Remove this file: no longer needed for metaport.

1 files changed, 0 insertions, 244 deletions

diff --git a/x11/XFree86-4/scripts/configure b/x11/XFree86-4/scripts/configure
deleted file mode 100644
index 0a037abb8484..000000000000
--- a/x11/XFree86-4/scripts/configure
+++ /dev/null
@@ -1,244 +0,0 @@
-#!/bin/sh
-
-answset () {
-  if [ -n "$NO_INPUT" ]; then
-    echo "$2 [$1]"
-    answ=$1
-  else
-    answ=X
-  fi
-}
-
-yesno () {
-  answset $1 "$2"
-  while [ $answ = X ]; do
-    echo -n "$2 [$1] "
-    read answ
-    if [ X$answ = X ]; then answ=$1; fi
-    case $answ in
-      y|yes|Y|YES) answ=YES;;
-      n|no|N|NO)   answ=NO;;
-      *) echo invalid answer
-      answ=X
-      ;;
-    esac
-  done
-}
-# workaround for compilation problems if XFree-4.0.x is installed
-if [ -e ${PREFIX}/lib/libXft.so.1 ]; then
-  r=`nm  ${PREFIX}/lib/libXft.so.1 | grep XftDirSave`
-  if [ "X$r" = X ]; then 
-    echo "you seem to have an installed XFree-4.0.x port"
-    echo "please rename or remove ${PREFIX}/lib/libXft.so.1"
-    echo "in order to avoid compilation problems"
-    exit 1
-  fi
-fi
-F=$WRKDIR/.config
-configure () {
-rm -f $F
-
-# set ProjectRoot to be ${PREFIX}
-echo "#define ProjectRoot ${PREFIX}" >>$F
-
-cat >> $F <<END
-#ifdef i386Architecture
-#define XF86CardDrivers         mga glint nv tga s3virge sis rendition \
-                                neomagic i740 tdfx savage \
-                                cirrus vmware tseng trident chips apm \
-                                GlideDriver fbdev i128 \
-                                ati AgpGartDrivers ark cyrix \
-                                siliconmotion \
-                                vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
-#else
-#define XF86CardDrivers         mga glint nv tga s3virge sis rendition \
-                                neomagic i740 tdfx savage \
-                                cirrus tseng trident chips apm \
-                                GlideDriver fbdev i128 \
-                                ati DevelDrivers ark cyrix \
-                                siliconmotion \
-                                vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
-#endif
-END
-
-cat <<EOF
-app-default files, startup configuration files, keyboard definitions
-are normally installed in /etc/X11 (so that X binaries can be mounted 
-from a read-only volume like a CD-ROM). Otherwise default files will 
-be installed under /usr/X11R6.
-EOF
-yesno YES "Install config files in /etc/X11?"
-if [ $answ = NO ]; then
-    echo '#define UseSeparateConfDir NO' >> $F
-    ETC=${PREFIX}/lib
-else
-    ETC=/etc
-fi
-
-cat <<END
- Do you want to install the default system config files? This will overwrite
- and files that you may be currently using.  This would only be required
- on a first time build.
-END
-if [ -e $ETC/X11/xdm/xdm-config ]; then
-    XDMDEFAULT=NO
-else
-    XDMDEFAULT=YES
-fi
-if [ -e $ETC/X11/xinit/xinitrc ]; then
-    XINITDEFAULT=NO
-else
-    XINITDEFAULT=YES
-fi
-if [ -e ${PREFIX}/lib/X11/fs/config ]; then
-    XFSDEFAULT=NO
-else
-    XFSDEFAULT=YES
-fi
-
-yesno $XDMDEFAULT "Install xdm config?"
-echo "#define InstallXdmConfig	$answ" >> $F
-yesno $XINITDEFAULT "Install xinit config?"
-echo "#define InstallXinitConfig $answ" >> $F
-
-yesno YES "Do you want to include support for the FontServer?"
-echo "#define  BuildFontServer $answ" >>$F
-if [ $answ = YES ]; then
-    yesno $XFSDEFAULT "Install xfs config?"
-    echo "#define InstallFSConfig $answ" >> $F
-else
-    echo "#define InstallFSConfig NO" >> $F
-fi
-
-yesno YES "Do you want support for TrueType fonts?"
-if [ $answ = NO ]; then
-    echo "#define BuildFreeType           NO" >> $F
-    echo "#define BuildXTrueType          NO" >> $F
-fi
-cat <<'END'
- Do you want to Build Fonts (Usually you only want to build and install
- fonts once, if this is a first time install you will want to build the
- fonts)
-END
-yesno YES "Build fonts?"
-echo "#define BuildFonts		$answ" >> $F
-if [ $answ = YES ]; then
-  yesno YES "Build/install the 75dpi fonts?"
-  echo "#define Build75DpiFonts	$answ" >> $F
-  yesno YES "Build/install the 100dpi fonts?"
-  echo "#define Build100DpiFonts	$answ" >> $F
-  yesno YES "Build/install the Speedo fonts?"
-  echo "#define BuildSpeedoFonts	$answ" >> $F
-  yesno YES "Build/install the Type1 fonts?"
-  echo "#define BuildType1Fonts	$answ" >> $F
-  yesno YES "Build/install the CID fonts?"
-  echo "#define BuildCIDFonts	$answ" >> $F
-  yesno YES "Build/install the Cyrillic fonts?"
-  echo "#define BuildCyrillicFonts	$answ" >> $F
-  yesno YES "Build/install the Latin2 fonts?"
-  echo "#define BuildLatin2Fonts	$answ" >> $F
-fi
-
-yesno YES "Build the servers with Extended input devices?"
-if [ $answ = NO ]; then
-  echo "#define XInputDrivers mouse"  >> $F
-else
-  echo "#define XInputDrivers mouse dynapro elo2300 elographics magellan microtouch \
-        mutouch spaceorb wacom void"  >> $F
-# XXX broken in 3.9.18
-#  if [ X${MACHINE} != X"alpha" ]; then
-#    echo "#define JoystickSupport		YES" >> $F
-#  fi
-fi
-
-yesno YES "Build PEX?"
-echo "#define BuildPexExt		$answ" >> $F
-
-yesno YES "Build Xinerama?"
-echo "#define BuildXinerama  $answ" >> $F
-
-yesno YES "Build XIE?"
-echo "#define BuildXIE		$answ" >> $F
-echo
-
-# XXX We may not want to default this to 'YES' if there are any app-default
-# files installed
-yesno YES "Install application defaults files?"
-echo "#define InstallAppDefFiles      $answ" >> $F
-
-yesno YES "Build static libraries in addition to shared libraries?"
-echo "#define ForceNormalLib		$answ" >> $F
-
-if [ ${OSVERSION} -ge 300000 ]; then
-cat <<'END'
-
- FreeBSD-3.x has support for Secure RPC.
-
- While this scheme is not used for general purpose encryption, 
- some countries restrict the use of strong cryptography.
-
-END
-yesno YES "Build with Secure RPC?"
-echo "#define HasSecureRPC		$answ" >> $F
-fi
-cat <<'END'
-
- MIT supplies an authentication mechanism that relies upon DES, this is
- called XDM-AUTHORIZATION-1.
-
- Source code for this authentication mechanism may not be exported from
- the United States, however, there are compatible replacements for this
- mechanism available elsewhere.  Also, while this scheme is not used for
- general purpose encryption,  some countries restrict the use of strong
- cryptography.
-
- If you have aquired a copy of "Wraphelp.c" and it currently resides in
- the same location as the XFree86 source or in the ports "files"
- subdirectory,  it will be copied into the right place in the X11 source
- distribution and support for this feature will be enabled if you answer
- YES to the following question.
-
- If you do not have a copy of this file, even if you answer YES to this
- question, support will not be enabled.  If you wish to change this later,
- the option controling this is contained the file xc/config/cf/xf86site.def.
-
-END
-yesno YES "Do you want to enable XDM-AUTHORIZATION-1 support?"
-cpwh=NO
-if [ $answ = YES ]; then
-    WH=$WRKDIR/xc/lib/Xdmcp/Wraphelp.c
-
-    if [ -f $WH ] ; then
-	echo "==> $WH found in source distribution."
-    elif [ -f $DISTDIR/xc/Wraphelp.c ] ; then
-	echo "==> Wraphelp.c found in DISTDIR directory, copying to source tree."
-	cpwh=$DISTDIR/xc/Wraphelp.c
-    elif [ -f $FILESDIR/Wraphelp.c ] ; then
-	echo "==> Wraphelp.c found in files directory, copying to source tree."
-	cpwh=$FILESDIR/Wraphelp.c
-    else
-      echo "==> Wraphelp.c not found, DES support NOT enabled."
-      cpwh=NO
-    fi
-fi
-if [ $cpwh != NO ]; then
-  echo "#define	HasXdmAuth		$answ"	>> $F
-fi
-
-echo
-yesno YES "Do you want to compile with PAM support?"
-echo "#define	HasPam			$answ"	>> $F
-
-echo "#define InstallXserverSetUID NO "	>> $F
-echo "#define BuildXF86DRI YES" 	>> $F
-}
-
-configure
-
-if [ X$cpwh != XNO ]; then
-  tr -d '\r' < $cpwh > $WH
-fi
-
-cat $F >>  $WRKDIR/xc/config/cf/xf86site.def
-
-exit 0