diff options
Diffstat (limited to 'Tools')
28 files changed, 52 insertions, 52 deletions
diff --git a/Tools/make_index b/Tools/make_index index 0d23456d4686..d5b5d9e3fc8c 100644 --- a/Tools/make_index +++ b/Tools/make_index @@ -42,7 +42,7 @@ sub recurse { foreach $name (@{$pkg->{edep}}) { recurse($index{$name}); push(@deps, @{$index{$name}->{rdep}}); - } + } $pkg->{edep} = uniqify(@{$pkg->{edep}}, @deps); # same as above except for patch-depends this time @@ -132,7 +132,7 @@ foreach $name (keys %index) { my @edep = map { by_path($_, $name) } @{$pkg->{edep}}; $pkg->{edep} = \@edep; } - # + # if (@{$pkg->{pdep}}) { my @pdep = map { by_path($_, $name) } @{$pkg->{pdep}}; $pkg->{pdep} = \@pdep; @@ -157,7 +157,7 @@ foreach $name (keys %index) { # With all that done we're finally ready to write out the new # INDEX file one port at a time. foreach $name (@names) { - my $pkg = $index{$name}; + my $pkg = $index{$name}; if (exists $pkg->{'PRINTED'}) { print STDERR "Warning: Duplicate INDEX entry: $name\n"; } else { diff --git a/Tools/portbuild/README b/Tools/portbuild/README index a65eddc47ee2..72e7beee0284 100644 --- a/Tools/portbuild/README +++ b/Tools/portbuild/README @@ -24,7 +24,7 @@ find. exported to the build machines. (Hint: you should probably add "-alldirs" to /etc/exports.) - (3) Setup ssh for root between the build machines and the master. It + (3) Setup ssh for root between the build machines and the master. It has to work in both directions. (4) Put the list of machines you have in "mlist". There is a sample @@ -38,7 +38,7 @@ find. Because it takes the integer value this algorithm will select machines with loads in a certain range, not just the single least loaded machine. - Note that you can put the master here as well, but our experience + Note that you can put the master here as well, but our experience is that our NFS is likely to act up when the master is too busy. Even with a two-processor P6-200, we had to refrain from running any compilations on the master to get NFS to work reliably. diff --git a/Tools/portbuild/scripts/allgohans b/Tools/portbuild/scripts/allgohans index 2caa379809a6..aa851b729e7c 100755 --- a/Tools/portbuild/scripts/allgohans +++ b/Tools/portbuild/scripts/allgohans @@ -10,9 +10,9 @@ doarch() { echo "Invalid arch" exit 1 fi - + machines=$(awk '{print $1}' ${pb}/${arch}/mlist) - + for i in ${machines}; do . ${pb}/${arch}/portbuild.conf if [ -f "${pb}/${arch}/portbuild.${i}" ]; then @@ -26,7 +26,7 @@ doarch() { } id=$(whoami) -if [ "${id}" = "root" ]; then +if [ "${id}" = "root" ]; then arch=$1 shift root=1 diff --git a/Tools/portbuild/scripts/buildfailure b/Tools/portbuild/scripts/buildfailure index 8194e080fc29..e15d8de0c975 100755 --- a/Tools/portbuild/scripts/buildfailure +++ b/Tools/portbuild/scripts/buildfailure @@ -1,6 +1,6 @@ #!/bin/sh # -# buildfailure <arch> <branch> <pkgname> +# buildfailure <arch> <branch> <pkgname> cleanup() { echo "Problem writing new failure file!" diff --git a/Tools/portbuild/scripts/checkmachines b/Tools/portbuild/scripts/checkmachines index c6108d63b0a4..fe3ac9ff8d22 100755 --- a/Tools/portbuild/scripts/checkmachines +++ b/Tools/portbuild/scripts/checkmachines @@ -8,7 +8,7 @@ # information has been updated in the last 15 seconds (should be updated by # the reportload script every 5 seconds). If so, then divide the number of # running jobs on the client by its weighting in mlist, and output the -# machine(s) with the minimum value to ${buildroot}/ulist. +# machine(s) with the minimum value to ${buildroot}/ulist. # # Dividing by the weight has the effect of grouping machines with similar # job load (e.g. a weight of 5 will rank machines with job loads 0, 1, 2, 3, 4 @@ -23,7 +23,7 @@ arches=$* while true; do for i in ${arches}; do mlist=${buildroot}/${i}/mlist - + set $(cat $mlist) while [ $# -gt 0 ]; do m=$1 diff --git a/Tools/portbuild/scripts/clean-chroot b/Tools/portbuild/scripts/clean-chroot index bb9a89925e1c..3911470fd284 100755 --- a/Tools/portbuild/scripts/clean-chroot +++ b/Tools/portbuild/scripts/clean-chroot @@ -18,7 +18,7 @@ fi if [ ${arch} = "i386" ]; then chroot ${chroot} umount -f /compat/linux/proc fi - + umount -f ${chroot}/a/ports 2> /dev/null umount -f ${chroot}/usr/opt/doc 2> /dev/null umount -f ${chroot}/usr/src 2> /dev/null diff --git a/Tools/portbuild/scripts/dopackages b/Tools/portbuild/scripts/dopackages index f33f3b71e40d..1f3e475cef64 100755 --- a/Tools/portbuild/scripts/dopackages +++ b/Tools/portbuild/scripts/dopackages @@ -99,7 +99,7 @@ restrictedlist () { echo "restricted list generation ended at $(date)" echo $(grep -c '^#' ${pb}/${arch}/${branch}/restricted.sh) "ports in ${pb}/${arch}/${branch}/restricted.sh" } - + # usage: cdromlist pb scripts branch cdromlist () { pb=$1 @@ -316,7 +316,7 @@ if [ "$skipstart" = 0 ]; then cvs -qR update -PdA # XXX Check for conflicts fi - + if [ "$nocvs" = 0 ]; then echo "================================================" echo "running cvs update on ${SRCBASE}" @@ -330,8 +330,8 @@ if [ "$skipstart" = 0 ]; then echo "running make checksubdirs" echo "================================================" cd ${PORTSDIR} - make checksubdirs - + make checksubdirs + # this one not run in background to check return status if [ "$noduds" = 0 ]; then makeduds ${pb} ${arch} ${scripts} ${branch} @@ -362,13 +362,13 @@ if [ "$skipstart" = 0 ]; then if [ "$norestr" = 0 ]; then restrictedlist ${pb} ${arch} ${scripts} ${branch} & fi - + if [ "$cdrom" = 1 ]; then cdromlist ${pb} ${arch} ${scripts} ${branch} & fi ${scripts}/makeparallel ${arch} ${branch} - + if [ "$nodummy" = 0 ]; then dummypkgs="" for i in ${dummyports}; do @@ -379,7 +379,7 @@ if [ "$skipstart" = 0 ]; then fi done fi - + cd ${pb}/${arch} mkdir -p ${pb}/${arch}/${branch}/bak cd ${pb}/${arch}/${branch}/bak @@ -405,7 +405,7 @@ if [ "$skipstart" = 0 ]; then echo "Removing $(wc -l ${pb}/${arch}/${branch}/.oldports) packages in preparation for incremental build" rm ${INDEXFILE}.old1 ${INDEXFILE}.1 - + cd ${PACKAGES}/All sed "s,$,${PKGSUFFIX}," ${pb}/${arch}/${branch}/.oldports | xargs rm -f ${scripts}/prunepkgs ${PORTSDIR}/${INDEXFILE} ${PACKAGES} @@ -464,7 +464,7 @@ wait if [ "$nobuild" = 0 ]; then cd ${pb}/${arch}/${branch} - if [ "$cont" = 1 ]; then + if [ "$cont" = 1 ]; then find errors/ -name \*.log | sed -e 's,\.log$,,' -e 's,^errors/,,' >> duds.errors cat duds duds.errors | sort -u > duds.new mv duds.new duds @@ -497,7 +497,7 @@ if [ "$nobuild" = 0 ]; then cd ${pb}/${arch}/${branch} if grep -qE '(ptimeout|pnohang): killing' make.0; then echo "The following port(s) timed out:" - grep -E '(ptimeout|pnohang): killing' make.0 | sed -e 's/^.*ptimeout:/ptimeout:/' -e 's/^.*pnohang:/pnohang:/' + grep -E '(ptimeout|pnohang): killing' make.0 | sed -e 's/^.*ptimeout:/ptimeout:/' -e 's/^.*pnohang:/pnohang:/' fi ls -asFlrt ${pb}/${arch}/${branch}/packages/All > ${pb}/${arch}/${branch}/logs/ls-lrt-1 @@ -547,7 +547,7 @@ if grep -qE '(ptimeout|pnohang): killing' make.1; then fi # Clean up temporary duds file -if [ "$cont" = 1 ]; then +if [ "$cont" = 1 ]; then cp duds.orig duds fi diff --git a/Tools/portbuild/scripts/makeduds b/Tools/portbuild/scripts/makeduds index e52326d0cd21..a394f7b5acf9 100755 --- a/Tools/portbuild/scripts/makeduds +++ b/Tools/portbuild/scripts/makeduds @@ -37,4 +37,4 @@ sort ${duds} > ${duds}.tmp mv -f ${duds}.tmp ${duds} cp ${duds} ${duds}.orig -grep -Ff ${duds}.orig ${index} | cut -f 1 -d \| > ${duds}.full +grep -Ff ${duds}.orig ${index} | cut -f 1 -d \| > ${duds}.full diff --git a/Tools/portbuild/scripts/makeworld b/Tools/portbuild/scripts/makeworld index 7ad01f86d6af..9b50c2d3907d 100755 --- a/Tools/portbuild/scripts/makeworld +++ b/Tools/portbuild/scripts/makeworld @@ -44,7 +44,7 @@ fi if [ "$nocvs" = "0" ]; then echo "==> Updating source tree" - cvs -Rq update -Pd + cvs -Rq update -Pd error=$? if [ "$error" != "0" ]; then exit 1 @@ -60,7 +60,7 @@ if [ "$error" != "0" ]; then exit $? fi -echo "==> Cleaning up chroot" +echo "==> Cleaning up chroot" rm -rf /var/chroot/ chflags -R noschg /var/chroot/ rm -rf /var/chroot/ diff --git a/Tools/portbuild/scripts/pnohang.c b/Tools/portbuild/scripts/pnohang.c index a85b7b5181af..664020a61aed 100644 --- a/Tools/portbuild/scripts/pnohang.c +++ b/Tools/portbuild/scripts/pnohang.c @@ -65,7 +65,7 @@ main(int argc, char *argv[]) sigemptyset(&sv.sa_mask); sv.sa_flags = 0; sigaction(SIGTERM, &sv, 0); - + /* parent */ child = wait(&status); /*printf("exited child is %d, status is %d\n", child, status);*/ diff --git a/Tools/portbuild/scripts/portbuild b/Tools/portbuild/scripts/portbuild index 50effd8234ad..5b3df12fc56f 100755 --- a/Tools/portbuild/scripts/portbuild +++ b/Tools/portbuild/scripts/portbuild @@ -8,7 +8,7 @@ mount_fs() mntpt=$2 master=$3 - if [ ${disconnected} = 1 ]; then + if [ ${disconnected} = 1 ]; then mount -t nullfs -r ${fs} ${mntpt} else mount -o nfsv3,intr -r ${master}:${fs} ${mntpt} @@ -43,12 +43,12 @@ cleanup() pkgname=$5 #umount ${chroot}/proc - + echo ARCH=${arch} if [ ${arch} = "i386" ]; then umount -f ${chroot}/compat/linux/proc fi - + umount -f ${chroot}/a/ports umount -f ${chroot}/usr/opt/doc umount -f ${chroot}/usr/src diff --git a/Tools/portbuild/scripts/prunepkgs b/Tools/portbuild/scripts/prunepkgs index f46eaafe9426..30521eee558c 100755 --- a/Tools/portbuild/scripts/prunepkgs +++ b/Tools/portbuild/scripts/prunepkgs @@ -17,7 +17,7 @@ testprunelink() { if [ ! -e $1/ ]; then dest=$(readlink $1) echo "$1 -> $dest pruned." - if [ "${dummy}" = "0" ]; then + if [ "${dummy}" = "0" ]; then rm -f $1 fi fi diff --git a/Tools/portbuild/scripts/setupnode b/Tools/portbuild/scripts/setupnode index a61c4edebfd3..a16d98ed389f 100755 --- a/Tools/portbuild/scripts/setupnode +++ b/Tools/portbuild/scripts/setupnode @@ -36,7 +36,7 @@ if [ "$nocopy" = 0 ]; then echo "not copying bindist to $(hostname) since it is already up to date" else echo "copying bindist to $(hostname)" - if [ ${disconnected} = 0 ]; then + if [ ${disconnected} = 0 ]; then cp -p ${pb}/${arch}/${branch}/tarballs/bindist.tar ${tmpdir}/${branch}/tarballs fi fi diff --git a/Tools/scripts/MOVEDlint.awk b/Tools/scripts/MOVEDlint.awk index cf5a1a634edd..ff204b24b80d 100755 --- a/Tools/scripts/MOVEDlint.awk +++ b/Tools/scripts/MOVEDlint.awk @@ -60,7 +60,7 @@ $1 !~ /^[^\/]+\/[^\/]+$/ || $2 !~ /^([^\/]+\/[^\/]+)?$/ { error[NR] = 1 next } - + $3 !~ /^20[0-3][0-9]-[01][0-9]-[0-3][0-9]$/ { printf "%5d: missing YYYY-MM-DD date\n", NR | sort error[NR] = 1 diff --git a/Tools/scripts/README b/Tools/scripts/README index d523f2f9e3f4..3d14587f8048 100644 --- a/Tools/scripts/README +++ b/Tools/scripts/README @@ -20,7 +20,7 @@ getpr - downloads a problem report from GNATS and attempts to extract the patch, shar, uuencoded file from it. this probably needs to be checked for potential security problems. gnomedepends - Analyse pkg/PLIST and give an advice as to which GNOME ports - should be listes in {RUN,LIB}_DEPENDS for this port + should be listes in {RUN,LIB}_DEPENDS for this port plist - automate (mostly, at least) pkg-plist generation prpatch - just does `patch $1 < pr-patch' (pr-patch is created by getpr) prdone - checks in the port, attempting to fill out the commit message using @@ -40,7 +40,7 @@ Not on filesystem - jade from jade-1.2.1 Only on filesystem - jadefoo No package md5 available for lessecho File nsgmls owned by multiple packages sp-1.3.4,jade-1.2.1 -No filesystem md5 available for setuser, but it exists +No filesystem md5 available for setuser, but it exists For sgmlnorm, package md5 312d7b63d591e07629e0da4ae4a0ac07 is DIFFERENT from fs md5 of 19f1f901911b90d8e04c6ea69e1b0541! change $do_md5 to 0 to not check md5, and $do_fs to 0 to not check for diff --git a/Tools/scripts/README.patchtool b/Tools/scripts/README.patchtool index 85204e7f91f5..1057d0e3ddd1 100644 --- a/Tools/scripts/README.patchtool +++ b/Tools/scripts/README.patchtool @@ -122,7 +122,7 @@ $ vi Makefile $ make fetch makesum patch [several patches are failing to apply cleanly] $ cd work/foo-1.0 -[doing merging work, finally all changes are merged] +[doing merging work, finally all changes are merged] $ cd ../../ ; make all install [compile and works like a charm] $ pwd diff --git a/Tools/scripts/addport b/Tools/scripts/addport index dc8e9b6fa168..efeb6d3a4b40 100755 --- a/Tools/scripts/addport +++ b/Tools/scripts/addport @@ -210,7 +210,7 @@ foreach my $thisdir (@dirs) { } chomp(my $cvs_category = $category); $cvs_category =~ s/-/_/g; - + $module = "$l10nprefix{$category}$portname"; if ($interactive) { diff --git a/Tools/scripts/chkdepschain.py b/Tools/scripts/chkdepschain.py index f8d5c757507a..5055d23a88b5 100755 --- a/Tools/scripts/chkdepschain.py +++ b/Tools/scripts/chkdepschain.py @@ -187,7 +187,7 @@ class PortInfo: topdeps.extend(botdeps) self.__bt_deps = tuple(topdeps) return self.__bt_deps - + def get_rt_deps(self): if self.__rt_deps == None: topdeps = self.getdeps() diff --git a/Tools/scripts/chkmodules.pl b/Tools/scripts/chkmodules.pl index d1f97a857743..a789a79a65ba 100755 --- a/Tools/scripts/chkmodules.pl +++ b/Tools/scripts/chkmodules.pl @@ -114,7 +114,7 @@ print join("\n ", print join("\n ", "\nModules that are not sorted correctly:", - map("$_: $missorted{$_}", sort { $a <=> $b } keys %missorted)), "\n" + map("$_: $missorted{$_}", sort { $a <=> $b } keys %missorted)), "\n" if %missorted; print join("\n ", diff --git a/Tools/scripts/close-pr b/Tools/scripts/close-pr index c1a9476fc98d..b336c6d5a82b 100755 --- a/Tools/scripts/close-pr +++ b/Tools/scripts/close-pr @@ -40,7 +40,7 @@ mode=local usage=" local Usage: edit-pr [-V|--version] [-h|--help] PR -network Usage: nedit-pr [-V|--version] [-h|--help] [-d|--directory gnats_db_alias] +network Usage: nedit-pr [-V|--version] [-h|--help] [-d|--directory gnats_db_alias] [-H|--host hostname] [-P|--port port_number] [-v|--user userid] [-w|--passwd password] PR " @@ -208,7 +208,7 @@ while [ "$checking" != "" ]; do echo "$errors" read fixme case "$fixme" in - q* | Q*) + q* | Q*) echo "PR $pr_id not updated: changed file is in $new.changed" mv $new $new.changed $PR_EDIT --unlock $pr_id diff --git a/Tools/scripts/consistency-check b/Tools/scripts/consistency-check index ccd29bdd0676..c47269180453 100755 --- a/Tools/scripts/consistency-check +++ b/Tools/scripts/consistency-check @@ -98,7 +98,7 @@ foreach (sort keys %files) { "DIFFERENT from fs md5 of $fsmd5tmp!\n"; } } - } + } } exit; diff --git a/Tools/scripts/getpr b/Tools/scripts/getpr index 4a88af11a86e..a75012495cd0 100755 --- a/Tools/scripts/getpr +++ b/Tools/scripts/getpr @@ -5,7 +5,7 @@ # $FreeBSD$ # -use strict; +use strict; my $pr = shift; my $user = shift; diff --git a/Tools/scripts/gnomedepends.py b/Tools/scripts/gnomedepends.py index 74041a142f97..ab8774dd6ad4 100755 --- a/Tools/scripts/gnomedepends.py +++ b/Tools/scripts/gnomedepends.py @@ -2,7 +2,7 @@ # # gnomedepends # Analyse pkg/PLIST and give an advice as to which GNOME -# ports should be listes in {RUN,LIB}_DEPENDS for this port +# ports should be listes in {RUN,LIB}_DEPENDS for this port # # ---------------------------------------------------------------------------- # "THE BEER-WARE LICENSE" (Revision 42, (c) Poul-Henning Kamp): diff --git a/Tools/scripts/mkptools/mkpextr b/Tools/scripts/mkptools/mkpextr index 4e2fe8e97e69..fdac12d7d4ca 100755 --- a/Tools/scripts/mkptools/mkpextr +++ b/Tools/scripts/mkptools/mkpextr @@ -101,7 +101,7 @@ sub writemk { appendvar("LIB_DEPENDS", "gtk12.2:\${PORTSDIR}/x11-toolkits/gtk12"); - $tmp{"GTK_CONFIG"} = + $tmp{"GTK_CONFIG"} = "\${X11BASE}/bin/gtk12-config"; appendvar("CONFIGURE_ENV", diff --git a/Tools/scripts/parse-kdump.tcl b/Tools/scripts/parse-kdump.tcl index 1c23f0cd3856..4abea3f7aee8 100644 --- a/Tools/scripts/parse-kdump.tcl +++ b/Tools/scripts/parse-kdump.tcl @@ -100,7 +100,7 @@ proc main {} { puts stderr "Couldn't parse open args from $cargs"; exit 1; } - + #puts stderr "Open with $flags, mode $mode"; set interested [list $callname $flags $mode]; } elseif {$callname == "chdir"} { @@ -174,7 +174,7 @@ proc main {} { default { puts "Got a [lindex $interested 0] $fname"; } - } + } } } diff --git a/Tools/scripts/patchtool.py b/Tools/scripts/patchtool.py index 234fdc04040c..ba35a1cea426 100755 --- a/Tools/scripts/patchtool.py +++ b/Tools/scripts/patchtool.py @@ -231,7 +231,7 @@ def gendiff(path, wrksrc, outfile = ''): # Automatically generate a name for a patch based on its path relative to # wrksrc. Use simple scheme to ensute 1-to-1 mapping between path and # patchname - replace all '_' with '__' and all '/' with '_'. -# +# def makepatchname(path, patchdir = ''): SRS = Vars.SLASH_REPL_SYMBOL retval = Vars.PATCH_PREFIX + \ diff --git a/Tools/scripts/portsearch b/Tools/scripts/portsearch index 88cd4a6ba68e..e5390f291987 100755 --- a/Tools/scripts/portsearch +++ b/Tools/scripts/portsearch @@ -32,7 +32,7 @@ # of which may be empty. The fields are: # # distribution-name|port-path|installation-prefix|comment| \ -# description-file|maintainer|categories|build deps|run deps|www site +# description-file|maintainer|categories|build deps|run deps|www site use strict; @@ -132,7 +132,7 @@ MAIN: { @list = split(/\|/); $match = 1; - # All searches are case-insensitive! + # All searches are case-insensitive! # For ``-d'' search both build & run depends. # Only fail to match if not found in either. foreach $key (keys (%opts)) { diff --git a/Tools/scripts/update-patches b/Tools/scripts/update-patches index c53f0e30060c..51e4b4fc5571 100755 --- a/Tools/scripts/update-patches +++ b/Tools/scripts/update-patches @@ -28,7 +28,7 @@ # Find out all .orig files and strip the name to what diff will use cd $PATCH_WRKSRC && find . -type f -name '*.orig' | fgrep -v $DISTORIG | \ sed -e "s,^./\(.*\)\.orig\$,\1," | { -while read file +while read file do echo 1>&2 "Processing $file" # look in patchdir for an existing patchfile matching this @@ -78,7 +78,7 @@ do case $i in \ *.orig|*.rej|*~) ;; *) - for j in $accounted + for j in $accounted do if [ $j = $i ] then |