Main changes:

- The periodic script should print a banner, like all other periodic script
- Don't sort the PD heading output, it breaks with certain numbering

Minor nits:
- Fix spelling
- pet portlint(1)
- Use awk(1) to alleviate the need for additional wc(1)
- remove non-portable -z flag to cmp(1)

PR:		118416
Submitted by:	Ulrich Spoerlein <uspoerlein at gmail.com>
Reviewed by:	maintainer timeout (3 weeks)

4 files changed, 9 insertions, 8 deletions

diff --git a/sysutils/linux-megacli/Makefile b/sysutils/linux-megacli/Makefile
index 6b2caf83d8cb..ae72fce2462d 100644
--- a/sysutils/linux-megacli/Makefile
+++ b/sysutils/linux-megacli/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	megacli
 PORTVERSION=	1.01.09
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	sysutils linux
 MASTER_SITES=	http://lsi.com/files/support/rsa/MR_SAS_1.0/
 PKGNAMEPREFIX=	linux-
@@ -28,7 +28,6 @@ SUB_FILES+=	407.status-mfi-raid
 RPM2CPIO?=			${LOCALBASE}/bin/rpm2cpio
 EXTRACT_DEPENDS+=		${RPM2CPIO}:${PORTSDIR}/archivers/rpm
 
-
 post-extract:
 	@cd ${WRKSRC} && \
 		${UNZIP_CMD} MegaCliLin.zip && \
@@ -39,7 +38,7 @@ do-build:
 
 do-install:
 	${INSTALL_SCRIPT} ${WRKSRC}/megacli.sh ${PREFIX}/sbin/megacli
-	${MKDIR} -p ${PREFIX}/etc/periodic/daily
+	${MKDIR} ${PREFIX}/etc/periodic/daily
 	${INSTALL_SCRIPT} ${WRKSRC}/407.status-mfi-raid ${PREFIX}/etc/periodic/daily
 	${INSTALL_PROGRAM} ${WRKSRC}/usr/sbin/MegaCli ${PREFIX}/libexec
 
diff --git a/sysutils/linux-megacli/files/407.status-mfi-raid.in b/sysutils/linux-megacli/files/407.status-mfi-raid.in
index 609709797071..54c58a9cb35f 100644
--- a/sysutils/linux-megacli/files/407.status-mfi-raid.in
+++ b/sysutils/linux-megacli/files/407.status-mfi-raid.in
@@ -22,6 +22,8 @@ logdir=${logdir:-/var/log}
 
 case "$daily_status_mfi_raid_enable" in
     [Yy][Ee][Ss])
+	echo
+	echo 'Checking status of MFI RAID controllers:'
 	;;
     *)
 	exit 0
@@ -58,12 +60,12 @@ for ctrl in `jot ${ADPCOUNT} ${ADPMINIDX} ${ADPMAXIDX}`; do
 	# Print summary information.
 	echo "------------------------------------------------------------------------"
 	echo "Physical Drive Information:"
+	echo "ENC SLO DEV SEQ MEC OEC PFC LPF STATE"
 	${megacli} -PDList -a${ctrl} | \
 	awk '
 		BEGIN {
 			E=-1; S=-1; D=-1; s=-1; mec=-1; oec=-1; pfc=-1; lpfeqn=-1;
 			state="";
-			printf "ENC SLO DEV SEQ MEC OEC PFC LPF STATE\n";
 		}
 		/^Enclosure Number:/ { E=$3; }
 		/^Slot Number:/ { S=$3; }
@@ -199,7 +201,7 @@ for ctrl in `jot ${ADPCOUNT} ${ADPMINIDX} ${ADPMAXIDX}`; do
 	# Now show the differences or the entire log.
 	case "$daily_status_mfi_raid_persist_logs" in
 	[Yy][Ee][Ss])
-		cmp -zs ${ctrl_log}.yesterday ${ctrl_log}.today
+		cmp -s ${ctrl_log}.yesterday ${ctrl_log}.today
 		raid_rc=$?
 		if test $raid_rc -ne 0; then
 			diff -u ${ctrl_log}.yesterday ${ctrl_log}.today | \
diff --git a/sysutils/linux-megacli/files/README-status-mfi-raid.txt b/sysutils/linux-megacli/files/README-status-mfi-raid.txt
index 3dae7a7da976..7f6cbae76998 100644
--- a/sysutils/linux-megacli/files/README-status-mfi-raid.txt
+++ b/sysutils/linux-megacli/files/README-status-mfi-raid.txt
@@ -1,7 +1,7 @@
 # $FreeBSD$
 
 The output of periodic/daily/407.status-mfi-raid uses several
-abbreviations. This documents maps the abbreviations to the
+abbreviations. This document maps the abbreviations to the
 names MegaCli uses, which were just too long for summary mails.
 
 Section 'Physical Drive Information:'
diff --git a/sysutils/linux-megacli/files/megacli.sh.in b/sysutils/linux-megacli/files/megacli.sh.in
index f28e45bc8a97..faca0d4ae890 100644
--- a/sysutils/linux-megacli/files/megacli.sh.in
+++ b/sysutils/linux-megacli/files/megacli.sh.in
@@ -13,12 +13,12 @@ if ! [ `sysctl -n compat.linux.osrelease` = "2.6.12" ]; then
 	exit 1
 fi
 
-lpfs=`mount -t linprocfs | wc -l | awk '{ print $1 }'`
+lpfs=`mount -t linprocfs | awk 'END{ print NR }'`
 if [ ${lpfs} -le 0 ]; then
 	echo "You need to mount linprocfs to run `basename $0`." >&2
 	exit 1
 fi
-lsfs=`mount -t linsysfs | wc -l | awk '{ print $1 }'`
+lsfs=`mount -t linsysfs | awk 'END{ print NR }'`
 if [ ${lsfs} -le 0 ]; then
 	echo "You need to mount linsysfs to run `basename $0`." >&2
 	exit 1