- Switch to a rc.d startup script.

- Remove obsolete USE_REINPLACE.

Approved by:	netchild

5 files changed, 51 insertions, 52 deletions

diff --git a/sysutils/afbinit/Makefile b/sysutils/afbinit/Makefile
index 287464f7aeb7..c737a9578162 100644
--- a/sysutils/afbinit/Makefile
+++ b/sysutils/afbinit/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=		afbinit
 PORTVERSION=		1.0
-PORTREVISION=		1
+PORTREVISION=		2
 CATEGORIES=		sysutils graphics
 MASTER_SITES=		${MASTER_SITE_DEBIAN}
 MASTER_SITE_SUBDIR=	pool/contrib/a/afbinit
@@ -22,18 +22,18 @@ MAINTAINER=		marius@FreeBSD.org
 COMMENT=		Sun AFB aka Sun Elite 3D microcode firmware loader
 
 ONLY_FOR_ARCHS=		sparc64
-USE_REINPLACE=		yes
+USE_RC_SUBR=		afbinit.sh
 WRKSRC=			${WRKDIR}/${DISTNAME:S/_/-/}
 PKGMESSAGE=		${WRKDIR}/pkg-message
 
 MAN8=			afbinit.8
 
 post-patch:
-.for i in afbinit.c debian/afbinit.8 debian/afbinit.init
+.for i in afbinit.c debian/afbinit.8
 	@${REINPLACE_CMD} -E -e 's|\/usr\/lib|${DATADIR}|g; \
 		s|(\/dev\/fb\[)[0-3]+(\])|\10-7\2|g; \
-		s|\/etc\/init.d\/afb|${PREFIX}/etc/afbinit.sh|g; \
-		s|\/usr\/sbin|${PREFIX}/sbin|g' ${WRKSRC}/${i}
+		s|\/etc\/init.d\/afb|${PREFIX}/etc/rc.d/afbinit\{,.sh\}|g' \
+		${WRKSRC}/${i}
 .endfor
 	@${SED} 's|%%DATADIR%%|${DATADIR}|g' ${PKGDIR}/pkg-message > \
 		${WRKDIR}/pkg-message
@@ -44,8 +44,6 @@ do-build:
 do-install:
 	@${INSTALL_PROGRAM} ${WRKSRC}/afbinit ${PREFIX}/sbin
 	@${INSTALL_MAN} ${WRKSRC}/debian/afbinit.8 ${PREFIX}/man/man8
-	@${INSTALL_SCRIPT} ${WRKSRC}/debian/afbinit.init \
-		${PREFIX}/etc/rc.d/afbinit.sh
 	@${INSTALL} -d ${DATADIR}
 
 post-install:
diff --git a/sysutils/afbinit/files/afbinit.sh.in b/sysutils/afbinit/files/afbinit.sh.in
new file mode 100644
index 000000000000..4af10f97013e
--- /dev/null
+++ b/sysutils/afbinit/files/afbinit.sh.in
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: afbinit
+# REQUIRE: devfs
+#
+# Available configuration variables for afbinit are:
+#
+# afbinit_enable (bool):	Set to "YES" to enable afbinit.
+#				Defaults to "NO".
+#
+# Add at least the following line to /etc/rc.conf or /etc/rc.conf.local to
+# enable afbinit:
+#
+# afbinit="YES"
+#
+
+. %%RC_SUBR%%
+
+name="afbinit"
+rcvar=${name}_enable
+
+start_cmd="afbinit_startcmd"
+
+afbinit_startcmd()
+{
+	if [ ! -r %%DATADIR%%/afb.ucode ]; then
+		err 1 '%%DATADIR%%/afb.ucode is not readable.'
+	fi
+
+	for fb in /dev/fb[0-7]; do
+		%%PREFIX%%/sbin/afbinit ${fb} %%DATADIR%%/afb.ucode
+	done
+}
+
+load_rc_config $name
+
+: ${afbinit_enable="NO"}
+
+run_rc_command "$1"
diff --git a/sysutils/afbinit/files/patch-debian::afbinit.init b/sysutils/afbinit/files/patch-debian::afbinit.init
deleted file mode 100644
index 7001bf00d7e1..000000000000
--- a/sysutils/afbinit/files/patch-debian::afbinit.init
+++ /dev/null
@@ -1,44 +0,0 @@
---- debian/afbinit.init.orig	Mon Sep 15 17:41:40 2003
-+++ debian/afbinit.init	Mon Sep 15 18:08:15 2003
-@@ -1,35 +1,28 @@
- #!/bin/sh
- 
--PATH=/sbin:/bin:/usr/sbin:/usr/bin
--set -e
--
- # This only applies to UltraSPARC's
--[ `uname -m` = "sparc64" ] || exit 0
-+[ `/usr/bin/uname -m` = "sparc64" ] || exit 0
- 
- # The microcode loader binary and the microcode itself must exist.
- if [ ! -x /usr/sbin/afbinit -o ! -f /usr/lib/afb.ucode ]; then
- 	exit
- fi
- 
--# Need a better way to test this
--[ `dmesg | grep -c "Elite 3D"` -ne 0 ] || exit
--
- case "$1" in
-   start)
- 	# Make FB device list.
--	afb_devs=`/bin/dmesg | /bin/egrep -i "Elite 3D" | /bin/sed 's/\:.*//'`
-+	afb_devs=`/bin/ls /dev/fb[0-7]`
- 
- 	# Load microcode onto each card.
- 	for AFB in ${afb_devs}; do
--		echo -n "${AFB}: Loading Elite3D microcode... "
--		/usr/sbin/afbinit /dev/${AFB} /usr/lib/afb.ucode
--		echo "done."
-+		/usr/sbin/afbinit ${AFB} /usr/lib/afb.ucode > /dev/null
- 	done
-+	echo -n ' afbinit'
- 	;;
--  stop|restart|force-reload) # Nothing
-+  stop|restart) # Nothing
- 	;;
-   *)
--	echo "Usage: $0 start" >&2
-+	echo "Usage: `basename $0` start" >&2
- 	exit 1
- 	;;
- esac
diff --git a/sysutils/afbinit/pkg-message b/sysutils/afbinit/pkg-message
index d5656197e4c0..9f7244956f72 100644
--- a/sysutils/afbinit/pkg-message
+++ b/sysutils/afbinit/pkg-message
@@ -2,5 +2,9 @@
 
 In order to use afbinit(8) you have to manually copy /usr/lib/afb.ucode
 from a SunOS/Solaris installation over to %%DATADIR%%.
+In order to automatically load the microcode during boot add the following
+line to to /etc/rc.conf or /etc/rc.conf.local:
+
+afbinit_enable="YES"
 
 ===========================================================================
diff --git a/sysutils/afbinit/pkg-plist b/sysutils/afbinit/pkg-plist
index 60cb39356474..c222e0822625 100644
--- a/sysutils/afbinit/pkg-plist
+++ b/sysutils/afbinit/pkg-plist
@@ -1,4 +1,3 @@
-etc/rc.d/afbinit.sh
 sbin/afbinit
 @exec install -d %D/%%DATADIR%%
 @unexec rmdir %D/%%DATADIR%% 2> /dev/null || echo "If permanently deleting this package, %D/%%DATADIR%% and its contents must be removed manually."