- Update to 8.60. The contributed drivers made by gs-esp are now merged in,

  but still missing improved CJKV font handling functions.

PR:		ports/115395
Submitted by:	KATO Tsuguru <tkato432 at yahoo.com>

30 files changed, 198 insertions, 1888 deletions

diff --git a/print/ghostscript-gpl/Makefile b/print/ghostscript-gpl/Makefile
index fc8a8a1dd52a..f85ad73e142a 100644
--- a/print/ghostscript-gpl/Makefile
+++ b/print/ghostscript-gpl/Makefile
@@ -12,23 +12,14 @@ PORTEPOCH=	${GS_EPOCH}
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
 		http://www.humblesoft.com/pub/:epag \
-		http://www.openprinting.org/download/printing/esp-gpl-ghostscript-merge/:contrib \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs
 MASTER_SITE_SUBDIR=	ghostscript/:gs_srcs
 PKGNAMESUFFIX=	-gpl
 DISTFILES=	${GS_SRCS}:gs_srcs \
-		${EPAG_SRCS}:epag \
-		${DISTNAME}-contrib-drivers.tar.gz:contrib
+		${EPAG_SRCS}:epag
 DIST_SUBDIR=	ghostscript
 EXTRACT_ONLY=	${GS_SRCS}
 
-PATCH_SITES=	http://www.openprinting.org/download/printing/esp-gpl-ghostscript-merge/
-PATCHFILES+=	${DISTNAME}-bjc880j-lips2p-lips4-lips4v.patch
-PATCHFILES+=	${DISTNAME}-ijs-krgb.patch
-PATCHFILES+=	${DISTNAME}-ljet4pjl-lj4dithp-dj505j-picty180.patch
-PATCHFILES+=	${DISTNAME}-pxl-duplex.patch
-PATCH_DIST_STRIP=	-p1
-
 MAINTAINER=	ports@FreeBSD.org
 COMMENT=	GPL Postscript interpreter
 
@@ -40,7 +31,8 @@ CONFLICTS=	ghostscript-afpl* ghostscript-gnu*
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 MAKE_ENV=	CC="${CC}" CXX="${CXX}" CFLAGS_STANDARD="${CFLAGS}" \
-		XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}"
+		XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}" \
+		EXTRALIBS="${EXTRALIBS}"
 PLIST_SUB=	GS_VERSION="${GS_VERSION}" \
 		CIDFONTDIR="${CIDFONTDIR}"
 
@@ -60,7 +52,7 @@ MLINKS=		gslp.1 gsbj.1 \
 		ps2pdf.1 ps2pdf13.1 \
 		ps2ps.1 eps2eps.1
 
-XCFLAGS=	-DUPD_SIGNAL=0 -DHAVE_HYPOT=1 ${PTHREAD_CFLAGS}
+XCFLAGS=	${PTHREAD_CFLAGS}
 XLDFLAGS=	${PTHREAD_LIBS}
 
 MSG_PAPERSIZE=	"NOTE: Type \"make A4=yes\" to use A4 paper size by default."
@@ -83,7 +75,13 @@ LIB_DEPENDS+=	vga.1:${PORTSDIR}/graphics/svgalib
 
 .if defined(WITH_ICONV)
 USE_ICONV=	yes
-XLDFLAGS+=	-liconv
+EXTRALIBS+=	-liconv
+.endif
+
+.if defined(WITH_FONTCONFIG)
+LIB_DEPENDS+=	fontconfig.1:${PORTSDIR}/x11-fonts/fontconfig
+XCFLAGS+=	-DHAVE_FONTCONFIG=1
+EXTRALIBS+=	-lfontconfig
 .endif
 
 .if defined(WITH_FT_BRIDGE)
@@ -92,8 +90,14 @@ MAKE_ENV+=	FT_BRIDGE=1 FT_ROOT="${WRKSRC}/freetype" FT_LIB_EXT=".a"
 .endif
 
 .if defined(WITH_SHLIB)
-.undef WITHOUT_X11
+.if defined(WITHOUT_X11)
+MAKE_ENV+=	SOC_LOADER="dxmainc.c"
+.else
 USE_GNOME=	gtk20
+MAKE_ENV+=	SOC_LOADER="dxmain.c" \
+		SOC_CFLAGS="`pkg-config --cflags gtk+-2.0`" \
+		SOC_LIBS="`pkg-config --libs gtk+-2.0`"
+.endif
 ALL_TARGET=	so pcl3opts
 INSTALL_TARGET=	soinstall
 USE_LDCONFIG=	yes
@@ -125,7 +129,6 @@ pre-everything::
 
 post-extract:
 	${ECHO_MSG} ">>> in post-extract ..."
-	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${DISTNAME}-contrib-drivers.tar.gz
 # ** 3rd party driver **
 # Note: don't forget to add those devices in scripts/configure,
 # which update unix-gcc.mak to build gs with these new devices!
diff --git a/print/ghostscript-gpl/Makefile.inc b/print/ghostscript-gpl/Makefile.inc
index 456c87aceec1..8eab31986b07 100644
--- a/print/ghostscript-gpl/Makefile.inc
+++ b/print/ghostscript-gpl/Makefile.inc
@@ -1,5 +1,5 @@
 # $FreeBSD$
 
-GS_VERSION=	8.57
-GS_REVISION=	1
+GS_VERSION=	8.60
+GS_REVISION=	0
 GS_EPOCH=	0
diff --git a/print/ghostscript-gpl/distinfo b/print/ghostscript-gpl/distinfo
index 995b3e867376..4f448d32a14f 100644
--- a/print/ghostscript-gpl/distinfo
+++ b/print/ghostscript-gpl/distinfo
@@ -1,30 +1,6 @@
-MD5 (ghostscript/ghostscript-8.57.tar.bz2) = cc8368863fe6b666aaf13beb83ba300a
-SHA256 (ghostscript/ghostscript-8.57.tar.bz2) = 29c4cbf8bd95a14046d72eba7edbec60ffd25c37b3b3427f7c8ad5f81636ab15
-SIZE (ghostscript/ghostscript-8.57.tar.bz2) = 11934408
-MD5 (ghostscript/canon-lips4-1.0.0-651.tgz) = 3105272a9351ea632416b53367e2f38a
-SHA256 (ghostscript/canon-lips4-1.0.0-651.tgz) = e11d11fa9d8645e4102a36d293cdf42498b5fbecc966d0bd104c5aa951c08cae
-SIZE (ghostscript/canon-lips4-1.0.0-651.tgz) = 38835
+MD5 (ghostscript/ghostscript-8.60.tar.bz2) = 89fc0a90e67caf151a9d6855200c68ca
+SHA256 (ghostscript/ghostscript-8.60.tar.bz2) = f615f936e38d2e7a6da588de6655f2b23207c0a906df1960b1d7e83c3241982a
+SIZE (ghostscript/ghostscript-8.60.tar.bz2) = 12942029
 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
 SHA256 (ghostscript/epag-3.09.tar.gz) = ad10eca44c781a5851d5a8993dcd95b2e2b99392cbf2c8372a5a658f3b991b3b
 SIZE (ghostscript/epag-3.09.tar.gz) = 12858
-MD5 (ghostscript/eplaser-3.1.4-705.tgz) = 94246b034af171b4336d90198e9f4bd8
-SHA256 (ghostscript/eplaser-3.1.4-705.tgz) = ed1ccdf6ec613eb5e028786ad59cb3060f00c2ffa8ca5792bfd219514dc69f42
-SIZE (ghostscript/eplaser-3.1.4-705.tgz) = 44523
-MD5 (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 17fccbbe61d1e44d553dca756740ee9c
-SHA256 (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 872c45a35cc4fb904f6b836c99326ffd3dcaa9fec30d0da5c051c0ce6db06e20
-SIZE (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 848539
-MD5 (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 792e25f0571160e7fb009f8288ad8844
-SHA256 (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 9ad4032da8a6200fb3669c285b5ba9495760837617926b1b15cf46f9d8bbf7f8
-SIZE (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 1414
-MD5 (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 9367bf6f6b7a82a3182ba9f74fb8fa21
-SHA256 (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 8aaceb0dd31565880bc5b1318c4da040ba20c2118405807bdf0ed230a62db01b
-SIZE (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 23397
-MD5 (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 4cb50b272deadc1581a6ae38c6cc201f
-SHA256 (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 110282a6fe223d55a837346d3e597ca308f2f6b70dc568777d33cdb1b5c76ddd
-SIZE (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 5149
-MD5 (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 8c1c051edf17c31e24184b96460605e6
-SHA256 (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 61995ad4124e0830a85e8873508bcd19ff0c5ab0b0369187c6a0ca2e761c7afa
-SIZE (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 16168
-MD5 (ghostscript/ghostscript-8.57-pxl-duplex.patch) = 8f5e640454ed1f4f7b5db46857929703
-SHA256 (ghostscript/ghostscript-8.57-pxl-duplex.patch) = e6ce02b2d2e7a093b4050a36fc9aaccfad24ddaa2494d242e8b2cc13bca165b9
-SIZE (ghostscript/ghostscript-8.57-pxl-duplex.patch) = 7796
diff --git a/print/ghostscript-gpl/files/patch-contrib__gdevhl12.c b/print/ghostscript-gpl/files/patch-contrib__gdevhl12.c
deleted file mode 100644
index 64ef936f0975..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__gdevhl12.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- contrib/gdevhl12.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/gdevhl12.c	Tue May 15 16:49:03 2007
-@@ -474,7 +474,7 @@
- 	    continue;
- #if 1
- 	/* XXX - please report if you ever see this, then change to #if 0 */
--	fprintf(stderr,
-+	dprintf1(
- 		"hl1250: compression failed (y=%u), doing 1200x300 dpi\n",
- 		band + y);
- #endif
diff --git a/print/ghostscript-gpl/files/patch-contrib__japanese__gdevfmlbp.c b/print/ghostscript-gpl/files/patch-contrib__japanese__gdevfmlbp.c
deleted file mode 100644
index 8bd0d2b123e5..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__japanese__gdevfmlbp.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- contrib/japanese/gdevfmlbp.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/japanese/gdevfmlbp.c	Tue May 15 16:49:03 2007
-@@ -121,7 +121,7 @@
-      height_inches >=  9.2 ? PAPER_SIZE_B5 :
-      height_inches >=  7.6 ? PAPER_SIZE_A5 : PAPER_SIZE_HAGAKI), landscape);
- #ifdef	FMLBP_DEBUG
--  fprintf(stderr, "w=%d(%f) x h=%d(%f) -> %s\n",
-+  dprintf5("w=%d(%f) x h=%d(%f) -> %s\n",
- 	  dev->width, width_inches, dev->height, height_inches, paper);
- #endif/*FMLBP_DEBUG*/
-   return paper;
diff --git a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__eprnparm.c b/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__eprnparm.c
deleted file mode 100644
index 5d0443b4ff75..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__eprnparm.c
+++ /dev/null
@@ -1,238 +0,0 @@
---- contrib/pcl3/eprn/eprnparm.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/eprn/eprnparm.c	Tue May 15 02:02:42 2007
-@@ -146,7 +146,7 @@
-   /* First we construct a properly NUL-terminated string */
-   s = (char *) malloc(in_value->size + 1);
-   if (s == NULL) {
--    fprintf(stderr, ERRPREF
-+    eprintf1(ERRPREF
-       "Memory allocation failure in eprn_get_int(): %s.\n",
-       strerror(errno));
-     return_error(gs_error_VMerror);
-@@ -352,8 +352,7 @@
-   'eprn->media_overrides' should be NULL.
- 
-   The function returns zero on success and a non-zero ghostscript error value
--  otherwise. In the latter case, an error message will have been issued on
--  stderr.
-+  otherwise. In the latter case, an error message will have been issued.
- 
- ******************************************************************************/
- 
-@@ -379,7 +378,7 @@
- 
-   /* Open the file */
-   if ((f = fopen(eprn->media_file, "r")) == NULL) {
--    fprintf(stderr, "%s" ERRPREF "Error opening the media configuration file\n"
-+    eprintf5("%s" ERRPREF "Error opening the media configuration file\n"
-       "%s    `%s'\n%s  for reading: %s.\n",
-       epref, epref, eprn->media_file, epref, strerror(errno));
-     return_error(gs_error_invalidfileaccess);
-@@ -395,7 +394,7 @@
- 
-     /* Check for buffer overflow */
-     if ((s = strchr(buffer, '\n')) == NULL && fgetc(f) != EOF) {
--      fprintf(stderr, "%s" ERRPREF "Exceeding line length %d in "
-+      eprintf5("%s" ERRPREF "Exceeding line length %d in "
- 	  "media configuration file\n%s  %s, line %d.\n",
- 	epref, BUFFER_SIZE - 2 /* '\n'+'\0' */, epref, eprn->media_file, line);
-       cleanup();
-@@ -453,7 +452,7 @@
-       new_list = (eprn_PageDescription *)
- 	realloc(list, (read+1)*sizeof(eprn_PageDescription));
-       if (new_list == NULL) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "Memory allocation failure in eprn_read_media_data(): %s.\n",
- 	  epref, strerror(errno));
- 	cleanup();
-@@ -477,14 +476,14 @@
-     {
-       ms_MediaCode code = ms_find_code_from_name(s, eprn->flag_desc);
-       if (code == ms_none) {
--	fprintf(stderr, "%s" ERRPREF "Unknown media name (%s) in "
-+	eprintf5("%s" ERRPREF "Unknown media name (%s) in "
- 	    "media configuration file\n%s  %s, line %d.\n",
- 	  epref, s, epref, eprn->media_file, line);
- 	cleanup();
- 	return_error(gs_error_rangecheck);
-       }
-       if (code & MS_ROTATED_FLAG) {
--	fprintf(stderr, "%s" ERRPREF "Invalid substring \"" MS_ROTATED_STRING
-+	eprintf5("%s" ERRPREF "Invalid substring \"" MS_ROTATED_STRING
- 	    "\" in media name (%s)\n"
- 	  "%s  in media configuration file %s, line %d.\n",
- 	  epref, s, epref, eprn->media_file, line);
-@@ -499,7 +498,7 @@
- 	  &current->bottom, &current->right, &current->top, &chars_read) != 4 ||
- 	t[chars_read] != '\0') {
-       if (*t != '\0') *(t-1) = ' ';	/* remove NUL after media name */
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf5("%s" ERRPREF
- 	"Syntax error in media configuration file %s, line %d:\n%s    %s\n",
- 	epref, eprn->media_file, line, epref, buffer);
-       cleanup();
-@@ -509,7 +508,7 @@
-     /* Check for sign */
-     if (current->left < 0 || current->bottom < 0 || current->right < 0 ||
- 	current->top < 0) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf4("%s" ERRPREF
- 	"Ghostscript does not support negative margins (line %d in the\n"
- 	"%s  media configuration file %s).\n",
- 	epref, line, epref, eprn->media_file);
-@@ -530,14 +529,14 @@
-        The user might not notice the reason without help, hence we check. */
-     if (ms_without_flags(current->code) == ms_CustomPageSize &&
- 	eprn->cap->custom == NULL)
--      fprintf(stderr, "%s" WARNPREF "The media configuration file %s\n"
-+      eprintf6("%s" WARNPREF "The media configuration file %s\n"
- 	"%s    contains a custom page size entry in line %d, "
- 	  "but custom page sizes\n"
- 	"%s    are not supported by the %s.\n",
- 	wpref, eprn->media_file, wpref, line, wpref, eprn->cap->name);
-   }
-   if (ferror(f)) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf2("%s" ERRPREF
-       "Unidentified system error while reading `%s'.\n",
-       epref, eprn->media_file);
-     cleanup();
-@@ -547,7 +546,7 @@
- 
-   /* Was the file empty? */
-   if (read == 0) {
--    fprintf(stderr, "%s" ERRPREF "The media configuration file %s\n"
-+    eprintf3("%s" ERRPREF "The media configuration file %s\n"
-       "%s  does not contain any media information.\n",
-       epref, eprn->media_file, epref);
-     return_error(gs_error_rangecheck);
-@@ -557,7 +556,7 @@
-   eprn->media_overrides = (eprn_PageDescription *) gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), read + 1,
-     sizeof(eprn_PageDescription), "eprn_read_media_data");
-   if (eprn->media_overrides == NULL) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf1("%s" ERRPREF
-       "Memory allocation failure from gs_malloc() in eprn_read_media_data().\n",
-       epref);
-     free(list);
-@@ -585,8 +584,7 @@
-   from the specified media configuration file.
- 
-   The return code will be zero an success and a ghostscript error code
--  otherwise. In the latter case, an error message will have been issued on
--  stderr.
-+  otherwise. In the latter case, an error message will have been issued.
- 
-   The 'length' may be positive in which case it denotes the length of the
-   string 'media_file' or zero in which case the string is assumed to be
-@@ -629,7 +627,7 @@
-     eprn->media_file = (char *)gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), length + 1, sizeof(char),
-       "eprn_set_media_data");
-     if (eprn->media_file == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc() in "
- 	"eprn_set_media_data().\n",
- 	epref);
-@@ -928,9 +926,9 @@
-     rc = eprn_get_int(&string_value, eprn_colour_model_list, &temp);	\
-     if (rc != 0) {							\
-       if (rc != gs_error_VMerror) {					\
--	fprintf(stderr, "%s" ERRPREF "Unknown colour model: `", epref);	\
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr); \
--	fputs("'.\n", stderr);						\
-+	eprintf1("%s" ERRPREF "Unknown colour model: `", epref);	\
-+	errwrite(string_value.data, sizeof(char)*string_value.size);	\
-+	eprintf("'.\n");						\
-       }									\
-       last_error = rc;							\
-       param_signal_error(plist, pname, last_error);			\
-@@ -994,7 +992,7 @@
-       eprn->black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for BlackLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1011,7 +1009,7 @@
-       eprn->non_black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for CMYLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1025,8 +1023,8 @@
-     bool temp;
-     if ((rc = param_read_bool(plist, "CUPSAccounting", &temp)) == 0) {
-       if (eprn->CUPS_accounting && !temp)
--	fputs(CUPS_WARNPREF WARNPREF
--	  "Attempt to set CUPSAccounting from true to false.\n", stderr);
-+	eprintf(CUPS_WARNPREF WARNPREF
-+	  "Attempt to set CUPSAccounting from true to false.\n");
-       else eprn->CUPS_accounting = temp;
-     }
-     else if (rc < 0) last_error = rc;
-@@ -1042,10 +1040,10 @@
-       eprn->intensity_rendering = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid method for IntensityRendering: `",
-+      eprintf1("%s" ERRPREF "Invalid method for IntensityRendering: `",
-         epref);
--      fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--      fputs("'.\n", stderr);
-+      errwrite(string_value.data, sizeof(char)*string_value.size);
-+      eprintf("'.\n");
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -1066,7 +1064,7 @@
-       eprn->default_orientation = temp;
-     }
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "LeadingEdge may only have values 0 to 3, not %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1111,7 +1109,7 @@
-     /* Current (up to at least gs 6.50) ghostscript versions do not accept
-        negative MediaPosition values. */
-     if (eprn->media_position < 0)
--      fprintf(stderr, "%s" WARNPREF
-+      eprintf3("%s" WARNPREF
- 	"Ghostscript does not accept negative values (%d) for the\n"
- 	  "%s    `MediaPosition' parameter.\n",
- 	wpref, eprn->media_position, wpref);
-@@ -1145,7 +1143,7 @@
-       eprn->pagecount_file = (char *)gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), string_value.size + 1,
- 	sizeof(char), "eprn_put_params");
-       if (eprn->pagecount_file == NULL) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf1( "%s" ERRPREF
- 	  "Memory allocation failure from gs_malloc() in eprn_put_params().\n",
- 	  epref);
- 	last_error = gs_error_VMerror;
-@@ -1167,7 +1165,7 @@
-       eprn->non_black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for RGBLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1187,7 +1185,7 @@
-   */
-   if ((rc = param_read_int(plist, (pname = "BitsPerPixel"), &temp)) == 0) {
-     if (temp != dev->color_info.depth) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf3("%s" ERRPREF
- 	"Attempt to set `BitsPerPixel' to a value (%d)\n"
- 	"%s  other than the one selected by the driver.\n",
- 	epref, temp, epref);
diff --git a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.c b/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.c
deleted file mode 100644
index 696feccb9a52..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.c
+++ /dev/null
@@ -1,237 +0,0 @@
---- contrib/pcl3/eprn/gdeveprn.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/eprn/gdeveprn.c	Tue May 15 01:34:15 2007
-@@ -95,6 +95,7 @@
- #ifdef EPRN_TRACE
- #include "gdebug.h"
- #endif	/* EPRN_TRACE */
-+#include "gxstdio.h"
- 
- /* Special headers for this device */
- #ifndef EPRN_NO_PAGECOUNTFILE
-@@ -143,8 +144,8 @@
-       "! eprn_get_initial_matrix(): code is still ms_none.\n");
- #endif
-     if (eprn_set_page_layout(dev) != 0)
--      fputs("  Processing can't be stopped at this point although this error "
--	"occurred.\n", stderr);
-+      eprintf("  Processing can't be stopped at this point although this error "
-+	"occurred.\n");
-       /* The current function has a signature without the ability to signal
- 	 an error condition. */
-   }
-@@ -303,17 +304,17 @@
- 
-   Function: print_flags
- 
--  Print a textual description of 'flags' on 'f'.
-+  Print a textual description of 'flags' to the error stream.
- 
- ******************************************************************************/
- 
--static void print_flags(FILE *f, ms_MediaCode flags, const ms_Flag *user_flags)
-+static void print_flags(ms_MediaCode flags, const ms_Flag *user_flags)
- {
-   /* Non-standard flags first */
-   if (user_flags != NULL) {
-     while (user_flags->code != ms_none) {
-       if (user_flags->code & flags) {
--	fputs(user_flags->name, f);
-+	errprintf(user_flags->name);
- 	flags &= ~user_flags->code;
-       }
-       user_flags++;
-@@ -321,17 +322,17 @@
-   }
- 
-   /* Standard substrings */
--  if (flags & MS_SMALL_FLAG) fputs(MS_SMALL_STRING, f);
--  if (flags & MS_BIG_FLAG  ) fputs(MS_BIG_STRING,   f);
--  if (flags & MS_EXTRA_FLAG) fputs(MS_EXTRA_STRING, f);
-+  if (flags & MS_SMALL_FLAG) eprintf(MS_SMALL_STRING);
-+  if (flags & MS_BIG_FLAG  ) eprintf(MS_BIG_STRING);
-+  if (flags & MS_EXTRA_FLAG) eprintf(MS_EXTRA_STRING);
-   flags &= ~(MS_SMALL_FLAG | MS_BIG_FLAG | MS_EXTRA_FLAG);
- 
-   /* Completeness check */
-   if (flags & ~MS_TRANSVERSE_FLAG)
--    fprintf(f, "0x%04X", (unsigned int)(flags & ~MS_TRANSVERSE_FLAG));
-+    eprintf1("0x%04X", (unsigned int)(flags & ~MS_TRANSVERSE_FLAG));
- 
-   /* Standard qualifier */
--  if (flags & MS_TRANSVERSE_FLAG) fputs("." MS_TRANSVERSE_STRING, f);
-+  if (flags & MS_TRANSVERSE_FLAG) eprintf("." MS_TRANSVERSE_STRING);
- 
-   return;
- }
-@@ -347,37 +348,37 @@
- 
-   If the derived device has set a flag mismatch error reporting function, the
-   call will be passed to that function. Otherwise a general error message is
--  written on 'err'.
-+  written through the graphics library's eprintf().
- 
- ******************************************************************************/
- 
--static void eprn_flag_mismatch(FILE *err, const struct s_eprn_Device *eprn,
-+static void eprn_flag_mismatch(const struct s_eprn_Device *eprn,
-   bool no_match)
- {
--  if (eprn->fmr != NULL) (*eprn->fmr)(err, eprn, no_match);
-+  if (eprn->fmr != NULL) (*eprn->fmr)(eprn, no_match);
-   else {
-     const char *epref = eprn->CUPS_messages? CUPS_ERRPREF: "";
- 
--    fprintf(err, "%s" ERRPREF "The %s does not support ",
-+    eprintf2("%s" ERRPREF "The %s does not support ",
-       epref, eprn->cap->name);
--    if (eprn->desired_flags == 0) fprintf(err, "an empty set of media flags");
-+    if (eprn->desired_flags == 0) eprintf("an empty set of media flags");
-     else {
--      fputs("the \"", err);
--      print_flags(err, eprn->desired_flags, eprn->flag_desc);
--      fputs("\" flag(s)", err);
-+      eprintf("the \"");
-+      print_flags(eprn->desired_flags, eprn->flag_desc);
-+      eprintf("\" flag(s)");
-     }
--    fprintf(err, "\n%s  (ignoring presence or absence of \"", epref);
-+    eprintf1("\n%s  (ignoring presence or absence of \"", epref);
-     {
-       ms_MediaCode optional = MS_TRANSVERSE_FLAG;
-       if (eprn->optional_flags != NULL) {
- 	const ms_MediaCode *of = eprn->optional_flags;
- 	while (*of != ms_none) optional |= *of++;
-       }
--      print_flags(err, optional, eprn->flag_desc);
-+      print_flags(optional, eprn->flag_desc);
-     }
--    fputs("\") for ", err);
--    if (no_match) fputs("any", err); else fputs("this", err);
--    fputs(" page size.\n", err);
-+    eprintf("\") for ");
-+    if (no_match) eprintf("any"); else eprintf("this");
-+    eprintf(" page size.\n");
-   }
- 
-   return;
-@@ -483,7 +484,7 @@
-   the media flags, or the page descriptions have been changed.
- 
-   The function returns zero on success and a non-zero value otherwise.
--  In the latter case, an error message has been issued on stderr. This can only
-+  In the latter case, an error message has been issued. This can only
-   occur if the media size is not supported with the flags requested.
- 
-   On success, the following variables in the device structure are consistent:
-@@ -615,21 +616,21 @@
-     /* No discrete match */
-     if (best_cmatch == NULL) {
-       /* No match at all. */
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf3("%s" ERRPREF
- 	"This document requests a page size of %.0f x %.0f bp.\n",
- 	   epref, dev->MediaSize[0], dev->MediaSize[1]);
-       if (eprn->cap->custom == NULL) {
- 	/* The printer does not support custom page sizes */
- 	if (eprn->media_overrides != NULL)
--	  fprintf(stderr,
-+	  eprintf1(
- 	    "%s  The media configuration file does not contain an entry for "
- 	      " this size.\n", epref);
- 	else
--	  fprintf(stderr, "%s  This size is not supported by the %s.\n",
-+	  eprintf2("%s  This size is not supported by the %s.\n",
- 	    epref, eprn->cap->name);
-       }
-       else
--	fprintf(stderr,
-+	eprintf3(
- 	  "%s  This size is not supported as a discrete size and it exceeds "
- 	    "the\n"
- 	  "%s  custom page size limits for the %s.\n",
-@@ -637,7 +638,7 @@
-       return -1;
-     }
-     if (eprn->media_overrides != NULL && best_cdmatch == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf6("%s" ERRPREF
- 	"This document requests a page size of %.0f x %.0f bp\n"
- 	"%s  but there is no entry for this size in the "
- 	  "media configuration file\n"
-@@ -692,7 +693,7 @@
-   }
-   /* If we've found a match, 'code' is no longer 'ms_none'. */
-   if (eprn->code == ms_none) {
--    eprn_flag_mismatch(stderr, eprn, no_match);
-+    eprn_flag_mismatch(eprn, no_match);
-     return -1;
-   }
- 
-@@ -762,7 +763,7 @@
- 
-       rc = gdev_prn_open((gx_device *)dev);
-       if (rc < 0) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "Failure of gdev_prn_open(), code is %d.\n",
- 	  epref, rc);
- 	return rc;
-@@ -944,13 +945,13 @@
-       &eprn->black_levels, &eprn->non_black_levels) != 0) {
-     gs_param_string str;
- 
--    fprintf(stderr, "%s" ERRPREF "The requested combination of colour model (",
-+    eprintf1("%s" ERRPREF "The requested combination of colour model (",
-       epref);
-     str.size = 0;
-     if (eprn_get_string(eprn->colour_model, eprn_colour_model_list, &str) != 0)
-       assert(0); /* Bug. No harm on NDEBUG because I've just set the size. */
--    fwrite(str.data, str.size, sizeof(str.data[0]), stderr);
--    fprintf(stderr, "),\n"
-+    errwrite(str.data, str.size * sizeof(str.data[0]));
-+    eprintf7("),\n"
-       "%s  resolution (%gx%g ppi) and intensity levels (%d, %d) is\n"
-       "%s  not supported by the %s.\n",
-       epref, device->HWResolution[0], device->HWResolution[1],
-@@ -1022,9 +1023,8 @@
- 	  updating the file. */
-     else {
-       /* pcf_getcount() has issued an error message. */
--      fputs(
--        "  No further attempts will be made to access the page count file.\n",
--	stderr);
-+      eprintf(
-+        "  No further attempts will be made to access the page count file.\n");
-       gs_free(gs_lib_ctx_get_non_gc_memory_t(), eprn->pagecount_file, strlen(eprn->pagecount_file) + 1,
- 	sizeof(char), "eprn_open_device");
-       eprn->pagecount_file = NULL;
-@@ -1060,7 +1060,7 @@
-     }
-   }
-   if (eprn->scan_line.str == NULL) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf1("%s" ERRPREF
-       "Memory allocation failure from gs_malloc() in eprn_open_device().\n",
-       epref);
-     return_error(gs_error_VMerror);
-@@ -1156,7 +1156,7 @@
-       accounting, this seems unfair.
-   */
-   if (rc == 0 && eprn->CUPS_accounting)
--    fprintf(stderr, "PAGE: %ld %d\n", dev->ShowpageCount, num_copies);
-+    eprintf2("PAGE: %ld %d\n", dev->ShowpageCount, num_copies);
-     /* The arguments are the number of the page, starting at 1, and the number
-        of copies of that page. */
- 
-@@ -1166,9 +1166,8 @@
-     assert(num_copies > 0);	/* because of signed/unsigned */
-     if (pcf_inccount(eprn->pagecount_file, num_copies) != 0) {
-       /* pcf_inccount() has issued an error message. */
--      fputs(
--	"  No further attempts will be made to access the page count file.\n",
--	stderr);
-+      eprintf(
-+	"  No further attempts will be made to access the page count file.\n");
-       gs_free(gs_lib_ctx_get_non_gc_memory_t(), eprn->pagecount_file, strlen(eprn->pagecount_file) + 1,
- 	sizeof(char), "eprn_output_page");
-       eprn->pagecount_file = NULL;
diff --git a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.h b/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.h
deleted file mode 100644
index 1da6579effbc..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__pcl3__eprn__gdeveprn.h
+++ /dev/null
@@ -1,22 +0,0 @@
---- contrib/pcl3/eprn/gdeveprn.h.orig	Thu Apr 26 01:33:54 2007
-+++ contrib/pcl3/eprn/gdeveprn.h	Tue May 15 02:03:02 2007
-@@ -396,8 +396,8 @@
- struct s_eprn_Device;
-  /* The preceding statement is needed in order to establish a forward
-     declaration for "struct s_eprn_Device" at file scope. */
--typedef void (*eprn_FlagMismatchReporter)(FILE *f,
--  const struct s_eprn_Device *dev, bool no_match);
-+typedef void (*eprn_FlagMismatchReporter)(const struct s_eprn_Device *dev,
-+		bool no_match);
- /*  A function of this kind will be called if the requested media flags cannot
-     be satisfied by the printer although the size itself is supported for some
-     (unspecified) set of flags. The parameter 'no_match' indicates whether the
-@@ -406,7 +406,7 @@
-     capabilities). The requested set of media selection flags is available in
-     'dev->eprn.desired_flags' and 'dev->eprn.optional_flags' (MS_ROTATED_FLAG
-     will never be set).
--    The function must write an error message on 'f'.
-+    The function must write an error message.
- */
- 
- /*****************************************************************************/
diff --git a/print/ghostscript-gpl/files/patch-contrib__pcl3__src__gdevpcl3.c b/print/ghostscript-gpl/files/patch-contrib__pcl3__src__gdevpcl3.c
deleted file mode 100644
index dd8e850bf6e0..000000000000
--- a/print/ghostscript-gpl/files/patch-contrib__pcl3__src__gdevpcl3.c
+++ /dev/null
@@ -1,314 +0,0 @@
---- contrib/pcl3/src/gdevpcl3.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/src/gdevpcl3.c	Tue May 15 01:48:00 2007
-@@ -338,7 +338,7 @@
-   /* First we construct a properly NUL-terminated string */
-   s = (char *) malloc(in_value->size + 1);
-   if (s == NULL) {
--    fprintf(stderr, ERRPREF
-+    eprintf1(ERRPREF
-       "Memory allocation failure in get_int_for_string(): %s.\n",
-       strerror(errno));
-     return_error(gs_error_VMerror);
-@@ -434,25 +434,25 @@
-   const char *epref = eprn->CUPS_messages? CUPS_ERRPREF: "";
- 
-   if (eprn->desired_flags == 0) {
--    fprintf(stderr,
-+    eprintf2(
-       "%s" ERRPREF "The %s does not support the requested media properties.\n",
-       epref, eprn->cap->name);
-   }
-   else if (eprn->desired_flags == MS_BIG_FLAG) {
--    fprintf(stderr, "%s" ERRPREF "The %s does not support banner printing",
-+    eprintf2("%s" ERRPREF "The %s does not support banner printing",
-       epref, eprn->cap->name);
--    if (!no_match) fputs(" for this size", stderr);
--    fputs(".\n", stderr);
-+    if (!no_match) eprintf(" for this size");
-+    eprintf(".\n");
-   }
-   else if (eprn->desired_flags == PCL_CARD_FLAG) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf2("%s" ERRPREF
-       "The %s does not support a `Card' variant for ",
-       epref, eprn->cap->name);
--    if (no_match) fputs("any", stderr); else fputs("this", stderr);
--    fputs(" size.\n", stderr);
-+    if (no_match) eprintf("any"); else eprintf("this");
-+    eprintf(" size.\n");
-   }
-   else {
--    fprintf(stderr,
-+    eprintf1(
-       "%s" ERRPREF "Banner printing on postcards?? You must be joking!\n",
-       epref);
-   }
-@@ -699,8 +699,8 @@
-   be copied to '*s'.
- 
-   The function returns a negative ghostscript error code on error and zero
--  otherwise. In the former case an error message will have been issued on
--  stderr, using 'epref' as a prefix for the message.
-+  otherwise. In the former case an error message will have been issued, 
-+  using 'epref' as a prefix for the message.
- 
- ******************************************************************************/
- 
-@@ -728,7 +728,7 @@
- 
-     if (s->str == NULL) {
-       s->length = 0;
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc().\n", epref);
-       rc = gs_error_VMerror;
-       param_signal_error(plist, pname, rc);
-@@ -760,8 +760,7 @@
-   copied.
- 
-   The function returns a negative ghostscript error code on error and zero
--  otherwise. In the former case an error message will have been issued on
--  stderr.
-+  otherwise. In the former case an error message will have been issued.
- 
- ******************************************************************************/
- 
-@@ -785,7 +784,7 @@
-       "fetch_cstring");
- 
-     if (*s == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc().\n", epref);
-       rc = gs_error_VMerror;
-       param_signal_error(plist, pname, rc);
-@@ -907,9 +906,9 @@
- 	eprn_init_device((eprn_Device *)dev, &pcl3_printers[dev->printer].desc);
-       }
-       else {
--	fprintf(stderr, "%s" ERRPREF "Unknown subdevice name: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown subdevice name: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-       }
-@@ -925,8 +924,8 @@
-       == 0) {
-     if (temp != pcl_cm_none && temp != pcl_cm_rl && temp != pcl_cm_tiff &&
- 	temp != pcl_cm_delta && temp != pcl_cm_crdr) {
--      fprintf(stderr,
--	"%s" ERRPREF "Unsupported compression method: %d.\n", epref, temp);
-+      eprintf2("%s" ERRPREF "Unsupported compression method: %d.\n",
-+	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -934,7 +933,7 @@
-       if (temp == pcl_cm_crdr && (dev->printer == HPDeskJet ||
- 	  dev->printer == HPDeskJetPlus || dev->printer == HPDJ500)) {
- 	/* This I know to be the case for the DJ 500. The others are guessed. */
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s" ERRPREF "The %s does not support compression method 9.\n",
- 	  epref, dev->eprn.cap->name);
- 	last_error = gs_error_rangecheck;
-@@ -956,7 +955,7 @@
-     if (1 <= temp && temp <= 5 && (dev->printer != HPDJ500C || temp <= 3))
-       requested.depletion = temp;
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid value for depletion: %d.\n",
-+      eprintf2("%s" ERRPREF "Invalid value for depletion: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-@@ -978,7 +977,7 @@
- 	    Hence I'm giving an error message only in those cases where HP
- 	    explicitly states that the printer does not support the command.
- 	  */
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s" ERRPREF "The %s does not support setting a dry time.\n",
- 	  epref, dev->eprn.cap->name);
- 	last_error = gs_error_rangecheck;
-@@ -987,8 +986,8 @@
-       else data->dry_time = temp;
-     }
-     else {
--      fprintf(stderr,
--	"%s" ERRPREF "Invalid value for the dry time: %d.\n", epref, temp);
-+      eprintf2("%s" ERRPREF "Invalid value for the dry time: %d.\n",
-+	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -1008,7 +1007,7 @@
- 	    dev->Duplex_set = 0;	/* force to "null" */
- 	}
- 	else {
--	  fprintf(stderr, "%s" ERRPREF
-+	  eprintf2("%s" ERRPREF
- 	    "You can use a non-trivial value for DuplexCapability\n"
- 	    "%s  only for unspec and unspecold.\n", epref, epref);
- 	  last_error = gs_error_rangecheck;
-@@ -1016,9 +1015,9 @@
- 	}
-       }
-       else {
--	fprintf(stderr, "%s" ERRPREF "Invalid duplex capability: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Invalid duplex capability: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-       }
-@@ -1037,12 +1036,12 @@
-     if ((rc = param_read_bool(plist, (pname = "Duplex"), &temp)) == 0 &&
- 	temp && dev->duplex_capability == Duplex_none) {
-       if (dev->printer == pcl3_generic_new || dev->printer == pcl3_generic_old)
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf3("%s" ERRPREF
-           "The '%s' device does not support duplex printing unless\n"
- 	  "%s  'DuplexCapability' is not 'none'.\n",
- 	  epref, find_subdevice_name(dev->printer), epref);
-       else
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "The %s does not support duplex printing.\n",
- 	  epref, dev->eprn.cap->name);
-       last_error = gs_error_rangecheck;
-@@ -1071,9 +1070,9 @@
-     rc = get_int_for_string(&string_value, media_type_list, &temp);
-     if (rc != 0) {
-       if (rc != gs_error_VMerror) {
--	fprintf(stderr, "%s" ERRPREF "Unknown medium: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown medium: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
-       }
-       last_error = rc;
-       param_signal_error(plist, pname, last_error);
-@@ -1081,7 +1080,7 @@
-     else {
-       new_quality = true;
-       if (temp < 0 || 6 < temp)
--	fprintf(stderr, "%s" WARNPREF "Unknown media type code: %d.\n",
-+	eprintf2("%s" WARNPREF "Unknown media type code: %d.\n",
- 	  wpref, temp);
-       pcl3_set_mediatype(data, temp);
-     }
-@@ -1107,7 +1106,7 @@
-       if (pcl_has_CRD(data->level))
- 	data->level = (temp? pcl_level_3plus_CRD_only: pcl_level_3plus_S68);
-       else if (temp == true) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf1("%s" ERRPREF
- 	  "OnlyCRD may be set only for group-3 devices.\n", epref);
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-@@ -1140,9 +1139,9 @@
-     rc = get_int_for_string(&string_value, print_quality_list, &temp);
-     if (rc != 0) {
-       if (rc != gs_error_VMerror) {
--	fprintf(stderr, "%s" ERRPREF "Unknown print quality: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown print quality: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
-       }
-       last_error = rc;
-       param_signal_error(plist, pname, last_error);
-@@ -1150,7 +1149,7 @@
-     else {
-       new_quality = true;
-       if (temp < -1 || 1 < temp)
--	fprintf(stderr, "%s" WARNPREF "Unknown print quality: %d.\n",
-+	eprintf2("%s" WARNPREF "Unknown print quality: %d.\n",
- 	  wpref, temp);
-       pcl3_set_printquality(data, temp);
-     }
-@@ -1165,7 +1164,7 @@
- 	== 0) {
-     if (0 <= temp && temp <= 2) requested.quality = temp;
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "Invalid value for raster graphics quality: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1186,7 +1185,7 @@
-   if ((rc = param_read_int(plist, (pname = "SendNULs"), &temp)) == 0) {
-     if (data->NULs_to_send >= 0) data->NULs_to_send = temp;
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "Invalid value for SendNULs parameter: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1202,7 +1201,7 @@
-       (rc = param_read_int(plist, pname, &temp)) == 0) {
-     if (0 <= temp && temp <= 2) requested.shingling = temp;
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid value for shingling: %d.\n",
-+      eprintf2("%s" ERRPREF "Invalid value for shingling: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-@@ -1280,7 +1279,7 @@
-   /* Check on rendering parameters */
-   if ((dev->eprn.black_levels > 2 || dev->eprn.non_black_levels > 2) &&
-       dev->file_data.print_quality == -1)
--    fprintf(stderr,
-+    eprintf2(
-       "%s" WARNPREF "More than 2 intensity levels and draft quality\n"
-       "%s    are unlikely to work in combination.\n", wpref, wpref);
- 
-@@ -1311,18 +1310,18 @@
-       */
-       char buffer[50];
- 
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The current configuration for this driver has identified the\n"
- 	"%s  page setup requested by the document as being for `",
- 	epref, epref);
-       if (ms_find_name_from_code(buffer, sizeof(buffer),
--	  dev->eprn.code, flag_description) == 0) fputs(buffer, stderr);
--      else fputs("UNKNOWN", stderr);	/* should never happen */
--      fprintf(stderr, "' (%.0f x %.0f bp).\n"
-+	  dev->eprn.code, flag_description) == 0) eprintf(buffer);
-+      else eprintf("UNKNOWN");	/* should never happen */
-+      eprintf3("' (%.0f x %.0f bp).\n"
- 	"%s  The driver does not know how to do this in PCL.\n",
- 	dev->MediaSize[0], dev->MediaSize[1], epref);
-       if (dev->eprn.media_file != NULL)
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s  You should therefore not include such an entry in the\n"
- 	  "%s  media configuration file.\n", epref, epref);
-       return_error(gs_error_rangecheck);
-@@ -1473,7 +1472,7 @@
-       pcl_cm_is_differential(dev->file_data.compression) &&
- 	rd.previous == NULL) {
-     free(lengths); free(rd.next); free(rd.previous);
--    fprintf(stderr, "%s" ERRPREF "Memory allocation failure from malloc().\n",
-+    eprintf1("%s" ERRPREF "Memory allocation failure from malloc().\n",
-       epref);
-     return_error(gs_error_VMerror);
-   }
-@@ -1514,7 +1513,7 @@
-     free(lengths); free(rd.next); free(rd.previous);
-     for (j = 0; j < 2; j++) free(rd.workspace[j]);
- 
--    fprintf(stderr, "%s" ERRPREF "Memory allocation failure from malloc().\n",
-+    eprintf1("%s" ERRPREF "Memory allocation failure from malloc().\n",
-       epref);
-     return_error(gs_error_VMerror);
-   }
diff --git a/print/ghostscript-gpl/files/patch-lib__ps2epsi.CAN-2004-0967 b/print/ghostscript-gpl/files/patch-lib__ps2epsi.CAN-2004-0967
deleted file mode 100644
index c1b1cbcc3fbe..000000000000
--- a/print/ghostscript-gpl/files/patch-lib__ps2epsi.CAN-2004-0967
+++ /dev/null
@@ -1,19 +0,0 @@
---- lib/ps2epsi.orig	Thu May 25 02:19:27 2006
-+++ lib/ps2epsi	Fri Mar 23 10:55:11 2007
-@@ -5,14 +5,8 @@
- # executable name set in the makefile
- GS_EXECUTABLE=gs
- 
--# try to create a temporary file securely
--tmpdir=/tmp/ps2epsi.$$
--(umask 077 && mkdir $tmpdir)
--if test ! -d $tmpdir; then
--	echo "failed: could not create temporary file"
--	exit 1
--fi
--tmpfile=$tmpdir/ps2epsi$$
-+tmpfile=`mktemp -t ps2epsi.XXXXXX || exit 1`
-+trap "rm -rf $tmpfile" 0 1 2 3 7 13 15
- 
- export outfile
- 
diff --git a/print/ghostscript-gpl/files/patch-lib__pv.sh.CAN-2004-0967 b/print/ghostscript-gpl/files/patch-lib__pv.sh.CAN-2004-0967
deleted file mode 100644
index a37fc43aada9..000000000000
--- a/print/ghostscript-gpl/files/patch-lib__pv.sh.CAN-2004-0967
+++ /dev/null
@@ -1,16 +0,0 @@
---- lib/pv.sh.orig	Mon Nov 28 02:18:26 2005
-+++ lib/pv.sh	Mon Nov 28 02:18:59 2005
-@@ -29,9 +29,10 @@
- PAGE=$1
- shift
- FILE=$1
-+TEMPFILE=`mktemp -t ${FILE}XXXXXX` || exit 1
- shift
--trap "rm -rf $TEMPDIR/$FILE.$$.pv" 0 1 2 15
-+trap "rm -rf $TEMPFILE" 0 1 2 15
- #dvips -D$RESOLUTION -p $PAGE -n 1 $FILE $* -o $FILE.$$.pv
--dvips -p $PAGE -n 1 $FILE $* -o $FILE.$$.pv
--gs $FILE.$$.pv
-+dvips -p $PAGE -n 1 $FILE $* -o $TEMPFILE
-+gs $TEMPFILE
- exit 0
diff --git a/print/ghostscript-gpl/files/patch-src:fapi_ft.c b/print/ghostscript-gpl/files/patch-src:fapi_ft.c
index 52f28daefcf7..d1c936dd64c4 100644
--- a/print/ghostscript-gpl/files/patch-src:fapi_ft.c
+++ b/print/ghostscript-gpl/files/patch-src:fapi_ft.c
@@ -1,16 +1,20 @@
---- src/fapi_ft.c.orig	Mon Mar 13 17:18:19 2006
-+++ src/fapi_ft.c	Sun Mar 18 16:23:21 2007
-@@ -26,11 +26,14 @@
- #include "math_.h"
+--- src/fapi_ft.c.orig	Wed Jul 11 09:26:24 2007
++++ src/fapi_ft.c	Fri Aug 10 02:40:41 2007
+@@ -28,11 +28,14 @@
+ #include "gserror.h"
  
  /* FreeType headers */
 -#include "freetype/freetype.h"
+-#include "freetype/ftincrem.h"
+-#include "freetype/ftglyph.h"
+-#include "freetype/ftoutln.h"
+-#include "freetype/fttrigon.h"
 +#include "ft2build.h"
 +#include FT_FREETYPE_H
- #include "freetype/ftincrem.h"
- #include "freetype/ftglyph.h"
- #include "freetype/ftoutln.h"
- #include "freetype/fttrigon.h"
++#include FT_INCREMENTAL_H
++#include FT_GLYPH_H
++#include FT_OUTLINE_H
++#include FT_TRIGONOMETRY_H
 +#include "gserrors.h"
 +#include "gserror.h"
  
diff --git a/print/ghostscript-gpl/files/patch-src:unix-gcc.mak b/print/ghostscript-gpl/files/patch-src:unix-gcc.mak
index fe6c53b5c5cc..15462223d8b1 100644
--- a/print/ghostscript-gpl/files/patch-src:unix-gcc.mak
+++ b/print/ghostscript-gpl/files/patch-src:unix-gcc.mak
@@ -1,5 +1,5 @@
---- src/unix-gcc.mak.orig	Sat May 12 02:02:29 2007
-+++ src/unix-gcc.mak	Fri May 25 04:03:33 2007
+--- src/unix-gcc.mak.orig	Tue Jul 31 05:13:56 2007
++++ src/unix-gcc.mak	Fri Aug 10 22:01:41 2007
 @@ -21,15 +21,17 @@
  # source, generated intermediate file, and object directories
  # for the graphics library (GL) and the PostScript/PDF interpreter (PS).
@@ -42,7 +42,24 @@
  exec_prefix = $(prefix)
  bindir = $(exec_prefix)/bin
  scriptdir = $(bindir)
-@@ -143,7 +144,7 @@
+@@ -62,6 +63,7 @@
+ datadir = $(prefix)/share
+ gsdir = $(datadir)/ghostscript
+ gsdatadir = $(gsdir)/$(GS_DOT_VERSION)
++gssharedir = $(libdir)/ghostscript/$(GS_DOT_VERSION)
+ 
+ docdir=$(gsdatadir)/doc
+ exdir=$(gsdatadir)/examples
+@@ -108,7 +110,7 @@
+ # -DHAVE_HYPOT
+ #       use the system hypot() call
+ 
+-CAPOPT= -DHAVE_MKSTEMP
++CAPOPT= -DHAVE_MKSTEMP -DHAVE_HYPOT
+ 
+ # Define the name of the executable file.
+ 
+@@ -143,7 +145,7 @@
  # some older JPEG streams that violate the standard. If the JPEG
  # library built from local sources, the patch will be applied.
  
@@ -51,7 +68,7 @@
  JPEG_NAME=jpeg
  
  # Define the directory where the PNG library sources are stored,
-@@ -158,7 +159,7 @@
+@@ -158,7 +160,7 @@
  # what its name is.
  # See gs.mak and Make.htm for more information.
  
@@ -60,7 +77,7 @@
  LIBPNG_NAME=png
  
  # Define the directory where the zlib sources are stored.
-@@ -170,7 +171,7 @@
+@@ -170,7 +172,7 @@
  # what its name is (usually libz, but sometimes libgz).
  # See gs.mak and Make.htm for more information.
  
@@ -69,7 +86,7 @@
  #ZLIB_NAME=gz
  ZLIB_NAME=z
  
-@@ -179,6 +180,14 @@
+@@ -179,6 +181,14 @@
  JBIG2_LIB=jbig2dec
  JBIG2SRCDIR=jbig2dec
  
@@ -84,7 +101,7 @@
  # Define the directory where the icclib source are stored.
  # See icclib.mak for more information
  
-@@ -202,7 +211,7 @@
+@@ -207,7 +217,7 @@
  
  # Define the name of the C compiler.
  
@@ -93,29 +110,30 @@
  
  # Define the name of the linker for the final link step.
  # Normally this is the same as the C compiler.
-@@ -219,9 +228,9 @@
+@@ -224,10 +234,10 @@
  # Define the added flags for standard, debugging, profiling 
  # and shared object builds.
  
 -CFLAGS_STANDARD=-O2
--CFLAGS_DEBUG=-g -O0
--CFLAGS_PROFILE=-pg -O2
 +CFLAGS_STANDARD?=-O2
-+CFLAGS_DEBUG=-g
-+CFLAGS_PROFILE=-pg
- CFLAGS_SO=-fPIC
+ CFLAGS_DEBUG=-g -O0
+ CFLAGS_PROFILE=-pg -O2
+-CFLAGS_SO=-fPIC -shared
++CFLAGS_SO=-fPIC
  
  # Define the other compilation flags.  Add at most one of the following:
-@@ -235,7 +244,7 @@
+ #	-DBSD4_2 for 4.2bsd systems.
+@@ -240,7 +250,8 @@
  # We don't include -ansi, because this gets in the way of the platform-
  #   specific stuff that <math.h> typically needs; nevertheless, we expect
  #   gcc to accept ANSI-style function prototypes and function definitions.
--XCFLAGS=
-+XCFLAGS+=-I${JPXSRCDIR}/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include
+-XCFLAGS=-DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"$(gssharedir)\"
++XCFLAGS+=-DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"$(gssharedir)\"
++XCFLAGS+=-DUPD_SIGNAL=0 -I${JPXSRCDIR}/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include
  
  CFLAGS=$(CFLAGS_STANDARD) $(GCFLAGS) $(XCFLAGS)
  
-@@ -246,7 +255,7 @@
+@@ -251,7 +262,7 @@
  #	-R /usr/local/xxx/lib:/usr/local/lib
  # giving the full path names of the shared library directories.
  # XLDFLAGS can be set from the command line.
@@ -124,7 +142,16 @@
  
  LDFLAGS=$(XLDFLAGS)
  
-@@ -279,7 +288,7 @@
+@@ -262,7 +273,7 @@
+ # Solaris may need -lnsl -lsocket -lposix4.
+ # (Libraries required by individual drivers are handled automatically.)
+ 
+-EXTRALIBS=-rdynamic -ldl
++EXTRALIBS+=-Wl,-export-dynamic
+ 
+ # Define the standard libraries to search at the end of linking.
+ # Most platforms require -lpthread for the POSIX threads library;
+@@ -284,7 +295,7 @@
  # Note that x_.h expects to find the header files in $(XINCLUDE)/X11,
  # not in $(XINCLUDE).
  
@@ -133,7 +160,7 @@
  
  # Define the directory/ies and library names for the X11 library files.
  # XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
-@@ -291,12 +300,12 @@
+@@ -296,12 +307,12 @@
  # Solaris and other SVR4 systems with dynamic linking probably want
  #XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
  # X11R6 (on any platform) may need
@@ -149,7 +176,7 @@
  
  # Define whether this platform has floating point hardware:
  #	FPU_TYPE=2 means floating point is faster than fixed point.
-@@ -314,16 +323,16 @@
+@@ -319,16 +330,16 @@
  
  # If POSIX sync primitives are used, also change the STDLIBS to include
  # the pthread library.
@@ -169,7 +196,16 @@
  #FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev
  # The following is strictly for testing.
  FEATURE_DEVS_ALL=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(PSD)double.dev $(PSD)trapping.dev $(PSD)stocht.dev $(GLD)pipe.dev
-@@ -447,6 +456,9 @@
+@@ -418,7 +429,7 @@
+ DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)xcf.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16m.dev $(DD)bmp32b.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev
+ 
+ # Shared library target to build.
+-GS_SHARED_OBJS=$(GLOBJDIR)/X11.so $(GLOBJDIR)/lvga256.so $(GLOBJDIR)/vgalib.so
++#GS_SHARED_OBJS=$(GLOBJDIR)/X11.so $(GLOBJDIR)/lvga256.so $(GLOBJDIR)/vgalib.so
+ #GS_SHARED_OBJS=$(GLOBJDIR)/X11.so
+ 
+ # ---------------------------- End of options --------------------------- #
+@@ -457,6 +468,9 @@
  include $(GLSRCDIR)/zlib.mak
  include $(GLSRCDIR)/libpng.mak
  include $(GLSRCDIR)/jbig2.mak
@@ -179,7 +215,7 @@
  include $(GLSRCDIR)/icclib.mak
  include $(GLSRCDIR)/ijs.mak
  include $(GLSRCDIR)/devs.mak
-@@ -456,6 +468,7 @@
+@@ -466,6 +480,7 @@
  include $(GLSRCDIR)/unix-dll.mak
  include $(GLSRCDIR)/unix-end.mak
  include $(GLSRCDIR)/unixinst.mak
diff --git a/print/ghostscript-gpl/pkg-plist b/print/ghostscript-gpl/pkg-plist
index e8cb4ee8bad8..e7cce6f79336 100644
--- a/print/ghostscript-gpl/pkg-plist
+++ b/print/ghostscript-gpl/pkg-plist
@@ -350,7 +350,6 @@ bin/wftopfa
 %%DATADIR%%/%%GS_VERSION%%/doc/Issues.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Language.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Lib.htm
-%%DATADIR%%/%%GS_VERSION%%/doc/Maintain.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Make.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/News.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Projects.htm
diff --git a/print/ghostscript-gpl/scripts/configure b/print/ghostscript-gpl/scripts/configure
index b2bf87c60391..2c35fafbb56e 100644
--- a/print/ghostscript-gpl/scripts/configure
+++ b/print/ghostscript-gpl/scripts/configure
@@ -75,6 +75,7 @@ else
 		gdi \
 		jj100 \
 		sj48 t4693d2 t4693d4 t4693d8 tek4696 \
+		xes \
 		bmpmono bmpgray bmp16 bmp256 bmp16m bmp32b bmpsep1 bmpsep8 \
 		ccr \
 		cgmmono cgm8 cgm24 \
@@ -96,7 +97,8 @@ else
 		tiffcrle tiffg3 tiffg32d tiffg4 tiffgray \
 		tiff12nc tiff24nc tiff32nc tiffsep tifflzw tiffpack \
 		bbox \
-		devicen perm spotcmyk
+		devicen perm spotcmyk \
+		imdi wtsimdi wtscmyk
 fi
 
 for i; do
@@ -402,6 +404,9 @@ Have fun with this new configuration style !     -andreas \n\n\
   "devicen"  "DeviceN process color model device" "$status_devicen" \
   "perm"     "DeviceN which permutes color components" "$status_perm" \
   "spotcmyk" "DeviceN with CMYK and spot color support" "$status_spotcmyk" \
+  "imdi"     "IMDI color converting device" "$status_imdi" \
+  "wtsimdi"  "WTS halftoning device" "$status_wtsimdi" \
+  "wtscmyk"  "WTS halftoning CMYK device" "$status_wtscmyk" \
 2> $tempfile
 
 	retval=$?
diff --git a/print/ghostscript8/Makefile b/print/ghostscript8/Makefile
index fc8a8a1dd52a..f85ad73e142a 100644
--- a/print/ghostscript8/Makefile
+++ b/print/ghostscript8/Makefile
@@ -12,23 +12,14 @@ PORTEPOCH=	${GS_EPOCH}
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs/} \
 		http://www.humblesoft.com/pub/:epag \
-		http://www.openprinting.org/download/printing/esp-gpl-ghostscript-merge/:contrib \
 		ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs${GS_VERSION:S/.//}/:gs_srcs
 MASTER_SITE_SUBDIR=	ghostscript/:gs_srcs
 PKGNAMESUFFIX=	-gpl
 DISTFILES=	${GS_SRCS}:gs_srcs \
-		${EPAG_SRCS}:epag \
-		${DISTNAME}-contrib-drivers.tar.gz:contrib
+		${EPAG_SRCS}:epag
 DIST_SUBDIR=	ghostscript
 EXTRACT_ONLY=	${GS_SRCS}
 
-PATCH_SITES=	http://www.openprinting.org/download/printing/esp-gpl-ghostscript-merge/
-PATCHFILES+=	${DISTNAME}-bjc880j-lips2p-lips4-lips4v.patch
-PATCHFILES+=	${DISTNAME}-ijs-krgb.patch
-PATCHFILES+=	${DISTNAME}-ljet4pjl-lj4dithp-dj505j-picty180.patch
-PATCHFILES+=	${DISTNAME}-pxl-duplex.patch
-PATCH_DIST_STRIP=	-p1
-
 MAINTAINER=	ports@FreeBSD.org
 COMMENT=	GPL Postscript interpreter
 
@@ -40,7 +31,8 @@ CONFLICTS=	ghostscript-afpl* ghostscript-gnu*
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 MAKE_ENV=	CC="${CC}" CXX="${CXX}" CFLAGS_STANDARD="${CFLAGS}" \
-		XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}"
+		XCFLAGS="${XCFLAGS}" XLDFLAGS="${XLDFLAGS}" \
+		EXTRALIBS="${EXTRALIBS}"
 PLIST_SUB=	GS_VERSION="${GS_VERSION}" \
 		CIDFONTDIR="${CIDFONTDIR}"
 
@@ -60,7 +52,7 @@ MLINKS=		gslp.1 gsbj.1 \
 		ps2pdf.1 ps2pdf13.1 \
 		ps2ps.1 eps2eps.1
 
-XCFLAGS=	-DUPD_SIGNAL=0 -DHAVE_HYPOT=1 ${PTHREAD_CFLAGS}
+XCFLAGS=	${PTHREAD_CFLAGS}
 XLDFLAGS=	${PTHREAD_LIBS}
 
 MSG_PAPERSIZE=	"NOTE: Type \"make A4=yes\" to use A4 paper size by default."
@@ -83,7 +75,13 @@ LIB_DEPENDS+=	vga.1:${PORTSDIR}/graphics/svgalib
 
 .if defined(WITH_ICONV)
 USE_ICONV=	yes
-XLDFLAGS+=	-liconv
+EXTRALIBS+=	-liconv
+.endif
+
+.if defined(WITH_FONTCONFIG)
+LIB_DEPENDS+=	fontconfig.1:${PORTSDIR}/x11-fonts/fontconfig
+XCFLAGS+=	-DHAVE_FONTCONFIG=1
+EXTRALIBS+=	-lfontconfig
 .endif
 
 .if defined(WITH_FT_BRIDGE)
@@ -92,8 +90,14 @@ MAKE_ENV+=	FT_BRIDGE=1 FT_ROOT="${WRKSRC}/freetype" FT_LIB_EXT=".a"
 .endif
 
 .if defined(WITH_SHLIB)
-.undef WITHOUT_X11
+.if defined(WITHOUT_X11)
+MAKE_ENV+=	SOC_LOADER="dxmainc.c"
+.else
 USE_GNOME=	gtk20
+MAKE_ENV+=	SOC_LOADER="dxmain.c" \
+		SOC_CFLAGS="`pkg-config --cflags gtk+-2.0`" \
+		SOC_LIBS="`pkg-config --libs gtk+-2.0`"
+.endif
 ALL_TARGET=	so pcl3opts
 INSTALL_TARGET=	soinstall
 USE_LDCONFIG=	yes
@@ -125,7 +129,6 @@ pre-everything::
 
 post-extract:
 	${ECHO_MSG} ">>> in post-extract ..."
-	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${DISTNAME}-contrib-drivers.tar.gz
 # ** 3rd party driver **
 # Note: don't forget to add those devices in scripts/configure,
 # which update unix-gcc.mak to build gs with these new devices!
diff --git a/print/ghostscript8/Makefile.inc b/print/ghostscript8/Makefile.inc
index 456c87aceec1..8eab31986b07 100644
--- a/print/ghostscript8/Makefile.inc
+++ b/print/ghostscript8/Makefile.inc
@@ -1,5 +1,5 @@
 # $FreeBSD$
 
-GS_VERSION=	8.57
-GS_REVISION=	1
+GS_VERSION=	8.60
+GS_REVISION=	0
 GS_EPOCH=	0
diff --git a/print/ghostscript8/distinfo b/print/ghostscript8/distinfo
index 995b3e867376..4f448d32a14f 100644
--- a/print/ghostscript8/distinfo
+++ b/print/ghostscript8/distinfo
@@ -1,30 +1,6 @@
-MD5 (ghostscript/ghostscript-8.57.tar.bz2) = cc8368863fe6b666aaf13beb83ba300a
-SHA256 (ghostscript/ghostscript-8.57.tar.bz2) = 29c4cbf8bd95a14046d72eba7edbec60ffd25c37b3b3427f7c8ad5f81636ab15
-SIZE (ghostscript/ghostscript-8.57.tar.bz2) = 11934408
-MD5 (ghostscript/canon-lips4-1.0.0-651.tgz) = 3105272a9351ea632416b53367e2f38a
-SHA256 (ghostscript/canon-lips4-1.0.0-651.tgz) = e11d11fa9d8645e4102a36d293cdf42498b5fbecc966d0bd104c5aa951c08cae
-SIZE (ghostscript/canon-lips4-1.0.0-651.tgz) = 38835
+MD5 (ghostscript/ghostscript-8.60.tar.bz2) = 89fc0a90e67caf151a9d6855200c68ca
+SHA256 (ghostscript/ghostscript-8.60.tar.bz2) = f615f936e38d2e7a6da588de6655f2b23207c0a906df1960b1d7e83c3241982a
+SIZE (ghostscript/ghostscript-8.60.tar.bz2) = 12942029
 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
 SHA256 (ghostscript/epag-3.09.tar.gz) = ad10eca44c781a5851d5a8993dcd95b2e2b99392cbf2c8372a5a658f3b991b3b
 SIZE (ghostscript/epag-3.09.tar.gz) = 12858
-MD5 (ghostscript/eplaser-3.1.4-705.tgz) = 94246b034af171b4336d90198e9f4bd8
-SHA256 (ghostscript/eplaser-3.1.4-705.tgz) = ed1ccdf6ec613eb5e028786ad59cb3060f00c2ffa8ca5792bfd219514dc69f42
-SIZE (ghostscript/eplaser-3.1.4-705.tgz) = 44523
-MD5 (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 17fccbbe61d1e44d553dca756740ee9c
-SHA256 (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 872c45a35cc4fb904f6b836c99326ffd3dcaa9fec30d0da5c051c0ce6db06e20
-SIZE (ghostscript/ghostscript-8.57-contrib-drivers.tar.gz) = 848539
-MD5 (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 792e25f0571160e7fb009f8288ad8844
-SHA256 (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 9ad4032da8a6200fb3669c285b5ba9495760837617926b1b15cf46f9d8bbf7f8
-SIZE (ghostscript/ghostscript-8.57-bjc880j-lips2p-lips4-lips4v.patch) = 1414
-MD5 (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 9367bf6f6b7a82a3182ba9f74fb8fa21
-SHA256 (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 8aaceb0dd31565880bc5b1318c4da040ba20c2118405807bdf0ed230a62db01b
-SIZE (ghostscript/ghostscript-8.57-ijs-krgb.patch) = 23397
-MD5 (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 4cb50b272deadc1581a6ae38c6cc201f
-SHA256 (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 110282a6fe223d55a837346d3e597ca308f2f6b70dc568777d33cdb1b5c76ddd
-SIZE (ghostscript/ghostscript-8.57-lib-psfiles.patch) = 5149
-MD5 (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 8c1c051edf17c31e24184b96460605e6
-SHA256 (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 61995ad4124e0830a85e8873508bcd19ff0c5ab0b0369187c6a0ca2e761c7afa
-SIZE (ghostscript/ghostscript-8.57-ljet4pjl-lj4dithp-dj505j-picty180.patch) = 16168
-MD5 (ghostscript/ghostscript-8.57-pxl-duplex.patch) = 8f5e640454ed1f4f7b5db46857929703
-SHA256 (ghostscript/ghostscript-8.57-pxl-duplex.patch) = e6ce02b2d2e7a093b4050a36fc9aaccfad24ddaa2494d242e8b2cc13bca165b9
-SIZE (ghostscript/ghostscript-8.57-pxl-duplex.patch) = 7796
diff --git a/print/ghostscript8/files/patch-contrib__gdevhl12.c b/print/ghostscript8/files/patch-contrib__gdevhl12.c
deleted file mode 100644
index 64ef936f0975..000000000000
--- a/print/ghostscript8/files/patch-contrib__gdevhl12.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- contrib/gdevhl12.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/gdevhl12.c	Tue May 15 16:49:03 2007
-@@ -474,7 +474,7 @@
- 	    continue;
- #if 1
- 	/* XXX - please report if you ever see this, then change to #if 0 */
--	fprintf(stderr,
-+	dprintf1(
- 		"hl1250: compression failed (y=%u), doing 1200x300 dpi\n",
- 		band + y);
- #endif
diff --git a/print/ghostscript8/files/patch-contrib__japanese__gdevfmlbp.c b/print/ghostscript8/files/patch-contrib__japanese__gdevfmlbp.c
deleted file mode 100644
index 8bd0d2b123e5..000000000000
--- a/print/ghostscript8/files/patch-contrib__japanese__gdevfmlbp.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- contrib/japanese/gdevfmlbp.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/japanese/gdevfmlbp.c	Tue May 15 16:49:03 2007
-@@ -121,7 +121,7 @@
-      height_inches >=  9.2 ? PAPER_SIZE_B5 :
-      height_inches >=  7.6 ? PAPER_SIZE_A5 : PAPER_SIZE_HAGAKI), landscape);
- #ifdef	FMLBP_DEBUG
--  fprintf(stderr, "w=%d(%f) x h=%d(%f) -> %s\n",
-+  dprintf5("w=%d(%f) x h=%d(%f) -> %s\n",
- 	  dev->width, width_inches, dev->height, height_inches, paper);
- #endif/*FMLBP_DEBUG*/
-   return paper;
diff --git a/print/ghostscript8/files/patch-contrib__pcl3__eprn__eprnparm.c b/print/ghostscript8/files/patch-contrib__pcl3__eprn__eprnparm.c
deleted file mode 100644
index 5d0443b4ff75..000000000000
--- a/print/ghostscript8/files/patch-contrib__pcl3__eprn__eprnparm.c
+++ /dev/null
@@ -1,238 +0,0 @@
---- contrib/pcl3/eprn/eprnparm.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/eprn/eprnparm.c	Tue May 15 02:02:42 2007
-@@ -146,7 +146,7 @@
-   /* First we construct a properly NUL-terminated string */
-   s = (char *) malloc(in_value->size + 1);
-   if (s == NULL) {
--    fprintf(stderr, ERRPREF
-+    eprintf1(ERRPREF
-       "Memory allocation failure in eprn_get_int(): %s.\n",
-       strerror(errno));
-     return_error(gs_error_VMerror);
-@@ -352,8 +352,7 @@
-   'eprn->media_overrides' should be NULL.
- 
-   The function returns zero on success and a non-zero ghostscript error value
--  otherwise. In the latter case, an error message will have been issued on
--  stderr.
-+  otherwise. In the latter case, an error message will have been issued.
- 
- ******************************************************************************/
- 
-@@ -379,7 +378,7 @@
- 
-   /* Open the file */
-   if ((f = fopen(eprn->media_file, "r")) == NULL) {
--    fprintf(stderr, "%s" ERRPREF "Error opening the media configuration file\n"
-+    eprintf5("%s" ERRPREF "Error opening the media configuration file\n"
-       "%s    `%s'\n%s  for reading: %s.\n",
-       epref, epref, eprn->media_file, epref, strerror(errno));
-     return_error(gs_error_invalidfileaccess);
-@@ -395,7 +394,7 @@
- 
-     /* Check for buffer overflow */
-     if ((s = strchr(buffer, '\n')) == NULL && fgetc(f) != EOF) {
--      fprintf(stderr, "%s" ERRPREF "Exceeding line length %d in "
-+      eprintf5("%s" ERRPREF "Exceeding line length %d in "
- 	  "media configuration file\n%s  %s, line %d.\n",
- 	epref, BUFFER_SIZE - 2 /* '\n'+'\0' */, epref, eprn->media_file, line);
-       cleanup();
-@@ -453,7 +452,7 @@
-       new_list = (eprn_PageDescription *)
- 	realloc(list, (read+1)*sizeof(eprn_PageDescription));
-       if (new_list == NULL) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "Memory allocation failure in eprn_read_media_data(): %s.\n",
- 	  epref, strerror(errno));
- 	cleanup();
-@@ -477,14 +476,14 @@
-     {
-       ms_MediaCode code = ms_find_code_from_name(s, eprn->flag_desc);
-       if (code == ms_none) {
--	fprintf(stderr, "%s" ERRPREF "Unknown media name (%s) in "
-+	eprintf5("%s" ERRPREF "Unknown media name (%s) in "
- 	    "media configuration file\n%s  %s, line %d.\n",
- 	  epref, s, epref, eprn->media_file, line);
- 	cleanup();
- 	return_error(gs_error_rangecheck);
-       }
-       if (code & MS_ROTATED_FLAG) {
--	fprintf(stderr, "%s" ERRPREF "Invalid substring \"" MS_ROTATED_STRING
-+	eprintf5("%s" ERRPREF "Invalid substring \"" MS_ROTATED_STRING
- 	    "\" in media name (%s)\n"
- 	  "%s  in media configuration file %s, line %d.\n",
- 	  epref, s, epref, eprn->media_file, line);
-@@ -499,7 +498,7 @@
- 	  &current->bottom, &current->right, &current->top, &chars_read) != 4 ||
- 	t[chars_read] != '\0') {
-       if (*t != '\0') *(t-1) = ' ';	/* remove NUL after media name */
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf5("%s" ERRPREF
- 	"Syntax error in media configuration file %s, line %d:\n%s    %s\n",
- 	epref, eprn->media_file, line, epref, buffer);
-       cleanup();
-@@ -509,7 +508,7 @@
-     /* Check for sign */
-     if (current->left < 0 || current->bottom < 0 || current->right < 0 ||
- 	current->top < 0) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf4("%s" ERRPREF
- 	"Ghostscript does not support negative margins (line %d in the\n"
- 	"%s  media configuration file %s).\n",
- 	epref, line, epref, eprn->media_file);
-@@ -530,14 +529,14 @@
-        The user might not notice the reason without help, hence we check. */
-     if (ms_without_flags(current->code) == ms_CustomPageSize &&
- 	eprn->cap->custom == NULL)
--      fprintf(stderr, "%s" WARNPREF "The media configuration file %s\n"
-+      eprintf6("%s" WARNPREF "The media configuration file %s\n"
- 	"%s    contains a custom page size entry in line %d, "
- 	  "but custom page sizes\n"
- 	"%s    are not supported by the %s.\n",
- 	wpref, eprn->media_file, wpref, line, wpref, eprn->cap->name);
-   }
-   if (ferror(f)) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf2("%s" ERRPREF
-       "Unidentified system error while reading `%s'.\n",
-       epref, eprn->media_file);
-     cleanup();
-@@ -547,7 +546,7 @@
- 
-   /* Was the file empty? */
-   if (read == 0) {
--    fprintf(stderr, "%s" ERRPREF "The media configuration file %s\n"
-+    eprintf3("%s" ERRPREF "The media configuration file %s\n"
-       "%s  does not contain any media information.\n",
-       epref, eprn->media_file, epref);
-     return_error(gs_error_rangecheck);
-@@ -557,7 +556,7 @@
-   eprn->media_overrides = (eprn_PageDescription *) gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), read + 1,
-     sizeof(eprn_PageDescription), "eprn_read_media_data");
-   if (eprn->media_overrides == NULL) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf1("%s" ERRPREF
-       "Memory allocation failure from gs_malloc() in eprn_read_media_data().\n",
-       epref);
-     free(list);
-@@ -585,8 +584,7 @@
-   from the specified media configuration file.
- 
-   The return code will be zero an success and a ghostscript error code
--  otherwise. In the latter case, an error message will have been issued on
--  stderr.
-+  otherwise. In the latter case, an error message will have been issued.
- 
-   The 'length' may be positive in which case it denotes the length of the
-   string 'media_file' or zero in which case the string is assumed to be
-@@ -629,7 +627,7 @@
-     eprn->media_file = (char *)gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), length + 1, sizeof(char),
-       "eprn_set_media_data");
-     if (eprn->media_file == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc() in "
- 	"eprn_set_media_data().\n",
- 	epref);
-@@ -928,9 +926,9 @@
-     rc = eprn_get_int(&string_value, eprn_colour_model_list, &temp);	\
-     if (rc != 0) {							\
-       if (rc != gs_error_VMerror) {					\
--	fprintf(stderr, "%s" ERRPREF "Unknown colour model: `", epref);	\
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr); \
--	fputs("'.\n", stderr);						\
-+	eprintf1("%s" ERRPREF "Unknown colour model: `", epref);	\
-+	errwrite(string_value.data, sizeof(char)*string_value.size);	\
-+	eprintf("'.\n");						\
-       }									\
-       last_error = rc;							\
-       param_signal_error(plist, pname, last_error);			\
-@@ -994,7 +992,7 @@
-       eprn->black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for BlackLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1011,7 +1009,7 @@
-       eprn->non_black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for CMYLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1025,8 +1023,8 @@
-     bool temp;
-     if ((rc = param_read_bool(plist, "CUPSAccounting", &temp)) == 0) {
-       if (eprn->CUPS_accounting && !temp)
--	fputs(CUPS_WARNPREF WARNPREF
--	  "Attempt to set CUPSAccounting from true to false.\n", stderr);
-+	eprintf(CUPS_WARNPREF WARNPREF
-+	  "Attempt to set CUPSAccounting from true to false.\n");
-       else eprn->CUPS_accounting = temp;
-     }
-     else if (rc < 0) last_error = rc;
-@@ -1042,10 +1040,10 @@
-       eprn->intensity_rendering = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid method for IntensityRendering: `",
-+      eprintf1("%s" ERRPREF "Invalid method for IntensityRendering: `",
-         epref);
--      fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--      fputs("'.\n", stderr);
-+      errwrite(string_value.data, sizeof(char)*string_value.size);
-+      eprintf("'.\n");
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -1066,7 +1064,7 @@
-       eprn->default_orientation = temp;
-     }
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "LeadingEdge may only have values 0 to 3, not %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1111,7 +1109,7 @@
-     /* Current (up to at least gs 6.50) ghostscript versions do not accept
-        negative MediaPosition values. */
-     if (eprn->media_position < 0)
--      fprintf(stderr, "%s" WARNPREF
-+      eprintf3("%s" WARNPREF
- 	"Ghostscript does not accept negative values (%d) for the\n"
- 	  "%s    `MediaPosition' parameter.\n",
- 	wpref, eprn->media_position, wpref);
-@@ -1145,7 +1143,7 @@
-       eprn->pagecount_file = (char *)gs_malloc(gs_lib_ctx_get_non_gc_memory_t(), string_value.size + 1,
- 	sizeof(char), "eprn_put_params");
-       if (eprn->pagecount_file == NULL) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf1( "%s" ERRPREF
- 	  "Memory allocation failure from gs_malloc() in eprn_put_params().\n",
- 	  epref);
- 	last_error = gs_error_VMerror;
-@@ -1167,7 +1165,7 @@
-       eprn->non_black_levels = temp;
-     }
-     else {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The value for RGBLevels is outside the range permitted: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1187,7 +1185,7 @@
-   */
-   if ((rc = param_read_int(plist, (pname = "BitsPerPixel"), &temp)) == 0) {
-     if (temp != dev->color_info.depth) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf3("%s" ERRPREF
- 	"Attempt to set `BitsPerPixel' to a value (%d)\n"
- 	"%s  other than the one selected by the driver.\n",
- 	epref, temp, epref);
diff --git a/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.c b/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.c
deleted file mode 100644
index 696feccb9a52..000000000000
--- a/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.c
+++ /dev/null
@@ -1,237 +0,0 @@
---- contrib/pcl3/eprn/gdeveprn.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/eprn/gdeveprn.c	Tue May 15 01:34:15 2007
-@@ -95,6 +95,7 @@
- #ifdef EPRN_TRACE
- #include "gdebug.h"
- #endif	/* EPRN_TRACE */
-+#include "gxstdio.h"
- 
- /* Special headers for this device */
- #ifndef EPRN_NO_PAGECOUNTFILE
-@@ -143,8 +144,8 @@
-       "! eprn_get_initial_matrix(): code is still ms_none.\n");
- #endif
-     if (eprn_set_page_layout(dev) != 0)
--      fputs("  Processing can't be stopped at this point although this error "
--	"occurred.\n", stderr);
-+      eprintf("  Processing can't be stopped at this point although this error "
-+	"occurred.\n");
-       /* The current function has a signature without the ability to signal
- 	 an error condition. */
-   }
-@@ -303,17 +304,17 @@
- 
-   Function: print_flags
- 
--  Print a textual description of 'flags' on 'f'.
-+  Print a textual description of 'flags' to the error stream.
- 
- ******************************************************************************/
- 
--static void print_flags(FILE *f, ms_MediaCode flags, const ms_Flag *user_flags)
-+static void print_flags(ms_MediaCode flags, const ms_Flag *user_flags)
- {
-   /* Non-standard flags first */
-   if (user_flags != NULL) {
-     while (user_flags->code != ms_none) {
-       if (user_flags->code & flags) {
--	fputs(user_flags->name, f);
-+	errprintf(user_flags->name);
- 	flags &= ~user_flags->code;
-       }
-       user_flags++;
-@@ -321,17 +322,17 @@
-   }
- 
-   /* Standard substrings */
--  if (flags & MS_SMALL_FLAG) fputs(MS_SMALL_STRING, f);
--  if (flags & MS_BIG_FLAG  ) fputs(MS_BIG_STRING,   f);
--  if (flags & MS_EXTRA_FLAG) fputs(MS_EXTRA_STRING, f);
-+  if (flags & MS_SMALL_FLAG) eprintf(MS_SMALL_STRING);
-+  if (flags & MS_BIG_FLAG  ) eprintf(MS_BIG_STRING);
-+  if (flags & MS_EXTRA_FLAG) eprintf(MS_EXTRA_STRING);
-   flags &= ~(MS_SMALL_FLAG | MS_BIG_FLAG | MS_EXTRA_FLAG);
- 
-   /* Completeness check */
-   if (flags & ~MS_TRANSVERSE_FLAG)
--    fprintf(f, "0x%04X", (unsigned int)(flags & ~MS_TRANSVERSE_FLAG));
-+    eprintf1("0x%04X", (unsigned int)(flags & ~MS_TRANSVERSE_FLAG));
- 
-   /* Standard qualifier */
--  if (flags & MS_TRANSVERSE_FLAG) fputs("." MS_TRANSVERSE_STRING, f);
-+  if (flags & MS_TRANSVERSE_FLAG) eprintf("." MS_TRANSVERSE_STRING);
- 
-   return;
- }
-@@ -347,37 +348,37 @@
- 
-   If the derived device has set a flag mismatch error reporting function, the
-   call will be passed to that function. Otherwise a general error message is
--  written on 'err'.
-+  written through the graphics library's eprintf().
- 
- ******************************************************************************/
- 
--static void eprn_flag_mismatch(FILE *err, const struct s_eprn_Device *eprn,
-+static void eprn_flag_mismatch(const struct s_eprn_Device *eprn,
-   bool no_match)
- {
--  if (eprn->fmr != NULL) (*eprn->fmr)(err, eprn, no_match);
-+  if (eprn->fmr != NULL) (*eprn->fmr)(eprn, no_match);
-   else {
-     const char *epref = eprn->CUPS_messages? CUPS_ERRPREF: "";
- 
--    fprintf(err, "%s" ERRPREF "The %s does not support ",
-+    eprintf2("%s" ERRPREF "The %s does not support ",
-       epref, eprn->cap->name);
--    if (eprn->desired_flags == 0) fprintf(err, "an empty set of media flags");
-+    if (eprn->desired_flags == 0) eprintf("an empty set of media flags");
-     else {
--      fputs("the \"", err);
--      print_flags(err, eprn->desired_flags, eprn->flag_desc);
--      fputs("\" flag(s)", err);
-+      eprintf("the \"");
-+      print_flags(eprn->desired_flags, eprn->flag_desc);
-+      eprintf("\" flag(s)");
-     }
--    fprintf(err, "\n%s  (ignoring presence or absence of \"", epref);
-+    eprintf1("\n%s  (ignoring presence or absence of \"", epref);
-     {
-       ms_MediaCode optional = MS_TRANSVERSE_FLAG;
-       if (eprn->optional_flags != NULL) {
- 	const ms_MediaCode *of = eprn->optional_flags;
- 	while (*of != ms_none) optional |= *of++;
-       }
--      print_flags(err, optional, eprn->flag_desc);
-+      print_flags(optional, eprn->flag_desc);
-     }
--    fputs("\") for ", err);
--    if (no_match) fputs("any", err); else fputs("this", err);
--    fputs(" page size.\n", err);
-+    eprintf("\") for ");
-+    if (no_match) eprintf("any"); else eprintf("this");
-+    eprintf(" page size.\n");
-   }
- 
-   return;
-@@ -483,7 +484,7 @@
-   the media flags, or the page descriptions have been changed.
- 
-   The function returns zero on success and a non-zero value otherwise.
--  In the latter case, an error message has been issued on stderr. This can only
-+  In the latter case, an error message has been issued. This can only
-   occur if the media size is not supported with the flags requested.
- 
-   On success, the following variables in the device structure are consistent:
-@@ -615,21 +616,21 @@
-     /* No discrete match */
-     if (best_cmatch == NULL) {
-       /* No match at all. */
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf3("%s" ERRPREF
- 	"This document requests a page size of %.0f x %.0f bp.\n",
- 	   epref, dev->MediaSize[0], dev->MediaSize[1]);
-       if (eprn->cap->custom == NULL) {
- 	/* The printer does not support custom page sizes */
- 	if (eprn->media_overrides != NULL)
--	  fprintf(stderr,
-+	  eprintf1(
- 	    "%s  The media configuration file does not contain an entry for "
- 	      " this size.\n", epref);
- 	else
--	  fprintf(stderr, "%s  This size is not supported by the %s.\n",
-+	  eprintf2("%s  This size is not supported by the %s.\n",
- 	    epref, eprn->cap->name);
-       }
-       else
--	fprintf(stderr,
-+	eprintf3(
- 	  "%s  This size is not supported as a discrete size and it exceeds "
- 	    "the\n"
- 	  "%s  custom page size limits for the %s.\n",
-@@ -637,7 +638,7 @@
-       return -1;
-     }
-     if (eprn->media_overrides != NULL && best_cdmatch == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf6("%s" ERRPREF
- 	"This document requests a page size of %.0f x %.0f bp\n"
- 	"%s  but there is no entry for this size in the "
- 	  "media configuration file\n"
-@@ -692,7 +693,7 @@
-   }
-   /* If we've found a match, 'code' is no longer 'ms_none'. */
-   if (eprn->code == ms_none) {
--    eprn_flag_mismatch(stderr, eprn, no_match);
-+    eprn_flag_mismatch(eprn, no_match);
-     return -1;
-   }
- 
-@@ -762,7 +763,7 @@
- 
-       rc = gdev_prn_open((gx_device *)dev);
-       if (rc < 0) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "Failure of gdev_prn_open(), code is %d.\n",
- 	  epref, rc);
- 	return rc;
-@@ -944,13 +945,13 @@
-       &eprn->black_levels, &eprn->non_black_levels) != 0) {
-     gs_param_string str;
- 
--    fprintf(stderr, "%s" ERRPREF "The requested combination of colour model (",
-+    eprintf1("%s" ERRPREF "The requested combination of colour model (",
-       epref);
-     str.size = 0;
-     if (eprn_get_string(eprn->colour_model, eprn_colour_model_list, &str) != 0)
-       assert(0); /* Bug. No harm on NDEBUG because I've just set the size. */
--    fwrite(str.data, str.size, sizeof(str.data[0]), stderr);
--    fprintf(stderr, "),\n"
-+    errwrite(str.data, str.size * sizeof(str.data[0]));
-+    eprintf7("),\n"
-       "%s  resolution (%gx%g ppi) and intensity levels (%d, %d) is\n"
-       "%s  not supported by the %s.\n",
-       epref, device->HWResolution[0], device->HWResolution[1],
-@@ -1022,9 +1023,8 @@
- 	  updating the file. */
-     else {
-       /* pcf_getcount() has issued an error message. */
--      fputs(
--        "  No further attempts will be made to access the page count file.\n",
--	stderr);
-+      eprintf(
-+        "  No further attempts will be made to access the page count file.\n");
-       gs_free(gs_lib_ctx_get_non_gc_memory_t(), eprn->pagecount_file, strlen(eprn->pagecount_file) + 1,
- 	sizeof(char), "eprn_open_device");
-       eprn->pagecount_file = NULL;
-@@ -1060,7 +1060,7 @@
-     }
-   }
-   if (eprn->scan_line.str == NULL) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf1("%s" ERRPREF
-       "Memory allocation failure from gs_malloc() in eprn_open_device().\n",
-       epref);
-     return_error(gs_error_VMerror);
-@@ -1156,7 +1156,7 @@
-       accounting, this seems unfair.
-   */
-   if (rc == 0 && eprn->CUPS_accounting)
--    fprintf(stderr, "PAGE: %ld %d\n", dev->ShowpageCount, num_copies);
-+    eprintf2("PAGE: %ld %d\n", dev->ShowpageCount, num_copies);
-     /* The arguments are the number of the page, starting at 1, and the number
-        of copies of that page. */
- 
-@@ -1166,9 +1166,8 @@
-     assert(num_copies > 0);	/* because of signed/unsigned */
-     if (pcf_inccount(eprn->pagecount_file, num_copies) != 0) {
-       /* pcf_inccount() has issued an error message. */
--      fputs(
--	"  No further attempts will be made to access the page count file.\n",
--	stderr);
-+      eprintf(
-+	"  No further attempts will be made to access the page count file.\n");
-       gs_free(gs_lib_ctx_get_non_gc_memory_t(), eprn->pagecount_file, strlen(eprn->pagecount_file) + 1,
- 	sizeof(char), "eprn_output_page");
-       eprn->pagecount_file = NULL;
diff --git a/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.h b/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.h
deleted file mode 100644
index 1da6579effbc..000000000000
--- a/print/ghostscript8/files/patch-contrib__pcl3__eprn__gdeveprn.h
+++ /dev/null
@@ -1,22 +0,0 @@
---- contrib/pcl3/eprn/gdeveprn.h.orig	Thu Apr 26 01:33:54 2007
-+++ contrib/pcl3/eprn/gdeveprn.h	Tue May 15 02:03:02 2007
-@@ -396,8 +396,8 @@
- struct s_eprn_Device;
-  /* The preceding statement is needed in order to establish a forward
-     declaration for "struct s_eprn_Device" at file scope. */
--typedef void (*eprn_FlagMismatchReporter)(FILE *f,
--  const struct s_eprn_Device *dev, bool no_match);
-+typedef void (*eprn_FlagMismatchReporter)(const struct s_eprn_Device *dev,
-+		bool no_match);
- /*  A function of this kind will be called if the requested media flags cannot
-     be satisfied by the printer although the size itself is supported for some
-     (unspecified) set of flags. The parameter 'no_match' indicates whether the
-@@ -406,7 +406,7 @@
-     capabilities). The requested set of media selection flags is available in
-     'dev->eprn.desired_flags' and 'dev->eprn.optional_flags' (MS_ROTATED_FLAG
-     will never be set).
--    The function must write an error message on 'f'.
-+    The function must write an error message.
- */
- 
- /*****************************************************************************/
diff --git a/print/ghostscript8/files/patch-contrib__pcl3__src__gdevpcl3.c b/print/ghostscript8/files/patch-contrib__pcl3__src__gdevpcl3.c
deleted file mode 100644
index dd8e850bf6e0..000000000000
--- a/print/ghostscript8/files/patch-contrib__pcl3__src__gdevpcl3.c
+++ /dev/null
@@ -1,314 +0,0 @@
---- contrib/pcl3/src/gdevpcl3.c.orig	Thu Apr 26 01:27:24 2007
-+++ contrib/pcl3/src/gdevpcl3.c	Tue May 15 01:48:00 2007
-@@ -338,7 +338,7 @@
-   /* First we construct a properly NUL-terminated string */
-   s = (char *) malloc(in_value->size + 1);
-   if (s == NULL) {
--    fprintf(stderr, ERRPREF
-+    eprintf1(ERRPREF
-       "Memory allocation failure in get_int_for_string(): %s.\n",
-       strerror(errno));
-     return_error(gs_error_VMerror);
-@@ -434,25 +434,25 @@
-   const char *epref = eprn->CUPS_messages? CUPS_ERRPREF: "";
- 
-   if (eprn->desired_flags == 0) {
--    fprintf(stderr,
-+    eprintf2(
-       "%s" ERRPREF "The %s does not support the requested media properties.\n",
-       epref, eprn->cap->name);
-   }
-   else if (eprn->desired_flags == MS_BIG_FLAG) {
--    fprintf(stderr, "%s" ERRPREF "The %s does not support banner printing",
-+    eprintf2("%s" ERRPREF "The %s does not support banner printing",
-       epref, eprn->cap->name);
--    if (!no_match) fputs(" for this size", stderr);
--    fputs(".\n", stderr);
-+    if (!no_match) eprintf(" for this size");
-+    eprintf(".\n");
-   }
-   else if (eprn->desired_flags == PCL_CARD_FLAG) {
--    fprintf(stderr, "%s" ERRPREF
-+    eprintf2("%s" ERRPREF
-       "The %s does not support a `Card' variant for ",
-       epref, eprn->cap->name);
--    if (no_match) fputs("any", stderr); else fputs("this", stderr);
--    fputs(" size.\n", stderr);
-+    if (no_match) eprintf("any"); else eprintf("this");
-+    eprintf(" size.\n");
-   }
-   else {
--    fprintf(stderr,
-+    eprintf1(
-       "%s" ERRPREF "Banner printing on postcards?? You must be joking!\n",
-       epref);
-   }
-@@ -699,8 +699,8 @@
-   be copied to '*s'.
- 
-   The function returns a negative ghostscript error code on error and zero
--  otherwise. In the former case an error message will have been issued on
--  stderr, using 'epref' as a prefix for the message.
-+  otherwise. In the former case an error message will have been issued, 
-+  using 'epref' as a prefix for the message.
- 
- ******************************************************************************/
- 
-@@ -728,7 +728,7 @@
- 
-     if (s->str == NULL) {
-       s->length = 0;
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc().\n", epref);
-       rc = gs_error_VMerror;
-       param_signal_error(plist, pname, rc);
-@@ -760,8 +760,7 @@
-   copied.
- 
-   The function returns a negative ghostscript error code on error and zero
--  otherwise. In the former case an error message will have been issued on
--  stderr.
-+  otherwise. In the former case an error message will have been issued.
- 
- ******************************************************************************/
- 
-@@ -785,7 +784,7 @@
-       "fetch_cstring");
- 
-     if (*s == NULL) {
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf1("%s" ERRPREF
- 	"Memory allocation failure from gs_malloc().\n", epref);
-       rc = gs_error_VMerror;
-       param_signal_error(plist, pname, rc);
-@@ -907,9 +906,9 @@
- 	eprn_init_device((eprn_Device *)dev, &pcl3_printers[dev->printer].desc);
-       }
-       else {
--	fprintf(stderr, "%s" ERRPREF "Unknown subdevice name: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown subdevice name: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-       }
-@@ -925,8 +924,8 @@
-       == 0) {
-     if (temp != pcl_cm_none && temp != pcl_cm_rl && temp != pcl_cm_tiff &&
- 	temp != pcl_cm_delta && temp != pcl_cm_crdr) {
--      fprintf(stderr,
--	"%s" ERRPREF "Unsupported compression method: %d.\n", epref, temp);
-+      eprintf2("%s" ERRPREF "Unsupported compression method: %d.\n",
-+	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -934,7 +933,7 @@
-       if (temp == pcl_cm_crdr && (dev->printer == HPDeskJet ||
- 	  dev->printer == HPDeskJetPlus || dev->printer == HPDJ500)) {
- 	/* This I know to be the case for the DJ 500. The others are guessed. */
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s" ERRPREF "The %s does not support compression method 9.\n",
- 	  epref, dev->eprn.cap->name);
- 	last_error = gs_error_rangecheck;
-@@ -956,7 +955,7 @@
-     if (1 <= temp && temp <= 5 && (dev->printer != HPDJ500C || temp <= 3))
-       requested.depletion = temp;
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid value for depletion: %d.\n",
-+      eprintf2("%s" ERRPREF "Invalid value for depletion: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-@@ -978,7 +977,7 @@
- 	    Hence I'm giving an error message only in those cases where HP
- 	    explicitly states that the printer does not support the command.
- 	  */
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s" ERRPREF "The %s does not support setting a dry time.\n",
- 	  epref, dev->eprn.cap->name);
- 	last_error = gs_error_rangecheck;
-@@ -987,8 +986,8 @@
-       else data->dry_time = temp;
-     }
-     else {
--      fprintf(stderr,
--	"%s" ERRPREF "Invalid value for the dry time: %d.\n", epref, temp);
-+      eprintf2("%s" ERRPREF "Invalid value for the dry time: %d.\n",
-+	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-     }
-@@ -1008,7 +1007,7 @@
- 	    dev->Duplex_set = 0;	/* force to "null" */
- 	}
- 	else {
--	  fprintf(stderr, "%s" ERRPREF
-+	  eprintf2("%s" ERRPREF
- 	    "You can use a non-trivial value for DuplexCapability\n"
- 	    "%s  only for unspec and unspecold.\n", epref, epref);
- 	  last_error = gs_error_rangecheck;
-@@ -1016,9 +1015,9 @@
- 	}
-       }
-       else {
--	fprintf(stderr, "%s" ERRPREF "Invalid duplex capability: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Invalid duplex capability: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-       }
-@@ -1037,12 +1036,12 @@
-     if ((rc = param_read_bool(plist, (pname = "Duplex"), &temp)) == 0 &&
- 	temp && dev->duplex_capability == Duplex_none) {
-       if (dev->printer == pcl3_generic_new || dev->printer == pcl3_generic_old)
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf3("%s" ERRPREF
-           "The '%s' device does not support duplex printing unless\n"
- 	  "%s  'DuplexCapability' is not 'none'.\n",
- 	  epref, find_subdevice_name(dev->printer), epref);
-       else
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf2("%s" ERRPREF
- 	  "The %s does not support duplex printing.\n",
- 	  epref, dev->eprn.cap->name);
-       last_error = gs_error_rangecheck;
-@@ -1071,9 +1070,9 @@
-     rc = get_int_for_string(&string_value, media_type_list, &temp);
-     if (rc != 0) {
-       if (rc != gs_error_VMerror) {
--	fprintf(stderr, "%s" ERRPREF "Unknown medium: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown medium: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
-       }
-       last_error = rc;
-       param_signal_error(plist, pname, last_error);
-@@ -1081,7 +1080,7 @@
-     else {
-       new_quality = true;
-       if (temp < 0 || 6 < temp)
--	fprintf(stderr, "%s" WARNPREF "Unknown media type code: %d.\n",
-+	eprintf2("%s" WARNPREF "Unknown media type code: %d.\n",
- 	  wpref, temp);
-       pcl3_set_mediatype(data, temp);
-     }
-@@ -1107,7 +1106,7 @@
-       if (pcl_has_CRD(data->level))
- 	data->level = (temp? pcl_level_3plus_CRD_only: pcl_level_3plus_S68);
-       else if (temp == true) {
--	fprintf(stderr, "%s" ERRPREF
-+	eprintf1("%s" ERRPREF
- 	  "OnlyCRD may be set only for group-3 devices.\n", epref);
- 	last_error = gs_error_rangecheck;
- 	param_signal_error(plist, pname, last_error);
-@@ -1140,9 +1139,9 @@
-     rc = get_int_for_string(&string_value, print_quality_list, &temp);
-     if (rc != 0) {
-       if (rc != gs_error_VMerror) {
--	fprintf(stderr, "%s" ERRPREF "Unknown print quality: `", epref);
--	fwrite(string_value.data, sizeof(char), string_value.size, stderr);
--	fputs("'.\n", stderr);
-+	eprintf1("%s" ERRPREF "Unknown print quality: `", epref);
-+	errwrite(string_value.data, sizeof(char)*string_value.size);
-+	eprintf("'.\n");
-       }
-       last_error = rc;
-       param_signal_error(plist, pname, last_error);
-@@ -1150,7 +1149,7 @@
-     else {
-       new_quality = true;
-       if (temp < -1 || 1 < temp)
--	fprintf(stderr, "%s" WARNPREF "Unknown print quality: %d.\n",
-+	eprintf2("%s" WARNPREF "Unknown print quality: %d.\n",
- 	  wpref, temp);
-       pcl3_set_printquality(data, temp);
-     }
-@@ -1165,7 +1164,7 @@
- 	== 0) {
-     if (0 <= temp && temp <= 2) requested.quality = temp;
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "Invalid value for raster graphics quality: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1186,7 +1185,7 @@
-   if ((rc = param_read_int(plist, (pname = "SendNULs"), &temp)) == 0) {
-     if (data->NULs_to_send >= 0) data->NULs_to_send = temp;
-     else {
--      fprintf(stderr,
-+      eprintf2(
- 	"%s" ERRPREF "Invalid value for SendNULs parameter: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-@@ -1202,7 +1201,7 @@
-       (rc = param_read_int(plist, pname, &temp)) == 0) {
-     if (0 <= temp && temp <= 2) requested.shingling = temp;
-     else {
--      fprintf(stderr, "%s" ERRPREF "Invalid value for shingling: %d.\n",
-+      eprintf2("%s" ERRPREF "Invalid value for shingling: %d.\n",
- 	epref, temp);
-       last_error = gs_error_rangecheck;
-       param_signal_error(plist, pname, last_error);
-@@ -1280,7 +1279,7 @@
-   /* Check on rendering parameters */
-   if ((dev->eprn.black_levels > 2 || dev->eprn.non_black_levels > 2) &&
-       dev->file_data.print_quality == -1)
--    fprintf(stderr,
-+    eprintf2(
-       "%s" WARNPREF "More than 2 intensity levels and draft quality\n"
-       "%s    are unlikely to work in combination.\n", wpref, wpref);
- 
-@@ -1311,18 +1310,18 @@
-       */
-       char buffer[50];
- 
--      fprintf(stderr, "%s" ERRPREF
-+      eprintf2("%s" ERRPREF
- 	"The current configuration for this driver has identified the\n"
- 	"%s  page setup requested by the document as being for `",
- 	epref, epref);
-       if (ms_find_name_from_code(buffer, sizeof(buffer),
--	  dev->eprn.code, flag_description) == 0) fputs(buffer, stderr);
--      else fputs("UNKNOWN", stderr);	/* should never happen */
--      fprintf(stderr, "' (%.0f x %.0f bp).\n"
-+	  dev->eprn.code, flag_description) == 0) eprintf(buffer);
-+      else eprintf("UNKNOWN");	/* should never happen */
-+      eprintf3("' (%.0f x %.0f bp).\n"
- 	"%s  The driver does not know how to do this in PCL.\n",
- 	dev->MediaSize[0], dev->MediaSize[1], epref);
-       if (dev->eprn.media_file != NULL)
--	fprintf(stderr,
-+	eprintf2(
- 	  "%s  You should therefore not include such an entry in the\n"
- 	  "%s  media configuration file.\n", epref, epref);
-       return_error(gs_error_rangecheck);
-@@ -1473,7 +1472,7 @@
-       pcl_cm_is_differential(dev->file_data.compression) &&
- 	rd.previous == NULL) {
-     free(lengths); free(rd.next); free(rd.previous);
--    fprintf(stderr, "%s" ERRPREF "Memory allocation failure from malloc().\n",
-+    eprintf1("%s" ERRPREF "Memory allocation failure from malloc().\n",
-       epref);
-     return_error(gs_error_VMerror);
-   }
-@@ -1514,7 +1513,7 @@
-     free(lengths); free(rd.next); free(rd.previous);
-     for (j = 0; j < 2; j++) free(rd.workspace[j]);
- 
--    fprintf(stderr, "%s" ERRPREF "Memory allocation failure from malloc().\n",
-+    eprintf1("%s" ERRPREF "Memory allocation failure from malloc().\n",
-       epref);
-     return_error(gs_error_VMerror);
-   }
diff --git a/print/ghostscript8/files/patch-lib__ps2epsi.CAN-2004-0967 b/print/ghostscript8/files/patch-lib__ps2epsi.CAN-2004-0967
deleted file mode 100644
index c1b1cbcc3fbe..000000000000
--- a/print/ghostscript8/files/patch-lib__ps2epsi.CAN-2004-0967
+++ /dev/null
@@ -1,19 +0,0 @@
---- lib/ps2epsi.orig	Thu May 25 02:19:27 2006
-+++ lib/ps2epsi	Fri Mar 23 10:55:11 2007
-@@ -5,14 +5,8 @@
- # executable name set in the makefile
- GS_EXECUTABLE=gs
- 
--# try to create a temporary file securely
--tmpdir=/tmp/ps2epsi.$$
--(umask 077 && mkdir $tmpdir)
--if test ! -d $tmpdir; then
--	echo "failed: could not create temporary file"
--	exit 1
--fi
--tmpfile=$tmpdir/ps2epsi$$
-+tmpfile=`mktemp -t ps2epsi.XXXXXX || exit 1`
-+trap "rm -rf $tmpfile" 0 1 2 3 7 13 15
- 
- export outfile
- 
diff --git a/print/ghostscript8/files/patch-lib__pv.sh.CAN-2004-0967 b/print/ghostscript8/files/patch-lib__pv.sh.CAN-2004-0967
deleted file mode 100644
index a37fc43aada9..000000000000
--- a/print/ghostscript8/files/patch-lib__pv.sh.CAN-2004-0967
+++ /dev/null
@@ -1,16 +0,0 @@
---- lib/pv.sh.orig	Mon Nov 28 02:18:26 2005
-+++ lib/pv.sh	Mon Nov 28 02:18:59 2005
-@@ -29,9 +29,10 @@
- PAGE=$1
- shift
- FILE=$1
-+TEMPFILE=`mktemp -t ${FILE}XXXXXX` || exit 1
- shift
--trap "rm -rf $TEMPDIR/$FILE.$$.pv" 0 1 2 15
-+trap "rm -rf $TEMPFILE" 0 1 2 15
- #dvips -D$RESOLUTION -p $PAGE -n 1 $FILE $* -o $FILE.$$.pv
--dvips -p $PAGE -n 1 $FILE $* -o $FILE.$$.pv
--gs $FILE.$$.pv
-+dvips -p $PAGE -n 1 $FILE $* -o $TEMPFILE
-+gs $TEMPFILE
- exit 0
diff --git a/print/ghostscript8/files/patch-src:fapi_ft.c b/print/ghostscript8/files/patch-src:fapi_ft.c
index 52f28daefcf7..d1c936dd64c4 100644
--- a/print/ghostscript8/files/patch-src:fapi_ft.c
+++ b/print/ghostscript8/files/patch-src:fapi_ft.c
@@ -1,16 +1,20 @@
---- src/fapi_ft.c.orig	Mon Mar 13 17:18:19 2006
-+++ src/fapi_ft.c	Sun Mar 18 16:23:21 2007
-@@ -26,11 +26,14 @@
- #include "math_.h"
+--- src/fapi_ft.c.orig	Wed Jul 11 09:26:24 2007
++++ src/fapi_ft.c	Fri Aug 10 02:40:41 2007
+@@ -28,11 +28,14 @@
+ #include "gserror.h"
  
  /* FreeType headers */
 -#include "freetype/freetype.h"
+-#include "freetype/ftincrem.h"
+-#include "freetype/ftglyph.h"
+-#include "freetype/ftoutln.h"
+-#include "freetype/fttrigon.h"
 +#include "ft2build.h"
 +#include FT_FREETYPE_H
- #include "freetype/ftincrem.h"
- #include "freetype/ftglyph.h"
- #include "freetype/ftoutln.h"
- #include "freetype/fttrigon.h"
++#include FT_INCREMENTAL_H
++#include FT_GLYPH_H
++#include FT_OUTLINE_H
++#include FT_TRIGONOMETRY_H
 +#include "gserrors.h"
 +#include "gserror.h"
  
diff --git a/print/ghostscript8/files/patch-src:unix-gcc.mak b/print/ghostscript8/files/patch-src:unix-gcc.mak
index fe6c53b5c5cc..15462223d8b1 100644
--- a/print/ghostscript8/files/patch-src:unix-gcc.mak
+++ b/print/ghostscript8/files/patch-src:unix-gcc.mak
@@ -1,5 +1,5 @@
---- src/unix-gcc.mak.orig	Sat May 12 02:02:29 2007
-+++ src/unix-gcc.mak	Fri May 25 04:03:33 2007
+--- src/unix-gcc.mak.orig	Tue Jul 31 05:13:56 2007
++++ src/unix-gcc.mak	Fri Aug 10 22:01:41 2007
 @@ -21,15 +21,17 @@
  # source, generated intermediate file, and object directories
  # for the graphics library (GL) and the PostScript/PDF interpreter (PS).
@@ -42,7 +42,24 @@
  exec_prefix = $(prefix)
  bindir = $(exec_prefix)/bin
  scriptdir = $(bindir)
-@@ -143,7 +144,7 @@
+@@ -62,6 +63,7 @@
+ datadir = $(prefix)/share
+ gsdir = $(datadir)/ghostscript
+ gsdatadir = $(gsdir)/$(GS_DOT_VERSION)
++gssharedir = $(libdir)/ghostscript/$(GS_DOT_VERSION)
+ 
+ docdir=$(gsdatadir)/doc
+ exdir=$(gsdatadir)/examples
+@@ -108,7 +110,7 @@
+ # -DHAVE_HYPOT
+ #       use the system hypot() call
+ 
+-CAPOPT= -DHAVE_MKSTEMP
++CAPOPT= -DHAVE_MKSTEMP -DHAVE_HYPOT
+ 
+ # Define the name of the executable file.
+ 
+@@ -143,7 +145,7 @@
  # some older JPEG streams that violate the standard. If the JPEG
  # library built from local sources, the patch will be applied.
  
@@ -51,7 +68,7 @@
  JPEG_NAME=jpeg
  
  # Define the directory where the PNG library sources are stored,
-@@ -158,7 +159,7 @@
+@@ -158,7 +160,7 @@
  # what its name is.
  # See gs.mak and Make.htm for more information.
  
@@ -60,7 +77,7 @@
  LIBPNG_NAME=png
  
  # Define the directory where the zlib sources are stored.
-@@ -170,7 +171,7 @@
+@@ -170,7 +172,7 @@
  # what its name is (usually libz, but sometimes libgz).
  # See gs.mak and Make.htm for more information.
  
@@ -69,7 +86,7 @@
  #ZLIB_NAME=gz
  ZLIB_NAME=z
  
-@@ -179,6 +180,14 @@
+@@ -179,6 +181,14 @@
  JBIG2_LIB=jbig2dec
  JBIG2SRCDIR=jbig2dec
  
@@ -84,7 +101,7 @@
  # Define the directory where the icclib source are stored.
  # See icclib.mak for more information
  
-@@ -202,7 +211,7 @@
+@@ -207,7 +217,7 @@
  
  # Define the name of the C compiler.
  
@@ -93,29 +110,30 @@
  
  # Define the name of the linker for the final link step.
  # Normally this is the same as the C compiler.
-@@ -219,9 +228,9 @@
+@@ -224,10 +234,10 @@
  # Define the added flags for standard, debugging, profiling 
  # and shared object builds.
  
 -CFLAGS_STANDARD=-O2
--CFLAGS_DEBUG=-g -O0
--CFLAGS_PROFILE=-pg -O2
 +CFLAGS_STANDARD?=-O2
-+CFLAGS_DEBUG=-g
-+CFLAGS_PROFILE=-pg
- CFLAGS_SO=-fPIC
+ CFLAGS_DEBUG=-g -O0
+ CFLAGS_PROFILE=-pg -O2
+-CFLAGS_SO=-fPIC -shared
++CFLAGS_SO=-fPIC
  
  # Define the other compilation flags.  Add at most one of the following:
-@@ -235,7 +244,7 @@
+ #	-DBSD4_2 for 4.2bsd systems.
+@@ -240,7 +250,8 @@
  # We don't include -ansi, because this gets in the way of the platform-
  #   specific stuff that <math.h> typically needs; nevertheless, we expect
  #   gcc to accept ANSI-style function prototypes and function definitions.
--XCFLAGS=
-+XCFLAGS+=-I${JPXSRCDIR}/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include
+-XCFLAGS=-DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"$(gssharedir)\"
++XCFLAGS+=-DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"$(gssharedir)\"
++XCFLAGS+=-DUPD_SIGNAL=0 -I${JPXSRCDIR}/src/libjasper/include -I${LOCALBASE}/include/libpng -I${LOCALBASE}/include
  
  CFLAGS=$(CFLAGS_STANDARD) $(GCFLAGS) $(XCFLAGS)
  
-@@ -246,7 +255,7 @@
+@@ -251,7 +262,7 @@
  #	-R /usr/local/xxx/lib:/usr/local/lib
  # giving the full path names of the shared library directories.
  # XLDFLAGS can be set from the command line.
@@ -124,7 +142,16 @@
  
  LDFLAGS=$(XLDFLAGS)
  
-@@ -279,7 +288,7 @@
+@@ -262,7 +273,7 @@
+ # Solaris may need -lnsl -lsocket -lposix4.
+ # (Libraries required by individual drivers are handled automatically.)
+ 
+-EXTRALIBS=-rdynamic -ldl
++EXTRALIBS+=-Wl,-export-dynamic
+ 
+ # Define the standard libraries to search at the end of linking.
+ # Most platforms require -lpthread for the POSIX threads library;
+@@ -284,7 +295,7 @@
  # Note that x_.h expects to find the header files in $(XINCLUDE)/X11,
  # not in $(XINCLUDE).
  
@@ -133,7 +160,7 @@
  
  # Define the directory/ies and library names for the X11 library files.
  # XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
-@@ -291,12 +300,12 @@
+@@ -296,12 +307,12 @@
  # Solaris and other SVR4 systems with dynamic linking probably want
  #XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
  # X11R6 (on any platform) may need
@@ -149,7 +176,7 @@
  
  # Define whether this platform has floating point hardware:
  #	FPU_TYPE=2 means floating point is faster than fixed point.
-@@ -314,16 +323,16 @@
+@@ -319,16 +330,16 @@
  
  # If POSIX sync primitives are used, also change the STDLIBS to include
  # the pthread library.
@@ -169,7 +196,16 @@
  #FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev
  # The following is strictly for testing.
  FEATURE_DEVS_ALL=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(PSD)double.dev $(PSD)trapping.dev $(PSD)stocht.dev $(GLD)pipe.dev
-@@ -447,6 +456,9 @@
+@@ -418,7 +429,7 @@
+ DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)xcf.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16m.dev $(DD)bmp32b.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev
+ 
+ # Shared library target to build.
+-GS_SHARED_OBJS=$(GLOBJDIR)/X11.so $(GLOBJDIR)/lvga256.so $(GLOBJDIR)/vgalib.so
++#GS_SHARED_OBJS=$(GLOBJDIR)/X11.so $(GLOBJDIR)/lvga256.so $(GLOBJDIR)/vgalib.so
+ #GS_SHARED_OBJS=$(GLOBJDIR)/X11.so
+ 
+ # ---------------------------- End of options --------------------------- #
+@@ -457,6 +468,9 @@
  include $(GLSRCDIR)/zlib.mak
  include $(GLSRCDIR)/libpng.mak
  include $(GLSRCDIR)/jbig2.mak
@@ -179,7 +215,7 @@
  include $(GLSRCDIR)/icclib.mak
  include $(GLSRCDIR)/ijs.mak
  include $(GLSRCDIR)/devs.mak
-@@ -456,6 +468,7 @@
+@@ -466,6 +480,7 @@
  include $(GLSRCDIR)/unix-dll.mak
  include $(GLSRCDIR)/unix-end.mak
  include $(GLSRCDIR)/unixinst.mak
diff --git a/print/ghostscript8/pkg-plist b/print/ghostscript8/pkg-plist
index e8cb4ee8bad8..e7cce6f79336 100644
--- a/print/ghostscript8/pkg-plist
+++ b/print/ghostscript8/pkg-plist
@@ -350,7 +350,6 @@ bin/wftopfa
 %%DATADIR%%/%%GS_VERSION%%/doc/Issues.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Language.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Lib.htm
-%%DATADIR%%/%%GS_VERSION%%/doc/Maintain.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Make.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/News.htm
 %%DATADIR%%/%%GS_VERSION%%/doc/Projects.htm
diff --git a/print/ghostscript8/scripts/configure b/print/ghostscript8/scripts/configure
index b2bf87c60391..2c35fafbb56e 100644
--- a/print/ghostscript8/scripts/configure
+++ b/print/ghostscript8/scripts/configure
@@ -75,6 +75,7 @@ else
 		gdi \
 		jj100 \
 		sj48 t4693d2 t4693d4 t4693d8 tek4696 \
+		xes \
 		bmpmono bmpgray bmp16 bmp256 bmp16m bmp32b bmpsep1 bmpsep8 \
 		ccr \
 		cgmmono cgm8 cgm24 \
@@ -96,7 +97,8 @@ else
 		tiffcrle tiffg3 tiffg32d tiffg4 tiffgray \
 		tiff12nc tiff24nc tiff32nc tiffsep tifflzw tiffpack \
 		bbox \
-		devicen perm spotcmyk
+		devicen perm spotcmyk \
+		imdi wtsimdi wtscmyk
 fi
 
 for i; do
@@ -402,6 +404,9 @@ Have fun with this new configuration style !     -andreas \n\n\
   "devicen"  "DeviceN process color model device" "$status_devicen" \
   "perm"     "DeviceN which permutes color components" "$status_perm" \
   "spotcmyk" "DeviceN with CMYK and spot color support" "$status_spotcmyk" \
+  "imdi"     "IMDI color converting device" "$status_imdi" \
+  "wtsimdi"  "WTS halftoning device" "$status_wtsimdi" \
+  "wtscmyk"  "WTS halftoning CMYK device" "$status_wtscmyk" \
 2> $tempfile
 
 	retval=$?