- Reduce dependencies by using ijs distribution from linuxprinting.org. This

  fixes `make release' with NOPORTS.

Submitted by:	KATO Tsuguru <tkato432 at yahoo.com>

6 files changed, 86 insertions, 88 deletions

diff --git a/print/ghostscript-gpl/Makefile b/print/ghostscript-gpl/Makefile
index 2df5199962a0..32af8c10a535 100644
--- a/print/ghostscript-gpl/Makefile
+++ b/print/ghostscript-gpl/Makefile
@@ -11,20 +11,20 @@ PORTREVISION=	${GS_REVISION}
 PORTEPOCH=	${GS_EPOCH}
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
+		http://www.linuxprinting.org/ijs/download/:ijs_srcs \
 		http://www.humblesoft.com/pub/:epag \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs
 MASTER_SITE_SUBDIR=	ghostscript/:gs_srcs
 PKGNAMESUFFIX=	-gpl
 DISTFILES=	${GS_SRCS}:gs_srcs \
+		${IJS_SRCS}:ijs_srcs \
 		${EPAG_SRCS}:epag
 DIST_SUBDIR=	ghostscript
-EXTRACT_ONLY=	${GS_SRCS}
+EXTRACT_ONLY=	${GS_SRCS} ${IJS_SRCS}
 
 MAINTAINER=	ports@FreeBSD.org
 COMMENT=	GPL Postscript interpreter
 
-BUILD_DEPENDS=	${LOCALBASE}/share/automake-1.10/install-sh:${PORTSDIR}/devel/automake110 \
-		${LOCALBASE}/bin/libtool:${PORTSDIR}/devel/libtool15
 LIB_DEPENDS=	jpeg.9:${PORTSDIR}/graphics/jpeg \
 		png.5:${PORTSDIR}/graphics/png
 RUN_DEPENDS=	${LOCALBASE}/share/ghostscript/fonts/a010013l.pfb:${PORTSDIR}/print/gsfonts
@@ -121,6 +121,7 @@ PLIST_SUB+=	SHLIB="@comment "
 .endif
 
 GS_SRCS=	${DISTNAME}${EXTRACT_SUFX}
+IJS_SRCS=	ijs-0.35${EXTRACT_SUFX}
 CIDFONTDIR=	${PREFIX}/share/ghostscript/${GS_VERSION}/Resource
 
 # Additional Drivers:
@@ -143,31 +144,26 @@ PLIST_SUB+=	JPN="@comment "
 .endif
 
 .SILENT:
+
 pre-everything::
-	${ECHO_MSG} ${MSG_PAPERSIZE}
+	@${ECHO_MSG} ${MSG_PAPERSIZE}
 
 post-extract:
-	${ECHO_MSG} ">>> in post-extract ..."
-.for _FILES in config.guess config.sub ltmain.sh
-	(cd ${WRKSRC}/ijs; ${RM} -f ${_FILES}; \
-	 ${LN} -s ${LOCALBASE}/share/libtool/${_FILES})
-.endfor
-.for _FILES in install-sh missing
-	(cd ${WRKSRC}/ijs; ${RM} -f ${_FILES}; \
-	 ${LN} -s ${LOCALBASE}/share/automake-1.10/${_FILES})
-.endfor
+	@${ECHO_MSG} ">>> in post-extract ..."
+	${RM} -fr ${WRKSRC}/ijs
+	${LN} -sf ../ijs-0.35 ${WRKSRC}/ijs
 
 # ** 3rd party driver **
 # Note: don't forget to add those devices in scripts/configure,
 # which update unix-gcc.mak to build gs with these new devices!
 #
 # for EPAG driver
-	${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
+	@${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS}
 	${LN} -sf ${EPAG_NAME} ${WRKSRC}/${EPAG}
 # for Japanese fonts
 .if defined(WITH_JPNFONTS)
-	${ECHO_MSG} ">>>   extracting ${JPN_SRCS} ..."
+	@${ECHO_MSG} ">>>   extracting ${JPN_SRCS} ..."
 	${TAR} -C ${WRKSRC}/Resource -xypof ${DISTDIR}/${DIST_SUBDIR}/${JPN_SRCS}
 .endif
 
@@ -184,25 +180,25 @@ post-patch:
 # here we apply the modifications necessary to build the 3rd party drivers
 # advantage: you see unmodified makefiles after a pure make extract
 pre-configure:
-	${ECHO_MSG} ">>> in pre-configure ..."
+	@${ECHO_MSG} ">>> in pre-configure ..."
 # for EPAG driver
-	${ECHO_MSG} ">>>   adding EPAG driver to contrib.mak ..."
+	@${ECHO_MSG} ">>>   adding EPAG driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/epag.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 
 post-configure:
-	${ECHO_MSG} ">>> in post-configure ..."
+	@${ECHO_MSG} ">>> in post-configure ..."
 	cd ${WRKSRC}/jasper ; \
 		${SETENV} ${MAKE_ENV} ${SH} ./configure --prefix=${PREFIX}
 	cd ${WRKSRC}/ijs ; \
-		${SETENV} ${MAKE_ENV} ${SH} ./autogen.sh
+		${SETENV} ${MAKE_ENV} ${SH} ./configure --prefix=${PREFIX}
 
 pre-build:
-	${ECHO_MSG} ">>> in pre-build ..."
-	${ECHO_MSG} ">>>   creating directories for compilation ..."
+	@${ECHO_MSG} ">>> in pre-build ..."
+	@${ECHO_MSG} ">>>   creating directories for compilation ..."
 	${MKDIR} ${WRKSRC}/obj
 	${MKDIR} ${WRKSRC}/bin
-	${ECHO_MSG} ">>>   creating symlinks for EPAG ..."
+	@${ECHO_MSG} ">>>   creating symlinks for EPAG ..."
 .for i in gdevepag.c
 	${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src
 .endfor
@@ -219,27 +215,27 @@ pre-build:
 
 post-build:
 # for PCL3 driver
-	${ECHO_MSG} ">>>   building PCL3 utility ..."
+	@${ECHO_MSG} ">>>   building PCL3 utility ..."
 	cd ${WRKSRC} ; \
 		${CC} ${CFLAGS} -I./obj -I./soobj -I./src \
 		-I./contrib/pcl3/eprn -o bin/pcl3opts \
 		contrib/pcl3/src/pcl3opts.c contrib/pcl3/src/pclscan.c \
 		contrib/pcl3/eprn/mediasize.c contrib/pcl3/src/pclsize.c
 # for EPAG driver
-	${ECHO_MSG} ">>>   building EPAG utility ..."
+	@${ECHO_MSG} ">>>   building EPAG utility ..."
 	cd ${WRKSRC}/${EPAG_NAME} ; \
 		${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
 
 pre-su-install:
-	${ECHO_MSG} ">>> in pre-install ..."
-	${ECHO_MSG} ">>>   creating ghostscript destdir ..."
+	@${ECHO_MSG} ">>> in pre-install ..."
+	@${ECHO_MSG} ">>>   creating ghostscript destdir ..."
 	${MKDIR} ${DATADIR}
 	${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}
 
 post-install:
-	${ECHO_MSG} ">>> in post-install ..."
+	@${ECHO_MSG} ">>> in post-install ..."
 	${LN} -s -f ${LOCALBASE}/share/fonts/CIDFont ${CIDFONTDIR}/CIDFont
-	${ECHO_MSG} ">>>   stripping gs ..."
+	@${ECHO_MSG} ">>>   stripping gs ..."
 .if defined(WITH_SHLIB)
 	${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx
 	${LN} -sf gsc ${PREFIX}/bin/gs
@@ -247,16 +243,16 @@ post-install:
 	${STRIP_CMD} ${PREFIX}/bin/gs
 .endif
 # for PCL3 driver
-	${ECHO_MSG} ">>>   installing PCL3 utility in bindir ..."
+	@${ECHO_MSG} ">>>   installing PCL3 utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/bin/pcl3opts ${PREFIX}/bin
-	${ECHO_MSG} ">>>   installing PCL3 manpages ..."
+	@${ECHO_MSG} ">>>   installing PCL3 manpages ..."
 .for i in gs-pcl3.1 pcl3opts.1
 	${INSTALL_MAN} ${WRKSRC}/contrib/pcl3/doc/${i} ${MANPREFIX}/man/man1
 .endfor
 # other pcl3 stuff, which might be interesting for runtime
-	${ECHO_MSG} ">>>   creating PCL3 destdir ..."
+	@${ECHO_MSG} ">>>   creating PCL3 destdir ..."
 	${MKDIR} ${DATADIR}/${GS_VERSION}/pcl3
-	${ECHO_MSG} ">>>   installing files in PCL3 destdir ..."
+	@${ECHO_MSG} ">>>   installing files in PCL3 destdir ..."
 .for i in NEWS BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \
 	ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \
 	ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \
@@ -266,16 +262,16 @@ post-install:
 		${DATADIR}/${GS_VERSION}/pcl3
 .endfor
 # for DMPRT driver
-	${ECHO_MSG} ">>>   installing DMPRT resources ..."
+	@${ECHO_MSG} ">>>   installing DMPRT resources ..."
 .for i in dmp_init.ps dmp_site.ps escp_24.src
 	${INSTALL_DATA} ${WRKSRC}/contrib/japanese/${i} \
 		${DATADIR}/${GS_VERSION}/lib
 .endfor
 # for EPAG driver
-	${ECHO_MSG} ">>>   installing EPAG utility in bindir ..."
+	@${ECHO_MSG} ">>>   installing EPAG utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin
 # contributed UPP driver
-	${ECHO_MSG} ">>> installing contributed UPP profiles ..."
+	@${ECHO_MSG} ">>> installing contributed UPP profiles ..."
 	${INSTALL_DATA} ${WRKSRC}/contrib/uniprint/*.upp \
 		${DATADIR}/${GS_VERSION}/lib
 .for i in lqx70ch.upp lqx70cl.upp lqx70cm.upp
@@ -284,7 +280,7 @@ post-install:
 .endfor
 # for Japanese fonts
 .if defined(WITH_JPNFONTS)
-	${ECHO_MSG} ">>>   installing Japanese font resources ..."
+	@${ECHO_MSG} ">>>   installing Japanese font resources ..."
 	${INSTALL_DATA} ${WRKSRC}/Resource/Font/* \
 		${DATADIR}/${GS_VERSION}/Resource/Font/
 .endif
@@ -292,7 +288,7 @@ post-install:
 # now NOPORTDOCS dependend stuff
 #
 .if !defined(NOPORTDOCS)
-	${ECHO_MSG} ">>> installing PORTDOC stuff ..."
+	@${ECHO_MSG} ">>> installing PORTDOC stuff ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/japanese
 	${INSTALL_DATA} ${WRKSRC}/contrib/japanese/doc/* \
 		${DOCSDIR}/${GS_VERSION}/japanese
@@ -317,14 +313,14 @@ post-install:
 	${INSTALL_DATA} ${WRKSRC}/contrib/md2k_md5k/* \
 		${DOCSDIR}/${GS_VERSION}/md2k_md5k
 # for PCL3 driver
-	${ECHO_MSG} ">>>   installing PCL3 docs ..."
+	@${ECHO_MSG} ">>>   installing PCL3 docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/pcl3
 .for i in NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html
 	${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \
 		${DOCSDIR}/${GS_VERSION}/pcl3
 .endfor
 # for EPAG driver
-	${ECHO_MSG} ">>>   installing EPAG docs ..."
+	@${ECHO_MSG} ">>>   installing EPAG docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG}
 .for i in ert.txt gdevepag.txt ChangeLog
 	${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \
@@ -335,15 +331,15 @@ post-install:
 		${DOCSDIR}/${GS_VERSION}/${EPAG}
 .endfor
 .endif
-	${ECHO_MSG} "> post-installation tasks completed."
+	@${ECHO_MSG} "> post-installation tasks completed."
 	@${ECHO_MSG}
 	@${CAT} ${PKGMESSAGE}
 	@${ECHO_MSG}
 
 .if defined(WITH_FT_BRIDGE)
-	${ECHO_MSG} " *** Configure FAPIfontmap and FAPIcidfmap accordingly"
-	${ECHO_MSG} " *** in ${DATADIR}/${GS_VERSION}/lib"
-	${ECHO_MSG} " *** to use FreeType fonts."
+	@${ECHO_MSG} " *** Configure FAPIfontmap and FAPIcidfmap accordingly"
+	@${ECHO_MSG} " *** in ${DATADIR}/${GS_VERSION}/lib"
+	@${ECHO_MSG} " *** to use FreeType fonts."
 	@${ECHO_MSG}
 .endif
 
diff --git a/print/ghostscript-gpl/Makefile.inc b/print/ghostscript-gpl/Makefile.inc
index 4b02a4f47441..25f98344187a 100644
--- a/print/ghostscript-gpl/Makefile.inc
+++ b/print/ghostscript-gpl/Makefile.inc
@@ -1,5 +1,5 @@
 # $FreeBSD$
 
 GS_VERSION=	8.61
-GS_REVISION=	2
+GS_REVISION=	3
 GS_EPOCH=	0
diff --git a/print/ghostscript-gpl/distinfo b/print/ghostscript-gpl/distinfo
index 80f3ca706514..22e95a8ecd68 100644
--- a/print/ghostscript-gpl/distinfo
+++ b/print/ghostscript-gpl/distinfo
@@ -1,6 +1,9 @@
 MD5 (ghostscript/ghostscript-8.61.tar.bz2) = abff0506cd249cba3ad862d8fe4f6474
 SHA256 (ghostscript/ghostscript-8.61.tar.bz2) = 8c3f62da38688c02442f9b94ac42c6ecefb01141c8319393e8216d8422f7aa33
 SIZE (ghostscript/ghostscript-8.61.tar.bz2) = 13244754
+MD5 (ghostscript/ijs-0.35.tar.bz2) = 896fdcb7a01c586ba6eb81398ea3f6e9
+SHA256 (ghostscript/ijs-0.35.tar.bz2) = 11a5f5084488c480f3ff5a24d64d7147bb64272bf60a0ba51330a56c5b50cab9
+SIZE (ghostscript/ijs-0.35.tar.bz2) = 257476
 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
 SHA256 (ghostscript/epag-3.09.tar.gz) = ad10eca44c781a5851d5a8993dcd95b2e2b99392cbf2c8372a5a658f3b991b3b
 SIZE (ghostscript/epag-3.09.tar.gz) = 12858
diff --git a/print/ghostscript8/Makefile b/print/ghostscript8/Makefile
index 2df5199962a0..32af8c10a535 100644
--- a/print/ghostscript8/Makefile
+++ b/print/ghostscript8/Makefile
@@ -11,20 +11,20 @@ PORTREVISION=	${GS_REVISION}
 PORTEPOCH=	${GS_EPOCH}
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
+		http://www.linuxprinting.org/ijs/download/:ijs_srcs \
 		http://www.humblesoft.com/pub/:epag \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs
 MASTER_SITE_SUBDIR=	ghostscript/:gs_srcs
 PKGNAMESUFFIX=	-gpl
 DISTFILES=	${GS_SRCS}:gs_srcs \
+		${IJS_SRCS}:ijs_srcs \
 		${EPAG_SRCS}:epag
 DIST_SUBDIR=	ghostscript
-EXTRACT_ONLY=	${GS_SRCS}
+EXTRACT_ONLY=	${GS_SRCS} ${IJS_SRCS}
 
 MAINTAINER=	ports@FreeBSD.org
 COMMENT=	GPL Postscript interpreter
 
-BUILD_DEPENDS=	${LOCALBASE}/share/automake-1.10/install-sh:${PORTSDIR}/devel/automake110 \
-		${LOCALBASE}/bin/libtool:${PORTSDIR}/devel/libtool15
 LIB_DEPENDS=	jpeg.9:${PORTSDIR}/graphics/jpeg \
 		png.5:${PORTSDIR}/graphics/png
 RUN_DEPENDS=	${LOCALBASE}/share/ghostscript/fonts/a010013l.pfb:${PORTSDIR}/print/gsfonts
@@ -121,6 +121,7 @@ PLIST_SUB+=	SHLIB="@comment "
 .endif
 
 GS_SRCS=	${DISTNAME}${EXTRACT_SUFX}
+IJS_SRCS=	ijs-0.35${EXTRACT_SUFX}
 CIDFONTDIR=	${PREFIX}/share/ghostscript/${GS_VERSION}/Resource
 
 # Additional Drivers:
@@ -143,31 +144,26 @@ PLIST_SUB+=	JPN="@comment "
 .endif
 
 .SILENT:
+
 pre-everything::
-	${ECHO_MSG} ${MSG_PAPERSIZE}
+	@${ECHO_MSG} ${MSG_PAPERSIZE}
 
 post-extract:
-	${ECHO_MSG} ">>> in post-extract ..."
-.for _FILES in config.guess config.sub ltmain.sh
-	(cd ${WRKSRC}/ijs; ${RM} -f ${_FILES}; \
-	 ${LN} -s ${LOCALBASE}/share/libtool/${_FILES})
-.endfor
-.for _FILES in install-sh missing
-	(cd ${WRKSRC}/ijs; ${RM} -f ${_FILES}; \
-	 ${LN} -s ${LOCALBASE}/share/automake-1.10/${_FILES})
-.endfor
+	@${ECHO_MSG} ">>> in post-extract ..."
+	${RM} -fr ${WRKSRC}/ijs
+	${LN} -sf ../ijs-0.35 ${WRKSRC}/ijs
 
 # ** 3rd party driver **
 # Note: don't forget to add those devices in scripts/configure,
 # which update unix-gcc.mak to build gs with these new devices!
 #
 # for EPAG driver
-	${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
+	@${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS}
 	${LN} -sf ${EPAG_NAME} ${WRKSRC}/${EPAG}
 # for Japanese fonts
 .if defined(WITH_JPNFONTS)
-	${ECHO_MSG} ">>>   extracting ${JPN_SRCS} ..."
+	@${ECHO_MSG} ">>>   extracting ${JPN_SRCS} ..."
 	${TAR} -C ${WRKSRC}/Resource -xypof ${DISTDIR}/${DIST_SUBDIR}/${JPN_SRCS}
 .endif
 
@@ -184,25 +180,25 @@ post-patch:
 # here we apply the modifications necessary to build the 3rd party drivers
 # advantage: you see unmodified makefiles after a pure make extract
 pre-configure:
-	${ECHO_MSG} ">>> in pre-configure ..."
+	@${ECHO_MSG} ">>> in pre-configure ..."
 # for EPAG driver
-	${ECHO_MSG} ">>>   adding EPAG driver to contrib.mak ..."
+	@${ECHO_MSG} ">>>   adding EPAG driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/epag.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 
 post-configure:
-	${ECHO_MSG} ">>> in post-configure ..."
+	@${ECHO_MSG} ">>> in post-configure ..."
 	cd ${WRKSRC}/jasper ; \
 		${SETENV} ${MAKE_ENV} ${SH} ./configure --prefix=${PREFIX}
 	cd ${WRKSRC}/ijs ; \
-		${SETENV} ${MAKE_ENV} ${SH} ./autogen.sh
+		${SETENV} ${MAKE_ENV} ${SH} ./configure --prefix=${PREFIX}
 
 pre-build:
-	${ECHO_MSG} ">>> in pre-build ..."
-	${ECHO_MSG} ">>>   creating directories for compilation ..."
+	@${ECHO_MSG} ">>> in pre-build ..."
+	@${ECHO_MSG} ">>>   creating directories for compilation ..."
 	${MKDIR} ${WRKSRC}/obj
 	${MKDIR} ${WRKSRC}/bin
-	${ECHO_MSG} ">>>   creating symlinks for EPAG ..."
+	@${ECHO_MSG} ">>>   creating symlinks for EPAG ..."
 .for i in gdevepag.c
 	${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src
 .endfor
@@ -219,27 +215,27 @@ pre-build:
 
 post-build:
 # for PCL3 driver
-	${ECHO_MSG} ">>>   building PCL3 utility ..."
+	@${ECHO_MSG} ">>>   building PCL3 utility ..."
 	cd ${WRKSRC} ; \
 		${CC} ${CFLAGS} -I./obj -I./soobj -I./src \
 		-I./contrib/pcl3/eprn -o bin/pcl3opts \
 		contrib/pcl3/src/pcl3opts.c contrib/pcl3/src/pclscan.c \
 		contrib/pcl3/eprn/mediasize.c contrib/pcl3/src/pclsize.c
 # for EPAG driver
-	${ECHO_MSG} ">>>   building EPAG utility ..."
+	@${ECHO_MSG} ">>>   building EPAG utility ..."
 	cd ${WRKSRC}/${EPAG_NAME} ; \
 		${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
 
 pre-su-install:
-	${ECHO_MSG} ">>> in pre-install ..."
-	${ECHO_MSG} ">>>   creating ghostscript destdir ..."
+	@${ECHO_MSG} ">>> in pre-install ..."
+	@${ECHO_MSG} ">>>   creating ghostscript destdir ..."
 	${MKDIR} ${DATADIR}
 	${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}
 
 post-install:
-	${ECHO_MSG} ">>> in post-install ..."
+	@${ECHO_MSG} ">>> in post-install ..."
 	${LN} -s -f ${LOCALBASE}/share/fonts/CIDFont ${CIDFONTDIR}/CIDFont
-	${ECHO_MSG} ">>>   stripping gs ..."
+	@${ECHO_MSG} ">>>   stripping gs ..."
 .if defined(WITH_SHLIB)
 	${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx
 	${LN} -sf gsc ${PREFIX}/bin/gs
@@ -247,16 +243,16 @@ post-install:
 	${STRIP_CMD} ${PREFIX}/bin/gs
 .endif
 # for PCL3 driver
-	${ECHO_MSG} ">>>   installing PCL3 utility in bindir ..."
+	@${ECHO_MSG} ">>>   installing PCL3 utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/bin/pcl3opts ${PREFIX}/bin
-	${ECHO_MSG} ">>>   installing PCL3 manpages ..."
+	@${ECHO_MSG} ">>>   installing PCL3 manpages ..."
 .for i in gs-pcl3.1 pcl3opts.1
 	${INSTALL_MAN} ${WRKSRC}/contrib/pcl3/doc/${i} ${MANPREFIX}/man/man1
 .endfor
 # other pcl3 stuff, which might be interesting for runtime
-	${ECHO_MSG} ">>>   creating PCL3 destdir ..."
+	@${ECHO_MSG} ">>>   creating PCL3 destdir ..."
 	${MKDIR} ${DATADIR}/${GS_VERSION}/pcl3
-	${ECHO_MSG} ">>>   installing files in PCL3 destdir ..."
+	@${ECHO_MSG} ">>>   installing files in PCL3 destdir ..."
 .for i in NEWS BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \
 	ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \
 	ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \
@@ -266,16 +262,16 @@ post-install:
 		${DATADIR}/${GS_VERSION}/pcl3
 .endfor
 # for DMPRT driver
-	${ECHO_MSG} ">>>   installing DMPRT resources ..."
+	@${ECHO_MSG} ">>>   installing DMPRT resources ..."
 .for i in dmp_init.ps dmp_site.ps escp_24.src
 	${INSTALL_DATA} ${WRKSRC}/contrib/japanese/${i} \
 		${DATADIR}/${GS_VERSION}/lib
 .endfor
 # for EPAG driver
-	${ECHO_MSG} ">>>   installing EPAG utility in bindir ..."
+	@${ECHO_MSG} ">>>   installing EPAG utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin
 # contributed UPP driver
-	${ECHO_MSG} ">>> installing contributed UPP profiles ..."
+	@${ECHO_MSG} ">>> installing contributed UPP profiles ..."
 	${INSTALL_DATA} ${WRKSRC}/contrib/uniprint/*.upp \
 		${DATADIR}/${GS_VERSION}/lib
 .for i in lqx70ch.upp lqx70cl.upp lqx70cm.upp
@@ -284,7 +280,7 @@ post-install:
 .endfor
 # for Japanese fonts
 .if defined(WITH_JPNFONTS)
-	${ECHO_MSG} ">>>   installing Japanese font resources ..."
+	@${ECHO_MSG} ">>>   installing Japanese font resources ..."
 	${INSTALL_DATA} ${WRKSRC}/Resource/Font/* \
 		${DATADIR}/${GS_VERSION}/Resource/Font/
 .endif
@@ -292,7 +288,7 @@ post-install:
 # now NOPORTDOCS dependend stuff
 #
 .if !defined(NOPORTDOCS)
-	${ECHO_MSG} ">>> installing PORTDOC stuff ..."
+	@${ECHO_MSG} ">>> installing PORTDOC stuff ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/japanese
 	${INSTALL_DATA} ${WRKSRC}/contrib/japanese/doc/* \
 		${DOCSDIR}/${GS_VERSION}/japanese
@@ -317,14 +313,14 @@ post-install:
 	${INSTALL_DATA} ${WRKSRC}/contrib/md2k_md5k/* \
 		${DOCSDIR}/${GS_VERSION}/md2k_md5k
 # for PCL3 driver
-	${ECHO_MSG} ">>>   installing PCL3 docs ..."
+	@${ECHO_MSG} ">>>   installing PCL3 docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/pcl3
 .for i in NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html
 	${INSTALL_DATA} ${WRKSRC}/contrib/pcl3/${i} \
 		${DOCSDIR}/${GS_VERSION}/pcl3
 .endfor
 # for EPAG driver
-	${ECHO_MSG} ">>>   installing EPAG docs ..."
+	@${ECHO_MSG} ">>>   installing EPAG docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG}
 .for i in ert.txt gdevepag.txt ChangeLog
 	${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \
@@ -335,15 +331,15 @@ post-install:
 		${DOCSDIR}/${GS_VERSION}/${EPAG}
 .endfor
 .endif
-	${ECHO_MSG} "> post-installation tasks completed."
+	@${ECHO_MSG} "> post-installation tasks completed."
 	@${ECHO_MSG}
 	@${CAT} ${PKGMESSAGE}
 	@${ECHO_MSG}
 
 .if defined(WITH_FT_BRIDGE)
-	${ECHO_MSG} " *** Configure FAPIfontmap and FAPIcidfmap accordingly"
-	${ECHO_MSG} " *** in ${DATADIR}/${GS_VERSION}/lib"
-	${ECHO_MSG} " *** to use FreeType fonts."
+	@${ECHO_MSG} " *** Configure FAPIfontmap and FAPIcidfmap accordingly"
+	@${ECHO_MSG} " *** in ${DATADIR}/${GS_VERSION}/lib"
+	@${ECHO_MSG} " *** to use FreeType fonts."
 	@${ECHO_MSG}
 .endif
 
diff --git a/print/ghostscript8/Makefile.inc b/print/ghostscript8/Makefile.inc
index 4b02a4f47441..25f98344187a 100644
--- a/print/ghostscript8/Makefile.inc
+++ b/print/ghostscript8/Makefile.inc
@@ -1,5 +1,5 @@
 # $FreeBSD$
 
 GS_VERSION=	8.61
-GS_REVISION=	2
+GS_REVISION=	3
 GS_EPOCH=	0
diff --git a/print/ghostscript8/distinfo b/print/ghostscript8/distinfo
index 80f3ca706514..22e95a8ecd68 100644
--- a/print/ghostscript8/distinfo
+++ b/print/ghostscript8/distinfo
@@ -1,6 +1,9 @@
 MD5 (ghostscript/ghostscript-8.61.tar.bz2) = abff0506cd249cba3ad862d8fe4f6474
 SHA256 (ghostscript/ghostscript-8.61.tar.bz2) = 8c3f62da38688c02442f9b94ac42c6ecefb01141c8319393e8216d8422f7aa33
 SIZE (ghostscript/ghostscript-8.61.tar.bz2) = 13244754
+MD5 (ghostscript/ijs-0.35.tar.bz2) = 896fdcb7a01c586ba6eb81398ea3f6e9
+SHA256 (ghostscript/ijs-0.35.tar.bz2) = 11a5f5084488c480f3ff5a24d64d7147bb64272bf60a0ba51330a56c5b50cab9
+SIZE (ghostscript/ijs-0.35.tar.bz2) = 257476
 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
 SHA256 (ghostscript/epag-3.09.tar.gz) = ad10eca44c781a5851d5a8993dcd95b2e2b99392cbf2c8372a5a658f3b991b3b
 SIZE (ghostscript/epag-3.09.tar.gz) = 12858