diff options
27 files changed, 1248 insertions, 195 deletions
diff --git a/net/samba-devel/Makefile b/net/samba-devel/Makefile index c914a2098d61..774a208e5855 100644 --- a/net/samba-devel/Makefile +++ b/net/samba-devel/Makefile @@ -1,60 +1,80 @@ # New ports collection makefile for: samba -# Version required: 1.9.17p4 +# Version required: 1.9.18 # Date created: 11th Feb 1995 # Whom: gpalmer # -# $Id: Makefile,v 1.16 1997/10/23 14:38:55 max Exp $ +# $Id: Makefile,v 1.17 1997/10/23 15:03:20 max Exp $ # -DISTNAME= samba-1.9.17p4 -PKGNAME= samba-1.9.17.4 +DISTNAME= samba-1.9.18 +PKGNAME= samba-1.9.18.0 CATEGORIES= net MASTER_SITES= ftp://samba.anu.edu.au/pub/samba/ MAINTAINER= hosokawa@jp.FreeBSD.ORG WRKSRC= ${WRKDIR}/${DISTNAME}/source -MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 +MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 make_smbcodepage.1 MAN5= smb.conf.5 MAN7= samba.7 MAN8= smbd.8 nmbd.8 smbpasswd.8 STARTUP_SCRIPT= ${PREFIX}/etc/rc.d/samba.sh.sample -SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.sample +SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.default SAMBA_SPOOL= /var/spool/samba XSAMBA_SPOOL= \/var\/spool\/samba SAMBA_LOGDIR= /var/log XSAMBA_LOGDIR= \/var\/log +SAMBA_PRIVATE= ${PREFIX}/private + +SAMBA_DOCS=${WRKDIR}/${DISTNAME}/docs/INSTALL.sambatar \ + ${WRKDIR}/${DISTNAME}/docs/THANKS \ + ${WRKDIR}/${DISTNAME}/docs/history \ + ${WRKDIR}/${DISTNAME}/docs/announce \ + ${WRKDIR}/${DISTNAME}/docs/PROJECTS \ post-install: + ${MKDIR} ${PREFIX}/share/examples/samba + ${CP} -rp ${WRKDIR}/${DISTNAME}/examples/* ${PREFIX}/share/examples/samba .if !defined(NOPORTDOCS) ${MKDIR} ${PREFIX}/share/doc/samba/faq - for i in ${WRKDIR}/${DISTNAME}/docs/*.txt ${WRKDIR}/${DISTNAME}/docs/README* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ + ${INSTALL_DATA} ${FILESDIR}/README.FreeBSD ${PREFIX}/share/doc/samba + for i in ${SAMBA_DOCS} ${WRKDIR}/${DISTNAME}/docs/*.txt \ + ${WRKDIR}/${DISTNAME}/docs/*.reg \ + ${WRKDIR}/${DISTNAME}/docs/*.htm \ + ${WRKDIR}/${DISTNAME}/*.txt \ + ${WRKDIR}/${DISTNAME}/README \ + ${WRKDIR}/${DISTNAME}/docs/README.* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ done - for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ + for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ done .endif @if [ ! -f ${STARTUP_SCRIPT} ]; then \ ${ECHO} "Installing ${STARTUP_SCRIPT} startup file." ; \ - ${ECHO} '#!/bin/sh' > ${STARTUP_SCRIPT} ; \ - ${ECHO} 'smbd=${PREFIX}/sbin/smbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'nmbd=${PREFIX}/sbin/nmbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'if [ -f $$smbd ]; then' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} " ${ECHO} -n ' Samba'" >> ${STARTUP_SCRIPT} ;\ - ${ECHO} ' $$smbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} ' $$nmbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} "fi" >> ${STARTUP_SCRIPT} ; \ - chmod 755 ${STARTUP_SCRIPT} ; \ - chown bin.bin ${STARTUP_SCRIPT}; \ + ${INSTALL_SCRIPT} ${FILESDIR}/samba.sh.sample \ + ${STARTUP_SCRIPT} ; \ fi @test -d ${SAMBA_SPOOL} || ${MKDIR} ${SAMBA_SPOOL} && chmod 1777 ${SAMBA_SPOOL} @if [ ! -f ${SAMPLE_CONFIG} ]; then \ ${SED} -e 's/__SAMBA_SPOOL__/${XSAMBA_SPOOL}/' \ -e 's/__LOGDIR__/${XSAMBA_LOGDIR}/' \ - ${FILESDIR}/smb.conf.sample \ + ${FILESDIR}/smb.conf.default \ > ${SAMPLE_CONFIG} ; \ fi + ${INSTALL_SCRIPT} ${WRKDIR}/${DISTNAME}/source/mksmbpasswd.sh ${PREFIX}/bin + if [ ! -d ${SAMBA_PRIVATE} ] ; then \ + ${MKDIR} ${SAMBA_PRIVATE} ; \ + chown root.wheel ${SAMBA_PRIVATE} ; \ + fi + chmod 700 ${SAMBA_PRIVATE} + if [ ! -f ${SAMBA_PRIVATE}/smbpasswd ] ; then \ + ${CAT} /etc/passwd | ${PREFIX}/bin/mksmbpasswd.sh > ${SAMBA_PRIVATE}/smbpasswd ; \ + chmod 600 ${SAMBA_PRIVATE}/smbpasswd ; \ + fi + chmod 500 ${SAMBA_PRIVATE} + chown root.wheel ${PREFIX}/bin/smbpasswd + chmod 4111 ${PREFIX}/bin/smbpasswd .include <bsd.port.mk> diff --git a/net/samba-devel/distinfo b/net/samba-devel/distinfo index 7029bc83d152..3d176fe5bc71 100644 --- a/net/samba-devel/distinfo +++ b/net/samba-devel/distinfo @@ -1 +1 @@ -MD5 (samba-1.9.17p4.tar.gz) = dd8a65242a2bb969a9a5f3d7095df602 +MD5 (samba-1.9.18.tar.gz) = f1ff86c9b41cac82992964168656514f diff --git a/net/samba-devel/files/README.FreeBSD b/net/samba-devel/files/README.FreeBSD new file mode 100644 index 000000000000..d04f5ee89bf0 --- /dev/null +++ b/net/samba-devel/files/README.FreeBSD @@ -0,0 +1,19 @@ +If you want to use samba ports, + +1. Copy /usr/local/etc/smb.conf.default to /usr/local/etc/smb.conf, and edit + it. +2. Copy /usr/local/etc/rc.d/samba.sh.sample to /usr/local/etc/rc.d/samba.sh +3. Type /usr/local/etc/rc.d/samba.sh or reboot. + +See document files in /usr/local/share/doc/samba and example config files in +/usr/local/share/examples/samba for details. + +FreeBSD Samba ports for localization and encrypt passwords support are no +longer provided because these supports have been integrated into the original +distribution since 1.9.18. If you're Western European or Asian (Japanese, +Chinese, etc.) Windows users, please set "client code page" parameter in +smb.conf. See smb.conf.sample for details. If you want to use NT4+SP3 or +Win95+updates clients, set "encrypt passwords" parameter to yes and use +smbpasswd [username] to use /usr/local/private/smbpasswd for authentication. + +FreeBSD SAMBA ports maintainer: Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org> diff --git a/net/samba-devel/files/patch-aa b/net/samba-devel/files/patch-aa index 6c07f0980471..c99001099c0a 100644 --- a/net/samba-devel/files/patch-aa +++ b/net/samba-devel/files/patch-aa @@ -1,5 +1,5 @@ ---- Makefile.orig Sat Sep 27 00:04:52 1997 -+++ Makefile Wed Oct 15 17:09:58 1997 +--- Makefile.orig Thu Jan 8 03:29:04 1998 ++++ Makefile Thu Jan 8 14:52:32 1998 @@ -5,11 +5,11 @@ ########################################################################### @@ -22,31 +22,21 @@ -LIBDIR = $(BASEDIR)/lib -VARDIR = $(BASEDIR)/var +SBINDIR = $(BASEDIR)/sbin -+ETCDIR = $(BASEDIR)/etc -+LOGDIR = /var/log ++LIBDIR = $(BASEDIR)/etc ++VARDIR = /var/log # The permissions to give the executables INSTALLPERMS = 0755 -@@ -45,13 +45,13 @@ - # set these to where to find various files - # These can be overridden by command line switches (see smbd(8)) - # or in smb.conf (see smb.conf(5)) --SMBLOGFILE = $(VARDIR)/log.smb --NMBLOGFILE = $(VARDIR)/log.nmb --CONFIGFILE = $(LIBDIR)/smb.conf --LMHOSTSFILE = $(LIBDIR)/lmhosts -+SMBLOGFILE = $(LOGDIR)/smb -+NMBLOGFILE = $(LOGDIR)/nmb -+CONFIGFILE = $(ETCDIR)/smb.conf -+LMHOSTSFILE = $(ETCDIR)/lmhosts +@@ -55,7 +55,7 @@ + WEB_ROOT = $(BASEDIR) # the directory where lock files go -LOCKDIR = $(VARDIR)/locks +LOCKDIR = /var/spool/lock - # set this to the default group you want your machine to appear in - # for browsing. This can also be set in nmbd (see nmbd(8)) -@@ -383,8 +383,8 @@ + # The directory where code page definition files go + CODEPAGEDIR = $(LIBDIR)/codepages +@@ -396,8 +396,8 @@ # This is for FreeBSD # contributed by kuku@acds.physik.rwth-aachen.de # NOTE: You may need to add -DBSD44 if you have password problems @@ -55,16 +45,5 @@ +FLAGSM = -DFreeBSD -DFAST_SHARE_MODES +LIBSM = -lcrypt - - # This is for NEXTSTEP Release 2.X -@@ -684,8 +684,8 @@ - install: installbin installman installscripts - - installbin: all -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS) -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(ETCDIR) $(LOGDIR) $(SPROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(ETCDIR) $(LOGDIR) $(PROGS) - - installscripts: - @$(SHELL) $(srcdir)installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS) + # This is for OpenBSD + # contributed by todd@openbsd.org diff --git a/net/samba-devel/files/samba.sh.sample b/net/samba-devel/files/samba.sh.sample new file mode 100644 index 000000000000..50b8968ec6c5 --- /dev/null +++ b/net/samba-devel/files/samba.sh.sample @@ -0,0 +1,13 @@ +#!/bin/sh +smbspool=/var/spool/samba +smbd=/usr/local/sbin/smbd +nmbd=/usr/local/sbin/nmbd + +if [ -f $smbd ]; then + if [ -d $smbspool ]; then + rm -f $smbspool/* + fi + echo -n ' Samba' + $smbd -D + $nmbd -D +fi diff --git a/net/samba-devel/files/smb.conf.default b/net/samba-devel/files/smb.conf.default new file mode 100644 index 000000000000..051bc7cc023a --- /dev/null +++ b/net/samba-devel/files/smb.conf.default @@ -0,0 +1,257 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not many any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 + workgroup = MYGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this + load printers = yes + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +# on SystemV system setting printcap name to lpstat should allow +# you to automatically obtain a printer list from the SystemV spool +# system +; printcap name = lpstat + +# It should not be necessary to specify the print system type unless +# it is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx +; printing = bsd + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = __LOGDIR__/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /usr/local/samba/lib/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Use only if you have an NT server on your network that has been +# configured at install time to be a primary domain controller. +; domain controller = <NT-Domain-Controller-SMBName> + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Client codepage setting +# for Western European users +; client code page=850 +# for Asian Users (Japanese, Chinese, etc.) +; client code page=932 +; coding system=cap + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /usr/local/samba/lib/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /usr/local/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = __SAMBA_SPOOL__ + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba +; public = yes +; writable = yes +; printable = no +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %U option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/net/samba-devel/pkg-comment b/net/samba-devel/pkg-comment index 47492e3e2e47..21f25f97e695 100644 --- a/net/samba-devel/pkg-comment +++ b/net/samba-devel/pkg-comment @@ -1 +1 @@ -A LanManager(R)-compatible server suite for Unix +A free SMB and CIFS client and server for UNIX diff --git a/net/samba-devel/pkg-descr b/net/samba-devel/pkg-descr index f6ca2487e419..df127661ed82 100644 --- a/net/samba-devel/pkg-descr +++ b/net/samba-devel/pkg-descr @@ -8,9 +8,3 @@ or FreeBSD printers as if they were local printers. Some of the most popular Lan Manager compatible clients include Lan Manager itself, Windows for Workgroups, OS/2 and Windows NT. - -Please note that if you want to use Windows NT 4.0 + Service Pack 3 -or above as clients, you have to use -des version of samba ports. --des version is not redistributable as a binary package because of -the export control of US. Please type make install at net/samba-des -in ports collection. diff --git a/net/samba-devel/pkg-plist b/net/samba-devel/pkg-plist index 077dda64967a..2c64fb8f4739 100644 --- a/net/samba-devel/pkg-plist +++ b/net/samba-devel/pkg-plist @@ -7,6 +7,9 @@ bin/smbtar bin/addtosmbpass bin/testparm bin/testprns +bin/mksmbpasswd.sh +bin/make_smbcodepage +bin/make_printerdef sbin/smbd sbin/nmbd man/man1/smbstatus.1.gz @@ -15,6 +18,7 @@ man/man1/smbrun.1.gz man/man1/smbtar.1.gz man/man1/testparm.1.gz man/man1/testprns.1.gz +man/man1/make_smbcodepage.1.gz man/man5/smb.conf.5.gz man/man7/samba.7.gz man/man8/smbd.8.gz @@ -44,6 +48,7 @@ share/doc/samba/faq/sambafaq.txt share/doc/samba/Application_Serving.txt share/doc/samba/BROWSING.txt share/doc/samba/BUGS.txt +share/doc/samba/CVS_ACCESS.txt share/doc/samba/DIAGNOSIS.txt share/doc/samba/DNIX.txt share/doc/samba/DOMAIN.txt @@ -52,24 +57,88 @@ share/doc/samba/ENCRYPTION.txt share/doc/samba/Faxing.txt share/doc/samba/GOTCHAS.txt share/doc/samba/HINTS.txt +share/doc/samba/INSTALL.sambatar share/doc/samba/MIRRORS.txt +share/doc/samba/NT4_PlainPassword.reg +share/doc/samba/NTDOMAIN.txt share/doc/samba/NetBIOS.txt share/doc/samba/OS2-Client-HOWTO.txt +share/doc/samba/README +share/doc/samba/README.DCEDFS +share/doc/samba/README.FreeBSD +share/doc/samba/README.jis +share/doc/samba/README.sambatar +share/doc/samba/PRINTER_DRIVER.txt share/doc/samba/Passwords.txt share/doc/samba/Printing.txt +share/doc/samba/PROJECTS share/doc/samba/SCO.txt share/doc/samba/Speed.txt share/doc/samba/Support.txt share/doc/samba/Tracing.txt +share/doc/samba/THANKS share/doc/samba/UNIX-SMB.txt share/doc/samba/Win95.txt +share/doc/samba/Win95_PlainPassword.reg share/doc/samba/UNIX_INSTALL.txt +share/doc/samba/WHATSNEW.txt share/doc/samba/WinNT.txt +share/doc/samba/announce +share/doc/samba/cifsntdomain.txt +share/doc/samba/history share/doc/samba/security_level.txt -share/doc/samba/README.DCEDFS -share/doc/samba/README.jis -share/doc/samba/README.sambatar +share/doc/samba/wfw_slip.htm +share/examples/samba/dce-dfs/README +share/examples/samba/dce-dfs/smb.conf +share/examples/samba/tridge/smb.conf.WinNT +share/examples/samba/tridge/smb.conf.vittjokk +share/examples/samba/tridge/smb.conf.fjall +share/examples/samba/tridge/README +share/examples/samba/tridge/smb.conf.lapland +share/examples/samba/tridge/smb.conf +share/examples/samba/thoralf/smb.conf +share/examples/samba/svr4-startup/README +share/examples/samba/svr4-startup/samba.server +share/examples/samba/misc/extra_smbstatus +share/examples/samba/misc/wall.perl +share/examples/samba/validchars/validchr.com +share/examples/samba/validchars/readme +share/examples/samba/validchars/validchr.c +share/examples/samba/validchars/msdos70.out +share/examples/samba/validchars/nwdos70.out +share/examples/samba/printing/smbprint +share/examples/samba/printing/smbprint.sysv +share/examples/samba/printer-accounting/hp5-redir +share/examples/samba/printer-accounting/acct-all +share/examples/samba/printer-accounting/acct-sum +share/examples/samba/printer-accounting/README +share/examples/samba/printer-accounting/lp-acct +share/examples/samba/printer-accounting/printcap +share/examples/samba/simple/README +share/examples/samba/simple/smb.conf +share/examples/samba/smb.conf.default +share/examples/samba/README etc/rc.d/samba.sh.sample -etc/smb.conf.sample +etc/smb.conf.default +etc/codepages/codepage.437 +etc/codepages/codepage.850 +etc/codepages/codepage.852 +etc/codepages/codepage.932 +@exec mkdir %D/private ; if [ ! -f %D/private/smbpasswd ] ; then chown -R root.wheel %D/private ; cat /etc/passwd | %D/bin/mksmbpasswd.sh > %D/private/smbpasswd ; chmod 500 %D/private ; chmod 600 %D/private/smbpasswd ; fi +@exec mkdir -p /var/spool/samba ; chmod 1777 /var/spool/samba +@exec cat %D/share/doc/samba/README.FreeBSD +@unexec echo "Warning: If you will *NOT* use this package anymore, please remove %D/private/smbpasswd manually." +@unexec rm -rf /var/spool/samba @dirrm share/doc/samba/faq @dirrm share/doc/samba +@dirrm share/examples/samba/dce-dfs +@dirrm share/examples/samba/tridge +@dirrm share/examples/samba/thoralf +@dirrm share/examples/samba/svr4-startup +@dirrm share/examples/samba/misc +@dirrm share/examples/samba/validchars +@dirrm share/examples/samba/printing +@dirrm share/examples/samba/printer-accounting +@dirrm share/examples/samba/simple +@dirrm share/examples/samba +@dirrm etc/codepages diff --git a/net/samba/Makefile b/net/samba/Makefile index c914a2098d61..774a208e5855 100644 --- a/net/samba/Makefile +++ b/net/samba/Makefile @@ -1,60 +1,80 @@ # New ports collection makefile for: samba -# Version required: 1.9.17p4 +# Version required: 1.9.18 # Date created: 11th Feb 1995 # Whom: gpalmer # -# $Id: Makefile,v 1.16 1997/10/23 14:38:55 max Exp $ +# $Id: Makefile,v 1.17 1997/10/23 15:03:20 max Exp $ # -DISTNAME= samba-1.9.17p4 -PKGNAME= samba-1.9.17.4 +DISTNAME= samba-1.9.18 +PKGNAME= samba-1.9.18.0 CATEGORIES= net MASTER_SITES= ftp://samba.anu.edu.au/pub/samba/ MAINTAINER= hosokawa@jp.FreeBSD.ORG WRKSRC= ${WRKDIR}/${DISTNAME}/source -MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 +MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 make_smbcodepage.1 MAN5= smb.conf.5 MAN7= samba.7 MAN8= smbd.8 nmbd.8 smbpasswd.8 STARTUP_SCRIPT= ${PREFIX}/etc/rc.d/samba.sh.sample -SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.sample +SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.default SAMBA_SPOOL= /var/spool/samba XSAMBA_SPOOL= \/var\/spool\/samba SAMBA_LOGDIR= /var/log XSAMBA_LOGDIR= \/var\/log +SAMBA_PRIVATE= ${PREFIX}/private + +SAMBA_DOCS=${WRKDIR}/${DISTNAME}/docs/INSTALL.sambatar \ + ${WRKDIR}/${DISTNAME}/docs/THANKS \ + ${WRKDIR}/${DISTNAME}/docs/history \ + ${WRKDIR}/${DISTNAME}/docs/announce \ + ${WRKDIR}/${DISTNAME}/docs/PROJECTS \ post-install: + ${MKDIR} ${PREFIX}/share/examples/samba + ${CP} -rp ${WRKDIR}/${DISTNAME}/examples/* ${PREFIX}/share/examples/samba .if !defined(NOPORTDOCS) ${MKDIR} ${PREFIX}/share/doc/samba/faq - for i in ${WRKDIR}/${DISTNAME}/docs/*.txt ${WRKDIR}/${DISTNAME}/docs/README* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ + ${INSTALL_DATA} ${FILESDIR}/README.FreeBSD ${PREFIX}/share/doc/samba + for i in ${SAMBA_DOCS} ${WRKDIR}/${DISTNAME}/docs/*.txt \ + ${WRKDIR}/${DISTNAME}/docs/*.reg \ + ${WRKDIR}/${DISTNAME}/docs/*.htm \ + ${WRKDIR}/${DISTNAME}/*.txt \ + ${WRKDIR}/${DISTNAME}/README \ + ${WRKDIR}/${DISTNAME}/docs/README.* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ done - for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ + for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ done .endif @if [ ! -f ${STARTUP_SCRIPT} ]; then \ ${ECHO} "Installing ${STARTUP_SCRIPT} startup file." ; \ - ${ECHO} '#!/bin/sh' > ${STARTUP_SCRIPT} ; \ - ${ECHO} 'smbd=${PREFIX}/sbin/smbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'nmbd=${PREFIX}/sbin/nmbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'if [ -f $$smbd ]; then' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} " ${ECHO} -n ' Samba'" >> ${STARTUP_SCRIPT} ;\ - ${ECHO} ' $$smbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} ' $$nmbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} "fi" >> ${STARTUP_SCRIPT} ; \ - chmod 755 ${STARTUP_SCRIPT} ; \ - chown bin.bin ${STARTUP_SCRIPT}; \ + ${INSTALL_SCRIPT} ${FILESDIR}/samba.sh.sample \ + ${STARTUP_SCRIPT} ; \ fi @test -d ${SAMBA_SPOOL} || ${MKDIR} ${SAMBA_SPOOL} && chmod 1777 ${SAMBA_SPOOL} @if [ ! -f ${SAMPLE_CONFIG} ]; then \ ${SED} -e 's/__SAMBA_SPOOL__/${XSAMBA_SPOOL}/' \ -e 's/__LOGDIR__/${XSAMBA_LOGDIR}/' \ - ${FILESDIR}/smb.conf.sample \ + ${FILESDIR}/smb.conf.default \ > ${SAMPLE_CONFIG} ; \ fi + ${INSTALL_SCRIPT} ${WRKDIR}/${DISTNAME}/source/mksmbpasswd.sh ${PREFIX}/bin + if [ ! -d ${SAMBA_PRIVATE} ] ; then \ + ${MKDIR} ${SAMBA_PRIVATE} ; \ + chown root.wheel ${SAMBA_PRIVATE} ; \ + fi + chmod 700 ${SAMBA_PRIVATE} + if [ ! -f ${SAMBA_PRIVATE}/smbpasswd ] ; then \ + ${CAT} /etc/passwd | ${PREFIX}/bin/mksmbpasswd.sh > ${SAMBA_PRIVATE}/smbpasswd ; \ + chmod 600 ${SAMBA_PRIVATE}/smbpasswd ; \ + fi + chmod 500 ${SAMBA_PRIVATE} + chown root.wheel ${PREFIX}/bin/smbpasswd + chmod 4111 ${PREFIX}/bin/smbpasswd .include <bsd.port.mk> diff --git a/net/samba/distinfo b/net/samba/distinfo index 7029bc83d152..3d176fe5bc71 100644 --- a/net/samba/distinfo +++ b/net/samba/distinfo @@ -1 +1 @@ -MD5 (samba-1.9.17p4.tar.gz) = dd8a65242a2bb969a9a5f3d7095df602 +MD5 (samba-1.9.18.tar.gz) = f1ff86c9b41cac82992964168656514f diff --git a/net/samba/files/README.FreeBSD b/net/samba/files/README.FreeBSD new file mode 100644 index 000000000000..d04f5ee89bf0 --- /dev/null +++ b/net/samba/files/README.FreeBSD @@ -0,0 +1,19 @@ +If you want to use samba ports, + +1. Copy /usr/local/etc/smb.conf.default to /usr/local/etc/smb.conf, and edit + it. +2. Copy /usr/local/etc/rc.d/samba.sh.sample to /usr/local/etc/rc.d/samba.sh +3. Type /usr/local/etc/rc.d/samba.sh or reboot. + +See document files in /usr/local/share/doc/samba and example config files in +/usr/local/share/examples/samba for details. + +FreeBSD Samba ports for localization and encrypt passwords support are no +longer provided because these supports have been integrated into the original +distribution since 1.9.18. If you're Western European or Asian (Japanese, +Chinese, etc.) Windows users, please set "client code page" parameter in +smb.conf. See smb.conf.sample for details. If you want to use NT4+SP3 or +Win95+updates clients, set "encrypt passwords" parameter to yes and use +smbpasswd [username] to use /usr/local/private/smbpasswd for authentication. + +FreeBSD SAMBA ports maintainer: Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org> diff --git a/net/samba/files/patch-aa b/net/samba/files/patch-aa index 6c07f0980471..c99001099c0a 100644 --- a/net/samba/files/patch-aa +++ b/net/samba/files/patch-aa @@ -1,5 +1,5 @@ ---- Makefile.orig Sat Sep 27 00:04:52 1997 -+++ Makefile Wed Oct 15 17:09:58 1997 +--- Makefile.orig Thu Jan 8 03:29:04 1998 ++++ Makefile Thu Jan 8 14:52:32 1998 @@ -5,11 +5,11 @@ ########################################################################### @@ -22,31 +22,21 @@ -LIBDIR = $(BASEDIR)/lib -VARDIR = $(BASEDIR)/var +SBINDIR = $(BASEDIR)/sbin -+ETCDIR = $(BASEDIR)/etc -+LOGDIR = /var/log ++LIBDIR = $(BASEDIR)/etc ++VARDIR = /var/log # The permissions to give the executables INSTALLPERMS = 0755 -@@ -45,13 +45,13 @@ - # set these to where to find various files - # These can be overridden by command line switches (see smbd(8)) - # or in smb.conf (see smb.conf(5)) --SMBLOGFILE = $(VARDIR)/log.smb --NMBLOGFILE = $(VARDIR)/log.nmb --CONFIGFILE = $(LIBDIR)/smb.conf --LMHOSTSFILE = $(LIBDIR)/lmhosts -+SMBLOGFILE = $(LOGDIR)/smb -+NMBLOGFILE = $(LOGDIR)/nmb -+CONFIGFILE = $(ETCDIR)/smb.conf -+LMHOSTSFILE = $(ETCDIR)/lmhosts +@@ -55,7 +55,7 @@ + WEB_ROOT = $(BASEDIR) # the directory where lock files go -LOCKDIR = $(VARDIR)/locks +LOCKDIR = /var/spool/lock - # set this to the default group you want your machine to appear in - # for browsing. This can also be set in nmbd (see nmbd(8)) -@@ -383,8 +383,8 @@ + # The directory where code page definition files go + CODEPAGEDIR = $(LIBDIR)/codepages +@@ -396,8 +396,8 @@ # This is for FreeBSD # contributed by kuku@acds.physik.rwth-aachen.de # NOTE: You may need to add -DBSD44 if you have password problems @@ -55,16 +45,5 @@ +FLAGSM = -DFreeBSD -DFAST_SHARE_MODES +LIBSM = -lcrypt - - # This is for NEXTSTEP Release 2.X -@@ -684,8 +684,8 @@ - install: installbin installman installscripts - - installbin: all -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS) -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(ETCDIR) $(LOGDIR) $(SPROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(ETCDIR) $(LOGDIR) $(PROGS) - - installscripts: - @$(SHELL) $(srcdir)installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS) + # This is for OpenBSD + # contributed by todd@openbsd.org diff --git a/net/samba/files/samba.sh.sample b/net/samba/files/samba.sh.sample new file mode 100644 index 000000000000..50b8968ec6c5 --- /dev/null +++ b/net/samba/files/samba.sh.sample @@ -0,0 +1,13 @@ +#!/bin/sh +smbspool=/var/spool/samba +smbd=/usr/local/sbin/smbd +nmbd=/usr/local/sbin/nmbd + +if [ -f $smbd ]; then + if [ -d $smbspool ]; then + rm -f $smbspool/* + fi + echo -n ' Samba' + $smbd -D + $nmbd -D +fi diff --git a/net/samba/files/smb.conf.default b/net/samba/files/smb.conf.default new file mode 100644 index 000000000000..051bc7cc023a --- /dev/null +++ b/net/samba/files/smb.conf.default @@ -0,0 +1,257 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not many any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 + workgroup = MYGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this + load printers = yes + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +# on SystemV system setting printcap name to lpstat should allow +# you to automatically obtain a printer list from the SystemV spool +# system +; printcap name = lpstat + +# It should not be necessary to specify the print system type unless +# it is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx +; printing = bsd + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = __LOGDIR__/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /usr/local/samba/lib/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Use only if you have an NT server on your network that has been +# configured at install time to be a primary domain controller. +; domain controller = <NT-Domain-Controller-SMBName> + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Client codepage setting +# for Western European users +; client code page=850 +# for Asian Users (Japanese, Chinese, etc.) +; client code page=932 +; coding system=cap + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /usr/local/samba/lib/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /usr/local/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = __SAMBA_SPOOL__ + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba +; public = yes +; writable = yes +; printable = no +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %U option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/net/samba/pkg-comment b/net/samba/pkg-comment index 47492e3e2e47..21f25f97e695 100644 --- a/net/samba/pkg-comment +++ b/net/samba/pkg-comment @@ -1 +1 @@ -A LanManager(R)-compatible server suite for Unix +A free SMB and CIFS client and server for UNIX diff --git a/net/samba/pkg-descr b/net/samba/pkg-descr index f6ca2487e419..df127661ed82 100644 --- a/net/samba/pkg-descr +++ b/net/samba/pkg-descr @@ -8,9 +8,3 @@ or FreeBSD printers as if they were local printers. Some of the most popular Lan Manager compatible clients include Lan Manager itself, Windows for Workgroups, OS/2 and Windows NT. - -Please note that if you want to use Windows NT 4.0 + Service Pack 3 -or above as clients, you have to use -des version of samba ports. --des version is not redistributable as a binary package because of -the export control of US. Please type make install at net/samba-des -in ports collection. diff --git a/net/samba/pkg-plist b/net/samba/pkg-plist index 077dda64967a..2c64fb8f4739 100644 --- a/net/samba/pkg-plist +++ b/net/samba/pkg-plist @@ -7,6 +7,9 @@ bin/smbtar bin/addtosmbpass bin/testparm bin/testprns +bin/mksmbpasswd.sh +bin/make_smbcodepage +bin/make_printerdef sbin/smbd sbin/nmbd man/man1/smbstatus.1.gz @@ -15,6 +18,7 @@ man/man1/smbrun.1.gz man/man1/smbtar.1.gz man/man1/testparm.1.gz man/man1/testprns.1.gz +man/man1/make_smbcodepage.1.gz man/man5/smb.conf.5.gz man/man7/samba.7.gz man/man8/smbd.8.gz @@ -44,6 +48,7 @@ share/doc/samba/faq/sambafaq.txt share/doc/samba/Application_Serving.txt share/doc/samba/BROWSING.txt share/doc/samba/BUGS.txt +share/doc/samba/CVS_ACCESS.txt share/doc/samba/DIAGNOSIS.txt share/doc/samba/DNIX.txt share/doc/samba/DOMAIN.txt @@ -52,24 +57,88 @@ share/doc/samba/ENCRYPTION.txt share/doc/samba/Faxing.txt share/doc/samba/GOTCHAS.txt share/doc/samba/HINTS.txt +share/doc/samba/INSTALL.sambatar share/doc/samba/MIRRORS.txt +share/doc/samba/NT4_PlainPassword.reg +share/doc/samba/NTDOMAIN.txt share/doc/samba/NetBIOS.txt share/doc/samba/OS2-Client-HOWTO.txt +share/doc/samba/README +share/doc/samba/README.DCEDFS +share/doc/samba/README.FreeBSD +share/doc/samba/README.jis +share/doc/samba/README.sambatar +share/doc/samba/PRINTER_DRIVER.txt share/doc/samba/Passwords.txt share/doc/samba/Printing.txt +share/doc/samba/PROJECTS share/doc/samba/SCO.txt share/doc/samba/Speed.txt share/doc/samba/Support.txt share/doc/samba/Tracing.txt +share/doc/samba/THANKS share/doc/samba/UNIX-SMB.txt share/doc/samba/Win95.txt +share/doc/samba/Win95_PlainPassword.reg share/doc/samba/UNIX_INSTALL.txt +share/doc/samba/WHATSNEW.txt share/doc/samba/WinNT.txt +share/doc/samba/announce +share/doc/samba/cifsntdomain.txt +share/doc/samba/history share/doc/samba/security_level.txt -share/doc/samba/README.DCEDFS -share/doc/samba/README.jis -share/doc/samba/README.sambatar +share/doc/samba/wfw_slip.htm +share/examples/samba/dce-dfs/README +share/examples/samba/dce-dfs/smb.conf +share/examples/samba/tridge/smb.conf.WinNT +share/examples/samba/tridge/smb.conf.vittjokk +share/examples/samba/tridge/smb.conf.fjall +share/examples/samba/tridge/README +share/examples/samba/tridge/smb.conf.lapland +share/examples/samba/tridge/smb.conf +share/examples/samba/thoralf/smb.conf +share/examples/samba/svr4-startup/README +share/examples/samba/svr4-startup/samba.server +share/examples/samba/misc/extra_smbstatus +share/examples/samba/misc/wall.perl +share/examples/samba/validchars/validchr.com +share/examples/samba/validchars/readme +share/examples/samba/validchars/validchr.c +share/examples/samba/validchars/msdos70.out +share/examples/samba/validchars/nwdos70.out +share/examples/samba/printing/smbprint +share/examples/samba/printing/smbprint.sysv +share/examples/samba/printer-accounting/hp5-redir +share/examples/samba/printer-accounting/acct-all +share/examples/samba/printer-accounting/acct-sum +share/examples/samba/printer-accounting/README +share/examples/samba/printer-accounting/lp-acct +share/examples/samba/printer-accounting/printcap +share/examples/samba/simple/README +share/examples/samba/simple/smb.conf +share/examples/samba/smb.conf.default +share/examples/samba/README etc/rc.d/samba.sh.sample -etc/smb.conf.sample +etc/smb.conf.default +etc/codepages/codepage.437 +etc/codepages/codepage.850 +etc/codepages/codepage.852 +etc/codepages/codepage.932 +@exec mkdir %D/private ; if [ ! -f %D/private/smbpasswd ] ; then chown -R root.wheel %D/private ; cat /etc/passwd | %D/bin/mksmbpasswd.sh > %D/private/smbpasswd ; chmod 500 %D/private ; chmod 600 %D/private/smbpasswd ; fi +@exec mkdir -p /var/spool/samba ; chmod 1777 /var/spool/samba +@exec cat %D/share/doc/samba/README.FreeBSD +@unexec echo "Warning: If you will *NOT* use this package anymore, please remove %D/private/smbpasswd manually." +@unexec rm -rf /var/spool/samba @dirrm share/doc/samba/faq @dirrm share/doc/samba +@dirrm share/examples/samba/dce-dfs +@dirrm share/examples/samba/tridge +@dirrm share/examples/samba/thoralf +@dirrm share/examples/samba/svr4-startup +@dirrm share/examples/samba/misc +@dirrm share/examples/samba/validchars +@dirrm share/examples/samba/printing +@dirrm share/examples/samba/printer-accounting +@dirrm share/examples/samba/simple +@dirrm share/examples/samba +@dirrm etc/codepages diff --git a/net/samba3/Makefile b/net/samba3/Makefile index c914a2098d61..774a208e5855 100644 --- a/net/samba3/Makefile +++ b/net/samba3/Makefile @@ -1,60 +1,80 @@ # New ports collection makefile for: samba -# Version required: 1.9.17p4 +# Version required: 1.9.18 # Date created: 11th Feb 1995 # Whom: gpalmer # -# $Id: Makefile,v 1.16 1997/10/23 14:38:55 max Exp $ +# $Id: Makefile,v 1.17 1997/10/23 15:03:20 max Exp $ # -DISTNAME= samba-1.9.17p4 -PKGNAME= samba-1.9.17.4 +DISTNAME= samba-1.9.18 +PKGNAME= samba-1.9.18.0 CATEGORIES= net MASTER_SITES= ftp://samba.anu.edu.au/pub/samba/ MAINTAINER= hosokawa@jp.FreeBSD.ORG WRKSRC= ${WRKDIR}/${DISTNAME}/source -MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 +MAN1= smbstatus.1 smbclient.1 smbrun.1 smbtar.1 testparm.1 testprns.1 make_smbcodepage.1 MAN5= smb.conf.5 MAN7= samba.7 MAN8= smbd.8 nmbd.8 smbpasswd.8 STARTUP_SCRIPT= ${PREFIX}/etc/rc.d/samba.sh.sample -SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.sample +SAMPLE_CONFIG= ${PREFIX}/etc/smb.conf.default SAMBA_SPOOL= /var/spool/samba XSAMBA_SPOOL= \/var\/spool\/samba SAMBA_LOGDIR= /var/log XSAMBA_LOGDIR= \/var\/log +SAMBA_PRIVATE= ${PREFIX}/private + +SAMBA_DOCS=${WRKDIR}/${DISTNAME}/docs/INSTALL.sambatar \ + ${WRKDIR}/${DISTNAME}/docs/THANKS \ + ${WRKDIR}/${DISTNAME}/docs/history \ + ${WRKDIR}/${DISTNAME}/docs/announce \ + ${WRKDIR}/${DISTNAME}/docs/PROJECTS \ post-install: + ${MKDIR} ${PREFIX}/share/examples/samba + ${CP} -rp ${WRKDIR}/${DISTNAME}/examples/* ${PREFIX}/share/examples/samba .if !defined(NOPORTDOCS) ${MKDIR} ${PREFIX}/share/doc/samba/faq - for i in ${WRKDIR}/${DISTNAME}/docs/*.txt ${WRKDIR}/${DISTNAME}/docs/README* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ + ${INSTALL_DATA} ${FILESDIR}/README.FreeBSD ${PREFIX}/share/doc/samba + for i in ${SAMBA_DOCS} ${WRKDIR}/${DISTNAME}/docs/*.txt \ + ${WRKDIR}/${DISTNAME}/docs/*.reg \ + ${WRKDIR}/${DISTNAME}/docs/*.htm \ + ${WRKDIR}/${DISTNAME}/*.txt \ + ${WRKDIR}/${DISTNAME}/README \ + ${WRKDIR}/${DISTNAME}/docs/README.* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba ; \ done - for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ - ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ + for i in ${WRKDIR}/${DISTNAME}/docs/faq/* ; do \ + ${INSTALL_DATA} $$i ${PREFIX}/share/doc/samba/faq ; \ done .endif @if [ ! -f ${STARTUP_SCRIPT} ]; then \ ${ECHO} "Installing ${STARTUP_SCRIPT} startup file." ; \ - ${ECHO} '#!/bin/sh' > ${STARTUP_SCRIPT} ; \ - ${ECHO} 'smbd=${PREFIX}/sbin/smbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'nmbd=${PREFIX}/sbin/nmbd' >> ${STARTUP_SCRIPT} ;\ - ${ECHO} 'if [ -f $$smbd ]; then' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} " ${ECHO} -n ' Samba'" >> ${STARTUP_SCRIPT} ;\ - ${ECHO} ' $$smbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} ' $$nmbd -D' >> ${STARTUP_SCRIPT} ; \ - ${ECHO} "fi" >> ${STARTUP_SCRIPT} ; \ - chmod 755 ${STARTUP_SCRIPT} ; \ - chown bin.bin ${STARTUP_SCRIPT}; \ + ${INSTALL_SCRIPT} ${FILESDIR}/samba.sh.sample \ + ${STARTUP_SCRIPT} ; \ fi @test -d ${SAMBA_SPOOL} || ${MKDIR} ${SAMBA_SPOOL} && chmod 1777 ${SAMBA_SPOOL} @if [ ! -f ${SAMPLE_CONFIG} ]; then \ ${SED} -e 's/__SAMBA_SPOOL__/${XSAMBA_SPOOL}/' \ -e 's/__LOGDIR__/${XSAMBA_LOGDIR}/' \ - ${FILESDIR}/smb.conf.sample \ + ${FILESDIR}/smb.conf.default \ > ${SAMPLE_CONFIG} ; \ fi + ${INSTALL_SCRIPT} ${WRKDIR}/${DISTNAME}/source/mksmbpasswd.sh ${PREFIX}/bin + if [ ! -d ${SAMBA_PRIVATE} ] ; then \ + ${MKDIR} ${SAMBA_PRIVATE} ; \ + chown root.wheel ${SAMBA_PRIVATE} ; \ + fi + chmod 700 ${SAMBA_PRIVATE} + if [ ! -f ${SAMBA_PRIVATE}/smbpasswd ] ; then \ + ${CAT} /etc/passwd | ${PREFIX}/bin/mksmbpasswd.sh > ${SAMBA_PRIVATE}/smbpasswd ; \ + chmod 600 ${SAMBA_PRIVATE}/smbpasswd ; \ + fi + chmod 500 ${SAMBA_PRIVATE} + chown root.wheel ${PREFIX}/bin/smbpasswd + chmod 4111 ${PREFIX}/bin/smbpasswd .include <bsd.port.mk> diff --git a/net/samba3/distinfo b/net/samba3/distinfo index 7029bc83d152..3d176fe5bc71 100644 --- a/net/samba3/distinfo +++ b/net/samba3/distinfo @@ -1 +1 @@ -MD5 (samba-1.9.17p4.tar.gz) = dd8a65242a2bb969a9a5f3d7095df602 +MD5 (samba-1.9.18.tar.gz) = f1ff86c9b41cac82992964168656514f diff --git a/net/samba3/files/README.FreeBSD b/net/samba3/files/README.FreeBSD new file mode 100644 index 000000000000..d04f5ee89bf0 --- /dev/null +++ b/net/samba3/files/README.FreeBSD @@ -0,0 +1,19 @@ +If you want to use samba ports, + +1. Copy /usr/local/etc/smb.conf.default to /usr/local/etc/smb.conf, and edit + it. +2. Copy /usr/local/etc/rc.d/samba.sh.sample to /usr/local/etc/rc.d/samba.sh +3. Type /usr/local/etc/rc.d/samba.sh or reboot. + +See document files in /usr/local/share/doc/samba and example config files in +/usr/local/share/examples/samba for details. + +FreeBSD Samba ports for localization and encrypt passwords support are no +longer provided because these supports have been integrated into the original +distribution since 1.9.18. If you're Western European or Asian (Japanese, +Chinese, etc.) Windows users, please set "client code page" parameter in +smb.conf. See smb.conf.sample for details. If you want to use NT4+SP3 or +Win95+updates clients, set "encrypt passwords" parameter to yes and use +smbpasswd [username] to use /usr/local/private/smbpasswd for authentication. + +FreeBSD SAMBA ports maintainer: Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org> diff --git a/net/samba3/files/patch-aa b/net/samba3/files/patch-aa index 6c07f0980471..c99001099c0a 100644 --- a/net/samba3/files/patch-aa +++ b/net/samba3/files/patch-aa @@ -1,5 +1,5 @@ ---- Makefile.orig Sat Sep 27 00:04:52 1997 -+++ Makefile Wed Oct 15 17:09:58 1997 +--- Makefile.orig Thu Jan 8 03:29:04 1998 ++++ Makefile Thu Jan 8 14:52:32 1998 @@ -5,11 +5,11 @@ ########################################################################### @@ -22,31 +22,21 @@ -LIBDIR = $(BASEDIR)/lib -VARDIR = $(BASEDIR)/var +SBINDIR = $(BASEDIR)/sbin -+ETCDIR = $(BASEDIR)/etc -+LOGDIR = /var/log ++LIBDIR = $(BASEDIR)/etc ++VARDIR = /var/log # The permissions to give the executables INSTALLPERMS = 0755 -@@ -45,13 +45,13 @@ - # set these to where to find various files - # These can be overridden by command line switches (see smbd(8)) - # or in smb.conf (see smb.conf(5)) --SMBLOGFILE = $(VARDIR)/log.smb --NMBLOGFILE = $(VARDIR)/log.nmb --CONFIGFILE = $(LIBDIR)/smb.conf --LMHOSTSFILE = $(LIBDIR)/lmhosts -+SMBLOGFILE = $(LOGDIR)/smb -+NMBLOGFILE = $(LOGDIR)/nmb -+CONFIGFILE = $(ETCDIR)/smb.conf -+LMHOSTSFILE = $(ETCDIR)/lmhosts +@@ -55,7 +55,7 @@ + WEB_ROOT = $(BASEDIR) # the directory where lock files go -LOCKDIR = $(VARDIR)/locks +LOCKDIR = /var/spool/lock - # set this to the default group you want your machine to appear in - # for browsing. This can also be set in nmbd (see nmbd(8)) -@@ -383,8 +383,8 @@ + # The directory where code page definition files go + CODEPAGEDIR = $(LIBDIR)/codepages +@@ -396,8 +396,8 @@ # This is for FreeBSD # contributed by kuku@acds.physik.rwth-aachen.de # NOTE: You may need to add -DBSD44 if you have password problems @@ -55,16 +45,5 @@ +FLAGSM = -DFreeBSD -DFAST_SHARE_MODES +LIBSM = -lcrypt - - # This is for NEXTSTEP Release 2.X -@@ -684,8 +684,8 @@ - install: installbin installman installscripts - - installbin: all -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS) -- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(ETCDIR) $(LOGDIR) $(SPROGS) -+ @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(ETCDIR) $(LOGDIR) $(PROGS) - - installscripts: - @$(SHELL) $(srcdir)installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS) + # This is for OpenBSD + # contributed by todd@openbsd.org diff --git a/net/samba3/files/samba.sh.sample b/net/samba3/files/samba.sh.sample new file mode 100644 index 000000000000..50b8968ec6c5 --- /dev/null +++ b/net/samba3/files/samba.sh.sample @@ -0,0 +1,13 @@ +#!/bin/sh +smbspool=/var/spool/samba +smbd=/usr/local/sbin/smbd +nmbd=/usr/local/sbin/nmbd + +if [ -f $smbd ]; then + if [ -d $smbspool ]; then + rm -f $smbspool/* + fi + echo -n ' Samba' + $smbd -D + $nmbd -D +fi diff --git a/net/samba3/files/smb.conf.default b/net/samba3/files/smb.conf.default new file mode 100644 index 000000000000..051bc7cc023a --- /dev/null +++ b/net/samba3/files/smb.conf.default @@ -0,0 +1,257 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not many any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 + workgroup = MYGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this + load printers = yes + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +# on SystemV system setting printcap name to lpstat should allow +# you to automatically obtain a printer list from the SystemV spool +# system +; printcap name = lpstat + +# It should not be necessary to specify the print system type unless +# it is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx +; printing = bsd + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = __LOGDIR__/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /usr/local/samba/lib/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Use only if you have an NT server on your network that has been +# configured at install time to be a primary domain controller. +; domain controller = <NT-Domain-Controller-SMBName> + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Client codepage setting +# for Western European users +; client code page=850 +# for Asian Users (Japanese, Chinese, etc.) +; client code page=932 +; coding system=cap + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /usr/local/samba/lib/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /usr/local/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = __SAMBA_SPOOL__ + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba +; public = yes +; writable = yes +; printable = no +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %U option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/net/samba3/pkg-comment b/net/samba3/pkg-comment index 47492e3e2e47..21f25f97e695 100644 --- a/net/samba3/pkg-comment +++ b/net/samba3/pkg-comment @@ -1 +1 @@ -A LanManager(R)-compatible server suite for Unix +A free SMB and CIFS client and server for UNIX diff --git a/net/samba3/pkg-descr b/net/samba3/pkg-descr index f6ca2487e419..df127661ed82 100644 --- a/net/samba3/pkg-descr +++ b/net/samba3/pkg-descr @@ -8,9 +8,3 @@ or FreeBSD printers as if they were local printers. Some of the most popular Lan Manager compatible clients include Lan Manager itself, Windows for Workgroups, OS/2 and Windows NT. - -Please note that if you want to use Windows NT 4.0 + Service Pack 3 -or above as clients, you have to use -des version of samba ports. --des version is not redistributable as a binary package because of -the export control of US. Please type make install at net/samba-des -in ports collection. diff --git a/net/samba3/pkg-plist b/net/samba3/pkg-plist index 077dda64967a..2c64fb8f4739 100644 --- a/net/samba3/pkg-plist +++ b/net/samba3/pkg-plist @@ -7,6 +7,9 @@ bin/smbtar bin/addtosmbpass bin/testparm bin/testprns +bin/mksmbpasswd.sh +bin/make_smbcodepage +bin/make_printerdef sbin/smbd sbin/nmbd man/man1/smbstatus.1.gz @@ -15,6 +18,7 @@ man/man1/smbrun.1.gz man/man1/smbtar.1.gz man/man1/testparm.1.gz man/man1/testprns.1.gz +man/man1/make_smbcodepage.1.gz man/man5/smb.conf.5.gz man/man7/samba.7.gz man/man8/smbd.8.gz @@ -44,6 +48,7 @@ share/doc/samba/faq/sambafaq.txt share/doc/samba/Application_Serving.txt share/doc/samba/BROWSING.txt share/doc/samba/BUGS.txt +share/doc/samba/CVS_ACCESS.txt share/doc/samba/DIAGNOSIS.txt share/doc/samba/DNIX.txt share/doc/samba/DOMAIN.txt @@ -52,24 +57,88 @@ share/doc/samba/ENCRYPTION.txt share/doc/samba/Faxing.txt share/doc/samba/GOTCHAS.txt share/doc/samba/HINTS.txt +share/doc/samba/INSTALL.sambatar share/doc/samba/MIRRORS.txt +share/doc/samba/NT4_PlainPassword.reg +share/doc/samba/NTDOMAIN.txt share/doc/samba/NetBIOS.txt share/doc/samba/OS2-Client-HOWTO.txt +share/doc/samba/README +share/doc/samba/README.DCEDFS +share/doc/samba/README.FreeBSD +share/doc/samba/README.jis +share/doc/samba/README.sambatar +share/doc/samba/PRINTER_DRIVER.txt share/doc/samba/Passwords.txt share/doc/samba/Printing.txt +share/doc/samba/PROJECTS share/doc/samba/SCO.txt share/doc/samba/Speed.txt share/doc/samba/Support.txt share/doc/samba/Tracing.txt +share/doc/samba/THANKS share/doc/samba/UNIX-SMB.txt share/doc/samba/Win95.txt +share/doc/samba/Win95_PlainPassword.reg share/doc/samba/UNIX_INSTALL.txt +share/doc/samba/WHATSNEW.txt share/doc/samba/WinNT.txt +share/doc/samba/announce +share/doc/samba/cifsntdomain.txt +share/doc/samba/history share/doc/samba/security_level.txt -share/doc/samba/README.DCEDFS -share/doc/samba/README.jis -share/doc/samba/README.sambatar +share/doc/samba/wfw_slip.htm +share/examples/samba/dce-dfs/README +share/examples/samba/dce-dfs/smb.conf +share/examples/samba/tridge/smb.conf.WinNT +share/examples/samba/tridge/smb.conf.vittjokk +share/examples/samba/tridge/smb.conf.fjall +share/examples/samba/tridge/README +share/examples/samba/tridge/smb.conf.lapland +share/examples/samba/tridge/smb.conf +share/examples/samba/thoralf/smb.conf +share/examples/samba/svr4-startup/README +share/examples/samba/svr4-startup/samba.server +share/examples/samba/misc/extra_smbstatus +share/examples/samba/misc/wall.perl +share/examples/samba/validchars/validchr.com +share/examples/samba/validchars/readme +share/examples/samba/validchars/validchr.c +share/examples/samba/validchars/msdos70.out +share/examples/samba/validchars/nwdos70.out +share/examples/samba/printing/smbprint +share/examples/samba/printing/smbprint.sysv +share/examples/samba/printer-accounting/hp5-redir +share/examples/samba/printer-accounting/acct-all +share/examples/samba/printer-accounting/acct-sum +share/examples/samba/printer-accounting/README +share/examples/samba/printer-accounting/lp-acct +share/examples/samba/printer-accounting/printcap +share/examples/samba/simple/README +share/examples/samba/simple/smb.conf +share/examples/samba/smb.conf.default +share/examples/samba/README etc/rc.d/samba.sh.sample -etc/smb.conf.sample +etc/smb.conf.default +etc/codepages/codepage.437 +etc/codepages/codepage.850 +etc/codepages/codepage.852 +etc/codepages/codepage.932 +@exec mkdir %D/private ; if [ ! -f %D/private/smbpasswd ] ; then chown -R root.wheel %D/private ; cat /etc/passwd | %D/bin/mksmbpasswd.sh > %D/private/smbpasswd ; chmod 500 %D/private ; chmod 600 %D/private/smbpasswd ; fi +@exec mkdir -p /var/spool/samba ; chmod 1777 /var/spool/samba +@exec cat %D/share/doc/samba/README.FreeBSD +@unexec echo "Warning: If you will *NOT* use this package anymore, please remove %D/private/smbpasswd manually." +@unexec rm -rf /var/spool/samba @dirrm share/doc/samba/faq @dirrm share/doc/samba +@dirrm share/examples/samba/dce-dfs +@dirrm share/examples/samba/tridge +@dirrm share/examples/samba/thoralf +@dirrm share/examples/samba/svr4-startup +@dirrm share/examples/samba/misc +@dirrm share/examples/samba/validchars +@dirrm share/examples/samba/printing +@dirrm share/examples/samba/printer-accounting +@dirrm share/examples/samba/simple +@dirrm share/examples/samba +@dirrm etc/codepages |