diff options
Diffstat (limited to 'mail/dovecot')
| -rw-r--r-- | mail/dovecot/Makefile | 6 | ||||
| -rw-r--r-- | mail/dovecot/distinfo | 2 | ||||
| -rw-r--r-- | mail/dovecot/files/patch-dovecot-example.conf | 67 |
3 files changed, 55 insertions, 20 deletions
diff --git a/mail/dovecot/Makefile b/mail/dovecot/Makefile index 7e86599b02df..4774569feabc 100644 --- a/mail/dovecot/Makefile +++ b/mail/dovecot/Makefile @@ -1,12 +1,12 @@ # New ports collection makefile for: dovecot # Date created: 12/08/2002 -# Whom: Dominic Marks <d.marks@student.umist.ac.uk> +# Whom: Dominic Marks <dominic.marks@btinternet.com> # # $FreeBSD$ # PORTNAME= dovecot -PORTVERSION= 0.99.9.1 +PORTVERSION= 0.99.10 CATEGORIES= mail ipv6 MASTER_SITES= http://dovecot.procontrol.fi/ @@ -91,7 +91,7 @@ LIB_DEPENDS+= pq.3:${PORTSDIR}/databases/postgresql CONFIGURE_ARGS+= --with-pgsql .endif -pre-everything: +pre-everything:: @${ECHO_MSG} "==> Dovecot Options" @${ECHO_MSG} "==> See the Makefile for descriptions." @${ECHO_MSG} "==> ------------------------------------------" diff --git a/mail/dovecot/distinfo b/mail/dovecot/distinfo index 2576efd71b5e..7f1429c69dcb 100644 --- a/mail/dovecot/distinfo +++ b/mail/dovecot/distinfo @@ -1 +1 @@ -MD5 (dovecot-0.99.9.1.tar.gz) = d8d51af34a3467b65b20dc9d09140fbe +MD5 (dovecot-0.99.10.tar.gz) = 26d8452366a28418cc8a114781a721b6 diff --git a/mail/dovecot/files/patch-dovecot-example.conf b/mail/dovecot/files/patch-dovecot-example.conf index 21bd705f7319..27f2883a551a 100644 --- a/mail/dovecot/files/patch-dovecot-example.conf +++ b/mail/dovecot/files/patch-dovecot-example.conf @@ -1,5 +1,5 @@ ---- dovecot-example.conf.orig Fri Apr 4 13:17:25 2003 -+++ dovecot-example.conf Sat Apr 19 14:11:40 2003 +--- dovecot-example.conf.orig Thu Jun 26 17:11:06 2003 ++++ dovecot-example.conf Thu Jun 26 22:36:08 2003 @@ -7,11 +7,11 @@ # --with-ssldir=/etc/ssl @@ -58,9 +58,9 @@ -#login_executable = /usr/libexec/dovecot/imap-login +login_executable = %%PREFIX%%/libexec/dovecot/imap-login - # User to use for the login process. The user must belong to a group where - # only it has access, it's used to control access for authentication process - # named sockets. + # User to use for the login process. Create a completely new user for this, + # and don't use it anywhere else. The user must also belong to a group where + # only it has access, it's used to control access for authentication process. -#login_user = dovecot +login_user = dovecot @@ -95,9 +95,18 @@ -#verbose_ssl = no +verbose_ssl = yes - # Valid UID/GID ranges for users, defaults to 500 and above. This is mostly + # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. -@@ -160,7 +160,7 @@ +@@ -155,7 +155,7 @@ + # non-valid GID as primary group ID aren't allowed to log in. If user + # belongs to supplementary groups with non-valid GIDs, those groups are + # not set. +-#first_valid_gid = 1 ++first_valid_gid = 0 + #last_valid_gid = 0 + + # ':' separated list of directories under which chrooting is allowed for mail +@@ -164,7 +164,7 @@ # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. See doc/configuration.txt for more information. @@ -106,7 +115,7 @@ # Default MAIL environment to use when it's not set. By leaving this empty # dovecot tries to do some automatic detection as described in -@@ -179,7 +179,7 @@ +@@ -183,7 +183,7 @@ # mbox:~/mail/:INBOX=/var/mail/%u # mbox:/var/mail/%d/%n/:INDEX=/var/indexes/%d/%n # @@ -115,7 +124,7 @@ # Space-separated list of fields to cache for all mails. Currently these # fields are allowed followed by a list of commands they speed up: -@@ -224,7 +224,7 @@ +@@ -228,7 +228,7 @@ # arrives in half a hour, Dovecot closes the connection. This is still # fine, except Outlook doesn't connect back so you don't see if new mail # arrives. @@ -124,7 +133,7 @@ # Dovecot can notify client of new mail in selected mailbox soon after it's # received. This setting specifies the minimum interval in seconds between -@@ -249,7 +249,7 @@ +@@ -253,7 +253,7 @@ # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. @@ -133,7 +142,7 @@ # Use mmap() instead of read() to read mail files. read() seems to be a bit # faster with my Linux/x86 and it's better with NFS, so that's the default. -@@ -261,7 +261,7 @@ +@@ -265,7 +265,7 @@ # know any MUA which would modify mail files directly. IMAP protocol also # requires that the mails don't change, so it would be problematic in any case. # If you care about performance, enable it. @@ -142,7 +151,7 @@ # Check if mails' content has been changed by external programs. This slows # down things as extra stat() needs to be called for each file. If changes are -@@ -280,7 +280,7 @@ +@@ -284,7 +284,7 @@ # with is important to avoid deadlocks if other MTAs/MUAs are using both fcntl # and flock. Some operating systems don't allow using both of them # simultaneously, eg. BSDs. If dotlock is used, it's always created first. @@ -151,7 +160,7 @@ # Should we create dotlock file even when we want only a read-lock? Setting # this to yes hurts the performance when the mailbox is accessed simultaneously -@@ -310,7 +310,7 @@ +@@ -314,7 +314,7 @@ ## # Executable location @@ -160,7 +169,15 @@ # Set max. process size in megabytes. Most of the memory goes to mmap()ing # files, so it shouldn't harm much even if this limit is set pretty high. -@@ -321,7 +321,7 @@ +@@ -322,14 +322,14 @@ + + # Support for dynamically loadable modules. + #imap_use_modules = no +-#imap_modules = /usr/lib/dovecot/imap ++#imap_modules = %%PREFIX%%/lib/dovecot/imap + + ## + ## POP3 process ## # Executable location @@ -169,7 +186,16 @@ # Set max. process size in megabytes. Most of the memory goes to mmap()ing # files, so it shouldn't harm much even if this limit is set pretty high. -@@ -374,10 +374,10 @@ +@@ -337,7 +337,7 @@ + + # Support for dynamically loadable modules. + #pop3_use_modules = no +-#pop3_modules = /usr/lib/dovecot/pop3 ++#pop3_modules = %%PREFIX%%/lib/dovecot/pop3 + + ## + ## Authentication processes +@@ -386,10 +386,10 @@ # vpopmail: vpopmail authentication # ldap <config path>: LDAP, see doc/dovecot-ldap.conf # pgsql <config path>: a PostgreSQL database, see doc/dovecot-pgsql.conf @@ -182,7 +208,16 @@ # Set max. process size in megabytes. #auth_process_size = 256 -@@ -402,7 +402,7 @@ +@@ -397,7 +397,7 @@ + # User to use for the process. This user needs access to only user and + # password databases, nothing else. Only shadow and pam authentication + # requires roots, so use something else if possible. +-auth_user = root ++auth_user = dovecot + + # Directory where to chroot the process. Most authentication backends don't + # work if this is set, and there's no point chrooting if auth_user is root. +@@ -418,7 +418,7 @@ # More verbose logging. Useful for figuring out why authentication isn't # working. |