-+  ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_AR="${ac_tool_prefix}ar"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+  { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+  ac_ct_AR=$AR
-+  # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_AR"; then
-+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_AR="ar"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_AR" = x; then
-+    AR="false"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    AR=$ac_ct_AR
-+  fi
-+else
-+  AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$RANLIB"; then
-+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+  ac_ct_RANLIB=$RANLIB
-+  # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_RANLIB"; then
-+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_RANLIB="ranlib"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_RANLIB" = x; then
-+    RANLIB=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    RANLIB=$ac_ct_RANLIB
-+  fi
-+else
-+  RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$STRIP"; then
-+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+  { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+  ac_ct_STRIP=$STRIP
-+  # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_STRIP"; then
-+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_STRIP="strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_STRIP" = x; then
-+    STRIP=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    STRIP=$ac_ct_STRIP
-+  fi
-+else
-+  STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+  case $host_os in
-+  openbsd*)
-+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+    ;;
-+  *)
-+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+    ;;
-+  esac
-+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $MAGIC_CMD in
-+[\\/*] |  ?:[\\/]*)
-+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+  ;;
-+*)
-+  lt_save_MAGIC_CMD="$MAGIC_CMD"
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+  for ac_dir in $ac_dummy; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/${ac_tool_prefix}file; then
-+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+      if test -n "$file_magic_test_file"; then
-+	case $deplibs_check_method in
-+	"file_magic "*)
-+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+	    $EGREP "$file_magic_regex" > /dev/null; then
-+	    :
-+	  else
-+	    cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such.  This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem.  Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+	  fi ;;
-+	esac
-+      fi
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+  MAGIC_CMD="$lt_save_MAGIC_CMD"
-+  ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+  if test -n "$ac_tool_prefix"; then
-+    { echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $MAGIC_CMD in
-+[\\/*] |  ?:[\\/]*)
-+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+  ;;
-+*)
-+  lt_save_MAGIC_CMD="$MAGIC_CMD"
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+  for ac_dir in $ac_dummy; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/file; then
-+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-+      if test -n "$file_magic_test_file"; then
-+	case $deplibs_check_method in
-+	"file_magic "*)
-+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+	    $EGREP "$file_magic_regex" > /dev/null; then
-+	    :
-+	  else
-+	    cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such.  This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem.  Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+	  fi ;;
-+	esac
-+      fi
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+  MAGIC_CMD="$lt_save_MAGIC_CMD"
-+  ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  else
-+    MAGIC_CMD=:
-+  fi
-+fi
-+
-+  fi
-+  ;;
-+esac
-+
-+enable_dlopen=no
-+enable_win32_dll=no
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+  enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+
-+# Check whether --with-pic was given.
-+if test "${with_pic+set}" = set; then
-+  withval=$with_pic; pic_mode="$withval"
-+else
-+  pic_mode=default
-+fi
-+
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+lt_save_CC="$CC"
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+objext=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}'
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+
-+lt_prog_compiler_no_builtin_flag=
-+
-+if test "$GCC" = yes; then
-+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_rtti_exceptions=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="-fno-rtti -fno-exceptions"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:6969: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:6973: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_rtti_exceptions=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-+else
-+    :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl=
-+lt_prog_compiler_pic=
-+lt_prog_compiler_static=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl='-Wl,'
-+    lt_prog_compiler_static='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static='-Bstatic'
-+      else
-+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic='-qnocommon'
-+         lt_prog_compiler_wl='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl='-Wl,'
-+	lt_prog_compiler_pic='-KPIC'
-+	lt_prog_compiler_static='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl='-Wl,'
-+	lt_prog_compiler_pic='-fpic'
-+	lt_prog_compiler_static='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic='-KPIC'
-+	  lt_prog_compiler_static='-Bstatic'
-+	  lt_prog_compiler_wl='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic='-KPIC'
-+	  lt_prog_compiler_static='-Bstatic'
-+	  lt_prog_compiler_wl=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl='-Qoption ld '
-+      lt_prog_compiler_pic='-PIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic='-Kconform_pic'
-+	lt_prog_compiler_static='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_can_build_shared=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic='-pic'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:7259: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:7263: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works" = xyes; then
-+    case $lt_prog_compiler_pic in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic=
-+     lt_prog_compiler_can_build_shared=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:7363: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:7367: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag=
-+  enable_shared_with_static_runtimes=no
-+  archive_cmds=
-+  archive_expsym_cmds=
-+  old_archive_From_new_cmds=
-+  old_archive_from_expsyms_cmds=
-+  export_dynamic_flag_spec=
-+  whole_archive_flag_spec=
-+  thread_safe_flag_spec=
-+  hardcode_libdir_flag_spec=
-+  hardcode_libdir_flag_spec_ld=
-+  hardcode_libdir_separator=
-+  hardcode_direct=no
-+  hardcode_minus_L=no
-+  hardcode_shlibpath_var=unsupported
-+  link_all_deplibs=unknown
-+  hardcode_automatic=no
-+  module_cmds=
-+  module_expsym_cmds=
-+  always_export_symbols=no
-+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      allow_undefined_flag=unsupported
-+      always_export_symbols=no
-+      enable_shared_with_static_runtimes=yes
-+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct=no
-+      hardcode_shlibpath_var=no
-+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec=
-+      export_dynamic_flag_spec=
-+      whole_archive_flag_spec=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag=unsupported
-+      always_export_symbols=yes
-+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds=''
-+      hardcode_direct=yes
-+      hardcode_libdir_separator=':'
-+      link_all_deplibs=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L=yes
-+  	  hardcode_libdir_flag_spec='-L$libdir'
-+  	  hardcode_libdir_separator=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag="-z nodefs"
-+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag=' ${wl}-bernotok'
-+	  allow_undefined_flag=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec='$convenience'
-+	  archive_cmds_need_lc=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec=' '
-+      allow_undefined_flag=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc=no
-+      hardcode_direct=no
-+      hardcode_automatic=yes
-+      hardcode_shlibpath_var=unsupported
-+      whole_archive_flag_spec=''
-+      link_all_deplibs=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct=yes
-+      hardcode_minus_L=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      hardcode_direct=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L=yes
-+      export_dynamic_flag_spec='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator=:
-+
-+	hardcode_direct=yes
-+	export_dynamic_flag_spec='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld='+b $libdir'
-+	  hardcode_direct=no
-+	  hardcode_shlibpath_var=no
-+	  ;;
-+	*)
-+	  hardcode_direct=yes
-+	  export_dynamic_flag_spec='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      link_all_deplibs=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct=yes
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct=yes
-+	hardcode_shlibpath_var=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+      allow_undefined_flag=unsupported
-+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag=' -expect_unresolved \*'
-+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag=' -expect_unresolved \*'
-+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_shlibpath_var=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_direct=yes
-+      hardcode_minus_L=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds='$CC -r -o $output$reload_objs'
-+	  hardcode_direct=no
-+        ;;
-+	motorola)
-+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var=no
-+      export_dynamic_flag_spec='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag='${wl}-z,text'
-+      archive_cmds_need_lc=no
-+      hardcode_shlibpath_var=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag='${wl}-z,text'
-+      allow_undefined_flag='${wl}-z,nodefs'
-+      archive_cmds_need_lc=no
-+      hardcode_shlibpath_var=no
-+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator=':'
-+      link_all_deplibs=yes
-+      export_dynamic_flag_spec='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    *)
-+      ld_shlibs=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6; }
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl
-+	pic_flag=$lt_prog_compiler_pic
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag
-+        allow_undefined_flag=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc=no
-+        else
-+	  archive_cmds_need_lc=yes
-+        fi
-+        allow_undefined_flag=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+if test "$GCC" = yes; then
-+  case $host_os in
-+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-+    *) lt_awk_arg="/^libraries:/" ;;
-+  esac
-+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+  # Ok, now we have the path, separated by spaces, we can step through it
-+  # and add multilib dir if necessary.
-+  lt_tmp_lt_search_path_spec=
-+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-+  for lt_sys_path in $lt_search_path_spec; do
-+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-+    else
-+      test -d "$lt_sys_path" && \
-+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-+    fi
-+  done
-+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-+BEGIN {RS=" "; FS="/|\n";} {
-+  lt_foo="";
-+  lt_count=0;
-+  for (lt_i = NF; lt_i > 0; lt_i--) {
-+    if ($lt_i != "" && $lt_i != ".") {
-+      if ($lt_i == "..") {
-+        lt_count++;
-+      } else {
-+        if (lt_count == 0) {
-+          lt_foo="/" $lt_i lt_foo;
-+        } else {
-+          lt_count--;
-+        }
-+      }
-+    }
-+  }
-+  if (lt_foo != "") { lt_freq[lt_foo]++; }
-+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-+}'`
-+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+   test -n "$runpath_var" || \
-+   test "X$hardcode_automatic" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-+     test "$hardcode_minus_L" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6; }
-+
-+if test "$hardcode_action" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+striplib=
-+old_striplib=
-+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+  case $host_os in
-+   darwin*)
-+       if test -n "$STRIP" ; then
-+         striplib="$STRIP -x"
-+         old_striplib="$STRIP -S"
-+         { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+       else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+       ;;
-+   *)
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+    ;;
-+  esac
-+fi
-+
-+if test "x$enable_dlopen" != xyes; then
-+  enable_dlopen=unknown
-+  enable_dlopen_self=unknown
-+  enable_dlopen_self_static=unknown
-+else
-+  lt_cv_dlopen=no
-+  lt_cv_dlopen_libs=
-+
-+  case $host_os in
-+  beos*)
-+    lt_cv_dlopen="load_add_on"
-+    lt_cv_dlopen_libs=
-+    lt_cv_dlopen_self=yes
-+    ;;
-+
-+  mingw* | pw32*)
-+    lt_cv_dlopen="LoadLibrary"
-+    lt_cv_dlopen_libs=
-+   ;;
-+
-+  cygwin*)
-+    lt_cv_dlopen="dlopen"
-+    lt_cv_dlopen_libs=
-+   ;;
-+
-+  darwin*)
-+  # if libdl is installed we need to link against it
-+    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dl_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+
-+    lt_cv_dlopen="dyld"
-+    lt_cv_dlopen_libs=
-+    lt_cv_dlopen_self=yes
-+
-+fi
-+
-+   ;;
-+
-+  *)
-+    { echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-+#define shl_load innocuous_shl_load
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char shl_load (); below.
-+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+    <limits.h> exists even on freestanding compilers.  */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef shl_load
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined __stub_shl_load || defined __stub___shl_load
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return shl_load ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_func_shl_load=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_func_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-+if test $ac_cv_func_shl_load = yes; then
-+  lt_cv_dlopen="shl_load"
-+else
-+  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+int
-+main ()
-+{
-+return shl_load ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dld_shl_load=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dld_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-+#define dlopen innocuous_dlopen
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char dlopen (); below.
-+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+    <limits.h> exists even on freestanding compilers.  */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef dlopen
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined __stub_dlopen || defined __stub___dlopen
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_func_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_func_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-+if test $ac_cv_func_dlopen = yes; then
-+  lt_cv_dlopen="dlopen"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dl_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lsvld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_svld_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_svld_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-+if test $ac_cv_lib_svld_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-+else
-+  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dld_link ();
-+int
-+main ()
-+{
-+return dld_link ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dld_dld_link=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dld_dld_link=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+    ;;
-+  esac
-+
-+  if test "x$lt_cv_dlopen" != xno; then
-+    enable_dlopen=yes
-+  else
-+    enable_dlopen=no
-+  fi
-+
-+  case $lt_cv_dlopen in
-+  dlopen)
-+    save_CPPFLAGS="$CPPFLAGS"
-+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+    save_LDFLAGS="$LDFLAGS"
-+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+    save_LIBS="$LIBS"
-+    LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  	  if test "$cross_compiling" = yes; then :
-+  lt_cv_dlopen_self=cross
-+else
-+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+  lt_status=$lt_dlunknown
-+  cat > conftest.$ac_ext <<EOF
-+#line 9712 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+#  define LT_DLGLOBAL		RTLD_GLOBAL
-+#else
-+#  ifdef DL_GLOBAL
-+#    define LT_DLGLOBAL		DL_GLOBAL
-+#  else
-+#    define LT_DLGLOBAL		0
-+#  endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+#  ifdef RTLD_LAZY
-+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-+#  else
-+#    ifdef DL_LAZY
-+#      define LT_DLLAZY_OR_NOW		DL_LAZY
-+#    else
-+#      ifdef RTLD_NOW
-+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-+#      else
-+#        ifdef DL_NOW
-+#          define LT_DLLAZY_OR_NOW	DL_NOW
-+#        else
-+#          define LT_DLLAZY_OR_NOW	0
-+#        endif
-+#      endif
-+#    endif
-+#  endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+  int status = $lt_dlunknown;
-+
-+  if (self)
-+    {
-+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+      /* dlclose (self); */
-+    }
-+  else
-+    puts (dlerror ());
-+
-+    exit (status);
-+}
-+EOF
-+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+    (./conftest; exit; ) >&5 2>/dev/null
-+    lt_status=$?
-+    case x$lt_status in
-+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-+    esac
-+  else :
-+    # compilation failed
-+    lt_cv_dlopen_self=no
-+  fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-+
-+    if test "x$lt_cv_dlopen_self" = xyes; then
-+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  	  if test "$cross_compiling" = yes; then :
-+  lt_cv_dlopen_self_static=cross
-+else
-+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+  lt_status=$lt_dlunknown
-+  cat > conftest.$ac_ext <<EOF
-+#line 9812 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+#  define LT_DLGLOBAL		RTLD_GLOBAL
-+#else
-+#  ifdef DL_GLOBAL
-+#    define LT_DLGLOBAL		DL_GLOBAL
-+#  else
-+#    define LT_DLGLOBAL		0
-+#  endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+#  ifdef RTLD_LAZY
-+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-+#  else
-+#    ifdef DL_LAZY
-+#      define LT_DLLAZY_OR_NOW		DL_LAZY
-+#    else
-+#      ifdef RTLD_NOW
-+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-+#      else
-+#        ifdef DL_NOW
-+#          define LT_DLLAZY_OR_NOW	DL_NOW
-+#        else
-+#          define LT_DLLAZY_OR_NOW	0
-+#        endif
-+#      endif
-+#    endif
-+#  endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+  int status = $lt_dlunknown;
-+
-+  if (self)
-+    {
-+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+      /* dlclose (self); */
-+    }
-+  else
-+    puts (dlerror ());
-+
-+    exit (status);
-+}
-+EOF
-+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+    (./conftest; exit; ) >&5 2>/dev/null
-+    lt_status=$?
-+    case x$lt_status in
-+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-+    esac
-+  else :
-+    # compilation failed
-+    lt_cv_dlopen_self_static=no
-+  fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
-+    fi
-+
-+    CPPFLAGS="$save_CPPFLAGS"
-+    LDFLAGS="$save_LDFLAGS"
-+    LIBS="$save_LIBS"
-+    ;;
-+  esac
-+
-+  case $lt_cv_dlopen_self in
-+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+  *) enable_dlopen_self=unknown ;;
-+  esac
-+
-+  case $lt_cv_dlopen_self_static in
-+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+  *) enable_dlopen_self_static=unknown ;;
-+  esac
-+fi
-+
-+
-+# Report which library types will actually be built
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+  test "$enable_shared" = yes && enable_static=no
-+  if test -n "$RANLIB"; then
-+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+    postinstall_cmds='$RANLIB $lib'
-+  fi
-+  ;;
-+
-+aix4* | aix5*)
-+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+    test "$enable_shared" = yes && enable_static=no
-+  fi
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler \
-+    CC \
-+    LD \
-+    lt_prog_compiler_wl \
-+    lt_prog_compiler_pic \
-+    lt_prog_compiler_static \
-+    lt_prog_compiler_no_builtin_flag \
-+    export_dynamic_flag_spec \
-+    thread_safe_flag_spec \
-+    whole_archive_flag_spec \
-+    enable_shared_with_static_runtimes \
-+    old_archive_cmds \
-+    old_archive_from_new_cmds \
-+    predep_objects \
-+    postdep_objects \
-+    predeps \
-+    postdeps \
-+    compiler_lib_search_path \
-+    archive_cmds \
-+    archive_expsym_cmds \
-+    postinstall_cmds \
-+    postuninstall_cmds \
-+    old_archive_from_expsyms_cmds \
-+    allow_undefined_flag \
-+    no_undefined_flag \
-+    export_symbols_cmds \
-+    hardcode_libdir_flag_spec \
-+    hardcode_libdir_flag_spec_ld \
-+    hardcode_libdir_separator \
-+    hardcode_automatic \
-+    module_cmds \
-+    module_expsym_cmds \
-+    lt_cv_prog_compiler_c_o \
-+    fix_srcfile_path \
-+    exclude_expsyms \
-+    include_expsyms; do
-+
-+    case $var in
-+    old_archive_cmds | \
-+    old_archive_from_new_cmds | \
-+    archive_cmds | \
-+    archive_expsym_cmds | \
-+    module_cmds | \
-+    module_expsym_cmds | \
-+    old_archive_from_expsyms_cmds | \
-+    export_symbols_cmds | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="${ofile}T"
-+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+  $rm -f "$cfgfile"
-+  { echo "$as_me:$LINENO: creating $ofile" >&5
-+echo "$as_me: creating $ofile" >&6;}
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds
-+archive_expsym_cmds=$lt_archive_expsym_cmds
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds
-+module_expsym_cmds=$lt_module_expsym_cmds
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms
-+
-+# ### END LIBTOOL CONFIG
-+
-+__EOF__
-+
-+
-+  case $host_os in
-+  aix3*)
-+    cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program.  For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+  COLLECT_NAMES=
-+  export COLLECT_NAMES
-+fi
-+EOF
-+    ;;
-+  esac
-+
-+  # We use sed instead of cat because bash on DJGPP gets confused if
-+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-+  # text mode, it properly converts lines to CR/LF.  This bash problem
-+  # is reportedly fixed, but why not run on old versions too?
-+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+  mv -f "$cfgfile" "$ofile" || \
-+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+  chmod +x "$ofile"
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+
-+# Check whether --with-tags was given.
-+if test "${with_tags+set}" = set; then
-+  withval=$with_tags; tagnames="$withval"
-+fi
-+
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+  if test ! -f "${ofile}"; then
-+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-+  fi
-+
-+  if test -z "$LTCC"; then
-+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+    if test -z "$LTCC"; then
-+      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-+    else
-+      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-+    fi
-+  fi
-+  if test -z "$LTCFLAGS"; then
-+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+  fi
-+
-+  # Extract list of available tagged configurations in $ofile.
-+  # Note that this assumes the entire list is on one line.
-+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+  for tagname in $tagnames; do
-+    IFS="$lt_save_ifs"
-+    # Check whether tagname contains only valid characters
-+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-+    "") ;;
-+    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-+echo "$as_me: error: invalid tag name: $tagname" >&2;}
-+   { (exit 1); exit 1; }; }
-+	;;
-+    esac
-+
-+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+    then
-+      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-+   { (exit 1); exit 1; }; }
-+    fi
-+
-+    # Update the list of available tags.
-+    if test -n "$tagname"; then
-+      echo appending configuration tag \"$tagname\" to $ofile
-+
-+      case $tagname in
-+      CXX)
-+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+	    (test "X$CXX" != "Xg++"))) ; then
-+	  ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+
-+archive_cmds_need_lc_CXX=no
-+allow_undefined_flag_CXX=
-+always_export_symbols_CXX=no
-+archive_expsym_cmds_CXX=
-+export_dynamic_flag_spec_CXX=
-+hardcode_direct_CXX=no
-+hardcode_libdir_flag_spec_CXX=
-+hardcode_libdir_flag_spec_ld_CXX=
-+hardcode_libdir_separator_CXX=
-+hardcode_minus_L_CXX=no
-+hardcode_shlibpath_var_CXX=unsupported
-+hardcode_automatic_CXX=no
-+module_cmds_CXX=
-+module_expsym_cmds_CXX=
-+link_all_deplibs_CXX=unknown
-+old_archive_cmds_CXX=$old_archive_cmds
-+no_undefined_flag_CXX=
-+whole_archive_flag_spec_CXX=
-+enable_shared_with_static_runtimes_CXX=no
-+
-+# Dependencies to place before and after the object being linked:
-+predep_objects_CXX=
-+postdep_objects_CXX=
-+predeps_CXX=
-+postdeps_CXX=
-+compiler_lib_search_path_CXX=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+objext_CXX=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+  $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+  lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+  $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+compiler_CXX=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-+else
-+  lt_prog_compiler_no_builtin_flag_CXX=
-+fi
-+
-+if test "$GXX" = yes; then
-+  # Set up default GNU C++ configuration
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+  with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+  # Check if gcc -print-prog-name=ld gives a path.
-+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+  case $host in
-+  *-*-mingw*)
-+    # gcc leaves a trailing carriage return which upsets mingw
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+  *)
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+  esac
-+  case $ac_prog in
-+    # Accept absolute paths.
-+    [\\/]* | ?:[\\/]*)
-+      re_direlt='/[^/][^/]*/\.\./'
-+      # Canonicalize the pathname of ld
-+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+      done
-+      test -z "$LD" && LD="$ac_prog"
-+      ;;
-+  "")
-+    # If it fails, then pretend we aren't using GCC.
-+    ac_prog=ld
-+    ;;
-+  *)
-+    # If it is relative, then search for the first ld in PATH.
-+    with_gnu_ld=unknown
-+    ;;
-+  esac
-+elif test "$with_gnu_ld" = yes; then
-+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$LD"; then
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for ac_dir in $PATH; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+      lt_cv_path_LD="$ac_dir/$ac_prog"
-+      # Check to see if the program is GNU ld.  I'd rather use --version,
-+      # but apparently some variants of GNU ld only accept -v.
-+      # Break only if it was the GNU/non-GNU ld that we prefer.
-+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+      *GNU* | *'with BFD'*)
-+	test "$with_gnu_ld" != no && break
-+	;;
-+      *)
-+	test "$with_gnu_ld" != yes && break
-+	;;
-+      esac
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+else
-+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+  { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+   { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+  lt_cv_prog_gnu_ld=yes
-+  ;;
-+*)
-+  lt_cv_prog_gnu_ld=no
-+  ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+
-+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+  # archiving commands below assume that GNU ld is being used.
-+  if test "$with_gnu_ld" = yes; then
-+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+    #     investigate it a little bit more. (MM)
-+    wlarc='${wl}'
-+
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+	grep 'no-whole-archive' > /dev/null; then
-+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+    else
-+      whole_archive_flag_spec_CXX=
-+    fi
-+  else
-+    with_gnu_ld=no
-+    wlarc=
-+
-+    # A generic and very simple default shared library creation
-+    # command for GNU C++ for the case where it uses the native
-+    # linker, instead of GNU ld.  If possible, this setting should
-+    # overridden to take advantage of the native linker features on
-+    # the platform it is being used on.
-+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+  fi
-+
-+  # Commands to make compiler produce verbose output that lists
-+  # what "hidden" libraries, object files and flags are used when
-+  # linking a shared library.
-+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+  GXX=no
-+  with_gnu_ld=no
-+  wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+ld_shlibs_CXX=yes
-+case $host_os in
-+  aix3*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  aix4* | aix5*)
-+    if test "$host_cpu" = ia64; then
-+      # On IA64, the linker does run time linking by default, so we don't
-+      # have to do anything special.
-+      aix_use_runtimelinking=no
-+      exp_sym_flag='-Bexport'
-+      no_entry_flag=""
-+    else
-+      aix_use_runtimelinking=no
-+
-+      # Test if we are trying to use run time linking or normal
-+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+      # need to do runtime linking.
-+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	for ld_flag in $LDFLAGS; do
-+	  case $ld_flag in
-+	  *-brtl*)
-+	    aix_use_runtimelinking=yes
-+	    break
-+	    ;;
-+	  esac
-+	done
-+	;;
-+      esac
-+
-+      exp_sym_flag='-bexport'
-+      no_entry_flag='-bnoentry'
-+    fi
-+
-+    # When large executables or shared objects are built, AIX ld can
-+    # have problems creating the table of contents.  If linking a library
-+    # or program results in "error TOC overflow" add -mminimal-toc to
-+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+    archive_cmds_CXX=''
-+    hardcode_direct_CXX=yes
-+    hardcode_libdir_separator_CXX=':'
-+    link_all_deplibs_CXX=yes
-+
-+    if test "$GXX" = yes; then
-+      case $host_os in aix4.[012]|aix4.[012].*)
-+      # We only want to do this on AIX 4.2 and lower, the check
-+      # below for broken collect2 doesn't work under 4.3+
-+	collect2name=`${CC} -print-prog-name=collect2`
-+	if test -f "$collect2name" && \
-+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	then
-+	  # We have reworked collect2
-+	  :
-+	else
-+	  # We have old collect2
-+	  hardcode_direct_CXX=unsupported
-+	  # It fails to find uninstalled libraries when the uninstalled
-+	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+	  # to unsupported forces relinking
-+	  hardcode_minus_L_CXX=yes
-+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-+	  hardcode_libdir_separator_CXX=
-+	fi
-+	;;
-+      esac
-+      shared_flag='-shared'
-+      if test "$aix_use_runtimelinking" = yes; then
-+	shared_flag="$shared_flag "'${wl}-G'
-+      fi
-+    else
-+      # not using gcc
-+      if test "$host_cpu" = ia64; then
-+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+	# chokes on -Wl,-G. The following line is correct:
-+	shared_flag='-G'
-+      else
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag='${wl}-G'
-+	else
-+	  shared_flag='${wl}-bM:SRE'
-+	fi
-+      fi
-+    fi
-+
-+    # It seems that -bexpall does not export symbols beginning with
-+    # underscore (_), so it is better to generate a list of symbols to export.
-+    always_export_symbols_CXX=yes
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # Warning - without using the other runtime loading flags (-brtl),
-+      # -berok will link without error, but may produce a broken library.
-+      allow_undefined_flag_CXX='-berok'
-+      # Determine the default libpath from the value encoded in an empty executable.
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+     else
-+      if test "$host_cpu" = ia64; then
-+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-+	allow_undefined_flag_CXX="-z nodefs"
-+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+      else
-+	# Determine the default libpath from the value encoded in an empty executable.
-+	cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	# Warning - without using the other run time loading flags,
-+	# -berok will link without error, but may produce a broken library.
-+	no_undefined_flag_CXX=' ${wl}-bernotok'
-+	allow_undefined_flag_CXX=' ${wl}-berok'
-+	# Exported symbols can be pulled into shared objects from archives
-+	whole_archive_flag_spec_CXX='$convenience'
-+	archive_cmds_need_lc_CXX=yes
-+	# This is similar to how AIX traditionally builds its shared libraries.
-+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+      fi
-+    fi
-+    ;;
-+
-+  beos*)
-+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+      allow_undefined_flag_CXX=unsupported
-+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+      # support --undefined.  This deserves some investigation.  FIXME
-+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+    ;;
-+
-+  chorus*)
-+    case $cc_basename in
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+
-+  cygwin* | mingw* | pw32*)
-+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+    # as there is no search path for DLLs.
-+    hardcode_libdir_flag_spec_CXX='-L$libdir'
-+    allow_undefined_flag_CXX=unsupported
-+    always_export_symbols_CXX=no
-+    enable_shared_with_static_runtimes_CXX=yes
-+
-+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      # If the export-symbols file already is a .def file (1st line
-+      # is EXPORTS), use it as is; otherwise, prepend...
-+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	cp $export_symbols $output_objdir/$soname.def;
-+      else
-+	echo EXPORTS > $output_objdir/$soname.def;
-+	cat $export_symbols >> $output_objdir/$soname.def;
-+      fi~
-+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+  ;;
-+      darwin* | rhapsody*)
-+        case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+        esac
-+      archive_cmds_need_lc_CXX=no
-+      hardcode_direct_CXX=no
-+      hardcode_automatic_CXX=yes
-+      hardcode_shlibpath_var_CXX=unsupported
-+      whole_archive_flag_spec_CXX=''
-+      link_all_deplibs_CXX=yes
-+
-+    if test "$GXX" = yes ; then
-+      lt_int_apple_cc_single_mod=no
-+      output_verbose_link_cmd='echo'
-+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-+       lt_int_apple_cc_single_mod=yes
-+      fi
-+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      else
-+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+        fi
-+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          else
-+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          fi
-+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_CXX=no
-+          ;;
-+      esac
-+      fi
-+        ;;
-+
-+  dgux*)
-+    case $cc_basename in
-+      ec++*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      ghcx*)
-+	# Green Hills C++ Compiler
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  freebsd[12]*)
-+    # C++ shared libraries reported to be fairly broken before switch to ELF
-+    ld_shlibs_CXX=no
-+    ;;
-+  freebsd-elf*)
-+    archive_cmds_need_lc_CXX=no
-+    ;;
-+  freebsd* | dragonfly*)
-+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+    # conventions
-+    ld_shlibs_CXX=yes
-+    ;;
-+  gnu*)
-+    ;;
-+  hpux9*)
-+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+    hardcode_libdir_separator_CXX=:
-+    export_dynamic_flag_spec_CXX='${wl}-E'
-+    hardcode_direct_CXX=yes
-+    hardcode_minus_L_CXX=yes # Not in the search PATH,
-+				# but as the default
-+				# location of the library.
-+
-+    case $cc_basename in
-+    CC*)
-+      # FIXME: insert proper C++ library support
-+      ld_shlibs_CXX=no
-+      ;;
-+    aCC*)
-+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      # Commands to make compiler produce verbose output that lists
-+      # what "hidden" libraries, object files and flags are used when
-+      # linking a shared library.
-+      #
-+      # There doesn't appear to be a way to prevent this compiler from
-+      # explicitly linking system object files so we need to strip them
-+      # from the output so that they don't get included in the library
-+      # dependencies.
-+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+      ;;
-+    *)
-+      if test "$GXX" = yes; then
-+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+        # FIXME: insert proper C++ library support
-+        ld_shlibs_CXX=no
-+      fi
-+      ;;
-+    esac
-+    ;;
-+  hpux10*|hpux11*)
-+    if test $with_gnu_ld = no; then
-+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_CXX=:
-+
-+      case $host_cpu in
-+      hppa*64*|ia64*) ;;
-+      *)
-+	export_dynamic_flag_spec_CXX='${wl}-E'
-+        ;;
-+      esac
-+    fi
-+    case $host_cpu in
-+    hppa*64*|ia64*)
-+      hardcode_direct_CXX=no
-+      hardcode_shlibpath_var_CXX=no
-+      ;;
-+    *)
-+      hardcode_direct_CXX=yes
-+      hardcode_minus_L_CXX=yes # Not in the search PATH,
-+					      # but as the default
-+					      # location of the library.
-+      ;;
-+    esac
-+
-+    case $cc_basename in
-+      CC*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      aCC*)
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	esac
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes; then
-+	  if test $with_gnu_ld = no; then
-+	    case $host_cpu in
-+	    hppa*64*)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    ia64*)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    *)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    esac
-+	  fi
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  interix[3-9]*)
-+    hardcode_direct_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+    export_dynamic_flag_spec_CXX='${wl}-E'
-+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+    # Instead, shared libraries are loaded at an image base (0x10000000 by
-+    # default) and relocated if they conflict, which is a slow very memory
-+    # consuming and fragmenting process.  To avoid this, we pick a random,
-+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+    ;;
-+  irix5* | irix6*)
-+    case $cc_basename in
-+      CC*)
-+	# SGI C++
-+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-+	# necessary to make sure instantiated templates are included
-+	# in the archive.
-+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+	;;
-+      *)
-+	if test "$GXX" = yes; then
-+	  if test "$with_gnu_ld" = no; then
-+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	  else
-+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+	  fi
-+	fi
-+	link_all_deplibs_CXX=yes
-+	;;
-+    esac
-+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+    hardcode_libdir_separator_CXX=:
-+    ;;
-+  linux* | k*bsd*-gnu)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+	;;
-+      icpc*)
-+	# Intel C++
-+	with_gnu_ld=yes
-+	# version 8.0 and above of icpc choke on multiply defined symbols
-+	# if we add $predep_objects and $postdep_objects, however 7.1 and
-+	# earlier do not add the objects themselves.
-+	case `$CC -V 2>&1` in
-+	*"Version 7."*)
-+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+	  ;;
-+	*)  # Version 8.0 or newer
-+	  tmp_idyn=
-+	  case $host_cpu in
-+	    ia64*) tmp_idyn=' -i_dynamic';;
-+	  esac
-+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+	  ;;
-+	esac
-+	archive_cmds_need_lc_CXX=no
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+	;;
-+      pgCC*)
-+        # Portland Group C++ compiler
-+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+        ;;
-+      cxx*)
-+	# Compaq C++
-+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+	runpath_var=LD_RUN_PATH
-+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C++ 5.9
-+	  no_undefined_flag_CXX=' -zdefs'
-+	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
-+	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+
-+	  # Not sure whether something based on
-+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-+	  # would be better.
-+	  output_verbose_link_cmd='echo'
-+
-+	  # Archives containing C++ object files must be created using
-+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-+	  # necessary to make sure instantiated templates are included
-+	  # in the archive.
-+	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+	  ;;
-+	esac
-+	;;
-+    esac
-+    ;;
-+  lynxos*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  m88k*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  mvs*)
-+    case $cc_basename in
-+      cxx*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  netbsd*)
-+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+      wlarc=
-+      hardcode_libdir_flag_spec_CXX='-R$libdir'
-+      hardcode_direct_CXX=yes
-+      hardcode_shlibpath_var_CXX=no
-+    fi
-+    # Workaround some broken pre-1.5 toolchains
-+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+    ;;
-+  openbsd2*)
-+    # C++ shared libraries are fairly broken
-+    ld_shlibs_CXX=no
-+    ;;
-+  openbsd*)
-+    if test -f /usr/libexec/ld.so; then
-+      hardcode_direct_CXX=yes
-+      hardcode_shlibpath_var_CXX=no
-+      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+	export_dynamic_flag_spec_CXX='${wl}-E'
-+	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      fi
-+      output_verbose_link_cmd='echo'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+    ;;
-+  osf3*)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+	;;
-+      RCC*)
-+	# Rational C++ 2.4.1
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      cxx*)
-+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	  hardcode_libdir_separator_CXX=:
-+
-+	  # Commands to make compiler produce verbose output that lists
-+	  # what "hidden" libraries, object files and flags are used when
-+	  # linking a shared library.
-+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  osf4* | osf5*)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Archives containing C++ object files must be created using
-+	# the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-+	;;
-+      RCC*)
-+	# Rational C++ 2.4.1
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      cxx*)
-+	allow_undefined_flag_CXX=' -expect_unresolved \*'
-+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+	  echo "-hidden">> $lib.exp~
-+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+	  $rm $lib.exp'
-+
-+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	  hardcode_libdir_separator_CXX=:
-+
-+	  # Commands to make compiler produce verbose output that lists
-+	  # what "hidden" libraries, object files and flags are used when
-+	  # linking a shared library.
-+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  psos*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  sunos4*)
-+    case $cc_basename in
-+      CC*)
-+	# Sun C++ 4.x
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      lcc*)
-+	# Lucid
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  solaris*)
-+    case $cc_basename in
-+      CC*)
-+	# Sun C++ 4.2, 5.x and Centerline C++
-+        archive_cmds_need_lc_CXX=yes
-+	no_undefined_flag_CXX=' -zdefs'
-+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	hardcode_libdir_flag_spec_CXX='-R$libdir'
-+	hardcode_shlibpath_var_CXX=no
-+	case $host_os in
-+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-+	  *)
-+	    # The compiler driver will combine and reorder linker options,
-+	    # but understands `-z linker_flag'.
-+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-+	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-+	    ;;
-+	esac
-+	link_all_deplibs_CXX=yes
-+
-+	output_verbose_link_cmd='echo'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-+	# necessary to make sure instantiated templates are included
-+	# in the archive.
-+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+	;;
-+      gcx*)
-+	# Green Hills C++ Compiler
-+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+	# The C++ compiler must be used to create the archive.
-+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+	;;
-+      *)
-+	# GNU C++ compiler with Solaris linker
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	    # Commands to make compiler produce verbose output that lists
-+	    # what "hidden" libraries, object files and flags are used when
-+	    # linking a shared library.
-+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+	  else
-+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+	    # platform.
-+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	    # Commands to make compiler produce verbose output that lists
-+	    # what "hidden" libraries, object files and flags are used when
-+	    # linking a shared library.
-+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+	  fi
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-+	  case $host_os in
-+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-+	  *)
-+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	    ;;
-+	  esac
-+	fi
-+	;;
-+    esac
-+    ;;
-+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+    no_undefined_flag_CXX='${wl}-z,text'
-+    archive_cmds_need_lc_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    runpath_var='LD_RUN_PATH'
-+
-+    case $cc_basename in
-+      CC*)
-+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+      *)
-+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+    esac
-+    ;;
-+  sysv5* | sco3.2v5* | sco5v6*)
-+    # Note: We can NOT use -z defs as we might desire, because we do not
-+    # link with -lc, and that would cause any symbols used from libc to
-+    # always be unresolved, which means just about no library would
-+    # ever link correctly.  If we're not using GNU ld we use -z text
-+    # though, which does catch some bad symbols but isn't as heavy-handed
-+    # as -z defs.
-+    # For security reasons, it is highly recommended that you always
-+    # use absolute paths for naming shared libraries, and exclude the
-+    # DT_RUNPATH tag from executables and libraries.  But doing so
-+    # requires that you compile everything twice, which is a pain.
-+    # So that behaviour is only enabled if SCOABSPATH is set to a
-+    # non-empty value in the environment.  Most likely only useful for
-+    # creating official distributions of packages.
-+    # This is a hack until libtool officially supports absolute path
-+    # names for shared libraries.
-+    no_undefined_flag_CXX='${wl}-z,text'
-+    allow_undefined_flag_CXX='${wl}-z,nodefs'
-+    archive_cmds_need_lc_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+    hardcode_libdir_separator_CXX=':'
-+    link_all_deplibs_CXX=yes
-+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-+    runpath_var='LD_RUN_PATH'
-+
-+    case $cc_basename in
-+      CC*)
-+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+      *)
-+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+    esac
-+    ;;
-+  tandem*)
-+    case $cc_basename in
-+      NCC*)
-+	# NonStop-UX NCC 3.20
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  vxworks*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  *)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+GCC_CXX="$GXX"
-+LD_CXX="$LD"
-+
-+
-+cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+  Foo (void) { a = 0; }
-+private:
-+  int a;
-+};
-+EOF
-+
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # Parse the compiler output and extract the necessary
-+  # objects, libraries and library flags.
-+
-+  # Sentinel used to keep track of whether or not we are before
-+  # the conftest object file.
-+  pre_test_object_deps_done=no
-+
-+  # The `*' in the case matches for architectures that use `case' in
-+  # $output_verbose_cmd can trigger glob expansion during the loop
-+  # eval without this substitution.
-+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+  for p in `eval $output_verbose_link_cmd`; do
-+    case $p in
-+
-+    -L* | -R* | -l*)
-+       # Some compilers place space between "-{L,R}" and the path.
-+       # Remove the space.
-+       if test $p = "-L" \
-+	  || test $p = "-R"; then
-+	 prev=$p
-+	 continue
-+       else
-+	 prev=
-+       fi
-+
-+       if test "$pre_test_object_deps_done" = no; then
-+	 case $p in
-+	 -L* | -R*)
-+	   # Internal compiler library paths should come after those
-+	   # provided the user.  The postdeps already come after the
-+	   # user supplied libs so there is no need to process them.
-+	   if test -z "$compiler_lib_search_path_CXX"; then
-+	     compiler_lib_search_path_CXX="${prev}${p}"
-+	   else
-+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-+	   fi
-+	   ;;
-+	 # The "-l" case would never come before the object being
-+	 # linked, so don't bother handling this case.
-+	 esac
-+       else
-+	 if test -z "$postdeps_CXX"; then
-+	   postdeps_CXX="${prev}${p}"
-+	 else
-+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-+	 fi
-+       fi
-+       ;;
-+
-+    *.$objext)
-+       # This assumes that the test object file only shows up
-+       # once in the compiler output.
-+       if test "$p" = "conftest.$objext"; then
-+	 pre_test_object_deps_done=yes
-+	 continue
-+       fi
-+
-+       if test "$pre_test_object_deps_done" = no; then
-+	 if test -z "$predep_objects_CXX"; then
-+	   predep_objects_CXX="$p"
-+	 else
-+	   predep_objects_CXX="$predep_objects_CXX $p"
-+	 fi
-+       else
-+	 if test -z "$postdep_objects_CXX"; then
-+	   postdep_objects_CXX="$p"
-+	 else
-+	   postdep_objects_CXX="$postdep_objects_CXX $p"
-+	 fi
-+       fi
-+       ;;
-+
-+    *) ;; # Ignore the rest.
-+
-+    esac
-+  done
-+
-+  # Clean up.
-+  rm -f a.out a.exe
-+else
-+  echo "libtool.m4: error: problem compiling CXX test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+# PORTME: override above test on systems where it is broken
-+case $host_os in
-+interix[3-9]*)
-+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+  # hack all around it, let's just trust "g++" to DTRT.
-+  predep_objects_CXX=
-+  postdep_objects_CXX=
-+  postdeps_CXX=
-+  ;;
-+
-+linux*)
-+  case `$CC -V 2>&1 | sed 5q` in
-+  *Sun\ C*)
-+    # Sun C++ 5.9
-+    #
-+    # The more standards-conforming stlport4 library is
-+    # incompatible with the Cstd library. Avoid specifying
-+    # it if it's in CXXFLAGS. Ignore libCrun as
-+    # -library=stlport4 depends on it.
-+    case " $CXX $CXXFLAGS " in
-+    *" -library=stlport4 "*)
-+      solaris_use_stlport4=yes
-+      ;;
-+    esac
-+    if test "$solaris_use_stlport4" != yes; then
-+      postdeps_CXX='-library=Cstd -library=Crun'
-+    fi
-+    ;;
-+  esac
-+  ;;
-+
-+solaris*)
-+  case $cc_basename in
-+  CC*)
-+    # The more standards-conforming stlport4 library is
-+    # incompatible with the Cstd library. Avoid specifying
-+    # it if it's in CXXFLAGS. Ignore libCrun as
-+    # -library=stlport4 depends on it.
-+    case " $CXX $CXXFLAGS " in
-+    *" -library=stlport4 "*)
-+      solaris_use_stlport4=yes
-+      ;;
-+    esac
-+
-+    # Adding this requires a known-good setup of shared libraries for
-+    # Sun compiler versions before 5.6, else PIC objects from an old
-+    # archive will be linked into the output, leading to subtle bugs.
-+    if test "$solaris_use_stlport4" != yes; then
-+      postdeps_CXX='-library=Cstd -library=Crun'
-+    fi
-+    ;;
-+  esac
-+  ;;
-+esac
-+
-+
-+case " $postdeps_CXX " in
-+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-+esac
-+
-+lt_prog_compiler_wl_CXX=
-+lt_prog_compiler_pic_CXX=
-+lt_prog_compiler_static_CXX=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  # C++ specific cases for pic, static, wl, etc.
-+  if test "$GXX" = yes; then
-+    lt_prog_compiler_wl_CXX='-Wl,'
-+    lt_prog_compiler_static_CXX='-static'
-+
-+    case $host_os in
-+    aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_CXX='-Bstatic'
-+      fi
-+      ;;
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+    mingw* | cygwin* | os2* | pw32*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+      ;;
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_CXX='-fno-common'
-+      ;;
-+    *djgpp*)
-+      # DJGPP does not support shared libraries at all
-+      lt_prog_compiler_pic_CXX=
-+      ;;
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_CXX=-Kconform_pic
-+      fi
-+      ;;
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	;;
-+      *)
-+	lt_prog_compiler_pic_CXX='-fPIC'
-+	;;
-+      esac
-+      ;;
-+    *)
-+      lt_prog_compiler_pic_CXX='-fPIC'
-+      ;;
-+    esac
-+  else
-+    case $host_os in
-+      aix4* | aix5*)
-+	# All AIX code is PIC.
-+	if test "$host_cpu" = ia64; then
-+	  # AIX 5 now supports IA64 processor
-+	  lt_prog_compiler_static_CXX='-Bstatic'
-+	else
-+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-+	fi
-+	;;
-+      chorus*)
-+	case $cc_basename in
-+	cxch68*)
-+	  # Green Hills C++ Compiler
-+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+	  ;;
-+	esac
-+	;;
-+       darwin*)
-+         # PIC is the default on this platform
-+         # Common symbols not allowed in MH_DYLIB files
-+         case $cc_basename in
-+           xlc*)
-+           lt_prog_compiler_pic_CXX='-qnocommon'
-+           lt_prog_compiler_wl_CXX='-Wl,'
-+           ;;
-+         esac
-+       ;;
-+      dgux*)
-+	case $cc_basename in
-+	  ec++*)
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    ;;
-+	  ghcx*)
-+	    # Green Hills C++ Compiler
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      freebsd* | dragonfly*)
-+	# FreeBSD uses GNU C++
-+	;;
-+      hpux9* | hpux10* | hpux11*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+	    if test "$host_cpu" != ia64; then
-+	      lt_prog_compiler_pic_CXX='+Z'
-+	    fi
-+	    ;;
-+	  aCC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+	    case $host_cpu in
-+	    hppa*64*|ia64*)
-+	      # +Z the default
-+	      ;;
-+	    *)
-+	      lt_prog_compiler_pic_CXX='+Z'
-+	      ;;
-+	    esac
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      interix*)
-+	# This is c89, which is MS Visual C++ (no shared libs)
-+	# Anyone wants to do a port?
-+	;;
-+      irix5* | irix6* | nonstopux*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    # CC pic flag -KPIC is the default.
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      linux* | k*bsd*-gnu)
-+	case $cc_basename in
-+	  KCC*)
-+	    # KAI C++ Compiler
-+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-+	    lt_prog_compiler_pic_CXX='-fPIC'
-+	    ;;
-+	  icpc* | ecpc*)
-+	    # Intel C++
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-static'
-+	    ;;
-+	  pgCC*)
-+	    # Portland Group C++ compiler.
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-fpic'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	  cxx*)
-+	    # Compaq C++
-+	    # Make sure the PIC flag is empty.  It appears that all Alpha
-+	    # Linux and Compaq Tru64 Unix objects are PIC.
-+	    lt_prog_compiler_pic_CXX=
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    ;;
-+	  *)
-+	    case `$CC -V 2>&1 | sed 5q` in
-+	    *Sun\ C*)
-+	      # Sun C++ 5.9
-+	      lt_prog_compiler_pic_CXX='-KPIC'
-+	      lt_prog_compiler_static_CXX='-Bstatic'
-+	      lt_prog_compiler_wl_CXX='-Qoption ld '
-+	      ;;
-+	    esac
-+	    ;;
-+	esac
-+	;;
-+      lynxos*)
-+	;;
-+      m88k*)
-+	;;
-+      mvs*)
-+	case $cc_basename in
-+	  cxx*)
-+	    lt_prog_compiler_pic_CXX='-W c,exportall'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      netbsd*)
-+	;;
-+      osf3* | osf4* | osf5*)
-+	case $cc_basename in
-+	  KCC*)
-+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-+	    ;;
-+	  RCC*)
-+	    # Rational C++ 2.4.1
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  cxx*)
-+	    # Digital/Compaq C++
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    # Make sure the PIC flag is empty.  It appears that all Alpha
-+	    # Linux and Compaq Tru64 Unix objects are PIC.
-+	    lt_prog_compiler_pic_CXX=
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      psos*)
-+	;;
-+      solaris*)
-+	case $cc_basename in
-+	  CC*)
-+	    # Sun C++ 4.2, 5.x and Centerline C++
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    lt_prog_compiler_wl_CXX='-Qoption ld '
-+	    ;;
-+	  gcx*)
-+	    # Green Hills C++ Compiler
-+	    lt_prog_compiler_pic_CXX='-PIC'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      sunos4*)
-+	case $cc_basename in
-+	  CC*)
-+	    # Sun C++ 4.x
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	  lcc*)
-+	    # Lucid
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      tandem*)
-+	case $cc_basename in
-+	  NCC*)
-+	    # NonStop-UX NCC 3.20
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	esac
-+	;;
-+      vxworks*)
-+	;;
-+      *)
-+	lt_prog_compiler_can_build_shared_CXX=no
-+	;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_CXX"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_CXX=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:12232: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:12236: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_CXX=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-+    case $lt_prog_compiler_pic_CXX in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_CXX=
-+     lt_prog_compiler_can_build_shared_CXX=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_CXX=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_CXX=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_CXX=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_CXX=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_CXX=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_CXX=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:12336: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:12340: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_CXX=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  case $host_os in
-+  aix4* | aix5*)
-+    # If we're using GNU nm, then we don't want the "-C" option.
-+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+    else
-+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+    fi
-+    ;;
-+  pw32*)
-+    export_symbols_cmds_CXX="$ltdll_cmds"
-+  ;;
-+  cygwin* | mingw*)
-+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+  ;;
-+  *)
-+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  ;;
-+  esac
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_CXX" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_CXX=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_CXX in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_CXX
-+	pic_flag=$lt_prog_compiler_pic_CXX
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-+        allow_undefined_flag_CXX=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_CXX=no
-+        else
-+	  archive_cmds_need_lc_CXX=yes
-+        fi
-+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_CXX=
-+if test -n "$hardcode_libdir_flag_spec_CXX" || \
-+   test -n "$runpath_var_CXX" || \
-+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_CXX" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-+     test "$hardcode_minus_L_CXX" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_CXX=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_CXX=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_CXX=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-+
-+if test "$hardcode_action_CXX" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_CXX \
-+    CC_CXX \
-+    LD_CXX \
-+    lt_prog_compiler_wl_CXX \
-+    lt_prog_compiler_pic_CXX \
-+    lt_prog_compiler_static_CXX \
-+    lt_prog_compiler_no_builtin_flag_CXX \
-+    export_dynamic_flag_spec_CXX \
-+    thread_safe_flag_spec_CXX \
-+    whole_archive_flag_spec_CXX \
-+    enable_shared_with_static_runtimes_CXX \
-+    old_archive_cmds_CXX \
-+    old_archive_from_new_cmds_CXX \
-+    predep_objects_CXX \
-+    postdep_objects_CXX \
-+    predeps_CXX \
-+    postdeps_CXX \
-+    compiler_lib_search_path_CXX \
-+    archive_cmds_CXX \
-+    archive_expsym_cmds_CXX \
-+    postinstall_cmds_CXX \
-+    postuninstall_cmds_CXX \
-+    old_archive_from_expsyms_cmds_CXX \
-+    allow_undefined_flag_CXX \
-+    no_undefined_flag_CXX \
-+    export_symbols_cmds_CXX \
-+    hardcode_libdir_flag_spec_CXX \
-+    hardcode_libdir_flag_spec_ld_CXX \
-+    hardcode_libdir_separator_CXX \
-+    hardcode_automatic_CXX \
-+    module_cmds_CXX \
-+    module_expsym_cmds_CXX \
-+    lt_cv_prog_compiler_c_o_CXX \
-+    fix_srcfile_path_CXX \
-+    exclude_expsyms_CXX \
-+    include_expsyms_CXX; do
-+
-+    case $var in
-+    old_archive_cmds_CXX | \
-+    old_archive_from_new_cmds_CXX | \
-+    archive_cmds_CXX | \
-+    archive_expsym_cmds_CXX | \
-+    module_cmds_CXX | \
-+    module_expsym_cmds_CXX | \
-+    old_archive_from_expsyms_cmds_CXX | \
-+    export_symbols_cmds_CXX | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_CXX
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_CXX
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_CXX
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_CXX
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_CXX
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_CXX
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_CXX
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_CXX
-+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_CXX
-+module_expsym_cmds=$lt_module_expsym_cmds_CXX
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_CXX
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_CXX
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_CXX
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_CXX
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_CXX
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_CXX
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_CXX
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_CXX
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_CXX
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_CXX
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_CXX
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_CXX
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_CXX
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      F77)
-+	if test -n "$F77" && test "X$F77" != "Xno"; then
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+
-+
-+archive_cmds_need_lc_F77=no
-+allow_undefined_flag_F77=
-+always_export_symbols_F77=no
-+archive_expsym_cmds_F77=
-+export_dynamic_flag_spec_F77=
-+hardcode_direct_F77=no
-+hardcode_libdir_flag_spec_F77=
-+hardcode_libdir_flag_spec_ld_F77=
-+hardcode_libdir_separator_F77=
-+hardcode_minus_L_F77=no
-+hardcode_automatic_F77=no
-+module_cmds_F77=
-+module_expsym_cmds_F77=
-+link_all_deplibs_F77=unknown
-+old_archive_cmds_F77=$old_archive_cmds
-+no_undefined_flag_F77=
-+whole_archive_flag_spec_F77=
-+enable_shared_with_static_runtimes_F77=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+objext_F77=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="\
-+      subroutine t
-+      return
-+      end
-+"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="\
-+      program t
-+      end
-+"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+compiler_F77=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+  test "$enable_shared" = yes && enable_static=no
-+  if test -n "$RANLIB"; then
-+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+    postinstall_cmds='$RANLIB $lib'
-+  fi
-+  ;;
-+aix4* | aix5*)
-+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+    test "$enable_shared" = yes && enable_static=no
-+  fi
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+GCC_F77="$G77"
-+LD_F77="$LD"
-+
-+lt_prog_compiler_wl_F77=
-+lt_prog_compiler_pic_F77=
-+lt_prog_compiler_static_F77=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl_F77='-Wl,'
-+    lt_prog_compiler_static_F77='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_F77='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared_F77=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_F77=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_F77='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic_F77='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      else
-+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic_F77='-qnocommon'
-+         lt_prog_compiler_wl_F77='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_F77='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl_F77='-Wl,'
-+	lt_prog_compiler_pic_F77='-KPIC'
-+	lt_prog_compiler_static_F77='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl_F77='-Wl,'
-+	lt_prog_compiler_pic_F77='-fpic'
-+	lt_prog_compiler_static_F77='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl_F77='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static_F77='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic_F77='-KPIC'
-+	  lt_prog_compiler_static_F77='-Bstatic'
-+	  lt_prog_compiler_wl_F77='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic_F77='-KPIC'
-+	  lt_prog_compiler_static_F77='-Bstatic'
-+	  lt_prog_compiler_wl_F77=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl_F77='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl_F77='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl_F77='-Qoption ld '
-+      lt_prog_compiler_pic_F77='-PIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic_F77='-Kconform_pic'
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_can_build_shared_F77=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic_F77='-pic'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared_F77=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_F77"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_F77=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:13898: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:13902: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_F77=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
-+    case $lt_prog_compiler_pic_F77 in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_F77=
-+     lt_prog_compiler_can_build_shared_F77=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_F77=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_F77=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_F77=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_F77=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_F77=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_F77=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:14002: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:14006: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_F77=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag_F77=
-+  enable_shared_with_static_runtimes_F77=no
-+  archive_cmds_F77=
-+  archive_expsym_cmds_F77=
-+  old_archive_From_new_cmds_F77=
-+  old_archive_from_expsyms_cmds_F77=
-+  export_dynamic_flag_spec_F77=
-+  whole_archive_flag_spec_F77=
-+  thread_safe_flag_spec_F77=
-+  hardcode_libdir_flag_spec_F77=
-+  hardcode_libdir_flag_spec_ld_F77=
-+  hardcode_libdir_separator_F77=
-+  hardcode_direct_F77=no
-+  hardcode_minus_L_F77=no
-+  hardcode_shlibpath_var_F77=unsupported
-+  link_all_deplibs_F77=unknown
-+  hardcode_automatic_F77=no
-+  module_cmds_F77=
-+  module_expsym_cmds_F77=
-+  always_export_symbols_F77=no
-+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms_F77=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs_F77=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec_F77=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs_F77=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag_F77=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      allow_undefined_flag_F77=unsupported
-+      always_export_symbols_F77=no
-+      enable_shared_with_static_runtimes_F77=yes
-+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec_F77='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs_F77=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs_F77=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs_F77=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs_F77" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec_F77=
-+      export_dynamic_flag_spec_F77=
-+      whole_archive_flag_spec_F77=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag_F77=unsupported
-+      always_export_symbols_F77=yes
-+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L_F77=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct_F77=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds_F77=''
-+      hardcode_direct_F77=yes
-+      hardcode_libdir_separator_F77=':'
-+      link_all_deplibs_F77=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct_F77=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L_F77=yes
-+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-+  	  hardcode_libdir_separator_F77=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols_F77=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag_F77='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag_F77="-z nodefs"
-+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag_F77=' ${wl}-bernotok'
-+	  allow_undefined_flag_F77=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec_F77='$convenience'
-+	  archive_cmds_need_lc_F77=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec_F77=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec_F77=' '
-+      allow_undefined_flag_F77=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds_F77='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes_F77=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc_F77=no
-+      hardcode_direct_F77=no
-+      hardcode_automatic_F77=yes
-+      hardcode_shlibpath_var_F77=unsupported
-+      whole_archive_flag_spec_F77=''
-+      link_all_deplibs_F77=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_F77=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_F77=yes
-+      hardcode_minus_L_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      hardcode_direct_F77=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L_F77=yes
-+      export_dynamic_flag_spec_F77='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_F77=:
-+
-+	hardcode_direct_F77=yes
-+	export_dynamic_flag_spec_F77='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L_F77=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_F77=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-+	  hardcode_direct_F77=no
-+	  hardcode_shlibpath_var_F77=no
-+	  ;;
-+	*)
-+	  hardcode_direct_F77=yes
-+	  export_dynamic_flag_spec_F77='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L_F77=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      link_all_deplibs_F77=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_F77=yes
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct_F77=yes
-+	hardcode_shlibpath_var_F77=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec_F77='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec_F77='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+      allow_undefined_flag_F77=unsupported
-+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag_F77=' -expect_unresolved \*'
-+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag_F77=' -expect_unresolved \*'
-+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator_F77=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag_F77=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs_F77=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_minus_L_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_F77=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-+	  hardcode_direct_F77=no
-+        ;;
-+	motorola)
-+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var_F77=no
-+      export_dynamic_flag_spec_F77='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var_F77=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs_F77=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag_F77='${wl}-z,text'
-+      archive_cmds_need_lc_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag_F77='${wl}-z,text'
-+      allow_undefined_flag_F77='${wl}-z,nodefs'
-+      archive_cmds_need_lc_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator_F77=':'
-+      link_all_deplibs_F77=yes
-+      export_dynamic_flag_spec_F77='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    *)
-+      ld_shlibs_F77=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-+echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-+test "$ld_shlibs_F77" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_F77" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_F77=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_F77 in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_F77
-+	pic_flag=$lt_prog_compiler_pic_F77
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-+        allow_undefined_flag_F77=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_F77=no
-+        else
-+	  archive_cmds_need_lc_F77=yes
-+        fi
-+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_F77=
-+if test -n "$hardcode_libdir_flag_spec_F77" || \
-+   test -n "$runpath_var_F77" || \
-+   test "X$hardcode_automatic_F77" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_F77" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-+     test "$hardcode_minus_L_F77" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_F77=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_F77=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_F77=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-+echo "${ECHO_T}$hardcode_action_F77" >&6; }
-+
-+if test "$hardcode_action_F77" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_F77 \
-+    CC_F77 \
-+    LD_F77 \
-+    lt_prog_compiler_wl_F77 \
-+    lt_prog_compiler_pic_F77 \
-+    lt_prog_compiler_static_F77 \
-+    lt_prog_compiler_no_builtin_flag_F77 \
-+    export_dynamic_flag_spec_F77 \
-+    thread_safe_flag_spec_F77 \
-+    whole_archive_flag_spec_F77 \
-+    enable_shared_with_static_runtimes_F77 \
-+    old_archive_cmds_F77 \
-+    old_archive_from_new_cmds_F77 \
-+    predep_objects_F77 \
-+    postdep_objects_F77 \
-+    predeps_F77 \
-+    postdeps_F77 \
-+    compiler_lib_search_path_F77 \
-+    archive_cmds_F77 \
-+    archive_expsym_cmds_F77 \
-+    postinstall_cmds_F77 \
-+    postuninstall_cmds_F77 \
-+    old_archive_from_expsyms_cmds_F77 \
-+    allow_undefined_flag_F77 \
-+    no_undefined_flag_F77 \
-+    export_symbols_cmds_F77 \
-+    hardcode_libdir_flag_spec_F77 \
-+    hardcode_libdir_flag_spec_ld_F77 \
-+    hardcode_libdir_separator_F77 \
-+    hardcode_automatic_F77 \
-+    module_cmds_F77 \
-+    module_expsym_cmds_F77 \
-+    lt_cv_prog_compiler_c_o_F77 \
-+    fix_srcfile_path_F77 \
-+    exclude_expsyms_F77 \
-+    include_expsyms_F77; do
-+
-+    case $var in
-+    old_archive_cmds_F77 | \
-+    old_archive_from_new_cmds_F77 | \
-+    archive_cmds_F77 | \
-+    archive_expsym_cmds_F77 | \
-+    module_cmds_F77 | \
-+    module_expsym_cmds_F77 | \
-+    old_archive_from_expsyms_cmds_F77 | \
-+    export_symbols_cmds_F77 | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_F77
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_F77
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_F77
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_F77
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_F77
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_F77
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_F77
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_F77
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_F77
-+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_F77
-+module_expsym_cmds=$lt_module_expsym_cmds_F77
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_F77
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_F77
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_F77
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_F77
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_F77
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_F77
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_F77
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_F77
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_F77
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_F77
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_F77
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_F77
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_F77
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      GCJ)
-+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+objext_GCJ=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+compiler_GCJ=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+archive_cmds_need_lc_GCJ=no
-+
-+old_archive_cmds_GCJ=$old_archive_cmds
-+
-+
-+lt_prog_compiler_no_builtin_flag_GCJ=
-+
-+if test "$GCC" = yes; then
-+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_rtti_exceptions=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="-fno-rtti -fno-exceptions"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16189: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:16193: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_rtti_exceptions=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-+else
-+    :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl_GCJ=
-+lt_prog_compiler_pic_GCJ=
-+lt_prog_compiler_static_GCJ=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl_GCJ='-Wl,'
-+    lt_prog_compiler_static_GCJ='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_GCJ='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_GCJ=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_GCJ='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic_GCJ='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      else
-+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic_GCJ='-qnocommon'
-+         lt_prog_compiler_wl_GCJ='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_GCJ='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl_GCJ='-Wl,'
-+	lt_prog_compiler_pic_GCJ='-KPIC'
-+	lt_prog_compiler_static_GCJ='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl_GCJ='-Wl,'
-+	lt_prog_compiler_pic_GCJ='-fpic'
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl_GCJ='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static_GCJ='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic_GCJ='-KPIC'
-+	  lt_prog_compiler_static_GCJ='-Bstatic'
-+	  lt_prog_compiler_wl_GCJ='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic_GCJ='-KPIC'
-+	  lt_prog_compiler_static_GCJ='-Bstatic'
-+	  lt_prog_compiler_wl_GCJ=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl_GCJ='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl_GCJ='-Qoption ld '
-+      lt_prog_compiler_pic_GCJ='-PIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic_GCJ='-pic'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_GCJ"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_GCJ=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16479: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:16483: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_GCJ=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-+    case $lt_prog_compiler_pic_GCJ in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_GCJ=
-+     lt_prog_compiler_can_build_shared_GCJ=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_GCJ=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_GCJ=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_GCJ=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_GCJ=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_GCJ=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_GCJ=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16583: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:16587: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_GCJ=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag_GCJ=
-+  enable_shared_with_static_runtimes_GCJ=no
-+  archive_cmds_GCJ=
-+  archive_expsym_cmds_GCJ=
-+  old_archive_From_new_cmds_GCJ=
-+  old_archive_from_expsyms_cmds_GCJ=
-+  export_dynamic_flag_spec_GCJ=
-+  whole_archive_flag_spec_GCJ=
-+  thread_safe_flag_spec_GCJ=
-+  hardcode_libdir_flag_spec_GCJ=
-+  hardcode_libdir_flag_spec_ld_GCJ=
-+  hardcode_libdir_separator_GCJ=
-+  hardcode_direct_GCJ=no
-+  hardcode_minus_L_GCJ=no
-+  hardcode_shlibpath_var_GCJ=unsupported
-+  link_all_deplibs_GCJ=unknown
-+  hardcode_automatic_GCJ=no
-+  module_cmds_GCJ=
-+  module_expsym_cmds_GCJ=
-+  always_export_symbols_GCJ=no
-+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms_GCJ=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs_GCJ=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec_GCJ=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs_GCJ=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag_GCJ=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      allow_undefined_flag_GCJ=unsupported
-+      always_export_symbols_GCJ=no
-+      enable_shared_with_static_runtimes_GCJ=yes
-+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec_GCJ='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs_GCJ=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs_GCJ=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs_GCJ=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs_GCJ" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec_GCJ=
-+      export_dynamic_flag_spec_GCJ=
-+      whole_archive_flag_spec_GCJ=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag_GCJ=unsupported
-+      always_export_symbols_GCJ=yes
-+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L_GCJ=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct_GCJ=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds_GCJ=''
-+      hardcode_direct_GCJ=yes
-+      hardcode_libdir_separator_GCJ=':'
-+      link_all_deplibs_GCJ=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct_GCJ=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L_GCJ=yes
-+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+  	  hardcode_libdir_separator_GCJ=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols_GCJ=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag_GCJ='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag_GCJ="-z nodefs"
-+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-+	  allow_undefined_flag_GCJ=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec_GCJ='$convenience'
-+	  archive_cmds_need_lc_GCJ=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec_GCJ=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec_GCJ=' '
-+      allow_undefined_flag_GCJ=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds_GCJ='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes_GCJ=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_direct_GCJ=no
-+      hardcode_automatic_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=unsupported
-+      whole_archive_flag_spec_GCJ=''
-+      link_all_deplibs_GCJ=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_GCJ=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_GCJ=yes
-+      hardcode_minus_L_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      hardcode_direct_GCJ=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L_GCJ=yes
-+      export_dynamic_flag_spec_GCJ='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_GCJ=:
-+
-+	hardcode_direct_GCJ=yes
-+	export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L_GCJ=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_GCJ=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-+	  hardcode_direct_GCJ=no
-+	  hardcode_shlibpath_var_GCJ=no
-+	  ;;
-+	*)
-+	  hardcode_direct_GCJ=yes
-+	  export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L_GCJ=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      link_all_deplibs_GCJ=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_GCJ=yes
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct_GCJ=yes
-+	hardcode_shlibpath_var_GCJ=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec_GCJ='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+      allow_undefined_flag_GCJ=unsupported
-+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator_GCJ=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag_GCJ=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs_GCJ=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_minus_L_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_GCJ=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-+	  hardcode_direct_GCJ=no
-+        ;;
-+	motorola)
-+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var_GCJ=no
-+      export_dynamic_flag_spec_GCJ='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var_GCJ=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs_GCJ=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag_GCJ='${wl}-z,text'
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag_GCJ='${wl}-z,text'
-+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator_GCJ=':'
-+      link_all_deplibs_GCJ=yes
-+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    *)
-+      ld_shlibs_GCJ=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-+echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-+test "$ld_shlibs_GCJ" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_GCJ" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_GCJ=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_GCJ in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_GCJ
-+	pic_flag=$lt_prog_compiler_pic_GCJ
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-+        allow_undefined_flag_GCJ=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_GCJ=no
-+        else
-+	  archive_cmds_need_lc_GCJ=yes
-+        fi
-+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_GCJ=
-+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-+   test -n "$runpath_var_GCJ" || \
-+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_GCJ" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-+     test "$hardcode_minus_L_GCJ" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_GCJ=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_GCJ=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_GCJ=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-+echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-+
-+if test "$hardcode_action_GCJ" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_GCJ \
-+    CC_GCJ \
-+    LD_GCJ \
-+    lt_prog_compiler_wl_GCJ \
-+    lt_prog_compiler_pic_GCJ \
-+    lt_prog_compiler_static_GCJ \
-+    lt_prog_compiler_no_builtin_flag_GCJ \
-+    export_dynamic_flag_spec_GCJ \
-+    thread_safe_flag_spec_GCJ \
-+    whole_archive_flag_spec_GCJ \
-+    enable_shared_with_static_runtimes_GCJ \
-+    old_archive_cmds_GCJ \
-+    old_archive_from_new_cmds_GCJ \
-+    predep_objects_GCJ \
-+    postdep_objects_GCJ \
-+    predeps_GCJ \
-+    postdeps_GCJ \
-+    compiler_lib_search_path_GCJ \
-+    archive_cmds_GCJ \
-+    archive_expsym_cmds_GCJ \
-+    postinstall_cmds_GCJ \
-+    postuninstall_cmds_GCJ \
-+    old_archive_from_expsyms_cmds_GCJ \
-+    allow_undefined_flag_GCJ \
-+    no_undefined_flag_GCJ \
-+    export_symbols_cmds_GCJ \
-+    hardcode_libdir_flag_spec_GCJ \
-+    hardcode_libdir_flag_spec_ld_GCJ \
-+    hardcode_libdir_separator_GCJ \
-+    hardcode_automatic_GCJ \
-+    module_cmds_GCJ \
-+    module_expsym_cmds_GCJ \
-+    lt_cv_prog_compiler_c_o_GCJ \
-+    fix_srcfile_path_GCJ \
-+    exclude_expsyms_GCJ \
-+    include_expsyms_GCJ; do
-+
-+    case $var in
-+    old_archive_cmds_GCJ | \
-+    old_archive_from_new_cmds_GCJ | \
-+    archive_cmds_GCJ | \
-+    archive_expsym_cmds_GCJ | \
-+    module_cmds_GCJ | \
-+    module_expsym_cmds_GCJ | \
-+    old_archive_from_expsyms_cmds_GCJ | \
-+    export_symbols_cmds_GCJ | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_GCJ
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_GCJ
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_GCJ
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_GCJ
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_GCJ
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_GCJ
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_GCJ
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_GCJ
-+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_GCJ
-+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_GCJ
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_GCJ
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_GCJ
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_GCJ
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_GCJ
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_GCJ
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_GCJ
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_GCJ
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_GCJ
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_GCJ
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_GCJ
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      RC)
-+
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+objext_RC=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+compiler_RC=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+lt_cv_prog_compiler_c_o_RC=yes
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_RC \
-+    CC_RC \
-+    LD_RC \
-+    lt_prog_compiler_wl_RC \
-+    lt_prog_compiler_pic_RC \
-+    lt_prog_compiler_static_RC \
-+    lt_prog_compiler_no_builtin_flag_RC \
-+    export_dynamic_flag_spec_RC \
-+    thread_safe_flag_spec_RC \
-+    whole_archive_flag_spec_RC \
-+    enable_shared_with_static_runtimes_RC \
-+    old_archive_cmds_RC \
-+    old_archive_from_new_cmds_RC \
-+    predep_objects_RC \
-+    postdep_objects_RC \
-+    predeps_RC \
-+    postdeps_RC \
-+    compiler_lib_search_path_RC \
-+    archive_cmds_RC \
-+    archive_expsym_cmds_RC \
-+    postinstall_cmds_RC \
-+    postuninstall_cmds_RC \
-+    old_archive_from_expsyms_cmds_RC \
-+    allow_undefined_flag_RC \
-+    no_undefined_flag_RC \
-+    export_symbols_cmds_RC \
-+    hardcode_libdir_flag_spec_RC \
-+    hardcode_libdir_flag_spec_ld_RC \
-+    hardcode_libdir_separator_RC \
-+    hardcode_automatic_RC \
-+    module_cmds_RC \
-+    module_expsym_cmds_RC \
-+    lt_cv_prog_compiler_c_o_RC \
-+    fix_srcfile_path_RC \
-+    exclude_expsyms_RC \
-+    include_expsyms_RC; do
-+
-+    case $var in
-+    old_archive_cmds_RC | \
-+    old_archive_from_new_cmds_RC | \
-+    archive_cmds_RC | \
-+    archive_expsym_cmds_RC | \
-+    module_cmds_RC | \
-+    module_expsym_cmds_RC | \
-+    old_archive_from_expsyms_cmds_RC | \
-+    export_symbols_cmds_RC | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_RC
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_RC
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_RC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_RC
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_RC
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_RC
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_RC
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_RC
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_RC
-+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_RC
-+module_expsym_cmds=$lt_module_expsym_cmds_RC
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_RC
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_RC
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_RC
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_RC
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_RC
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_RC
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_RC
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_RC
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_RC
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_RC
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_RC
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_RC
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_RC
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	;;
-+
-+      *)
-+	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-+   { (exit 1); exit 1; }; }
-+	;;
-+      esac
-+
-+      # Append the new tag name to the list of available tags.
-+      if test -n "$tagname" ; then
-+      available_tags="$available_tags $tagname"
-+    fi
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+
-+  # Now substitute the updated list of available tags.
-+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+    mv "${ofile}T" "$ofile"
-+    chmod +x "$ofile"
-+  else
-+    rm -f "${ofile}T"
-+    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-+   { (exit 1); exit 1; }; }
-+  fi
-+fi
-+
-+
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+
-+# Prevent multiple expansion
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+  ac_ct_CC=$CC
-+  # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+else
-+  CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+          if test -n "$ac_tool_prefix"; then
-+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  fi
-+fi
-+if test -z "$CC"; then
-+  # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+       ac_prog_rejected=yes
-+       continue
-+     fi
-+    ac_cv_prog_CC="cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+  # We found a bogon in the path, so make sure we never use it.
-+  set dummy $ac_cv_prog_CC
-+  shift
-+  if test $# != 0; then
-+    # We chose a different compiler from the bogus one.
-+    # However, it has the same basename, so the bogon will be chosen
-+    # first if we set CC to just the basename; use the full file name.
-+    shift
-+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+  fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+  if test -n "$ac_tool_prefix"; then
-+  for ac_prog in cl.exe
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CC" && break
-+  done
-+fi
-+if test -z "$CC"; then
-+  ac_ct_CC=$CC
-+  for ac_prog in cl.exe
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CC" && break
-+done
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_c_werror_flag=$ac_c_werror_flag
-+   ac_c_werror_flag=yes
-+   ac_cv_prog_cc_g=no
-+   CFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_c_werror_flag=$ac_save_c_werror_flag
-+	 CFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+  CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+  if test "$GCC" = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-g"
-+  fi
-+else
-+  if test "$GCC" = yes; then
-+    CFLAGS="-O2"
-+  else
-+    CFLAGS=
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-+   function prototypes and stuff, but not '\xHH' hex character constants.
-+   These don't provoke an error unfortunately, instead are silently treated
-+   as 'x'.  The following induces an error, until -std is added to get
-+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-+   array size at least.  It's necessary to write '\x00'==0 to get something
-+   that's true only with -std.  */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+   inside strings and character constants.  */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_c89=$ac_arg
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+  test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+  x)
-+    { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+  xno)
-+    { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+  *)
-+    CC="$CC $ac_cv_prog_cc_c89"
-+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CC"   am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CC_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CC_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for ${CC-cc} option to accept ANSI C" >&5
-+echo $ECHO_N "checking for ${CC-cc} option to accept ANSI C... $ECHO_C" >&6; }
-+if test "${am_cv_prog_cc_stdc+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  am_cv_prog_cc_stdc=no
-+ac_save_CC="$CC"
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX			-qlanglvl=ansi
-+# Ultrix and OSF/1	-std1
-+# HP-UX 10.20 and later	-Ae
-+# HP-UX older versions	-Aa -D_HPUX_SOURCE
-+# SVR4			-Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+
-+int
-+main ()
-+{
-+
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  am_cv_prog_cc_stdc="$ac_arg"; break
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+CC="$ac_save_CC"
-+
-+fi
-+
-+if test -z "$am_cv_prog_cc_stdc"; then
-+  { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: $am_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$am_cv_prog_cc_stdc" >&6; }
-+fi
-+case "x$am_cv_prog_cc_stdc" in
-+  x|xno) ;;
-+  *) CC="$CC $am_cv_prog_cc_stdc" ;;
-+esac
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for library containing strerror" >&5
-+echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; }
-+if test "${ac_cv_search_strerror+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_func_search_save_LIBS=$LIBS
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char strerror ();
-+int
-+main ()
-+{
-+return strerror ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_lib in '' cposix; do
-+  if test -z "$ac_lib"; then
-+    ac_res="none required"
-+  else
-+    ac_res=-l$ac_lib
-+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-+  fi
-+  rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_search_strerror=$ac_res
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext
-+  if test "${ac_cv_search_strerror+set}" = set; then
-+  break
-+fi
-+done
-+if test "${ac_cv_search_strerror+set}" = set; then
-+  :
-+else
-+  ac_cv_search_strerror=no
-+fi
-+rm conftest.$ac_ext
-+LIBS=$ac_func_search_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
-+echo "${ECHO_T}$ac_cv_search_strerror" >&6; }
-+ac_res=$ac_cv_search_strerror
-+if test "$ac_res" != no; then
-+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-+
-+fi
-+
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+  ./ | .// | /cC/* | \
-+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+  /usr/ucb/* ) ;;
-+  *)
-+    # OSF1 and SCO ODT 3.0 have their own names for install.
-+    # Don't use installbsd from OSF since it installs stuff as root
-+    # by default.
-+    for ac_prog in ginstall scoinst install; do
-+      for ac_exec_ext in '' $ac_executable_extensions; do
-+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+	  if test $ac_prog = install &&
-+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  elif test $ac_prog = install &&
-+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # program-specific install script used by HP pwplus--don't use.
-+	    :
-+	  else
-+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+	    break 3
-+	  fi
-+	fi
-+      done
-+    done
-+    ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL=$ac_cv_path_install
-+  else
-+    # As a last resort, use the slow shell script.  Don't cache a
-+    # value for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the value is a relative name.
-+    INSTALL=$ac_install_sh
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+
-+# Extract the first word of "db2ps", so it can be a program name with args.
-+set dummy db2ps; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_DB2PS+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $DB2PS in
-+  [\\/]* | ?:[\\/]*)
-+  ac_cv_path_DB2PS="$DB2PS" # Let the user override the test with a path.
-+  ;;
-+  *)
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_path_DB2PS="$as_dir/$ac_word$ac_exec_ext"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+  ;;
-+esac
-+fi
-+DB2PS=$ac_cv_path_DB2PS
-+if test -n "$DB2PS"; then
-+  { echo "$as_me:$LINENO: result: $DB2PS" >&5
-+echo "${ECHO_T}$DB2PS" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+if test x${DB2PS} = x ; then
-+  { echo "$as_me:$LINENO: WARNING: PostScript documentation cannot be generated!" >&5
-+echo "$as_me: WARNING: PostScript documentation cannot be generated!" >&2;}
-+fi
-+
-+# Extract the first word of "ps2pdf", so it can be a program name with args.
-+set dummy ps2pdf; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_PS2PDF+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $PS2PDF in
-+  [\\/]* | ?:[\\/]*)
-+  ac_cv_path_PS2PDF="$PS2PDF" # Let the user override the test with a path.
-+  ;;
-+  *)
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_path_PS2PDF="$as_dir/$ac_word$ac_exec_ext"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+  ;;
-+esac
-+fi
-+PS2PDF=$ac_cv_path_PS2PDF
-+if test -n "$PS2PDF"; then
-+  { echo "$as_me:$LINENO: result: $PS2PDF" >&5
-+echo "${ECHO_T}$PS2PDF" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+if test x${PS2PDF} = x ; then
-+  { echo "$as_me:$LINENO: WARNING: PDF documentation cannot be generated!" >&5
-+echo "$as_me: WARNING: PDF documentation cannot be generated!" >&2;}
-+fi
-+
-+
-+
-+
-+case ${host_os} in
-+  cygwin | mingw32 | pw32 | interix3 | interix | uwin) libijs_sysdeps="windows";;
-+  *) libijs_sysdeps="unix";;
-+esac
-+
-+
-+if test x$libijs_sysdeps = xwindows; then
-+  SYSDEPS_WINDOWS_TRUE=
-+  SYSDEPS_WINDOWS_FALSE='#'
-+else
-+  SYSDEPS_WINDOWS_TRUE='#'
-+  SYSDEPS_WINDOWS_FALSE=
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+ijs_libs="${IJS_LIBS} ${IJS_DEPLIBS}"
-+
-+
-+LIBIJS_LIBS="${LIBIJS_LIBS} ${IJS_DEPLIBS}"
-+
-+
-+
-+ac_config_files="$ac_config_files Makefile"
-+
-+ac_config_files="$ac_config_files ijs-config"
-+
-+ac_config_files="$ac_config_files ijs.pc"
-+
-+cat >confcache <<\_ACEOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems.  If it contains results you don't
-+# want to keep, you may remove or edit it.
-+#
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
-+#
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, we kill variables containing newlines.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(
-+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+    eval ac_val=\$$ac_var
-+    case $ac_val in #(
-+    *${as_nl}*)
-+      case $ac_var in #(
-+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+      esac
-+      case $ac_var in #(
-+      _ | IFS | as_nl) ;; #(
-+      *) $as_unset $ac_var ;;
-+      esac ;;
-+    esac
-+  done
-+
-+  (set) 2>&1 |
-+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+    *${as_nl}ac_space=\ *)
-+      # `set' does not quote correctly, so add quotes (double-quote
-+      # substitution turns \\\\ into \\, and sed turns \\ into \).
-+      sed -n \
-+	"s/'/'\\\\''/g;
-+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+      ;; #(
-+    *)
-+      # `set' quotes correctly as required by POSIX, so do not add quotes.
-+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+      ;;
-+    esac |
-+    sort
-+) |
-+  sed '
-+     /^ac_cv_env_/b end
-+     t clear
-+     :clear
-+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+     t end
-+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+     :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+  if test -w "$cache_file"; then
-+    test "x$cache_file" != "x/dev/null" &&
-+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
-+    cat confcache >$cache_file
-+  else
-+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-+  fi
-+fi
-+rm -f confcache
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# Transform confdefs.h into DEFS.
-+# Protect against shell expansion while executing Makefile rules.
-+# Protect against Makefile macro expansion.
-+#
-+# If the first sed substitution is executed (which looks for macros that
-+# take arguments), then branch to the quote section.  Otherwise,
-+# look for a macro that doesn't take arguments.
-+ac_script='
-+t clear
-+:clear
-+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
-+t quote
-+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
-+t quote
-+b any
-+:quote
-+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+	g
-+	s/^\n//
-+	s/\n/ /g
-+	p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-+
-+
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+  # 1. Remove the extension, and $U if already installed.
-+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+  ac_i=`echo "$ac_i" | sed "$ac_script"`
-+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-+  #    will be set to the directory where LIBOBJS objects are built.
-+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-+
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+if test -z "${SYSDEPS_WINDOWS_TRUE}" && test -z "${SYSDEPS_WINDOWS_FALSE}"; then
-+  { { echo "$as_me:$LINENO: error: conditional \"SYSDEPS_WINDOWS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"SYSDEPS_WINDOWS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate the current configuration.
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in config.log if it exists.
-+
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization.  ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+  echo "#! /bin/sh" >conf$$.sh
-+  echo  "exit 0"   >>conf$$.sh
-+  chmod +x conf$$.sh
-+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+    PATH_SEPARATOR=';'
-+  else
-+    PATH_SEPARATOR=:
-+  fi
-+  rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+  as_unset=unset
-+else
-+  as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.  Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" ""	$as_nl"
-+
-+# Find who we are.  Look in the path if we contain no directory separator.
-+case $0 in
-+  *[\\/]* ) as_myself=$0 ;;
-+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+     ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+  as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+  { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+  LC_TELEPHONE LC_TIME
-+do
-+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+    eval $as_var=C; export $as_var
-+  else
-+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+  fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+  as_basename=basename
-+else
-+  as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+    sed '/^.*\/\([^/][^/]*\)\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+  # uniformly replaced by the line number.  The first 'sed' inserts a
-+  # line-number line after each line using $LINENO; the second 'sed'
-+  # does the real work.  The second script uses 'N' to pair each
-+  # line-number line with the line containing $LINENO, and appends
-+  # trailing '-' during substitution so that $LINENO is not a special
-+  # case at line end.
-+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-+  # E. McMahon (1931-1989) for sed's syntax.  :-)
-+  sed -n '
-+    p
-+    /[$]LINENO/=
-+  ' <$as_myself |
-+    sed '
-+      s/[$]LINENO.*/&-/
-+      t lineno
-+      b
-+      :lineno
-+      N
-+      :loop
-+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+      t loop
-+      s/-\n.*//
-+    ' >$as_me.lineno &&
-+  chmod +x "$as_me.lineno" ||
-+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+   { (exit 1); exit 1; }; }
-+
-+  # Don't try to exec as it changes $[0], causing all sort of problems
-+  # (the dirname of $[0] is not the place where we might find the
-+  # original and so on.  Autoconf is especially sensitive to this).
-+  . "./$as_me.lineno"
-+  # Exit status is that of the last command.
-+  exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
-+else
-+  as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+  case `echo 'x\c'` in
-+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-+  *)   ECHO_C='\c';;
-+  esac;;
-+*)
-+  ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+  rm -f conf$$.dir/conf$$.file
-+else
-+  rm -f conf$$.dir
-+  mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s='ln -s'
-+  # ... but there are two gotchas:
-+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+  # In both cases, we have to default to `cp -p'.
-+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+    as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s=ln
-+else
-+  as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+  as_mkdir_p=:
-+else
-+  test -d ./-p && rmdir ./-p
-+  as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+  as_test_x='test -x'
-+else
-+  if ls -dL / >/dev/null 2>&1; then
-+    as_ls_L_option=L
-+  else
-+    as_ls_L_option=
-+  fi
-+  as_test_x='
-+    eval sh -c '\''
-+      if test -d "$1"; then
-+        test -d "$1/.";
-+      else
-+	case $1 in
-+        -*)set "./$1";;
-+	esac;
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	???[sx]*):;;*)false;;esac;fi
-+    '\'' sh
-+  '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+exec 6>&1
-+
-+# Save the log message, to keep $[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling.
-+ac_log="
-+This file was extended by ijs $as_me 0.35, which was
-+generated by GNU Autoconf 2.61.  Invocation command line was
-+
-+  CONFIG_FILES    = $CONFIG_FILES
-+  CONFIG_HEADERS  = $CONFIG_HEADERS
-+  CONFIG_LINKS    = $CONFIG_LINKS
-+  CONFIG_COMMANDS = $CONFIG_COMMANDS
-+  $ $0 $@
-+
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+# Files that config.status was made for.
-+config_files="$ac_config_files"
-+config_commands="$ac_config_commands"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+  -h, --help       print this help, then exit
-+  -V, --version    print version number and configuration settings, then exit
-+  -q, --quiet      do not print progress messages
-+  -d, --debug      don't remove temporary files
-+      --recheck    update $as_me by reconfiguring in the same conditions
-+  --file=FILE[:TEMPLATE]
-+		   instantiate the configuration file FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration commands:
-+$config_commands
-+
-+Report bugs to <bug-autoconf@gnu.org>."
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+ijs config.status 0.35
-+configured by $0, generated by GNU Autoconf 2.61,
-+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright (C) 2006 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
-+INSTALL='$INSTALL'
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value.  By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+  case $1 in
-+  --*=*)
-+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-+    ac_shift=:
-+    ;;
-+  *)
-+    ac_option=$1
-+    ac_optarg=$2
-+    ac_shift=shift
-+    ;;
-+  esac
-+
-+  case $ac_option in
-+  # Handling of the options.
-+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+    ac_cs_recheck=: ;;
-+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+    echo "$ac_cs_version"; exit ;;
-+  --debug | --debu | --deb | --de | --d | -d )
-+    debug=: ;;
-+  --file | --fil | --fi | --f )
-+    $ac_shift
-+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+    ac_need_defaults=false;;
-+  --he | --h |  --help | --hel | -h )
-+    echo "$ac_cs_usage"; exit ;;
-+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+    ac_cs_silent=: ;;
-+
-+  # This is an error.
-+  -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
-+   { (exit 1); exit 1; }; } ;;
-+
-+  *) ac_config_targets="$ac_config_targets $1"
-+     ac_need_defaults=false ;;
-+
-+  esac
-+  shift
-+done
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+  exec 6>/dev/null
-+  ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+  CONFIG_SHELL=$SHELL
-+  export CONFIG_SHELL
-+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+  echo
-+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+  echo "$ac_log"
-+} >&5
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+#
-+# INIT-COMMANDS
-+#
-+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
-+for ac_config_target in $ac_config_targets
-+do
-+  case $ac_config_target in
-+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+    "ijs-config") CONFIG_FILES="$CONFIG_FILES ijs-config" ;;
-+    "ijs.pc") CONFIG_FILES="$CONFIG_FILES ijs.pc" ;;
-+
-+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+   { (exit 1); exit 1; }; };;
-+  esac
-+done
-+
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used.  Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-+fi
-+
-+# Have a temporary directory for convenience.  Make it in the build tree
-+# simply because there is no reason against having it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
-+$debug ||
-+{
-+  tmp=
-+  trap 'exit_status=$?
-+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
-+  trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-+  test -n "$tmp" && test -d "$tmp"
-+}  ||
-+{
-+  tmp=./conf$$-$RANDOM
-+  (umask 077 && mkdir "$tmp")
-+} ||
-+{
-+   echo "$me: cannot create a temporary directory in ." >&2
-+   { (exit 1); exit 1; }
-+}
-+
-+#
-+# Set up the sed scripts for CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+  cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-+INSTALL_DATA!$INSTALL_DATA$ac_delim
-+PACKAGE!$PACKAGE$ac_delim
-+VERSION!$VERSION$ac_delim
-+ACLOCAL!$ACLOCAL$ac_delim
-+AUTOCONF!$AUTOCONF$ac_delim
-+AUTOMAKE!$AUTOMAKE$ac_delim
-+AUTOHEADER!$AUTOHEADER$ac_delim
-+MAKEINFO!$MAKEINFO$ac_delim
-+AMTAR!$AMTAR$ac_delim
-+install_sh!$install_sh$ac_delim
-+STRIP!$STRIP$ac_delim
-+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-+AWK!$AWK$ac_delim
-+SET_MAKE!$SET_MAKE$ac_delim
-+IJS_MAJOR_VERSION!$IJS_MAJOR_VERSION$ac_delim
-+IJS_MINOR_VERSION!$IJS_MINOR_VERSION$ac_delim
-+IJS_CURRENT_INTERFACE!$IJS_CURRENT_INTERFACE$ac_delim
-+IJS_INTERFACE_AGE!$IJS_INTERFACE_AGE$ac_delim
-+IJS_BINARY_AGE!$IJS_BINARY_AGE$ac_delim
-+IJS_VERSION!$IJS_VERSION$ac_delim
-+LT_RELEASE!$LT_RELEASE$ac_delim
-+LT_CURRENT!$LT_CURRENT$ac_delim
-+LT_REVISION!$LT_REVISION$ac_delim
-+LT_AGE!$LT_AGE$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+DEPDIR!$DEPDIR$ac_delim
-+am__include!$am__include$ac_delim
-+am__quote!$am__quote$ac_delim
-+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-+CCDEPMODE!$CCDEPMODE$ac_delim
-+SED!$SED$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LN_S!$LN_S$ac_delim
-+ECHO!$ECHO$ac_delim
-+AR!$AR$ac_delim
-+RANLIB!$RANLIB$ac_delim
-+CPP!$CPP$ac_delim
-+CXX!$CXX$ac_delim
-+CXXFLAGS!$CXXFLAGS$ac_delim
-+ac_ct_CXX!$ac_ct_CXX$ac_delim
-+CXXDEPMODE!$CXXDEPMODE$ac_delim
-+_ACEOF
-+
-+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-+    break
-+  elif $ac_last_try; then
-+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+   { (exit 1); exit 1; }; }
-+  else
-+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+  fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+  ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+  cat >conf$$subs.sed <<_ACEOF
-+CXXCPP!$CXXCPP$ac_delim
-+F77!$F77$ac_delim
-+FFLAGS!$FFLAGS$ac_delim
-+ac_ct_F77!$ac_ct_F77$ac_delim
-+LIBTOOL!$LIBTOOL$ac_delim
-+LIBTOOL_DEPS!$LIBTOOL_DEPS$ac_delim
-+DB2PS!$DB2PS$ac_delim
-+PS2PDF!$PS2PDF$ac_delim
-+SYSDEPS_WINDOWS_TRUE!$SYSDEPS_WINDOWS_TRUE$ac_delim
-+SYSDEPS_WINDOWS_FALSE!$SYSDEPS_WINDOWS_FALSE$ac_delim
-+IJS_CFLAGS!$IJS_CFLAGS$ac_delim
-+IJS_LIBS!$IJS_LIBS$ac_delim
-+IJS_DEPLIBS!$IJS_DEPLIBS$ac_delim
-+ijs_cflags!$ijs_cflags$ac_delim
-+ijs_libs!$ijs_libs$ac_delim
-+INCLUDES!$INCLUDES$ac_delim
-+LIBIJS_LIBS!$LIBIJS_LIBS$ac_delim
-+LIBOBJS!$LIBOBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 19; then
-+    break
-+  elif $ac_last_try; then
-+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+   { (exit 1); exit 1; }; }
-+  else
-+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+  fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+  ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[	 ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[	 ]*$//
-+}'
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in  :F $CONFIG_FILES      :C $CONFIG_COMMANDS
-+do
-+  case $ac_tag in
-+  :[FHLC]) ac_mode=$ac_tag; continue;;
-+  esac
-+  case $ac_mode$ac_tag in
-+  :[FHL]*:*);;
-+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+   { (exit 1); exit 1; }; };;
-+  :[FH]-) ac_tag=-:-;;
-+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+  esac
-+  ac_save_IFS=$IFS
-+  IFS=:
-+  set x $ac_tag
-+  IFS=$ac_save_IFS
-+  shift
-+  ac_file=$1
-+  shift
-+
-+  case $ac_mode in
-+  :L) ac_source=$1;;
-+  :[FH])
-+    ac_file_inputs=
-+    for ac_f
-+    do
-+      case $ac_f in
-+      -) ac_f="$tmp/stdin";;
-+      *) # Look for the file first in the build tree, then in the source tree
-+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-+	 # because $ac_f cannot contain `:'.
-+	 test -f "$ac_f" ||
-+	   case $ac_f in
-+	   [\\/$]*) false;;
-+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+	   esac ||
-+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+   { (exit 1); exit 1; }; };;
-+      esac
-+      ac_file_inputs="$ac_file_inputs $ac_f"
-+    done
-+
-+    # Let's still pretend it is `configure' which instantiates (i.e., don't
-+    # use $as_me), people would be surprised to read:
-+    #    /* config.h.  Generated by config.status.  */
-+    configure_input="Generated from "`IFS=:
-+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+    if test x"$ac_file" != x-; then
-+      configure_input="$ac_file.  $configure_input"
-+      { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+    fi
-+
-+    case $ac_tag in
-+    *:-:* | *:-) cat >"$tmp/stdin";;
-+    esac
-+    ;;
-+  esac
-+
-+  ac_dir=`$as_dirname -- "$ac_file" ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$ac_file" : 'X\(//\)[^/]' \| \
-+	 X"$ac_file" : 'X\(//\)$' \| \
-+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$ac_file" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  { as_dir="$ac_dir"
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+   { (exit 1); exit 1; }; }; }
-+  ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+  # A ".." for each directory in $ac_dir_suffix.
-+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+  case $ac_top_builddir_sub in
-+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+  esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+  .)  # We are building in place.
-+    ac_srcdir=.
-+    ac_top_srcdir=$ac_top_builddir_sub
-+    ac_abs_top_srcdir=$ac_pwd ;;
-+  [\\/]* | ?:[\\/]* )  # Absolute name.
-+    ac_srcdir=$srcdir$ac_dir_suffix;
-+    ac_top_srcdir=$srcdir
-+    ac_abs_top_srcdir=$srcdir ;;
-+  *) # Relative name.
-+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+    ac_top_srcdir=$ac_top_build_prefix$srcdir
-+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+
-+  case $ac_mode in
-+  :F)
-+  #
-+  # CONFIG_FILE
-+  #
-+
-+  case $INSTALL in
-+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-+  esac
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+  p
-+  q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+  ac_datarootdir_hack='
-+  s&@datadir@&$datadir&g
-+  s&@docdir@&$docdir&g
-+  s&@infodir@&$infodir&g
-+  s&@localedir@&$localedir&g
-+  s&@mandir@&$mandir&g
-+    s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
-+  sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined.  Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined.  Please make sure it is defined." >&2;}
-+
-+  rm -f "$tmp/stdin"
-+  case $ac_file in
-+  -) cat "$tmp/out"; rm -f "$tmp/out";;
-+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+  esac
-+ ;;
-+
-+
-+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+echo "$as_me: executing $ac_file commands" >&6;}
-+ ;;
-+  esac
-+
-+
-+  case $ac_file$ac_mode in
-+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-+  # Strip MF so we end up with the name of the file.
-+  mf=`echo "$mf" | sed -e 's/:.*$//'`
-+  # Check whether this is an Automake generated Makefile or not.
-+  # We used to match only the files named `Makefile.in', but
-+  # some people rename them; so instead we look at the file content.
-+  # Grep'ing the first line is not enough: some people post-process
-+  # each Makefile.in and add a new line on top of each file to say so.
-+  # So let's grep whole file.
-+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-+    dirpart=`$as_dirname -- "$mf" ||
-+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$mf" : 'X\(//\)[^/]' \| \
-+	 X"$mf" : 'X\(//\)$' \| \
-+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$mf" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  else
-+    continue
-+  fi
-+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
-+  # Extract the definition of DEP_FILES from the Makefile without
-+  # running `make'.
-+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-+  test -z "$DEPDIR" && continue
-+  # When using ansi2knr, U may be empty or an underscore; expand it
-+  U=`sed -n -e '/^U = / s///p' < "$mf"`
-+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-+  # We invoke sed twice because it is the simplest approach to
-+  # changing $(DEPDIR) to its actual value in the expansion.
-+  for file in `sed -n -e '
-+    /^DEP_FILES = .*\\\\$/ {
-+      s/^DEP_FILES = //
-+      :loop
-+	s/\\\\$//
-+	p
-+	n
-+	/\\\\$/ b loop
-+      p
-+    }
-+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-+    # Make sure the directory exists.
-+    test -f "$dirpart/$file" && continue
-+    fdir=`$as_dirname -- "$file" ||
-+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$file" : 'X\(//\)[^/]' \| \
-+	 X"$file" : 'X\(//\)$' \| \
-+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$file" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+    { as_dir=$dirpart/$fdir
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+   { (exit 1); exit 1; }; }; }
-+    # echo "creating $dirpart/$file"
-+    echo '# dummy' > "$dirpart/$file"
-+  done
-+done
-+ ;;
-+    "ijs-config":F) chmod +x ijs-config ;;
-+
-+  esac
-+done # for ac_tag
-+
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
-+chmod +x $CONFIG_STATUS
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded.  So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status.  When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+  ac_cs_success=:
-+  ac_config_status_args=
-+  test "$silent" = yes &&
-+    ac_config_status_args="$ac_config_status_args --quiet"
-+  exec 5>/dev/null
-+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+  exec 5>>config.log
-+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+  # would make configure fail if this is the last instruction.
-+  $ac_cs_success || { (exit 1); exit 1; }
-+fi
-+
diff --git a/print/ghostscript8/Makefile b/print/ghostscript8/Makefile
index f8ba951bbf2a..a77c83e0a339 100644
--- a/print/ghostscript8/Makefile
+++ b/print/ghostscript8/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	ghostscript
 PORTVERSION=	8.62
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${PORTVERSION:S/.//}/:gs_srcs \
@@ -41,7 +41,10 @@ CONFIGURE_ENV=	${MAKE_ENV} \
 		CPPFLAGS="-DUPD_SIGNAL=0 -I. -I${WRKSRC}/jasper/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include" \
 		LDFLAGS="-L${LOCALBASE}/lib"
 CONFIGURE_ARGS=	--disable-compile-inits \
-		--enable-contrib
+		--enable-contrib \
+		--enable-dynamic \
+		--with-ijs \
+		--with-jasper
 XCFLAGS=	${PTHREAD_CFLAGS}
 XLDFLAGS=	${PTHREAD_LIBS}
 
@@ -211,18 +214,6 @@ post-patch:
 		 s|%%GS_VERSION%%|${PORTVERSION}|g' \
 			${WRKSRC}/contrib/japanese/dmp_site.ps
 
-pre-configure:
-	${TOUCH} ${WRKSRC}/ijs/config.guess
-	cd ${WRKSRC}/expat/conftools && ${INSTALL_SCRIPT} \
-		ltmain.sh mkinstalldirs install-sh config.sub \
-		${WRKSRC}/ijs
-
-post-configure:
-	cd ${WRKSRC}/jasper && \
-		${SETENV} ${CONFIGURE_ENV} ${SH} ./configure --prefix=${PREFIX}
-	cd ${WRKSRC}/ijs && \
-		${SETENV} ${CONFIGURE_ENV} ${SH} ./configure --prefix=${PREFIX}
-
 pre-build-drivers.mak:
 	@${ECHO_CMD} 'DEVICE_DEVS= \' > ${WRKSRC}/src/drivers.mak
 .for D in ${OPTIONS:MGS_*:S/^GS_//}
diff --git a/print/ghostscript8/Makefile.drivers b/print/ghostscript8/Makefile.drivers
index 8f7e364cb94a..6e82ae0d7c7a 100644
--- a/print/ghostscript8/Makefile.drivers
+++ b/print/ghostscript8/Makefile.drivers
@@ -19,9 +19,9 @@ OPTIONS_ICONV_DEFAULT=	off
 .endif
 
 OPTIONS_X11= \
-GS_x11	"D: X Window System version 11, release >=4"	${OPTIONS_X11_DEFAULT} \
+GS_x11		"D: X Window System version 11, release >=4"	${OPTIONS_X11_DEFAULT} \
 GS_x11alpha	"D: X Window System masquer. alpha capability"	${OPTIONS_X11_DEFAULT} \
-GS_x11cmyk	"D: X Window System masquer. 1-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
+GS_x11cmyk	"D: X Window System masquer. 1bit/plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk2	"D: X Window System 2-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk4	"D: X Window System 4-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
 GS_x11cmyk8	"D: X Window System 8-bit-per-plane CMYK"	${OPTIONS_X11_DEFAULT} \
@@ -36,199 +36,200 @@ GS_lvga256	"D: SVGAlib, 256-color VGA modes"	${OPTIONS_SVGALIB_DEFAULT} \
 GS_vgalib	"D: SVGAlib, 16-color VGA modes"	${OPTIONS_SVGALIB_DEFAULT}
 
 OPTIONS_ICONV= \
-GS_oprp	"D: OpenPrinting Raster printer driver interface [contr]"	${OPTIONS_ICONV_DEFAULT} \
-GS_opvp	"D: OpenPrinting Vecter printer driver interface [contr]"	${OPTIONS_ICONV_DEFAULT}
+GS_oprp		"D: OpenPrinting Raster driver interface"	${OPTIONS_ICONV_DEFAULT} \
+GS_opvp		"D: OpenPrinting Vecter driver interface"	${OPTIONS_ICONV_DEFAULT}
 
 OPTIONS+=	${OPTIONS_X11}
 OPTIONS+=	${OPTIONS_SVGALIB}
 OPTIONS+=	${OPTIONS_ICONV}
 
 OPTIONS+=	\
-GS_md2k	"D: ALPS MD-2000/2010/4000/1300/1500/5000 [contr]"	on \
-GS_md5k	"D: ALPS MD-5000 Eco Mode [contr]"	on \
-GS_md50Mono	"D: ALPS MD-5000 Monochrome [contr]"	on \
-GS_md50Eco	"D: ALPS MD-5000 Eco Mode [contr]"	on \
-GS_md1xMono	"D: ALPS MD-1x00 Monochrome [contr]"	on \
-GS_appledmp	"D: Apple Dot Matrix Printer / Imagewriter"	on \
-GS_iwhi	"D: Apple Imagewriter, high-resolution mode"	on \
-GS_iwlo	"D: Apple Imagewriter, low-resolution mode"	on \
-GS_iwlq	"D: Apple Imagewriter LQ in 320 x 216 dpi mode"	on \
+GS_display	"D: display device for GS shared library"	on \
+GS_md2k		"D: ALPS MD-2000/2010/4000/1300/1500/5000"	on \
+GS_md5k		"D: ALPS MD-5000 Eco Mode"	on \
+GS_md50Mono	"D: ALPS MD-5000 Monochrome"	on \
+GS_md50Eco	"D: ALPS MD-5000 Eco Mode"	on \
+GS_md1xMono	"D: ALPS MD-1x00 Monochrome"	on \
+GS_appledmp	"D: Apple Dot Matrix Printer/Imagewriter"	on \
+GS_iwhi		"D: Apple Imagewriter, high-resolution mode"	on \
+GS_iwlo		"D: Apple Imagewriter, low-resolution mode"	on \
+GS_iwlq		"D: Apple Imagewriter LQ in 320x216dpi mode"	on \
 GS_hl7x0	"D: Brother HL-720/730/760(=PCL), MFC6550MC"	on \
-GS_hl1240	"D: Brother HL-1030/240 (600x600 dpi) [contr]"	on \
-GS_hl1250	"D: Brother HL-1050/1070/1250/1270N (1200x600 dpi) [contr]"	on \
+GS_hl1240	"D: Brother HL-1030/240 (600x600dpi)"	on \
+GS_hl1250	"D: Brother HL-1050/1070/1250/1270N (1200x600)"	on \
 GS_bj10e	"D: Canon BJ-10e"	on \
-GS_bj10v	"D: Canon BJ-10v [contr]"	on \
-GS_bj10vh	"D: Canon BJ-10v, high-mergin [contr]"	on \
-GS_bj200	"D: Canon BJ-200 and BJC-240(b&w)"	on \
-GS_bjc600	"D: Canon BJC-600/4xxx/70 + Apple StyleWriter 2x00"	on \
+GS_bj10v	"D: Canon BJ-10v"	on \
+GS_bj10vh	"D: Canon BJ-10v, high-mergin"	on \
+GS_bj200	"D: Canon BJ-200/BJC-240(mono)"	on \
+GS_bjc600	"D: Canon BJC-600/4xxx/70, StyleWriter 2x00"	on \
 GS_bjc800	"D: Canon BJC-240/800"	on \
-GS_bjccmyk	"D: Canon BJC-210/240/250/265/1000 [contr]"	on \
-GS_bjccolor	"D: Canon BJC-210/240/250/265/1000 truecolor [contr]"	on \
-GS_bjcgray	"D: Canon BJC-210/240/250/265/1000 grayscale [contr]"	on \
-GS_bjcmono	"D: Canon BJC-210/240/250/265/1000 monochrome [contr]"	on \
-GS_lbp8	"D: Canon LBP-8II laser printer"	on \
-GS_lbp310	"D: Canon LBP-310 [contr]"	on \
-GS_lbp320	"D: Canon LBP-320 Pro/LBP-350 [contr]"	on \
-GS_lips2p	"D: Canon LIPS II+ [contr]"	on \
-GS_lips3	"D: Canon LIPS III [contr]"	on \
-GS_lips4	"D: Canon LIPS IV [contr]"	on \
-GS_bjc880j	"D: Canon LIPS IVc (BJC-680J/880J) [contr]"	on \
-GS_lips4v	"D: Canon LIPS IV, vector output mode [contr]"	on \
+GS_bjccmyk	"D: Canon BJC-210/240/250/265/1000"	on \
+GS_bjccolor	"D: Canon BJC-210/240/250/265/1000 truecolor"	on \
+GS_bjcgray	"D: Canon BJC-210/240/250/265/1000 grayscale"	on \
+GS_bjcmono	"D: Canon BJC-210/240/250/265/1000 monochrome"	on \
+GS_lbp8		"D: Canon LBP-8II laser printer"	on \
+GS_lbp310	"D: Canon LBP-310"	on \
+GS_lbp320	"D: Canon LBP-320 Pro/LBP-350"	on \
+GS_lips2p	"D: Canon LIPS II+"	on \
+GS_lips3	"D: Canon LIPS III"	on \
+GS_lips4	"D: Canon LIPS IV"	on \
+GS_bjc880j	"D: Canon LIPS IVc, BJC-680J/880J"	on \
+GS_lips4v	"D: Canon LIPS IV, vector output mode"	on \
 GS_m8510	"D: C.Itoh M8510 printer"	on \
 GS_coslw2p	"D: CoStar LabelWriter II II/Plus"	on \
 GS_coslwxl	"D: CoStar LabelWriter XL"	on \
 GS_uniprint	"D: Configurable ESC/P,ESC/P2,HP-RTL/PCL,P2X"	on \
-GS_dmprt	"D: Configurable dot matrix printer driver [contr]"	on \
-GS_dl2100	"D: DEC DL2100 [contr]"	on \
-GS_la50	"D: DEC LA50 [contr]"	on \
-GS_la70	"D: DEC LA70 [contr]"	on \
-GS_la75	"D: DEC LA75 [contr]"	on \
-GS_la75plus	"D: DEC LA75+ [contr]"	on \
-GS_ln03	"D: DEC LN03 [contr]"	on \
+GS_dmprt	"D: Configurable dot matrix printer driver"	on \
+GS_dl2100	"D: DEC DL2100"	on \
+GS_la50		"D: DEC LA50"	on \
+GS_la70		"D: DEC LA70"	on \
+GS_la75		"D: DEC LA75"	on \
+GS_la75plus	"D: DEC LA75+"	on \
+GS_ln03		"D: DEC LN03"	on \
 GS_lj250	"D: DEC LJ250 Companion color printer"	on \
 GS_declj250	"D: DEC LJ250 driver (alternate)"	on \
 GS_ap3250	"D: Epson ActionPrinter 3250"	on \
 GS_epson	"D: Epson dot matrix, 9/24-pin"	on \
-GS_eps9mid	"D: Epson 9-pin, interleaved lines, medium resol"	on \
-GS_eps9high	"D: Epson 9-pin, interleaved lines, triple resol"	on \
+GS_eps9mid	"D: Epson 9-pin, interleaved lines, medium res"	on \
+GS_eps9high	"D: Epson 9-pin, interleaved lines, triple res"	on \
 GS_lp8000	"D: Epson LP-8000 line printer"	on \
-GS_epag	"D: Epson ESC/Page laser printer (generic)"	on \
-GS_escpage	"D: Epson ESC/Page laser printer (generic) [contr]"	on \
-GS_lp2000	"D: Epson LP-2000/3000/7000/7000G laser printer [contr]"	on \
-GS_alc8600	"D: Epson AL-C8600 color laser printer [contr]"	on \
-GS_alc8500	"D: Epson AL-C8500 color laser printer [contr]"	on \
-GS_alc2000	"D: Epson AL-C2000 color laser printer [contr]"	on \
-GS_alc4000	"D: Epson AL-C4000 color laser printer [contr]"	on \
-GS_alc1900	"D: Epson AL-C1900 color laser printer [contr]"	on \
-GS_alc4100	"D: Epson AL-C4100 color laser printer [contr]"	on \
-GS_lp9800c	"D: Epson LP-9800C color laser printer [contr]"	on \
-GS_lp9000c	"D: Epson LP-9000C color laser printer [contr]"	on \
-GS_lp9500c	"D: Epson LP-9500C color laser printer [contr]"	on \
-GS_lp8800c	"D: Epson LP-8800C color laser printer [contr]"	on \
-GS_lp8300c	"D: Epson LP-8300C color laser printer [contr]"	on \
-GS_lp8500c	"D: Epson LP-8500C color laser printer [contr]"	on \
-GS_lp3000c	"D: Epson LP-3000C color laser printer [contr]"	on \
-GS_lp8200c	"D: Epson LP-8200C color laser printer [contr]"	on \
-GS_lp8000c	"D: Epson LP-8000C color laser printer [contr]"	on \
-GS_epl6100	"D: Epson EPL-6100 laser printer [contr]"	on \
-GS_epl5900	"D: Epson EPL-5900 laser printer [contr]"	on \
-GS_epl5800	"D: Epson EPL-5800 laser printer [contr]"	on \
-GS_epl2050	"D: Epson EPL-N2050 laser printer [contr]"	on \
-GS_epl2050p	"D: Epson EPL-N2050+ laser printer [contr]"	on \
-GS_epl2120	"D: Epson EPL-N2120 laser printer [contr]"	on \
-GS_epl2500	"D: Epson EPL-N2500 laser printer [contr]"	on \
-GS_epl2750	"D: Epson EPL-N2750 laser printer [contr]"	on \
-GS_lp9000b	"D: Epson LP-9000B laser printer [contr]"	on \
-GS_lp2500	"D: Epson LP-2500 laser printer [contr]"	on \
-GS_lp9100	"D: Epson LP-9100(R) laser printer [contr]"	on \
-GS_lp7900	"D: Epson LP-7900(R) laser printer [contr]"	on \
-GS_lp7500	"D: Epson LP-7500(R) laser printer [contr]"	on \
-GS_lp2400	"D: Epson LP-2400 laser printer [contr]"	on \
-GS_lp2200	"D: Epson LP-2200 laser printer [contr]"	on \
-GS_lp9400	"D: Epson LP-9400(R) laser printer [contr]"	on \
-GS_lp8900	"D: Epson LP-8900(R) laser printer [contr]"	on \
-GS_lp8700	"D: Epson LP-8700(R) laser printer [contr]"	on \
-GS_lp8100	"D: Epson LP-8100(R) laser printer [contr]"	on \
-GS_lp7700	"D: Epson LP-7700(R) laser printer [contr]"	on \
-GS_lp8600f	"D: Epson LP-8600FX(N) laser printer [contr]"	on \
-GS_lp8400f	"D: Epson LP-8400FX(N) laser printer [contr]"	on \
-GS_lp8300f	"D: Epson LP-8300F laser printer [contr]"	on \
-GS_lp1900	"D: Epson LP-1900(N) laser printer [contr]"	on \
-GS_lp9600s	"D: Epson LP-9600S laser printer [contr]"	on \
-GS_lp9300	"D: Epson LP-9300 laser printer [contr]"	on \
-GS_lp9600	"D: Epson LP-9600 laser printer [contr]"	on \
-GS_lp8600	"D: Epson LP-8600FX(N) laser printer [contr]"	on \
-GS_lp1800	"D: Epson LP-1800 laser printer [contr]"	on \
-GS_lq850	"D: Epson LQ-850 (360x360) (emul on Canon BJ300)"	on \
+GS_epag		"D: Epson ESC/Page laser printer (generic)"	on \
+GS_escpage	"D: Epson ESC/Page laser printer (generic)"	on \
+GS_lp2000	"D: Epson LP-2000/3000/7000/7000G laser printer"	on \
+GS_alc8600	"D: Epson AL-C8600 color laser printer"	on \
+GS_alc8500	"D: Epson AL-C8500 color laser printer"	on \
+GS_alc2000	"D: Epson AL-C2000 color laser printer"	on \
+GS_alc4000	"D: Epson AL-C4000 color laser printer"	on \
+GS_alc1900	"D: Epson AL-C1900 color laser printer"	on \
+GS_alc4100	"D: Epson AL-C4100 color laser printer"	on \
+GS_lp9800c	"D: Epson LP-9800C color laser printer"	on \
+GS_lp9000c	"D: Epson LP-9000C color laser printer"	on \
+GS_lp9500c	"D: Epson LP-9500C color laser printer"	on \
+GS_lp8800c	"D: Epson LP-8800C color laser printer"	on \
+GS_lp8300c	"D: Epson LP-8300C color laser printer"	on \
+GS_lp8500c	"D: Epson LP-8500C color laser printer"	on \
+GS_lp3000c	"D: Epson LP-3000C color laser printer"	on \
+GS_lp8200c	"D: Epson LP-8200C color laser printer"	on \
+GS_lp8000c	"D: Epson LP-8000C color laser printer"	on \
+GS_epl6100	"D: Epson EPL-6100 laser printer"	on \
+GS_epl5900	"D: Epson EPL-5900 laser printer"	on \
+GS_epl5800	"D: Epson EPL-5800 laser printer"	on \
+GS_epl2050	"D: Epson EPL-N2050 laser printer"	on \
+GS_epl2050p	"D: Epson EPL-N2050+ laser printer"	on \
+GS_epl2120	"D: Epson EPL-N2120 laser printer"	on \
+GS_epl2500	"D: Epson EPL-N2500 laser printer"	on \
+GS_epl2750	"D: Epson EPL-N2750 laser printer"	on \
+GS_lp9000b	"D: Epson LP-9000B laser printer"	on \
+GS_lp2500	"D: Epson LP-2500 laser printer"	on \
+GS_lp9100	"D: Epson LP-9100(R) laser printer"	on \
+GS_lp7900	"D: Epson LP-7900(R) laser printer"	on \
+GS_lp7500	"D: Epson LP-7500(R) laser printer"	on \
+GS_lp2400	"D: Epson LP-2400 laser printer"	on \
+GS_lp2200	"D: Epson LP-2200 laser printer"	on \
+GS_lp9400	"D: Epson LP-9400(R) laser printer"	on \
+GS_lp8900	"D: Epson LP-8900(R) laser printer"	on \
+GS_lp8700	"D: Epson LP-8700(R) laser printer"	on \
+GS_lp8100	"D: Epson LP-8100(R) laser printer"	on \
+GS_lp7700	"D: Epson LP-7700(R) laser printer"	on \
+GS_lp8600f	"D: Epson LP-8600FX(N) laser printer"	on \
+GS_lp8400f	"D: Epson LP-8400FX(N) laser printer"	on \
+GS_lp8300f	"D: Epson LP-8300F laser printer"	on \
+GS_lp1900	"D: Epson LP-1900(N) laser printer"	on \
+GS_lp9600s	"D: Epson LP-9600S laser printer"	on \
+GS_lp9300	"D: Epson LP-9300 laser printer"	on \
+GS_lp9600	"D: Epson LP-9600 laser printer"	on \
+GS_lp8600	"D: Epson LP-8600FX(N) laser printer"	on \
+GS_lp1800	"D: Epson LP-1800 laser printer"	on \
+GS_lq850	"D: Epson LQ-850 (360x360, emul on Canon BJ300)"	on \
 GS_epsonc	"D: Epson LQ-2550, Fujitsu 3400/2400/1200 color"	on \
-GS_mj700v2c	"D: Epson MachJet series, CMYK [contr]"	on \
-GS_mj500c	"D: Epson MachJet MJ-500C 360dpi, CMY/mono [contr]"	on \
-GS_mj6000c	"D: Epson MachJet MJ-830C/930C/6000C [contr]"	on \
-GS_mj8000c	"D: Epson MachJet MJ-8000C [contr]"	on \
+GS_mj700v2c	"D: Epson MachJet series, CMYK"	on \
+GS_mj500c	"D: Epson MachJet MJ-500C 360dpi, CMY/mono"	on \
+GS_mj6000c	"D: Epson MachJet MJ-830C/930C/6000C"	on \
+GS_mj8000c	"D: Epson MachJet MJ-8000C"	on \
 GS_st800	"D: Epson Stylus 800 printer"	on \
-GS_stcolor	"D: Epson Stylus Color and II/IIs/1500 (see driver docu)"	on \
-GS_photoex	"D: Epson Stylus Color Photo, Photo EX, Photo 700"	on \
-GS_fmlbp	"D: Fujitsu contrib2xx Page Printer [contr]"	on \
-GS_fmpr	"D: Fujitsu contrib [contr]"	on \
+GS_stcolor	"D: Epson Stylus Color and II/IIs/1500"	on \
+GS_photoex	"D: Epson Stylus Color Photo/Photo EX/Photo 700"	on \
+GS_fmlbp	"D: Fujitsu contrib2xx Page Printer"	on \
+GS_fmpr		"D: Fujitsu contrib"	on \
 GS_lp2563	"D: HP 2563B line printer"	on \
 GS_dnj650c	"D: HP DesignJet 650C"	on \
 GS_deskjet	"D: HP DeskJet and DeskJet Plus"	on \
 GS_djet500	"D: HP DeskJet 500 (for DeskJet 600 use -r600)"	on \
-GS_cdeskjet	"D: HP DeskJet 500C, 1 bit/pixel color"	on \
-GS_djet500c	"D: HP DeskJet 500C alternate driver, not for 550/560C"	on \
-GS_cdjcolor	"D: HP DeskJet 500C/540C (24b/px), Citizen Projet IIc"	on \
-GS_cdjmono	"D: HP DeskJet 500/510/520/540C b/w printing"	on \
+GS_cdeskjet	"D: HP DeskJet 500C (1b/px)"	on \
+GS_djet500c	"D: HP DeskJet 500C (alternative)"	on \
+GS_cdjcolor	"D: HP DeskJet 500C/540C (24b/px)"	on \
+GS_cdjmono	"D: HP DeskJet 500/510/520/540C (mono)"	on \
 GS_cdj500	"D: HP DeskJet 500/540C (same as cdjcolor)"	on \
 GS_cdj550	"D: HP DeskJet 550C/560C/660C/660Cse"	on \
 GS_dj505j	"D: HP DeskJet 505J"	on \
-GS_cdj670	"D: HP DeskJet 670/690 [contr]"	on \
-GS_cdj850	"D: HP DeskJet 850/855/870/1100 [contr]"	on \
-GS_cdj880	"D: HP DeskJet 880 [contr]"	on \
-GS_cdj890	"D: HP DeskJet 890 [contr]"	on \
-GS_cdj1600	"D: HP DeskJet 1600 [contr]"	on \
-GS_chp2200	"D: HP Business Inkjet 2200 [contr]"	on \
-GS_cdj970	"D: HP DeskJet 970CXi [contr]"	on \
+GS_cdj670	"D: HP DeskJet 670/690"	on \
+GS_cdj850	"D: HP DeskJet 850/855/870/1100"	on \
+GS_cdj880	"D: HP DeskJet 880"	on \
+GS_cdj890	"D: HP DeskJet 890"	on \
+GS_cdj1600	"D: HP DeskJet 1600"	on \
+GS_chp2200	"D: HP Business Inkjet 2200"	on \
+GS_cdj970	"D: HP DeskJet 970CXi"	on \
 GS_laserjet	"D: HP LaserJet"	on \
 GS_ljetplus	"D: HP LaserJet Plus"	on \
-GS_ljet2p	"D: HP LaserJet IId/IIp/III* with TIFF compression"	on \
-GS_ljet3	"D: HP LaserJet III* with Delta Row compression"	on \
-GS_ljet3d	"D: HP LaserJet IIID with duplex capability"	on \
+GS_ljet2p	"D: HP LaserJet IId/IIp/III* (TIFF compression)"	on \
+GS_ljet3	"D: HP LaserJet III* (Delta Row compression)"	on \
+GS_ljet3d	"D: HP LaserJet IIID (duplex capability)"	on \
 GS_ljet4	"D: HP LaserJet 4/5L/5P (not real LJ5), 600dpi"	on \
-GS_ljet4d	"D: HP LaserJet 4 with duplex, 600dpi"	on \
-GS_lj4dith	"D: HP LaserJet 4 with Floyd-Steinberg dithering"	on \
+GS_ljet4d	"D: HP LaserJet 4 (duplex + 600dpi)"	on \
+GS_lj4dith	"D: HP LaserJet 4 (Floyd-Steinberg dithering)"	on \
 GS_ljet4pjl	"D: HP LaserJet 4V/4LJ Pro"	on \
-GS_lj4dithp	"D: HP LaserJet 4V/4LJ Pro with dithering"	on \
-GS_cljet5	"D: HP LaserJet 5/5M Color (new driver, old=cljet5pr)"	on \
+GS_lj4dithp	"D: HP LaserJet 4V/4LJ Pro (dithering)"	on \
+GS_cljet5	"D: HP LaserJet 5/5M Color (new)"	on \
 GS_cljet5c	"D: HP LaserJet 5/5M Color Simple"	on \
-GS_cljet5pr	"D: HP LaserJet 5/5M Color (old, rotation hacks/flaws)"	on \
-GS_lj5mono	"D: HP LaserJet 5 and 6 family (PCL5 / PCL XL), bitmap"	on \
-GS_lj5gray	"D: HP LaserJet 5 and 6 family, gray-scale bitmap"	on \
-GS_pj	"D: HP PaintJet XL driver"	on \
+GS_cljet5pr	"D: HP LaserJet 5/5M Color (old)"	on \
+GS_lj5mono	"D: HP LaserJet 5/6 (PCL5/PCL XL), bitmap"	on \
+GS_lj5gray	"D: HP LaserJet 5/6 gray-scale bitmap"	on \
+GS_pj		"D: HP PaintJet XL driver"	on \
 GS_pjetxl	"D: HP PaintJet XL driver (alternate)"	on \
-GS_pjxl	"D: HP PaintJet XL color printer"	on \
+GS_pjxl		"D: HP PaintJet XL color printer"	on \
 GS_paintjet	"D: HP PaintJet color printer (alternate)"	on \
-GS_pjxl300	"D: HP PaintJet XL300, DeskJet 1200C, HP CopyJet"	on \
-GS_pxlmono	"D: HP PCL XL mono printers (LaserJet 5/6 family)"	on \
-GS_pxlcolor	"D: HP PCL XL color printers (Color LaserJet 4500/5000)"	on \
-GS_pcl3	"D: HP PCL 3+ (generic) [contr]"	on \
-GS_ijs	"D: HP Inkjet and other raster devices"	on \
+GS_pjxl300	"D: HP PaintJet XL300, DeskJet 1200C, CopyJet"	on \
+GS_pxlmono	"D: HP PCL XL mono (LaserJet 5/6 family)"	on \
+GS_pxlcolor	"D: HP PCL XL color (Color LaserJet 4500/5000)"	on \
+GS_pcl3		"D: HP PCL 3+ (generic)"	on \
+GS_ijs		"D: HP Inkjet and other raster devices"	on \
 GS_ibmpro	"D: IBM 9-pin Proprinter"	on \
 GS_jetp3852	"D: IBM Jetprinter ink-jet color (Model \#3852)"	on \
 GS_imagen	"D: Imagen ImPress printers"	on \
 GS_fs600	"D: Kyocera FS-600 (600 dpi)"	on \
 GS_lxm5700m	"D: Lexmark 5700 monotone"	on \
-GS_lxm3200	"D: Lexmark 3200/Z12/Z22/Z31/Z32 [contr]"	on \
-GS_lx5000	"D: Lexmark 5000/Z51/Z82 [contr]"	on \
-GS_lex2050	"D: Lexmark 2050 [contr]"	on \
-GS_lex3200	"D: Lexmark 3200 [contr]"	on \
-GS_lex5700	"D: Lexmark 5700 [contr]"	on \
-GS_lex7000	"D: Lexmark 7000 [contr]"	on \
-GS_cp50	"D: Mitsubishi CP50 color"	on \
-GS_pr1000	"D: NEC PC-PR 1000 [contr]"	on \
-GS_pr1000_4	"D: NEC PC-PR 1000/4 [contr]"	on \
-GS_pr150	"D: NEC PC-PR 150 [contr]"	on \
-GS_pr201	"D: NEC PC-PR 201 [contr]"	on \
+GS_lxm3200	"D: Lexmark 3200/Z12/Z22/Z31/Z32"	on \
+GS_lx5000	"D: Lexmark 5000/Z51/Z82"	on \
+GS_lex2050	"D: Lexmark 2050"	on \
+GS_lex3200	"D: Lexmark 3200"	on \
+GS_lex5700	"D: Lexmark 5700"	on \
+GS_lex7000	"D: Lexmark 7000"	on \
+GS_cp50		"D: Mitsubishi CP50 color"	on \
+GS_pr1000	"D: NEC PC-PR 1000"	on \
+GS_pr1000_4	"D: NEC PC-PR 1000/4"	on \
+GS_pr150	"D: NEC PC-PR 150"	on \
+GS_pr201	"D: NEC PC-PR 201"	on \
 GS_picty180	"D: NEC PICTY 180 (PC-PR101J/180)"	on \
-GS_necp6	"D: NEC PinWriter P6/P6+/P60, 360x360 DPI resol"	on \
-GS_npdl	"D: NEC Printer Description Language [contr]"	on \
+GS_necp6	"D: NEC PinWriter P6/P6+/P60 (360x360)"	on \
+GS_npdl		"D: NEC Printer Description Language"	on \
 GS_oce9050	"D: OCE 9050 printer"	on \
 GS_oki182	"D: Okidata MicroLine 182"	on \
 GS_okiibm	"D: Okidata MicroLine IBM-compatible printers"	on \
-GS_ml600	"D: Okidata Microline 600CL/620CL [contr]"	on \
-GS_oki4w	"D: Okidata OkiPage 4w+ [contr]"	on \
-GS_atx23	"D: Practical Automation ATX-23 label printer"	on \
-GS_atx24	"D: Practical Automation ATX-24 label printer"	on \
-GS_atx38	"D: Practical Automation ATX-38 label printer"	on \
+GS_ml600	"D: Okidata Microline 600CL/620CL"	on \
+GS_oki4w	"D: Okidata OkiPage 4w+"	on \
+GS_atx23	"D: Practical Automation ATX-23"	on \
+GS_atx24	"D: Practical Automation ATX-24"	on \
+GS_atx38	"D: Practical Automation ATX-38"	on \
 GS_r4081	"D: Ricoh 4081 laser printer"	on \
-GS_rpdl	"D: Ricoh Printer Description Language [contr]"	on \
-GS_gdi	"D: Samsung SmartGDI laser printer [contr]"	on \
-GS_jj100	"D: Star JJ-100 [contr]"	on \
-GS_sj48	"D: StarJet 48 inkjet printer"	on \
-GS_t4693d2	"D: Tektronix 4693d color, 2 bits per R/G/B component"	on \
-GS_t4693d4	"D: Tektronix 4693d color, 4 bits per R/G/B component"	on \
-GS_t4693d8	"D: Tektronix 4693d color, 8 bits per R/G/B component"	on \
+GS_rpdl		"D: Ricoh Printer Description Language"	on \
+GS_gdi		"D: Samsung SmartGDI laser printer"	on \
+GS_jj100	"D: Star JJ-100"	on \
+GS_sj48		"D: StarJet 48 inkjet printer"	on \
+GS_t4693d2	"D: Tektronix 4693d color, 2b/RGB"	on \
+GS_t4693d4	"D: Tektronix 4693d color, 4b/RGB"	on \
+GS_t4693d8	"D: Tektronix 4693d color, 8b/RGB"	on \
 GS_tek4696	"D: Tektronix 4695/4696 inkjet plotter"	on \
-GS_xes	"D: Xerox XES (2700, 3700, 4045, etc.) [contr]"	on \
+GS_xes		"D: Xerox XES (2700, 3700, 4045, etc.)"	on \
 GS_bmpmono	"D: BMP Monochrome"	on \
 GS_bmpgray	"D: BMP 8-bit gray"	on \
 GS_bmp16	"D: BMP 4-bit EGA/VGA"	on \
@@ -237,88 +238,88 @@ GS_bmp16m	"D: BMP 24-bit"	on \
 GS_bmp32b	"D: BMP 32-bit pseudo-.BMP"	on \
 GS_bmpsep1	"D: BMP Separated 1-bit CMYK"	on \
 GS_bmpsep8	"D: BMP Separated 8-bit CMYK"	on \
-GS_ccr	"D: CalComp Raster format"	on \
+GS_ccr		"D: CalComp Raster format"	on \
 GS_cgmmono	"D: CGM Monochrome -- LOW LEVEL OUTPUT ONLY"	on \
-GS_cgm8	"D: CGM 8-bit 256-color -- DITTO"	on \
+GS_cgm8		"D: CGM 8-bit 256-color -- DITTO"	on \
 GS_cgm24	"D: CGM 24-bit color -- DITTO"	on \
-GS_cif	"D: CIF file format for VLSI"	on \
-GS_dfaxhigh	"D: DigiBoard, DigiFAX software format (high resol)"	on \
-GS_dfaxlow	"D: DigiFAX low (normal) resol"	on \
-GS_xcf	"D: Gimp XCF, RGB"	on \
+GS_cif		"D: CIF file format for VLSI"	on \
+GS_dfaxhigh	"D: DigiBoard, DigiFAX (high res)"	on \
+GS_dfaxlow	"D: DigiFAX (normal res)"	on \
+GS_xcf		"D: Gimp XCF, RGB"	on \
 GS_xcfcmyk	"D: Gimp XCF, CMYK"	on \
-GS_faxg3	"D: Group 3 fax, with EOLs but no header or EOD"	on \
-GS_faxg32d	"D: Group 3 2-D fax, with EOLs but no header or EOD"	on \
-GS_faxg4	"D: Group 4 fax, with EOLs but no header or EOD"	on \
-GS_miff24	"D: ImageMagick MIFF, 24-bit direct color, RLE compressed"	on \
+GS_faxg3	"D: Group 3 FAX (EOL + no header/EOD)"	on \
+GS_faxg32d	"D: Group 3 2-D FAX (EOL + no header/EOD)"	on \
+GS_faxg4	"D: Group 4 FAX, with EOLs but no header or EOD"	on \
+GS_miff24	"D: ImageMagick MIFF, 24-bit direct color, RLE"	on \
 GS_inferno	"D: Inferno bitmaps"	on \
-GS_jpeg	"D: JPEG format, RGB output"	on \
+GS_jpeg		"D: JPEG format, RGB output"	on \
 GS_jpeggray	"D: JPEG format, gray output"	on \
-GS_mag16	"D: MAG format, 16-color [contr]"	on \
-GS_mag256	"D: MAG format, 256-color [contr]"	on \
+GS_mag16	"D: MAG format, 16-color"xs	on \
+GS_mag256	"D: MAG format, 256-color"	on \
 GS_mgrmono	"D: MGR devices 1-bit monochrome"	on \
 GS_mgrgray2	"D: MGR devices 2-bit gray scale"	on \
 GS_mgrgray4	"D: MGR devices 4-bit gray scale"	on \
 GS_mgrgray8	"D: MGR devices 8-bit gray scale"	on \
-GS_mgr4	"D: MGR devices 4-bit (VGA) color"	on \
-GS_mgr8	"D: MGR devices 8-bit color"	on \
-GS_pcxmono	"D: PCX file format, monochrome 1-bit b/w"	on \
-GS_pcxgray	"D: PCX file format, 8-bit gray scale"	on \
-GS_pcx16	"D: PCX file format, 4-bit planar EGA/VGA color"	on \
-GS_pcx256	"D: PCX file format, 8-bit chunky color"	on \
-GS_pcx24b	"D: PCX file format, 24-bit color 3x8-bit planes"	on \
-GS_pcxcmyk	"D: PCX file format, 4-bit chunky CMYK color"	on \
-GS_pdfwrite	"D: PDF output (like Adobe Acrobat Distiller)"	on \
+GS_mgr4		"D: MGR devices 4-bit (VGA) color"	on \
+GS_mgr8		"D: MGR devices 8-bit color"	on \
+GS_pcxmono	"D: PCX, 1-bit monochrome"	on \
+GS_pcxgray	"D: PCX, 8-bit gray scale"	on \
+GS_pcx16	"D: PCX, 4-bit planar EGA/VGA color"	on \
+GS_pcx256	"D: PCX, 8-bit chunky color"	on \
+GS_pcx24b	"D: PCX, 24-bit color 3x8-bit planes"	on \
+GS_pcxcmyk	"D: PCX, 4-bit chunky CMYK color"	on \
+GS_pdfwrite	"D: Portable Document Format"	on \
 GS_psdrgb	"D: PhotoShop PSD, RGB"	on \
 GS_psdcmyk	"D: PhotoShop PSD, CMYK"	on \
-GS_bit	"D: Plain bits, monochrome"	on \
+GS_bit		"D: Plain bits, monochrome"	on \
 GS_bitrgb	"D: Plain bits, RGB"	on \
 GS_bitcmyk	"D: Plain bits, CMYK"	on \
 GS_plan9bm	"D: Plan 9 bitmap format"	on \
-GS_pam	"D: Portable Arbitrary Map file format"	on \
-GS_pbm	"D: Portable Bitmap,  plain format"	on \
-GS_pbmraw	"D: Portable Bitmap,  raw format"	on \
-GS_pgm	"D: Portable Graymap, plain format"	on \
-GS_pgmraw	"D: Portable Graymap, raw format"	on \
-GS_pgnm	"D: Portable Graymap, plain format, optim. to PBM"	on \
-GS_pgnmraw	"D: Portable Graymap, raw format, optim. to PBM"	on \
-GS_pnm	"D: Portable Pixmap,  plain format RGB, optim. to PGM/PBM"	on \
-GS_pnmraw	"D: Portable Pixmap,  raw format RGB, optim. to PGM/PBM"	on \
-GS_ppm	"D: Portable Pixmap,  plain format RGB"	on \
+GS_pam		"D: Portable Arbitrary Map file"	on \
+GS_pbm		"D: Portable Bitmap, plain"	on \
+GS_pbmraw	"D: Portable Bitmap, raw"	on \
+GS_pgm		"D: Portable Graymap, plain"	on \
+GS_pgmraw	"D: Portable Graymap, raw"	on \
+GS_pgnm		"D: Portable Graymap, plain (PBM opt)"	on \
+GS_pgnmraw	"D: Portable Graymap, raw (PBM opt)"	on \
+GS_pnm		"D: Portable Pixmap, plain RGB (PGM/PBM opt)"	on \
+GS_pnmraw	"D: Portable Pixmap, raw RGB, (PGM/PBM opt)"	on \
+GS_ppm		"D: Portable Pixmap, plain RGB"	on \
 GS_ppmraw	"D: Portable Pixmap,  raw format RGB"	on \
-GS_pkm	"D: Portable inKmap (plain format) (4-bit CMYK => RGB)"	on \
-GS_pkmraw	"D: Portable inKmap (raw format) (4-bit CMYK => RGB)"	on \
-GS_pksm	"D: Portable Separated map (plain) (4-bit CMYK => 4 pages)"	on \
-GS_pksmraw	"D: Portable Separated map (raw) (4-bit CMYK => 4 pages)"	on \
-GS_pngmono	"D: PNG Monochrome Portable Network Graphics"	on \
-GS_pnggray	"D: PNG 8-bit gray Portable Network Graphics"	on \
-GS_png16	"D: PNG 4-bit color Portable Network Graphics"	on \
-GS_png256	"D: PNG 8-bit color Portable Network Graphics"	on \
-GS_png16m	"D: PNG 24-bit color Portable Network Graphics"	on \
-GS_pngalpha	"D: PNG 32-bit RGBA color Portable Network Graphics"	on \
+GS_pkm		"D: Portable inKmap, plain (4b CMYK=>RGB)"	on \
+GS_pkmraw	"D: Portable inKmap, raw (4b CMYK=>RGB)"	on \
+GS_pksm		"D: Portable Separated map, plain (4b CMYK=>4p)"	on \
+GS_pksmraw	"D: Portable Separated map, raw (4b CMYK=>4p)"	on \
+GS_pngmono	"D: PNG (Portable Network Graphics) Mono"	on \
+GS_pnggray	"D: PNG 8-bit Gray"	on \
+GS_png16	"D: PNG 4-bit Color"	on \
+GS_png256	"D: PNG 8-bit Color"	on \
+GS_png16m	"D: PNG 24-bit Color"	on \
+GS_pngalpha	"D: PNG 32-bit RGBA Color"	on \
 GS_psmono	"D: PostScript (Level 1) monochrome image"	on \
 GS_psgray	"D: PostScript (Level 1) 8-bit gray image"	on \
 GS_psrgb	"D: PostScript (Level 2) 24-bit color image"	on \
-GS_pswrite	"D: PostScript output (like PostScript Distillery)"	on \
+GS_pswrite	"D: PostScript (like PostScript Distiller)"	on \
 GS_ps2write	"D: PostScript (Level 2) output"	on \
-GS_epswrite	"D: EPS output (like PostScript Distillery)"	on \
-GS_cfax	"D: SFF format for CAPI fax interface"	on \
+GS_epswrite	"D: Encapsulated PostScript"	on \
+GS_cfax		"D: SFF format for CAPI FAX interface"	on \
 GS_sgirgb	"D: SGI RGB pixmap format"	on \
 GS_sunhmono	"D: Harlequin variant of 1-bit Sun raster file"	on \
-GS_tiffcrle	"D: TIFF CCITT RLE 1 dim = Group 3 fax with no EOLs"	on \
-GS_tiffg3	"D: TIFF Group 3 fax with EOLs"	on \
-GS_tiffg32d	"D: TIFF Group 3 2-D fax"	on \
-GS_tiffg4	"D: TIFF Group 4 fax"	on \
-GS_tiffgray	"D: TIFF 8-bit gray, no compression"	on \
-GS_tiff12nc	"D: TIFF 12-bit RGB, no compression"	on \
-GS_tiff24nc	"D: TIFF 24-bit RGB, no compression, NeXT std. format"	on \
+GS_tiffcrle	"D: TIFF CCITT RLE 1 dim (G3 FAX with no EOL)"	on \
+GS_tiffg3	"D: TIFF Group 3 FAX (with EOL)"	on \
+GS_tiffg32d	"D: TIFF Group 3 2-D FAX"	on \
+GS_tiffg4	"D: TIFF Group 4 FAX"	on \
+GS_tiffgray	"D: TIFF 8-bit gray, no compress"	on \
+GS_tiff12nc	"D: TIFF 12-bit RGB, no compress"	on \
+GS_tiff24nc	"D: TIFF 24-bit RGB, no compress, NeXT format"	on \
 GS_tiff32nc	"D: TIFF 32-bit CMYK"	on \
-GS_tiffsep	"D: TIFF gray for each colorant plus a CMYK composite"	on \
+GS_tiffsep	"D: TIFF gray + CMYK composite"	on \
 GS_tifflzw	"D: TIFF LZW,      tag = 5,     mono"	on \
 GS_tiffpack	"D: TIFF PackBits, tag = 32773, mono"	on \
-GS_bbox	"D: Bounding box output"	on \
+GS_bbox		"D: Bounding box output"	on \
 GS_devicen	"D: DeviceN process color model device"	on \
-GS_perm	"D: DeviceN which permutes color components"	on \
+GS_perm		"D: DeviceN which permutes color components"	on \
 GS_spotcmyk	"D: DeviceN with CMYK and spot color support"	on \
-GS_imdi	"D: IMDI color converting device"	on \
+GS_imdi		"D: IMDI color converting device"	on \
 GS_wtsimdi	"D: WTS halftoning device"	on \
 GS_wtscmyk	"D: WTS halftoning CMYK device"	on
diff --git a/print/ghostscript8/files/patch-ijs-Makefile.in b/print/ghostscript8/files/patch-ijs-Makefile.in
deleted file mode 100644
index 149eefd72084..000000000000
--- a/print/ghostscript8/files/patch-ijs-Makefile.in
+++ /dev/null
@@ -1,705 +0,0 @@
---- /dev/null	2008-05-04 15:23:37.000000000 +0900
-+++ ijs/Makefile.in	2008-05-04 15:23:14.000000000 +0900
-@@ -0,0 +1,702 @@
-+# Makefile.in generated by automake 1.6.3 from Makefile.am.
-+# @configure_input@
-+
-+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-+# Free Software Foundation, Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+@SET_MAKE@
-+SHELL = @SHELL@
-+
-+srcdir = @srcdir@
-+top_srcdir = @top_srcdir@
-+VPATH = @srcdir@
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+bindir = @bindir@
-+sbindir = @sbindir@
-+libexecdir = @libexecdir@
-+datadir = @datadir@
-+sysconfdir = @sysconfdir@
-+sharedstatedir = @sharedstatedir@
-+localstatedir = @localstatedir@
-+libdir = @libdir@
-+infodir = @infodir@
-+mandir = @mandir@
-+includedir = @includedir@
-+oldincludedir = /usr/include
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+top_builddir = .
-+
-+ACLOCAL = @ACLOCAL@
-+AUTOCONF = @AUTOCONF@
-+AUTOMAKE = @AUTOMAKE@
-+AUTOHEADER = @AUTOHEADER@
-+
-+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+install_sh_DATA = $(install_sh) -c -m 644
-+install_sh_PROGRAM = $(install_sh) -c
-+install_sh_SCRIPT = $(install_sh) -c
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+INSTALL_HEADER = $(INSTALL_DATA)
-+transform = @program_transform_name@
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+host_alias = @host_alias@
-+host_triplet = @host@
-+
-+EXEEXT = @EXEEXT@
-+OBJEXT = @OBJEXT@
-+PATH_SEPARATOR = @PATH_SEPARATOR@
-+
-+pkgincludedir = $(includedir)/ijs
-+AMTAR = @AMTAR@
-+AR = @AR@
-+AS = @AS@
-+AWK = @AWK@
-+CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
-+DB2PS = @DB2PS@
-+DEPDIR = @DEPDIR@
-+DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
-+IJS_BINARY_AGE = @IJS_BINARY_AGE@
-+IJS_CFLAGS = @IJS_CFLAGS@
-+IJS_CURRENT_INTERFACE = @IJS_CURRENT_INTERFACE@
-+IJS_DEPLIBS = @IJS_DEPLIBS@
-+IJS_INTERFACE_AGE = @IJS_INTERFACE_AGE@
-+IJS_LIBS = @IJS_LIBS@
-+IJS_MAJOR_VERSION = @IJS_MAJOR_VERSION@
-+IJS_MINOR_VERSION = @IJS_MINOR_VERSION@
-+IJS_VERSION = @IJS_VERSION@
-+INCLUDES = @INCLUDES@
-+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-+LIBIJS_LIBS = @LIBIJS_LIBS@
-+LIBTOOL = @LIBTOOL@
-+LIBTOOL_DEPS = @LIBTOOL_DEPS@
-+LN_S = @LN_S@
-+LT_AGE = @LT_AGE@
-+LT_CURRENT = @LT_CURRENT@
-+LT_RELEASE = @LT_RELEASE@
-+LT_REVISION = @LT_REVISION@
-+OBJDUMP = @OBJDUMP@
-+PACKAGE = @PACKAGE@
-+PS2PDF = @PS2PDF@
-+RANLIB = @RANLIB@
-+RC = @RC@
-+SED = @SED@
-+STRIP = @STRIP@
-+VERSION = @VERSION@
-+am__include = @am__include@
-+am__quote = @am__quote@
-+ijs_cflags = @ijs_cflags@
-+ijs_libs = @ijs_libs@
-+install_sh = @install_sh@
-+
-+AUTOMAKE_OPTIONS = 1.6 foreign dist-bzip2 no-dependencies 
-+
-+MAINT_CHARSET = latin1
-+m4datadir = $(datadir)/aclocal
-+pkgconfigdir = $(libdir)/pkgconfig
-+
-+lib_LTLIBRARIES = libijs.la
-+
-+pkginclude_HEADERS = \
-+	ijs_client.h \
-+	ijs.h \
-+	ijs_server.h
-+
-+
-+noinst_HEADERS = unistd_.h
-+
-+bin_PROGRAMS = ijs_client_example ijs_server_example
-+
-+bin_SCRIPTS = ijs-config
-+
-+libijs_la_SOURCES = \
-+	ijs.c \
-+	ijs_client.c \
-+	ijs_server.c
-+
-+#ijs_version.c
-+EXTRA_libijs_la_SOURCES = ijs_exec_unix.c ijs_exec_win.c
-+@SYSDEPS_WINDOWS_TRUE@libijs_la_LIBADD = ijs_exec_win.lo $(IJS_DEPLIBS)
-+@SYSDEPS_WINDOWS_FALSE@libijs_la_LIBADD = ijs_exec_unix.lo $(IJS_DEPLIBS)
-+# Uncommment to build an unversioned library (version in soname)
-+libijs_la_LDFLAGS = -release $(IJS_VERSION) -rpath $(libdir)
-+
-+# Uncomment to build a versioned library
-+#libijs_la_LDFLAGS = \
-+# -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) \
-+# -rpath $(libdir)
-+ijs_client_example_SOURCES = ijs_client_example.c
-+ijs_client_example_LDADD = libijs.la
-+
-+ijs_server_example_SOURCES = ijs_server_example.c
-+ijs_server_example_LDADD = libijs.la
-+
-+pkgconfig_DATA = ijs.pc
-+
-+man_MANS = ijs-config.1
-+
-+EXTRA_DIST = \
-+	common.mak unix.mak windows.mak \
-+	ijs_spec.sgml state.eps state.fig ijs_spec.pdf \
-+	$(man_MANS)
-+
-+
-+
-+# Note that ijs_spec.pdf is included in the dist list above,
-+# so the 'doc' target needs to be build for 'make dist' to work.
-+CLEANSCRIPTS = \
-+	depcomp \
-+	install-sh \
-+	ltconfig \
-+	mdate-sh \
-+	missing \
-+	mkinstalldirs \
-+	config.guess \
-+	config.sub \
-+	ltmain.sh
-+
-+
-+CLEANFILES = gmon.out core ijs_spec.log ijs_spec.tex ijs_spec.aux ijs_spec.ps ijs_spec.pdf
-+DISTCLEANFILES = ijs-config config.cache config.log config.status
-+# ijs-config.in ijs.pc ijs.pc.in ijs.m4 ijs.h
-+MAINTAINERCLEANFILES = INSTALL aclocal.m4 config.h.in configure Makefile.in stamp-h.in $(CLEANSCRIPTS)
-+subdir = .
-+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-+CONFIG_CLEAN_FILES = ijs-config ijs.pc
-+LTLIBRARIES = $(lib_LTLIBRARIES)
-+
-+@SYSDEPS_WINDOWS_TRUE@libijs_la_DEPENDENCIES = ijs_exec_win.lo
-+@SYSDEPS_WINDOWS_FALSE@libijs_la_DEPENDENCIES = ijs_exec_unix.lo
-+am_libijs_la_OBJECTS = ijs.lo ijs_client.lo ijs_server.lo
-+libijs_la_OBJECTS = $(am_libijs_la_OBJECTS)
-+bin_PROGRAMS = ijs_client_example$(EXEEXT) ijs_server_example$(EXEEXT)
-+PROGRAMS = $(bin_PROGRAMS)
-+
-+am_ijs_client_example_OBJECTS = ijs_client_example.$(OBJEXT)
-+ijs_client_example_OBJECTS = $(am_ijs_client_example_OBJECTS)
-+ijs_client_example_DEPENDENCIES = libijs.la
-+ijs_client_example_LDFLAGS =
-+am_ijs_server_example_OBJECTS = ijs_server_example.$(OBJEXT)
-+ijs_server_example_OBJECTS = $(am_ijs_server_example_OBJECTS)
-+ijs_server_example_DEPENDENCIES = libijs.la
-+ijs_server_example_LDFLAGS =
-+SCRIPTS = $(bin_SCRIPTS)
-+
-+
-+DEFS = @DEFS@
-+DEFAULT_INCLUDES =  -I. -I$(srcdir)
-+CPPFLAGS = @CPPFLAGS@
-+LDFLAGS = @LDFLAGS@
-+LIBS = @LIBS@
-+depcomp =
-+am__depfiles_maybe =
-+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
-+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(CC)
-+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-+CFLAGS = @CFLAGS@
-+DIST_SOURCES = $(libijs_la_SOURCES) $(EXTRA_libijs_la_SOURCES) \
-+	$(ijs_client_example_SOURCES) $(ijs_server_example_SOURCES)
-+
-+NROFF = nroff
-+MANS = $(man_MANS)
-+DATA = $(pkgconfig_DATA)
-+
-+HEADERS = $(noinst_HEADERS) $(pkginclude_HEADERS)
-+
-+DIST_COMMON = README $(noinst_HEADERS) $(pkginclude_HEADERS) \
-+	Makefile.am Makefile.in aclocal.m4 config.guess config.sub \
-+	configure configure.ac ijs-config.in ijs.pc.in install-sh \
-+	ltmain.sh missing mkinstalldirs
-+SOURCES = $(libijs_la_SOURCES) $(EXTRA_libijs_la_SOURCES) $(ijs_client_example_SOURCES) $(ijs_server_example_SOURCES)
-+
-+all: all-am
-+
-+.SUFFIXES:
-+.SUFFIXES: .c .lo .o .obj
-+
-+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
-+ configure.lineno
-+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
-+	cd $(top_srcdir) && \
-+	  $(AUTOMAKE) --foreign  Makefile
-+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-+
-+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-+	$(SHELL) ./config.status --recheck
-+$(srcdir)/configure:  $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-+	cd $(srcdir) && $(AUTOCONF)
-+
-+$(ACLOCAL_M4):  configure.ac 
-+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+ijs-config: $(top_builddir)/config.status ijs-config.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
-+ijs.pc: $(top_builddir)/config.status ijs.pc.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
-+libLTLIBRARIES_INSTALL = $(INSTALL)
-+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(libdir)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	  if test -f $$p; then \
-+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
-+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-libLTLIBRARIES:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
-+	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
-+	done
-+
-+clean-libLTLIBRARIES:
-+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-+	  test -z "$dir" && dir=.; \
-+	  echo "rm -f \"$${dir}/so_locations\""; \
-+	  rm -f "$${dir}/so_locations"; \
-+	done
-+libijs.la: $(libijs_la_OBJECTS) $(libijs_la_DEPENDENCIES) 
-+	$(LINK) -rpath $(libdir) $(libijs_la_LDFLAGS) $(libijs_la_OBJECTS) $(libijs_la_LIBADD) $(LIBS)
-+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-+install-binPROGRAMS: $(bin_PROGRAMS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(bindir)
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-+	  if test -f $$p \
-+	     || test -f $$p1 \
-+	  ; then \
-+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
-+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-binPROGRAMS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-+	  rm -f $(DESTDIR)$(bindir)/$$f; \
-+	done
-+
-+clean-binPROGRAMS:
-+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-+	  echo " rm -f $$p $$f"; \
-+	  rm -f $$p $$f ; \
-+	done
-+ijs_client_example$(EXEEXT): $(ijs_client_example_OBJECTS) $(ijs_client_example_DEPENDENCIES) 
-+	@rm -f ijs_client_example$(EXEEXT)
-+	$(LINK) $(ijs_client_example_LDFLAGS) $(ijs_client_example_OBJECTS) $(ijs_client_example_LDADD) $(LIBS)
-+ijs_server_example$(EXEEXT): $(ijs_server_example_OBJECTS) $(ijs_server_example_DEPENDENCIES) 
-+	@rm -f ijs_server_example$(EXEEXT)
-+	$(LINK) $(ijs_server_example_LDFLAGS) $(ijs_server_example_OBJECTS) $(ijs_server_example_LDADD) $(LIBS)
-+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-+install-binSCRIPTS: $(bin_SCRIPTS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(bindir)
-+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  if test -f $$d$$p; then \
-+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-+	    echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
-+	    $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
-+	  else :; fi; \
-+	done
-+
-+uninstall-binSCRIPTS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-+	  rm -f $(DESTDIR)$(bindir)/$$f; \
-+	done
-+
-+mostlyclean-compile:
-+	-rm -f *.$(OBJEXT) core *.core
-+
-+distclean-compile:
-+	-rm -f *.tab.c
-+
-+.c.o:
-+	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-+
-+.c.obj:
-+	$(COMPILE) -c `cygpath -w $<`
-+
-+.c.lo:
-+	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-+
-+mostlyclean-libtool:
-+	-rm -f *.lo
-+
-+clean-libtool:
-+	-rm -rf .libs _libs
-+
-+distclean-libtool:
-+	-rm -f libtool
-+uninstall-info-am:
-+
-+man1dir = $(mandir)/man1
-+install-man1: $(man1_MANS) $(man_MANS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-+	for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.1*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-+	  else file=$$i; fi; \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  case "$$ext" in \
-+	    1*) ;; \
-+	    *) ext='1' ;; \
-+	  esac; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-+	done
-+uninstall-man1:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-+	for i in $$l2; do \
-+	  case "$$i" in \
-+	    *.1*) list="$$list $$i" ;; \
-+	  esac; \
-+	done; \
-+	for i in $$list; do \
-+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-+	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-+	done
-+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-+install-pkgconfigDATA: $(pkgconfig_DATA)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
-+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \
-+	  $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \
-+	done
-+
-+uninstall-pkgconfigDATA:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \
-+	  rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \
-+	done
-+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
-+	@$(NORMAL_INSTALL)
-+	$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
-+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f"; \
-+	  $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f; \
-+	done
-+
-+uninstall-pkgincludeHEADERS:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
-+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-+	  echo " rm -f $(DESTDIR)$(pkgincludedir)/$$f"; \
-+	  rm -f $(DESTDIR)$(pkgincludedir)/$$f; \
-+	done
-+
-+ETAGS = etags
-+ETAGSFLAGS =
-+
-+tags: TAGS
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	mkid -fID $$unique
-+
-+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-+		$(TAGS_FILES) $(LISP)
-+	tags=; \
-+	here=`pwd`; \
-+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	     $$tags $$unique
-+
-+GTAGS:
-+	here=`$(am__cd) $(top_builddir) && pwd` \
-+	  && cd $(top_srcdir) \
-+	  && gtags -i $(GTAGS_ARGS) $$here
-+
-+distclean-tags:
-+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-+
-+top_distdir = .
-+distdir = $(PACKAGE)-$(VERSION)
-+
-+am__remove_distdir = \
-+  { test ! -d $(distdir) \
-+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-+         && rm -fr $(distdir); }; }
-+
-+GZIP_ENV = --best
-+distcleancheck_listfiles = find . -type f -print
-+
-+distdir: $(DISTFILES)
-+	$(am__remove_distdir)
-+	mkdir $(distdir)
-+	$(mkinstalldirs) $(distdir)/.
-+	@list='$(DISTFILES)'; for file in $$list; do \
-+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-+	    dir="/$$dir"; \
-+	    $(mkinstalldirs) "$(distdir)$$dir"; \
-+	  else \
-+	    dir=''; \
-+	  fi; \
-+	  if test -d $$d/$$file; then \
-+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-+	    fi; \
-+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-+	  else \
-+	    test -f $(distdir)/$$file \
-+	    || cp -p $$d/$$file $(distdir)/$$file \
-+	    || exit 1; \
-+	  fi; \
-+	done
-+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-+	|| chmod -R a+r $(distdir)
-+dist-gzip: distdir
-+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	$(am__remove_distdir)
-+
-+dist-bzip2: distdir
-+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+dist dist-all: distdir
-+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+# This target untars the dist file and tries a VPATH configuration.  Then
-+# it guarantees that the distribution is self-contained by making another
-+# tarfile.
-+distcheck: dist
-+	$(am__remove_distdir)
-+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-+	chmod -R a-w $(distdir); chmod a+w $(distdir)
-+	mkdir $(distdir)/=build
-+	mkdir $(distdir)/=inst
-+	chmod a-w $(distdir)
-+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-+	  && cd $(distdir)/=build \
-+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-+	    $(DISTCHECK_CONFIGURE_FLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-+	  && $(MAKE) $(AM_MAKEFLAGS) check \
-+	  && $(MAKE) $(AM_MAKEFLAGS) install \
-+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-+	      || { echo "ERROR: files left after uninstall:" ; \
-+	           find $$dc_install_base -type f -print ; \
-+	           exit 1; } >&2 ) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-+	  && rm -f $(distdir).tar.gz \
-+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-+	$(am__remove_distdir)
-+	@echo "$(distdir).tar.gz is ready for distribution" | \
-+	  sed 'h;s/./=/g;p;x;p;x'
-+distcleancheck: distclean
-+	if test '$(srcdir)' = . ; then \
-+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-+	  exit 1 ; \
-+	fi
-+	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-+	  || { echo "ERROR: files left after distclean:" ; \
-+	       $(distcleancheck_listfiles) ; \
-+	       exit 1; } >&2
-+check-am: all-am
-+check: check-am
-+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \
-+		$(HEADERS)
-+install-binPROGRAMS: install-libLTLIBRARIES
-+
-+
-+installdirs:
-+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(pkgincludedir)
-+
-+install: install-am
-+install-exec: install-exec-am
-+install-data: install-data-am
-+uninstall: uninstall-am
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+
-+installcheck: installcheck-am
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	  INSTALL_STRIP_FLAG=-s \
-+	  `test -z '$(STRIP)' || \
-+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-+mostlyclean-generic:
-+
-+clean-generic:
-+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-+
-+distclean-generic:
-+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-+
-+maintainer-clean-generic:
-+	@echo "This command is intended for maintainers to use"
-+	@echo "it deletes files that may require special tools to rebuild."
-+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-+clean: clean-am
-+
-+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
-+	clean-libtool mostlyclean-am
-+
-+distclean: distclean-am
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+distclean-am: clean-am distclean-compile distclean-generic \
-+	distclean-libtool distclean-tags
-+
-+dvi: dvi-am
-+
-+dvi-am:
-+
-+info: info-am
-+
-+info-am:
-+
-+install-data-am: install-man install-pkgconfigDATA \
-+	install-pkgincludeHEADERS
-+
-+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
-+	install-libLTLIBRARIES
-+
-+install-info: install-info-am
-+
-+install-man: install-man1
-+
-+installcheck-am:
-+
-+maintainer-clean: maintainer-clean-am
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+	-rm -rf autom4te.cache
-+maintainer-clean-am: distclean-am maintainer-clean-generic
-+
-+mostlyclean: mostlyclean-am
-+
-+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-+	mostlyclean-libtool
-+
-+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
-+	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \
-+	uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
-+
-+uninstall-man: uninstall-man1
-+
-+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
-+	clean-generic clean-libLTLIBRARIES clean-libtool dist dist-all \
-+	dist-bzip2 dist-gzip distcheck distclean distclean-compile \
-+	distclean-generic distclean-libtool distclean-tags \
-+	distcleancheck distdir dvi dvi-am info info-am install \
-+	install-am install-binPROGRAMS install-binSCRIPTS install-data \
-+	install-data-am install-exec install-exec-am install-info \
-+	install-info-am install-libLTLIBRARIES install-man install-man1 \
-+	install-pkgconfigDATA install-pkgincludeHEADERS install-strip \
-+	installcheck installcheck-am installdirs maintainer-clean \
-+	maintainer-clean-generic mostlyclean mostlyclean-compile \
-+	mostlyclean-generic mostlyclean-libtool tags uninstall \
-+	uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \
-+	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man \
-+	uninstall-man1 uninstall-pkgconfigDATA \
-+	uninstall-pkgincludeHEADERS
-+
-+
-+@SET_MAKE@
-+
-+# Libtool dependency
-+libtool: $(LIBTOOL_DEPS)
-+	$(SHELL) ./config.status --recheck
-+
-+doc: ijs_spec.ps ijs_spec.pdf
-+
-+# We don't use db2pdf because it can't handle embedded .eps
-+ijs_spec.ps: ijs_spec.sgml
-+	$(DB2PS) ijs_spec.sgml
-+
-+ijs_spec.pdf: ijs_spec.ps
-+	$(PS2PDF) ijs_spec.ps
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
diff --git a/print/ghostscript8/files/patch-ijs-configure b/print/ghostscript8/files/patch-ijs-configure
deleted file mode 100644
index 288d214e670a..000000000000
--- a/print/ghostscript8/files/patch-ijs-configure
+++ /dev/null
@@ -1,21669 +0,0 @@
---- /dev/null	2008-05-04 15:23:37.000000000 +0900
-+++ ijs/configure	2008-05-04 15:23:34.000000000 +0900
-@@ -0,0 +1,21666 @@
-+#! /bin/sh
-+# From configure.ac Revision: 5783 .
-+# Guess values for system-dependent variables and create Makefiles.
-+# Generated by GNU Autoconf 2.61 for ijs 0.35.
-+#
-+# Report bugs to <inkjet-list@linuxprinting.org>.
-+#
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+# This configure script is free software; the Free Software Foundation
-+# gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization.  ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+  echo "#! /bin/sh" >conf$$.sh
-+  echo  "exit 0"   >>conf$$.sh
-+  chmod +x conf$$.sh
-+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+    PATH_SEPARATOR=';'
-+  else
-+    PATH_SEPARATOR=:
-+  fi
-+  rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+  as_unset=unset
-+else
-+  as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.  Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" ""	$as_nl"
-+
-+# Find who we are.  Look in the path if we contain no directory separator.
-+case $0 in
-+  *[\\/]* ) as_myself=$0 ;;
-+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+     ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+  as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+  { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+  LC_TELEPHONE LC_TIME
-+do
-+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+    eval $as_var=C; export $as_var
-+  else
-+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+  fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+  as_basename=basename
-+else
-+  as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+    sed '/^.*\/\([^/][^/]*\)\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+if test "x$CONFIG_SHELL" = x; then
-+  if (eval ":") 2>/dev/null; then
-+  as_have_required=yes
-+else
-+  as_have_required=no
-+fi
-+
-+  if test $as_have_required = yes && 	 (eval ":
-+(as_func_return () {
-+  (exit \$1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+  as_lineno_1=\$LINENO
-+  as_lineno_2=\$LINENO
-+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+  :
-+else
-+  as_candidate_shells=
-+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  case $as_dir in
-+	 /*)
-+	   for as_base in sh bash ksh sh5; do
-+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+	   done;;
-+       esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+      for as_shell in $as_candidate_shells $SHELL; do
-+	 # Try only shells that exist, to save several forks.
-+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+  CONFIG_SHELL=$as_shell
-+	       as_have_required=yes
-+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+  (exit $1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+  break
-+fi
-+
-+fi
-+
-+      done
-+
-+      if test "x$CONFIG_SHELL" != x; then
-+  for as_var in BASH_ENV ENV
-+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+        done
-+        export CONFIG_SHELL
-+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+    if test $as_have_required = no; then
-+  echo This script requires a shell more modern than all the
-+      echo shells that I found on your system.  Please install a
-+      echo modern shell, or manually run the script under such a
-+      echo shell if you do have one.
-+      { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+  (exit \$1)
-+}
-+as_func_success () {
-+  as_func_return 0
-+}
-+as_func_failure () {
-+  as_func_return 1
-+}
-+as_func_ret_success () {
-+  return 0
-+}
-+as_func_ret_failure () {
-+  return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+  exitcode=1
-+  echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+  :
-+else
-+  exitcode=1
-+  echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+  exitcode=1
-+  echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+  :
-+else
-+  exitcode=1
-+  echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+  echo No shell found that supports shell functions.
-+  echo Please tell autoconf@gnu.org about your system,
-+  echo including any error possibly output before this
-+  echo message
-+}
-+
-+
-+
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+  # uniformly replaced by the line number.  The first 'sed' inserts a
-+  # line-number line after each line using $LINENO; the second 'sed'
-+  # does the real work.  The second script uses 'N' to pair each
-+  # line-number line with the line containing $LINENO, and appends
-+  # trailing '-' during substitution so that $LINENO is not a special
-+  # case at line end.
-+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-+  # E. McMahon (1931-1989) for sed's syntax.  :-)
-+  sed -n '
-+    p
-+    /[$]LINENO/=
-+  ' <$as_myself |
-+    sed '
-+      s/[$]LINENO.*/&-/
-+      t lineno
-+      b
-+      :lineno
-+      N
-+      :loop
-+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+      t loop
-+      s/-\n.*//
-+    ' >$as_me.lineno &&
-+  chmod +x "$as_me.lineno" ||
-+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+   { (exit 1); exit 1; }; }
-+
-+  # Don't try to exec as it changes $[0], causing all sort of problems
-+  # (the dirname of $[0] is not the place where we might find the
-+  # original and so on.  Autoconf is especially sensitive to this).
-+  . "./$as_me.lineno"
-+  # Exit status is that of the last command.
-+  exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
-+else
-+  as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+  case `echo 'x\c'` in
-+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-+  *)   ECHO_C='\c';;
-+  esac;;
-+*)
-+  ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+  rm -f conf$$.dir/conf$$.file
-+else
-+  rm -f conf$$.dir
-+  mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s='ln -s'
-+  # ... but there are two gotchas:
-+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+  # In both cases, we have to default to `cp -p'.
-+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+    as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s=ln
-+else
-+  as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+  as_mkdir_p=:
-+else
-+  test -d ./-p && rmdir ./-p
-+  as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+  as_test_x='test -x'
-+else
-+  if ls -dL / >/dev/null 2>&1; then
-+    as_ls_L_option=L
-+  else
-+    as_ls_L_option=
-+  fi
-+  as_test_x='
-+    eval sh -c '\''
-+      if test -d "$1"; then
-+        test -d "$1/.";
-+      else
-+	case $1 in
-+        -*)set "./$1";;
-+	esac;
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	???[sx]*):;;*)false;;esac;fi
-+    '\'' sh
-+  '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+  # Remove one level of quotation (which was required for Make).
-+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-+  ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X$1" = X--no-reexec; then
-+  # Discard the --no-reexec flag, and continue.
-+  shift
-+elif test "X$1" = X--fallback-echo; then
-+  # Avoid inline document here, it may be left over
-+  :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+  # Yippee, $echo works!
-+  :
-+else
-+  # Restart under the correct shell.
-+  exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+  # used as fallback echo
-+  shift
-+  cat <<EOF
-+$*
-+EOF
-+  exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+       echo_test_string=`eval $cmd` &&
-+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+    then
-+      break
-+    fi
-+  done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+   test "X$echo_testing_string" = "X$echo_test_string"; then
-+  :
-+else
-+  # The Solaris, AIX, and Digital Unix default echo programs unquote
-+  # backslashes.  This makes it impossible to quote backslashes using
-+  #   echo "$something" | sed 's/\\/\\\\/g'
-+  #
-+  # So, first we look for a working echo in the user's PATH.
-+
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for dir in $PATH /usr/ucb; do
-+    IFS="$lt_save_ifs"
-+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+       test "X$echo_testing_string" = "X$echo_test_string"; then
-+      echo="$dir/echo"
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+
-+  if test "X$echo" = Xecho; then
-+    # We didn't find a better echo, so look for alternatives.
-+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+       test "X$echo_testing_string" = "X$echo_test_string"; then
-+      # This shell has a builtin print -r that does the trick.
-+      echo='print -r'
-+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-+      # If we have ksh, try running configure again with it.
-+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+      export ORIGINAL_CONFIG_SHELL
-+      CONFIG_SHELL=/bin/ksh
-+      export CONFIG_SHELL
-+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-+    else
-+      # Try using printf.
-+      echo='printf %s\n'
-+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+	 test "X$echo_testing_string" = "X$echo_test_string"; then
-+	# Cool, printf works
-+	:
-+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+	   test "X$echo_testing_string" = 'X\t' &&
-+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+	   test "X$echo_testing_string" = "X$echo_test_string"; then
-+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+	export CONFIG_SHELL
-+	SHELL="$CONFIG_SHELL"
-+	export SHELL
-+	echo="$CONFIG_SHELL $0 --fallback-echo"
-+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+	   test "X$echo_testing_string" = 'X\t' &&
-+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+	   test "X$echo_testing_string" = "X$echo_test_string"; then
-+	echo="$CONFIG_SHELL $0 --fallback-echo"
-+      else
-+	# maybe with a smaller string...
-+	prev=:
-+
-+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+	  then
-+	    break
-+	  fi
-+	  prev="$cmd"
-+	done
-+
-+	if test "$prev" != 'sed 50q "$0"'; then
-+	  echo_test_string=`eval $prev`
-+	  export echo_test_string
-+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-+	else
-+	  # Oops.  We lost completely, so just stick with echo.
-+	  echo=echo
-+	fi
-+      fi
-+    fi
-+  fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-+fi
-+
-+
-+
-+
-+tagnames=${tagnames+${tagnames},}CXX
-+
-+tagnames=${tagnames+${tagnames},}F77
-+
-+exec 7<&0 </dev/null 6>&1
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_clean_files=
-+ac_config_libobj_dir=.
-+LIBOBJS=
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Identity of this package.
-+PACKAGE_NAME='ijs'
-+PACKAGE_TARNAME='ijs'
-+PACKAGE_VERSION='0.35'
-+PACKAGE_STRING='ijs 0.35'
-+PACKAGE_BUGREPORT='inkjet-list@linuxprinting.org'
-+
-+ac_unique_file="ijs.c"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#ifdef HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#ifdef HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#ifdef STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# ifdef HAVE_STDLIB_H
-+#  include <stdlib.h>
-+# endif
-+#endif
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-+#  include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#ifdef HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#ifdef HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#endif
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+INSTALL_PROGRAM
-+INSTALL_SCRIPT
-+INSTALL_DATA
-+PACKAGE
-+VERSION
-+ACLOCAL
-+AUTOCONF
-+AUTOMAKE
-+AUTOHEADER
-+MAKEINFO
-+AMTAR
-+install_sh
-+STRIP
-+INSTALL_STRIP_PROGRAM
-+AWK
-+SET_MAKE
-+IJS_MAJOR_VERSION
-+IJS_MINOR_VERSION
-+IJS_CURRENT_INTERFACE
-+IJS_INTERFACE_AGE
-+IJS_BINARY_AGE
-+IJS_VERSION
-+LT_RELEASE
-+LT_CURRENT
-+LT_REVISION
-+LT_AGE
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+DEPDIR
-+am__include
-+am__quote
-+AMDEP_TRUE
-+AMDEP_FALSE
-+AMDEPBACKSLASH
-+CCDEPMODE
-+SED
-+GREP
-+EGREP
-+LN_S
-+ECHO
-+AR
-+RANLIB
-+CPP
-+CXX
-+CXXFLAGS
-+ac_ct_CXX
-+CXXDEPMODE
-+CXXCPP
-+F77
-+FFLAGS
-+ac_ct_F77
-+LIBTOOL
-+LIBTOOL_DEPS
-+DB2PS
-+PS2PDF
-+SYSDEPS_WINDOWS_TRUE
-+SYSDEPS_WINDOWS_FALSE
-+IJS_CFLAGS
-+IJS_LIBS
-+IJS_DEPLIBS
-+ijs_cflags
-+ijs_libs
-+INCLUDES
-+LIBIJS_LIBS
-+LIBOBJS
-+LTLIBOBJS'
-+ac_subst_files=''
-+      ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CPP
-+CXX
-+CXXFLAGS
-+CCC
-+CXXCPP
-+F77
-+FFLAGS'
-+
-+
-+# Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
-+# The variables have the same names as the options, with
-+# dashes changed to underlines.
-+cache_file=/dev/null
-+exec_prefix=NONE
-+no_create=
-+no_recursion=
-+prefix=NONE
-+program_prefix=NONE
-+program_suffix=NONE
-+program_transform_name=s,x,x,
-+silent=
-+site=
-+srcdir=
-+verbose=
-+x_includes=NONE
-+x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
-+bindir='${exec_prefix}/bin'
-+sbindir='${exec_prefix}/sbin'
-+libexecdir='${exec_prefix}/libexec'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
-+sysconfdir='${prefix}/etc'
-+sharedstatedir='${prefix}/com'
-+localstatedir='${prefix}/var'
-+includedir='${prefix}/include'
-+oldincludedir='/usr/include'
-+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-+
-+ac_prev=
-+ac_dashdash=
-+for ac_option
-+do
-+  # If the previous option needs an argument, assign it.
-+  if test -n "$ac_prev"; then
-+    eval $ac_prev=\$ac_option
-+    ac_prev=
-+    continue
-+  fi
-+
-+  case $ac_option in
-+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+  *)	ac_optarg=yes ;;
-+  esac
-+
-+  # Accept the important Cygnus configure options, so we can diagnose typos.
-+
-+  case $ac_dashdash$ac_option in
-+  --)
-+    ac_dashdash=yes ;;
-+
-+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-+    ac_prev=bindir ;;
-+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-+    bindir=$ac_optarg ;;
-+
-+  -build | --build | --buil | --bui | --bu)
-+    ac_prev=build_alias ;;
-+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-+    build_alias=$ac_optarg ;;
-+
-+  -cache-file | --cache-file | --cache-fil | --cache-fi \
-+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-+    ac_prev=cache_file ;;
-+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-+    cache_file=$ac_optarg ;;
-+
-+  --config-cache | -C)
-+    cache_file=config.cache ;;
-+
-+  -datadir | --datadir | --datadi | --datad)
-+    ac_prev=datadir ;;
-+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-+    datadir=$ac_optarg ;;
-+
-+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+  | --dataroo | --dataro | --datar)
-+    ac_prev=datarootdir ;;
-+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+    datarootdir=$ac_optarg ;;
-+
-+  -disable-* | --disable-*)
-+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+    eval enable_$ac_feature=no ;;
-+
-+  -docdir | --docdir | --docdi | --doc | --do)
-+    ac_prev=docdir ;;
-+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+    docdir=$ac_optarg ;;
-+
-+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+    ac_prev=dvidir ;;
-+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+    dvidir=$ac_optarg ;;
-+
-+  -enable-* | --enable-*)
-+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+    eval enable_$ac_feature=\$ac_optarg ;;
-+
-+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-+  | --exec | --exe | --ex)
-+    ac_prev=exec_prefix ;;
-+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-+  | --exec=* | --exe=* | --ex=*)
-+    exec_prefix=$ac_optarg ;;
-+
-+  -gas | --gas | --ga | --g)
-+    # Obsolete; use --with-gas.
-+    with_gas=yes ;;
-+
-+  -help | --help | --hel | --he | -h)
-+    ac_init_help=long ;;
-+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+    ac_init_help=recursive ;;
-+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+    ac_init_help=short ;;
-+
-+  -host | --host | --hos | --ho)
-+    ac_prev=host_alias ;;
-+  -host=* | --host=* | --hos=* | --ho=*)
-+    host_alias=$ac_optarg ;;
-+
-+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+    ac_prev=htmldir ;;
-+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+  | --ht=*)
-+    htmldir=$ac_optarg ;;
-+
-+  -includedir | --includedir | --includedi | --included | --include \
-+  | --includ | --inclu | --incl | --inc)
-+    ac_prev=includedir ;;
-+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-+  | --includ=* | --inclu=* | --incl=* | --inc=*)
-+    includedir=$ac_optarg ;;
-+
-+  -infodir | --infodir | --infodi | --infod | --info | --inf)
-+    ac_prev=infodir ;;
-+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-+    infodir=$ac_optarg ;;
-+
-+  -libdir | --libdir | --libdi | --libd)
-+    ac_prev=libdir ;;
-+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-+    libdir=$ac_optarg ;;
-+
-+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-+  | --libexe | --libex | --libe)
-+    ac_prev=libexecdir ;;
-+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-+  | --libexe=* | --libex=* | --libe=*)
-+    libexecdir=$ac_optarg ;;
-+
-+  -localedir | --localedir | --localedi | --localed | --locale)
-+    ac_prev=localedir ;;
-+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+    localedir=$ac_optarg ;;
-+
-+  -localstatedir | --localstatedir | --localstatedi | --localstated \
-+  | --localstate | --localstat | --localsta | --localst | --locals)
-+    ac_prev=localstatedir ;;
-+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-+    localstatedir=$ac_optarg ;;
-+
-+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-+    ac_prev=mandir ;;
-+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-+    mandir=$ac_optarg ;;
-+
-+  -nfp | --nfp | --nf)
-+    # Obsolete; use --without-fp.
-+    with_fp=no ;;
-+
-+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+  | --no-cr | --no-c | -n)
-+    no_create=yes ;;
-+
-+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-+    no_recursion=yes ;;
-+
-+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-+  | --oldin | --oldi | --old | --ol | --o)
-+    ac_prev=oldincludedir ;;
-+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-+    oldincludedir=$ac_optarg ;;
-+
-+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-+    ac_prev=prefix ;;
-+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-+    prefix=$ac_optarg ;;
-+
-+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-+  | --program-pre | --program-pr | --program-p)
-+    ac_prev=program_prefix ;;
-+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-+    program_prefix=$ac_optarg ;;
-+
-+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-+  | --program-suf | --program-su | --program-s)
-+    ac_prev=program_suffix ;;
-+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-+    program_suffix=$ac_optarg ;;
-+
-+  -program-transform-name | --program-transform-name \
-+  | --program-transform-nam | --program-transform-na \
-+  | --program-transform-n | --program-transform- \
-+  | --program-transform | --program-transfor \
-+  | --program-transfo | --program-transf \
-+  | --program-trans | --program-tran \
-+  | --progr-tra | --program-tr | --program-t)
-+    ac_prev=program_transform_name ;;
-+  -program-transform-name=* | --program-transform-name=* \
-+  | --program-transform-nam=* | --program-transform-na=* \
-+  | --program-transform-n=* | --program-transform-=* \
-+  | --program-transform=* | --program-transfor=* \
-+  | --program-transfo=* | --program-transf=* \
-+  | --program-trans=* | --program-tran=* \
-+  | --progr-tra=* | --program-tr=* | --program-t=*)
-+    program_transform_name=$ac_optarg ;;
-+
-+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+    ac_prev=pdfdir ;;
-+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+    pdfdir=$ac_optarg ;;
-+
-+  -psdir | --psdir | --psdi | --psd | --ps)
-+    ac_prev=psdir ;;
-+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+    psdir=$ac_optarg ;;
-+
-+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+  | -silent | --silent | --silen | --sile | --sil)
-+    silent=yes ;;
-+
-+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-+    ac_prev=sbindir ;;
-+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-+  | --sbi=* | --sb=*)
-+    sbindir=$ac_optarg ;;
-+
-+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-+  | --sharedst | --shareds | --shared | --share | --shar \
-+  | --sha | --sh)
-+    ac_prev=sharedstatedir ;;
-+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-+  | --sha=* | --sh=*)
-+    sharedstatedir=$ac_optarg ;;
-+
-+  -site | --site | --sit)
-+    ac_prev=site ;;
-+  -site=* | --site=* | --sit=*)
-+    site=$ac_optarg ;;
-+
-+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-+    ac_prev=srcdir ;;
-+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-+    srcdir=$ac_optarg ;;
-+
-+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-+  | --syscon | --sysco | --sysc | --sys | --sy)
-+    ac_prev=sysconfdir ;;
-+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-+    sysconfdir=$ac_optarg ;;
-+
-+  -target | --target | --targe | --targ | --tar | --ta | --t)
-+    ac_prev=target_alias ;;
-+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-+    target_alias=$ac_optarg ;;
-+
-+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-+    verbose=yes ;;
-+
-+  -version | --version | --versio | --versi | --vers | -V)
-+    ac_init_version=: ;;
-+
-+  -with-* | --with-*)
-+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid package name: $ac_package" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+    eval with_$ac_package=\$ac_optarg ;;
-+
-+  -without-* | --without-*)
-+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid package name: $ac_package" >&2
-+   { (exit 1); exit 1; }; }
-+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+    eval with_$ac_package=no ;;
-+
-+  --x)
-+    # Obsolete; use --with-x.
-+    with_x=yes ;;
-+
-+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-+  | --x-incl | --x-inc | --x-in | --x-i)
-+    ac_prev=x_includes ;;
-+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-+    x_includes=$ac_optarg ;;
-+
-+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-+    ac_prev=x_libraries ;;
-+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-+    x_libraries=$ac_optarg ;;
-+
-+  -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+   { (exit 1); exit 1; }; }
-+    ;;
-+
-+  *=*)
-+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+    # Reject names that are not valid shell variable names.
-+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+   { (exit 1); exit 1; }; }
-+    eval $ac_envvar=\$ac_optarg
-+    export $ac_envvar ;;
-+
-+  *)
-+    # FIXME: should be removed in autoconf 3.0.
-+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-+    ;;
-+
-+  esac
-+done
-+
-+if test -n "$ac_prev"; then
-+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+  { echo "$as_me: error: missing argument to $ac_option" >&2
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# Be sure to have absolute directory names.
-+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+		datadir sysconfdir sharedstatedir localstatedir includedir \
-+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+		libdir localedir mandir
-+do
-+  eval ac_val=\$$ac_var
-+  case $ac_val in
-+    [\\/$]* | ?:[\\/]* )  continue;;
-+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-+  esac
-+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+   { (exit 1); exit 1; }; }
-+done
-+
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+  if test "x$build_alias" = x; then
-+    cross_compiling=maybe
-+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+    If a cross compiler is detected then cross compile mode will be used." >&2
-+  elif test "x$build_alias" != "x$host_alias"; then
-+    cross_compiling=yes
-+  fi
-+fi
-+
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-+
-+
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+  { echo "$as_me: error: Working directory cannot be determined" >&2
-+   { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+  { echo "$as_me: error: pwd does not report name of working directory" >&2
-+   { (exit 1); exit 1; }; }
-+
-+
-+# Find the source files, if location was not specified.
-+if test -z "$srcdir"; then
-+  ac_srcdir_defaulted=yes
-+  # Try the directory containing this script, then the parent directory.
-+  ac_confdir=`$as_dirname -- "$0" ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$0" : 'X\(//\)[^/]' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$0" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  srcdir=$ac_confdir
-+  if test ! -r "$srcdir/$ac_unique_file"; then
-+    srcdir=..
-+  fi
-+else
-+  ac_srcdir_defaulted=no
-+fi
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+   { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+   { (exit 1); exit 1; }; }
-+	pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+  srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+  eval ac_env_${ac_var}_value=\$${ac_var}
-+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+  # Omit some internal or obsolete options to make the list less imposing.
-+  # This message is too long to be a string in the A/UX 3.1 sh.
-+  cat <<_ACEOF
-+\`configure' configures ijs 0.35 to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE.  See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+  -h, --help              display this help and exit
-+      --help=short        display options specific to this package
-+      --help=recursive    display the short help of all the included packages
-+  -V, --version           display version information and exit
-+  -q, --quiet, --silent   do not print \`checking...' messages
-+      --cache-file=FILE   cache test results in FILE [disabled]
-+  -C, --config-cache      alias for \`--cache-file=config.cache'
-+  -n, --no-create         do not create output files
-+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-+
-+Installation directories:
-+  --prefix=PREFIX         install architecture-independent files in PREFIX
-+			  [$ac_default_prefix]
-+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-+			  [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+  --bindir=DIR           user executables [EPREFIX/bin]
-+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-+  --libexecdir=DIR       program executables [EPREFIX/libexec]
-+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-+  --libdir=DIR           object code libraries [EPREFIX/lib]
-+  --includedir=DIR       C header files [PREFIX/include]
-+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-+  --infodir=DIR          info documentation [DATAROOTDIR/info]
-+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-+  --mandir=DIR           man documentation [DATAROOTDIR/man]
-+  --docdir=DIR           documentation root [DATAROOTDIR/doc/ijs]
-+  --htmldir=DIR          html documentation [DOCDIR]
-+  --dvidir=DIR           dvi documentation [DOCDIR]
-+  --pdfdir=DIR           pdf documentation [DOCDIR]
-+  --psdir=DIR            ps documentation [DOCDIR]
-+_ACEOF
-+
-+  cat <<\_ACEOF
-+
-+Program names:
-+  --program-prefix=PREFIX            prepend PREFIX to installed program names
-+  --program-suffix=SUFFIX            append SUFFIX to installed program names
-+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-+
-+System types:
-+  --build=BUILD     configure for building on BUILD [guessed]
-+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+  case $ac_init_help in
-+     short | recursive ) echo "Configuration of ijs 0.35:";;
-+   esac
-+  cat <<\_ACEOF
-+
-+Optional Features:
-+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-+  --enable-shared[=PKGS]  build shared libraries [default=no]
-+  --enable-static[=PKGS]  build static libraries [default=yes]
-+  --enable-fast-install[=PKGS]
-+                          optimize for fast installation [default=yes]
-+  --disable-dependency-tracking Speeds up one-time builds
-+  --enable-dependency-tracking  Do not reject slow dependency extractors
-+  --disable-libtool-lock  avoid locking (might break parallel builds)
-+
-+Optional Packages:
-+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-+  --with-pic              try to use only PIC/non-PIC objects [default=use
-+                          both]
-+  --with-tags[=TAGS]      include additional configurations [automatic]
-+
-+Some influential environment variables:
-+  CC          C compiler command
-+  CFLAGS      C compiler flags
-+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-+              nonstandard directory <lib dir>
-+  LIBS        libraries to pass to the linker, e.g. -l<library>
-+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+              you have headers in a nonstandard directory <include dir>
-+  CPP         C preprocessor
-+  CXX         C++ compiler command
-+  CXXFLAGS    C++ compiler flags
-+  CXXCPP      C++ preprocessor
-+  F77         Fortran 77 compiler command
-+  FFLAGS      Fortran 77 compiler flags
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+Report bugs to <inkjet-list@linuxprinting.org>.
-+_ACEOF
-+ac_status=$?
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+  # If there are subdirs, report their specific --help.
-+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+    test -d "$ac_dir" || continue
-+    ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+  # A ".." for each directory in $ac_dir_suffix.
-+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+  case $ac_top_builddir_sub in
-+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+  esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+  .)  # We are building in place.
-+    ac_srcdir=.
-+    ac_top_srcdir=$ac_top_builddir_sub
-+    ac_abs_top_srcdir=$ac_pwd ;;
-+  [\\/]* | ?:[\\/]* )  # Absolute name.
-+    ac_srcdir=$srcdir$ac_dir_suffix;
-+    ac_top_srcdir=$srcdir
-+    ac_abs_top_srcdir=$srcdir ;;
-+  *) # Relative name.
-+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+    ac_top_srcdir=$ac_top_build_prefix$srcdir
-+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+    cd "$ac_dir" || { ac_status=$?; continue; }
-+    # Check for guested configure.
-+    if test -f "$ac_srcdir/configure.gnu"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+    elif test -f "$ac_srcdir/configure"; then
-+      echo &&
-+      $SHELL "$ac_srcdir/configure" --help=recursive
-+    else
-+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+    fi || ac_status=$?
-+    cd "$ac_pwd" || { ac_status=$?; break; }
-+  done
-+fi
-+
-+test -n "$ac_init_help" && exit $ac_status
-+if $ac_init_version; then
-+  cat <<\_ACEOF
-+ijs configure 0.35
-+generated by GNU Autoconf 2.61
-+
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+  exit
-+fi
-+cat >config.log <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by ijs $as_me 0.35, which was
-+generated by GNU Autoconf 2.61.  Invocation command line was
-+
-+  $ $0 $@
-+
-+_ACEOF
-+exec 5>>config.log
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-+
-+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  echo "PATH: $as_dir"
-+done
-+IFS=$as_save_IFS
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+  for ac_arg
-+  do
-+    case $ac_arg in
-+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+    | -silent | --silent | --silen | --sile | --sil)
-+      continue ;;
-+    *\'*)
-+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+    esac
-+    case $ac_pass in
-+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+    2)
-+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+      if test $ac_must_keep_next = true; then
-+	ac_must_keep_next=false # Got value, back to normal.
-+      else
-+	case $ac_arg in
-+	  *=* | --config-cache | -C | -disable-* | --disable-* \
-+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+	  | -with-* | --with-* | -without-* | --without-* | --x)
-+	    case "$ac_configure_args0 " in
-+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+	    esac
-+	    ;;
-+	  -* ) ac_must_keep_next=true ;;
-+	esac
-+      fi
-+      ac_configure_args="$ac_configure_args '$ac_arg'"
-+      ;;
-+    esac
-+  done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log.  We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-+trap 'exit_status=$?
-+  # Save into config.log some information that might help in debugging.
-+  {
-+    echo
-+
-+    cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+    echo
-+    # The following way of writing the cache mishandles newlines in values,
-+(
-+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+    eval ac_val=\$$ac_var
-+    case $ac_val in #(
-+    *${as_nl}*)
-+      case $ac_var in #(
-+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+      esac
-+      case $ac_var in #(
-+      _ | IFS | as_nl) ;; #(
-+      *) $as_unset $ac_var ;;
-+      esac ;;
-+    esac
-+  done
-+  (set) 2>&1 |
-+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+    *${as_nl}ac_space=\ *)
-+      sed -n \
-+	"s/'\''/'\''\\\\'\'''\''/g;
-+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+      ;; #(
-+    *)
-+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+      ;;
-+    esac |
-+    sort
-+)
-+    echo
-+
-+    cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+    echo
-+    for ac_var in $ac_subst_vars
-+    do
-+      eval ac_val=\$$ac_var
-+      case $ac_val in
-+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+      esac
-+      echo "$ac_var='\''$ac_val'\''"
-+    done | sort
-+    echo
-+
-+    if test -n "$ac_subst_files"; then
-+      cat <<\_ASBOX
-+## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##
-+_ASBOX
-+      echo
-+      for ac_var in $ac_subst_files
-+      do
-+	eval ac_val=\$$ac_var
-+	case $ac_val in
-+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+	esac
-+	echo "$ac_var='\''$ac_val'\''"
-+      done | sort
-+      echo
-+    fi
-+
-+    if test -s confdefs.h; then
-+      cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+      echo
-+      cat confdefs.h
-+      echo
-+    fi
-+    test "$ac_signal" != 0 &&
-+      echo "$as_me: caught signal $ac_signal"
-+    echo "$as_me: exit $exit_status"
-+  } >&5
-+  rm -f core *.core core.conftest.* &&
-+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-+    exit $exit_status
-+' 0
-+for ac_signal in 1 2 13 15; do
-+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -f -r conftest* confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -n "$CONFIG_SITE"; then
-+  set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+  set x "$ac_default_prefix/share/config.site" \
-+	"$ac_default_prefix/etc/config.site"
-+fi
-+shift
-+for ac_site_file
-+do
-+  if test -r "$ac_site_file"; then
-+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+    sed 's/^/| /' "$ac_site_file" >&5
-+    . "$ac_site_file"
-+  fi
-+done
-+
-+if test -r "$cache_file"; then
-+  # Some versions of bash will fail to source /dev/null (special
-+  # files actually), so we avoid doing that.
-+  if test -f "$cache_file"; then
-+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+    case $cache_file in
-+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+      *)                      . "./$cache_file";;
-+    esac
-+  fi
-+else
-+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+  >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in $ac_precious_vars; do
-+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+  eval ac_new_set=\$ac_env_${ac_var}_set
-+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+  eval ac_new_val=\$ac_env_${ac_var}_value
-+  case $ac_old_set,$ac_new_set in
-+    set,)
-+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+      ac_cache_corrupted=: ;;
-+    ,set)
-+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+      ac_cache_corrupted=: ;;
-+    ,);;
-+    *)
-+      if test "x$ac_old_val" != "x$ac_new_val"; then
-+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-+echo "$as_me:   former value:  $ac_old_val" >&2;}
-+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-+echo "$as_me:   current value: $ac_new_val" >&2;}
-+	ac_cache_corrupted=:
-+      fi;;
-+  esac
-+  # Pass precious variables to config.status.
-+  if test "$ac_new_set" = set; then
-+    case $ac_new_val in
-+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+    *) ac_arg=$ac_var=$ac_new_val ;;
-+    esac
-+    case " $ac_configure_args " in
-+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+    esac
-+  fi
-+done
-+if $ac_cache_corrupted; then
-+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+
-+
-+
-+
-+IJS_LIBS="-lijs"
-+
-+IJS_MAJOR_VERSION=0
-+IJS_MINOR_VERSION=35
-+IJS_EXTRA_VERSION=
-+
-+IJS_CURRENT_INTERFACE=1
-+IJS_INTERFACE_AGE=1
-+IJS_BINARY_AGE=0
-+IJS_VERSION=0.35
-+
-+
-+
-+
-+
-+
-+
-+am__api_version="1.6"
-+ac_aux_dir=
-+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-+  if test -f "$ac_dir/install-sh"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install-sh -c"
-+    break
-+  elif test -f "$ac_dir/install.sh"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install.sh -c"
-+    break
-+  elif test -f "$ac_dir/shtool"; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/shtool install -c"
-+    break
-+  fi
-+done
-+if test -z "$ac_aux_dir"; then
-+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-+
-+
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+  ./ | .// | /cC/* | \
-+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+  /usr/ucb/* ) ;;
-+  *)
-+    # OSF1 and SCO ODT 3.0 have their own names for install.
-+    # Don't use installbsd from OSF since it installs stuff as root
-+    # by default.
-+    for ac_prog in ginstall scoinst install; do
-+      for ac_exec_ext in '' $ac_executable_extensions; do
-+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+	  if test $ac_prog = install &&
-+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  elif test $ac_prog = install &&
-+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # program-specific install script used by HP pwplus--don't use.
-+	    :
-+	  else
-+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+	    break 3
-+	  fi
-+	fi
-+      done
-+    done
-+    ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL=$ac_cv_path_install
-+  else
-+    # As a last resort, use the slow shell script.  Don't cache a
-+    # value for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the value is a relative name.
-+    INSTALL=$ac_install_sh
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-+# Just in case
-+sleep 1
-+echo timestamp > conftest.file
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments.  Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-+   if test "$*" = "X"; then
-+      # -L didn't work.
-+      set X `ls -t $srcdir/configure conftest.file`
-+   fi
-+   rm -f conftest.file
-+   if test "$*" != "X $srcdir/configure conftest.file" \
-+      && test "$*" != "X conftest.file $srcdir/configure"; then
-+
-+      # If neither matched, then we have a broken ls.  This can happen
-+      # if, for instance, CONFIG_SHELL is bash and it inherits a
-+      # broken ls alias from the environment.  This has actually
-+      # happened.  Such a system could not be considered "sane".
-+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" >&2;}
-+   { (exit 1); exit 1; }; }
-+   fi
-+
-+   test "$2" = conftest.file
-+   )
-+then
-+   # Ok.
-+   :
-+else
-+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+test "$program_prefix" != NONE &&
-+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-+# Double any \ or $.  echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm -f conftest.sed
-+
-+
-+# expand $ac_aux_dir to an absolute path
-+am_aux_dir=`cd $ac_aux_dir && pwd`
-+
-+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-+# Use eval to expand $SHELL
-+if eval "$MISSING --run true"; then
-+  am_missing_run="$MISSING --run "
-+else
-+  am_missing_run=
-+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+fi
-+
-+for ac_prog in gawk mawk nawk awk
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AWK+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$AWK"; then
-+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_AWK="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AWK=$ac_cv_prog_AWK
-+if test -n "$AWK"; then
-+  { echo "$as_me:$LINENO: result: $AWK" >&5
-+echo "${ECHO_T}$AWK" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$AWK" && break
-+done
-+
-+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.make <<\_ACEOF
-+SHELL = /bin/sh
-+all:
-+	@echo '@@@%%%=$(MAKE)=@@@%%%'
-+_ACEOF
-+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-+case `${MAKE-make} -f conftest.make 2>/dev/null` in
-+  *@@@%%%=?*=@@@%%%*)
-+    eval ac_cv_prog_make_${ac_make}_set=yes;;
-+  *)
-+    eval ac_cv_prog_make_${ac_make}_set=no;;
-+esac
-+rm -f conftest.make
-+fi
-+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+  SET_MAKE=
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+  SET_MAKE="MAKE=${MAKE-make}"
-+fi
-+
-+ # test to see if srcdir already configured
-+if test "`cd $srcdir && pwd`" != "`pwd`" &&
-+   test -f $srcdir/config.status; then
-+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+# Define the identity of the package.
-+ PACKAGE=ijs
-+ VERSION=0.35
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE "$PACKAGE"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define VERSION "$VERSION"
-+_ACEOF
-+
-+# Some tools Automake needs.
-+
-+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-+
-+
-+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-+
-+
-+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-+
-+
-+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-+
-+
-+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-+
-+
-+AMTAR=${AMTAR-"${am_missing_run}tar"}
-+
-+install_sh=${install_sh-"$am_aux_dir/install-sh"}
-+
-+# Installed binaries are usually stripped using `strip' when the user
-+# run `make install-strip'.  However `strip' might not be the right
-+# tool to use in cross-compilation environments, therefore Automake
-+# will honor the `STRIP' environment variable to overrule this program.
-+if test "$cross_compiling" != no; then
-+  if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$STRIP"; then
-+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+  { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+  ac_ct_STRIP=$STRIP
-+  # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_STRIP"; then
-+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_STRIP="strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_STRIP" = x; then
-+    STRIP=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    STRIP=$ac_ct_STRIP
-+  fi
-+else
-+  STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+fi
-+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-+
-+# We need awk for the "check" target.  The system "awk" is bad on
-+# some platforms.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+LT_RELEASE=$IJS_MAJOR_VERSION.$IJS_MINOR_VERSION
-+LT_CURRENT=$IJS_CURRENT_INTERFACE
-+LT_REVISION=$IJS_INTERFACE_AGE
-+LT_AGE=$IJS_BINARY_AGE
-+
-+
-+
-+
-+
-+
-+# Check whether --enable-shared was given.
-+if test "${enable_shared+set}" = set; then
-+  enableval=$enable_shared; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_shared=yes ;;
-+    no) enable_shared=no ;;
-+    *)
-+      enable_shared=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_shared=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_shared=no
-+fi
-+
-+
-+
-+# Check whether --enable-static was given.
-+if test "${enable_static+set}" = set; then
-+  enableval=$enable_static; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_static=yes ;;
-+    no) enable_static=no ;;
-+    *)
-+     enable_static=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_static=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_static=yes
-+fi
-+
-+
-+# Check whether --enable-fast-install was given.
-+if test "${enable_fast_install+set}" = set; then
-+  enableval=$enable_fast_install; p=${PACKAGE-default}
-+    case $enableval in
-+    yes) enable_fast_install=yes ;;
-+    no) enable_fast_install=no ;;
-+    *)
-+      enable_fast_install=no
-+      # Look at the argument we got.  We use all the common list separators.
-+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+      for pkg in $enableval; do
-+	IFS="$lt_save_ifs"
-+	if test "X$pkg" = "X$p"; then
-+	  enable_fast_install=yes
-+	fi
-+      done
-+      IFS="$lt_save_ifs"
-+      ;;
-+    esac
-+else
-+  enable_fast_install=yes
-+fi
-+
-+
-+# Make sure we can run config.sub.
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-+if test "${ac_cv_build+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
-+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+   { (exit 1); exit 1; }; }
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+   { (exit 1); exit 1; }; };;
-+esac
-+build=$ac_cv_build
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-+
-+
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-+if test "${ac_cv_host+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test "x$host_alias" = x; then
-+  ac_cv_host=$ac_cv_build
-+else
-+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+   { (exit 1); exit 1; }; };;
-+esac
-+host=$ac_cv_host
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-+
-+
-+rm -f .deps 2>/dev/null
-+mkdir .deps 2>/dev/null
-+if test -d .deps; then
-+  DEPDIR=.deps
-+else
-+  # MS-DOS does not allow filenames that begin with a dot.
-+  DEPDIR=_deps
-+fi
-+rmdir .deps 2>/dev/null
-+
-+
-+ac_config_commands="$ac_config_commands depfiles"
-+
-+
-+am_make=${MAKE-make}
-+cat > confinc << 'END'
-+doit:
-+	@echo done
-+END
-+# If we don't find an include directive, just comment out the code.
-+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-+am__include="#"
-+am__quote=
-+_am_result=none
-+# First try GNU make style include.
-+echo "include confinc" > confmf
-+# We grep out `Entering directory' and `Leaving directory'
-+# messages which can occur if `w' ends up in MAKEFLAGS.
-+# In particular we don't look at `^make:' because GNU make might
-+# be invoked under some other name (usually "gmake"), in which
-+# case it prints its new name instead of `make'.
-+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-+   am__include=include
-+   am__quote=
-+   _am_result=GNU
-+fi
-+# Now try BSD make style include.
-+if test "$am__include" = "#"; then
-+   echo '.include "confinc"' > confmf
-+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-+      am__include=.include
-+      am__quote="\""
-+      _am_result=BSD
-+   fi
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: result: $_am_result" >&5
-+echo "${ECHO_T}$_am_result" >&6; }
-+rm -f confinc confmf
-+
-+# Check whether --enable-dependency-tracking was given.
-+if test "${enable_dependency_tracking+set}" = set; then
-+  enableval=$enable_dependency_tracking;
-+fi
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+  am_depcomp="$ac_aux_dir/depcomp"
-+  AMDEPBACKSLASH='\'
-+fi
-+
-+
-+if test "x$enable_dependency_tracking" != xno; then
-+  AMDEP_TRUE=
-+  AMDEP_FALSE='#'
-+else
-+  AMDEP_TRUE='#'
-+  AMDEP_FALSE=
-+fi
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+  ac_ct_CC=$CC
-+  # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+else
-+  CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+          if test -n "$ac_tool_prefix"; then
-+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  fi
-+fi
-+if test -z "$CC"; then
-+  # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+       ac_prog_rejected=yes
-+       continue
-+     fi
-+    ac_cv_prog_CC="cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+  # We found a bogon in the path, so make sure we never use it.
-+  set dummy $ac_cv_prog_CC
-+  shift
-+  if test $# != 0; then
-+    # We chose a different compiler from the bogus one.
-+    # However, it has the same basename, so the bogon will be chosen
-+    # first if we set CC to just the basename; use the full file name.
-+    shift
-+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+  fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+  if test -n "$ac_tool_prefix"; then
-+  for ac_prog in cl.exe
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CC" && break
-+  done
-+fi
-+if test -z "$CC"; then
-+  ac_ct_CC=$CC
-+  for ac_prog in cl.exe
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CC" && break
-+done
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort.  b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions.  Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+  esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link_default") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
-+do
-+  test -f "$ac_file" || continue
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-+	;;
-+    [ab].out )
-+	# We found the default executable, but exeext='' is most
-+	# certainly right.
-+	break;;
-+    *.* )
-+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+	then :; else
-+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+	fi
-+	# We set ac_cv_exeext here because the later test for it is not
-+	# safe: cross compilers may not add the suffix if given an `-o'
-+	# argument, so we may need to know it at that point already.
-+	# Even if this section looks crufty: it has the advantage of
-+	# actually working.
-+	break;;
-+    * )
-+	break;;
-+  esac
-+done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
-+else
-+  ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+   { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+
-+# Check that the compiler produces executables we can run.  If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+  if { ac_try='./$ac_file'
-+  { (case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+    cross_compiling=no
-+  else
-+    if test "$cross_compiling" = maybe; then
-+	cross_compiling=yes
-+    else
-+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+    fi
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check that the compiler produces executables we can run.  If not, either
-+# the compiler is broken, or we cross compile.
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+  test -f "$ac_file" || continue
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+	  break;;
-+    * ) break;;
-+  esac
-+done
-+else
-+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-+if test "${ac_cv_objext+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  for ac_file in conftest.o conftest.obj conftest.*; do
-+  test -f "$ac_file" || continue;
-+  case $ac_file in
-+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+       break;;
-+  esac
-+done
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_c_werror_flag=$ac_c_werror_flag
-+   ac_c_werror_flag=yes
-+   ac_cv_prog_cc_g=no
-+   CFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_c_werror_flag=$ac_save_c_werror_flag
-+	 CFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+  CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+  if test "$GCC" = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-g"
-+  fi
-+else
-+  if test "$GCC" = yes; then
-+    CFLAGS="-O2"
-+  else
-+    CFLAGS=
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-+   function prototypes and stuff, but not '\xHH' hex character constants.
-+   These don't provoke an error unfortunately, instead are silently treated
-+   as 'x'.  The following induces an error, until -std is added to get
-+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-+   array size at least.  It's necessary to write '\x00'==0 to get something
-+   that's true only with -std.  */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+   inside strings and character constants.  */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_c89=$ac_arg
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+  test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+  x)
-+    { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+  xno)
-+    { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+  *)
-+    CC="$CC $ac_cv_prog_cc_c89"
-+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CC"   am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CC_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CC_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+
-+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-+if test "${lt_cv_path_SED+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for lt_ac_prog in sed gsed; do
-+    for ac_exec_ext in '' $ac_executable_extensions; do
-+      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+      fi
-+    done
-+  done
-+done
-+IFS=$as_save_IFS
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+  test ! -f $lt_ac_sed && continue
-+  cat /dev/null > conftest.in
-+  lt_ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+  # Check for GNU sed and select it if it is found.
-+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+    lt_cv_path_SED=$lt_ac_sed
-+    break
-+  fi
-+  while true; do
-+    cat conftest.in conftest.in >conftest.tmp
-+    mv conftest.tmp conftest.in
-+    cp conftest.in conftest.nl
-+    echo >>conftest.nl
-+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+    cmp -s conftest.out conftest.nl || break
-+    # 10000 chars as input seems more than enough
-+    test $lt_ac_count -gt 10 && break
-+    lt_ac_count=`expr $lt_ac_count + 1`
-+    if test $lt_ac_count -gt $lt_ac_max; then
-+      lt_ac_max=$lt_ac_count
-+      lt_cv_path_SED=$lt_ac_sed
-+    fi
-+  done
-+done
-+
-+fi
-+
-+SED=$lt_cv_path_SED
-+
-+{ echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_prog in grep ggrep; do
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+    # Check for GNU ac_path_GREP and select it if it is found.
-+  # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+  ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+  while :
-+  do
-+    cat "conftest.in" "conftest.in" >"conftest.tmp"
-+    mv "conftest.tmp" "conftest.in"
-+    cp "conftest.in" "conftest.nl"
-+    echo 'GREP' >> "conftest.nl"
-+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+    ac_count=`expr $ac_count + 1`
-+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+      # Best one so far, save it but keep looking for a better one
-+      ac_cv_path_GREP="$ac_path_GREP"
-+      ac_path_GREP_max=$ac_count
-+    fi
-+    # 10*(2^10) chars as input seems more than enough
-+    test $ac_count -gt 10 && break
-+  done
-+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+    $ac_path_GREP_found && break 3
-+  done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+  ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+   then ac_cv_path_EGREP="$GREP -E"
-+   else
-+     # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_prog in egrep; do
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+    # Check for GNU ac_path_EGREP and select it if it is found.
-+  # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+  ac_count=0
-+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+  while :
-+  do
-+    cat "conftest.in" "conftest.in" >"conftest.tmp"
-+    mv "conftest.tmp" "conftest.in"
-+    cp "conftest.in" "conftest.nl"
-+    echo 'EGREP' >> "conftest.nl"
-+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+    ac_count=`expr $ac_count + 1`
-+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+      # Best one so far, save it but keep looking for a better one
-+      ac_cv_path_EGREP="$ac_path_EGREP"
-+      ac_path_EGREP_max=$ac_count
-+    fi
-+    # 10*(2^10) chars as input seems more than enough
-+    test $ac_count -gt 10 && break
-+  done
-+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+    $ac_path_EGREP_found && break 3
-+  done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+  ac_cv_path_EGREP=$EGREP
-+fi
-+
-+
-+   fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+  with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+  # Check if gcc -print-prog-name=ld gives a path.
-+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+  case $host in
-+  *-*-mingw*)
-+    # gcc leaves a trailing carriage return which upsets mingw
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+  *)
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+  esac
-+  case $ac_prog in
-+    # Accept absolute paths.
-+    [\\/]* | ?:[\\/]*)
-+      re_direlt='/[^/][^/]*/\.\./'
-+      # Canonicalize the pathname of ld
-+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+      done
-+      test -z "$LD" && LD="$ac_prog"
-+      ;;
-+  "")
-+    # If it fails, then pretend we aren't using GCC.
-+    ac_prog=ld
-+    ;;
-+  *)
-+    # If it is relative, then search for the first ld in PATH.
-+    with_gnu_ld=unknown
-+    ;;
-+  esac
-+elif test "$with_gnu_ld" = yes; then
-+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$LD"; then
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for ac_dir in $PATH; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+      lt_cv_path_LD="$ac_dir/$ac_prog"
-+      # Check to see if the program is GNU ld.  I'd rather use --version,
-+      # but apparently some variants of GNU ld only accept -v.
-+      # Break only if it was the GNU/non-GNU ld that we prefer.
-+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+      *GNU* | *'with BFD'*)
-+	test "$with_gnu_ld" != no && break
-+	;;
-+      *)
-+	test "$with_gnu_ld" != yes && break
-+	;;
-+      esac
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+else
-+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+  { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+   { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+  lt_cv_prog_gnu_ld=yes
-+  ;;
-+*)
-+  lt_cv_prog_gnu_ld=no
-+  ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_ld_reload_flag='-r'
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+  darwin*)
-+    if test "$GCC" = yes; then
-+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+    else
-+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+    fi
-+    ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-+if test "${lt_cv_path_NM+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$NM"; then
-+  # Let the user override the test.
-+  lt_cv_path_NM="$NM"
-+else
-+  lt_nm_to_check="${ac_tool_prefix}nm"
-+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+    lt_nm_to_check="$lt_nm_to_check nm"
-+  fi
-+  for lt_tmp_nm in $lt_nm_to_check; do
-+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+      IFS="$lt_save_ifs"
-+      test -z "$ac_dir" && ac_dir=.
-+      tmp_nm="$ac_dir/$lt_tmp_nm"
-+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+	# Check to see if the nm accepts a BSD-compat flag.
-+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+	#   nm: unknown option "B" ignored
-+	# Tru64's nm complains that /dev/null is an invalid object file
-+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+	*/dev/null* | *'Invalid file or object type'*)
-+	  lt_cv_path_NM="$tmp_nm -B"
-+	  break
-+	  ;;
-+	*)
-+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+	  */dev/null*)
-+	    lt_cv_path_NM="$tmp_nm -p"
-+	    break
-+	    ;;
-+	  *)
-+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+	    continue # so that we can try to find one that supports BSD flags
-+	    ;;
-+	  esac
-+	  ;;
-+	esac
-+      fi
-+    done
-+    IFS="$lt_save_ifs"
-+  done
-+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-+NM="$lt_cv_path_NM"
-+
-+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix4* | aix5*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+beos*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+bsdi[45]*)
-+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+  lt_cv_file_magic_cmd='/usr/bin/file -L'
-+  lt_cv_file_magic_test_file=/shlib/libc.so
-+  ;;
-+
-+cygwin*)
-+  # func_win32_libid is a shell function defined in ltmain.sh
-+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+  lt_cv_file_magic_cmd='func_win32_libid'
-+  ;;
-+
-+mingw* | pw32*)
-+  # Base MSYS/MinGW do not provide the 'file' command needed by
-+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-+  # unless we find 'file', for example because we are cross-compiling.
-+  if ( file / ) >/dev/null 2>&1; then
-+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+    lt_cv_file_magic_cmd='func_win32_libid'
-+  else
-+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+    lt_cv_file_magic_cmd='$OBJDUMP -f'
-+  fi
-+  ;;
-+
-+darwin* | rhapsody*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+    case $host_cpu in
-+    i*86 )
-+      # Not sure whether the presence of OpenBSD here was a mistake.
-+      # Let's accept both of them until this is cleared up.
-+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-+      lt_cv_file_magic_cmd=/usr/bin/file
-+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+      ;;
-+    esac
-+  else
-+    lt_cv_deplibs_check_method=pass_all
-+  fi
-+  ;;
-+
-+gnu*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+hpux10.20* | hpux11*)
-+  lt_cv_file_magic_cmd=/usr/bin/file
-+  case $host_cpu in
-+  ia64*)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+    ;;
-+  hppa*64*)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+    ;;
-+  *)
-+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+    ;;
-+  esac
-+  ;;
-+
-+interix[3-9]*)
-+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $LD in
-+  *-32|*"-32 ") libmagic=32-bit;;
-+  *-n32|*"-n32 ") libmagic=N32;;
-+  *-64|*"-64 ") libmagic=64-bit;;
-+  *) libmagic=never-match;;
-+  esac
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+netbsd*)
-+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+  else
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-+  fi
-+  ;;
-+
-+newos6*)
-+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-+  lt_cv_file_magic_cmd=/usr/bin/file
-+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+  ;;
-+
-+nto-qnx*)
-+  lt_cv_deplibs_check_method=unknown
-+  ;;
-+
-+openbsd*)
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-+  else
-+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+  fi
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+rdos*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+solaris*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  case $host_vendor in
-+  motorola)
-+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+    ;;
-+  ncr)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  sequent)
-+    lt_cv_file_magic_cmd='/bin/file'
-+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+    ;;
-+  sni)
-+    lt_cv_file_magic_cmd='/bin/file'
-+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-+    lt_cv_file_magic_test_file=/lib/libc.so
-+    ;;
-+  siemens)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  pc)
-+    lt_cv_deplibs_check_method=pass_all
-+    ;;
-+  esac
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  lt_cv_deplibs_check_method=pass_all
-+  ;;
-+esac
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+
-+
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+  enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *ELF-32*)
-+      HPUX_IA64_MODE="32"
-+      ;;
-+    *ELF-64*)
-+      HPUX_IA64_MODE="64"
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+*-*-irix6*)
-+  # Find out which ABI we are using.
-+  echo '#line 4266 "configure"' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+   if test "$lt_cv_prog_gnu_ld" = yes; then
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *32-bit*)
-+      LD="${LD-ld} -melf32bsmip"
-+      ;;
-+    *N32*)
-+      LD="${LD-ld} -melf32bmipn32"
-+      ;;
-+    *64-bit*)
-+      LD="${LD-ld} -melf64bmip"
-+      ;;
-+    esac
-+   else
-+    case `/usr/bin/file conftest.$ac_objext` in
-+    *32-bit*)
-+      LD="${LD-ld} -32"
-+      ;;
-+    *N32*)
-+      LD="${LD-ld} -n32"
-+      ;;
-+    *64-bit*)
-+      LD="${LD-ld} -64"
-+      ;;
-+    esac
-+   fi
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-+s390*-*linux*|sparc*-*linux*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.o` in
-+    *32-bit*)
-+      case $host in
-+        x86_64-*kfreebsd*-gnu)
-+          LD="${LD-ld} -m elf_i386_fbsd"
-+          ;;
-+        x86_64-*linux*)
-+          LD="${LD-ld} -m elf_i386"
-+          ;;
-+        ppc64-*linux*|powerpc64-*linux*)
-+          LD="${LD-ld} -m elf32ppclinux"
-+          ;;
-+        s390x-*linux*)
-+          LD="${LD-ld} -m elf_s390"
-+          ;;
-+        sparc64-*linux*)
-+          LD="${LD-ld} -m elf32_sparc"
-+          ;;
-+      esac
-+      ;;
-+    *64-bit*)
-+      case $host in
-+        x86_64-*kfreebsd*-gnu)
-+          LD="${LD-ld} -m elf_x86_64_fbsd"
-+          ;;
-+        x86_64-*linux*)
-+          LD="${LD-ld} -m elf_x86_64"
-+          ;;
-+        ppc*-*linux*|powerpc*-*linux*)
-+          LD="${LD-ld} -m elf64ppc"
-+          ;;
-+        s390*-*linux*)
-+          LD="${LD-ld} -m elf64_s390"
-+          ;;
-+        sparc*-*linux*)
-+          LD="${LD-ld} -m elf64_sparc"
-+          ;;
-+      esac
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+*-*-sco3.2v5*)
-+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+  SAVE_CFLAGS="$CFLAGS"
-+  CFLAGS="$CFLAGS -belf"
-+  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+     cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  lt_cv_cc_needs_belf=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	lt_cv_cc_needs_belf=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+     ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
-+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+    CFLAGS="$SAVE_CFLAGS"
-+  fi
-+  ;;
-+sparc*-*solaris*)
-+  # Find out which ABI we are using.
-+  echo 'int i;' > conftest.$ac_ext
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    case `/usr/bin/file conftest.o` in
-+    *64-bit*)
-+      case $lt_cv_prog_gnu_ld in
-+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+      *)    LD="${LD-ld} -64" ;;
-+      esac
-+      ;;
-+    esac
-+  fi
-+  rm -rf conftest*
-+  ;;
-+
-+
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+  CPP=
-+fi
-+if test -z "$CPP"; then
-+  if test "${ac_cv_prog_CPP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+      # Double quotes because CPP needs to be expanded
-+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+    do
-+      ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  break
-+fi
-+
-+    done
-+    ac_cv_prog_CPP=$CPP
-+
-+fi
-+  CPP=$ac_cv_prog_CPP
-+else
-+  ac_cv_prog_CPP=$CPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  :
-+else
-+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-+if test "${ac_cv_header_stdc+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_header_stdc=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_header_stdc=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+  $EGREP "memchr" >/dev/null 2>&1; then
-+  :
-+else
-+  ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+  $EGREP "free" >/dev/null 2>&1; then
-+  :
-+else
-+  ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+  if test "$cross_compiling" = yes; then
-+  :
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ctype.h>
-+#include <stdlib.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+		   (('a' <= (c) && (c) <= 'i') \
-+		     || ('j' <= (c) && (c) <= 'r') \
-+		     || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+  int i;
-+  for (i = 0; i < 256; i++)
-+    if (XOR (islower (i), ISLOWER (i))
-+	|| toupper (i) != TOUPPER (i))
-+      return 2;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+  { (case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_try") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+  :
-+else
-+  echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+
-+fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+		  inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  eval "$as_ac_Header=yes"
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	eval "$as_ac_Header=no"
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+  cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+else
-+  # Is the header compilable?
-+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_header_compiler=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_header_compiler=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-+
-+# Is the header present?
-+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <$ac_header>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  ac_header_preproc=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  ac_header_preproc=no
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-+
-+# So?  What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+  yes:no: )
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+    ac_header_preproc=yes
-+    ;;
-+  no:yes:* )
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+    ( cat <<\_ASBOX
-+## -------------------------------------------- ##
-+## Report this to inkjet-list@linuxprinting.org ##
-+## -------------------------------------------- ##
-+_ASBOX
-+     ) | sed "s/^/$as_me: WARNING:     /" >&2
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  eval "$as_ac_Header=\$ac_header_preproc"
-+fi
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+  cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+if test -z "$CXX"; then
-+  if test -n "$CCC"; then
-+    CXX=$CCC
-+  else
-+    if test -n "$ac_tool_prefix"; then
-+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CXX"; then
-+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CXX=$ac_cv_prog_CXX
-+if test -n "$CXX"; then
-+  { echo "$as_me:$LINENO: result: $CXX" >&5
-+echo "${ECHO_T}$CXX" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CXX" && break
-+  done
-+fi
-+if test -z "$CXX"; then
-+  ac_ct_CXX=$CXX
-+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CXX"; then
-+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CXX="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-+if test -n "$ac_ct_CXX"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-+echo "${ECHO_T}$ac_ct_CXX" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CXX" && break
-+done
-+
-+  if test "x$ac_ct_CXX" = x; then
-+    CXX="g++"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CXX=$ac_ct_CXX
-+  fi
-+fi
-+
-+  fi
-+fi
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-+GXX=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CXXFLAGS=${CXXFLAGS+set}
-+ac_save_CXXFLAGS=$CXXFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cxx_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-+   ac_cxx_werror_flag=yes
-+   ac_cv_prog_cxx_g=no
-+   CXXFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cxx_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CXXFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+	 CXXFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cxx_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-+if test "$ac_test_CXXFLAGS" = set; then
-+  CXXFLAGS=$ac_save_CXXFLAGS
-+elif test $ac_cv_prog_cxx_g = yes; then
-+  if test "$GXX" = yes; then
-+    CXXFLAGS="-g -O2"
-+  else
-+    CXXFLAGS="-g"
-+  fi
-+else
-+  if test "$GXX" = yes; then
-+    CXXFLAGS="-O2"
-+  else
-+    CXXFLAGS=
-+  fi
-+fi
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+depcc="$CXX"  am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CXX_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CXX_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CXX_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-+
-+
-+
-+
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+    (test "X$CXX" != "Xg++"))) ; then
-+  ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-+if test -z "$CXXCPP"; then
-+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+      # Double quotes because CXXCPP needs to be expanded
-+    for CXXCPP in "$CXX -E" "/lib/cpp"
-+    do
-+      ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  break
-+fi
-+
-+    done
-+    ac_cv_prog_CXXCPP=$CXXCPP
-+
-+fi
-+  CXXCPP=$ac_cv_prog_CXXCPP
-+else
-+  ac_cv_prog_CXXCPP=$CXXCPP
-+fi
-+{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-+echo "${ECHO_T}$CXXCPP" >&6; }
-+ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+  # Use a header file that comes with gcc, so configuring glibc
-+  # with a fresh cross-compiler works.
-+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+  # <limits.h> exists even on freestanding compilers.
-+  # On the NeXT, cc -E runs the code through the compiler's parser,
-+  # not just through cpp. "Syntax error" is here to catch this case.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+		     Syntax error
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Broken: fails on valid input.
-+continue
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+  # OK, works on sane cases.  Now check whether nonexistent headers
-+  # can be detected and how.
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } >/dev/null && {
-+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       }; then
-+  # Broken: success on invalid input.
-+continue
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+  # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+  :
-+else
-+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+fi
-+
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$F77"; then
-+  ac_cv_prog_F77="$F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+F77=$ac_cv_prog_F77
-+if test -n "$F77"; then
-+  { echo "$as_me:$LINENO: result: $F77" >&5
-+echo "${ECHO_T}$F77" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$F77" && break
-+  done
-+fi
-+if test -z "$F77"; then
-+  ac_ct_F77=$F77
-+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_F77"; then
-+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_F77="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_F77=$ac_cv_prog_ac_ct_F77
-+if test -n "$ac_ct_F77"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-+echo "${ECHO_T}$ac_ct_F77" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_F77" && break
-+done
-+
-+  if test "x$ac_ct_F77" = x; then
-+    F77=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    F77=$ac_ct_F77
-+  fi
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+rm -f a.out
-+
-+# If we don't use `.F' as extension, the preprocessor is not run on the
-+# input file.  (Note that this only needs to work for GNU compilers.)
-+ac_save_ext=$ac_ext
-+ac_ext=F
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-+ac_ext=$ac_save_ext
-+ac_test_FFLAGS=${FFLAGS+set}
-+ac_save_FFLAGS=$FFLAGS
-+FFLAGS=
-+{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_f77_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  FFLAGS=-g
-+cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_f77_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_prog_f77_g=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-+if test "$ac_test_FFLAGS" = set; then
-+  FFLAGS=$ac_save_FFLAGS
-+elif test $ac_cv_prog_f77_g = yes; then
-+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+    FFLAGS="-g -O2"
-+  else
-+    FFLAGS="-g"
-+  fi
-+else
-+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+    FFLAGS="-O2"
-+  else
-+    FFLAGS=
-+  fi
-+fi
-+
-+G77=`test $ac_compiler_gnu = yes && echo yes`
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+
-+# find the maximum length of command line arguments
-+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+    i=0
-+  teststring="ABCD"
-+
-+  case $build_os in
-+  msdosdjgpp*)
-+    # On DJGPP, this test can blow up pretty badly due to problems in libc
-+    # (any single argument exceeding 2000 bytes causes a buffer overrun
-+    # during glob expansion).  Even if it were fixed, the result of this
-+    # check would be larger than it should be.
-+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-+    ;;
-+
-+  gnu*)
-+    # Under GNU Hurd, this test is not required because there is
-+    # no limit to the length of command line arguments.
-+    # Libtool will interpret -1 as no limit whatsoever
-+    lt_cv_sys_max_cmd_len=-1;
-+    ;;
-+
-+  cygwin* | mingw*)
-+    # On Win9x/ME, this test blows up -- it succeeds, but takes
-+    # about 5 minutes as the teststring grows exponentially.
-+    # Worse, since 9x/ME are not pre-emptively multitasking,
-+    # you end up with a "frozen" computer, even though with patience
-+    # the test eventually succeeds (with a max line length of 256k).
-+    # Instead, let's just punt: use the minimum linelength reported by
-+    # all of the supported platforms: 8192 (on NT/2K/XP).
-+    lt_cv_sys_max_cmd_len=8192;
-+    ;;
-+
-+  amigaos*)
-+    # On AmigaOS with pdksh, this test takes hours, literally.
-+    # So we just punt and use a minimum line length of 8192.
-+    lt_cv_sys_max_cmd_len=8192;
-+    ;;
-+
-+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+    # This has been around since 386BSD, at least.  Likely further.
-+    if test -x /sbin/sysctl; then
-+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+    elif test -x /usr/sbin/sysctl; then
-+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+    else
-+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-+    fi
-+    # And add a safety zone
-+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+    ;;
-+
-+  interix*)
-+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+    lt_cv_sys_max_cmd_len=196608
-+    ;;
-+
-+  osf*)
-+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+    # nice to cause kernel panics so lets avoid the loop below.
-+    # First set a reasonable default.
-+    lt_cv_sys_max_cmd_len=16384
-+    #
-+    if test -x /sbin/sysconfig; then
-+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+      esac
-+    fi
-+    ;;
-+  sco3.2v5*)
-+    lt_cv_sys_max_cmd_len=102400
-+    ;;
-+  sysv5* | sco5v6* | sysv4.2uw2*)
-+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+    if test -n "$kargmax"; then
-+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-+    else
-+      lt_cv_sys_max_cmd_len=32768
-+    fi
-+    ;;
-+  *)
-+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-+    if test -n "$lt_cv_sys_max_cmd_len"; then
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+    else
-+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-+	       = "XX$teststring") >/dev/null 2>&1 &&
-+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+	      lt_cv_sys_max_cmd_len=$new_result &&
-+	      test $i != 17 # 1/2 MB should be enough
-+      do
-+        i=`expr $i + 1`
-+        teststring=$teststring$teststring
-+      done
-+      teststring=
-+      # Add a significant safety factor because C++ compilers can tack on massive
-+      # amounts of additional arguments before passing them to the linker.
-+      # It appears as though 1/2 is a usable value.
-+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+    fi
-+    ;;
-+  esac
-+
-+fi
-+
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6; }
-+fi
-+
-+
-+
-+
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+  symcode='[BCDT]'
-+  ;;
-+cygwin* | mingw* | pw32*)
-+  symcode='[ABCDGISTW]'
-+  ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+  if test "$host_cpu" = ia64; then
-+    symcode='[ABCDEGRST]'
-+  fi
-+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+  ;;
-+linux* | k*bsd*-gnu)
-+  if test "$host_cpu" = ia64; then
-+    symcode='[ABCDGIRSTW]'
-+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-+  fi
-+  ;;
-+irix* | nonstopux*)
-+  symcode='[BCDEGRST]'
-+  ;;
-+osf*)
-+  symcode='[BCDEGQRST]'
-+  ;;
-+solaris*)
-+  symcode='[BDRT]'
-+  ;;
-+sco3.2v5*)
-+  symcode='[DT]'
-+  ;;
-+sysv4.2uw2*)
-+  symcode='[DT]'
-+  ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+  symcode='[ABDT]'
-+  ;;
-+sysv4)
-+  symcode='[DFNSTU]'
-+  ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+  ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+  symcode='[ABCDGIRSTW]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+  symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+  # Write the raw and C identifiers.
-+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+  # Check to see that the pipe works correctly.
-+  pipe_works=no
-+
-+  rm -f conftest*
-+  cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+    # Now try to grab the symbols.
-+    nlist=conftest.nm
-+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s "$nlist"; then
-+      # Try sorting and uniquifying the output.
-+      if sort "$nlist" | uniq > "$nlist"T; then
-+	mv -f "$nlist"T "$nlist"
-+      else
-+	rm -f "$nlist"T
-+      fi
-+
-+      # Make sure that we snagged all the symbols we need.
-+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+	  cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+	  # Now generate the symbol file.
-+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+	  cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+  const char *name;
-+  lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+	  cat <<\EOF >> conftest.$ac_ext
-+  {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+	  # Now try linking the two files.
-+	  mv conftest.$ac_objext conftstm.$ac_objext
-+	  lt_save_LIBS="$LIBS"
-+	  lt_save_CFLAGS="$CFLAGS"
-+	  LIBS="conftstm.$ac_objext"
-+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-+	    pipe_works=yes
-+	  fi
-+	  LIBS="$lt_save_LIBS"
-+	  CFLAGS="$lt_save_CFLAGS"
-+	else
-+	  echo "cannot find nm_test_func in $nlist" >&5
-+	fi
-+      else
-+	echo "cannot find nm_test_var in $nlist" >&5
-+      fi
-+    else
-+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-+    fi
-+  else
-+    echo "$progname: failed program was:" >&5
-+    cat conftest.$ac_ext >&5
-+  fi
-+  rm -f conftest* conftst*
-+
-+  # Do not use the global_symbol_pipe unless it works.
-+  if test "$pipe_works" = yes; then
-+    break
-+  else
-+    lt_cv_sys_global_symbol_pipe=
-+  fi
-+done
-+
-+fi
-+
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+  lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+  { echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6; }
-+fi
-+
-+{ echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-+if test "${lt_cv_objdir+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+  lt_cv_objdir=.libs
-+else
-+  # MS-DOS does not allow filenames that begin with a dot.
-+  lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-+echo "${ECHO_T}$lt_cv_objdir" >&6; }
-+objdir=$lt_cv_objdir
-+
-+
-+
-+
-+
-+case $host_os in
-+aix3*)
-+  # AIX sometimes has problems with the GCC collect2 program.  For some
-+  # reason, if we set the COLLECT_NAMES environment variable, the problems
-+  # vanish in a puff of smoke.
-+  if test "X${COLLECT_NAMES+set}" != Xset; then
-+    COLLECT_NAMES=
-+    export COLLECT_NAMES
-+  fi
-+  ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting.  It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_AR+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$AR"; then
-+  ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_AR="${ac_tool_prefix}ar"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+  { echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+  ac_ct_AR=$AR
-+  # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_AR"; then
-+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_AR="ar"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_AR" = x; then
-+    AR="false"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    AR=$ac_ct_AR
-+  fi
-+else
-+  AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$RANLIB"; then
-+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+  ac_ct_RANLIB=$RANLIB
-+  # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_RANLIB"; then
-+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_RANLIB="ranlib"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_RANLIB" = x; then
-+    RANLIB=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    RANLIB=$ac_ct_RANLIB
-+  fi
-+else
-+  RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$STRIP"; then
-+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+  { echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+  ac_ct_STRIP=$STRIP
-+  # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_STRIP"; then
-+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_STRIP="strip"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_STRIP" = x; then
-+    STRIP=":"
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    STRIP=$ac_ct_STRIP
-+  fi
-+else
-+  STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+  case $host_os in
-+  openbsd*)
-+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+    ;;
-+  *)
-+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+    ;;
-+  esac
-+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $MAGIC_CMD in
-+[\\/*] |  ?:[\\/]*)
-+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+  ;;
-+*)
-+  lt_save_MAGIC_CMD="$MAGIC_CMD"
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+  for ac_dir in $ac_dummy; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/${ac_tool_prefix}file; then
-+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+      if test -n "$file_magic_test_file"; then
-+	case $deplibs_check_method in
-+	"file_magic "*)
-+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+	    $EGREP "$file_magic_regex" > /dev/null; then
-+	    :
-+	  else
-+	    cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such.  This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem.  Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+	  fi ;;
-+	esac
-+      fi
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+  MAGIC_CMD="$lt_save_MAGIC_CMD"
-+  ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+  if test -n "$ac_tool_prefix"; then
-+    { echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $MAGIC_CMD in
-+[\\/*] |  ?:[\\/]*)
-+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+  ;;
-+*)
-+  lt_save_MAGIC_CMD="$MAGIC_CMD"
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+  for ac_dir in $ac_dummy; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/file; then
-+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-+      if test -n "$file_magic_test_file"; then
-+	case $deplibs_check_method in
-+	"file_magic "*)
-+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+	    $EGREP "$file_magic_regex" > /dev/null; then
-+	    :
-+	  else
-+	    cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such.  This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem.  Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+	  fi ;;
-+	esac
-+      fi
-+      break
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+  MAGIC_CMD="$lt_save_MAGIC_CMD"
-+  ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  else
-+    MAGIC_CMD=:
-+  fi
-+fi
-+
-+  fi
-+  ;;
-+esac
-+
-+enable_dlopen=no
-+enable_win32_dll=no
-+
-+# Check whether --enable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+  enableval=$enable_libtool_lock;
-+fi
-+
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+
-+# Check whether --with-pic was given.
-+if test "${with_pic+set}" = set; then
-+  withval=$with_pic; pic_mode="$withval"
-+else
-+  pic_mode=default
-+fi
-+
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+lt_save_CC="$CC"
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+objext=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}'
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+
-+lt_prog_compiler_no_builtin_flag=
-+
-+if test "$GCC" = yes; then
-+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_rtti_exceptions=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="-fno-rtti -fno-exceptions"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:6969: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:6973: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_rtti_exceptions=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-+else
-+    :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl=
-+lt_prog_compiler_pic=
-+lt_prog_compiler_static=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl='-Wl,'
-+    lt_prog_compiler_static='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static='-Bstatic'
-+      else
-+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic='-qnocommon'
-+         lt_prog_compiler_wl='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl='-Wl,'
-+	lt_prog_compiler_pic='-KPIC'
-+	lt_prog_compiler_static='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl='-Wl,'
-+	lt_prog_compiler_pic='-fpic'
-+	lt_prog_compiler_static='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic='-KPIC'
-+	  lt_prog_compiler_static='-Bstatic'
-+	  lt_prog_compiler_wl='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic='-KPIC'
-+	  lt_prog_compiler_static='-Bstatic'
-+	  lt_prog_compiler_wl=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl='-Qoption ld '
-+      lt_prog_compiler_pic='-PIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic='-Kconform_pic'
-+	lt_prog_compiler_static='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_pic='-KPIC'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl='-Wl,'
-+      lt_prog_compiler_can_build_shared=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic='-pic'
-+      lt_prog_compiler_static='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:7259: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:7263: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works" = xyes; then
-+    case $lt_prog_compiler_pic in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic=
-+     lt_prog_compiler_can_build_shared=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:7363: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:7367: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag=
-+  enable_shared_with_static_runtimes=no
-+  archive_cmds=
-+  archive_expsym_cmds=
-+  old_archive_From_new_cmds=
-+  old_archive_from_expsyms_cmds=
-+  export_dynamic_flag_spec=
-+  whole_archive_flag_spec=
-+  thread_safe_flag_spec=
-+  hardcode_libdir_flag_spec=
-+  hardcode_libdir_flag_spec_ld=
-+  hardcode_libdir_separator=
-+  hardcode_direct=no
-+  hardcode_minus_L=no
-+  hardcode_shlibpath_var=unsupported
-+  link_all_deplibs=unknown
-+  hardcode_automatic=no
-+  module_cmds=
-+  module_expsym_cmds=
-+  always_export_symbols=no
-+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      allow_undefined_flag=unsupported
-+      always_export_symbols=no
-+      enable_shared_with_static_runtimes=yes
-+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct=no
-+      hardcode_shlibpath_var=no
-+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec=
-+      export_dynamic_flag_spec=
-+      whole_archive_flag_spec=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag=unsupported
-+      always_export_symbols=yes
-+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds=''
-+      hardcode_direct=yes
-+      hardcode_libdir_separator=':'
-+      link_all_deplibs=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L=yes
-+  	  hardcode_libdir_flag_spec='-L$libdir'
-+  	  hardcode_libdir_separator=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag="-z nodefs"
-+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag=' ${wl}-bernotok'
-+	  allow_undefined_flag=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec='$convenience'
-+	  archive_cmds_need_lc=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec=' '
-+      allow_undefined_flag=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc=no
-+      hardcode_direct=no
-+      hardcode_automatic=yes
-+      hardcode_shlibpath_var=unsupported
-+      whole_archive_flag_spec=''
-+      link_all_deplibs=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct=yes
-+      hardcode_minus_L=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      hardcode_direct=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L=yes
-+      export_dynamic_flag_spec='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator=:
-+
-+	hardcode_direct=yes
-+	export_dynamic_flag_spec='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld='+b $libdir'
-+	  hardcode_direct=no
-+	  hardcode_shlibpath_var=no
-+	  ;;
-+	*)
-+	  hardcode_direct=yes
-+	  export_dynamic_flag_spec='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      link_all_deplibs=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_direct=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct=yes
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct=yes
-+	hardcode_shlibpath_var=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_minus_L=yes
-+      allow_undefined_flag=unsupported
-+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag=' -expect_unresolved \*'
-+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag=' -expect_unresolved \*'
-+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec='-R$libdir'
-+      hardcode_shlibpath_var=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_direct=yes
-+      hardcode_minus_L=yes
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds='$CC -r -o $output$reload_objs'
-+	  hardcode_direct=no
-+        ;;
-+	motorola)
-+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var=no
-+      export_dynamic_flag_spec='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag='${wl}-z,text'
-+      archive_cmds_need_lc=no
-+      hardcode_shlibpath_var=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag='${wl}-z,text'
-+      allow_undefined_flag='${wl}-z,nodefs'
-+      archive_cmds_need_lc=no
-+      hardcode_shlibpath_var=no
-+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator=':'
-+      link_all_deplibs=yes
-+      export_dynamic_flag_spec='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec='-L$libdir'
-+      hardcode_shlibpath_var=no
-+      ;;
-+
-+    *)
-+      ld_shlibs=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6; }
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl
-+	pic_flag=$lt_prog_compiler_pic
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag
-+        allow_undefined_flag=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc=no
-+        else
-+	  archive_cmds_need_lc=yes
-+        fi
-+        allow_undefined_flag=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+if test "$GCC" = yes; then
-+  case $host_os in
-+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-+    *) lt_awk_arg="/^libraries:/" ;;
-+  esac
-+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+  # Ok, now we have the path, separated by spaces, we can step through it
-+  # and add multilib dir if necessary.
-+  lt_tmp_lt_search_path_spec=
-+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-+  for lt_sys_path in $lt_search_path_spec; do
-+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-+    else
-+      test -d "$lt_sys_path" && \
-+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-+    fi
-+  done
-+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-+BEGIN {RS=" "; FS="/|\n";} {
-+  lt_foo="";
-+  lt_count=0;
-+  for (lt_i = NF; lt_i > 0; lt_i--) {
-+    if ($lt_i != "" && $lt_i != ".") {
-+      if ($lt_i == "..") {
-+        lt_count++;
-+      } else {
-+        if (lt_count == 0) {
-+          lt_foo="/" $lt_i lt_foo;
-+        } else {
-+          lt_count--;
-+        }
-+      }
-+    }
-+  }
-+  if (lt_foo != "") { lt_freq[lt_foo]++; }
-+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-+}'`
-+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+   test -n "$runpath_var" || \
-+   test "X$hardcode_automatic" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-+     test "$hardcode_minus_L" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6; }
-+
-+if test "$hardcode_action" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+striplib=
-+old_striplib=
-+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+  { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+  case $host_os in
-+   darwin*)
-+       if test -n "$STRIP" ; then
-+         striplib="$STRIP -x"
-+         old_striplib="$STRIP -S"
-+         { echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-+       else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+       ;;
-+   *)
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+    ;;
-+  esac
-+fi
-+
-+if test "x$enable_dlopen" != xyes; then
-+  enable_dlopen=unknown
-+  enable_dlopen_self=unknown
-+  enable_dlopen_self_static=unknown
-+else
-+  lt_cv_dlopen=no
-+  lt_cv_dlopen_libs=
-+
-+  case $host_os in
-+  beos*)
-+    lt_cv_dlopen="load_add_on"
-+    lt_cv_dlopen_libs=
-+    lt_cv_dlopen_self=yes
-+    ;;
-+
-+  mingw* | pw32*)
-+    lt_cv_dlopen="LoadLibrary"
-+    lt_cv_dlopen_libs=
-+   ;;
-+
-+  cygwin*)
-+    lt_cv_dlopen="dlopen"
-+    lt_cv_dlopen_libs=
-+   ;;
-+
-+  darwin*)
-+  # if libdl is installed we need to link against it
-+    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dl_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+
-+    lt_cv_dlopen="dyld"
-+    lt_cv_dlopen_libs=
-+    lt_cv_dlopen_self=yes
-+
-+fi
-+
-+   ;;
-+
-+  *)
-+    { echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-+#define shl_load innocuous_shl_load
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char shl_load (); below.
-+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+    <limits.h> exists even on freestanding compilers.  */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef shl_load
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined __stub_shl_load || defined __stub___shl_load
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return shl_load ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_func_shl_load=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_func_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-+if test $ac_cv_func_shl_load = yes; then
-+  lt_cv_dlopen="shl_load"
-+else
-+  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char shl_load ();
-+int
-+main ()
-+{
-+return shl_load ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dld_shl_load=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dld_shl_load=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-+#define dlopen innocuous_dlopen
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+    which can conflict with char dlopen (); below.
-+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+    <limits.h> exists even on freestanding compilers.  */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef dlopen
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+/* The GNU C library defines this for functions which it implements
-+    to always fail with ENOSYS.  Some functions are actually named
-+    something starting with __ and the normal name is an alias.  */
-+#if defined __stub_dlopen || defined __stub___dlopen
-+choke me
-+#endif
-+
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_func_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_func_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-+if test $ac_cv_func_dlopen = yes; then
-+  lt_cv_dlopen="dlopen"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dl_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dl_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lsvld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dlopen ();
-+int
-+main ()
-+{
-+return dlopen ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_svld_dlopen=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_svld_dlopen=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-+if test $ac_cv_lib_svld_dlopen = yes; then
-+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-+else
-+  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char dld_link ();
-+int
-+main ()
-+{
-+return dld_link ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_lib_dld_dld_link=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_cv_lib_dld_dld_link=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+    ;;
-+  esac
-+
-+  if test "x$lt_cv_dlopen" != xno; then
-+    enable_dlopen=yes
-+  else
-+    enable_dlopen=no
-+  fi
-+
-+  case $lt_cv_dlopen in
-+  dlopen)
-+    save_CPPFLAGS="$CPPFLAGS"
-+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+    save_LDFLAGS="$LDFLAGS"
-+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+    save_LIBS="$LIBS"
-+    LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  	  if test "$cross_compiling" = yes; then :
-+  lt_cv_dlopen_self=cross
-+else
-+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+  lt_status=$lt_dlunknown
-+  cat > conftest.$ac_ext <<EOF
-+#line 9712 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+#  define LT_DLGLOBAL		RTLD_GLOBAL
-+#else
-+#  ifdef DL_GLOBAL
-+#    define LT_DLGLOBAL		DL_GLOBAL
-+#  else
-+#    define LT_DLGLOBAL		0
-+#  endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+#  ifdef RTLD_LAZY
-+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-+#  else
-+#    ifdef DL_LAZY
-+#      define LT_DLLAZY_OR_NOW		DL_LAZY
-+#    else
-+#      ifdef RTLD_NOW
-+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-+#      else
-+#        ifdef DL_NOW
-+#          define LT_DLLAZY_OR_NOW	DL_NOW
-+#        else
-+#          define LT_DLLAZY_OR_NOW	0
-+#        endif
-+#      endif
-+#    endif
-+#  endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+  int status = $lt_dlunknown;
-+
-+  if (self)
-+    {
-+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+      /* dlclose (self); */
-+    }
-+  else
-+    puts (dlerror ());
-+
-+    exit (status);
-+}
-+EOF
-+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+    (./conftest; exit; ) >&5 2>/dev/null
-+    lt_status=$?
-+    case x$lt_status in
-+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-+    esac
-+  else :
-+    # compilation failed
-+    lt_cv_dlopen_self=no
-+  fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-+
-+    if test "x$lt_cv_dlopen_self" = xyes; then
-+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  	  if test "$cross_compiling" = yes; then :
-+  lt_cv_dlopen_self_static=cross
-+else
-+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+  lt_status=$lt_dlunknown
-+  cat > conftest.$ac_ext <<EOF
-+#line 9812 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+#  define LT_DLGLOBAL		RTLD_GLOBAL
-+#else
-+#  ifdef DL_GLOBAL
-+#    define LT_DLGLOBAL		DL_GLOBAL
-+#  else
-+#    define LT_DLGLOBAL		0
-+#  endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+   find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+#  ifdef RTLD_LAZY
-+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-+#  else
-+#    ifdef DL_LAZY
-+#      define LT_DLLAZY_OR_NOW		DL_LAZY
-+#    else
-+#      ifdef RTLD_NOW
-+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-+#      else
-+#        ifdef DL_NOW
-+#          define LT_DLLAZY_OR_NOW	DL_NOW
-+#        else
-+#          define LT_DLLAZY_OR_NOW	0
-+#        endif
-+#      endif
-+#    endif
-+#  endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+  int status = $lt_dlunknown;
-+
-+  if (self)
-+    {
-+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+      /* dlclose (self); */
-+    }
-+  else
-+    puts (dlerror ());
-+
-+    exit (status);
-+}
-+EOF
-+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+    (./conftest; exit; ) >&5 2>/dev/null
-+    lt_status=$?
-+    case x$lt_status in
-+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-+    esac
-+  else :
-+    # compilation failed
-+    lt_cv_dlopen_self_static=no
-+  fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
-+    fi
-+
-+    CPPFLAGS="$save_CPPFLAGS"
-+    LDFLAGS="$save_LDFLAGS"
-+    LIBS="$save_LIBS"
-+    ;;
-+  esac
-+
-+  case $lt_cv_dlopen_self in
-+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+  *) enable_dlopen_self=unknown ;;
-+  esac
-+
-+  case $lt_cv_dlopen_self_static in
-+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+  *) enable_dlopen_self_static=unknown ;;
-+  esac
-+fi
-+
-+
-+# Report which library types will actually be built
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+  test "$enable_shared" = yes && enable_static=no
-+  if test -n "$RANLIB"; then
-+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+    postinstall_cmds='$RANLIB $lib'
-+  fi
-+  ;;
-+
-+aix4* | aix5*)
-+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+    test "$enable_shared" = yes && enable_static=no
-+  fi
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler \
-+    CC \
-+    LD \
-+    lt_prog_compiler_wl \
-+    lt_prog_compiler_pic \
-+    lt_prog_compiler_static \
-+    lt_prog_compiler_no_builtin_flag \
-+    export_dynamic_flag_spec \
-+    thread_safe_flag_spec \
-+    whole_archive_flag_spec \
-+    enable_shared_with_static_runtimes \
-+    old_archive_cmds \
-+    old_archive_from_new_cmds \
-+    predep_objects \
-+    postdep_objects \
-+    predeps \
-+    postdeps \
-+    compiler_lib_search_path \
-+    archive_cmds \
-+    archive_expsym_cmds \
-+    postinstall_cmds \
-+    postuninstall_cmds \
-+    old_archive_from_expsyms_cmds \
-+    allow_undefined_flag \
-+    no_undefined_flag \
-+    export_symbols_cmds \
-+    hardcode_libdir_flag_spec \
-+    hardcode_libdir_flag_spec_ld \
-+    hardcode_libdir_separator \
-+    hardcode_automatic \
-+    module_cmds \
-+    module_expsym_cmds \
-+    lt_cv_prog_compiler_c_o \
-+    fix_srcfile_path \
-+    exclude_expsyms \
-+    include_expsyms; do
-+
-+    case $var in
-+    old_archive_cmds | \
-+    old_archive_from_new_cmds | \
-+    archive_cmds | \
-+    archive_expsym_cmds | \
-+    module_cmds | \
-+    module_expsym_cmds | \
-+    old_archive_from_expsyms_cmds | \
-+    export_symbols_cmds | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="${ofile}T"
-+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+  $rm -f "$cfgfile"
-+  { echo "$as_me:$LINENO: creating $ofile" >&5
-+echo "$as_me: creating $ofile" >&6;}
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds
-+archive_expsym_cmds=$lt_archive_expsym_cmds
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds
-+module_expsym_cmds=$lt_module_expsym_cmds
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms
-+
-+# ### END LIBTOOL CONFIG
-+
-+__EOF__
-+
-+
-+  case $host_os in
-+  aix3*)
-+    cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program.  For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+  COLLECT_NAMES=
-+  export COLLECT_NAMES
-+fi
-+EOF
-+    ;;
-+  esac
-+
-+  # We use sed instead of cat because bash on DJGPP gets confused if
-+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-+  # text mode, it properly converts lines to CR/LF.  This bash problem
-+  # is reportedly fixed, but why not run on old versions too?
-+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+  mv -f "$cfgfile" "$ofile" || \
-+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+  chmod +x "$ofile"
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+
-+# Check whether --with-tags was given.
-+if test "${with_tags+set}" = set; then
-+  withval=$with_tags; tagnames="$withval"
-+fi
-+
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+  if test ! -f "${ofile}"; then
-+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-+  fi
-+
-+  if test -z "$LTCC"; then
-+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+    if test -z "$LTCC"; then
-+      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-+    else
-+      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-+    fi
-+  fi
-+  if test -z "$LTCFLAGS"; then
-+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+  fi
-+
-+  # Extract list of available tagged configurations in $ofile.
-+  # Note that this assumes the entire list is on one line.
-+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+  for tagname in $tagnames; do
-+    IFS="$lt_save_ifs"
-+    # Check whether tagname contains only valid characters
-+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-+    "") ;;
-+    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-+echo "$as_me: error: invalid tag name: $tagname" >&2;}
-+   { (exit 1); exit 1; }; }
-+	;;
-+    esac
-+
-+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+    then
-+      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-+   { (exit 1); exit 1; }; }
-+    fi
-+
-+    # Update the list of available tags.
-+    if test -n "$tagname"; then
-+      echo appending configuration tag \"$tagname\" to $ofile
-+
-+      case $tagname in
-+      CXX)
-+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+	    (test "X$CXX" != "Xg++"))) ; then
-+	  ac_ext=cpp
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+
-+archive_cmds_need_lc_CXX=no
-+allow_undefined_flag_CXX=
-+always_export_symbols_CXX=no
-+archive_expsym_cmds_CXX=
-+export_dynamic_flag_spec_CXX=
-+hardcode_direct_CXX=no
-+hardcode_libdir_flag_spec_CXX=
-+hardcode_libdir_flag_spec_ld_CXX=
-+hardcode_libdir_separator_CXX=
-+hardcode_minus_L_CXX=no
-+hardcode_shlibpath_var_CXX=unsupported
-+hardcode_automatic_CXX=no
-+module_cmds_CXX=
-+module_expsym_cmds_CXX=
-+link_all_deplibs_CXX=unknown
-+old_archive_cmds_CXX=$old_archive_cmds
-+no_undefined_flag_CXX=
-+whole_archive_flag_spec_CXX=
-+enable_shared_with_static_runtimes_CXX=no
-+
-+# Dependencies to place before and after the object being linked:
-+predep_objects_CXX=
-+postdep_objects_CXX=
-+predeps_CXX=
-+postdeps_CXX=
-+compiler_lib_search_path_CXX=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+objext_CXX=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+  $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+  lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+  $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+compiler_CXX=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-+else
-+  lt_prog_compiler_no_builtin_flag_CXX=
-+fi
-+
-+if test "$GXX" = yes; then
-+  # Set up default GNU C++ configuration
-+
-+
-+# Check whether --with-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-+else
-+  with_gnu_ld=no
-+fi
-+
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+  # Check if gcc -print-prog-name=ld gives a path.
-+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-+  case $host in
-+  *-*-mingw*)
-+    # gcc leaves a trailing carriage return which upsets mingw
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+  *)
-+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+  esac
-+  case $ac_prog in
-+    # Accept absolute paths.
-+    [\\/]* | ?:[\\/]*)
-+      re_direlt='/[^/][^/]*/\.\./'
-+      # Canonicalize the pathname of ld
-+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+      done
-+      test -z "$LD" && LD="$ac_prog"
-+      ;;
-+  "")
-+    # If it fails, then pretend we aren't using GCC.
-+    ac_prog=ld
-+    ;;
-+  *)
-+    # If it is relative, then search for the first ld in PATH.
-+    with_gnu_ld=unknown
-+    ;;
-+  esac
-+elif test "$with_gnu_ld" = yes; then
-+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-+else
-+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$LD"; then
-+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+  for ac_dir in $PATH; do
-+    IFS="$lt_save_ifs"
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+      lt_cv_path_LD="$ac_dir/$ac_prog"
-+      # Check to see if the program is GNU ld.  I'd rather use --version,
-+      # but apparently some variants of GNU ld only accept -v.
-+      # Break only if it was the GNU/non-GNU ld that we prefer.
-+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+      *GNU* | *'with BFD'*)
-+	test "$with_gnu_ld" != no && break
-+	;;
-+      *)
-+	test "$with_gnu_ld" != yes && break
-+	;;
-+      esac
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+else
-+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+  { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+   { (exit 1); exit 1; }; }
-+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+  lt_cv_prog_gnu_ld=yes
-+  ;;
-+*)
-+  lt_cv_prog_gnu_ld=no
-+  ;;
-+esac
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+
-+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+  # archiving commands below assume that GNU ld is being used.
-+  if test "$with_gnu_ld" = yes; then
-+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+    #     investigate it a little bit more. (MM)
-+    wlarc='${wl}'
-+
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+	grep 'no-whole-archive' > /dev/null; then
-+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+    else
-+      whole_archive_flag_spec_CXX=
-+    fi
-+  else
-+    with_gnu_ld=no
-+    wlarc=
-+
-+    # A generic and very simple default shared library creation
-+    # command for GNU C++ for the case where it uses the native
-+    # linker, instead of GNU ld.  If possible, this setting should
-+    # overridden to take advantage of the native linker features on
-+    # the platform it is being used on.
-+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+  fi
-+
-+  # Commands to make compiler produce verbose output that lists
-+  # what "hidden" libraries, object files and flags are used when
-+  # linking a shared library.
-+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+  GXX=no
-+  with_gnu_ld=no
-+  wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+ld_shlibs_CXX=yes
-+case $host_os in
-+  aix3*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  aix4* | aix5*)
-+    if test "$host_cpu" = ia64; then
-+      # On IA64, the linker does run time linking by default, so we don't
-+      # have to do anything special.
-+      aix_use_runtimelinking=no
-+      exp_sym_flag='-Bexport'
-+      no_entry_flag=""
-+    else
-+      aix_use_runtimelinking=no
-+
-+      # Test if we are trying to use run time linking or normal
-+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+      # need to do runtime linking.
-+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	for ld_flag in $LDFLAGS; do
-+	  case $ld_flag in
-+	  *-brtl*)
-+	    aix_use_runtimelinking=yes
-+	    break
-+	    ;;
-+	  esac
-+	done
-+	;;
-+      esac
-+
-+      exp_sym_flag='-bexport'
-+      no_entry_flag='-bnoentry'
-+    fi
-+
-+    # When large executables or shared objects are built, AIX ld can
-+    # have problems creating the table of contents.  If linking a library
-+    # or program results in "error TOC overflow" add -mminimal-toc to
-+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+    archive_cmds_CXX=''
-+    hardcode_direct_CXX=yes
-+    hardcode_libdir_separator_CXX=':'
-+    link_all_deplibs_CXX=yes
-+
-+    if test "$GXX" = yes; then
-+      case $host_os in aix4.[012]|aix4.[012].*)
-+      # We only want to do this on AIX 4.2 and lower, the check
-+      # below for broken collect2 doesn't work under 4.3+
-+	collect2name=`${CC} -print-prog-name=collect2`
-+	if test -f "$collect2name" && \
-+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	then
-+	  # We have reworked collect2
-+	  :
-+	else
-+	  # We have old collect2
-+	  hardcode_direct_CXX=unsupported
-+	  # It fails to find uninstalled libraries when the uninstalled
-+	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+	  # to unsupported forces relinking
-+	  hardcode_minus_L_CXX=yes
-+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-+	  hardcode_libdir_separator_CXX=
-+	fi
-+	;;
-+      esac
-+      shared_flag='-shared'
-+      if test "$aix_use_runtimelinking" = yes; then
-+	shared_flag="$shared_flag "'${wl}-G'
-+      fi
-+    else
-+      # not using gcc
-+      if test "$host_cpu" = ia64; then
-+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+	# chokes on -Wl,-G. The following line is correct:
-+	shared_flag='-G'
-+      else
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag='${wl}-G'
-+	else
-+	  shared_flag='${wl}-bM:SRE'
-+	fi
-+      fi
-+    fi
-+
-+    # It seems that -bexpall does not export symbols beginning with
-+    # underscore (_), so it is better to generate a list of symbols to export.
-+    always_export_symbols_CXX=yes
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # Warning - without using the other runtime loading flags (-brtl),
-+      # -berok will link without error, but may produce a broken library.
-+      allow_undefined_flag_CXX='-berok'
-+      # Determine the default libpath from the value encoded in an empty executable.
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+     else
-+      if test "$host_cpu" = ia64; then
-+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-+	allow_undefined_flag_CXX="-z nodefs"
-+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+      else
-+	# Determine the default libpath from the value encoded in an empty executable.
-+	cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_cxx_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	# Warning - without using the other run time loading flags,
-+	# -berok will link without error, but may produce a broken library.
-+	no_undefined_flag_CXX=' ${wl}-bernotok'
-+	allow_undefined_flag_CXX=' ${wl}-berok'
-+	# Exported symbols can be pulled into shared objects from archives
-+	whole_archive_flag_spec_CXX='$convenience'
-+	archive_cmds_need_lc_CXX=yes
-+	# This is similar to how AIX traditionally builds its shared libraries.
-+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+      fi
-+    fi
-+    ;;
-+
-+  beos*)
-+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+      allow_undefined_flag_CXX=unsupported
-+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+      # support --undefined.  This deserves some investigation.  FIXME
-+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+    ;;
-+
-+  chorus*)
-+    case $cc_basename in
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+
-+  cygwin* | mingw* | pw32*)
-+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+    # as there is no search path for DLLs.
-+    hardcode_libdir_flag_spec_CXX='-L$libdir'
-+    allow_undefined_flag_CXX=unsupported
-+    always_export_symbols_CXX=no
-+    enable_shared_with_static_runtimes_CXX=yes
-+
-+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      # If the export-symbols file already is a .def file (1st line
-+      # is EXPORTS), use it as is; otherwise, prepend...
-+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	cp $export_symbols $output_objdir/$soname.def;
-+      else
-+	echo EXPORTS > $output_objdir/$soname.def;
-+	cat $export_symbols >> $output_objdir/$soname.def;
-+      fi~
-+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+  ;;
-+      darwin* | rhapsody*)
-+        case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+        esac
-+      archive_cmds_need_lc_CXX=no
-+      hardcode_direct_CXX=no
-+      hardcode_automatic_CXX=yes
-+      hardcode_shlibpath_var_CXX=unsupported
-+      whole_archive_flag_spec_CXX=''
-+      link_all_deplibs_CXX=yes
-+
-+    if test "$GXX" = yes ; then
-+      lt_int_apple_cc_single_mod=no
-+      output_verbose_link_cmd='echo'
-+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-+       lt_int_apple_cc_single_mod=yes
-+      fi
-+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      else
-+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+        fi
-+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          else
-+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          fi
-+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_CXX=no
-+          ;;
-+      esac
-+      fi
-+        ;;
-+
-+  dgux*)
-+    case $cc_basename in
-+      ec++*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      ghcx*)
-+	# Green Hills C++ Compiler
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  freebsd[12]*)
-+    # C++ shared libraries reported to be fairly broken before switch to ELF
-+    ld_shlibs_CXX=no
-+    ;;
-+  freebsd-elf*)
-+    archive_cmds_need_lc_CXX=no
-+    ;;
-+  freebsd* | dragonfly*)
-+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+    # conventions
-+    ld_shlibs_CXX=yes
-+    ;;
-+  gnu*)
-+    ;;
-+  hpux9*)
-+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+    hardcode_libdir_separator_CXX=:
-+    export_dynamic_flag_spec_CXX='${wl}-E'
-+    hardcode_direct_CXX=yes
-+    hardcode_minus_L_CXX=yes # Not in the search PATH,
-+				# but as the default
-+				# location of the library.
-+
-+    case $cc_basename in
-+    CC*)
-+      # FIXME: insert proper C++ library support
-+      ld_shlibs_CXX=no
-+      ;;
-+    aCC*)
-+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      # Commands to make compiler produce verbose output that lists
-+      # what "hidden" libraries, object files and flags are used when
-+      # linking a shared library.
-+      #
-+      # There doesn't appear to be a way to prevent this compiler from
-+      # explicitly linking system object files so we need to strip them
-+      # from the output so that they don't get included in the library
-+      # dependencies.
-+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+      ;;
-+    *)
-+      if test "$GXX" = yes; then
-+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+        # FIXME: insert proper C++ library support
-+        ld_shlibs_CXX=no
-+      fi
-+      ;;
-+    esac
-+    ;;
-+  hpux10*|hpux11*)
-+    if test $with_gnu_ld = no; then
-+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_CXX=:
-+
-+      case $host_cpu in
-+      hppa*64*|ia64*) ;;
-+      *)
-+	export_dynamic_flag_spec_CXX='${wl}-E'
-+        ;;
-+      esac
-+    fi
-+    case $host_cpu in
-+    hppa*64*|ia64*)
-+      hardcode_direct_CXX=no
-+      hardcode_shlibpath_var_CXX=no
-+      ;;
-+    *)
-+      hardcode_direct_CXX=yes
-+      hardcode_minus_L_CXX=yes # Not in the search PATH,
-+					      # but as the default
-+					      # location of the library.
-+      ;;
-+    esac
-+
-+    case $cc_basename in
-+      CC*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      aCC*)
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  ;;
-+	esac
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes; then
-+	  if test $with_gnu_ld = no; then
-+	    case $host_cpu in
-+	    hppa*64*)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    ia64*)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    *)
-+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	      ;;
-+	    esac
-+	  fi
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  interix[3-9]*)
-+    hardcode_direct_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+    export_dynamic_flag_spec_CXX='${wl}-E'
-+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+    # Instead, shared libraries are loaded at an image base (0x10000000 by
-+    # default) and relocated if they conflict, which is a slow very memory
-+    # consuming and fragmenting process.  To avoid this, we pick a random,
-+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+    ;;
-+  irix5* | irix6*)
-+    case $cc_basename in
-+      CC*)
-+	# SGI C++
-+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-+	# necessary to make sure instantiated templates are included
-+	# in the archive.
-+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+	;;
-+      *)
-+	if test "$GXX" = yes; then
-+	  if test "$with_gnu_ld" = no; then
-+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	  else
-+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+	  fi
-+	fi
-+	link_all_deplibs_CXX=yes
-+	;;
-+    esac
-+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+    hardcode_libdir_separator_CXX=:
-+    ;;
-+  linux* | k*bsd*-gnu)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+	;;
-+      icpc*)
-+	# Intel C++
-+	with_gnu_ld=yes
-+	# version 8.0 and above of icpc choke on multiply defined symbols
-+	# if we add $predep_objects and $postdep_objects, however 7.1 and
-+	# earlier do not add the objects themselves.
-+	case `$CC -V 2>&1` in
-+	*"Version 7."*)
-+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+	  ;;
-+	*)  # Version 8.0 or newer
-+	  tmp_idyn=
-+	  case $host_cpu in
-+	    ia64*) tmp_idyn=' -i_dynamic';;
-+	  esac
-+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+	  ;;
-+	esac
-+	archive_cmds_need_lc_CXX=no
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+	;;
-+      pgCC*)
-+        # Portland Group C++ compiler
-+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+        ;;
-+      cxx*)
-+	# Compaq C++
-+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+	runpath_var=LD_RUN_PATH
-+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C++ 5.9
-+	  no_undefined_flag_CXX=' -zdefs'
-+	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
-+	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+
-+	  # Not sure whether something based on
-+	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-+	  # would be better.
-+	  output_verbose_link_cmd='echo'
-+
-+	  # Archives containing C++ object files must be created using
-+	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-+	  # necessary to make sure instantiated templates are included
-+	  # in the archive.
-+	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+	  ;;
-+	esac
-+	;;
-+    esac
-+    ;;
-+  lynxos*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  m88k*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  mvs*)
-+    case $cc_basename in
-+      cxx*)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  netbsd*)
-+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+      wlarc=
-+      hardcode_libdir_flag_spec_CXX='-R$libdir'
-+      hardcode_direct_CXX=yes
-+      hardcode_shlibpath_var_CXX=no
-+    fi
-+    # Workaround some broken pre-1.5 toolchains
-+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+    ;;
-+  openbsd2*)
-+    # C++ shared libraries are fairly broken
-+    ld_shlibs_CXX=no
-+    ;;
-+  openbsd*)
-+    if test -f /usr/libexec/ld.so; then
-+      hardcode_direct_CXX=yes
-+      hardcode_shlibpath_var_CXX=no
-+      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+	export_dynamic_flag_spec_CXX='${wl}-E'
-+	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      fi
-+      output_verbose_link_cmd='echo'
-+    else
-+      ld_shlibs_CXX=no
-+    fi
-+    ;;
-+  osf3*)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+	;;
-+      RCC*)
-+	# Rational C++ 2.4.1
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      cxx*)
-+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	  hardcode_libdir_separator_CXX=:
-+
-+	  # Commands to make compiler produce verbose output that lists
-+	  # what "hidden" libraries, object files and flags are used when
-+	  # linking a shared library.
-+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  osf4* | osf5*)
-+    case $cc_basename in
-+      KCC*)
-+	# Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+	# KCC will only create a shared library if the output file
-+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-+	# to its proper name (with version) after linking.
-+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Archives containing C++ object files must be created using
-+	# the KAI C++ compiler.
-+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-+	;;
-+      RCC*)
-+	# Rational C++ 2.4.1
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      cxx*)
-+	allow_undefined_flag_CXX=' -expect_unresolved \*'
-+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+	  echo "-hidden">> $lib.exp~
-+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+	  $rm $lib.exp'
-+
-+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+	hardcode_libdir_separator_CXX=:
-+
-+	# Commands to make compiler produce verbose output that lists
-+	# what "hidden" libraries, object files and flags are used when
-+	# linking a shared library.
-+	#
-+	# There doesn't appear to be a way to prevent this compiler from
-+	# explicitly linking system object files so we need to strip them
-+	# from the output so that they don't get included in the library
-+	# dependencies.
-+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+	;;
-+      *)
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+	  hardcode_libdir_separator_CXX=:
-+
-+	  # Commands to make compiler produce verbose output that lists
-+	  # what "hidden" libraries, object files and flags are used when
-+	  # linking a shared library.
-+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+	else
-+	  # FIXME: insert proper C++ library support
-+	  ld_shlibs_CXX=no
-+	fi
-+	;;
-+    esac
-+    ;;
-+  psos*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  sunos4*)
-+    case $cc_basename in
-+      CC*)
-+	# Sun C++ 4.x
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      lcc*)
-+	# Lucid
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  solaris*)
-+    case $cc_basename in
-+      CC*)
-+	# Sun C++ 4.2, 5.x and Centerline C++
-+        archive_cmds_need_lc_CXX=yes
-+	no_undefined_flag_CXX=' -zdefs'
-+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	hardcode_libdir_flag_spec_CXX='-R$libdir'
-+	hardcode_shlibpath_var_CXX=no
-+	case $host_os in
-+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-+	  *)
-+	    # The compiler driver will combine and reorder linker options,
-+	    # but understands `-z linker_flag'.
-+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-+	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-+	    ;;
-+	esac
-+	link_all_deplibs_CXX=yes
-+
-+	output_verbose_link_cmd='echo'
-+
-+	# Archives containing C++ object files must be created using
-+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-+	# necessary to make sure instantiated templates are included
-+	# in the archive.
-+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+	;;
-+      gcx*)
-+	# Green Hills C++ Compiler
-+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+	# The C++ compiler must be used to create the archive.
-+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+	;;
-+      *)
-+	# GNU C++ compiler with Solaris linker
-+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	    # Commands to make compiler produce verbose output that lists
-+	    # what "hidden" libraries, object files and flags are used when
-+	    # linking a shared library.
-+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+	  else
-+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+	    # platform.
-+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+	    # Commands to make compiler produce verbose output that lists
-+	    # what "hidden" libraries, object files and flags are used when
-+	    # linking a shared library.
-+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+	  fi
-+
-+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-+	  case $host_os in
-+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-+	  *)
-+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	    ;;
-+	  esac
-+	fi
-+	;;
-+    esac
-+    ;;
-+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+    no_undefined_flag_CXX='${wl}-z,text'
-+    archive_cmds_need_lc_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    runpath_var='LD_RUN_PATH'
-+
-+    case $cc_basename in
-+      CC*)
-+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+      *)
-+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+    esac
-+    ;;
-+  sysv5* | sco3.2v5* | sco5v6*)
-+    # Note: We can NOT use -z defs as we might desire, because we do not
-+    # link with -lc, and that would cause any symbols used from libc to
-+    # always be unresolved, which means just about no library would
-+    # ever link correctly.  If we're not using GNU ld we use -z text
-+    # though, which does catch some bad symbols but isn't as heavy-handed
-+    # as -z defs.
-+    # For security reasons, it is highly recommended that you always
-+    # use absolute paths for naming shared libraries, and exclude the
-+    # DT_RUNPATH tag from executables and libraries.  But doing so
-+    # requires that you compile everything twice, which is a pain.
-+    # So that behaviour is only enabled if SCOABSPATH is set to a
-+    # non-empty value in the environment.  Most likely only useful for
-+    # creating official distributions of packages.
-+    # This is a hack until libtool officially supports absolute path
-+    # names for shared libraries.
-+    no_undefined_flag_CXX='${wl}-z,text'
-+    allow_undefined_flag_CXX='${wl}-z,nodefs'
-+    archive_cmds_need_lc_CXX=no
-+    hardcode_shlibpath_var_CXX=no
-+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+    hardcode_libdir_separator_CXX=':'
-+    link_all_deplibs_CXX=yes
-+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-+    runpath_var='LD_RUN_PATH'
-+
-+    case $cc_basename in
-+      CC*)
-+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+      *)
-+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	;;
-+    esac
-+    ;;
-+  tandem*)
-+    case $cc_basename in
-+      NCC*)
-+	# NonStop-UX NCC 3.20
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+      *)
-+	# FIXME: insert proper C++ library support
-+	ld_shlibs_CXX=no
-+	;;
-+    esac
-+    ;;
-+  vxworks*)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+  *)
-+    # FIXME: insert proper C++ library support
-+    ld_shlibs_CXX=no
-+    ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+GCC_CXX="$GXX"
-+LD_CXX="$LD"
-+
-+
-+cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+  Foo (void) { a = 0; }
-+private:
-+  int a;
-+};
-+EOF
-+
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; then
-+  # Parse the compiler output and extract the necessary
-+  # objects, libraries and library flags.
-+
-+  # Sentinel used to keep track of whether or not we are before
-+  # the conftest object file.
-+  pre_test_object_deps_done=no
-+
-+  # The `*' in the case matches for architectures that use `case' in
-+  # $output_verbose_cmd can trigger glob expansion during the loop
-+  # eval without this substitution.
-+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+  for p in `eval $output_verbose_link_cmd`; do
-+    case $p in
-+
-+    -L* | -R* | -l*)
-+       # Some compilers place space between "-{L,R}" and the path.
-+       # Remove the space.
-+       if test $p = "-L" \
-+	  || test $p = "-R"; then
-+	 prev=$p
-+	 continue
-+       else
-+	 prev=
-+       fi
-+
-+       if test "$pre_test_object_deps_done" = no; then
-+	 case $p in
-+	 -L* | -R*)
-+	   # Internal compiler library paths should come after those
-+	   # provided the user.  The postdeps already come after the
-+	   # user supplied libs so there is no need to process them.
-+	   if test -z "$compiler_lib_search_path_CXX"; then
-+	     compiler_lib_search_path_CXX="${prev}${p}"
-+	   else
-+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-+	   fi
-+	   ;;
-+	 # The "-l" case would never come before the object being
-+	 # linked, so don't bother handling this case.
-+	 esac
-+       else
-+	 if test -z "$postdeps_CXX"; then
-+	   postdeps_CXX="${prev}${p}"
-+	 else
-+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-+	 fi
-+       fi
-+       ;;
-+
-+    *.$objext)
-+       # This assumes that the test object file only shows up
-+       # once in the compiler output.
-+       if test "$p" = "conftest.$objext"; then
-+	 pre_test_object_deps_done=yes
-+	 continue
-+       fi
-+
-+       if test "$pre_test_object_deps_done" = no; then
-+	 if test -z "$predep_objects_CXX"; then
-+	   predep_objects_CXX="$p"
-+	 else
-+	   predep_objects_CXX="$predep_objects_CXX $p"
-+	 fi
-+       else
-+	 if test -z "$postdep_objects_CXX"; then
-+	   postdep_objects_CXX="$p"
-+	 else
-+	   postdep_objects_CXX="$postdep_objects_CXX $p"
-+	 fi
-+       fi
-+       ;;
-+
-+    *) ;; # Ignore the rest.
-+
-+    esac
-+  done
-+
-+  # Clean up.
-+  rm -f a.out a.exe
-+else
-+  echo "libtool.m4: error: problem compiling CXX test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+# PORTME: override above test on systems where it is broken
-+case $host_os in
-+interix[3-9]*)
-+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+  # hack all around it, let's just trust "g++" to DTRT.
-+  predep_objects_CXX=
-+  postdep_objects_CXX=
-+  postdeps_CXX=
-+  ;;
-+
-+linux*)
-+  case `$CC -V 2>&1 | sed 5q` in
-+  *Sun\ C*)
-+    # Sun C++ 5.9
-+    #
-+    # The more standards-conforming stlport4 library is
-+    # incompatible with the Cstd library. Avoid specifying
-+    # it if it's in CXXFLAGS. Ignore libCrun as
-+    # -library=stlport4 depends on it.
-+    case " $CXX $CXXFLAGS " in
-+    *" -library=stlport4 "*)
-+      solaris_use_stlport4=yes
-+      ;;
-+    esac
-+    if test "$solaris_use_stlport4" != yes; then
-+      postdeps_CXX='-library=Cstd -library=Crun'
-+    fi
-+    ;;
-+  esac
-+  ;;
-+
-+solaris*)
-+  case $cc_basename in
-+  CC*)
-+    # The more standards-conforming stlport4 library is
-+    # incompatible with the Cstd library. Avoid specifying
-+    # it if it's in CXXFLAGS. Ignore libCrun as
-+    # -library=stlport4 depends on it.
-+    case " $CXX $CXXFLAGS " in
-+    *" -library=stlport4 "*)
-+      solaris_use_stlport4=yes
-+      ;;
-+    esac
-+
-+    # Adding this requires a known-good setup of shared libraries for
-+    # Sun compiler versions before 5.6, else PIC objects from an old
-+    # archive will be linked into the output, leading to subtle bugs.
-+    if test "$solaris_use_stlport4" != yes; then
-+      postdeps_CXX='-library=Cstd -library=Crun'
-+    fi
-+    ;;
-+  esac
-+  ;;
-+esac
-+
-+
-+case " $postdeps_CXX " in
-+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-+esac
-+
-+lt_prog_compiler_wl_CXX=
-+lt_prog_compiler_pic_CXX=
-+lt_prog_compiler_static_CXX=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  # C++ specific cases for pic, static, wl, etc.
-+  if test "$GXX" = yes; then
-+    lt_prog_compiler_wl_CXX='-Wl,'
-+    lt_prog_compiler_static_CXX='-static'
-+
-+    case $host_os in
-+    aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_CXX='-Bstatic'
-+      fi
-+      ;;
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+    mingw* | cygwin* | os2* | pw32*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+      ;;
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_CXX='-fno-common'
-+      ;;
-+    *djgpp*)
-+      # DJGPP does not support shared libraries at all
-+      lt_prog_compiler_pic_CXX=
-+      ;;
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_CXX=-Kconform_pic
-+      fi
-+      ;;
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	;;
-+      *)
-+	lt_prog_compiler_pic_CXX='-fPIC'
-+	;;
-+      esac
-+      ;;
-+    *)
-+      lt_prog_compiler_pic_CXX='-fPIC'
-+      ;;
-+    esac
-+  else
-+    case $host_os in
-+      aix4* | aix5*)
-+	# All AIX code is PIC.
-+	if test "$host_cpu" = ia64; then
-+	  # AIX 5 now supports IA64 processor
-+	  lt_prog_compiler_static_CXX='-Bstatic'
-+	else
-+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-+	fi
-+	;;
-+      chorus*)
-+	case $cc_basename in
-+	cxch68*)
-+	  # Green Hills C++ Compiler
-+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+	  ;;
-+	esac
-+	;;
-+       darwin*)
-+         # PIC is the default on this platform
-+         # Common symbols not allowed in MH_DYLIB files
-+         case $cc_basename in
-+           xlc*)
-+           lt_prog_compiler_pic_CXX='-qnocommon'
-+           lt_prog_compiler_wl_CXX='-Wl,'
-+           ;;
-+         esac
-+       ;;
-+      dgux*)
-+	case $cc_basename in
-+	  ec++*)
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    ;;
-+	  ghcx*)
-+	    # Green Hills C++ Compiler
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      freebsd* | dragonfly*)
-+	# FreeBSD uses GNU C++
-+	;;
-+      hpux9* | hpux10* | hpux11*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+	    if test "$host_cpu" != ia64; then
-+	      lt_prog_compiler_pic_CXX='+Z'
-+	    fi
-+	    ;;
-+	  aCC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+	    case $host_cpu in
-+	    hppa*64*|ia64*)
-+	      # +Z the default
-+	      ;;
-+	    *)
-+	      lt_prog_compiler_pic_CXX='+Z'
-+	      ;;
-+	    esac
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      interix*)
-+	# This is c89, which is MS Visual C++ (no shared libs)
-+	# Anyone wants to do a port?
-+	;;
-+      irix5* | irix6* | nonstopux*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    # CC pic flag -KPIC is the default.
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      linux* | k*bsd*-gnu)
-+	case $cc_basename in
-+	  KCC*)
-+	    # KAI C++ Compiler
-+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-+	    lt_prog_compiler_pic_CXX='-fPIC'
-+	    ;;
-+	  icpc* | ecpc*)
-+	    # Intel C++
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-static'
-+	    ;;
-+	  pgCC*)
-+	    # Portland Group C++ compiler.
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-fpic'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	  cxx*)
-+	    # Compaq C++
-+	    # Make sure the PIC flag is empty.  It appears that all Alpha
-+	    # Linux and Compaq Tru64 Unix objects are PIC.
-+	    lt_prog_compiler_pic_CXX=
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    ;;
-+	  *)
-+	    case `$CC -V 2>&1 | sed 5q` in
-+	    *Sun\ C*)
-+	      # Sun C++ 5.9
-+	      lt_prog_compiler_pic_CXX='-KPIC'
-+	      lt_prog_compiler_static_CXX='-Bstatic'
-+	      lt_prog_compiler_wl_CXX='-Qoption ld '
-+	      ;;
-+	    esac
-+	    ;;
-+	esac
-+	;;
-+      lynxos*)
-+	;;
-+      m88k*)
-+	;;
-+      mvs*)
-+	case $cc_basename in
-+	  cxx*)
-+	    lt_prog_compiler_pic_CXX='-W c,exportall'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      netbsd*)
-+	;;
-+      osf3* | osf4* | osf5*)
-+	case $cc_basename in
-+	  KCC*)
-+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-+	    ;;
-+	  RCC*)
-+	    # Rational C++ 2.4.1
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  cxx*)
-+	    # Digital/Compaq C++
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    # Make sure the PIC flag is empty.  It appears that all Alpha
-+	    # Linux and Compaq Tru64 Unix objects are PIC.
-+	    lt_prog_compiler_pic_CXX=
-+	    lt_prog_compiler_static_CXX='-non_shared'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      psos*)
-+	;;
-+      solaris*)
-+	case $cc_basename in
-+	  CC*)
-+	    # Sun C++ 4.2, 5.x and Centerline C++
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    lt_prog_compiler_wl_CXX='-Qoption ld '
-+	    ;;
-+	  gcx*)
-+	    # Green Hills C++ Compiler
-+	    lt_prog_compiler_pic_CXX='-PIC'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      sunos4*)
-+	case $cc_basename in
-+	  CC*)
-+	    # Sun C++ 4.x
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	  lcc*)
-+	    # Lucid
-+	    lt_prog_compiler_pic_CXX='-pic'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      tandem*)
-+	case $cc_basename in
-+	  NCC*)
-+	    # NonStop-UX NCC 3.20
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    ;;
-+	  *)
-+	    ;;
-+	esac
-+	;;
-+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+	case $cc_basename in
-+	  CC*)
-+	    lt_prog_compiler_wl_CXX='-Wl,'
-+	    lt_prog_compiler_pic_CXX='-KPIC'
-+	    lt_prog_compiler_static_CXX='-Bstatic'
-+	    ;;
-+	esac
-+	;;
-+      vxworks*)
-+	;;
-+      *)
-+	lt_prog_compiler_can_build_shared_CXX=no
-+	;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_CXX"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_CXX=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:12232: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:12236: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_CXX=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-+    case $lt_prog_compiler_pic_CXX in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_CXX=
-+     lt_prog_compiler_can_build_shared_CXX=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_CXX=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_CXX=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_CXX=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_CXX=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_CXX=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_CXX=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:12336: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:12340: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_CXX=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  case $host_os in
-+  aix4* | aix5*)
-+    # If we're using GNU nm, then we don't want the "-C" option.
-+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+    else
-+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+    fi
-+    ;;
-+  pw32*)
-+    export_symbols_cmds_CXX="$ltdll_cmds"
-+  ;;
-+  cygwin* | mingw*)
-+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+  ;;
-+  *)
-+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  ;;
-+  esac
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_CXX" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_CXX=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_CXX in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_CXX
-+	pic_flag=$lt_prog_compiler_pic_CXX
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-+        allow_undefined_flag_CXX=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_CXX=no
-+        else
-+	  archive_cmds_need_lc_CXX=yes
-+        fi
-+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_CXX=
-+if test -n "$hardcode_libdir_flag_spec_CXX" || \
-+   test -n "$runpath_var_CXX" || \
-+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_CXX" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-+     test "$hardcode_minus_L_CXX" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_CXX=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_CXX=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_CXX=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-+
-+if test "$hardcode_action_CXX" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_CXX \
-+    CC_CXX \
-+    LD_CXX \
-+    lt_prog_compiler_wl_CXX \
-+    lt_prog_compiler_pic_CXX \
-+    lt_prog_compiler_static_CXX \
-+    lt_prog_compiler_no_builtin_flag_CXX \
-+    export_dynamic_flag_spec_CXX \
-+    thread_safe_flag_spec_CXX \
-+    whole_archive_flag_spec_CXX \
-+    enable_shared_with_static_runtimes_CXX \
-+    old_archive_cmds_CXX \
-+    old_archive_from_new_cmds_CXX \
-+    predep_objects_CXX \
-+    postdep_objects_CXX \
-+    predeps_CXX \
-+    postdeps_CXX \
-+    compiler_lib_search_path_CXX \
-+    archive_cmds_CXX \
-+    archive_expsym_cmds_CXX \
-+    postinstall_cmds_CXX \
-+    postuninstall_cmds_CXX \
-+    old_archive_from_expsyms_cmds_CXX \
-+    allow_undefined_flag_CXX \
-+    no_undefined_flag_CXX \
-+    export_symbols_cmds_CXX \
-+    hardcode_libdir_flag_spec_CXX \
-+    hardcode_libdir_flag_spec_ld_CXX \
-+    hardcode_libdir_separator_CXX \
-+    hardcode_automatic_CXX \
-+    module_cmds_CXX \
-+    module_expsym_cmds_CXX \
-+    lt_cv_prog_compiler_c_o_CXX \
-+    fix_srcfile_path_CXX \
-+    exclude_expsyms_CXX \
-+    include_expsyms_CXX; do
-+
-+    case $var in
-+    old_archive_cmds_CXX | \
-+    old_archive_from_new_cmds_CXX | \
-+    archive_cmds_CXX | \
-+    archive_expsym_cmds_CXX | \
-+    module_cmds_CXX | \
-+    module_expsym_cmds_CXX | \
-+    old_archive_from_expsyms_cmds_CXX | \
-+    export_symbols_cmds_CXX | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_CXX
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_CXX
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_CXX
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_CXX
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_CXX
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_CXX
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_CXX
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_CXX
-+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_CXX
-+module_expsym_cmds=$lt_module_expsym_cmds_CXX
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_CXX
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_CXX
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_CXX
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_CXX
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_CXX
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_CXX
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_CXX
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_CXX
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_CXX
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_CXX
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_CXX
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_CXX
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_CXX
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      F77)
-+	if test -n "$F77" && test "X$F77" != "Xno"; then
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+
-+
-+archive_cmds_need_lc_F77=no
-+allow_undefined_flag_F77=
-+always_export_symbols_F77=no
-+archive_expsym_cmds_F77=
-+export_dynamic_flag_spec_F77=
-+hardcode_direct_F77=no
-+hardcode_libdir_flag_spec_F77=
-+hardcode_libdir_flag_spec_ld_F77=
-+hardcode_libdir_separator_F77=
-+hardcode_minus_L_F77=no
-+hardcode_automatic_F77=no
-+module_cmds_F77=
-+module_expsym_cmds_F77=
-+link_all_deplibs_F77=unknown
-+old_archive_cmds_F77=$old_archive_cmds
-+no_undefined_flag_F77=
-+whole_archive_flag_spec_F77=
-+enable_shared_with_static_runtimes_F77=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+objext_F77=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="\
-+      subroutine t
-+      return
-+      end
-+"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="\
-+      program t
-+      end
-+"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+compiler_F77=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+  test "$enable_shared" = yes && enable_static=no
-+  if test -n "$RANLIB"; then
-+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+    postinstall_cmds='$RANLIB $lib'
-+  fi
-+  ;;
-+aix4* | aix5*)
-+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+    test "$enable_shared" = yes && enable_static=no
-+  fi
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+{ echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6; }
-+
-+GCC_F77="$G77"
-+LD_F77="$LD"
-+
-+lt_prog_compiler_wl_F77=
-+lt_prog_compiler_pic_F77=
-+lt_prog_compiler_static_F77=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl_F77='-Wl,'
-+    lt_prog_compiler_static_F77='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_F77='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared_F77=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_F77=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_F77='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic_F77='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      else
-+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic_F77='-qnocommon'
-+         lt_prog_compiler_wl_F77='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_F77='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl_F77='-Wl,'
-+	lt_prog_compiler_pic_F77='-KPIC'
-+	lt_prog_compiler_static_F77='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl_F77='-Wl,'
-+	lt_prog_compiler_pic_F77='-fpic'
-+	lt_prog_compiler_static_F77='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl_F77='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static_F77='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic_F77='-KPIC'
-+	  lt_prog_compiler_static_F77='-Bstatic'
-+	  lt_prog_compiler_wl_F77='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic_F77='-KPIC'
-+	  lt_prog_compiler_static_F77='-Bstatic'
-+	  lt_prog_compiler_wl_F77=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static_F77='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl_F77='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl_F77='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl_F77='-Qoption ld '
-+      lt_prog_compiler_pic_F77='-PIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic_F77='-Kconform_pic'
-+	lt_prog_compiler_static_F77='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_pic_F77='-KPIC'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl_F77='-Wl,'
-+      lt_prog_compiler_can_build_shared_F77=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic_F77='-pic'
-+      lt_prog_compiler_static_F77='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared_F77=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_F77"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_F77=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:13898: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:13902: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_F77=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
-+    case $lt_prog_compiler_pic_F77 in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_F77=
-+     lt_prog_compiler_can_build_shared_F77=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_F77=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_F77=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_F77=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_F77=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_F77=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_F77=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:14002: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:14006: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_F77=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag_F77=
-+  enable_shared_with_static_runtimes_F77=no
-+  archive_cmds_F77=
-+  archive_expsym_cmds_F77=
-+  old_archive_From_new_cmds_F77=
-+  old_archive_from_expsyms_cmds_F77=
-+  export_dynamic_flag_spec_F77=
-+  whole_archive_flag_spec_F77=
-+  thread_safe_flag_spec_F77=
-+  hardcode_libdir_flag_spec_F77=
-+  hardcode_libdir_flag_spec_ld_F77=
-+  hardcode_libdir_separator_F77=
-+  hardcode_direct_F77=no
-+  hardcode_minus_L_F77=no
-+  hardcode_shlibpath_var_F77=unsupported
-+  link_all_deplibs_F77=unknown
-+  hardcode_automatic_F77=no
-+  module_cmds_F77=
-+  module_expsym_cmds_F77=
-+  always_export_symbols_F77=no
-+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms_F77=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs_F77=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec_F77=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs_F77=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag_F77=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      allow_undefined_flag_F77=unsupported
-+      always_export_symbols_F77=no
-+      enable_shared_with_static_runtimes_F77=yes
-+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec_F77='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs_F77=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs_F77=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs_F77=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs_F77" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec_F77=
-+      export_dynamic_flag_spec_F77=
-+      whole_archive_flag_spec_F77=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag_F77=unsupported
-+      always_export_symbols_F77=yes
-+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L_F77=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct_F77=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds_F77=''
-+      hardcode_direct_F77=yes
-+      hardcode_libdir_separator_F77=':'
-+      link_all_deplibs_F77=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct_F77=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L_F77=yes
-+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-+  	  hardcode_libdir_separator_F77=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols_F77=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag_F77='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag_F77="-z nodefs"
-+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+      program main
-+
-+      end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_f77_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag_F77=' ${wl}-bernotok'
-+	  allow_undefined_flag_F77=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec_F77='$convenience'
-+	  archive_cmds_need_lc_F77=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec_F77=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec_F77=' '
-+      allow_undefined_flag_F77=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds_F77='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes_F77=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc_F77=no
-+      hardcode_direct_F77=no
-+      hardcode_automatic_F77=yes
-+      hardcode_shlibpath_var_F77=unsupported
-+      whole_archive_flag_spec_F77=''
-+      link_all_deplibs_F77=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_F77=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs_F77=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_F77=yes
-+      hardcode_minus_L_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      hardcode_direct_F77=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L_F77=yes
-+      export_dynamic_flag_spec_F77='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_F77=:
-+
-+	hardcode_direct_F77=yes
-+	export_dynamic_flag_spec_F77='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L_F77=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_F77=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-+	  hardcode_direct_F77=no
-+	  hardcode_shlibpath_var_F77=no
-+	  ;;
-+	*)
-+	  hardcode_direct_F77=yes
-+	  export_dynamic_flag_spec_F77='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L_F77=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      link_all_deplibs_F77=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_F77=yes
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct_F77=yes
-+	hardcode_shlibpath_var_F77=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec_F77='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec_F77='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs_F77=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_minus_L_F77=yes
-+      allow_undefined_flag_F77=unsupported
-+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag_F77=' -expect_unresolved \*'
-+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_F77=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag_F77=' -expect_unresolved \*'
-+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator_F77=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag_F77=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec_F77='-R$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs_F77=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_direct_F77=yes
-+      hardcode_minus_L_F77=yes
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_F77=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-+	  hardcode_direct_F77=no
-+        ;;
-+	motorola)
-+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var_F77=no
-+      export_dynamic_flag_spec_F77='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var_F77=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs_F77=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag_F77='${wl}-z,text'
-+      archive_cmds_need_lc_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag_F77='${wl}-z,text'
-+      allow_undefined_flag_F77='${wl}-z,nodefs'
-+      archive_cmds_need_lc_F77=no
-+      hardcode_shlibpath_var_F77=no
-+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator_F77=':'
-+      link_all_deplibs_F77=yes
-+      export_dynamic_flag_spec_F77='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_F77='-L$libdir'
-+      hardcode_shlibpath_var_F77=no
-+      ;;
-+
-+    *)
-+      ld_shlibs_F77=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-+echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-+test "$ld_shlibs_F77" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_F77" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_F77=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_F77 in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_F77
-+	pic_flag=$lt_prog_compiler_pic_F77
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-+        allow_undefined_flag_F77=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_F77=no
-+        else
-+	  archive_cmds_need_lc_F77=yes
-+        fi
-+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_F77=
-+if test -n "$hardcode_libdir_flag_spec_F77" || \
-+   test -n "$runpath_var_F77" || \
-+   test "X$hardcode_automatic_F77" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_F77" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-+     test "$hardcode_minus_L_F77" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_F77=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_F77=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_F77=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-+echo "${ECHO_T}$hardcode_action_F77" >&6; }
-+
-+if test "$hardcode_action_F77" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_F77 \
-+    CC_F77 \
-+    LD_F77 \
-+    lt_prog_compiler_wl_F77 \
-+    lt_prog_compiler_pic_F77 \
-+    lt_prog_compiler_static_F77 \
-+    lt_prog_compiler_no_builtin_flag_F77 \
-+    export_dynamic_flag_spec_F77 \
-+    thread_safe_flag_spec_F77 \
-+    whole_archive_flag_spec_F77 \
-+    enable_shared_with_static_runtimes_F77 \
-+    old_archive_cmds_F77 \
-+    old_archive_from_new_cmds_F77 \
-+    predep_objects_F77 \
-+    postdep_objects_F77 \
-+    predeps_F77 \
-+    postdeps_F77 \
-+    compiler_lib_search_path_F77 \
-+    archive_cmds_F77 \
-+    archive_expsym_cmds_F77 \
-+    postinstall_cmds_F77 \
-+    postuninstall_cmds_F77 \
-+    old_archive_from_expsyms_cmds_F77 \
-+    allow_undefined_flag_F77 \
-+    no_undefined_flag_F77 \
-+    export_symbols_cmds_F77 \
-+    hardcode_libdir_flag_spec_F77 \
-+    hardcode_libdir_flag_spec_ld_F77 \
-+    hardcode_libdir_separator_F77 \
-+    hardcode_automatic_F77 \
-+    module_cmds_F77 \
-+    module_expsym_cmds_F77 \
-+    lt_cv_prog_compiler_c_o_F77 \
-+    fix_srcfile_path_F77 \
-+    exclude_expsyms_F77 \
-+    include_expsyms_F77; do
-+
-+    case $var in
-+    old_archive_cmds_F77 | \
-+    old_archive_from_new_cmds_F77 | \
-+    archive_cmds_F77 | \
-+    archive_expsym_cmds_F77 | \
-+    module_cmds_F77 | \
-+    module_expsym_cmds_F77 | \
-+    old_archive_from_expsyms_cmds_F77 | \
-+    export_symbols_cmds_F77 | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_F77
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_F77
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_F77
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_F77
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_F77
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_F77
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_F77
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_F77
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_F77
-+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_F77
-+module_expsym_cmds=$lt_module_expsym_cmds_F77
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_F77
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_F77
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_F77
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_F77
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_F77
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_F77
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_F77
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_F77
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_F77
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_F77
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_F77
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_F77
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_F77
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      GCJ)
-+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+objext_GCJ=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+compiler_GCJ=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+archive_cmds_need_lc_GCJ=no
-+
-+old_archive_cmds_GCJ=$old_archive_cmds
-+
-+
-+lt_prog_compiler_no_builtin_flag_GCJ=
-+
-+if test "$GCC" = yes; then
-+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_rtti_exceptions=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="-fno-rtti -fno-exceptions"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16189: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:16193: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_rtti_exceptions=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-+else
-+    :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl_GCJ=
-+lt_prog_compiler_pic_GCJ=
-+lt_prog_compiler_static_GCJ=
-+
-+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-+
-+  if test "$GCC" = yes; then
-+    lt_prog_compiler_wl_GCJ='-Wl,'
-+    lt_prog_compiler_static_GCJ='-static'
-+
-+    case $host_os in
-+      aix*)
-+      # All AIX code is PIC.
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      # FIXME: we need at least 68020 code to build shared libraries, but
-+      # adding the `-m68020' flag to GCC prevents building anything better,
-+      # like `-m68040'.
-+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-+      ;;
-+
-+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+      # PIC is the default for these OSes.
-+      ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-+      # (--disable-auto-import) libraries
-+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      # PIC is the default on this platform
-+      # Common symbols not allowed in MH_DYLIB files
-+      lt_prog_compiler_pic_GCJ='-fno-common'
-+      ;;
-+
-+    interix[3-9]*)
-+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+      # Instead, we relocate shared libraries at runtime.
-+      ;;
-+
-+    msdosdjgpp*)
-+      # Just because we use GCC doesn't mean we suddenly get shared libraries
-+      # on systems that don't support them.
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      enable_shared=no
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	lt_prog_compiler_pic_GCJ=-Kconform_pic
-+      fi
-+      ;;
-+
-+    hpux*)
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_GCJ='-fPIC'
-+	;;
-+      esac
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_pic_GCJ='-fPIC'
-+      ;;
-+    esac
-+  else
-+    # PORTME Check for flag to pass linker flags through the system compiler.
-+    case $host_os in
-+    aix*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      if test "$host_cpu" = ia64; then
-+	# AIX 5 now supports IA64 processor
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      else
-+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-+      fi
-+      ;;
-+      darwin*)
-+        # PIC is the default on this platform
-+        # Common symbols not allowed in MH_DYLIB files
-+       case $cc_basename in
-+         xlc*)
-+         lt_prog_compiler_pic_GCJ='-qnocommon'
-+         lt_prog_compiler_wl_GCJ='-Wl,'
-+         ;;
-+       esac
-+       ;;
-+
-+    mingw* | cygwin* | pw32* | os2*)
-+      # This hack is so that the source file can tell whether it is being
-+      # built for inclusion in a dll (and should export symbols for example).
-+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+      ;;
-+
-+    hpux9* | hpux10* | hpux11*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+      # not for PA HP-UX.
-+      case $host_cpu in
-+      hppa*64*|ia64*)
-+	# +Z the default
-+	;;
-+      *)
-+	lt_prog_compiler_pic_GCJ='+Z'
-+	;;
-+      esac
-+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # PIC (with -KPIC) is the default.
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    newsos6)
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    linux* | k*bsd*-gnu)
-+      case $cc_basename in
-+      icc* | ecc*)
-+	lt_prog_compiler_wl_GCJ='-Wl,'
-+	lt_prog_compiler_pic_GCJ='-KPIC'
-+	lt_prog_compiler_static_GCJ='-static'
-+        ;;
-+      pgcc* | pgf77* | pgf90* | pgf95*)
-+        # Portland Group compilers (*not* the Pentium gcc compiler,
-+	# which looks to be a dead project)
-+	lt_prog_compiler_wl_GCJ='-Wl,'
-+	lt_prog_compiler_pic_GCJ='-fpic'
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+        ;;
-+      ccc*)
-+        lt_prog_compiler_wl_GCJ='-Wl,'
-+        # All Alpha code is PIC.
-+        lt_prog_compiler_static_GCJ='-non_shared'
-+        ;;
-+      *)
-+        case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)
-+	  # Sun C 5.9
-+	  lt_prog_compiler_pic_GCJ='-KPIC'
-+	  lt_prog_compiler_static_GCJ='-Bstatic'
-+	  lt_prog_compiler_wl_GCJ='-Wl,'
-+	  ;;
-+	*Sun\ F*)
-+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-+	  lt_prog_compiler_pic_GCJ='-KPIC'
-+	  lt_prog_compiler_static_GCJ='-Bstatic'
-+	  lt_prog_compiler_wl_GCJ=''
-+	  ;;
-+	esac
-+	;;
-+      esac
-+      ;;
-+
-+    osf3* | osf4* | osf5*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      # All OSF/1 code is PIC.
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    rdos*)
-+      lt_prog_compiler_static_GCJ='-non_shared'
-+      ;;
-+
-+    solaris*)
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      case $cc_basename in
-+      f77* | f90* | f95*)
-+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-+      *)
-+	lt_prog_compiler_wl_GCJ='-Wl,';;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      lt_prog_compiler_wl_GCJ='-Qoption ld '
-+      lt_prog_compiler_pic_GCJ='-PIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    sysv4 | sysv4.2uw2* | sysv4.3*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec ;then
-+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-+	lt_prog_compiler_static_GCJ='-Bstatic'
-+      fi
-+      ;;
-+
-+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_pic_GCJ='-KPIC'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    unicos*)
-+      lt_prog_compiler_wl_GCJ='-Wl,'
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      ;;
-+
-+    uts4*)
-+      lt_prog_compiler_pic_GCJ='-pic'
-+      lt_prog_compiler_static_GCJ='-Bstatic'
-+      ;;
-+
-+    *)
-+      lt_prog_compiler_can_build_shared_GCJ=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_GCJ"; then
-+
-+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_pic_works_GCJ=no
-+  ac_outfile=conftest.$ac_objext
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   # The option is referenced via a variable to avoid confusing sed.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16479: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>conftest.err)
-+   ac_status=$?
-+   cat conftest.err >&5
-+   echo "$as_me:16483: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s "$ac_outfile"; then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings other than the usual output.
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+       lt_prog_compiler_pic_works_GCJ=yes
-+     fi
-+   fi
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-+
-+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-+    case $lt_prog_compiler_pic_GCJ in
-+     "" | " "*) ;;
-+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-+     esac
-+else
-+    lt_prog_compiler_pic_GCJ=
-+     lt_prog_compiler_can_build_shared_GCJ=no
-+fi
-+
-+fi
-+case $host_os in
-+  # For platforms which do not support PIC, -DPIC is meaningless:
-+  *djgpp*)
-+    lt_prog_compiler_pic_GCJ=
-+    ;;
-+  *)
-+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-+    ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_prog_compiler_static_works_GCJ=no
-+   save_LDFLAGS="$LDFLAGS"
-+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+     # The linker can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     if test -s conftest.err; then
-+       # Append any errors to the config.log.
-+       cat conftest.err 1>&5
-+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+       if diff conftest.exp conftest.er2 >/dev/null; then
-+         lt_prog_compiler_static_works_GCJ=yes
-+       fi
-+     else
-+       lt_prog_compiler_static_works_GCJ=yes
-+     fi
-+   fi
-+   $rm conftest*
-+   LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-+
-+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
-+    :
-+else
-+    lt_prog_compiler_static_GCJ=
-+fi
-+
-+
-+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  lt_cv_prog_compiler_c_o_GCJ=no
-+   $rm -r conftest 2>/dev/null
-+   mkdir conftest
-+   cd conftest
-+   mkdir out
-+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+   lt_compiler_flag="-o out/conftest2.$ac_objext"
-+   # Insert the option either (1) after the last *FLAGS variable, or
-+   # (2) before a word containing "conftest.", or (3) at the end.
-+   # Note that $ac_compile itself does not contain backslashes and begins
-+   # with a dollar sign (not a hyphen), so the echo should work correctly.
-+   lt_compile=`echo "$ac_compile" | $SED \
-+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+   -e 's:$: $lt_compiler_flag:'`
-+   (eval echo "\"\$as_me:16583: $lt_compile\"" >&5)
-+   (eval "$lt_compile" 2>out/conftest.err)
-+   ac_status=$?
-+   cat out/conftest.err >&5
-+   echo "$as_me:16587: \$? = $ac_status" >&5
-+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+   then
-+     # The compiler can only warn and ignore the option if not recognized
-+     # So say no if there are warnings
-+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+       lt_cv_prog_compiler_c_o_GCJ=yes
-+     fi
-+   fi
-+   chmod u+w . 2>&5
-+   $rm conftest*
-+   # SGI C++ compiler will create directory out/ii_files/ for
-+   # template instantiation
-+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+   $rm out/* && rmdir out
-+   cd ..
-+   rmdir conftest
-+   $rm conftest*
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-+  # do not overwrite the value of need_locks provided by the user
-+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-+  hard_links=yes
-+  $rm conftest*
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  touch conftest.a
-+  ln conftest.a conftest.b 2>&5 || hard_links=no
-+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+  { echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6; }
-+  if test "$hard_links" = no; then
-+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+    need_locks=warn
-+  fi
-+else
-+  need_locks=no
-+fi
-+
-+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-+
-+  runpath_var=
-+  allow_undefined_flag_GCJ=
-+  enable_shared_with_static_runtimes_GCJ=no
-+  archive_cmds_GCJ=
-+  archive_expsym_cmds_GCJ=
-+  old_archive_From_new_cmds_GCJ=
-+  old_archive_from_expsyms_cmds_GCJ=
-+  export_dynamic_flag_spec_GCJ=
-+  whole_archive_flag_spec_GCJ=
-+  thread_safe_flag_spec_GCJ=
-+  hardcode_libdir_flag_spec_GCJ=
-+  hardcode_libdir_flag_spec_ld_GCJ=
-+  hardcode_libdir_separator_GCJ=
-+  hardcode_direct_GCJ=no
-+  hardcode_minus_L_GCJ=no
-+  hardcode_shlibpath_var_GCJ=unsupported
-+  link_all_deplibs_GCJ=unknown
-+  hardcode_automatic_GCJ=no
-+  module_cmds_GCJ=
-+  module_expsym_cmds_GCJ=
-+  always_export_symbols_GCJ=no
-+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+  # include_expsyms should be a list of space-separated symbols to be *always*
-+  # included in the symbol list
-+  include_expsyms_GCJ=
-+  # exclude_expsyms can be an extended regexp of symbols to exclude
-+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+  # as well as any symbol that contains `d'.
-+  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+  # platforms (ab)use it in PIC code, but their linkers get confused if
-+  # the symbol is explicitly referenced.  Since portable code cannot
-+  # rely on this symbol name, it's probably fine to never include it in
-+  # preloaded symbol tables.
-+  extract_expsyms_cmds=
-+  # Just being paranoid about ensuring that cc_basename is set.
-+  for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+  case $host_os in
-+  cygwin* | mingw* | pw32*)
-+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+    # When not using gcc, we currently assume that we are using
-+    # Microsoft Visual C++.
-+    if test "$GCC" != yes; then
-+      with_gnu_ld=no
-+    fi
-+    ;;
-+  interix*)
-+    # we just hope/assume this is gcc and not c89 (= MSVC++)
-+    with_gnu_ld=yes
-+    ;;
-+  openbsd*)
-+    with_gnu_ld=no
-+    ;;
-+  esac
-+
-+  ld_shlibs_GCJ=yes
-+  if test "$with_gnu_ld" = yes; then
-+    # If archive_cmds runs LD, not CC, wlarc should be empty
-+    wlarc='${wl}'
-+
-+    # Set some defaults for GNU ld with shared library support. These
-+    # are reset later if shared libraries are not supported. Putting them
-+    # here allows them to be overridden if necessary.
-+    runpath_var=LD_RUN_PATH
-+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-+    # ancient GNU ld didn't support --whole-archive et. al.
-+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+      else
-+  	whole_archive_flag_spec_GCJ=
-+    fi
-+    supports_anon_versioning=no
-+    case `$LD -v 2>/dev/null` in
-+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+      *\ 2.11.*) ;; # other 2.11 versions
-+      *) supports_anon_versioning=yes ;;
-+    esac
-+
-+    # See if GNU ld supports shared libraries.
-+    case $host_os in
-+    aix3* | aix4* | aix5*)
-+      # On AIX/PPC, the GNU linker is very broken
-+      if test "$host_cpu" != ia64; then
-+	ld_shlibs_GCJ=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support.  If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+
-+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+      # that the semantics of dynamic libraries on AmigaOS, at least up
-+      # to version 4, is to share data among multiple programs linked
-+      # with the same dynamic library.  Since this doesn't match the
-+      # behavior of shared libraries on other platforms, we can't use
-+      # them.
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    beos*)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	allow_undefined_flag_GCJ=unsupported
-+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+	# support --undefined.  This deserves some investigation.  FIXME
-+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-+      # as there is no search path for DLLs.
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      allow_undefined_flag_GCJ=unsupported
-+      always_export_symbols_GCJ=no
-+      enable_shared_with_static_runtimes_GCJ=yes
-+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+
-+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+	# If the export-symbols file already is a .def file (1st line
-+	# is EXPORTS), use it as is; otherwise, prepend...
-+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+	  cp $export_symbols $output_objdir/$soname.def;
-+	else
-+	  echo EXPORTS > $output_objdir/$soname.def;
-+	  cat $export_symbols >> $output_objdir/$soname.def;
-+	fi~
-+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    interix[3-9]*)
-+      hardcode_direct_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+      export_dynamic_flag_spec_GCJ='${wl}-E'
-+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+      # Instead, shared libraries are loaded at an image base (0x10000000 by
-+      # default) and relocated if they conflict, which is a slow very memory
-+      # consuming and fragmenting process.  To avoid this, we pick a random,
-+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+      ;;
-+
-+    gnu* | linux* | k*bsd*-gnu)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	tmp_addflag=
-+	case $cc_basename,$host_cpu in
-+	pgcc*)				# Portland Group C compiler
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag'
-+	  ;;
-+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_addflag=' $pic_flag -Mnomain' ;;
-+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-+	  tmp_addflag=' -i_dynamic' ;;
-+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-+	ifc* | ifort*)			# Intel Fortran compiler
-+	  tmp_addflag=' -nofor_main' ;;
-+	esac
-+	case `$CC -V 2>&1 | sed 5q` in
-+	*Sun\ C*)			# Sun C 5.9
-+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+	  tmp_sharedflag='-G' ;;
-+	*Sun\ F*)			# Sun Fortran 8.3
-+	  tmp_sharedflag='-G' ;;
-+	*)
-+	  tmp_sharedflag='-shared' ;;
-+	esac
-+	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+	if test $supports_anon_versioning = yes; then
-+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+  $echo "local: *; };" >> $output_objdir/$libname.ver~
-+	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+	fi
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+	wlarc=
-+      else
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      fi
-+      ;;
-+
-+    solaris*)
-+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+	ld_shlibs_GCJ=no
-+	cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+      case `$LD -v 2>&1` in
-+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+	ld_shlibs_GCJ=no
-+	cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems.  Therefore, libtool
-+*** is disabling shared libraries support.  We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+	;;
-+	*)
-+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+	  else
-+	    ld_shlibs_GCJ=no
-+	  fi
-+	;;
-+      esac
-+      ;;
-+
-+    sunos4*)
-+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      wlarc=
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    *)
-+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+    esac
-+
-+    if test "$ld_shlibs_GCJ" = no; then
-+      runpath_var=
-+      hardcode_libdir_flag_spec_GCJ=
-+      export_dynamic_flag_spec_GCJ=
-+      whole_archive_flag_spec_GCJ=
-+    fi
-+  else
-+    # PORTME fill in a description of your system's linker (not GNU ld)
-+    case $host_os in
-+    aix3*)
-+      allow_undefined_flag_GCJ=unsupported
-+      always_export_symbols_GCJ=yes
-+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+      # Note: this linker hardcodes the directories in LIBPATH if there
-+      # are no directories specified by -L.
-+      hardcode_minus_L_GCJ=yes
-+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+	# Neither direct hardcoding nor static linking is supported with a
-+	# broken collect2.
-+	hardcode_direct_GCJ=unsupported
-+      fi
-+      ;;
-+
-+    aix4* | aix5*)
-+      if test "$host_cpu" = ia64; then
-+	# On IA64, the linker does run time linking by default, so we don't
-+	# have to do anything special.
-+	aix_use_runtimelinking=no
-+	exp_sym_flag='-Bexport'
-+	no_entry_flag=""
-+      else
-+	# If we're using GNU nm, then we don't want the "-C" option.
-+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	else
-+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+	fi
-+	aix_use_runtimelinking=no
-+
-+	# Test if we are trying to use run time linking or normal
-+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+	# need to do runtime linking.
-+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+	  for ld_flag in $LDFLAGS; do
-+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+  	    aix_use_runtimelinking=yes
-+  	    break
-+  	  fi
-+	  done
-+	  ;;
-+	esac
-+
-+	exp_sym_flag='-bexport'
-+	no_entry_flag='-bnoentry'
-+      fi
-+
-+      # When large executables or shared objects are built, AIX ld can
-+      # have problems creating the table of contents.  If linking a library
-+      # or program results in "error TOC overflow" add -mminimal-toc to
-+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+      archive_cmds_GCJ=''
-+      hardcode_direct_GCJ=yes
-+      hardcode_libdir_separator_GCJ=':'
-+      link_all_deplibs_GCJ=yes
-+
-+      if test "$GCC" = yes; then
-+	case $host_os in aix4.[012]|aix4.[012].*)
-+	# We only want to do this on AIX 4.2 and lower, the check
-+	# below for broken collect2 doesn't work under 4.3+
-+	  collect2name=`${CC} -print-prog-name=collect2`
-+	  if test -f "$collect2name" && \
-+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-+	  then
-+  	  # We have reworked collect2
-+  	  :
-+	  else
-+  	  # We have old collect2
-+  	  hardcode_direct_GCJ=unsupported
-+  	  # It fails to find uninstalled libraries when the uninstalled
-+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-+  	  # to unsupported forces relinking
-+  	  hardcode_minus_L_GCJ=yes
-+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+  	  hardcode_libdir_separator_GCJ=
-+	  fi
-+	  ;;
-+	esac
-+	shared_flag='-shared'
-+	if test "$aix_use_runtimelinking" = yes; then
-+	  shared_flag="$shared_flag "'${wl}-G'
-+	fi
-+      else
-+	# not using gcc
-+	if test "$host_cpu" = ia64; then
-+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+  	# chokes on -Wl,-G. The following line is correct:
-+	  shared_flag='-G'
-+	else
-+	  if test "$aix_use_runtimelinking" = yes; then
-+	    shared_flag='${wl}-G'
-+	  else
-+	    shared_flag='${wl}-bM:SRE'
-+	  fi
-+	fi
-+      fi
-+
-+      # It seems that -bexpall does not export symbols beginning with
-+      # underscore (_), so it is better to generate a list of symbols to export.
-+      always_export_symbols_GCJ=yes
-+      if test "$aix_use_runtimelinking" = yes; then
-+	# Warning - without using the other runtime loading flags (-brtl),
-+	# -berok will link without error, but may produce a broken library.
-+	allow_undefined_flag_GCJ='-berok'
-+       # Determine the default libpath from the value encoded in an empty executable.
-+       cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+       else
-+	if test "$host_cpu" = ia64; then
-+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-+	  allow_undefined_flag_GCJ="-z nodefs"
-+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+	else
-+	 # Determine the default libpath from the value encoded in an empty executable.
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+
-+lt_aix_libpath_sed='
-+    /Import File Strings/,/^$/ {
-+	/^0/ {
-+	    s/^0  *\(.*\)$/\1/
-+	    p
-+	}
-+    }'
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then
-+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+fi
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+	  # Warning - without using the other run time loading flags,
-+	  # -berok will link without error, but may produce a broken library.
-+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-+	  allow_undefined_flag_GCJ=' ${wl}-berok'
-+	  # Exported symbols can be pulled into shared objects from archives
-+	  whole_archive_flag_spec_GCJ='$convenience'
-+	  archive_cmds_need_lc_GCJ=yes
-+	  # This is similar to how AIX traditionally builds its shared libraries.
-+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+	fi
-+      fi
-+      ;;
-+
-+    amigaos*)
-+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+      # see comment about different semantics on the GNU ld section
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    bsdi[45]*)
-+      export_dynamic_flag_spec_GCJ=-rdynamic
-+      ;;
-+
-+    cygwin* | mingw* | pw32*)
-+      # When not using gcc, we currently assume that we are using
-+      # Microsoft Visual C++.
-+      # hardcode_libdir_flag_spec is actually meaningless, as there is
-+      # no search path for DLLs.
-+      hardcode_libdir_flag_spec_GCJ=' '
-+      allow_undefined_flag_GCJ=unsupported
-+      # Tell ltmain to make .lib files, not .a files.
-+      libext=lib
-+      # Tell ltmain to make .dll files, not .so files.
-+      shrext_cmds=".dll"
-+      # FIXME: Setting linknames here is a bad hack.
-+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+      # The linker will automatically build a .lib file if we build a DLL.
-+      old_archive_From_new_cmds_GCJ='true'
-+      # FIXME: Should let the user specify the lib program.
-+      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-+      enable_shared_with_static_runtimes_GCJ=yes
-+      ;;
-+
-+    darwin* | rhapsody*)
-+      case $host_os in
-+        rhapsody* | darwin1.[012])
-+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-+         ;;
-+       *) # Darwin 1.3 on
-+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+         else
-+           case ${MACOSX_DEPLOYMENT_TARGET} in
-+             10.[012])
-+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+               ;;
-+             10.*)
-+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-+               ;;
-+           esac
-+         fi
-+         ;;
-+      esac
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_direct_GCJ=no
-+      hardcode_automatic_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=unsupported
-+      whole_archive_flag_spec_GCJ=''
-+      link_all_deplibs_GCJ=yes
-+    if test "$GCC" = yes ; then
-+    	output_verbose_link_cmd='echo'
-+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+    else
-+      case $cc_basename in
-+        xlc*)
-+         output_verbose_link_cmd='echo'
-+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+          ;;
-+       *)
-+         ld_shlibs_GCJ=no
-+          ;;
-+      esac
-+    fi
-+      ;;
-+
-+    dgux*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    freebsd1*)
-+      ld_shlibs_GCJ=no
-+      ;;
-+
-+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+    # support.  Future versions do this automatically, but an explicit c++rt0.o
-+    # does not break anything, and helps significantly (at the cost of a little
-+    # extra space).
-+    freebsd2.2*)
-+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+    freebsd2*)
-+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_GCJ=yes
-+      hardcode_minus_L_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+    freebsd* | dragonfly*)
-+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    hpux9*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      else
-+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      hardcode_direct_GCJ=yes
-+
-+      # hardcode_minus_L: Not really in the search PATH,
-+      # but as the default location of the library.
-+      hardcode_minus_L_GCJ=yes
-+      export_dynamic_flag_spec_GCJ='${wl}-E'
-+      ;;
-+
-+    hpux10*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_GCJ=:
-+
-+	hardcode_direct_GCJ=yes
-+	export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+	# hardcode_minus_L: Not really in the search PATH,
-+	# but as the default location of the library.
-+	hardcode_minus_L_GCJ=yes
-+      fi
-+      ;;
-+
-+    hpux11*)
-+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      else
-+	case $host_cpu in
-+	hppa*64*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	ia64*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	*)
-+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+	  ;;
-+	esac
-+      fi
-+      if test "$with_gnu_ld" = no; then
-+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+	hardcode_libdir_separator_GCJ=:
-+
-+	case $host_cpu in
-+	hppa*64*|ia64*)
-+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-+	  hardcode_direct_GCJ=no
-+	  hardcode_shlibpath_var_GCJ=no
-+	  ;;
-+	*)
-+	  hardcode_direct_GCJ=yes
-+	  export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+	  # hardcode_minus_L: Not really in the search PATH,
-+	  # but as the default location of the library.
-+	  hardcode_minus_L_GCJ=yes
-+	  ;;
-+	esac
-+      fi
-+      ;;
-+
-+    irix5* | irix6* | nonstopux*)
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      link_all_deplibs_GCJ=yes
-+      ;;
-+
-+    netbsd*)
-+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-+      else
-+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    newsos6)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_direct_GCJ=yes
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    openbsd*)
-+      if test -f /usr/libexec/ld.so; then
-+	hardcode_direct_GCJ=yes
-+	hardcode_shlibpath_var_GCJ=no
-+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+	  export_dynamic_flag_spec_GCJ='${wl}-E'
-+	else
-+	  case $host_os in
-+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+	     ;;
-+	   *)
-+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+	     ;;
-+	  esac
-+        fi
-+      else
-+	ld_shlibs_GCJ=no
-+      fi
-+      ;;
-+
-+    os2*)
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_minus_L_GCJ=yes
-+      allow_undefined_flag_GCJ=unsupported
-+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+      ;;
-+
-+    osf3*)
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+      else
-+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      hardcode_libdir_separator_GCJ=:
-+      ;;
-+
-+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-+      if test "$GCC" = yes; then
-+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+      else
-+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+	# Both c and cxx compiler support -rpath directly
-+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-+      fi
-+      hardcode_libdir_separator_GCJ=:
-+      ;;
-+
-+    solaris*)
-+      no_undefined_flag_GCJ=' -z text'
-+      if test "$GCC" = yes; then
-+	wlarc='${wl}'
-+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+      else
-+	wlarc=''
-+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      case $host_os in
-+      solaris2.[0-5] | solaris2.[0-5].*) ;;
-+      *)
-+	# The compiler driver will combine and reorder linker options,
-+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-+	# but is careful enough not to reorder.
-+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-+	if test "$GCC" = yes; then
-+	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+	else
-+	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-+	fi
-+	;;
-+      esac
-+      link_all_deplibs_GCJ=yes
-+      ;;
-+
-+    sunos4*)
-+      if test "x$host_vendor" = xsequent; then
-+	# Use $CC to link under sequent, because it throws in some extra .o
-+	# files that make .init and .fini sections work.
-+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+      fi
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_direct_GCJ=yes
-+      hardcode_minus_L_GCJ=yes
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    sysv4)
-+      case $host_vendor in
-+	sni)
-+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_GCJ=yes # is this really true???
-+	;;
-+	siemens)
-+	  ## LD is ld it makes a PLAMLIB
-+	  ## CC just makes a GrossModule.
-+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-+	  hardcode_direct_GCJ=no
-+        ;;
-+	motorola)
-+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-+	;;
-+      esac
-+      runpath_var='LD_RUN_PATH'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    sysv4.3*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_shlibpath_var_GCJ=no
-+      export_dynamic_flag_spec_GCJ='-Bexport'
-+      ;;
-+
-+    sysv4*MP*)
-+      if test -d /usr/nec; then
-+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+	hardcode_shlibpath_var_GCJ=no
-+	runpath_var=LD_RUN_PATH
-+	hardcode_runpath_var=yes
-+	ld_shlibs_GCJ=yes
-+      fi
-+      ;;
-+
-+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+      no_undefined_flag_GCJ='${wl}-z,text'
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    sysv5* | sco3.2v5* | sco5v6*)
-+      # Note: We can NOT use -z defs as we might desire, because we do not
-+      # link with -lc, and that would cause any symbols used from libc to
-+      # always be unresolved, which means just about no library would
-+      # ever link correctly.  If we're not using GNU ld we use -z text
-+      # though, which does catch some bad symbols but isn't as heavy-handed
-+      # as -z defs.
-+      no_undefined_flag_GCJ='${wl}-z,text'
-+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-+      archive_cmds_need_lc_GCJ=no
-+      hardcode_shlibpath_var_GCJ=no
-+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+      hardcode_libdir_separator_GCJ=':'
-+      link_all_deplibs_GCJ=yes
-+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-+      runpath_var='LD_RUN_PATH'
-+
-+      if test "$GCC" = yes; then
-+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      else
-+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+      fi
-+      ;;
-+
-+    uts4*)
-+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+      hardcode_shlibpath_var_GCJ=no
-+      ;;
-+
-+    *)
-+      ld_shlibs_GCJ=no
-+      ;;
-+    esac
-+  fi
-+
-+{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-+echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-+test "$ld_shlibs_GCJ" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_GCJ" in
-+x|xyes)
-+  # Assume -lc should be added
-+  archive_cmds_need_lc_GCJ=yes
-+
-+  if test "$enable_shared" = yes && test "$GCC" = yes; then
-+    case $archive_cmds_GCJ in
-+    *'~'*)
-+      # FIXME: we may have to deal with multi-command sequences.
-+      ;;
-+    '$CC '*)
-+      # Test whether the compiler implicitly links with -lc since on some
-+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+      # to ld, don't add -lc before -lgcc.
-+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-+      $rm conftest*
-+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+  (eval $ac_compile) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } 2>conftest.err; then
-+        soname=conftest
-+        lib=conftest
-+        libobjs=conftest.$ac_objext
-+        deplibs=
-+        wl=$lt_prog_compiler_wl_GCJ
-+	pic_flag=$lt_prog_compiler_pic_GCJ
-+        compiler_flags=-v
-+        linker_flags=-v
-+        verstring=
-+        output_objdir=.
-+        libname=conftest
-+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-+        allow_undefined_flag_GCJ=
-+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+        then
-+	  archive_cmds_need_lc_GCJ=no
-+        else
-+	  archive_cmds_need_lc_GCJ=yes
-+        fi
-+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-+      else
-+        cat conftest.err 1>&5
-+      fi
-+      $rm conftest*
-+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
-+      ;;
-+    esac
-+  fi
-+  ;;
-+esac
-+
-+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+  shlibpath_var=LIBPATH
-+
-+  # AIX 3 has no versioning support, so we append a major version to the name.
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  ;;
-+
-+aix4* | aix5*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  hardcode_into_libs=yes
-+  if test "$host_cpu" = ia64; then
-+    # AIX 5 supports IA64
-+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  else
-+    # With GCC up to 2.95.x, collect2 would create an import file
-+    # for dependence libraries.  The import file would start with
-+    # the line `#! .'.  This would cause the generated library to
-+    # depend on `.', always an invalid library.  This was fixed in
-+    # development snapshots of GCC prior to 3.0.
-+    case $host_os in
-+      aix4 | aix4.[01] | aix4.[01].*)
-+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+	   echo ' yes '
-+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+	:
-+      else
-+	can_build_shared=no
-+      fi
-+      ;;
-+    esac
-+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+    # soname into executable. Probably we can add versioning support to
-+    # collect2, so additional links can be useful in future.
-+    if test "$aix_use_runtimelinking" = yes; then
-+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+      # instead of lib<name>.a to let people know that these are not
-+      # typical AIX shared libraries.
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    else
-+      # We preserve .a as extension for shared libraries through AIX4.2
-+      # and later when we are not doing run time linking.
-+      library_names_spec='${libname}${release}.a $libname.a'
-+      soname_spec='${libname}${release}${shared_ext}$major'
-+    fi
-+    shlibpath_var=LIBPATH
-+  fi
-+  ;;
-+
-+amigaos*)
-+  library_names_spec='$libname.ixlibrary $libname.a'
-+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+  ;;
-+
-+beos*)
-+  library_names_spec='${libname}${shared_ext}'
-+  dynamic_linker="$host_os ld.so"
-+  shlibpath_var=LIBRARY_PATH
-+  ;;
-+
-+bsdi[45]*)
-+  version_type=linux
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+  # the default ld.so.conf also contains /usr/contrib/lib and
-+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+  # libtool to hard-code these into programs
-+  ;;
-+
-+cygwin* | mingw* | pw32*)
-+  version_type=windows
-+  shrext_cmds=".dll"
-+  need_version=no
-+  need_lib_prefix=no
-+
-+  case $GCC,$host_os in
-+  yes,cygwin* | yes,mingw* | yes,pw32*)
-+    library_names_spec='$libname.dll.a'
-+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+    postinstall_cmds='base_file=`basename \${file}`~
-+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+      dldir=$destdir/`dirname \$dlpath`~
-+      test -d \$dldir || mkdir -p \$dldir~
-+      $install_prog $dir/$dlname \$dldir/$dlname~
-+      chmod a+x \$dldir/$dlname'
-+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+      dlpath=$dir/\$dldll~
-+       $rm \$dlpath'
-+    shlibpath_overrides_runpath=yes
-+
-+    case $host_os in
-+    cygwin*)
-+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+      ;;
-+    mingw*)
-+      # MinGW DLLs use traditional 'lib' prefix
-+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+        # It is most probably a Windows format PATH printed by
-+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+        # path with ; separators, and with drive letters. We can handle the
-+        # drive letters (cygwin fileutils understands them), so leave them,
-+        # especially as we might pass files found there to a mingw objdump,
-+        # which wouldn't understand a cygwinified path. Ahh.
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+      else
-+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+      fi
-+      ;;
-+    pw32*)
-+      # pw32 DLLs use 'pw' prefix rather than 'lib'
-+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+      ;;
-+    esac
-+    ;;
-+
-+  *)
-+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+    ;;
-+  esac
-+  dynamic_linker='Win32 ld.exe'
-+  # FIXME: first we should search . and the directory the executable is in
-+  shlibpath_var=PATH
-+  ;;
-+
-+darwin* | rhapsody*)
-+  dynamic_linker="$host_os dyld"
-+  version_type=darwin
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+  soname_spec='${libname}${release}${major}$shared_ext'
-+  shlibpath_overrides_runpath=yes
-+  shlibpath_var=DYLD_LIBRARY_PATH
-+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+
-+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+  ;;
-+
-+dgux*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+freebsd1*)
-+  dynamic_linker=no
-+  ;;
-+
-+freebsd* | dragonfly*)
-+  # DragonFly does not have aout.  When/if they implement a new
-+  # versioning mechanism, adjust this.
-+  if test -x /usr/bin/objformat; then
-+    objformat=`/usr/bin/objformat`
-+  else
-+    case $host_os in
-+    freebsd[123]*) objformat=aout ;;
-+    *) objformat=elf ;;
-+    esac
-+  fi
-+  version_type=freebsd-$objformat
-+  case $version_type in
-+    freebsd-elf*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+      need_version=no
-+      need_lib_prefix=no
-+      ;;
-+    freebsd-*)
-+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+      need_version=yes
-+      ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_os in
-+  freebsd2*)
-+    shlibpath_overrides_runpath=yes
-+    ;;
-+  freebsd3.[01]* | freebsdelf3.[01]*)
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+    shlibpath_overrides_runpath=no
-+    hardcode_into_libs=yes
-+    ;;
-+  *) # from 4.6 on, and DragonFly
-+    shlibpath_overrides_runpath=yes
-+    hardcode_into_libs=yes
-+    ;;
-+  esac
-+  ;;
-+
-+gnu*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+  # Give a soname corresponding to the major version so that dld.sl refuses to
-+  # link against other versions.
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  case $host_cpu in
-+  ia64*)
-+    shrext_cmds='.so'
-+    hardcode_into_libs=yes
-+    dynamic_linker="$host_os dld.so"
-+    shlibpath_var=LD_LIBRARY_PATH
-+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    if test "X$HPUX_IA64_MODE" = X32; then
-+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+    else
-+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+    fi
-+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+    ;;
-+   hppa*64*)
-+     shrext_cmds='.sl'
-+     hardcode_into_libs=yes
-+     dynamic_linker="$host_os dld.sl"
-+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+     soname_spec='${libname}${release}${shared_ext}$major'
-+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+     ;;
-+   *)
-+    shrext_cmds='.sl'
-+    dynamic_linker="$host_os dld.sl"
-+    shlibpath_var=SHLIB_PATH
-+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    ;;
-+  esac
-+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+  postinstall_cmds='chmod 555 $lib'
-+  ;;
-+
-+interix[3-9]*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  hardcode_into_libs=yes
-+  ;;
-+
-+irix5* | irix6* | nonstopux*)
-+  case $host_os in
-+    nonstopux*) version_type=nonstopux ;;
-+    *)
-+	if test "$lt_cv_prog_gnu_ld" = yes; then
-+		version_type=linux
-+	else
-+		version_type=irix
-+	fi ;;
-+  esac
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  case $host_os in
-+  irix5* | nonstopux*)
-+    libsuff= shlibsuff=
-+    ;;
-+  *)
-+    case $LD in # libtool.m4 will add one of these switches to LD
-+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+      libsuff= shlibsuff= libmagic=32-bit;;
-+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+      libsuff=32 shlibsuff=N32 libmagic=N32;;
-+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+    *) libsuff= shlibsuff= libmagic=never-match;;
-+    esac
-+    ;;
-+  esac
-+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+  shlibpath_overrides_runpath=no
-+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  hardcode_into_libs=yes
-+  ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+  dynamic_linker=no
-+  ;;
-+
-+# This must be Linux ELF.
-+linux* | k*bsd*-gnu)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+
-+  # Append ld.so.conf contents to the search path
-+  if test -f /etc/ld.so.conf; then
-+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+  fi
-+
-+  # We used to test for /lib/ld.so.1 and disable shared libraries on
-+  # powerpc, because MkLinux only supported shared libraries with the
-+  # GNU dynamic linker.  Since this was broken with cross compilers,
-+  # most powerpc-linux boxes support dynamic linking these days and
-+  # people can always --disable-shared, the test was removed, and we
-+  # assume the GNU/Linux dynamic linker is in use.
-+  dynamic_linker='GNU/Linux ld.so'
-+  ;;
-+
-+netbsd*)
-+  version_type=sunos
-+  need_lib_prefix=no
-+  need_version=no
-+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+    dynamic_linker='NetBSD (a.out) ld.so'
-+  else
-+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+    soname_spec='${libname}${release}${shared_ext}$major'
-+    dynamic_linker='NetBSD ld.elf_so'
-+  fi
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  ;;
-+
-+newsos6)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+nto-qnx*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  ;;
-+
-+openbsd*)
-+  version_type=sunos
-+  sys_lib_dlsearch_path_spec="/usr/lib"
-+  need_lib_prefix=no
-+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+  case $host_os in
-+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+    *)                         need_version=no  ;;
-+  esac
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+    case $host_os in
-+      openbsd2.[89] | openbsd2.[89].*)
-+	shlibpath_overrides_runpath=no
-+	;;
-+      *)
-+	shlibpath_overrides_runpath=yes
-+	;;
-+      esac
-+  else
-+    shlibpath_overrides_runpath=yes
-+  fi
-+  ;;
-+
-+os2*)
-+  libname_spec='$name'
-+  shrext_cmds=".dll"
-+  need_lib_prefix=no
-+  library_names_spec='$libname${shared_ext} $libname.a'
-+  dynamic_linker='OS/2 ld.exe'
-+  shlibpath_var=LIBPATH
-+  ;;
-+
-+osf3* | osf4* | osf5*)
-+  version_type=osf
-+  need_lib_prefix=no
-+  need_version=no
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+  ;;
-+
-+rdos*)
-+  dynamic_linker=no
-+  ;;
-+
-+solaris*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  hardcode_into_libs=yes
-+  # ldd complains unless libraries are executable
-+  postinstall_cmds='chmod +x $lib'
-+  ;;
-+
-+sunos4*)
-+  version_type=sunos
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=yes
-+  if test "$with_gnu_ld" = yes; then
-+    need_lib_prefix=no
-+  fi
-+  need_version=yes
-+  ;;
-+
-+sysv4 | sysv4.3*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  case $host_vendor in
-+    sni)
-+      shlibpath_overrides_runpath=no
-+      need_lib_prefix=no
-+      export_dynamic_flag_spec='${wl}-Blargedynsym'
-+      runpath_var=LD_RUN_PATH
-+      ;;
-+    siemens)
-+      need_lib_prefix=no
-+      ;;
-+    motorola)
-+      need_lib_prefix=no
-+      need_version=no
-+      shlibpath_overrides_runpath=no
-+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+      ;;
-+  esac
-+  ;;
-+
-+sysv4*MP*)
-+  if test -d /usr/nec ;then
-+    version_type=linux
-+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+    soname_spec='$libname${shared_ext}.$major'
-+    shlibpath_var=LD_LIBRARY_PATH
-+  fi
-+  ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+  version_type=freebsd-elf
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  hardcode_into_libs=yes
-+  if test "$with_gnu_ld" = yes; then
-+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+    shlibpath_overrides_runpath=no
-+  else
-+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+    shlibpath_overrides_runpath=yes
-+    case $host_os in
-+      sco3.2v5*)
-+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+	;;
-+    esac
-+  fi
-+  sys_lib_dlsearch_path_spec='/usr/lib'
-+  ;;
-+
-+uts4*)
-+  version_type=linux
-+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+  soname_spec='${libname}${release}${shared_ext}$major'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  ;;
-+
-+*)
-+  dynamic_linker=no
-+  ;;
-+esac
-+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6; }
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-+hardcode_action_GCJ=
-+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-+   test -n "$runpath_var_GCJ" || \
-+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-+
-+  # We can hardcode non-existant directories.
-+  if test "$hardcode_direct_GCJ" != no &&
-+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+     # have to relink, otherwise we might link with an installed library
-+     # when we should be linking with a yet-to-be-installed one
-+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-+     test "$hardcode_minus_L_GCJ" != no; then
-+    # Linking always hardcodes the temporary library directory.
-+    hardcode_action_GCJ=relink
-+  else
-+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+    hardcode_action_GCJ=immediate
-+  fi
-+else
-+  # We cannot hardcode anything, or else we can only hardcode existing
-+  # directories.
-+  hardcode_action_GCJ=unsupported
-+fi
-+{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-+echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-+
-+if test "$hardcode_action_GCJ" = relink; then
-+  # Fast installation is not supported
-+  enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+     test "$enable_shared" = no; then
-+  # Fast installation is not necessary
-+  enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_GCJ \
-+    CC_GCJ \
-+    LD_GCJ \
-+    lt_prog_compiler_wl_GCJ \
-+    lt_prog_compiler_pic_GCJ \
-+    lt_prog_compiler_static_GCJ \
-+    lt_prog_compiler_no_builtin_flag_GCJ \
-+    export_dynamic_flag_spec_GCJ \
-+    thread_safe_flag_spec_GCJ \
-+    whole_archive_flag_spec_GCJ \
-+    enable_shared_with_static_runtimes_GCJ \
-+    old_archive_cmds_GCJ \
-+    old_archive_from_new_cmds_GCJ \
-+    predep_objects_GCJ \
-+    postdep_objects_GCJ \
-+    predeps_GCJ \
-+    postdeps_GCJ \
-+    compiler_lib_search_path_GCJ \
-+    archive_cmds_GCJ \
-+    archive_expsym_cmds_GCJ \
-+    postinstall_cmds_GCJ \
-+    postuninstall_cmds_GCJ \
-+    old_archive_from_expsyms_cmds_GCJ \
-+    allow_undefined_flag_GCJ \
-+    no_undefined_flag_GCJ \
-+    export_symbols_cmds_GCJ \
-+    hardcode_libdir_flag_spec_GCJ \
-+    hardcode_libdir_flag_spec_ld_GCJ \
-+    hardcode_libdir_separator_GCJ \
-+    hardcode_automatic_GCJ \
-+    module_cmds_GCJ \
-+    module_expsym_cmds_GCJ \
-+    lt_cv_prog_compiler_c_o_GCJ \
-+    fix_srcfile_path_GCJ \
-+    exclude_expsyms_GCJ \
-+    include_expsyms_GCJ; do
-+
-+    case $var in
-+    old_archive_cmds_GCJ | \
-+    old_archive_from_new_cmds_GCJ | \
-+    archive_cmds_GCJ | \
-+    archive_expsym_cmds_GCJ | \
-+    module_cmds_GCJ | \
-+    module_expsym_cmds_GCJ | \
-+    old_archive_from_expsyms_cmds_GCJ | \
-+    export_symbols_cmds_GCJ | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_GCJ
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_GCJ
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_GCJ
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_GCJ
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_GCJ
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_GCJ
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_GCJ
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_GCJ
-+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_GCJ
-+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_GCJ
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_GCJ
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_GCJ
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_GCJ
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_GCJ
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_GCJ
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_GCJ
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_GCJ
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_GCJ
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_GCJ
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_GCJ
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	else
-+	  tagname=""
-+	fi
-+	;;
-+
-+      RC)
-+
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+objext_RC=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+echo "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+compiler_RC=$CC
-+for cc_temp in $compiler""; do
-+  case $cc_temp in
-+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+    \-*) ;;
-+    *) break;;
-+  esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+lt_cv_prog_compiler_c_o_RC=yes
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+  # See if we are running on zsh, and set the options which allow our commands through
-+  # without removal of \ escapes.
-+  if test -n "${ZSH_VERSION+set}" ; then
-+    setopt NO_GLOB_SUBST
-+  fi
-+  # Now quote all the things that may contain metacharacters while being
-+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-+  # variables and quote the copies for generation of the libtool script.
-+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+    SED SHELL STRIP \
-+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+    deplibs_check_method reload_flag reload_cmds need_locks \
-+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+    lt_cv_sys_global_symbol_to_c_name_address \
-+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+    old_postinstall_cmds old_postuninstall_cmds \
-+    compiler_RC \
-+    CC_RC \
-+    LD_RC \
-+    lt_prog_compiler_wl_RC \
-+    lt_prog_compiler_pic_RC \
-+    lt_prog_compiler_static_RC \
-+    lt_prog_compiler_no_builtin_flag_RC \
-+    export_dynamic_flag_spec_RC \
-+    thread_safe_flag_spec_RC \
-+    whole_archive_flag_spec_RC \
-+    enable_shared_with_static_runtimes_RC \
-+    old_archive_cmds_RC \
-+    old_archive_from_new_cmds_RC \
-+    predep_objects_RC \
-+    postdep_objects_RC \
-+    predeps_RC \
-+    postdeps_RC \
-+    compiler_lib_search_path_RC \
-+    archive_cmds_RC \
-+    archive_expsym_cmds_RC \
-+    postinstall_cmds_RC \
-+    postuninstall_cmds_RC \
-+    old_archive_from_expsyms_cmds_RC \
-+    allow_undefined_flag_RC \
-+    no_undefined_flag_RC \
-+    export_symbols_cmds_RC \
-+    hardcode_libdir_flag_spec_RC \
-+    hardcode_libdir_flag_spec_ld_RC \
-+    hardcode_libdir_separator_RC \
-+    hardcode_automatic_RC \
-+    module_cmds_RC \
-+    module_expsym_cmds_RC \
-+    lt_cv_prog_compiler_c_o_RC \
-+    fix_srcfile_path_RC \
-+    exclude_expsyms_RC \
-+    include_expsyms_RC; do
-+
-+    case $var in
-+    old_archive_cmds_RC | \
-+    old_archive_from_new_cmds_RC | \
-+    archive_cmds_RC | \
-+    archive_expsym_cmds_RC | \
-+    module_cmds_RC | \
-+    module_expsym_cmds_RC | \
-+    old_archive_from_expsyms_cmds_RC | \
-+    export_symbols_cmds_RC | \
-+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+    postinstall_cmds | postuninstall_cmds | \
-+    old_postinstall_cmds | old_postuninstall_cmds | \
-+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+      # Double-quote double-evaled strings.
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+      ;;
-+    *)
-+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+      ;;
-+    esac
-+  done
-+
-+  case $lt_echo in
-+  *'\$0 --fallback-echo"')
-+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+    ;;
-+  esac
-+
-+cfgfile="$ofile"
-+
-+  cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_RC
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_RC
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_RC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_RC
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_RC
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_RC
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_RC
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names.  First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_RC
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_RC
-+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_RC
-+module_expsym_cmds=$lt_module_expsym_cmds_RC
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_RC
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_RC
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_RC
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_RC
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_RC
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_RC
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_RC
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_RC
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_RC
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path=$lt_fix_srcfile_path
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_RC
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_RC
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_RC
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_RC
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+  # If there is no Makefile yet, we rely on a make rule to execute
-+  # `config.status --recheck' to rerun these tests and create the
-+  # libtool script then.
-+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+  if test -f "$ltmain_in"; then
-+    test -f Makefile && make "$ltmain"
-+  fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+	;;
-+
-+      *)
-+	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-+   { (exit 1); exit 1; }; }
-+	;;
-+      esac
-+
-+      # Append the new tag name to the list of available tags.
-+      if test -n "$tagname" ; then
-+      available_tags="$available_tags $tagname"
-+    fi
-+    fi
-+  done
-+  IFS="$lt_save_ifs"
-+
-+  # Now substitute the updated list of available tags.
-+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+    mv "${ofile}T" "$ofile"
-+    chmod +x "$ofile"
-+  else
-+    rm -f "${ofile}T"
-+    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-+   { (exit 1); exit 1; }; }
-+  fi
-+fi
-+
-+
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+
-+# Prevent multiple expansion
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+  ac_ct_CC=$CC
-+  # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="gcc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+else
-+  CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+          if test -n "$ac_tool_prefix"; then
-+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="${ac_tool_prefix}cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  fi
-+fi
-+if test -z "$CC"; then
-+  # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+       ac_prog_rejected=yes
-+       continue
-+     fi
-+    ac_cv_prog_CC="cc"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+if test $ac_prog_rejected = yes; then
-+  # We found a bogon in the path, so make sure we never use it.
-+  set dummy $ac_cv_prog_CC
-+  shift
-+  if test $# != 0; then
-+    # We chose a different compiler from the bogus one.
-+    # However, it has the same basename, so the bogon will be chosen
-+    # first if we set CC to just the basename; use the full file name.
-+    shift
-+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-+  fi
-+fi
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$CC"; then
-+  if test -n "$ac_tool_prefix"; then
-+  for ac_prog in cl.exe
-+  do
-+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+  { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+    test -n "$CC" && break
-+  done
-+fi
-+if test -z "$CC"; then
-+  ac_ct_CC=$CC
-+  for ac_prog in cl.exe
-+do
-+  # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$ac_ct_CC"; then
-+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_prog_ac_ct_CC="$ac_prog"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+  test -n "$ac_ct_CC" && break
-+done
-+
-+  if test "x$ac_ct_CC" = x; then
-+    CC=""
-+  else
-+    case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet.  If you think this
-+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+    CC=$ac_ct_CC
-+  fi
-+fi
-+
-+fi
-+
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+   { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler --version >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -v >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compiler -V >&5") 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }
-+
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+       choke me
-+#endif
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_compiler_gnu=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_compiler_gnu=no
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_save_c_werror_flag=$ac_c_werror_flag
-+   ac_c_werror_flag=yes
-+   ac_cv_prog_cc_g=no
-+   CFLAGS="-g"
-+   cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	CFLAGS=""
-+      cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  :
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+	ac_c_werror_flag=$ac_save_c_werror_flag
-+	 CFLAGS="-g"
-+	 cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+int
-+main ()
-+{
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+   ac_c_werror_flag=$ac_save_c_werror_flag
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+if test "$ac_test_CFLAGS" = set; then
-+  CFLAGS=$ac_save_CFLAGS
-+elif test $ac_cv_prog_cc_g = yes; then
-+  if test "$GCC" = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-g"
-+  fi
-+else
-+  if test "$GCC" = yes; then
-+    CFLAGS="-O2"
-+  else
-+    CFLAGS=
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_cv_prog_cc_c89=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-+   function prototypes and stuff, but not '\xHH' hex character constants.
-+   These don't provoke an error unfortunately, instead are silently treated
-+   as 'x'.  The following induces an error, until -std is added to get
-+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-+   array size at least.  It's necessary to write '\x00'==0 to get something
-+   that's true only with -std.  */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+   inside strings and character constants.  */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  ac_cv_prog_cc_c89=$ac_arg
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext
-+  test "x$ac_cv_prog_cc_c89" != "xno" && break
-+done
-+rm -f conftest.$ac_ext
-+CC=$ac_save_CC
-+
-+fi
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+  x)
-+    { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+  xno)
-+    { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
-+  *)
-+    CC="$CC $ac_cv_prog_cc_c89"
-+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+esac
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+depcc="$CC"   am_compiler_list=
-+
-+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-+  # We make a subdir and do the tests there.  Otherwise we can end up
-+  # making bogus files that we don't know about and never remove.  For
-+  # instance it was reported that on HP-UX the gcc test will end up
-+  # making a dummy file named `D' -- because `-MD' means `put the output
-+  # in D'.
-+  mkdir conftest.dir
-+  # Copy depcomp to subdir because otherwise we won't find it if we're
-+  # using a relative directory.
-+  cp "$am_depcomp" conftest.dir
-+  cd conftest.dir
-+
-+  am_cv_CC_dependencies_compiler_type=none
-+  if test "$am_compiler_list" = ""; then
-+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-+  fi
-+  for depmode in $am_compiler_list; do
-+    # We need to recreate these files for each test, as the compiler may
-+    # overwrite some of them when testing with obscure command lines.
-+    # This happens at least with the AIX C compiler.
-+    echo '#include "conftest.h"' > conftest.c
-+    echo 'int i;' > conftest.h
-+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-+
-+    case $depmode in
-+    nosideeffect)
-+      # after this tag, mechanisms are not by side-effect, so they'll
-+      # only be used when explicitly requested
-+      if test "x$enable_dependency_tracking" = xyes; then
-+	continue
-+      else
-+	break
-+      fi
-+      ;;
-+    none) break ;;
-+    esac
-+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-+    # mode.  It turns out that the SunPro C++ compiler does not properly
-+    # handle `-M -o', and we need to detect this.
-+    if depmode=$depmode \
-+       source=conftest.c object=conftest.o \
-+       depfile=conftest.Po tmpdepfile=conftest.TPo \
-+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-+      am_cv_CC_dependencies_compiler_type=$depmode
-+      break
-+    fi
-+  done
-+
-+  cd ..
-+  rm -rf conftest.dir
-+else
-+  am_cv_CC_dependencies_compiler_type=none
-+fi
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-+
-+
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for ${CC-cc} option to accept ANSI C" >&5
-+echo $ECHO_N "checking for ${CC-cc} option to accept ANSI C... $ECHO_C" >&6; }
-+if test "${am_cv_prog_cc_stdc+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  am_cv_prog_cc_stdc=no
-+ac_save_CC="$CC"
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX			-qlanglvl=ansi
-+# Ultrix and OSF/1	-std1
-+# HP-UX 10.20 and later	-Ae
-+# HP-UX older versions	-Aa -D_HPUX_SOURCE
-+# SVR4			-Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+  CC="$ac_save_CC $ac_arg"
-+  cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+     char **p;
-+     int i;
-+{
-+  return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+  char *s;
-+  va_list v;
-+  va_start (v,p);
-+  s = g (p, va_arg (v,int));
-+  va_end (v);
-+  return s;
-+}
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+
-+int
-+main ()
-+{
-+
-+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-+
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_compile") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest.$ac_objext; then
-+  am_cv_prog_cc_stdc="$ac_arg"; break
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+CC="$ac_save_CC"
-+
-+fi
-+
-+if test -z "$am_cv_prog_cc_stdc"; then
-+  { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: $am_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$am_cv_prog_cc_stdc" >&6; }
-+fi
-+case "x$am_cv_prog_cc_stdc" in
-+  x|xno) ;;
-+  *) CC="$CC $am_cv_prog_cc_stdc" ;;
-+esac
-+
-+
-+
-+{ echo "$as_me:$LINENO: checking for library containing strerror" >&5
-+echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; }
-+if test "${ac_cv_search_strerror+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_func_search_save_LIBS=$LIBS
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any GCC internal prototype to avoid an error.
-+   Use char because int might match the return type of a GCC
-+   builtin and then its argument prototype would still apply.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+char strerror ();
-+int
-+main ()
-+{
-+return strerror ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+for ac_lib in '' cposix; do
-+  if test -z "$ac_lib"; then
-+    ac_res="none required"
-+  else
-+    ac_res=-l$ac_lib
-+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-+  fi
-+  rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+  *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+  (eval "$ac_link") 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } && {
-+	 test -z "$ac_c_werror_flag" ||
-+	 test ! -s conftest.err
-+       } && test -s conftest$ac_exeext &&
-+       $as_test_x conftest$ac_exeext; then
-+  ac_cv_search_strerror=$ac_res
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-+      conftest$ac_exeext
-+  if test "${ac_cv_search_strerror+set}" = set; then
-+  break
-+fi
-+done
-+if test "${ac_cv_search_strerror+set}" = set; then
-+  :
-+else
-+  ac_cv_search_strerror=no
-+fi
-+rm conftest.$ac_ext
-+LIBS=$ac_func_search_save_LIBS
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
-+echo "${ECHO_T}$ac_cv_search_strerror" >&6; }
-+ac_res=$ac_cv_search_strerror
-+if test "$ac_res" != no; then
-+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-+
-+fi
-+
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
-+# ./install, which can be erroneously created by make from ./install.sh.
-+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+if test -z "$INSTALL"; then
-+if test "${ac_cv_path_install+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+  ./ | .// | /cC/* | \
-+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+  /usr/ucb/* ) ;;
-+  *)
-+    # OSF1 and SCO ODT 3.0 have their own names for install.
-+    # Don't use installbsd from OSF since it installs stuff as root
-+    # by default.
-+    for ac_prog in ginstall scoinst install; do
-+      for ac_exec_ext in '' $ac_executable_extensions; do
-+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-+	  if test $ac_prog = install &&
-+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  elif test $ac_prog = install &&
-+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+	    # program-specific install script used by HP pwplus--don't use.
-+	    :
-+	  else
-+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+	    break 3
-+	  fi
-+	fi
-+      done
-+    done
-+    ;;
-+esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL=$ac_cv_path_install
-+  else
-+    # As a last resort, use the slow shell script.  Don't cache a
-+    # value for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the value is a relative name.
-+    INSTALL=$ac_install_sh
-+  fi
-+fi
-+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6; }
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+
-+# Extract the first word of "db2ps", so it can be a program name with args.
-+set dummy db2ps; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_DB2PS+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $DB2PS in
-+  [\\/]* | ?:[\\/]*)
-+  ac_cv_path_DB2PS="$DB2PS" # Let the user override the test with a path.
-+  ;;
-+  *)
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_path_DB2PS="$as_dir/$ac_word$ac_exec_ext"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+  ;;
-+esac
-+fi
-+DB2PS=$ac_cv_path_DB2PS
-+if test -n "$DB2PS"; then
-+  { echo "$as_me:$LINENO: result: $DB2PS" >&5
-+echo "${ECHO_T}$DB2PS" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+if test x${DB2PS} = x ; then
-+  { echo "$as_me:$LINENO: WARNING: PostScript documentation cannot be generated!" >&5
-+echo "$as_me: WARNING: PostScript documentation cannot be generated!" >&2;}
-+fi
-+
-+# Extract the first word of "ps2pdf", so it can be a program name with args.
-+set dummy ps2pdf; ac_word=$2
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+if test "${ac_cv_path_PS2PDF+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  case $PS2PDF in
-+  [\\/]* | ?:[\\/]*)
-+  ac_cv_path_PS2PDF="$PS2PDF" # Let the user override the test with a path.
-+  ;;
-+  *)
-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+    ac_cv_path_PS2PDF="$as_dir/$ac_word$ac_exec_ext"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+  ;;
-+esac
-+fi
-+PS2PDF=$ac_cv_path_PS2PDF
-+if test -n "$PS2PDF"; then
-+  { echo "$as_me:$LINENO: result: $PS2PDF" >&5
-+echo "${ECHO_T}$PS2PDF" >&6; }
-+else
-+  { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
-+fi
-+
-+
-+if test x${PS2PDF} = x ; then
-+  { echo "$as_me:$LINENO: WARNING: PDF documentation cannot be generated!" >&5
-+echo "$as_me: WARNING: PDF documentation cannot be generated!" >&2;}
-+fi
-+
-+
-+
-+
-+case ${host_os} in
-+  cygwin | mingw32 | pw32 | interix3 | interix | uwin) libijs_sysdeps="windows";;
-+  *) libijs_sysdeps="unix";;
-+esac
-+
-+
-+if test x$libijs_sysdeps = xwindows; then
-+  SYSDEPS_WINDOWS_TRUE=
-+  SYSDEPS_WINDOWS_FALSE='#'
-+else
-+  SYSDEPS_WINDOWS_TRUE='#'
-+  SYSDEPS_WINDOWS_FALSE=
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+ijs_libs="${IJS_LIBS} ${IJS_DEPLIBS}"
-+
-+
-+LIBIJS_LIBS="${LIBIJS_LIBS} ${IJS_DEPLIBS}"
-+
-+
-+
-+ac_config_files="$ac_config_files Makefile"
-+
-+ac_config_files="$ac_config_files ijs-config"
-+
-+ac_config_files="$ac_config_files ijs.pc"
-+
-+cat >confcache <<\_ACEOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems.  If it contains results you don't
-+# want to keep, you may remove or edit it.
-+#
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
-+#
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, we kill variables containing newlines.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(
-+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+    eval ac_val=\$$ac_var
-+    case $ac_val in #(
-+    *${as_nl}*)
-+      case $ac_var in #(
-+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+      esac
-+      case $ac_var in #(
-+      _ | IFS | as_nl) ;; #(
-+      *) $as_unset $ac_var ;;
-+      esac ;;
-+    esac
-+  done
-+
-+  (set) 2>&1 |
-+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+    *${as_nl}ac_space=\ *)
-+      # `set' does not quote correctly, so add quotes (double-quote
-+      # substitution turns \\\\ into \\, and sed turns \\ into \).
-+      sed -n \
-+	"s/'/'\\\\''/g;
-+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+      ;; #(
-+    *)
-+      # `set' quotes correctly as required by POSIX, so do not add quotes.
-+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-+      ;;
-+    esac |
-+    sort
-+) |
-+  sed '
-+     /^ac_cv_env_/b end
-+     t clear
-+     :clear
-+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+     t end
-+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+     :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+  if test -w "$cache_file"; then
-+    test "x$cache_file" != "x/dev/null" &&
-+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
-+    cat confcache >$cache_file
-+  else
-+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-+  fi
-+fi
-+rm -f confcache
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# Transform confdefs.h into DEFS.
-+# Protect against shell expansion while executing Makefile rules.
-+# Protect against Makefile macro expansion.
-+#
-+# If the first sed substitution is executed (which looks for macros that
-+# take arguments), then branch to the quote section.  Otherwise,
-+# look for a macro that doesn't take arguments.
-+ac_script='
-+t clear
-+:clear
-+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
-+t quote
-+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
-+t quote
-+b any
-+:quote
-+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+	g
-+	s/^\n//
-+	s/\n/ /g
-+	p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-+
-+
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+  # 1. Remove the extension, and $U if already installed.
-+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+  ac_i=`echo "$ac_i" | sed "$ac_script"`
-+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-+  #    will be set to the directory where LIBOBJS objects are built.
-+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-+
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"AMDEP\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+if test -z "${SYSDEPS_WINDOWS_TRUE}" && test -z "${SYSDEPS_WINDOWS_FALSE}"; then
-+  { { echo "$as_me:$LINENO: error: conditional \"SYSDEPS_WINDOWS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"SYSDEPS_WINDOWS\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+   { (exit 1); exit 1; }; }
-+fi
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate the current configuration.
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in config.log if it exists.
-+
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization.  ##
-+## --------------------- ##
-+
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+  emulate sh
-+  NULLCMD=:
-+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+  # is contrary to our usage.  Disable this feature.
-+  alias -g '${1+"$@"}'='"$@"'
-+  setopt NO_GLOB_SUBST
-+else
-+  case `(set -o) 2>/dev/null` in
-+  *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+  echo "#! /bin/sh" >conf$$.sh
-+  echo  "exit 0"   >>conf$$.sh
-+  chmod +x conf$$.sh
-+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+    PATH_SEPARATOR=';'
-+  else
-+    PATH_SEPARATOR=:
-+  fi
-+  rm -f conf$$.sh
-+fi
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+  as_unset=unset
-+else
-+  as_unset=false
-+fi
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.  Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" ""	$as_nl"
-+
-+# Find who we are.  Look in the path if we contain no directory separator.
-+case $0 in
-+  *[\\/]* ) as_myself=$0 ;;
-+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+     ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+  as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+  { (exit 1); exit 1; }
-+fi
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+  LC_TELEPHONE LC_TIME
-+do
-+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+    eval $as_var=C; export $as_var
-+  else
-+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+  fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-+  as_basename=basename
-+else
-+  as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename -- "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+	 X"$0" : 'X\(//\)$' \| \
-+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X/"$0" |
-+    sed '/^.*\/\([^/][^/]*\)\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\/\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+
-+  as_lineno_1=$LINENO
-+  as_lineno_2=$LINENO
-+  test "x$as_lineno_1" != "x$as_lineno_2" &&
-+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-+
-+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+  # uniformly replaced by the line number.  The first 'sed' inserts a
-+  # line-number line after each line using $LINENO; the second 'sed'
-+  # does the real work.  The second script uses 'N' to pair each
-+  # line-number line with the line containing $LINENO, and appends
-+  # trailing '-' during substitution so that $LINENO is not a special
-+  # case at line end.
-+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-+  # E. McMahon (1931-1989) for sed's syntax.  :-)
-+  sed -n '
-+    p
-+    /[$]LINENO/=
-+  ' <$as_myself |
-+    sed '
-+      s/[$]LINENO.*/&-/
-+      t lineno
-+      b
-+      :lineno
-+      N
-+      :loop
-+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-+      t loop
-+      s/-\n.*//
-+    ' >$as_me.lineno &&
-+  chmod +x "$as_me.lineno" ||
-+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+   { (exit 1); exit 1; }; }
-+
-+  # Don't try to exec as it changes $[0], causing all sort of problems
-+  # (the dirname of $[0] is not the place where we might find the
-+  # original and so on.  Autoconf is especially sensitive to this).
-+  . "./$as_me.lineno"
-+  # Exit status is that of the last command.
-+  exit
-+}
-+
-+
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+  as_dirname=dirname
-+else
-+  as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+  case `echo 'x\c'` in
-+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-+  *)   ECHO_C='\c';;
-+  esac;;
-+*)
-+  ECHO_N='-n';;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-+  as_expr=expr
-+else
-+  as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+  rm -f conf$$.dir/conf$$.file
-+else
-+  rm -f conf$$.dir
-+  mkdir conf$$.dir
-+fi
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s='ln -s'
-+  # ... but there are two gotchas:
-+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+  # In both cases, we have to default to `cp -p'.
-+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+    as_ln_s='cp -p'
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+  as_ln_s=ln
-+else
-+  as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-+
-+if mkdir -p . 2>/dev/null; then
-+  as_mkdir_p=:
-+else
-+  test -d ./-p && rmdir ./-p
-+  as_mkdir_p=false
-+fi
-+
-+if test -x / >/dev/null 2>&1; then
-+  as_test_x='test -x'
-+else
-+  if ls -dL / >/dev/null 2>&1; then
-+    as_ls_L_option=L
-+  else
-+    as_ls_L_option=
-+  fi
-+  as_test_x='
-+    eval sh -c '\''
-+      if test -d "$1"; then
-+        test -d "$1/.";
-+      else
-+	case $1 in
-+        -*)set "./$1";;
-+	esac;
-+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+	???[sx]*):;;*)false;;esac;fi
-+    '\'' sh
-+  '
-+fi
-+as_executable_p=$as_test_x
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+exec 6>&1
-+
-+# Save the log message, to keep $[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling.
-+ac_log="
-+This file was extended by ijs $as_me 0.35, which was
-+generated by GNU Autoconf 2.61.  Invocation command line was
-+
-+  CONFIG_FILES    = $CONFIG_FILES
-+  CONFIG_HEADERS  = $CONFIG_HEADERS
-+  CONFIG_LINKS    = $CONFIG_LINKS
-+  CONFIG_COMMANDS = $CONFIG_COMMANDS
-+  $ $0 $@
-+
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+# Files that config.status was made for.
-+config_files="$ac_config_files"
-+config_commands="$ac_config_commands"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+  -h, --help       print this help, then exit
-+  -V, --version    print version number and configuration settings, then exit
-+  -q, --quiet      do not print progress messages
-+  -d, --debug      don't remove temporary files
-+      --recheck    update $as_me by reconfiguring in the same conditions
-+  --file=FILE[:TEMPLATE]
-+		   instantiate the configuration file FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration commands:
-+$config_commands
-+
-+Report bugs to <bug-autoconf@gnu.org>."
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+ijs config.status 0.35
-+configured by $0, generated by GNU Autoconf 2.61,
-+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright (C) 2006 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
-+INSTALL='$INSTALL'
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value.  By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+  case $1 in
-+  --*=*)
-+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-+    ac_shift=:
-+    ;;
-+  *)
-+    ac_option=$1
-+    ac_optarg=$2
-+    ac_shift=shift
-+    ;;
-+  esac
-+
-+  case $ac_option in
-+  # Handling of the options.
-+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+    ac_cs_recheck=: ;;
-+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+    echo "$ac_cs_version"; exit ;;
-+  --debug | --debu | --deb | --de | --d | -d )
-+    debug=: ;;
-+  --file | --fil | --fi | --f )
-+    $ac_shift
-+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+    ac_need_defaults=false;;
-+  --he | --h |  --help | --hel | -h )
-+    echo "$ac_cs_usage"; exit ;;
-+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+    ac_cs_silent=: ;;
-+
-+  # This is an error.
-+  -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
-+   { (exit 1); exit 1; }; } ;;
-+
-+  *) ac_config_targets="$ac_config_targets $1"
-+     ac_need_defaults=false ;;
-+
-+  esac
-+  shift
-+done
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+  exec 6>/dev/null
-+  ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+  CONFIG_SHELL=$SHELL
-+  export CONFIG_SHELL
-+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+  echo
-+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+  echo "$ac_log"
-+} >&5
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+#
-+# INIT-COMMANDS
-+#
-+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
-+for ac_config_target in $ac_config_targets
-+do
-+  case $ac_config_target in
-+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+    "ijs-config") CONFIG_FILES="$CONFIG_FILES ijs-config" ;;
-+    "ijs.pc") CONFIG_FILES="$CONFIG_FILES ijs.pc" ;;
-+
-+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+   { (exit 1); exit 1; }; };;
-+  esac
-+done
-+
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used.  Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-+fi
-+
-+# Have a temporary directory for convenience.  Make it in the build tree
-+# simply because there is no reason against having it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
-+$debug ||
-+{
-+  tmp=
-+  trap 'exit_status=$?
-+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
-+  trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-+  test -n "$tmp" && test -d "$tmp"
-+}  ||
-+{
-+  tmp=./conf$$-$RANDOM
-+  (umask 077 && mkdir "$tmp")
-+} ||
-+{
-+   echo "$me: cannot create a temporary directory in ." >&2
-+   { (exit 1); exit 1; }
-+}
-+
-+#
-+# Set up the sed scripts for CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+  cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-+INSTALL_DATA!$INSTALL_DATA$ac_delim
-+PACKAGE!$PACKAGE$ac_delim
-+VERSION!$VERSION$ac_delim
-+ACLOCAL!$ACLOCAL$ac_delim
-+AUTOCONF!$AUTOCONF$ac_delim
-+AUTOMAKE!$AUTOMAKE$ac_delim
-+AUTOHEADER!$AUTOHEADER$ac_delim
-+MAKEINFO!$MAKEINFO$ac_delim
-+AMTAR!$AMTAR$ac_delim
-+install_sh!$install_sh$ac_delim
-+STRIP!$STRIP$ac_delim
-+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-+AWK!$AWK$ac_delim
-+SET_MAKE!$SET_MAKE$ac_delim
-+IJS_MAJOR_VERSION!$IJS_MAJOR_VERSION$ac_delim
-+IJS_MINOR_VERSION!$IJS_MINOR_VERSION$ac_delim
-+IJS_CURRENT_INTERFACE!$IJS_CURRENT_INTERFACE$ac_delim
-+IJS_INTERFACE_AGE!$IJS_INTERFACE_AGE$ac_delim
-+IJS_BINARY_AGE!$IJS_BINARY_AGE$ac_delim
-+IJS_VERSION!$IJS_VERSION$ac_delim
-+LT_RELEASE!$LT_RELEASE$ac_delim
-+LT_CURRENT!$LT_CURRENT$ac_delim
-+LT_REVISION!$LT_REVISION$ac_delim
-+LT_AGE!$LT_AGE$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+DEPDIR!$DEPDIR$ac_delim
-+am__include!$am__include$ac_delim
-+am__quote!$am__quote$ac_delim
-+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-+CCDEPMODE!$CCDEPMODE$ac_delim
-+SED!$SED$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LN_S!$LN_S$ac_delim
-+ECHO!$ECHO$ac_delim
-+AR!$AR$ac_delim
-+RANLIB!$RANLIB$ac_delim
-+CPP!$CPP$ac_delim
-+CXX!$CXX$ac_delim
-+CXXFLAGS!$CXXFLAGS$ac_delim
-+ac_ct_CXX!$ac_ct_CXX$ac_delim
-+CXXDEPMODE!$CXXDEPMODE$ac_delim
-+_ACEOF
-+
-+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-+    break
-+  elif $ac_last_try; then
-+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+   { (exit 1); exit 1; }; }
-+  else
-+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+  fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+  ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+  cat >conf$$subs.sed <<_ACEOF
-+CXXCPP!$CXXCPP$ac_delim
-+F77!$F77$ac_delim
-+FFLAGS!$FFLAGS$ac_delim
-+ac_ct_F77!$ac_ct_F77$ac_delim
-+LIBTOOL!$LIBTOOL$ac_delim
-+LIBTOOL_DEPS!$LIBTOOL_DEPS$ac_delim
-+DB2PS!$DB2PS$ac_delim
-+PS2PDF!$PS2PDF$ac_delim
-+SYSDEPS_WINDOWS_TRUE!$SYSDEPS_WINDOWS_TRUE$ac_delim
-+SYSDEPS_WINDOWS_FALSE!$SYSDEPS_WINDOWS_FALSE$ac_delim
-+IJS_CFLAGS!$IJS_CFLAGS$ac_delim
-+IJS_LIBS!$IJS_LIBS$ac_delim
-+IJS_DEPLIBS!$IJS_DEPLIBS$ac_delim
-+ijs_cflags!$ijs_cflags$ac_delim
-+ijs_libs!$ijs_libs$ac_delim
-+INCLUDES!$INCLUDES$ac_delim
-+LIBIJS_LIBS!$LIBIJS_LIBS$ac_delim
-+LIBOBJS!$LIBOBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 19; then
-+    break
-+  elif $ac_last_try; then
-+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+   { (exit 1); exit 1; }; }
-+  else
-+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+  fi
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+  ac_eof=`expr $ac_eof + 1`
-+fi
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-+_ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[	 ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[	 ]*$//
-+}'
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in  :F $CONFIG_FILES      :C $CONFIG_COMMANDS
-+do
-+  case $ac_tag in
-+  :[FHLC]) ac_mode=$ac_tag; continue;;
-+  esac
-+  case $ac_mode$ac_tag in
-+  :[FHL]*:*);;
-+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+   { (exit 1); exit 1; }; };;
-+  :[FH]-) ac_tag=-:-;;
-+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+  esac
-+  ac_save_IFS=$IFS
-+  IFS=:
-+  set x $ac_tag
-+  IFS=$ac_save_IFS
-+  shift
-+  ac_file=$1
-+  shift
-+
-+  case $ac_mode in
-+  :L) ac_source=$1;;
-+  :[FH])
-+    ac_file_inputs=
-+    for ac_f
-+    do
-+      case $ac_f in
-+      -) ac_f="$tmp/stdin";;
-+      *) # Look for the file first in the build tree, then in the source tree
-+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-+	 # because $ac_f cannot contain `:'.
-+	 test -f "$ac_f" ||
-+	   case $ac_f in
-+	   [\\/$]*) false;;
-+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+	   esac ||
-+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+   { (exit 1); exit 1; }; };;
-+      esac
-+      ac_file_inputs="$ac_file_inputs $ac_f"
-+    done
-+
-+    # Let's still pretend it is `configure' which instantiates (i.e., don't
-+    # use $as_me), people would be surprised to read:
-+    #    /* config.h.  Generated by config.status.  */
-+    configure_input="Generated from "`IFS=:
-+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+    if test x"$ac_file" != x-; then
-+      configure_input="$ac_file.  $configure_input"
-+      { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+    fi
-+
-+    case $ac_tag in
-+    *:-:* | *:-) cat >"$tmp/stdin";;
-+    esac
-+    ;;
-+  esac
-+
-+  ac_dir=`$as_dirname -- "$ac_file" ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$ac_file" : 'X\(//\)[^/]' \| \
-+	 X"$ac_file" : 'X\(//\)$' \| \
-+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$ac_file" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  { as_dir="$ac_dir"
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+   { (exit 1); exit 1; }; }; }
-+  ac_builddir=.
-+
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
-+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+  # A ".." for each directory in $ac_dir_suffix.
-+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+  case $ac_top_builddir_sub in
-+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+  esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-+
-+case $srcdir in
-+  .)  # We are building in place.
-+    ac_srcdir=.
-+    ac_top_srcdir=$ac_top_builddir_sub
-+    ac_abs_top_srcdir=$ac_pwd ;;
-+  [\\/]* | ?:[\\/]* )  # Absolute name.
-+    ac_srcdir=$srcdir$ac_dir_suffix;
-+    ac_top_srcdir=$srcdir
-+    ac_abs_top_srcdir=$srcdir ;;
-+  *) # Relative name.
-+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+    ac_top_srcdir=$ac_top_build_prefix$srcdir
-+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-+esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-+
-+
-+  case $ac_mode in
-+  :F)
-+  #
-+  # CONFIG_FILE
-+  #
-+
-+  case $INSTALL in
-+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-+  esac
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+  p
-+  q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+  ac_datarootdir_hack='
-+  s&@datadir@&$datadir&g
-+  s&@docdir@&$docdir&g
-+  s&@infodir@&$infodir&g
-+  s&@localedir@&$localedir&g
-+  s&@mandir@&$mandir&g
-+    s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
-+  sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+s&@INSTALL@&$ac_INSTALL&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined.  Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined.  Please make sure it is defined." >&2;}
-+
-+  rm -f "$tmp/stdin"
-+  case $ac_file in
-+  -) cat "$tmp/out"; rm -f "$tmp/out";;
-+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+  esac
-+ ;;
-+
-+
-+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+echo "$as_me: executing $ac_file commands" >&6;}
-+ ;;
-+  esac
-+
-+
-+  case $ac_file$ac_mode in
-+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-+  # Strip MF so we end up with the name of the file.
-+  mf=`echo "$mf" | sed -e 's/:.*$//'`
-+  # Check whether this is an Automake generated Makefile or not.
-+  # We used to match only the files named `Makefile.in', but
-+  # some people rename them; so instead we look at the file content.
-+  # Grep'ing the first line is not enough: some people post-process
-+  # each Makefile.in and add a new line on top of each file to say so.
-+  # So let's grep whole file.
-+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-+    dirpart=`$as_dirname -- "$mf" ||
-+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$mf" : 'X\(//\)[^/]' \| \
-+	 X"$mf" : 'X\(//\)$' \| \
-+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$mf" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+  else
-+    continue
-+  fi
-+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
-+  # Extract the definition of DEP_FILES from the Makefile without
-+  # running `make'.
-+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-+  test -z "$DEPDIR" && continue
-+  # When using ansi2knr, U may be empty or an underscore; expand it
-+  U=`sed -n -e '/^U = / s///p' < "$mf"`
-+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-+  # We invoke sed twice because it is the simplest approach to
-+  # changing $(DEPDIR) to its actual value in the expansion.
-+  for file in `sed -n -e '
-+    /^DEP_FILES = .*\\\\$/ {
-+      s/^DEP_FILES = //
-+      :loop
-+	s/\\\\$//
-+	p
-+	n
-+	/\\\\$/ b loop
-+      p
-+    }
-+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-+    # Make sure the directory exists.
-+    test -f "$dirpart/$file" && continue
-+    fdir=`$as_dirname -- "$file" ||
-+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$file" : 'X\(//\)[^/]' \| \
-+	 X"$file" : 'X\(//\)$' \| \
-+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$file" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+    { as_dir=$dirpart/$fdir
-+  case $as_dir in #(
-+  -*) as_dir=./$as_dir;;
-+  esac
-+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-+    as_dirs=
-+    while :; do
-+      case $as_dir in #(
-+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+      *) as_qdir=$as_dir;;
-+      esac
-+      as_dirs="'$as_qdir' $as_dirs"
-+      as_dir=`$as_dirname -- "$as_dir" ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+	 X"$as_dir" : 'X\(//\)[^/]' \| \
-+	 X"$as_dir" : 'X\(//\)$' \| \
-+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-+echo X"$as_dir" |
-+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)[^/].*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\/\)$/{
-+	    s//\1/
-+	    q
-+	  }
-+	  /^X\(\/\).*/{
-+	    s//\1/
-+	    q
-+	  }
-+	  s/.*/./; q'`
-+      test -d "$as_dir" && break
-+    done
-+    test -z "$as_dirs" || eval "mkdir $as_dirs"
-+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+   { (exit 1); exit 1; }; }; }
-+    # echo "creating $dirpart/$file"
-+    echo '# dummy' > "$dirpart/$file"
-+  done
-+done
-+ ;;
-+    "ijs-config":F) chmod +x ijs-config ;;
-+
-+  esac
-+done # for ac_tag
-+
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
-+chmod +x $CONFIG_STATUS
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded.  So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status.  When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+  ac_cs_success=:
-+  ac_config_status_args=
-+  test "$silent" = yes &&
-+    ac_config_status_args="$ac_config_status_args --quiet"
-+  exec 5>/dev/null
-+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+  exec 5>>config.log
-+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+  # would make configure fail if this is the last instruction.
-+  $ac_cs_success || { (exit 1); exit 1; }
-+fi
-+