- Update to 3.0.STABLE11

- Enable the squid_kerb_auth helper as in www/squid

PR:		129913
Submitted by:	Thomas-Martin Seck <tmseck@web.de> (maintainer)

3 files changed, 481 insertions, 15 deletions

diff --git a/www/squid31/Makefile b/www/squid31/Makefile
index e2bb4040d2f7..0e62de8c8b20 100644
--- a/www/squid31/Makefile
+++ b/www/squid31/Makefile
@@ -48,8 +48,6 @@
 #     Do not use "unlinkd"
 #    --with-aufs-threads=N_THREADS
 #     Tune the number of worker threads for the aufs object
-#    --with-coss-membuf-size
-#     COSS membuf size (default: 1048576 bytes)
 #    --with-filedescriptors=N
 #     Force Squid to use N filedescriptors.
 #    --enable-ntlm-fail-open
@@ -94,20 +92,17 @@ PATCH_SITES=	http://www.squid-cache.org/%SUBDIR%/ \
 		http://www1.jp.squid-cache.org/%SUBDIR%/ \
 		http://www1.tw.squid-cache.org/%SUBDIR%/
 PATCH_SITE_SUBDIR=	Versions/v3/3.0/changesets
-PATCHFILES=	b8920.patch
+PATCHFILES=
 
 MAINTAINER=	tmseck@web.de
 COMMENT=	HTTP Caching Proxy
 
 LATEST_LINK=	squid30
 
-SQUID_STABLE_VER=	10
+SQUID_STABLE_VER=	11
 
 CONFLICTS=	squid-2.[0-9].* cacheboy-[0-9]*
 GNU_CONFIGURE=	yes
-# disable autotools bootstrapping for now, 3.0.STABLE does not currently
-# require it:
-#USE_AUTOTOOLS=	autoconf:262 automake:19 libtool:15
 USE_BZIP2=	yes
 USE_PERL5=	yes
 USE_RC_SUBR=	squid
@@ -231,11 +226,17 @@ libexec+=	sasl_auth
 basic_auth+=	YP
 libexec+=	yp_auth
 .endif
-CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
+CONFIGURE_ARGS+=	--enable-auth="basic digest negotiate ntlm" \
 			--enable-basic-auth-helpers="${basic_auth}" \
 			--enable-digest-auth-helpers="${digest_auth}" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB"
+.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
+# XXX This currently only works with heimdal from the base system,
+#     see files/patch-squid_kerb_auth:
+CONFIGURE_ARGS+=	--enable-negotiate-auth-helpers="squid_kerb_auth"
+libexec+=	squid_kerb_auth
+.endif
 
 # Storage schemes:
 
@@ -448,7 +449,7 @@ post-install:
 	@${CAT} ${PKGMESSAGE}
 	@${ECHO_CMD} ""
 .if defined(WITH_SQUID_COSS)
-	@${ECHO_CMD} "Note: COSS support is currently disabled in Squid-3 by the Squid developers."
+	@${ECHO_CMD} "Note: COSS support is currently not available in Squid-3."
 	@${ECHO_CMD} "Please check your squid.conf and comment out any 'cache_dir coss' definitions."
 	@${ECHO_CMD} ""
 .endif
diff --git a/www/squid31/distinfo b/www/squid31/distinfo
index 858bd426aacd..2ef6cc76b3a8 100644
--- a/www/squid31/distinfo
+++ b/www/squid31/distinfo
@@ -1,6 +1,3 @@
-MD5 (squid3.0/squid-3.0.STABLE10.tar.bz2) = cfd37717230220a9f47177594e235f18
-SHA256 (squid3.0/squid-3.0.STABLE10.tar.bz2) = 5e55568f65eee3b96e5cc9f63f4bf9729853dcc0ab94c044250a216b92f091a8
-SIZE (squid3.0/squid-3.0.STABLE10.tar.bz2) = 1797628
-MD5 (squid3.0/b8920.patch) = 110cb1823430cec022d1e06c294998a8
-SHA256 (squid3.0/b8920.patch) = 63e6fa89a72762e2dbcdbebca139d697a266cf778892e53fc021481ed4bbeda3
-SIZE (squid3.0/b8920.patch) = 1296
+MD5 (squid3.0/squid-3.0.STABLE11.tar.bz2) = c6218ecf636a4a9ac9579d1a58e1fbe9
+SHA256 (squid3.0/squid-3.0.STABLE11.tar.bz2) = 031d24d4dc47abf08632feb079093e2366690cf4bb63ba6d46fa46432cbdc2ef
+SIZE (squid3.0/squid-3.0.STABLE11.tar.bz2) = 1806079
diff --git a/www/squid31/files/patch-squid_kerb_auth b/www/squid31/files/patch-squid_kerb_auth
new file mode 100644
index 000000000000..359bc6f68ca2
--- /dev/null
+++ b/www/squid31/files/patch-squid_kerb_auth
@@ -0,0 +1,468 @@
+This file contains various patches that in general try to enable the
+compilation of the squid_kerb_auth authentication helper program on
+all versions of FreeBSD that are currently supported by the FreeBSD
+ports framework where Heimdal is part of the base system.
+
+--- configure.orig	2008-12-23 05:19:34.000000000 +0100
++++ configure	2008-12-24 15:05:33.000000000 +0100
+@@ -964,6 +964,9 @@
+ NTLM_AUTH_HELPERS
+ NEGOTIATE_AUTH_HELPERS
+ DIGEST_AUTH_HELPERS
++KRB5CONFIG
++KERBLIBS
++KERBINC
+ EXTERNAL_ACL_HELPERS
+ LIBSASL
+ ENABLE_UNLINKD_TRUE
+@@ -23261,6 +23264,368 @@
+ fi
+ 
+ 
++
++if `echo "$NEGOTIATE_AUTH_HELPERS" | grep -q squid_kerb_auth`; then
++    # Extract the first word of "krb5-config", so it can be a program name with args.
++set dummy krb5-config; ac_word=$2
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_path_KRB5CONFIG+set}" = set; then
++  $as_echo_n "(cached) " >&6
++else
++  case $KRB5CONFIG in
++  [\\/]* | ?:[\\/]*)
++  ac_cv_path_KRB5CONFIG="$KRB5CONFIG" # Let the user override the test with a path.
++  ;;
++  *)
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_path_KRB5CONFIG="$as_dir/$ac_word$ac_exec_ext"
++    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++IFS=$as_save_IFS
++
++  test -z "$ac_cv_path_KRB5CONFIG" && ac_cv_path_KRB5CONFIG="false"
++  ;;
++esac
++fi
++KRB5CONFIG=$ac_cv_path_KRB5CONFIG
++if test -n "$KRB5CONFIG"; then
++  { $as_echo "$as_me:$LINENO: result: $KRB5CONFIG" >&5
++$as_echo "$KRB5CONFIG" >&6; }
++else
++  { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++    if test -z "$KRB5CONFIG"; then
++	{ { $as_echo "$as_me:$LINENO: error: sorry" >&5
++$as_echo "$as_me: error: sorry" >&2;}
++   { (exit need krb5-config to determine compilation settings); exit need krb5-config to determine compilation settings; }; }
++    else
++	KERBLIBS=`$KRB5CONFIG --libs gssapi`
++	KERBINC=`$KRB5CONFIG --cflags`
++
++
++    fi
++
++for ac_header in gssapi/gssapi.h
++do
++as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
++$as_echo_n "checking for $ac_header... " >&6; }
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  $as_echo_n "(cached) " >&6
++fi
++ac_res=`eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'`
++	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++else
++  # Is the header compilable?
++{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
++$as_echo_n "checking $ac_header usability... " >&6; }
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_includes_default
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++  (eval "$ac_compile") 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && {
++	 test -z "$ac_c_werror_flag" ||
++	 test ! -s conftest.err
++       } && test -s conftest.$ac_objext; then
++  ac_header_compiler=yes
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++	ac_header_compiler=no
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++$as_echo "$ac_header_compiler" >&6; }
++
++# Is the header present?
++{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
++$as_echo_n "checking $ac_header presence... " >&6; }
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <$ac_header>
++_ACEOF
++if { (ac_try="$ac_cpp conftest.$ac_ext"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null && {
++	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
++	 test ! -s conftest.err
++       }; then
++  ac_header_preproc=yes
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  ac_header_preproc=no
++fi
++
++rm -f conftest.err conftest.$ac_ext
++{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++$as_echo "$ac_header_preproc" >&6; }
++
++# So?  What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
++  yes:no: )
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++    ac_header_preproc=yes
++    ;;
++  no:yes:* )
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
++$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
++$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++    ( cat <<\_ASBOX
++## ----------------------------------------------- ##
++## Report this to http://www.squid-cache.org/bugs/ ##
++## ----------------------------------------------- ##
++_ASBOX
++     ) | sed "s/^/$as_me: WARNING:     /" >&2
++    ;;
++esac
++{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
++$as_echo_n "checking for $ac_header... " >&6; }
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  $as_echo_n "(cached) " >&6
++else
++  eval "$as_ac_Header=\$ac_header_preproc"
++fi
++ac_res=`eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'`
++	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++
++fi
++if test `eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'` = yes; then
++  cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++    if test x"$ac_cv_header_gssapi_gssapi_h" != x"yes"; then
++
++for ac_header in gssapi.h
++do
++as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
++$as_echo_n "checking for $ac_header... " >&6; }
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  $as_echo_n "(cached) " >&6
++fi
++ac_res=`eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'`
++	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++else
++  # Is the header compilable?
++{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
++$as_echo_n "checking $ac_header usability... " >&6; }
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_includes_default
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (ac_try="$ac_compile"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++  (eval "$ac_compile") 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && {
++	 test -z "$ac_c_werror_flag" ||
++	 test ! -s conftest.err
++       } && test -s conftest.$ac_objext; then
++  ac_header_compiler=yes
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++	ac_header_compiler=no
++fi
++
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++$as_echo "$ac_header_compiler" >&6; }
++
++# Is the header present?
++{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
++$as_echo_n "checking $ac_header presence... " >&6; }
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <$ac_header>
++_ACEOF
++if { (ac_try="$ac_cpp conftest.$ac_ext"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
++$as_echo "$ac_try_echo") >&5
++  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null && {
++	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
++	 test ! -s conftest.err
++       }; then
++  ac_header_preproc=yes
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  ac_header_preproc=no
++fi
++
++rm -f conftest.err conftest.$ac_ext
++{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++$as_echo "$ac_header_preproc" >&6; }
++
++# So?  What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
++  yes:no: )
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++    ac_header_preproc=yes
++    ;;
++  no:yes:* )
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
++$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
++$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++    ( cat <<\_ASBOX
++## ----------------------------------------------- ##
++## Report this to http://www.squid-cache.org/bugs/ ##
++## ----------------------------------------------- ##
++_ASBOX
++     ) | sed "s/^/$as_me: WARNING:     /" >&2
++    ;;
++esac
++{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
++$as_echo_n "checking for $ac_header... " >&6; }
++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
++  $as_echo_n "(cached) " >&6
++else
++  eval "$as_ac_Header=\$ac_header_preproc"
++fi
++ac_res=`eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'`
++	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++
++fi
++if test `eval 'as_val=${'$as_ac_Header'}
++		 $as_echo "$as_val"'` = yes; then
++  cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++else
++  { { $as_echo "$as_me:$LINENO: error: neither <gssapi/gssapi.h> nor <gssapi.h> found" >&5
++$as_echo "$as_me: error: neither <gssapi/gssapi.h> nor <gssapi.h> found" >&2;}
++   { (exit 1); exit 1; }; }
++
++fi
++
++done
++
++    fi
++fi
++
+ # Check whether --enable-ntlm-fail-open was given.
+ if test "${enable_ntlm_fail_open+set}" = set; then
+   enableval=$enable_ntlm_fail_open;  if test "$enableval" = "yes" ; then
+--- include/autoconf.h.in.orig	2008-12-23 05:19:29.000000000 +0100
++++ include/autoconf.h.in	2008-12-24 15:05:33.000000000 +0100
+@@ -188,6 +188,12 @@
+ /* Define to 1 if you have the `htole16' function. */
+ #undef HAVE_HTOLE16
+ 
++/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
++#undef HAVE_GSSAPI_GSSAPI_H
++
++/* Define to 1 if you have the <gssapi.h> header file. */
++#undef HAVE_GSSAPI_H
++
+ /* Define to 1 if you have the `initgroups' function. */
+ #undef HAVE_INITGROUPS
+ 
+--- helpers/negotiate_auth/squid_kerb_auth/Makefile.in.orig	2008-12-23 05:19:26.000000000 +0100
++++ helpers/negotiate_auth/squid_kerb_auth/Makefile.in	2008-12-24 15:05:33.000000000 +0100
+@@ -154,6 +154,18 @@
+ INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ INSTALL_SCRIPT = @INSTALL_SCRIPT@
+ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++#-L$(top_builddir)/lib -lmiscutil $(XTRA_LIBS)
++
++# HEIMDAL
++#KERBINC = -DHEIMDAL -I/usr/include/heimdal
++#KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken
++
++# MIT
++#KERBINC = 
++#KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
++KERBINC = -DHEIMDAL @KERBINC@
++KERBLIBS = @KERBLIBS@
++KRB5CONFIG = @KRB5CONFIG@
+ LDFLAGS = @LDFLAGS@
+ LIBADD_DL = @LIBADD_DL@
+ LIBOBJS = @LIBOBJS@
+@@ -305,15 +317,6 @@
+ squid_kerb_auth_SOURCES = $(SOURCE) $(SPNEGO)
+ #-I$(top_srcdir)/include -I$(top_srcdir)/src
+ LDADD = $(KERBLIBS)
+-#-L$(top_builddir)/lib -lmiscutil $(XTRA_LIBS)
+-
+-# HEIMDAL
+-#KERBINC = -DHEIMDAL -I/usr/include/heimdal
+-#KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken
+-
+-# MIT
+-KERBINC = 
+-KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
+ all: all-am
+ 
+ .SUFFIXES:
+--- helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c.orig	2008-12-23 05:19:29.000000000 +0100
++++ helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c	2008-12-24 15:05:33.000000000 +0100
+@@ -24,6 +24,7 @@
+ /*
+  * Hosted at http://sourceforge.net/projects/squidkerbauth
+  */
++#include "config.h"
+ #include <string.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+@@ -31,6 +32,7 @@
+ #include <unistd.h>
+ #include <time.h>
+ #include <sys/time.h>
++#include <sys/param.h>
+ 
+ #include "base64.h"
+ #ifndef HAVE_SPNEGO
+@@ -51,7 +53,11 @@
+ #define PROGRAM "squid_kerb_auth"
+ 
+ #ifdef HEIMDAL
++#ifdef HAVE_GSSAPI_GSSAPI_H
++#include <gssapi/gssapi.h>
++#else
+ #include <gssapi.h>
++#endif
+ #define gss_nt_service_name GSS_C_NT_HOSTBASED_SERVICE
+ #else
+ #include <gssapi/gssapi.h>