diff options
Diffstat (limited to 'www/cacheboy15-devel/Makefile')
| -rw-r--r-- | www/cacheboy15-devel/Makefile | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/www/cacheboy15-devel/Makefile b/www/cacheboy15-devel/Makefile new file mode 100644 index 000000000000..18b03502d5bf --- /dev/null +++ b/www/cacheboy15-devel/Makefile @@ -0,0 +1,417 @@ +# New ports collection makefile for: squid24 +# Date created: Tue Mar 27 14:56:08 CEST 2001 +# Whom: Adrian Chadd <adrian@FreeBSD.org> +# +# $FreeBSD$ +# +# Tunables not (yet) configurable via 'make config': +# SQUID_{U,G}ID +# Which user/group Squid should run as (default: squid/squid). +# The user and group will be created if they do not already exist using +# a uid:gid of 100:100. +# NOTE: older versions of Squid defaulted to nobody/nogroup. +# If you wish to run Squid as "nobody" (which is not recommended), please +# define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment +# before you start the update or installation of this port. +# +# SQUID_LANGUAGES +# A list of languages for which error page files should be installed +# (default: all) +# +# E.g. use `make SQUID_LANGUAGES="English French"' if you want to +# install the files for these languages only. +# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's +# definition to see which values are valid. +# +# SQUID_DEFAULT_LANG +# If you define SQUID_LANGUAGES, select which language should be the default +# one (this variable defaults to English). This setting can be overwritten +# with squid.conf's error_directory directive. +# +# SQUID_CONFIGURE_ARGS +# Additional configuration options. +# +# To enable them, use e.g +# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' +# +# The list below may be incomplete, please see the configure script +# in the Squid source distribution for the complete list of additional +# options. +# Note that you probably do not need to worry about these options in most +# cases, they are included in case you want to experiment with them. +# +# --enable-dlmalloc +# Compile and use the malloc package from Doug Lea +# --enable-gnuregex +# Compile and use the supplied GNUregex routines instead of BSD regex +# (not recommended). +# --enable-xmalloc-statistics +# Show malloc statistics in status page +# --enable-cachemgr-hostname=some.hostname +# Set an explicit hostname in cachemgr.cgi +# --enable-truncate +# Use truncate() rather than unlink() +# --disable-unlinkd +# Do not use "unlinkd" +# --with-aufs-threads=N_THREADS +# Tune the number of worker threads for the aufs object +# --with-coss-membuf-size +# COSS membuf size (default: 1048576 bytes) +# --with-maxfd=N +# Override the maximum number of filedescriptors. Useful if you +# build as another user who is not privileged to use the amount +# of filedescriptors the resulting binary is expected to support. +# --enable-ntlm-fail-open +# Enable NTLM fail open, where a helper that fails one of the +# Authentication steps can allow Squid to still authenticate the user +# --enable-x-accelerator-vary +# Enable support for the X-Accelerator-Vary HTTP header. Can be used +# to indicate variance within an accelerator setup. Typically used +# together with other code that adds custom HTTP headers to the +# requests. +# --enable-forward-log +# Enable experimental forward_log directive. +# --enable-multicast-miss +# Enable experimental multicast notification of cachemisses. + +# FATAL: Makefile: order must be PORTNAME/PORTVERSION/DISTVERSIONPREFIX/DISTVERSION/DISTVERSIONSUFFIX/PORTREVISION/PORTEPOCH/CATEGORIES/MASTER_SITES/MASTER_SITE_SUBDIR/PKGNAMEPREFIX/PKGNAMESUFFIX/DISTNAME/EXTRACT_SUFX/DISTFILES/DIST_SUBDIR/EXTRACT_ONLY. + +PORTNAME= cacheboy +DISTVERSION= 0.PRE1 +PORTREVISION= 1 +CATEGORIES= www +MASTER_SITES= http://cacheboy.googlecode.com/files/ +MASTER_SITE_SUBDIR= / +DISTNAME= CACHEBOY_0.PRE1 +# EXTRACT_SUFX= .tar.gz +DIST_SUBDIR= CACHEBOY_0.PRE1 + +MAINTAINER= adrian@freebsd.org +COMMENT= HTTP Caching Proxy (Squid Derivative) + +CONFLICTS= squid-[0-9]* +GNU_CONFIGURE= yes +USE_PERL5= yes +USE_RC_SUBR= squid + +SQUID_UID?= squid +SQUID_GID?= squid + +MAN8= cachemgr.cgi.8 squid.8 +docs= QUICKSTART README.Squid doc/debug-sections.txt +PORTDOCS= ${docs:T} +PORTEXAMPLES= passwd.sql +SUB_FILES+= pkg-deinstall pkg-install pkg-message +SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} + +OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ + SQUID_SASL_AUTH "Install SASL authentication helpers" off \ + SQUID_DELAY_POOLS "Enable delay pools" off \ + SQUID_SNMP "Enable SNMP support" off \ + SQUID_CARP "Enable CARP support" on \ + SQUID_SSL "Enable SSL support for reverse proxies" off \ + SQUID_PINGER "Install the icmp helper" off \ + SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ + SQUID_HTCP "Enable HTCP support" off \ + SQUID_VIA_DB "Enable forward/via database" off \ + SQUID_CACHE_DIGESTS "Enable cache digests" off \ + SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ + SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \ + SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ + SQUID_IDENT "Enable ident (RFC 931) lookups" on \ + SQUID_REFERER_LOG "Enable Referer-header logging" off \ + SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ + SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ + SQUID_PF "Enable transparent proxying with PF" off \ + SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ + SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ + SQUID_AUFS "Enable the aufs storage scheme" off \ + SQUID_COSS "Enable the COSS storage scheme" off \ + SQUID_KQUEUE "Use kqueue(2) instead of poll(2)" on \ + SQUID_LARGEFILE "Support log and cache files >2GB" off \ + SQUID_STACKTRACES "Create backtraces on fatal errors" off + +etc_files= squid/cachemgr.conf.default \ + squid/mib.txt squid/mime.conf.default \ + squid/msntauth.conf.default squid/squid.conf.default + +icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ + anthony-box2.gif anthony-c.gif anthony-compressed.gif \ + anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ + anthony-f.gif anthony-image.gif anthony-image2.gif \ + anthony-layout.gif anthony-link.gif anthony-movie.gif \ + anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ + anthony-quill.gif anthony-script.gif anthony-sound.gif \ + anthony-tar.gif anthony-tex.gif anthony-text.gif \ + anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif + +error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ + ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ + ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ + ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ + ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ + ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ + ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \ + ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ + ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ + ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ + ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT + +libexec= cachemgr.cgi digest_pw_auth diskd-daemon \ + ip_user_check \ + msnt_auth ncsa_auth ntlm_auth \ + pam_auth smb_auth smb_auth.sh squid_db_auth squid_session \ + squid_unix_group wbinfo_group.pl +.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" +libexec+= unlinkd +.endif + +sbin= RunCache squidclient squid + +CONFIGURE_ARGS= --bindir=${PREFIX}/sbin \ + --sbindir=${PREFIX}/sbin \ + --datadir=${PREFIX}/etc/squid \ + --libexecdir=${PREFIX}/libexec/squid \ + --localstatedir=${PREFIX}/squid \ + --sysconfdir=${PREFIX}/etc/squid \ + --enable-removal-policies="lru heap" \ + --disable-linux-netfilter \ + --disable-linux-tproxy \ + --disable-epoll + +.include <bsd.port.pre.mk> + +# Authentication methods and modules: + +basic_auth= DB NCSA PAM MSNT SMB +digest_auth= password +external_acl= ip_user session unix_group wbinfo_group +MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \ + squid_unix_group.8 +.if defined(WITH_SQUID_LDAP_AUTH) +USE_OPENLDAP= yes +CFLAGS+= -I${LOCALBASE}/include +LDFLAGS+= -L${LOCALBASE}/lib +MAN8+= squid_ldap_auth.8 squid_ldap_group.8 +basic_auth+= LDAP +digest_auth+= ldap +external_acl+= ldap_group +libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group +.endif +.if defined(WITH_SQUID_SASL_AUTH) +LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2 +CFLAGS+= -I${LOCALBASE}/include +CPPFLAGS+= -I${LOCALBASE}/include +LDFLAGS+= -L${LOCALBASE}/lib +basic_auth+= SASL +libexec+= sasl_auth +.endif +.if !defined(NO_NIS) && !defined(WITHOUT_NIS) +basic_auth+= YP +libexec+= yp_auth +.endif +CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ + --enable-basic-auth-helpers="${basic_auth}" \ + --enable-digest-auth-helpers="${digest_auth}" \ + --enable-external-acl-helpers="${external_acl}" \ + --enable-ntlm-auth-helpers="SMB" +.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS) +# XXX This currently only works with heimdal from the base system, +# see files/patch-helpers_negotiate_auth-squid_kerb_auth_* +CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" +libexec+= squid_kerb_auth +.endif + +# Storage schemes: + +storage_schemes= ufs diskd null +.if defined(WITH_SQUID_AUFS) +storage_schemes+= aufs +.if ${OSVERSION}>=501000 +# Only document libmap.conf where it is available: +EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs +.endif +# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS +CONFIGURE_ARGS+= --with-pthreads +CFLAGS+= ${PTHREAD_CFLAGS} +.endif +.if defined(WITH_SQUID_COSS) +storage_schemes+= coss +.if !defined(WITH_SQUID_AUFS) +# use Posix AIO instead of aufs' AIO; note that you then need the kernel to +# supply AIO support, either by loading the aio(4) module (n/a on 4.x) or by +# adding the option VFS_AIO to your kernel configuration if you want to +# actually use COSS storage: +CONFIGURE_ARGS+= --enable-coss-aio-ops +.endif +sbin+= cossdump +.endif +CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" + +# Other options set via 'make config': + +.if defined(WITH_SQUID_DELAY_POOLS) +CONFIGURE_ARGS+= --enable-delay-pools +.endif +.if defined(WITH_SQUID_SNMP) +CONFIGURE_ARGS+= --enable-snmp +.endif +.if defined(WITHOUT_SQUID_CARP) +CONFIGURE_ARGS+= --disable-carp +.endif +.if defined(WITH_SQUID_SSL) +# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only +# works when it is defined before bsd.port{.pre}.mk is .included. +# This makes it currently impossible to combine this macro with OPTIONS to +# conditionally include OpenSSL support. +.include "${PORTSDIR}/Mk/bsd.openssl.mk" +CONFIGURE_ARGS+= --enable-ssl \ + --with-openssl="${OPENSSLBASE}" +CFLAGS+= -I${OPENSSLINC} +LDFLAGS+= -L${OPENSSLLIB} +.endif +.if defined(WITH_SQUID_PINGER) +CONFIGURE_ARGS+= --enable-icmp +libexec+= pinger +.endif +.if defined(WITH_SQUID_DNS_HELPER) +CONFIGURE_ARGS+= --disable-internal-dns +libexec+= dnsserver +.endif +.if defined(WITH_SQUID_HTCP) +CONFIGURE_ARGS+= --enable-htcp +.endif +.if defined(WITH_SQUID_VIA_DB) +CONFIGURE_ARGS+= --enable-forw-via-db +.endif +.if defined(WITH_SQUID_CACHE_DIGESTS) +CONFIGURE_ARGS+= --enable-cache-digests +.endif +.if defined(WITHOUT_SQUID_WCCP) +CONFIGURE_ARGS+= --disable-wccp +.endif +.if defined(WITH_SQUID_WCCPV2) +CONFIGURE_ARGS+= --enable-wccpv2 +.endif +.if defined(WITH_SQUID_STRICT_HTTP) +CONFIGURE_ARGS+= --disable-http-violations +.endif +.if defined(WITHOUT_SQUID_IDENT) +CONFIGURE_ARGS+= --disable-ident-lookups +.endif +.if defined(WITH_SQUID_REFERER_LOG) +CONFIGURE_ARGS+= --enable-referer-log +.endif +.if defined(WITH_SQUID_USERAGENT_LOG) +CONFIGURE_ARGS+= --enable-useragent-log +.endif +.if defined(WITH_SQUID_ARP_ACL) +CONFIGURE_ARGS+= --enable-arp-acl +.endif +.if defined(WITH_SQUID_PF) +CONFIGURE_ARGS+= --enable-pf-transparent +.if ${OSVERSION} < 502106 +IGNORE= pf available only in FreeBSD 5.3 and newer +.endif +.endif +# IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE, +# they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to +# 2003-06-27 (OSVERSION < 501101). +# +# Please see PR misc/44148 and the CVS log of src/include/Makefile for further +# information. +.if defined(WITH_SQUID_IPFILTER) +.if (${OSVERSION} > 500032 && ${OSVERSION} < 501101) +IGNORE= the IPFilter headers are not part of the base system +.else +CONFIGURE_ARGS+= --enable-ipf-transparent +.endif +.endif +.if defined(WITH_SQUID_FOLLOW_XFF) +CONFIGURE_ARGS+= --enable-follow-x-forwarded-for +.endif +.if defined(WITHOUT_SQUID_KQUEUE) +CONFIGURE_ARGS+= --disable-kqueue +.endif +.if defined(WITH_SQUID_LARGEFILE) +CONFIGURE_ARGS+= --with-large-files --enable-large-cache-files +.endif +.if defined(WITH_SQUID_STACKTRACES) +CONFIGURE_ARGS+= --enable-stacktraces +CFLAGS+= -g +STRIP= +.endif + +# Languages: +# +# If you do not define SQUID_LANGUAGES yourself, all available language files +# will be installed; the default language will be English. + +SQUID_LANGUAGES?= Armenian Azerbaijani Bulgarian Catalan Czech Danish \ + Dutch English Estonian Finnish French German Greek \ + Hebrew Hungarian Italian Japanese Korean Lithuanian \ + Polish Portuguese Romanian Russian-1251 Russian-koi8-r \ + Serbian Simplify_Chinese Slovak Spanish Swedish \ + Traditional_Chinese Turkish +SQUID_DEFAULT_LANG?= English +CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ + --enable-default-err-language=${SQUID_DEFAULT_LANG} + +# Finally, add additional user specified configuration options: +CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} + +CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ + CPPFLAGS="${CPPFLAGS}"\ + LDFLAGS="${LDFLAGS}" + +PLIST_DIRS= etc/squid/icons libexec/squid +PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ + ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} + +.for d in ${SQUID_LANGUAGES} +PLIST_DIRS+= etc/squid/errors/${d} +PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} +.endfor +PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid + +post-patch: + @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' \ + ${WRKSRC}/configure + @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ + -e 's|%%SQUID_GID%%|${SQUID_GID}|g' \ + -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/src/cf.data.pre + @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ + ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ + ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh + +pre-install: +# Prevent installation of .orig files by deleting them. + @${FIND} ${WRKSRC} -name '*.bak' -delete + @${FIND} ${WRKSRC} -name '*.orig' -delete + +pre-su-install: + @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ + ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL + +post-install: +.if !defined(NOPORTEXAMPLES) + @${MKDIR} ${EXAMPLESDIR} + ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} +.endif +.if defined(WITH_SQUID_PINGER) + ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ + ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger +.endif +.if !defined(NOPORTDOCS) + @${MKDIR} ${DOCSDIR} + cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} +.endif + @${SETENV} PKG_PREFIX=${PREFIX} \ + ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL + + @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" + @${ECHO_CMD} "" + @${CAT} ${PKGMESSAGE} + @${ECHO_CMD} "" + +.include <bsd.port.post.mk> |