The KDE FreeBSD team is proud to announce the release of KDE 4.1.0

for FreeBSD. The official KDE 4.1.0 release notes can be found at
http://www.kde.org/announcements/4.1/.

Some note:

* Prefix
KDE4 will be install into a custom prefixes namely ${LOCALBASE}/kde4.
KDE4 and KDE3 can co-exist

* Sound
For sound to work, it is necessary to have dbus and hal enabled
in your system. Please see the respective documentation on how
to enable these.

For more Informations see the HEADS UP at ports@ and kde-freebsd@
or our wiki page http://wiki.freebsd.org/KDE4/Install.

Have fun!

7 files changed, 48 insertions, 715 deletions

diff --git a/x11/kde4/Makefile b/x11/kde4/Makefile
index ac5a553d427d..886d2fa1eac0 100644
--- a/x11/kde4/Makefile
+++ b/x11/kde4/Makefile
@@ -1,14 +1,12 @@
-# -*-mode: makefile-*-
-# New ports collection makefile for:	KDE3
-# Date created:				Sun May 14 2000 00:50:02
-# Whom:					Will Andrews <will@FreeBSD.org>
+# New ports collection makefile for:	KDE4
+# Date created:				Feb 28 2008
+# Whom:					Will Andrews <miwi@FreeBSD.org>
 #
 # $FreeBSD$
 #
 
-PORTNAME?=	kde
-PORTVERSION=	${KDE_VERSION}
-PORTREVISION=	2
+PORTNAME?=	kde4
+PORTVERSION=	${KDE4_VERSION}
 CATEGORIES=	x11 kde
 MASTER_SITES=	# empty
 DISTFILES=	# none
@@ -17,158 +15,70 @@ EXTRACT_ONLY=	# empty
 MAINTAINER=	kde@FreeBSD.org
 COMMENT?=	The "meta-port" for KDE
 
-# This port conflicts with the kde-lite port, so make it known.
-.if defined(IS_INTERACTIVE)
-CONFLICTS?=	kde-lite-[0-9]*
-.endif
-
-## This is the file where the selections made in the interactive dialog
-## are saved in and initialized from.
-
-.if defined(KDE_PREFIX)
-CONFIG_FILE=	${KDE_PREFIX}/etc/kde-meta.conf
-.else
-CONFIG_FILE=	${LOCALBASE}/etc/kde-meta.conf
-.endif
-
-## The list of all modules that make up KDE, excluding the base modules
-## arts, kdebase and kdelibs
-
-ALL_MODULES=	KDEACCESSIBILITY KDEADMIN KDEARTWORK KDEVELOP KDEEDU\
-		KDEGAMES KDEGRAPHICS KDEMULTIMEDIA KDENETWORK KOFFICE KDEPIM\
-		KDESDK KDETOYS KDEUTILS KDEWEBDEV
-
-## Forwards parts of the environment to scripts/configure.kde3
-
-SCRIPTS_ENV+=	ALL_MODULES="${ALL_MODULES}" \
-		BATCH="${BATCH}" \
-		CAT="${CAT}" \
-		CONFIG_FILE="${CONFIG_FILE}" \
-		CURDIR="${CURDIR}" \
-		ECHO="${ECHO}" \
-		ECHO_MSG="${ECHO_MSG}" \
-		GREP="${GREP}" \
-		MKDIR="${MKDIR}" \
-		PKG_DELETE="${PKG_DELETE}" \
-		PKG_INFO="${PKG_INFO}" \
-		REINPLACE_CMD="${REINPLACE_CMD}" \
-		SED="${SED}" \
-		TOUCH="${TOUCH}" \
-		TR="/usr/bin/tr" \
-		WRKDIRPREFIX="${WRKDIRPREFIX}"
-
-## If MINIMAL_KDE is defined, define WITHOUT_FOO for every
-## module there is.
-
-.if defined(MINIMAL_KDE)
-.for module in ${ALL_MODULES}
-WITHOUT_${module}=yes
-.endfor
-.endif
+OPTIONS=	KDEACCESSIBILITY "Accessibility applications" on \
+		KDEADMIN "KDE Administration applications" on \
+    		KDEARTWORK "Additional themes, sounds, etc" on \
+		KDEGAMES "Games like kolf, patience, atlantik, etc" on \
+		KDEEDU "Educational applications" on \
+		KDEGRAPHICS "Graphics utilities like kview, kpaint, etc" on \
+		KDENETWORK "Network-related programs like kopete, etc" on \
+		KDEMULTIMEDIA "Multimedia utilities like noatun, etc" on \
+		KDEPIM "Personal Information Management: mail, etc" on \
+		KDEPLASMA "Extra plasmoids for KDE" on \
+		KDESDK "KDE software development kit" on \
+		KDETOYS "Miscellaneous small applications" on \
+		KDEUTILS "Utilities like kcalc, kcharselect, etc" on \
+		KDEWEBDEV "Website development environment" on
+
+USE_KDE4=	kdelibs kdebase pimlibs workspace kdeprefix runtime
+NO_BUILD=	yes
 
-## If the user has some WITHOUT_FOO stuff set that matters to us,
-## define BATCH so interactive configuration will be skipped.
+.include <bsd.port.pre.mk>
 
-.for module in ${ALL_MODULES}
-.if defined(WITHOUT_${module})
-BATCH=		yes
+.if !defined(WITHOUT_KDEACCESSIBILITY)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kmag:${PORTSDIR}/accessibility/kdeaccessibility4
 .endif
-.endfor
-
-## If the user (or the packagecluster) defines batchprocessing, skip
-## the interactive configuration. Otherwise declare this port properly
-## as interactive, launch the selector script cand include the configuration
-## file that's being returned by it (Makefile.inc). Remove the file on make
-## clean.
-
-.if !defined(BATCH) && !defined(PACKAGE_BUILDING) && !defined(MINIMAL_KDE)
-IS_INTERACTIVE=	yes
-PLIST_SUB+=	IS_INTERACTIVE=""
-.else
-PLIST_SUB+=	IS_INTERACTIVE="@comment "
+.if !defined(WITHOUT_KDEADMIN)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kuser:${PORTSDIR}/sysutils/kdeadmin4
 .endif
-
-.if !defined(BATCH)
-pre-fetch:
-	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
-	@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.kde3
-
-post-configure:
-	@/usr/bin/clear
-	@${CAT} ${FILESDIR}/post-configure-message
-
-post-clean:
-	@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
-
-.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
-.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
+.if !defined(WITHOUT_KDEARTWORK)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kbanner.kss:${PORTSDIR}/x11-themes/kdeartwork4
 .endif
-
-.endif # !defined(BATCH)
-
-## Allow to turn off every optional bit of KDE.
-
 .if !defined(WITHOUT_KDEGAMES)
-RUN_DEPENDS+=	kjumpingcube:${PORTSDIR}/games/kdegames3
+RUN_DEPENDS+=	${KDE4_PREFIX}/bin/kjumpingcube:${PORTSDIR}/games/kdegames4
 .endif
-.if !defined(WITHOUT_KDEUTILS)
-RUN_DEPENDS+=	kdessh:${PORTSDIR}/misc/kdeutils3
+.if !defined(WITHOUT_KDEEDU)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/khangman:${PORTSDIR}/misc/kdeedu4
 .endif
-.if !defined(WITHOUT_KOFFICE)
-RUN_DEPENDS+=	kword:${PORTSDIR}/editors/koffice-kde3
+.if !defined(WITHOUT_KDEGRAPHICS)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/gwenview:${PORTSDIR}/graphics/kdegraphics4
 .endif
 .if !defined(WITHOUT_KDENETWORK)
-RUN_DEPENDS+=	kppp:${PORTSDIR}/net/kdenetwork3
-.endif
-.if !defined(WITHOUT_KDEGRAPHICS)
-RUN_DEPENDS+=	kview:${PORTSDIR}/graphics/kdegraphics3
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kppp:${PORTSDIR}/net/kdenetwork4
 .endif
 .if !defined(WITHOUT_KDEMULTIMEDIA)
-RUN_DEPENDS+=	kmix:${PORTSDIR}/multimedia/kdemultimedia3
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kmix:${PORTSDIR}/multimedia/kdemultimedia4
 .endif
 .if !defined(WITHOUT_KDEPIM)
-RUN_DEPENDS+=	korganizer:${PORTSDIR}/deskutils/kdepim3
+RUN_DEPENDS+=	${KDE4_PREFIX}/bin/korganizer:${PORTSDIR}/deskutils/kdepim4
 .endif
-.if !defined(WITHOUT_KDESDK)
-RUN_DEPENDS+=	cervisia:${PORTSDIR}/devel/kdesdk3
+.if !defined(WITHOUT_KDEPLASMA)
+RUN_DEPENDS+=	kdeplasma-addons>=4:${PORTSDIR}/deskutils/kdeplasma-addons
 .endif
-.if !defined(WITHOUT_KDEVELOP)
-RUN_DEPENDS+=	kdevelop:${PORTSDIR}/devel/kdevelop
+.if !defined(WITHOUT_KDETOYS)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/amor:${PORTSDIR}/x11-clocks/kdetoys4
 .endif
-.if !defined(WITHOUT_KDEEDU)
-RUN_DEPENDS+=	khangman:${PORTSDIR}/misc/kdeedu3
+.if !defined(WITHOUT_KDESDK)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/cervisia:${PORTSDIR}/devel/kdesdk4
 .endif
-.if !defined(WITHOUT_KDEADMIN)
-RUN_DEPENDS+=	kcron:${PORTSDIR}/sysutils/kdeadmin3
+.if !defined(WITHOUT_KDEUTILS)
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kdessh:${PORTSDIR}/misc/kdeutils4
 .endif
 .if !defined(WITHOUT_KDEWEBDEV)
-RUN_DEPENDS+=	quanta:${PORTSDIR}/www/kdewebdev
+RUN_DEPENDS+=   ${KDE4_PREFIX}/bin/kommander:${PORTSDIR}/www/kdewebdev4
 .endif
-.if !defined(WITHOUT_KDETOYS)
-RUN_DEPENDS+=	amor:${PORTSDIR}/x11-clocks/kdetoys3
-.endif
-.if !defined(WITHOUT_KDEARTWORK)
-RUN_DEPENDS+=	kbanner.kss:${PORTSDIR}/x11-themes/kdeartwork3
-.endif
-.if !defined(WITHOUT_KDEACCESSIBILITY)
-RUN_DEPENDS+=	kmag:${PORTSDIR}/accessibility/kdeaccessibility
-.endif
-
-.if make(package)
-DEPENDS_TARGET="package"
-.endif # .if make(package)
-
-USE_KDELIBS_VER=3
-USE_KDEBASE_VER=3
-
-NO_BUILD=	yes
-
-## Copy Makefile.inc to ${OPTION_FILE} where it will serve as memory of the
-## user's last selection.
 
 do-install:
-.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
-	@${INSTALL_DATA} ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc ${CONFIG_FILE}
-.endif
+	${DO_NADA}
 
-.include <bsd.port.mk>
+.include <bsd.port.post.mk>
diff --git a/x11/kde4/Makefile.kde b/x11/kde4/Makefile.kde
deleted file mode 100644
index 56a2fde811d0..000000000000
--- a/x11/kde4/Makefile.kde
+++ /dev/null
@@ -1,121 +0,0 @@
-# This is a simple set of Makefile macros which allow the core kde ports to
-# bring these in automatically since it's tiring to modify all of them to
-# add more of these.  These don't belong in bsd.kde.mk because they aren't
-# very likely to apply outside of KDE core modules.  Nonetheless, also
-# provide variables to remove one or more of these.
-#
-# DON'T INCLUDE THIS FILE FROM YOUR PORT. THIS FILE SHOULD BE CONSIDERED OFF-
-# LIMITS FOR ANY MAINTAINER != kde@freebsd.org
-#
-# $FreeBSD$
-
-CONFIGURE_ARGS?=
-
-# Stop the docs from regenerating.
-COPY=	-c -p
-
-# For ports that have I18N components only.
-.if defined(KDE_I18N)
-_NO_KDE_FINAL=	yes
-_NO_KDE_NDEBUG=	yes
-DISTNAME?=	${PORTNAME}-${PKGNAMEPREFIX:S/-$//}-${PORTVERSION}
-# Since KDE 3.1.3, the kde-i18n tarballs have the ${KDE_VERSION}
-# as part of the name of their toplevel directory, while the
-# koffice-i18n ones have not, so we need to take care of that.
-.if ${PORTNAME}==koffice-i18n && ${PORTVERSION}!="1.3.5"
-.if !defined(DISTNAME_OVERRIDE)
-DISTNAME=	${PORTNAME:S/i18n/l10n/}-${PKGNAMEPREFIX:S/-$//}-${PORTVERSION}
-WRKSRC=		${WRKDIR}/koffice-l10n-${PKGNAMEPREFIX:S/-$//}-${PORTVERSION}
-.endif
-.endif
-DIST_SUBDIR=	KDE/kde-i18n
-
-# nasty hack to force newer timestamps on cache
-# required to enable correct building
-.if !target(post-extract)
-post-extract:
-	@${FIND} ${WRKDIR} -type f -name index.cache.bz2 \
-		| ${XARGS} -n 10 -x ${TOUCH}
-	@${TOUCH} ${WRKSRC}/config.h.in
-.endif # !target(post-extract)
-.endif # defined(KDE_I18N)
-
-.if !defined(_NO_KDE_FINAL) && defined(WANT_KDE_FINAL)
-CONFIGURE_ARGS+=--enable-final
-.endif
-
-.if !defined(_NO_KDE_NDEBUG)
-.if defined(PARALLEL_PACKAGE_BUILD) || !defined(WANT_KDE_DEBUG)
-CONFIGURE_ARGS+=--disable-debug
-.else
-CONFIGURE_ARGS+=--enable-debug=full
-STRIP= # empty
-.endif # defined(PARALLEL_PACKAGE_BUILD) || !defined(WANT_KDE_DEBUG)
-.endif # !defined(_NO_KDE_NDEBUG)
-
-.if !defined(_NO_KDE_XINERAMA)
-.if !defined(WITHOUT_XINERAMA)
-CONFIGURE_ARGS+=	--with-xinerama
-.endif
-.endif # !defined(_NO_KDE_XINERAMA)
-
-.if defined(KDE_SPLIT)
-KDE_SPLIT_VER?=	${KDE_VERSION}
-# needed for case where src dir name != doc dir name
-KDE_DOC_SPLIT?=	${KDE_SPLIT}
-DISTNAME?=	${KDE_SPLIT_DIST}-${KDE_SPLIT_VER}
-.endif
-# This must always be defined.
-SPLITDEP_PREFIX?=	${PREFIX}/share/applications
-
-# Targets section
-.if defined(KDE_SPLIT)
-kde-split:
-	${ECHO} "${KDE_SPLIT} doc" > ${WRKSRC}/inst-apps
-	${REINPLACE_CMD} \
-	"s,^SUBDIRS =.*${KDE_DOC_SPLIT}.*$$,SUBDIRS =\. ${KDE_DOC_SPLIT},g" \
-		${WRKSRC}/doc/Makefile.in
-
-kde-split-postinstall:
-	${TOUCH} ${SPLITDEP_PREFIX}/${PORTNAME}-${PORTVERSION}
-
-.if !defined(KDE_SPLIT_NONSTANDARD)
-pre-configure: kde-split
-post-install: kde-split-postinstall
-.endif
-.endif
-
-
-.if defined(KDE_I18N)
-_NO_KDE_FIXPTHREAD=	yes
-.endif
-
-.if !defined(_NO_KDE_FIXPTHREAD)
-CONFIGURE_ENV+=	PTHREAD_LIBS="${PTHREAD_LIBS}"
-
-pre-configure: kde-fix-configure kde-fix-ltmain.sh
-kde-fix-configure:
-
-kde-fix-ltmain.sh:
-
-.endif
-
-kde-version-check:
-.if exists(${LOCALBASE}/include/kfm.h)
-	@${ECHO}
-	@${ECHO} "			NOTICE"
-	@${ECHO}
-	@${ECHO} "You have KDE1 headers installed!  Installing this port"
-	@${ECHO} "will result in conflicts between KDE3 and KDE1!"
-	@${ECHO}
-	@${FALSE}
-.endif
-.if exists(${LOCALBASE}/include/defaultprogress.h)
-	@${ECHO}
-	@${ECHO} "			NOTICE"
-	@${ECHO}
-	@${ECHO} "You have KDE2 headers installed!  Installing this port"
-	@${ECHO} "will result in conflicts between KDE3 and KDE2!"
-	@${ECHO}
-	@${FALSE}
-.endif
diff --git a/x11/kde4/files/extrapatch-configure b/x11/kde4/files/extrapatch-configure
deleted file mode 100644
index 6d5f7fd39171..000000000000
--- a/x11/kde4/files/extrapatch-configure
+++ /dev/null
@@ -1,213 +0,0 @@
---- configure	Fri Oct  8 15:54:21 2004
-+++ configure	Fri Oct 29 00:27:39 2004
-@@ -31868,11 +31907,178 @@
- fi
- 
- 
--  echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
-+                LIBPTHREAD=""
-+
-+  if test -n "$PTHREAD_LIBS"; then
-+    if test "x$PTHREAD_LIBS" = "x-pthread" ; then
-+      LIBPTHREAD="PTHREAD"
-+    else
-+      PTHREAD_LIBS_save="$PTHREAD_LIBS"
-+      PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'`
-+      echo "$as_me:$LINENO: checking for pthread_create in $PTHREAD_LIBS" >&5
-+echo $ECHO_N "checking for pthread_create in $PTHREAD_LIBS... $ECHO_C" >&6
-+
-+     kde_save_LDFLAGS="$LDFLAGS"
-+          kde_save_LIBS="$LIBS"
-+     LDFLAGS="$LDFLAGS $all_libraries"
-+     case $host_os in
-+      aix*) LDFLAGS="-brtl $LDFLAGS"
-+	test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS"
-+	;;
-+     esac
-+     as_ac_Lib=`echo "ac_cv_lib_$PTHREAD_LIBS''_pthread_create" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for pthread_create in -l$PTHREAD_LIBS" >&5
-+echo $ECHO_N "checking for pthread_create in -l$PTHREAD_LIBS... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Lib+set}\" = set"; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-l$PTHREAD_LIBS  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+   builtin and then its argument prototype would still apply.  */
-+char pthread_create ();
-+int
-+main ()
-+{
-+pthread_create ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } &&
-+	 { ac_try='test -z "$ac_c_werror_flag"
-+			 || test ! -s conftest.err'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; } &&
-+	 { ac_try='test -s conftest$ac_exeext'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+  eval "$as_ac_Lib=yes"
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Lib=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Lib'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Lib'}'`" >&6
-+if test `eval echo '${'$as_ac_Lib'}'` = yes; then
-+  LIBPTHREAD="$PTHREAD_LIBS_save"
-+fi
-+
-+     LDFLAGS="$kde_save_LDFLAGS"
-+     LIBS="$kde_save_LIBS"
-+
-+      PTHREAD_LIBS="$PTHREAD_LIBS_save"
-+    fi
-+  fi
-+
-+  if test -z "$LIBPTHREAD"; then
-+    echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
- echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6
--  kde_safe_libs=$LIBS
--  LIBS="$LIBS -lpthread"
--  cat >conftest.$ac_ext <<_ACEOF
-+if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lpthread  $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+
-+/* Override any gcc2 internal prototype to avoid an error.  */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+   builtin and then its argument prototype would still apply.  */
-+char pthread_create ();
-+int
-+main ()
-+{
-+pthread_create ();
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } &&
-+	 { ac_try='test -z "$ac_c_werror_flag"
-+			 || test ! -s conftest.err'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; } &&
-+	 { ac_try='test -s conftest$ac_exeext'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+  ac_cv_lib_pthread_pthread_create=yes
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_pthread_pthread_create=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+      conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5
-+echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6
-+if test $ac_cv_lib_pthread_pthread_create = yes; then
-+  LIBPTHREAD="-lpthread"
-+fi
-+
-+  fi
-+
-+    if test -z "$LIBPTHREAD" ; then
-+    echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
-+echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6
-+    kde_safe_libs=$LIBS
-+    LIBS="$LIBS -lpthread"
-+    cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h.  */
- _ACEOF
- cat confdefs.h >>conftest.$ac_ext
-@@ -31910,20 +32116,25 @@
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-   (exit $ac_status); }; }; then
- 
--      echo "$as_me:$LINENO: result: yes" >&5
-+        echo "$as_me:$LINENO: result: yes" >&5
- echo "${ECHO_T}yes" >&6
--      LIBPTHREAD="-lpthread"
-+        LIBPTHREAD="-lpthread"
- else
-   echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
- 
- 
--      echo "$as_me:$LINENO: result: no" >&5
-+	echo "$as_me:$LINENO: result: no" >&5
- echo "${ECHO_T}no" >&6
- fi
- rm -f conftest.err conftest.$ac_objext \
-       conftest$ac_exeext conftest.$ac_ext
--  LIBS=$kde_safe_libs
-+    LIBS=$kde_safe_libs
-+  fi
-+
-+    if test "x$LIBPTHREAD" = "xPTHREAD" ; then
-+    LIBPTHREAD=""
-+  fi
-
diff --git a/x11/kde4/files/extrapatch-old_configure b/x11/kde4/files/extrapatch-old_configure
deleted file mode 100644
index fd5047a727e7..000000000000
--- a/x11/kde4/files/extrapatch-old_configure
+++ /dev/null
@@ -1,102 +0,0 @@
---- configure.orig	Wed Nov 10 12:14:47 2004
-+++ configure	Wed Nov 10 12:14:52 2004
-@@ -27215,11 +27215,16 @@
- 
- 
- 
--  LIBPTHREAD=""
-+                LIBPTHREAD=""
- 
-   if test -n "$PTHREAD_LIBS"; then
--    PTHREAD_LIBS_save="$PTHREAD_LIBS"
--    PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'`
-+    if test "x$PTHREAD_LIBS" = "x-pthread" ; then
-+      LIBPTHREAD="PTHREAD"
-+    else
-+      PTHREAD_LIBS_save="$PTHREAD_LIBS"
-+      PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'`
-+      echo "$as_me:$LINENO: checking for pthread_create in $PTHREAD_LIBS" >&5
-+echo $ECHO_N "checking for pthread_create in $PTHREAD_LIBS... $ECHO_C" >&6
- 
-      kde_save_LDFLAGS="$LDFLAGS"
-           kde_save_LIBS="$LIBS"
-@@ -27301,7 +27306,8 @@
-      LDFLAGS="$kde_save_LDFLAGS"
-      LIBS="$kde_save_LIBS"
- 
--    PTHREAD_LIBS="$PTHREAD_LIBS_save"
-+      PTHREAD_LIBS="$PTHREAD_LIBS_save"
-+    fi
-   fi
- 
-   if test -z "$LIBPTHREAD"; then
-@@ -27373,6 +27379,69 @@
-   LIBPTHREAD="-lpthread"
- fi
- 
-+  fi
-+
-+    if test -z "$LIBPTHREAD" ; then
-+    echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
-+echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6
-+    kde_safe_libs=$LIBS
-+    LIBS="$LIBS -lpthread"
-+    cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h.  */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h.  */
-+#include <pthread.h>
-+int
-+main ()
-+{
-+(void)pthread_create(0,0,0,0);
-+  ;
-+  return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+  (eval $ac_link) 2>conftest.er1
-+  ac_status=$?
-+  grep -v '^ *+' conftest.er1 >conftest.err
-+  rm -f conftest.er1
-+  cat conftest.err >&5
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); } &&
-+	 { ac_try='test -z "$ac_c_werror_flag"
-+			 || test ! -s conftest.err'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; } &&
-+	 { ac_try='test -s conftest$ac_exeext'
-+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+  (eval $ac_try) 2>&5
-+  ac_status=$?
-+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+  (exit $ac_status); }; }; then
-+
-+        echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+        LIBPTHREAD="-lpthread"
-+else
-+  echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
-+	echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+      conftest$ac_exeext conftest.$ac_ext
-+    LIBS=$kde_safe_libs
-+  fi
-+
-+    if test "x$LIBPTHREAD" = "xPTHREAD" ; then
-+    LIBPTHREAD=""
-   fi
- 
- 
diff --git a/x11/kde4/files/post-configure-message b/x11/kde4/files/post-configure-message
deleted file mode 100644
index 6d3af1126ef9..000000000000
--- a/x11/kde4/files/post-configure-message
+++ /dev/null
@@ -1,12 +0,0 @@
-Configuration and first installation step finished. Run 'make install' to
-install the rest of the modules you selected. Run 'make clean && make' to
-re-enter the configuration. Please note that you CANNOT REMOVE modules
-through this menu system, use pkg_delete instead.
-
-If you do not want the menu to run, put BATCH=YES into /etc/make.conf
-(this will install all KDE modules).
-
-If you do not want the menu to run AND you do not want specific
-modules to be installed, put lines reading 'WITHOUT_<Name-of-Module>=YES'
-into /etc/make.conf (for example WITHOUT_KOFFICE=YES).
-
diff --git a/x11/kde4/pkg-plist b/x11/kde4/pkg-plist
deleted file mode 100644
index d5d8d29f02ca..000000000000
--- a/x11/kde4/pkg-plist
+++ /dev/null
@@ -1 +0,0 @@
-%%IS_INTERACTIVE%%etc/kde-meta.conf
diff --git a/x11/kde4/scripts/configure.kde3 b/x11/kde4/scripts/configure.kde3
deleted file mode 100644
index a3cfafc8d9ae..000000000000
--- a/x11/kde4/scripts/configure.kde3
+++ /dev/null
@@ -1,128 +0,0 @@
-#!/bin/sh
-
-## Create four tempfiles: A tempfile to store the selection from the menu in,
-## one to store the same selection after some transformation (for comm), one to
-## store the contents of ${ALL_MODULES} (also for comm) and one to store
-## the output of pkg_info.
-
-tempselection=`mktemp -t selection`
-tempprocessed=`mktemp -t processed`
-tempallmodules=`mktemp -t allmodules`
-tempinstalled=`mktemp -t installed`
-
-## By default, preselect all modules. 
-
-for i in `${ECHO} "${ALL_MODULES}" | ${TR} '[:upper:]' '[:lower:]'`
-	do
-		eval status_$i=ON
-	done
-
-## If a configfile exists and has actual content, parse it and un-select
-## modules accordingly (the configfile is supposed to contain WITHOUT_FOO=yes)
-## lines. We don't check what's really in there, it shouldn't do harm when we
-## set bogus shell variables.
-
-if [ -s "${CONFIG_FILE}" ]; then
-	for i in `${CAT} ${CONFIG_FILE} | ${TR} '[:upper:]' '[:lower:]' \
-	| ${SED} -E -e 's/without_//g' -e 's/=yes//g'`
-	do
-		eval status_$i=OFF
-	done
-
-	## Try to be ubersmart: Check for all installed packages and preselect
-	## them. This catches the case where people have added ports without the
-	## the metaport, run the metaport again and wonder why they have parts
-	## of KDE installed afterwards that were not selected.
-	## 
-	## Bugs: This metaport can check for existing packages, but it cannot
-	## 	 remove packages the user explicitly unselects, but which are
-	##	 already installed.
-
-	if [ -f $tempinstalled ];then
-		${ECHO_MSG}
-		${ECHO_MSG} -n "   Looking for installed modules."
-
-		for i in `${ECHO} "${ALL_MODULES}" | ${TR} '[:upper:]' '[:lower:]'`
-		do
-			${PKG_INFO} | ${GREP} $i | ${SED} -e 's/-.*//g' >> $tempinstalled
-			${ECHO_MSG} -n "."
-		done
-
-		for i in `${CAT} $tempinstalled`
-		do
-			eval status_$i=ON
-		done
-	fi
-fi
-
-## Run the menu dialog, except BATCH is defined. We define BATCH automatically
-## if people have WITH_FOO* set in their make.conf or on the commandline.
-## Actually, we don't even run this whole script at all if BATCH is defined...
-## But I'll leave it in just in case, and also as a reference to andreas@
-## who came up with this kind of configuration magic first and from whose ports
-## I've stolen it all. Save the results in the tempselection tempfile.
-
-if [ -z "${BATCH}" ]; then
-	/usr/bin/dialog --title "K Desktop Environment Customized Installation" --clear \
-	--checklist "\n\
-Please select what additional KDE modules you would like to install.\n\n" \
--1 -1 15 \
-"KDEACCESS."    "Accessibility applications for KDE" "$status_kdeaccessibility" \
-"KDEADMIN"      "KDE applications related to system administration" "$status_kdeadmin" \
-"KDEARTWORK"    "Additional themes, sounds, wallpapers and window styles" "$status_kdeartwork" \
-"KDEVELOP"      "Powerful IDE for developing KDE/Qt-based applications" "$status_kdevelop" \
-"KDEEDU"        "Collection of entertaining, educational programs" "$status_kdeedu" \
-"KDEGAMES"      "Games like kolf, patience, atlantik, etc" "$status_kdegames" \
-"KDEGRAPHICS"   "Graphics utilities like kview, kpaint, kghostview, etc" "$status_kdegraphics" \
-"KDEMULTIMEDIA" "Multimedia utilities like noatun, kmix, etc" "$status_kdemultimedia" \
-"KDENETWORK"    "Network-related programs like kopete, kppp, etc" "$status_kdenetwork" \
-"KOFFICE"       "Office Suite including wordprocessor, spreadsheet, etc" "$status_koffice" \
-"KDEPIM"        "Personal Information Management: Mail, News, Calendar" "$status_kdepim" \
-"KDESDK"        "KDE software development kit" "$status_kdesdk" \
-"KDETOYS"       "Miscellaneous small applications" "$status_kdetoys" \
-"KDEUTILS"      "Utilities like kcalc, kcharselect, ark, kedit, etc" "$status_kdeutils" \
-"KDEWEBDEV"     "Comprehensive website development environment" "$status_kdewebdev" \
-2> $tempselection
-
-	## Save the return value from dialog.
-
-	retval=$?
-
-	##  Write out all the module names into a newline-delimited list...
-
-	if [ -f $tempallmodules ]; then
-		${ECHO} "$ALL_MODULES" | ${SED} -E -e 's/[[:space:]]+/ /g' | ${TR} '[:space:]' '\n' | sort > $tempallmodules
-	fi
-
-	## ...do the same for the selection made in the dialog, comm -23 the
-	## two files to get the delta and set that as shell variables.
-
-	if [ -s $tempselection ]; then
-		${CAT} $tempselection | ${SED} -E -e 's/KDEACCESS./KDEACCESSIBILITY/g' -e 's/[[:space:]]+/ /g' \
-		-e 's/"//g' | ${TR} '[:space:]' '\n' | sort > $tempprocessed
-		set `/usr/bin/comm -23 $tempallmodules $tempprocessed`
-	fi
-
-	## Clean out the tempfiles.
-
-	rm -f $tempselection $tempprocessed $tempallmodules $tempinstalled
-
-	## If the user selected "Cancel" in the dialog, exit.
-
-	if [ $retval = 1 ]; then
-		${ECHO_MSG} "Aborting"
-		exit 1
-	fi
-fi
-
-## Create Makefile.inc
-
-${MKDIR} -p ${WRKDIRPREFIX}${CURDIR}
-${TOUCH} ${WRKDIRPREFIX}${CURDIR}/Makefile.inc
-
-## Populate Makefile.inc by writing out the delta we saved above.
-
-while [ $1 ]; do
-	${ECHO} "WITHOUT_$1=yes" >> ${WRKDIRPREFIX}${CURDIR}/Makefile.inc;
-	shift
-done