- Add OPTION to enable Kerberos/GSSAPI patch [1]

- Add OPTION to enable LPK patch (ldap stored public key) [2]

PR:		86384 [1], 103399 [2]
Submitted by:	Garrett Wollman <wollman___khavrinen.csail.mit.edu> [1], Dmitriy Kirhlarov <dkirhlarov___oilspace.com> [2]

3 files changed, 1850 insertions, 11 deletions

diff --git a/security/openssh-portable/Makefile b/security/openssh-portable/Makefile
index 868cbe37dcd5..d56a58976246 100644
--- a/security/openssh-portable/Makefile
+++ b/security/openssh-portable/Makefile
@@ -53,17 +53,19 @@ PORTABLE_SUFFIX=	-portable
 SUDO?=		# empty
 MAKE_ENV+=	SUDO="${SUDO}"
 
-OPTIONS=	PAM		"Enable pam(3) support"			on \
-		TCP_WRAPPERS	"Enable tcp_wrappers support"		on \
-		LIBEDIT		"Enable readline support to sftp(1)"	on \
-		KERBEROS	"Enable kerberos (autodetection)"	on \
-		SUID_SSH	"Enable suid SSH (Recommended off)"	off \
-		GSSAPI		"Enable GSSAPI support"			off \
-		OPENSSH_CHROOT	"Enable CHROOT support"			off \
-		OPENSC		"Enable OpenSC smartcard support"	off \
-		OPENSCPINPATCH	"Enable OpenSC PIN patch"		off \
-		HPN		"Enable HPN-SSH patch"			off \
-		OVERWRITE_BASE	"OpenSSH overwrite base"		off
+OPTIONS=	PAM		"Enable pam(3) support"				on \
+		TCP_WRAPPERS	"Enable tcp_wrappers support"			on \
+		LIBEDIT		"Enable readline support to sftp(1)"		on \
+		KERBEROS	"Enable kerberos (autodetection)"		on \
+		SUID_SSH	"Enable suid SSH (Recommended off)"		off \
+		GSSAPI		"Enable GSSAPI support (req: KERBEROS)"		off \
+		KERB_GSSAPI	"Enable Kerberos/GSSAPI patch (req: GSSAPI)"	off \
+		OPENSSH_CHROOT	"Enable CHROOT support"				off \
+		OPENSC		"Enable OpenSC smartcard support"		off \
+		OPENSCPINPATCH	"Enable OpenSC PIN patch"			off \
+		HPN		"Enable HPN-SSH patch"				off \
+		LPK		"Enable LDAP Public Key (LPK) patch"		off \
+		OVERWRITE_BASE	"OpenSSH overwrite base"			off
 
 .include <bsd.port.pre.mk>
 
@@ -97,6 +99,11 @@ CONFIGURE_ARGS+=	--disable-suid-ssh
 
 .if !defined(WITHOUT_KERBEROS)
 .if defined(KRB5_HOME) && exists(${KRB5_HOME}) || defined(WITH_GSSAPI)
+.if defined(WITH_KERB_GSSAPI)
+PATCH_DIST_STRIP=	-p0
+PATCH_SITES+=		http://www.sxw.org.uk/computing/patches/
+PATCHFILES+=		openssh-4.4p1-gsskex-20061002.patch
+.endif
 PORTABLE_SUFFIX=	# empty
 GSSAPI_SUFFIX=		-gssapi
 CONFLICTS+=		openssh-portable-*-[0-9]*
@@ -133,12 +140,25 @@ CONFIGURE_ARGS+=	--with-opensc=${LOCALBASE}
 EXTRA_PATCHES+=		${FILESDIR}/scardpin.patch
 .endif
 
+.if defined(WITH_HPN) && defined(WITH_LPK)
+BROKEN=			HPN and LPK patches are incompatible
+.endif
+
 .if defined(WITH_HPN)
 PATCH_DIST_STRIP=	-p1
 PATCH_SITES+=		http://www.psc.edu/networking/projects/hpn-ssh/
 PATCHFILES+=		openssh-4.4p1-hpn.diff.gz
 .endif
 
+.if defined(WITH_LPK)
+PATCH_DIST_STRIP=	-p0
+EXTRA_PATCHES+=		${FILESDIR}/openssh-lpk.patch
+USE_OPENLDAP=		yes
+CPPFLAGS+=		"-I${LOCALBASE}/include -DWITH_LDAP_PUBKEY"
+CONFIGURE_ARGS+=	--with-libs='-lldap' --with-ldflags='-L/usr/local/lib' \
+			--with-cppflags='-I/usr/local/include -DWITH_LDAP_PUBKEY'
+.endif
+
 .if defined(WITH_OVERWRITE_BASE)
 WITH_OPENSSL_BASE=	yes
 BASE_SUFFIX=		-overwrite-base
diff --git a/security/openssh-portable/distinfo b/security/openssh-portable/distinfo
index 571d1ec1a474..e27c1848bfb0 100644
--- a/security/openssh-portable/distinfo
+++ b/security/openssh-portable/distinfo
@@ -1,6 +1,12 @@
 MD5 (openssh-4.4p1.tar.gz) = 793a709a8de695c22f523024d7e9bf07
 SHA256 (openssh-4.4p1.tar.gz) = 0252474af4009129cde6a2df2893fb1ac24316436758796f6adc043ac73b35ac
 SIZE (openssh-4.4p1.tar.gz) = 1044334
+MD5 (openssh-4.4p1-gsskex-20061002.patch) = 61e8573f7192eb1ff26036f486db445a
+SHA256 (openssh-4.4p1-gsskex-20061002.patch) = cc21b7038589be27924bdc0ba163cf059ea1f0b7b65d0f8d7ddc015cac6d9ac4
+SIZE (openssh-4.4p1-gsskex-20061002.patch) = 69152
 MD5 (openssh-4.4p1-hpn.diff.gz) = d5f07fcb10360b52bdcacf3c7de803b6
 SHA256 (openssh-4.4p1-hpn.diff.gz) = 6febe17260ff66a8dbb7b466252889f855dcc5dec50c93eff25050839cf65977
 SIZE (openssh-4.4p1-hpn.diff.gz) = 16258
+MD5 (openssh-lpk-4.3p1-0.3.7.patch) = d9eacb819a73daddb3d21ca7aa8e5c25
+SHA256 (openssh-lpk-4.3p1-0.3.7.patch) = 0bcfa28804caf685de2248ddc966666196f6df81d1d058066f2da17714518af4
+SIZE (openssh-lpk-4.3p1-0.3.7.patch) = 60451
diff --git a/security/openssh-portable/files/openssh-lpk.patch b/security/openssh-portable/files/openssh-lpk.patch
new file mode 100644
index 000000000000..19c747d31fe6
--- /dev/null
+++ b/security/openssh-portable/files/openssh-lpk.patch
@@ -0,0 +1,1813 @@
+#
+# Based on 4.3p1-0.3.7 patch from http://www.opendarwin.org/en/projects/openssh-lpk/ 
+#
+--- Makefile.in.orig	Tue Sep 12 08:54:10 2006
++++ Makefile.in	Sat Oct  7 17:27:42 2006
+@@ -88,7 +88,7 @@
+ 	auth-krb5.o \
+ 	auth2-gss.o gss-serv.o gss-serv-krb5.o \
+ 	loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \
+-	audit.o audit-bsm.o platform.o
++	audit.o audit-bsm.o platform.o ldapauth.o
+ 
+ MANPAGES	= scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out sshd_config.5.out ssh_config.5.out
+ MANPAGES_IN	= scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 sshd_config.5 ssh_config.5
+--- README.lpk.orig	Sat Oct  7 17:26:32 2006
++++ README.lpk	Sat Oct  7 17:26:32 2006
+@@ -0,0 +1,265 @@
++OpenSSH LDAP PUBLIC KEY PATCH 
++Copyright (c) 2003 Eric AUGE (eau@phear.org)
++All rights reserved.
++
++Redistribution and use in source and binary forms, with or without
++modification, are permitted provided that the following conditions
++are met:
++1. Redistributions of source code must retain the above copyright
++   notice, this list of conditions and the following disclaimer.
++2. Redistributions in binary form must reproduce the above copyright
++   notice, this list of conditions and the following disclaimer in the
++   documentation and/or other materials provided with the distribution.
++3. The name of the author may not be used to endorse or promote products
++   derived from this software without specific prior written permission.
++
++THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++
++purposes of this patch:
++
++This patch would help to have authentication centralization policy
++using ssh public key authentication.
++This patch could be an alternative to other "secure" authentication system
++working in a similar way (Kerberos, SecurID, etc...), except the fact 
++that it's based on OpenSSH and its public key abilities.
++
++>> FYI: <<
++'uid': means unix accounts existing on the current server
++'lpkServerGroup:' mean server group configured on the current server ('lpkServerGroup' in sshd_config)
++
++example schema:
++
++
++                                  server1 (uid: eau,rival,toto) (lpkServerGroup: unix)
++                ___________      /
++               /           \ --- - server3 (uid: eau, titi) (lpkServerGroup: unix)
++              | LDAP Server |    \
++	      | eau  ,rival |     server2 (uid: rival, eau) (lpkServerGroup: unix)
++	      | titi ,toto  |
++	      | userx,....  |         server5 (uid: eau)  (lpkServerGroup: mail)
++               \___________/ \       /
++	                       ----- - server4 (uid: eau, rival)  (no group configured)
++			             \
++				        etc...
++
++- WHAT WE NEED :
++
++  * configured LDAP server somewhere on the network (i.e. OpenLDAP)
++  * patched sshd (with this patch ;)
++  * LDAP user(/group) entry (look at users.ldif (& groups.ldif)):
++        User entry:
++	- attached to the 'ldapPublicKey' objectclass
++	- attached to the 'posixAccount' objectclass
++	- with a filled 'sshPublicKey' attribute 
++	Example:
++		dn: uid=eau,ou=users,dc=cuckoos,dc=net
++		objectclass: top
++		objectclass: person
++		objectclass: organizationalPerson
++		objectclass: posixAccount
++		objectclass: ldapPublicKey
++		description: Eric AUGE Account
++		userPassword: blah
++		cn: Eric AUGE
++		sn: Eric AUGE
++		uid: eau
++		uidNumber: 1034
++		gidNumber: 1
++		homeDirectory: /export/home/eau
++		sshPublicKey: ssh-dss AAAAB3...
++		sshPublicKey: ssh-dss AAAAM5...
++
++	Group entry:
++	- attached to the 'posixGroup' objectclass
++	- with a 'cn' groupname attribute
++	- with multiple 'memberUid' attributes filled with usernames allowed in this group
++	Example:
++		# few members
++		dn: cn=unix,ou=groups,dc=cuckoos,dc=net
++		objectclass: top
++		objectclass: posixGroup
++		description: Unix based servers group
++		cn: unix
++		gidNumber: 1002
++		memberUid: eau
++		memberUid: user1
++		memberUid: user2
++
++
++- HOW IT WORKS :
++
++  * without patch
++  If a user wants to authenticate to log in a server the sshd, will first look for authentication method allowed (RSAauth,kerberos,etc..)
++  and if RSAauth and tickets based auth fails, it will fallback to standard password authentication (if enabled).
++
++  * with the patch
++  If a user want to authenticate to log in a server, the sshd will first look for auth method including LDAP pubkey, if the ldappubkey options is enabled.
++  It will do an ldapsearch to get the public key directly from the LDAP instead of reading it from the server filesystem. 
++  (usually in $HOME/.ssh/authorized_keys)
++
++  If groups are enabled, it will also check if the user that wants to login is in the group of the server he is trying to log into.
++  If it fails, it falls back on RSA auth files ($HOME/.ssh/authorized_keys), etc.. and finally to standard password authentication (if enabled).
++
++  7 tokens are added to sshd_config :
++  # here is the new patched ldap related tokens
++  # entries in your LDAP must be posixAccount & strongAuthenticationUser & posixGroup
++  UseLPK yes								# look the pub key into LDAP
++  LpkServers ldap://10.31.32.5/ ldap://10.31.32.4 ldap://10.31.32.3	# which LDAP server for users ? (URL format)
++  LpkUserDN  ou=users,dc=foobar,dc=net					# which base DN for users ?
++  LpkGroupDN ou=groups,dc=foobar,dc=net					# which base DN for groups ? 
++  LpkBindDN cn=manager,dc=foobar,dc=net					# which bind DN ?
++  LpkBindPw asecret							# bind DN credidentials
++  LpkServerGroup agroupname						# the group the server is part of
++
++  Right now i'm using anonymous binding to get public keys, because getting public keys of someone doesn't impersonate him¸ but there is some
++  flaws you have to take care of.
++
++- HOW TO INSERT A USER/KEY INTO AN LDAP ENTRY
++
++  * my way (there is plenty :)
++  - create ldif file (i.e. users.ldif)
++  - cat ~/.ssh/id_dsa.pub OR cat ~/.ssh/id_rsa.pub OR cat ~/.ssh/identity.pub
++  - my way in 4 steps :
++  Example:
++
++  # you add this to the user entry in the LDIF file :
++  [...]
++  objectclass: posixAccount
++  objectclass: ldapPublicKey
++  [...]
++  sshPubliKey: ssh-dss AAAABDh12DDUR2...
++  [...]
++
++  # insert your entry and you're done :)
++  ldapadd -D balblabla -w bleh < file.ldif 
++  
++  all standard options can be present in the 'sshPublicKey' attribute.
++
++- WHY :
++
++  Simply because, i was looking for a way to centralize all sysadmins authentication, easily,  without completely using LDAP 
++  as authentication method (like pam_ldap etc..).  
++  
++  After looking into Kerberos, SecurID, and other centralized secure authentications systems, the use of RSA and LDAP to get 
++  public key for authentication allows us to control who has access to which server (the user needs an account and to be in 'strongAuthenticationUser'
++  objectclass within LDAP and part of the group the SSH server is in). 
++
++  Passwords update are no longer a nightmare for a server farm (key pair passphrase is stored on each user's box and private key is locally encrypted using his passphrase 
++  so each user can change it as much as he wants). 
++
++  Blocking a user account can be done directly from the LDAP (if sshd is using RSAAuth + ldap only).
++
++- RULES :  
++  Entry in the LDAP server must respect 'posixAccount' and 'ldapPublicKey' which are defined in core.schema. 
++  and the additionnal lpk.schema.
++
++  This patch could allow a smooth transition between standard auth (/etc/passwd) and complete LDAP based authentication 
++  (pamldap, nss_ldap, etc..).
++
++  This can be an alternative to other (old?/expensive?) authentication methods (Kerberos/SecurID/..).
++  
++  Referring to schema at the beginning of this file if user 'eau' is only in group 'unix'
++  'eau' would ONLY access 'server1', 'server2', 'server3' AND 'server4' BUT NOT 'server5'.
++  If you then modify the LDAP 'mail' group entry to add 'memberUid: eau' THEN user 'eau' would be able
++  to log in 'server5' (i hope you got the idea, my english is bad :).
++
++  Each server's sshd is patched and configured to ask the public key and the group infos in the LDAP
++  server.
++  When you want to allow a new user to have access to the server parc, you just add him an account on 
++  your servers, you add his public key into his entry on the LDAP server, it's done. 
++
++  Because sshds are looking public keys into the LDAP directly instead of a file ($HOME/.ssh/authorized_keys).
++
++  When the user needs to change his passphrase he can do it directly from his workstation by changing 
++  his own key set lock passphrase, and all servers are automatically aware.
++ 
++  With a CAREFUL LDAP server configuration you could allow a user to add/delete/modify his own entry himself
++  so he can add/modify/delete himself his public key when needed.
++
++­ FLAWS :
++  LDAP must be well configured, getting the public key of some user is not a problem, but if anonymous LDAP 
++  allow write to users dn, somebody could replace someuser's public key by its own and impersonate some 
++  of your users in all your server farm be VERY CAREFUL.
++  
++  MITM attack when sshd is requesting the public key, could lead to a compromise of your servers allowing login 
++  as the impersonnated user.
++
++  If LDAP server is down then, fallback on passwd auth.
++  
++  the ldap code part has not been well audited yet.
++
++- LDAP USER ENTRY EXAMPLES (LDIF Format, look in users.ldif)
++    --- CUT HERE ---
++    dn: uid=jdoe,ou=users,dc=foobar,dc=net
++    objectclass: top
++    objectclass: person
++    objectclass: organizationalPerson
++    objectclass: posixAccount
++    objectclass: ldapPublicKey
++    description: My account
++    cn: John Doe
++    sn: John Doe
++    uid: jdoe
++    uidNumber: 100
++    gidNumber: 100
++    homeDirectory: /home/jdoe
++    sshPublicKey: ssh-dss AAAAB3NzaC1kc3MAAAEBAOvL8pREUg9wSy/8+hQJ54YF3AXkB0OZrXB....
++    [...]
++    --- CUT HERE ---
++
++- LDAP GROUP ENTRY EXAMPLES (LDIF Format, look in groups.ldif)
++    --- CUT HERE ---
++    dn: cn=unix,ou=groups,dc=cuckoos,dc=net
++    objectclass: top
++    objectclass: posixGroup
++    description: Unix based servers group
++    cn: unix
++    gidNumber: 1002
++    memberUid: jdoe
++    memberUid: user1
++    memberUid: user2
++    [...]
++    --- CUT HERE ---
++
++>> FYI: << 
++Multiple 'sshPublicKey' in a user entry are allowed, as well as multiple 'memberUid' attributes in a group entry
++
++- COMPILING:
++  1. Apply the patch
++  2. ./configure --with-your-options --with-ldap=/prefix/to/ldap_libs_and_includes
++  3. make
++  4. it's done.
++
++- BLA :
++  I hope this could help, and i hope to be clear enough,, or give ideas.  questions/comments/improvements are welcome.
++  
++- TODO :
++  Redesign differently.
++
++- DOCS/LINK :
++  http://pacsec.jp/core05/psj05-barisani-en.pdf
++  http://fritz.potsdam.edu/projects/openssh-lpk/
++  http://fritz.potsdam.edu/projects/sshgate/
++  http://www.opendarwin.org/projects/openssh-lpk/files/examples/lpk-usrdoc.txt
++  http://lam.sf.net/ ( http://lam.sourceforge.net/documentation/supportedSchemas.htm )
++
++- CONTRIBUTORS/IDEAS/GREETS :
++  - Falk Siemonsmeier -> 3.7 patch port candidate
++  - Jacob Rief -> ideas (group && cleanups)
++  - Michael.Durchgraf@dregis.com -> Bugfixes thanks ;)
++  - frederic.peters@free.fr -> X509 keys LDAP patch (old)
++  - oink -> bugfixes
++  - finlay dobbie -> new fresh start with this guy :)
++
++- CONTACT :
++  - Eric AUGE <eau@phear.org>, <eau@opendarwin.org>
++  - Andrea Barisani <lcars@opendarwin.org>
+--- auth-rsa.c.orig	Fri Sep  1 02:38:36 2006
++++ auth-rsa.c	Sat Oct  7 17:26:32 2006
+@@ -173,10 +173,96 @@
+ 	u_long linenum = 0;
+ 	struct stat st;
+ 	Key *key;
++#ifdef WITH_LDAP_PUBKEY
++	ldap_key_t * k;
++	unsigned int i = 0;
++#endif
+ 
+ 	/* Temporarily use the user's uid. */
+ 	temporarily_use_uid(pw);
+ 
++#ifdef WITH_LDAP_PUBKEY
++	/* here is the job */
++	key = key_new(KEY_RSA1);
++
++	if (options.lpk.on) {
++	    debug("[LDAP] trying LDAP first uid=%s", pw->pw_name);
++	    if ( ldap_ismember(&options.lpk, pw->pw_name) > 0) {
++		if ( (k = ldap_getuserkey(&options.lpk, pw->pw_name)) != NULL) {
++		    for (i = 0 ; i < k->num ; i++) {
++			char *cp, *options = NULL;
++
++			for (cp = k->keys[i]->bv_val; *cp == ' ' || *cp == '\t'; cp++)
++			    ;
++			if (!*cp || *cp == '\n' || *cp == '#')
++			    continue;
++
++			/*
++			* Check if there are options for this key, and if so,
++			* save their starting address and skip the option part
++			* for now.  If there are no options, set the starting
++			* address to NULL.
++			 */
++			if (*cp < '0' || *cp > '9') {
++			    int quoted = 0;
++			    options = cp;
++			    for (; *cp && (quoted || (*cp != ' ' && *cp != '\t')); cp++) {
++				if (*cp == '\\' && cp[1] == '"')
++				    cp++;	/* Skip both */
++				else if (*cp == '"')
++				    quoted = !quoted;
++			    }
++			} else
++			    options = NULL;
++
++			/* Parse the key from the line. */
++			if (hostfile_read_key(&cp, &bits, key) == 0) {
++			    debug("[LDAP] line %d: non ssh1 key syntax", i);
++			    continue;
++			}
++			/* cp now points to the comment part. */
++
++			/* Check if the we have found the desired key (identified by its modulus). */
++			if (BN_cmp(key->rsa->n, client_n) != 0)
++			    continue;
++
++			/* check the real bits  */
++			if (bits != (unsigned int)BN_num_bits(key->rsa->n))
++			    logit("[LDAP] Warning: ldap, line %lu: keysize mismatch: "
++				    "actual %d vs. announced %d.", (unsigned long)i, BN_num_bits(key->rsa->n), bits);
++
++			/* We have found the desired key. */
++			/*
++			* If our options do not allow this key to be used,
++			* do not send challenge.
++			 */
++			if (!auth_parse_options(pw, options, "[LDAP]", (unsigned long) i))
++			    continue;
++
++			/* break out, this key is allowed */
++			allowed = 1;
++
++			/* add the return stuff etc... */
++			/* Restore the privileged uid. */
++			restore_uid();
++
++			/* return key if allowed */
++			if (allowed && rkey != NULL)
++			    *rkey = key;
++			else
++			    key_free(key);
++
++			ldap_keys_free(k);
++			return (allowed);
++		    }
++		} else {
++		    logit("[LDAP] no keys found for '%s'!", pw->pw_name);
++		}
++	    } else {
++		logit("[LDAP] '%s' is not in '%s'", pw->pw_name, options.lpk.sgroup);
++	    }
++	}
++#endif
+ 	/* The authorized keys. */
+ 	file = authorized_keys_file(pw);
+ 	debug("trying public RSA key file %s", file);
+--- auth2-pubkey.c.orig	Fri Aug  4 23:39:39 2006
++++ auth2-pubkey.c	Sat Oct  7 17:26:32 2006
+@@ -53,6 +53,10 @@
+ #include "monitor_wrap.h"
+ #include "misc.h"
+ 
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ /* import */
+ extern ServerOptions options;
+ extern u_char *session_id2;
+@@ -186,10 +190,79 @@
+ 	struct stat st;
+ 	Key *found;
+ 	char *fp;
++#ifdef WITH_LDAP_PUBKEY
++	ldap_key_t * k;
++	unsigned int i = 0;
++#endif
+ 
+ 	/* Temporarily use the user's uid. */
+ 	temporarily_use_uid(pw);
+ 
++#ifdef WITH_LDAP_PUBKEY
++ 	found_key = 0;
++ 	/* allocate a new key type */
++ 	found = key_new(key->type);
++ 
++ 	/* first check if the options is enabled, then try.. */
++	if (options.lpk.on) {
++	    debug("[LDAP] trying LDAP first uid=%s",pw->pw_name);
++	    if (ldap_ismember(&options.lpk, pw->pw_name) > 0) {
++		if ((k = ldap_getuserkey(&options.lpk, pw->pw_name)) != NULL) {
++		    /* Skip leading whitespace, empty and comment lines. */
++		    for (i = 0 ; i < k->num ; i++) {
++			/* dont forget if multiple keys to reset options */
++			char *cp, *options = NULL;
++
++			for (cp = (char *)k->keys[i]->bv_val; *cp == ' ' || *cp == '\t'; cp++)
++			    ;
++			if (!*cp || *cp == '\n' || *cp == '#')
++			    continue;
++
++			if (key_read(found, &cp) != 1) {
++			    /* no key?  check if there are options for this key */
++			    int quoted = 0;
++			    debug2("[LDAP] user_key_allowed: check options: '%s'", cp);
++			    options = cp;
++			    for (; *cp && (quoted || (*cp != ' ' && *cp != '\t')); cp++) {
++				if (*cp == '\\' && cp[1] == '"')
++				    cp++;	/* Skip both */
++				else if (*cp == '"')
++				    quoted = !quoted;
++			    }
++			    /* Skip remaining whitespace. */
++			    for (; *cp == ' ' || *cp == '\t'; cp++)
++				;
++			    if (key_read(found, &cp) != 1) {
++				debug2("[LDAP] user_key_allowed: advance: '%s'", cp);
++				/* still no key?  advance to next line*/
++				continue;
++			    }
++			}
++
++			if (key_equal(found, key) &&
++				auth_parse_options(pw, options, file, linenum) == 1) {
++			    found_key = 1;
++			    debug("[LDAP] matching key found");
++			    fp = key_fingerprint(found, SSH_FP_MD5, SSH_FP_HEX);
++			    verbose("[LDAP] Found matching %s key: %s", key_type(found), fp);
++
++			    /* restoring memory */
++			    ldap_keys_free(k);
++			    xfree(fp);
++			    restore_uid();
++			    key_free(found);
++			    return found_key;
++			    break;
++			}
++		    }/* end of LDAP for() */
++		} else {
++		    logit("[LDAP] no keys found for '%s'!", pw->pw_name);
++		}
++	    } else {
++		logit("[LDAP] '%s' is not in '%s'", pw->pw_name, options.lpk.sgroup);
++	    }
++	}
++#endif
+ 	debug("trying public key file %s", file);
+ 
+ 	/* Fail quietly if file does not exist */
+--- config.h.in.orig	Tue Sep 26 08:03:33 2006
++++ config.h.in	Sat Oct  7 17:26:32 2006
+@@ -510,6 +510,9 @@
+ /* Define to 1 if you have the <linux/if_tun.h> header file. */
+ #undef HAVE_LINUX_IF_TUN_H
+ 
++/* Define if you want LDAP support */
++#undef WITH_LDAP_PUBKEY
++
+ /* Define if your libraries define login() */
+ #undef HAVE_LOGIN
+ 
+--- configure.orig	Tue Sep 26 08:03:41 2006
++++ configure	Sat Oct  7 17:28:35 2006
+@@ -1327,6 +1327,7 @@
+   --with-audit=module     Enable EXPERIMENTAL audit support (modules=debug,bsm)
+   --with-ssl-dir=PATH     Specify path to OpenSSL installation
+   --with-ssl-engine       Enable OpenSSL (hardware) ENGINE support
++  --with-ldap[=PATH]      Enable LDAP support (optionally in PATH)
+   --with-pam              Enable PAM support
+   --with-rand-helper      Use subprocess to gather strong randomness
+   --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
+@@ -11267,6 +11268,88 @@
+   echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+ 
++# Check whether user wants LDAP support
++LDAP_MSG="no"
++
++# Check whether --with-ldap or --without-ldap was given.
++if test "${with_ldap+set}" = set; then
++  withval="$with_ldap"
++
++		if test "x$withval" != "xno" ; then
++
++			if test "x$withval" != "xyes" ; then
++				CPPFLAGS="$CPPFLAGS -I${withval}/include"
++				LDFLAGS="$LDFLAGS -L${withval}/lib"
++			fi
++
++			cat >>confdefs.h <<\_ACEOF
++#define WITH_LDAP_PUBKEY 1
++_ACEOF
++
++			LIBS="-lldap $LIBS"
++			LDAP_MSG="yes"
++
++			echo "$as_me:$LINENO: checking for LDAP support" >&5
++echo $ECHO_N "checking for LDAP support... $ECHO_C" >&6
++			cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <sys/types.h>
++				 #include <ldap.h>
++int
++main ()
++{
++(void)ldap_init(0, 0);
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"
++			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++
++				    echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++					{ { echo "$as_me:$LINENO: error: ** Incomplete or missing ldap libraries **" >&5
++echo "$as_me: error: ** Incomplete or missing ldap libraries **" >&2;}
++   { (exit 1); exit 1; }; }
++
++
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++		fi
++
++
++fi;
++
+ 
+ 				{ { echo "$as_me:$LINENO: error: *** zlib missing - please install first or check config.log ***" >&5
+ echo "$as_me: error: *** zlib missing - please install first or check config.log ***" >&2;}
+@@ -33408,6 +33491,7 @@
+ echo "                 Smartcard support: $SCARD_MSG"
+ echo "                     S/KEY support: $SKEY_MSG"
+ echo "              TCP Wrappers support: $TCPW_MSG"
++echo "                      LDAP support: $LDAP_MSG"
+ echo "              MD5 password support: $MD5_MSG"
+ echo "                   libedit support: $LIBEDIT_MSG"
+ echo "  Solaris process contract support: $SPC_MSG"
+--- configure.ac.orig	Sun Sep 24 16:08:59 2006
++++ configure.ac	Sat Oct  7 17:26:32 2006
+@@ -1218,6 +1218,37 @@
+ 	esac ]
+ )
+ 
++# Check whether user wants LDAP support
++LDAP_MSG="no"
++AC_ARG_WITH(ldap,
++	[  --with-ldap[[=PATH]]      Enable LDAP support (optionally in PATH)],
++	[
++		if test "x$withval" != "xno" ; then
++
++			if test "x$withval" != "xyes" ; then
++				CPPFLAGS="$CPPFLAGS -I${withval}/include"
++				LDFLAGS="$LDFLAGS -L${withval}/lib"
++			fi
++
++			AC_DEFINE(WITH_LDAP_PUBKEY)
++			LIBS="-lldap $LIBS"
++			LDAP_MSG="yes"
++	
++			AC_MSG_CHECKING([for LDAP support])
++			AC_TRY_COMPILE(
++				[#include <sys/types.h>
++				 #include <ldap.h>],
++				[(void)ldap_init(0, 0);],
++				[AC_MSG_RESULT(yes)],
++				[
++				    AC_MSG_RESULT(no) 
++					AC_MSG_ERROR([** Incomplete or missing ldap libraries **])
++				]
++        	)
++		fi
++	]
++)
++
+ dnl    Checks for library functions. Please keep in alphabetical order
+ AC_CHECK_FUNCS( \
+ 	arc4random \
+@@ -3966,6 +3997,7 @@
+ echo "                 Smartcard support: $SCARD_MSG"
+ echo "                     S/KEY support: $SKEY_MSG"
+ echo "              TCP Wrappers support: $TCPW_MSG"
++echo "                      LDAP support: $LDAP_MSG"
+ echo "              MD5 password support: $MD5_MSG"
+ echo "                   libedit support: $LIBEDIT_MSG"
+ echo "  Solaris process contract support: $SPC_MSG"
+--- ldapauth.c.orig	Sat Oct  7 17:26:32 2006
++++ ldapauth.c	Sat Oct  7 17:26:32 2006
+@@ -0,0 +1,547 @@
++/* 
++ * $Id: openssh-lpk-4.3p1-0.3.7.patch,v 1.3 2006/04/18 15:29:09 eau Exp $
++ */
++
++/*
++ *
++ * Copyright (c) 2005, Eric AUGE <eau@phear.org>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
++ *
++ * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
++ * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
++ * Neither the name of the phear.org nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 
++ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
++ * IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
++ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
++ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *
++ */
++
++#include "includes.h"
++
++#ifdef WITH_LDAP_PUBKEY
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <string.h>
++
++#include "ldapauth.h"
++#include "log.h"
++
++static char *attrs[] = {
++    PUBKEYATTR,
++    NULL
++};
++
++/* filter building infos */
++#define FILTER_GROUP_PREFIX "(&(objectclass=posixGroup)"
++#define FILTER_OR_PREFIX "(|"
++#define FILTER_OR_SUFFIX ")"
++#define FILTER_CN_PREFIX "(cn="
++#define FILTER_CN_SUFFIX ")"
++#define FILTER_UID_FORMAT "(memberUid=%s)"
++#define FILTER_GROUP_SUFFIX ")"
++#define FILTER_GROUP_SIZE(group) (size_t) (strlen(group)+(ldap_count_group(group)*5)+52)
++
++/* just filter building stuff */
++#define REQUEST_GROUP_SIZE(filter, uid) (size_t) (strlen(filter)+strlen(uid)+1)
++#define REQUEST_GROUP(buffer, prefilter, pwname) \
++    buffer = (char *) calloc(REQUEST_GROUP_SIZE(prefilter, pwname), sizeof(char)); \
++    if (!buffer) { \
++        perror("calloc()"); \
++        return FAILURE; \
++    } \
++    snprintf(buffer, REQUEST_GROUP_SIZE(prefilter,pwname), prefilter, pwname)
++/*
++XXX OLD group building macros
++#define REQUEST_GROUP_SIZE(grp, uid) (size_t) (strlen(grp)+strlen(uid)+46)
++#define REQUEST_GROUP(buffer,pwname,grp) \
++    buffer = (char *) calloc(REQUEST_GROUP_SIZE(grp, pwname), sizeof(char)); \
++    if (!buffer) { \
++        perror("calloc()"); \
++        return FAILURE; \
++    } \
++    snprintf(buffer,REQUEST_GROUP_SIZE(grp,pwname),"(&(objectclass=posixGroup)(cn=%s)(memberUid=%s))",grp,pwname)
++    */
++
++#define REQUEST_USER_SIZE(uid) (size_t) (strlen(uid)+64)
++#define REQUEST_USER(buffer, pwname) \
++    buffer = (char *) calloc(REQUEST_USER_SIZE(pwname), sizeof(char)); \
++    if (!buffer) { \
++        perror("calloc()"); \
++        return NULL; \
++    } \
++    snprintf(buffer,REQUEST_USER_SIZE(pwname),"(&(objectclass=posixAccount)(objectclass=ldapPublicKey)(uid=%s))",pwname)
++
++/* some portable and working tokenizer, lame though */
++static int tokenize(char ** o, size_t size, char * input) {
++    unsigned int i = 0, num;
++    char * charset = " \t";
++    char * ptr = input;
++
++    /* leading white spaces are ignored */
++    num = strspn(ptr, charset);
++    ptr += num;
++
++    while ((num = strcspn(ptr, charset))) {
++        if (i < size-1) {
++            o[i++] = ptr;
++            ptr += num;
++            if (*ptr)
++                *ptr++ = '\0';
++        }
++    }
++    o[i] = NULL;
++    return SUCCESS;
++}
++
++void ldap_close(ldap_opt_t * ldap) {
++
++    if (!ldap)
++        return;
++
++    if ( ldap_unbind_ext(ldap->ld, NULL, NULL) < 0)
++	ldap_perror(ldap->ld, "ldap_unbind()");
++
++    ldap->ld = NULL;
++    FLAG_SET_DISCONNECTED(ldap->flags);
++
++    return;
++}
++
++/* init && bind */
++int ldap_connect(ldap_opt_t * ldap) {
++    int version = LDAP_VERSION3;
++
++    if (!ldap->servers)
++        return FAILURE;
++
++    /* Connection Init and setup */
++    ldap->ld = ldap_init(ldap->servers, LDAP_PORT);
++    if (!ldap->ld) {
++        ldap_perror(ldap->ld, "ldap_init()");
++        return FAILURE;
++    }
++
++    if ( ldap_set_option(ldap->ld, LDAP_OPT_PROTOCOL_VERSION, &version) != LDAP_OPT_SUCCESS) {
++        ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_PROTOCOL_VERSION)");
++        return FAILURE;
++    }
++
++    /* Timeouts setup */
++    if (ldap_set_option(ldap->ld, LDAP_OPT_NETWORK_TIMEOUT, &ldap->b_timeout) != LDAP_SUCCESS) {
++        ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT)");
++    }
++    if (ldap_set_option(ldap->ld, LDAP_OPT_TIMEOUT, &ldap->s_timeout) != LDAP_SUCCESS) {
++        ldap_perror(ldap->ld, "ldap_set_option(LDAP_OPT_TIMEOUT)");
++    }
++
++    /* TLS support */
++    if ( (ldap->tls == -1) || (ldap->tls == 1) ) {
++        if (ldap_start_tls_s(ldap->ld, NULL, NULL ) != LDAP_SUCCESS) {
++            /* failed then reinit the initial connect */
++            ldap_perror(ldap->ld, "ldap_connect: (TLS) ldap_start_tls()");
++            if (ldap->tls == 1)
++                return FAILURE;
++
++            ldap->ld = ldap_init(ldap->servers, LDAP_PORT);
++            if (!ldap->ld) { 
++                ldap_perror(ldap->ld, "ldap_init()");
++                return FAILURE;
++            }
++
++            if ( ldap_set_option(ldap->ld, LDAP_OPT_PROTOCOL_VERSION, &version) != LDAP_OPT_SUCCESS) {
++                 ldap_perror(ldap->ld, "ldap_set_option()");
++                 return FAILURE;
++            }
++        }
++    }
++
++
++    if ( ldap_simple_bind_s(ldap->ld, ldap->binddn, ldap->bindpw) != LDAP_SUCCESS) {
++        ldap_perror(ldap->ld, "ldap_simple_bind_s()");
++        return FAILURE;
++    }
++
++    /* says it is connected */
++    FLAG_SET_CONNECTED(ldap->flags);
++
++    return SUCCESS;
++}
++
++/* must free allocated ressource */
++static char * ldap_build_host(char *host, int port) {
++    unsigned int size = strlen(host)+11;
++    char * h = (char *) calloc (size, sizeof(char));
++    int rc;
++    if (!h)
++         return NULL;
++
++    rc = snprintf(h, size, "%s:%d ", host, port);
++    if (rc == -1)
++        return NULL;
++    return h;
++}
++
++static int ldap_count_group(char * input) {
++    char * charset = " \t";
++    char * ptr = input;
++    unsigned int count = 0;
++    unsigned int num;
++
++    num = strspn(ptr, charset);
++    ptr += num;
++
++    while ((num = strcspn(ptr, charset))) {
++    count++;
++    ptr += num;
++    ptr++;
++    }
++
++    return count;
++}
++
++/* format filter */
++char * ldap_parse_groups(char * groups) {
++    unsigned int buffer_size = FILTER_GROUP_SIZE(groups);
++    char * buffer = (char *) calloc(buffer_size, sizeof(char));
++    char * g = NULL;
++    char * garray[32];
++    unsigned int i = 0;
++
++    if ((!groups)||(!buffer))
++        return NULL;
++
++    g = strdup(groups);
++    if (!g) {
++        free(buffer);
++        return NULL;
++    }
++
++    /* first separate into n tokens */
++    if ( tokenize(garray, sizeof(garray)/sizeof(*garray), g) < 0) {
++        free(g);
++        free(buffer);
++        return NULL;
++    }
++
++    /* build the final filter format */
++    strlcat(buffer, FILTER_GROUP_PREFIX, buffer_size);
++    strlcat(buffer, FILTER_OR_PREFIX, buffer_size);
++    i = 0;
++    while (garray[i]) {
++        strlcat(buffer, FILTER_CN_PREFIX, buffer_size);
++        strlcat(buffer, garray[i], buffer_size);
++        strlcat(buffer, FILTER_CN_SUFFIX, buffer_size);
++        i++;
++    }
++    strlcat(buffer, FILTER_OR_SUFFIX, buffer_size);
++    strlcat(buffer, FILTER_UID_FORMAT, buffer_size);
++    strlcat(buffer, FILTER_GROUP_SUFFIX, buffer_size);
++
++    free(g);
++    return buffer;
++}
++
++/* a bit dirty but leak free  */
++char * ldap_parse_servers(char * servers) {
++    char * s = NULL;
++    char * tmp = NULL, *urls[32];
++    unsigned int num = 0 , i = 0 , asize = 0;
++    LDAPURLDesc *urld[32];
++
++    if (!servers)
++        return NULL;
++
++    /* local copy of the arg */
++    s = strdup(servers);
++    if (!s)
++        return NULL;
++
++    /* first separate into URL tokens */
++    if ( tokenize(urls, sizeof(urls)/sizeof(*urls), s) < 0)
++        return NULL;
++
++    i = 0;
++    while (urls[i]) {
++        if ( ldap_is_ldap_url(urls[i]) ) {
++            if (ldap_url_parse(urls[i], &urld[i]) != 0)
++                return NULL;
++        }
++        i++;
++    }
++
++    /* now free(s) */
++    free (s);
++
++    /* how much memory do we need */
++    num = i;
++    for (i = 0 ; i < num ; i++)
++        asize += strlen(urld[i]->lud_host)+11;
++
++    /* alloc */
++    s = (char *) calloc( asize+1 , sizeof(char));
++    if (!s) {
++        for (i = 0 ; i < num ; i++)
++            ldap_free_urldesc(urld[i]);
++        return NULL;
++    }
++
++    /* then build the final host string */
++    for (i = 0 ; i < num ; i++) {
++        /* built host part */
++        tmp = ldap_build_host(urld[i]->lud_host, urld[i]->lud_port);
++        strncat(s, tmp, strlen(tmp));
++        ldap_free_urldesc(urld[i]);
++        free(tmp);
++    }
++
++    return s;
++}
++
++void ldap_options_print(ldap_opt_t * ldap) {
++    printf("ldap options:\n");
++    printf("servers: %s\n", ldap->servers);
++    if (ldap->u_basedn)
++        printf("user basedn: %s\n", ldap->u_basedn);
++    if (ldap->g_basedn)
++        printf("group basedn: %s\n", ldap->g_basedn);
++    if (ldap->binddn)
++        printf("binddn: %s\n", ldap->binddn);
++    if (ldap->bindpw)
++        printf("bindpw: %s\n", ldap->bindpw);
++    if (ldap->sgroup)
++        printf("group: %s\n", ldap->sgroup);
++}
++
++void ldap_options_free(ldap_opt_t * l) {
++    if (!l)
++        return;
++    if (l->servers)
++        free(l->servers);
++    if (l->u_basedn)
++        free(l->u_basedn);
++    if (l->g_basedn)
++        free(l->g_basedn);
++    if (l->binddn)
++        free(l->binddn);
++    if (l->bindpw)
++        free(l->bindpw);
++    if (l->sgroup)
++        free(l->sgroup);
++    if (l->fgroup)
++        free(l->fgroup);
++    if (l->l_conf)
++        free(l->l_conf);
++    free(l);
++}
++
++/* free keys */
++void ldap_keys_free(ldap_key_t * k) {
++    ldap_value_free_len(k->keys);
++    free(k);
++    return;
++}
++
++ldap_key_t * ldap_getuserkey(ldap_opt_t *l, char * user) {
++    ldap_key_t * k = (ldap_key_t *) calloc (1, sizeof(ldap_key_t));
++    LDAPMessage *res, *e;
++    char * filter;
++    int i;
++
++    if ((!k) || (!l))
++         return NULL;
++
++    /* Am i still connected ? RETRY n times */
++    /* XXX TODO: setup some conf value for retrying */
++    if (!(l->flags & FLAG_CONNECTED))
++        for (i = 0 ; i < 2 ; i++)
++            if (ldap_connect(l) == 0)
++                break;
++
++    /* build  filter for LDAP request */
++    REQUEST_USER(filter, user);
++
++    if ( ldap_search_st( l->ld,
++        l->u_basedn,
++        LDAP_SCOPE_SUBTREE,
++        filter,
++        attrs, 0, &l->s_timeout, &res ) != LDAP_SUCCESS) {
++        
++        ldap_perror(l->ld, "ldap_search_st()");
++
++        free(filter);
++        free(k);
++
++        /* XXX error on search, timeout etc.. close ask for reconnect */
++        ldap_close(l);
++
++        return NULL;
++    } 
++
++    /* free */
++    free(filter);
++
++    /* check if any results */
++    i = ldap_count_entries(l->ld,res);
++    if (i <= 0) {
++        ldap_msgfree(res);
++        free(k);
++        return NULL;
++    }
++
++    if (i > 1)
++        printf("[LDAP] duplicate entries, using the FIRST entry returned\n");
++
++    e = ldap_first_entry(l->ld, res);
++    k->keys = ldap_get_values_len(l->ld, e, PUBKEYATTR);
++    k->num = ldap_count_values_len(k->keys);
++
++    ldap_msgfree(res);
++    return k;
++}
++
++
++/* -1 if trouble
++   0 if user is NOT member of current server group
++   1 if user IS MEMBER of current server group 
++ */
++int ldap_ismember(ldap_opt_t * l, char * user) {
++    LDAPMessage *res;
++    char * filter;
++    int i;
++
++    if ((!l->sgroup) || !(l->g_basedn))
++        return 1;
++
++    /* Am i still connected ? RETRY n times */
++    /* XXX TODO: setup some conf value for retrying */
++    if (!(l->flags & FLAG_CONNECTED)) 
++        for (i = 0 ; i < 2 ; i++)
++            if (ldap_connect(l) == 0)
++                 break;
++
++    /* build filter for LDAP request */
++    REQUEST_GROUP(filter, l->fgroup, user);
++
++    if (ldap_search_st( l->ld, 
++        l->g_basedn,
++        LDAP_SCOPE_SUBTREE,
++        filter,
++        NULL, 0, &l->s_timeout, &res) != LDAP_SUCCESS) {
++    
++        ldap_perror(l->ld, "ldap_search_st()");
++
++        free(filter);
++
++        /* XXX error on search, timeout etc.. close ask for reconnect */
++        ldap_close(l);
++
++        return FAILURE;
++    }
++
++    free(filter);
++
++    /* check if any results */
++    if (ldap_count_entries(l->ld, res) > 0) {
++        ldap_msgfree(res);
++        return 1;
++    }
++
++    ldap_msgfree(res);
++    return 0;
++}
++
++/*
++ * ldap.conf simple parser
++ * XXX TODO:  sanity checks
++ * must either
++ * - free the previous ldap_opt_before replacing entries
++ * - free each necessary previously parsed elements
++ * ret:
++ * -1 on FAILURE, 0 on SUCCESS
++ */
++int ldap_parse_lconf(ldap_opt_t * l) {
++    FILE * lcd; /* ldap.conf descriptor */
++    char buf[BUFSIZ];
++    char * s = NULL, * k = NULL, * v = NULL;
++    int li, len;
++
++    lcd = fopen (l->l_conf, "r");
++    if (lcd == NULL) {
++        /* debug("Cannot open %s", l->l_conf); */
++        perror("ldap_parse_lconf()");
++        return FAILURE;
++    }
++    
++    while (fgets (buf, sizeof (buf), lcd) != NULL) {
++
++        if (*buf == '\n' || *buf == '#')
++            continue;
++
++        k = buf;
++        v = k;
++        while (*v != '\0' && *v != ' ' && *v != '\t')
++            v++;
++
++        if (*v == '\0')
++            continue;
++
++        *(v++) = '\0';
++
++        while (*v == ' ' || *v == '\t')
++            v++;
++
++        li = strlen (v) - 1;
++        while (v[li] == ' ' || v[li] == '\t' || v[li] == '\n')
++            --li;
++        v[li + 1] = '\0';
++
++        if (!strcasecmp (k, "uri")) {
++            if ((l->servers = ldap_parse_servers(strdup (v))) == NULL) {
++                fatal("error in ldap servers");
++            return FAILURE;
++            }
++
++        }
++        else if (!strcasecmp (k, "base")) { 
++            s = strchr (v, '?');
++            if (s != NULL) {
++                len = s - v;
++                l->u_basedn = malloc (len + 1);
++                strncpy (l->u_basedn, v, len);
++                l->u_basedn[len] = '\0';
++            } else {
++                l->u_basedn = strdup (v);
++            }
++        }
++        else if (!strcasecmp (k, "binddn")) {
++            l->binddn = strdup (v);
++        }
++        else if (!strcasecmp (k, "bindpw")) {
++            l->bindpw = strdup (v);
++        }
++        else if (!strcasecmp (k, "timelimit")) {
++            l->s_timeout.tv_sec = atoi (v);
++                }
++        else if (!strcasecmp (k, "bind_timelimit")) {
++            l->b_timeout.tv_sec = atoi (v);
++        }
++        else if (!strcasecmp (k, "ssl")) {
++            if (!strcasecmp (v, "start_tls"))
++                l->tls = 1;
++        }
++    }
++
++    fclose (lcd);
++    return SUCCESS;
++}
++
++#endif /* WITH_LDAP_PUBKEY */
+--- ldapauth.h.orig	Sat Oct  7 17:26:32 2006
++++ ldapauth.h	Sat Oct  7 17:26:32 2006
+@@ -0,0 +1,119 @@
++/*
++ * $Id: openssh-lpk-4.3p1-0.3.7.patch,v 1.3 2006/04/18 15:29:09 eau Exp $ 
++ */
++
++/*
++ *
++ * Copyright (c) 2005, Eric AUGE <eau@phear.org>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
++ *
++ * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
++ * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
++ * Neither the name of the phear.org nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 
++ * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
++ * IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
++ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
++ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *
++ */
++
++#ifndef LDAPAUTH_H
++#define LDAPAUTH_H
++
++#include <string.h>
++#include <time.h>
++#include <ldap.h>
++#include <lber.h>
++
++/* tokens in use for config */
++#define _DEFAULT_LPK_TOKEN "UseLPK"
++#define _DEFAULT_SRV_TOKEN "LpkServers"
++#define _DEFAULT_USR_TOKEN "LpkUserDN"
++#define _DEFAULT_GRP_TOKEN "LpkGroupDN"
++#define _DEFAULT_BDN_TOKEN "LpkBindDN"
++#define _DEFAULT_BPW_TOKEN "LpkBindPw"
++#define _DEFAULT_MYG_TOKEN "LpkServerGroup"
++#define _DEFAULT_TLS_TOKEN "LpkForceTLS"
++#define _DEFAULT_BTI_TOKEN "LpkBindTimelimit"
++#define _DEFAULT_STI_TOKEN "LpkSearchTimelimit"
++#define _DEFAULT_LDP_TOKEN "LpkLdapConf"
++
++/* default options */
++#define _DEFAULT_LPK_ON 0
++#define _DEFAULT_LPK_SERVERS NULL
++#define _DEFAULT_LPK_UDN NULL
++#define _DEFAULT_LPK_GDN NULL
++#define _DEFAULT_LPK_BINDDN NULL
++#define _DEFAULT_LPK_BINDPW NULL
++#define _DEFAULT_LPK_SGROUP NULL
++#define _DEFAULT_LPK_TLS -1
++#define _DEFAULT_LPK_BTIMEOUT 10
++#define _DEFAULT_LPK_STIMEOUT 10
++#define _DEFAULT_LPK_LDP NULL
++
++/* flags */
++#define FLAG_EMPTY	    0x00000000
++#define FLAG_CONNECTED	    0x00000001
++
++/* flag macros */
++#define FLAG_SET_EMPTY(x)		x&=(FLAG_EMPTY)
++#define FLAG_SET_CONNECTED(x)		x|=(FLAG_CONNECTED)
++#define FLAG_SET_DISCONNECTED(x)	x&=~(FLAG_CONNECTED)
++
++/* defines */
++#define FAILURE -1
++#define SUCCESS 0
++#define PUBKEYATTR "sshPublicKey"
++
++/* 
++ *
++ * defined files path 
++ * (should be relocated to pathnames.h,
++ * if one day it's included within the tree) 
++ *
++ */
++#define _PATH_LDAP_CONFIG_FILE "/etc/ldap.conf"
++
++/* structures */
++typedef struct ldap_options {
++    int on;			/* Use it or NOT */
++    LDAP * ld;			/* LDAP file desc */
++    char * servers;		/* parsed servers for ldaplib failover handling */
++    char * u_basedn;		/* user basedn */
++    char * g_basedn;		/* group basedn */
++    char * binddn;		/* binddn */
++    char * bindpw;		/* bind password */
++    char * sgroup;		/* server group */
++    char * fgroup;		/* group filter */
++    char * l_conf;		/* use ldap.conf */
++    int tls;			/* TLS only */
++    struct timeval b_timeout;   /* bind timeout */
++    struct timeval s_timeout;   /* search timeout */
++    unsigned int flags;		/* misc flags (reconnection, future use?) */
++} ldap_opt_t;
++
++typedef struct ldap_keys {
++    struct berval ** keys;	/* the public keys retrieved */
++    unsigned int num;		/* number of keys */
++} ldap_key_t;
++
++
++/* function headers */
++void ldap_close(ldap_opt_t *);
++int ldap_connect(ldap_opt_t *);
++char * ldap_parse_groups(char *);
++char * ldap_parse_servers(char *);
++void ldap_options_print(ldap_opt_t *);
++void ldap_options_free(ldap_opt_t *);
++void ldap_keys_free(ldap_key_t *);
++int ldap_parse_lconf(ldap_opt_t *);
++ldap_key_t * ldap_getuserkey(ldap_opt_t *, char *);
++int ldap_ismember(ldap_opt_t *, char *);
++
++#endif
+--- lpk-user-example.txt.orig	Sat Oct  7 17:26:32 2006
++++ lpk-user-example.txt	Sat Oct  7 17:26:32 2006
+@@ -0,0 +1,117 @@
++
++Post to ML -> User Made Quick Install Doc.
++Contribution from John Lane <john@lane.uk.net>
++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++
++OpenSSH LDAP keystore Patch
++===========================
++
++NOTE: these notes are a transcript of a specific installation
++      they work for me, your specifics may be different!
++      from John Lane March 17th 2005         john@lane.uk.net
++
++This is a patch to OpenSSH 4.0p1 to allow it to obtain users' public keys
++from their LDAP record as an alternative to ~/.ssh/authorized_keys.
++
++(Assuming here that necessary build stuff is in $BUILD)
++
++cd $BUILD/openssh-4.0p1
++patch -Np1 -i $BUILD/openssh-lpk-4.0p1-0.3.patch
++mkdir -p /var/empty &&
++./configure --prefix=/usr --sysconfdir=/etc/ssh \
++    --libexecdir=/usr/sbin --with-md5-passwords --with-pam \
++    --with-libs="-lldap" --with-cppflags="-DWITH_LDAP_PUBKEY"
++Now do.
++make &&
++make install
++
++Add the following config to /etc/ssh/ssh_config
++UseLPK yes
++LpkServers ldap://myhost.mydomain.com
++LpkUserDN  ou=People,dc=mydomain,dc=com
++
++We need to tell sshd about the SSL keys during boot, as root's
++environment does not exist at that time. Edit /etc/rc.d/init.d/sshd.
++Change the startup code from this:
++                echo "Starting SSH Server..."
++                loadproc /usr/sbin/sshd
++                ;;
++to this:
++                echo "Starting SSH Server..."
++                LDAPRC="/root/.ldaprc" loadproc /usr/sbin/sshd
++                ;;
++
++Re-start the sshd daemon:
++/etc/rc.d/init.d/sshd restart
++
++Install the additional LDAP schema
++cp $BUILD/openssh-lpk-0.2.schema  /etc/openldap/schema/openssh.schema
++
++Now add the openSSH LDAP schema to /etc/openldap/slapd.conf:
++Add the following to the end of the existing block of schema includes
++include         /etc/openldap/schema/openssh.schema
++
++Re-start the LDAP server:
++/etc/rc.d/init.d/slapd restart
++
++To add one or more public keys to a user, eg "testuser" :
++ldapsearch -x -W -Z -LLL -b "uid=testuser,ou=People,dc=mydomain,dc=com" -D
++"uid=testuser,ou=People,dc=mydomain,dc=com" > /tmp/testuser
++
++append the following to this /tmp/testuser file
++objectclass: ldapPublicKey
++sshPublicKey: ssh-rsa
++AAAAB3NzaC1yc2EAAAABJQAAAIB3dsrwqXqD7E4zYYrxwdDKBUQxKMioXy9pxFVai64kAPxjU9KS
++qIo7QfkjslfsjflksjfldfkjsldfjLX/5zkzRmT28I5piGzunPv17S89z8XwSsuAoR1t86t+5dlI
++7eZE/gVbn2UQkQq7+kdDTS2yXV6VnC52N/kKLG3ciBkBAw== General Purpose RSA Key
++
++Then do a modify:
++ldapmodify -x -D "uid=testuser,ou=People,dc=mydomain,dc=com" -W -f
++/tmp/testuser -Z
++Enter LDAP Password:
++modifying entry "uid=testuser,ou=People,dc=mydomain,dc=com"
++And check the modify is ok:
++ldapsearch -x -W -Z -b "uid=testuser,ou=People,dc=mydomain,dc=com" -D
++"uid=testuser,ou=People,dc=mydomain,dc=com"
++Enter LDAP Password:
++# extended LDIF
++#
++# LDAPv3
++# base <uid=testuser,ou=People,dc=mydomain,dc=com> with scope sub
++# filter: (objectclass=*)
++# requesting: ALL
++#
++
++# testuser, People, mydomain.com
++dn: uid=testuser,ou=People,dc=mydomain,dc=com
++uid: testuser
++cn: testuser
++objectClass: account
++objectClass: posixAccount
++objectClass: top
++objectClass: shadowAccount
++objectClass: ldapPublicKey
++shadowLastChange: 12757
++shadowMax: 99999
++shadowWarning: 7
++loginShell: /bin/bash
++uidNumber: 9999
++gidNumber: 501
++homeDirectory: /home/testuser
++userPassword:: e1NTSEF9UDgwV1hnM1VjUDRJK0k1YnFiL1d4ZUJObXlZZ3Z3UTU=
++sshPublicKey: ssh-rsa
++AAAAB3NzaC1yc2EAAAABJQAAAIB3dsrwqXqD7E4zYYrxwdDKBUQxKMioXy9pxFVai64kAPxjU9KSqIo7QfkjslfsjflksjfldfkjsldfjLX/5zkzRmT28I5piGzunPv17S89z
++8XwSsuAoR1t86t+5dlI7eZE/gVbn2UQkQq7+kdDTS2yXV6VnC52N/kKLG3ciBkBAw== General Purpose RSA Key
++
++# search result
++search: 3
++result: 0 Success
++
++# numResponses: 2
++# numEntries: 1
++
++Now start a ssh session to user "testuser" from usual ssh client (e.g.
++puTTY). Login should succeed.
++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+--- openssh-lpk.schema.orig	Sat Oct  7 17:26:32 2006
++++ openssh-lpk.schema	Sat Oct  7 17:26:32 2006
+@@ -0,0 +1,21 @@
++#
++# $Id: openssh-lpk-4.3p1-0.3.7.patch,v 1.3 2006/04/18 15:29:09 eau Exp $
++#
++# LDAP Public Key Patch schema for use with openssh-ldappubkey
++# Author: Eric AUGE <eau@phear.org>
++# 
++# Based on the proposal of : Mark Ruijter
++#
++
++
++# octetString SYNTAX
++attributetype ( 1.3.6.1.4.1.22054.500.1.1.1.13 NAME 'sshPublicKey' 
++	DESC 'MANDATORY: OpenSSH Public key' 
++	EQUALITY octetStringMatch
++	SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 )
++
++# printableString SYNTAX yes|no
++objectclass ( 1.3.6.1.4.1.22054.500.1.1.2.0 NAME 'ldapPublicKey' SUP top AUXILIARY
++	DESC 'MANDATORY: OpenSSH LPK objectclass'
++	MUST ( sshPublicKey $ uid ) 
++	)
+--- servconf.c.orig	Fri Aug 18 11:23:15 2006
++++ servconf.c	Sat Oct  7 17:31:53 2006
+@@ -40,6 +40,10 @@
+ #include "channels.h"
+ #include "groupaccess.h"
+ 
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ static void add_listen_addr(ServerOptions *, char *, u_short);
+ static void add_one_listen_addr(ServerOptions *, char *, u_short);
+ 
+@@ -120,6 +124,23 @@
+ 	options->authorized_keys_file2 = NULL;
+ 	options->num_accept_env = 0;
+ 	options->permit_tun = -1;
++#ifdef WITH_LDAP_PUBKEY
++	/* XXX dirty */
++	options->lpk.ld = NULL;
++	options->lpk.on = -1;
++	options->lpk.servers = NULL;
++	options->lpk.u_basedn = NULL;
++	options->lpk.g_basedn = NULL;
++	options->lpk.binddn = NULL;
++	options->lpk.bindpw = NULL;
++	options->lpk.sgroup = NULL;
++	options->lpk.fgroup = NULL;
++	options->lpk.l_conf = NULL;
++	options->lpk.tls = -1;
++	options->lpk.b_timeout.tv_sec = 0;
++	options->lpk.s_timeout.tv_sec = 0;
++	options->lpk.flags = FLAG_EMPTY;
++#endif
+ 	options->num_permitted_opens = -1;
+ 	options->adm_forced_command = NULL;
+ }
+@@ -249,6 +270,30 @@
+ 		options->authorized_keys_file = _PATH_SSH_USER_PERMITTED_KEYS;
+ 	if (options->permit_tun == -1)
+ 		options->permit_tun = SSH_TUNMODE_NO;
++#ifdef WITH_LDAP_PUBKEY
++	if (options->lpk.on == -1)
++	    options->lpk.on = _DEFAULT_LPK_ON;
++	if (options->lpk.servers == NULL)
++	    options->lpk.servers = _DEFAULT_LPK_SERVERS;
++	if (options->lpk.u_basedn == NULL)
++	    options->lpk.u_basedn = _DEFAULT_LPK_UDN;
++	if (options->lpk.g_basedn == NULL)
++	    options->lpk.g_basedn = _DEFAULT_LPK_GDN;
++	if (options->lpk.binddn == NULL)
++	    options->lpk.binddn = _DEFAULT_LPK_BINDDN;
++	if (options->lpk.bindpw == NULL)
++	    options->lpk.bindpw = _DEFAULT_LPK_BINDPW;
++	if (options->lpk.sgroup == NULL)
++	    options->lpk.sgroup = _DEFAULT_LPK_SGROUP;
++	if (options->lpk.tls == -1)
++	    options->lpk.tls = _DEFAULT_LPK_TLS;
++	if (options->lpk.b_timeout.tv_sec == 0)
++	    options->lpk.b_timeout.tv_sec = _DEFAULT_LPK_BTIMEOUT;
++	if (options->lpk.s_timeout.tv_sec == 0)
++	    options->lpk.s_timeout.tv_sec = _DEFAULT_LPK_STIMEOUT;
++	if (options->lpk.l_conf == NULL)
++	    options->lpk.l_conf = _DEFAULT_LPK_LDP;
++#endif
+ 
+ 	/* Turn privilege separation on by default */
+ 	if (use_privsep == -1)
+@@ -294,6 +339,12 @@
+ 	sMatch, sPermitOpen, sForceCommand,
+ 	sUsePrivilegeSeparation,
+ 	sDeprecated, sUnsupported
++#ifdef WITH_LDAP_PUBKEY
++	,sLdapPublickey, sLdapServers, sLdapUserDN
++	,sLdapGroupDN, sBindDN, sBindPw, sMyGroup
++	,sForceTLS, sBindTimeout, sSearchTimeout
++	,sLdapConf
++#endif
+ } ServerOpCodes;
+ 
+ #define SSHCFG_GLOBAL	0x01	/* allowed in main section of sshd_config */
+@@ -397,6 +448,19 @@
+ 	{ "clientalivecountmax", sClientAliveCountMax, SSHCFG_GLOBAL },
+ 	{ "authorizedkeysfile", sAuthorizedKeysFile, SSHCFG_GLOBAL },
+ 	{ "authorizedkeysfile2", sAuthorizedKeysFile2, SSHCFG_GLOBAL },
++#ifdef WITH_LDAP_PUBKEY
++	{ _DEFAULT_LPK_TOKEN, sLdapPublickey },
++	{ _DEFAULT_SRV_TOKEN, sLdapServers },
++	{ _DEFAULT_USR_TOKEN, sLdapUserDN },
++	{ _DEFAULT_GRP_TOKEN, sLdapGroupDN },
++	{ _DEFAULT_BDN_TOKEN, sBindDN },
++	{ _DEFAULT_BPW_TOKEN, sBindPw },                                   
++	{ _DEFAULT_MYG_TOKEN, sMyGroup },
++	{ _DEFAULT_TLS_TOKEN, sForceTLS },
++	{ _DEFAULT_BTI_TOKEN, sBindTimeout },
++	{ _DEFAULT_STI_TOKEN, sSearchTimeout },
++	{ _DEFAULT_LDP_TOKEN, sLdapConf },
++#endif
+ 	{ "useprivilegeseparation", sUsePrivilegeSeparation, SSHCFG_GLOBAL },
+ 	{ "acceptenv", sAcceptEnv, SSHCFG_GLOBAL },
+ 	{ "permittunnel", sPermitTunnel, SSHCFG_GLOBAL },
+@@ -1266,6 +1330,116 @@
+ 		while (arg)
+ 		    arg = strdelim(&cp);
+ 		break;
++#ifdef WITH_LDAP_PUBKEY
++	case sLdapPublickey:
++		intptr = &options->lpk.on;
++		goto parse_flag;
++	case sLdapServers:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while(*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing ldap server",filename,linenum);
++		arg[strlen(arg)] = '\0';
++		if ((options->lpk.servers = ldap_parse_servers(arg)) == NULL)
++		    fatal("%s line %d: error in ldap servers", filename, linenum);
++		memset(arg,0,strlen(arg));
++		break;
++	case sLdapUserDN:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while(*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing ldap server",filename,linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.u_basedn = xstrdup(arg);
++		memset(arg,0,strlen(arg));
++		break;
++	case sLdapGroupDN:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while(*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing ldap server",filename,linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.g_basedn = xstrdup(arg);
++		memset(arg,0,strlen(arg));
++		break;
++	case sBindDN:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while(*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing binddn",filename,linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.binddn = xstrdup(arg);
++		memset(arg,0,strlen(arg));
++		break;
++	case sBindPw:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while(*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing bindpw",filename,linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.bindpw = xstrdup(arg);
++		memset(arg,0,strlen(arg));
++		break;
++	case sMyGroup:
++		p = line;
++		while (*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing groupname",filename, linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.sgroup = xstrdup(arg);
++		if (options->lpk.sgroup)
++		    options->lpk.fgroup = ldap_parse_groups(options->lpk.sgroup);
++		memset(arg,0,strlen(arg));
++		break;
++	case sForceTLS:
++		intptr = &options->lpk.tls;
++		arg = strdelim(&cp);
++		if (!arg || *arg == '\0')
++			fatal("%s line %d: missing yes/no argument.",
++			    filename, linenum);
++		value = 0;	/* silence compiler */
++		if (strcmp(arg, "yes") == 0)
++			value = 1;
++		else if (strcmp(arg, "no") == 0)
++			value = 0;
++		else if (strcmp(arg, "try") == 0)
++			value = -1;
++		else
++			fatal("%s line %d: Bad yes/no argument: %s",
++				filename, linenum, arg);
++		if (*intptr == -1)
++			*intptr = value;
++		break;
++	case sBindTimeout:
++		intptr = (int *) &options->lpk.b_timeout.tv_sec;
++		goto parse_int;
++	case sSearchTimeout:
++		intptr = (int *) &options->lpk.s_timeout.tv_sec;
++		goto parse_int;
++		break;
++	case sLdapConf:
++		/* arg = strdelim(&cp); */
++		p = line;
++		while (*p++);
++		arg = p;
++		if (!arg || *arg == '\0')
++		    fatal("%s line %d: missing LpkLdapConf", filename, linenum);
++		arg[strlen(arg)] = '\0';
++		options->lpk.l_conf = xstrdup(arg);
++		memset(arg, 0, strlen(arg));
++		break;
++#endif
+ 
+ 	default:
+ 		fatal("%s line %d: Missing handler for opcode %s (%d)",
+--- servconf.h.orig	Fri Aug 18 11:23:15 2006
++++ servconf.h	Sat Oct  7 17:32:38 2006
+@@ -16,6 +16,10 @@
+ #ifndef SERVCONF_H
+ #define SERVCONF_H
+ 
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ #define MAX_PORTS		256	/* Max # ports. */
+ 
+ #define MAX_ALLOW_USERS		256	/* Max # users on allow list. */
+@@ -139,6 +143,10 @@
+ 	int	use_pam;		/* Enable auth via PAM */
+ 
+ 	int	permit_tun;
++
++#ifdef WITH_LDAP_PUBKEY
++	ldap_opt_t lpk;
++#endif
+ 
+ 	int	num_permitted_opens;
+ }       ServerOptions;
+--- sshd.c.orig	Sun Sep 17 01:04:46 2006
++++ sshd.c	Sat Oct  7 17:26:32 2006
+@@ -124,6 +124,10 @@
+ int deny_severity = LOG_WARNING;
+ #endif /* LIBWRAP */
+ 
++#ifdef WITH_LDAP_PUBKEY
++#include "ldapauth.h"
++#endif
++
+ #ifndef O_NOCTTY
+ #define O_NOCTTY	0
+ #endif
+@@ -1429,6 +1433,16 @@
+ 		exit(1);
+ 	}
+ 
++#ifdef WITH_LDAP_PUBKEY
++    /* ldap_options_print(&options.lpk); */
++    /* XXX initialize/check ldap connection and set *LD */
++    if (options.lpk.on) {
++        if (options.lpk.l_conf && (ldap_parse_lconf(&options.lpk) < 0) )
++            error("[LDAP] could not parse %s", options.lpk.l_conf);
++        if (ldap_connect(&options.lpk) < 0)
++            error("[LDAP] could not initialize ldap connection");
++    }
++#endif
+ 	debug("sshd version %.100s", SSH_RELEASE);
+ 
+ 	/* Store privilege separation user for later use */
+--- sshd_config.orig	Mon Jul 24 01:06:47 2006
++++ sshd_config	Sat Oct  7 17:26:32 2006
+@@ -101,6 +101,20 @@
+ 
+ # no default banner path
+ #Banner /some/path
++ 
++# here are the new patched ldap related tokens
++# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
++#UseLPK yes
++#LpkLdapConf /etc/ldap.conf
++#LpkServers  ldap://10.1.7.1 ldap://10.1.7.2
++#LpkUserDN   ou=users,dc=phear,dc=org
++#LpkGroupDN  ou=groups,dc=phear,dc=org
++#LpkBindDN cn=Manager,dc=phear,dc=org
++#LpkBindPw secret
++#LpkServerGroup mail
++#LpkForceTLS no
++#LpkSearchTimelimit 3
++#LpkBindTimelimit 3
+ 
+ # override default of no subsystems
+ Subsystem	sftp	/usr/libexec/sftp-server
+--- sshd_config.5.orig	Tue Aug 29 22:06:34 2006
++++ sshd_config.5	Sat Oct  7 17:26:32 2006
+@@ -897,6 +897,58 @@
+ program.
+ The default is
+ .Pa /usr/X11R6/bin/xauth .
++.It Cm UseLPK
++Specifies whether LDAP public key retrieval must be used or not. It allow
++an easy centralisation of public keys within an LDAP directory. The argument must be
++.Dq yes
++or
++.Dq no .
++.It Cm LpkLdapConf
++Specifies whether LDAP Public keys should parse the specified ldap.conf file
++instead of sshd_config Tokens. The argument must be a valid path to an ldap.conf
++file like
++.Pa /etc/ldap.conf
++.It Cm LpkServers
++Specifies LDAP one or more [:space:] separated server's url the following form may be used:
++.Pp
++LpkServers ldaps://127.0.0.1 ldap://127.0.0.2 ldap://127.0.0.3
++.It Cm LpkUserDN
++Specifies the LDAP user DN.
++.Pp
++LpkUserDN ou=users,dc=phear,dc=org
++.It Cm LpkGroupDN
++Specifies the LDAP groups DN.
++.Pp
++LpkGroupDN ou=groups,dc=phear,dc=org
++.It Cm LpkBindDN
++Specifies the LDAP bind DN to use if necessary.
++.Pp
++LpkBindDN cn=Manager,dc=phear,dc=org
++.It Cm LpkBindPw
++Specifies the LDAP bind credential. 
++.Pp
++LpkBindPw secret
++.It Cm LpkServerGroup
++Specifies one or more [:space:] separated group the server is part of. 
++.Pp
++LpkServerGroup unix mail prod
++.It Cm LpkForceTLS
++Specifies if the LDAP server connection must be tried, forced or not used. The argument must be 
++.Dq yes
++or
++.Dq no
++or
++.Dq try .
++.It Cm LpkSearchTimelimit
++Sepcifies the search time limit before the search is considered over. value is
++in seconds.
++.Pp
++LpkSearchTimelimit 3
++.It Cm LpkBindTimelimit
++Sepcifies the bind time limit before the connection is considered dead. value is
++in seconds.
++.Pp
++LpkBindTimelimit 3
+ .El
+ .Sh TIME FORMATS
+ .Xr sshd 8