Aironet Cisco Utilities for 802.11 wireless NIC's. Runs under Linux

emulation.

Submitted by:	Matt Peterson <matt@peterson.org>

7 files changed, 83 insertions, 0 deletions

diff --git a/sysutils/Makefile b/sysutils/Makefile
index 8921f218f016..cfadf73092d1 100644
--- a/sysutils/Makefile
+++ b/sysutils/Makefile
@@ -94,6 +94,7 @@
     SUBDIR += lcdproc
     SUBDIR += lfm
     SUBDIR += libretto-config
+    SUBDIR += linux-acu
     SUBDIR += livecd
     SUBDIR += lmmon
     SUBDIR += log_analysis
diff --git a/sysutils/linux-acu/Makefile b/sysutils/linux-acu/Makefile
new file mode 100644
index 000000000000..55210b28c7c2
--- /dev/null
+++ b/sysutils/linux-acu/Makefile
@@ -0,0 +1,57 @@
+# New ports collection makefile for:	linux-acu
+# Date created:		Tue Jun 25 02:24:41 GMT 2002
+# Whom:			Matt Peterson <matt@peterson.org>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	acu
+PORTVERSION=	2.0
+CATEGORIES=	sysutils
+MASTER_SITES=	# fetch manually
+PKGNAMEPREFIX=	linux-
+DISTNAME=	Linux-ACU-Driver-v${PORTVERSION}
+
+MAINTAINER=	matt@peterson.org
+
+RUN_DEPENDS=	${LINUXBASE}/lib/libc.so.6:${PORTSDIR}/emulators/linux_base \
+		${LINUXBASE}/usr/lib/libgtk-1.2.so.0:${PORTSDIR}/x11-toolkits/linux-gtk
+
+.include <bsd.port.pre.mk>
+
+#.if ${OSVERSION} < 460000
+#BROKEN=         "${PORTNAME} is not available for your version of FreeBSD.  Please upgrade."
+#.endif
+
+.if !exists(${DISTDIR}/${DISTNAME}${EXTRACT_SUFX})
+IGNORE=		may not be automatically fetched due to licensing\
+		restrictions.  You MUST manually fetch the tarball after\
+		reading and agreeing to the license at:\
+		http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet-utils-linux\
+		- once '${DISTNAME}${EXTRACT_SUFX}' has been downloaded, move it to\
+		${DISTDIR} and then restart this build.
+.endif
+
+ONLY_FOR_ARCHS=	i386
+USE_XLIB=	yes
+NO_WRKSUBDIR=	yes
+NO_BUILD=	yes
+NO_CDROM=	"Redistribution not allowed"
+
+do-install:
+	@${MKDIR} ${PREFIX}/bin
+	@${MKDIR} ${LINUXBASE}/proc/aironet
+	@${INSTALL} ${WRKSRC}/utilities/acu ${PREFIX}/bin
+
+post-install:
+	@${ECHO} "acu installed under ${PREFIX}/bin"
+	@${ECHO} "notes: acu will only run from the root super-user account"
+	@${ECHO} "       to allow root access to your X session,"
+	@${ECHO} "       run 'xhost localhost' or use sudo."
+	@${ECHO} "       acu will not run with linprocfs since it needs to see:"
+	@${ECHO} "	        ${LINUXBASE}/proc/aironet""
+	@${ECHO} "	acu annoyingly creates"
+	@${ECHO} "		/compat/linux/etc/eth2.cfg"
+	@${ECHO} "	and will use that over the current card's settings."
+
+.include <bsd.port.post.mk>
diff --git a/sysutils/linux-acu/distinfo b/sysutils/linux-acu/distinfo
new file mode 100644
index 000000000000..be5145cce51f
--- /dev/null
+++ b/sysutils/linux-acu/distinfo
@@ -0,0 +1 @@
+MD5 (Linux-ACU-Driver-v2.0.tar.gz) = 5985ebe4cf6b7b7e8535bb73031c4a6d
diff --git a/sysutils/linux-acu/pkg-comment b/sysutils/linux-acu/pkg-comment
new file mode 100644
index 000000000000..6150a9063983
--- /dev/null
+++ b/sysutils/linux-acu/pkg-comment
@@ -0,0 +1 @@
+Aironet Cisco Utilities for 802.11 wireless NIC's
diff --git a/sysutils/linux-acu/pkg-descr b/sysutils/linux-acu/pkg-descr
new file mode 100644
index 000000000000..95a9ab2985dc
--- /dev/null
+++ b/sysutils/linux-acu/pkg-descr
@@ -0,0 +1,12 @@
+ACU is the Aironet Cisco Utilities.
+
+The ACU is used to configure Cisco/Aironet 802.11 wireless cards.  This
+GTK utility includes tools for link monitoring, LEAP authentication, and
+other specific functions not available with ancontrol(8).
+
+This port consists of Cisco's Linux ACU client which runs on FreeBSD using
+the linux emulation system.
+
+WWW: http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet-utils-linux
+
+Matt Peterson <matt@peterson.org>
diff --git a/sysutils/linux-acu/pkg-message b/sysutils/linux-acu/pkg-message
new file mode 100644
index 000000000000..ab0229b334f7
--- /dev/null
+++ b/sysutils/linux-acu/pkg-message
@@ -0,0 +1,8 @@
+acu installed under ${PREFIX}/bin
+	to allow root access to your X session,
+	run 'xhost localhost' or use sudo.
+	acu will not run with linprocfs since it needs to see:
+		/compact/linux/proc/aironet
+	acu annoyingly creates
+		/compat/linux/etc/eth2.cfg
+	and will use that over the current card's settings.
diff --git a/sysutils/linux-acu/pkg-plist b/sysutils/linux-acu/pkg-plist
new file mode 100644
index 000000000000..a69cc080de38
--- /dev/null
+++ b/sysutils/linux-acu/pkg-plist
@@ -0,0 +1,3 @@
+bin/acu
+@exec   mkdir -p /compat/linux/proc/aironet
+@unexec rm -rf   /compat/linux/proc/aironet