diff options
| -rw-r--r-- | mail/exim-devel/Makefile | 57 | ||||
| -rw-r--r-- | mail/exim-old/Makefile | 57 | ||||
| -rw-r--r-- | mail/exim/Makefile | 57 |
3 files changed, 87 insertions, 84 deletions
diff --git a/mail/exim-devel/Makefile b/mail/exim-devel/Makefile index 634ef9988c94..d8db87b7e0d2 100644 --- a/mail/exim-devel/Makefile +++ b/mail/exim-devel/Makefile @@ -36,29 +36,30 @@ MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH} #WITH_MYSQL= yes #WITH_PGSQL= yes -# Link against OpenSSL in the base system for STARTTLS support. -WITH_TLS?= yes - -# Enable the embedded Perl interpreter, allowing Perl subroutines to be -# called during string expansion. -WITH_PERL?= yes - -# The following options control whether Exim is built with support for -# PAM, RFC 2195 and RFC 2595 authentication mechanisms for SMTP AUTH. -# -WITH_PAM?= yes -WITH_AUTH_CRAM_MD5?= yes -WITH_AUTH_PLAINTEXT?= yes - # If WITH_LDAP is defined, LDAP_LIB_TYPE must be one of UMICHIGAN, # NETSCAPE or SOLARIS7. LDAP_LIB_TYPE=UMICHIGAN -# The following options control whether Exim is built with support for -# additional mailbox formats. -WITH_MAILDIR?= yes -WITH_MAILSTORE?= yes -WITH_MBX?= yes +# The following options may be defined to turn off support for various +# features that this port enables by default. +# +# Do not link against OpenSSL; disables STARTTLS. +#WITHOUT_TLS= yes +# +# Disable the embedded Perl interpreter, which allows Perl subroutines to +# be called during string expansion. +#WITHOUT_PERL= yes +# +# Disable built-in Exim support for the PAM, RFC 2195 and RFC 2595 +# authentication mechanisms, used for SMTP AUTH. +#WITHOUT_PAM= yes +#WITHOUT_AUTH_CRAM_MD5= yes +#WITHOUT_AUTH_PLAINTEXT= yes +# +# Disable built-in Exim support for additional mailbox formats. +#WITHOUT_MAILDIR= yes +#WITHOUT_MAILSTORE= yes +#WITHOUT_MBX= yes # You should not need to fiddle with anything below this point. @@ -68,18 +69,18 @@ SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},' \ SEDLIST+= -e 's,^EXIM_MONITOR,\#EXIM_MONITOR,' .endif -.if defined(WITH_TLS) && ${WITH_TLS} == "yes" +.if !defined(WITHOUT_TLS) SEDLIST+= -e 's,XX_TLS_LIBS_XX,-lssl -lcrypto,' \ -e 's,^\# SUPPORT_TLS=,SUPPORT_TLS=,' .else SEDLIST+= -e 's,^TLS_LIBS,\#TLS_LIBS,' .endif -.if defined(WITH_PERL) && ${WITH_PERL} == "yes" +.if !defined(WITHOUT_PERL) SEDLIST+= -e 's,^\# EXIM_PERL=,EXIM_PERL=,' .endif -.if defined(WITH_TCP_WRAPPERS) && ${WITH_TCP_WRAPPERS} == "yes" +.if defined(WITH_TCP_WRAPPERS) SEDLIST+= -e 's,XX_TCP_WRAPPERS_LIBS_XX,-lwrap,' \ -e 's,^\# USE_TCP_WRAPPERS=,USE_TCP_WRAPPERS=,' .endif @@ -104,18 +105,18 @@ SEDLIST+= -e 's,XX_MYSQL_LIBS_XX,-L${PREFIX}/lib/mysql -lmysqlclient,' \ SEDLIST+= -e 's,XX_MYSQL_[^ ]*_XX,,' .endif -.if defined(WITH_PAM) && ${WITH_PAM} == "yes" +.if !defined(WITHOUT_PAM) SEDLIST+= -e 's,XX_PAM_LIBS_XX,-lpam,' \ -e 's,^\# SUPPORT_PAM=,SUPPORT_PAM=,' .else SEDLIST+= -e 's,XX_PAM_LIBS_XX,,' .endif -.if defined(WITH_AUTH_CRAM_MD5) && ${WITH_AUTH_CRAM_MD5} == "yes" +.if !defined(WITHOUT_AUTH_CRAM_MD5) SEDLIST+= -e 's,^\# AUTH_CRAM_MD5=,AUTH_CRAM_MD5=,' .endif -.if defined(WITH_AUTH_PLAINTEXT) && ${WITH_AUTH_PLAINTEXT} == "yes" +.if !defined(WITHOUT_AUTH_PLAINTEXT) SEDLIST+= -e 's,^\# AUTH_PLAINTEXT=,AUTH_PLAINTEXT=,' .endif @@ -133,15 +134,15 @@ SEDLIST+= -e 's,^LOOKUP_LIBS,\#LOOKUP_LIBS,' \ -e 's,^LOOKUP_INCLUDE,\#LOOKUP_INCLUDE,' .endif -.if defined(WITH_MAILDIR) && ${WITH_MAILDIR} == "yes" +.if !defined(WITHOUT_MAILDIR) SEDLIST+= -e 's,^\# SUPPORT_MAILDIR=,SUPPORT_MAILDIR=,' .endif -.if defined(WITH_MAILSTORE) && ${WITH_MAILSTORE} == "yes" +.if !defined(WITH_MAILSTORE) SEDLIST+= -e 's,^\# SUPPORT_MAILSTORE=,SUPPORT_MAILSTORE=,' .endif -.if defined(WITH_MAILMBX) && ${WITH_MAILMBX} == "yes" +.if !defined(WITH_MAILMBX) SEDLIST+= -e 's,^\# SUPPORT_MBX=,SUPPORT_MBX=,' .endif diff --git a/mail/exim-old/Makefile b/mail/exim-old/Makefile index 634ef9988c94..d8db87b7e0d2 100644 --- a/mail/exim-old/Makefile +++ b/mail/exim-old/Makefile @@ -36,29 +36,30 @@ MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH} #WITH_MYSQL= yes #WITH_PGSQL= yes -# Link against OpenSSL in the base system for STARTTLS support. -WITH_TLS?= yes - -# Enable the embedded Perl interpreter, allowing Perl subroutines to be -# called during string expansion. -WITH_PERL?= yes - -# The following options control whether Exim is built with support for -# PAM, RFC 2195 and RFC 2595 authentication mechanisms for SMTP AUTH. -# -WITH_PAM?= yes -WITH_AUTH_CRAM_MD5?= yes -WITH_AUTH_PLAINTEXT?= yes - # If WITH_LDAP is defined, LDAP_LIB_TYPE must be one of UMICHIGAN, # NETSCAPE or SOLARIS7. LDAP_LIB_TYPE=UMICHIGAN -# The following options control whether Exim is built with support for -# additional mailbox formats. -WITH_MAILDIR?= yes -WITH_MAILSTORE?= yes -WITH_MBX?= yes +# The following options may be defined to turn off support for various +# features that this port enables by default. +# +# Do not link against OpenSSL; disables STARTTLS. +#WITHOUT_TLS= yes +# +# Disable the embedded Perl interpreter, which allows Perl subroutines to +# be called during string expansion. +#WITHOUT_PERL= yes +# +# Disable built-in Exim support for the PAM, RFC 2195 and RFC 2595 +# authentication mechanisms, used for SMTP AUTH. +#WITHOUT_PAM= yes +#WITHOUT_AUTH_CRAM_MD5= yes +#WITHOUT_AUTH_PLAINTEXT= yes +# +# Disable built-in Exim support for additional mailbox formats. +#WITHOUT_MAILDIR= yes +#WITHOUT_MAILSTORE= yes +#WITHOUT_MBX= yes # You should not need to fiddle with anything below this point. @@ -68,18 +69,18 @@ SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},' \ SEDLIST+= -e 's,^EXIM_MONITOR,\#EXIM_MONITOR,' .endif -.if defined(WITH_TLS) && ${WITH_TLS} == "yes" +.if !defined(WITHOUT_TLS) SEDLIST+= -e 's,XX_TLS_LIBS_XX,-lssl -lcrypto,' \ -e 's,^\# SUPPORT_TLS=,SUPPORT_TLS=,' .else SEDLIST+= -e 's,^TLS_LIBS,\#TLS_LIBS,' .endif -.if defined(WITH_PERL) && ${WITH_PERL} == "yes" +.if !defined(WITHOUT_PERL) SEDLIST+= -e 's,^\# EXIM_PERL=,EXIM_PERL=,' .endif -.if defined(WITH_TCP_WRAPPERS) && ${WITH_TCP_WRAPPERS} == "yes" +.if defined(WITH_TCP_WRAPPERS) SEDLIST+= -e 's,XX_TCP_WRAPPERS_LIBS_XX,-lwrap,' \ -e 's,^\# USE_TCP_WRAPPERS=,USE_TCP_WRAPPERS=,' .endif @@ -104,18 +105,18 @@ SEDLIST+= -e 's,XX_MYSQL_LIBS_XX,-L${PREFIX}/lib/mysql -lmysqlclient,' \ SEDLIST+= -e 's,XX_MYSQL_[^ ]*_XX,,' .endif -.if defined(WITH_PAM) && ${WITH_PAM} == "yes" +.if !defined(WITHOUT_PAM) SEDLIST+= -e 's,XX_PAM_LIBS_XX,-lpam,' \ -e 's,^\# SUPPORT_PAM=,SUPPORT_PAM=,' .else SEDLIST+= -e 's,XX_PAM_LIBS_XX,,' .endif -.if defined(WITH_AUTH_CRAM_MD5) && ${WITH_AUTH_CRAM_MD5} == "yes" +.if !defined(WITHOUT_AUTH_CRAM_MD5) SEDLIST+= -e 's,^\# AUTH_CRAM_MD5=,AUTH_CRAM_MD5=,' .endif -.if defined(WITH_AUTH_PLAINTEXT) && ${WITH_AUTH_PLAINTEXT} == "yes" +.if !defined(WITHOUT_AUTH_PLAINTEXT) SEDLIST+= -e 's,^\# AUTH_PLAINTEXT=,AUTH_PLAINTEXT=,' .endif @@ -133,15 +134,15 @@ SEDLIST+= -e 's,^LOOKUP_LIBS,\#LOOKUP_LIBS,' \ -e 's,^LOOKUP_INCLUDE,\#LOOKUP_INCLUDE,' .endif -.if defined(WITH_MAILDIR) && ${WITH_MAILDIR} == "yes" +.if !defined(WITHOUT_MAILDIR) SEDLIST+= -e 's,^\# SUPPORT_MAILDIR=,SUPPORT_MAILDIR=,' .endif -.if defined(WITH_MAILSTORE) && ${WITH_MAILSTORE} == "yes" +.if !defined(WITH_MAILSTORE) SEDLIST+= -e 's,^\# SUPPORT_MAILSTORE=,SUPPORT_MAILSTORE=,' .endif -.if defined(WITH_MAILMBX) && ${WITH_MAILMBX} == "yes" +.if !defined(WITH_MAILMBX) SEDLIST+= -e 's,^\# SUPPORT_MBX=,SUPPORT_MBX=,' .endif diff --git a/mail/exim/Makefile b/mail/exim/Makefile index 634ef9988c94..d8db87b7e0d2 100644 --- a/mail/exim/Makefile +++ b/mail/exim/Makefile @@ -36,29 +36,30 @@ MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH} #WITH_MYSQL= yes #WITH_PGSQL= yes -# Link against OpenSSL in the base system for STARTTLS support. -WITH_TLS?= yes - -# Enable the embedded Perl interpreter, allowing Perl subroutines to be -# called during string expansion. -WITH_PERL?= yes - -# The following options control whether Exim is built with support for -# PAM, RFC 2195 and RFC 2595 authentication mechanisms for SMTP AUTH. -# -WITH_PAM?= yes -WITH_AUTH_CRAM_MD5?= yes -WITH_AUTH_PLAINTEXT?= yes - # If WITH_LDAP is defined, LDAP_LIB_TYPE must be one of UMICHIGAN, # NETSCAPE or SOLARIS7. LDAP_LIB_TYPE=UMICHIGAN -# The following options control whether Exim is built with support for -# additional mailbox formats. -WITH_MAILDIR?= yes -WITH_MAILSTORE?= yes -WITH_MBX?= yes +# The following options may be defined to turn off support for various +# features that this port enables by default. +# +# Do not link against OpenSSL; disables STARTTLS. +#WITHOUT_TLS= yes +# +# Disable the embedded Perl interpreter, which allows Perl subroutines to +# be called during string expansion. +#WITHOUT_PERL= yes +# +# Disable built-in Exim support for the PAM, RFC 2195 and RFC 2595 +# authentication mechanisms, used for SMTP AUTH. +#WITHOUT_PAM= yes +#WITHOUT_AUTH_CRAM_MD5= yes +#WITHOUT_AUTH_PLAINTEXT= yes +# +# Disable built-in Exim support for additional mailbox formats. +#WITHOUT_MAILDIR= yes +#WITHOUT_MAILSTORE= yes +#WITHOUT_MBX= yes # You should not need to fiddle with anything below this point. @@ -68,18 +69,18 @@ SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},' \ SEDLIST+= -e 's,^EXIM_MONITOR,\#EXIM_MONITOR,' .endif -.if defined(WITH_TLS) && ${WITH_TLS} == "yes" +.if !defined(WITHOUT_TLS) SEDLIST+= -e 's,XX_TLS_LIBS_XX,-lssl -lcrypto,' \ -e 's,^\# SUPPORT_TLS=,SUPPORT_TLS=,' .else SEDLIST+= -e 's,^TLS_LIBS,\#TLS_LIBS,' .endif -.if defined(WITH_PERL) && ${WITH_PERL} == "yes" +.if !defined(WITHOUT_PERL) SEDLIST+= -e 's,^\# EXIM_PERL=,EXIM_PERL=,' .endif -.if defined(WITH_TCP_WRAPPERS) && ${WITH_TCP_WRAPPERS} == "yes" +.if defined(WITH_TCP_WRAPPERS) SEDLIST+= -e 's,XX_TCP_WRAPPERS_LIBS_XX,-lwrap,' \ -e 's,^\# USE_TCP_WRAPPERS=,USE_TCP_WRAPPERS=,' .endif @@ -104,18 +105,18 @@ SEDLIST+= -e 's,XX_MYSQL_LIBS_XX,-L${PREFIX}/lib/mysql -lmysqlclient,' \ SEDLIST+= -e 's,XX_MYSQL_[^ ]*_XX,,' .endif -.if defined(WITH_PAM) && ${WITH_PAM} == "yes" +.if !defined(WITHOUT_PAM) SEDLIST+= -e 's,XX_PAM_LIBS_XX,-lpam,' \ -e 's,^\# SUPPORT_PAM=,SUPPORT_PAM=,' .else SEDLIST+= -e 's,XX_PAM_LIBS_XX,,' .endif -.if defined(WITH_AUTH_CRAM_MD5) && ${WITH_AUTH_CRAM_MD5} == "yes" +.if !defined(WITHOUT_AUTH_CRAM_MD5) SEDLIST+= -e 's,^\# AUTH_CRAM_MD5=,AUTH_CRAM_MD5=,' .endif -.if defined(WITH_AUTH_PLAINTEXT) && ${WITH_AUTH_PLAINTEXT} == "yes" +.if !defined(WITHOUT_AUTH_PLAINTEXT) SEDLIST+= -e 's,^\# AUTH_PLAINTEXT=,AUTH_PLAINTEXT=,' .endif @@ -133,15 +134,15 @@ SEDLIST+= -e 's,^LOOKUP_LIBS,\#LOOKUP_LIBS,' \ -e 's,^LOOKUP_INCLUDE,\#LOOKUP_INCLUDE,' .endif -.if defined(WITH_MAILDIR) && ${WITH_MAILDIR} == "yes" +.if !defined(WITHOUT_MAILDIR) SEDLIST+= -e 's,^\# SUPPORT_MAILDIR=,SUPPORT_MAILDIR=,' .endif -.if defined(WITH_MAILSTORE) && ${WITH_MAILSTORE} == "yes" +.if !defined(WITH_MAILSTORE) SEDLIST+= -e 's,^\# SUPPORT_MAILSTORE=,SUPPORT_MAILSTORE=,' .endif -.if defined(WITH_MAILMBX) && ${WITH_MAILMBX} == "yes" +.if !defined(WITH_MAILMBX) SEDLIST+= -e 's,^\# SUPPORT_MBX=,SUPPORT_MBX=,' .endif |