7 files changed, 130 insertions, 50 deletions
diff --git a/www/zope/Makefile b/www/zope/Makefile
index 1b6f5d23f8fa..17fdff1d597f 100644
--- a/www/zope/Makefile
+++ b/www/zope/Makefile
@@ -7,6 +7,7 @@
 
 PORTNAME=	zope
 PORTVERSION=	2.7.0
+PORTREVISION=	1
 CATEGORIES=	www python zope
 MASTER_SITES=	http://www.zope.org/Products/Zope/${PORTVERSION}/${PORTVERSION}/
 DISTNAME=	Zope-${PORTVERSION}
@@ -18,25 +19,27 @@ COMMENT=	An object-based web application platform
 BUILD_DEPENDS+=	${LOCALBASE}/lib/${PYTHON_VERSION}/site-packages/_xmlplus/sax/expatreader.py:${PORTSDIR}/textproc/py-xml
 
 USE_PYTHON=	yes
+USE_RC_SUBR=	yes
 DIST_SUBDIR=	zope
 
 # Note: the notes that follow reflect the decisions of prior maintainers
 # of this port. IOW, don't blame me if you don't like the way it's done.
 # Exceptions to this are marked as such.
 
-# Build has to be done in the final location after installing the sources
-# there. It was a major action to fix all paths otherwise.
-
 # Change these, if you like, via the environment.
+ZOPE_USER?=		www
 WEBBASEDIR?=		www
 SZOPEBASEDIR?=		${WEBBASEDIR}/Zope
-SCGIBINDIR?=		${WEBBASEDIR}/cgi-bin
-SAPACHE_CONFDIR?=	etc/apache
-ZOPE_USER?=		www
 
 # Do not change anything below this line.
 
-ZOPEBASEDIR=	${PREFIX}/${SZOPEBASEDIR}
+.if defined(INSTANCENAME)
+ZOPEINSTANCENAME=	${INSTANCENAME}
+.endif
+
+ZOPEBASEDIR=		${PREFIX}/${SZOPEBASEDIR}
+ZOPEINSTANCEBASE?=	${PREFIX}/${SZOPEBASEDIR}
+ZOPEINSTANCEDIR?=	${ZOPEINSTANCEBASE}/${ZOPEINSTANCENAME}
 
 HAS_CONFIGURE=	yes
 CONFIGURE_ARGS=	--prefix=${ZOPEBASEDIR}
@@ -46,6 +49,11 @@ ALL_TARGET=	build
 MAKEFILE=	makefile
 
 PLIST_SUB=	ZOPEBASEDIR=${SZOPEBASEDIR}
+RC_SCRIPTS_SUB=	PREFIX=${PREFIX} \
+		RC_SUBR=${RC_SUBR}
+CONFIG_SUB=	ZOPEBASEDIR=${ZOPEBASEDIR} \
+		ZOPE_USER=${ZOPE_USER} \
+		ZOPEINSTANCEDIR=${ZOPEINSTANCEDIR}
 
 .if defined(BATCH)
 ISBATCH=	-u admin:test123
@@ -54,17 +62,20 @@ ISBATCH=	""
 .endif
 
 post-install:
-	@${MV} ${PREFIX}/${SZOPEBASEDIR}/skel/etc/zope.conf.in ${PREFIX}/${SZOPEBASEDIR}/skel/etc/zope.conf.sample.in
-	@${SED} -e "s|%%ZOPEBASEDIR%%|${ZOPEBASEDIR}|g" < pkg-message
+	@${MV} ${ZOPEBASEDIR}/skel/etc/zope.conf.in ${ZOPEBASEDIR}/skel/etc/zope.conf.sample.in
+	@${SED} ${CONFIG_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} pkg-message
+	@${SED} ${RC_SCRIPTS_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} \
+		${FILESDIR}/zope.sh > ${PREFIX}/etc/rc.d/zope.sh
+	@${CHMOD} ${BINMODE} ${PREFIX}/etc/rc.d/zope.sh
+	@${MKDIR} ${ZOPEBASEDIR}/Products
 
 instance:
-	@${PREFIX}/${SZOPEBASEDIR}/bin/mkzopeinstance.py -d ${ZOPEBASEDIR} ${ISBATCH}
-	@${CAT} ${FILESDIR}/zope.conf_changes | \
-		${SED} "s/@@@ZOPE_USER@@@/${ZOPE_USER}/g" | \
-		${PATCH} ${ZOPEBASEDIR}/etc/zope.conf.sample
-	@${RM} ${ZOPEBASEDIR}/etc/zope.conf.sample.orig
-	@${CHOWN} ${ZOPE_USER} ${ZOPEBASEDIR}/var
-	@${CHOWN} ${ZOPE_USER} ${ZOPEBASEDIR}/log
-	@${SED} -e "s|%%ZOPEBASEDIR%%|${ZOPEBASEDIR}|g"  < ${FILESDIR}/zope.sh.in > ${PREFIX}/etc/rc.d/zope.sh.sample
+	@${ZOPEBASEDIR}/bin/mkzopeinstance.py -d ${ZOPEINSTANCEDIR} ${ISBATCH}
+	@${SED} ${CONFIG_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${FILESDIR}/zope.conf_changes | \
+		${PATCH} ${ZOPEINSTANCEDIR}/etc/zope.conf.sample
+	@${RM} ${ZOPEINSTANCEDIR}/etc/zope.conf.sample.orig
+	@${CHOWN} ${ZOPE_USER} ${ZOPEINSTANCEDIR}/var
+	@${CHOWN} ${ZOPE_USER} ${ZOPEINSTANCEDIR}/log
+	@${SED} ${CONFIG_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${FILESDIR}/instance_message
 
 .include <bsd.port.mk>
diff --git a/www/zope/files/instance_message b/www/zope/files/instance_message
new file mode 100644
index 000000000000..2521235227d8
--- /dev/null
+++ b/www/zope/files/instance_message
@@ -0,0 +1,14 @@
+**********************************************************************
+
+Zope instance successfully installed 
+
+If Zope should get started automatically when the system starts, 
+please add the following lines to /etc/rc.conf
+
+zope_enable="YES"
+zope_instances="%%ZOPEINSTANCEDIR%%" 
+
+If there is already a zope_instances entry please add 
+%%ZOPEINSTANCEDIR%% separated by a space. 
+
+
diff --git a/www/zope/files/zope.conf_changes b/www/zope/files/zope.conf_changes
index a7f67e1c18aa..ba227775266c 100644
--- a/www/zope/files/zope.conf_changes
+++ b/www/zope/files/zope.conf_changes
@@ -1,10 +1,20 @@
---- zope.conf.sample.orig	Mon Nov  3 11:04:10 2003
-+++ zope.conf.sample	Mon Nov  3 11:04:50 2003
-@@ -137,6 +137,7 @@
+--- work/Zope-2.7.0/skel/etc/zope.conf.in	Fri Jan  9 00:34:08 2004
++++ /data/infosys/zope/etc/zope.conf	Wed Apr 14 09:36:46 2004
+@@ -78,7 +78,8 @@
+ #
+ # Example:
+ #
+-#    products /home/chrism/projects/myproducts
++products %%ZOPEBASEDIR%%/Products
++products $INSTANCE/Products
+ 
+ 
+ # Directive: environment
+@@ -137,6 +138,7 @@
  # Example:
  #
  #    effective-user chrism
-+effective-user @@@ZOPE_USER@@@
++effective-user %%ZOPE_USER%%
  
  
  # Directive: enable-product-installation
diff --git a/www/zope/files/zope.sh b/www/zope/files/zope.sh
new file mode 100644
index 000000000000..e8d89804cc59
--- /dev/null
+++ b/www/zope/files/zope.sh
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Start or stop zope
+# $FreeBSD: /tmp/pcvs/ports/www/zope/files/Attic/zope.sh,v 1.1 2004-04-20 14:18:32 perky Exp $
+
+# PROVIDE: zope
+# REQUIRE: DAEMON
+# BEFORE: LOGIN
+# KEYWORD: FreeBSD shutdown
+#
+prefix=%%PREFIX%%
+
+# Define these zope_* variables in one of these files:
+#       /etc/rc.conf
+#       /etc/rc.conf.local
+#       /etc/rc.conf.d/gkrellmd
+#
+# DO NOT CHANGE THESE DEFAULT VALUES HERE
+#
+zope_enable=${zope_enable:-"NO"}        # Enable gkrellmd
+zope_instances=${zope_instances:-""}    # List of instancehome dirs 
+
+. %%RC_SUBR%%
+
+name="zope"
+rcvar=`set_rcvar`
+load_rc_config $name
+
+if checkyesno zope_enable; then
+
+	case "$1" in
+		start)
+			echo "Starting Zope"
+		;;
+		stop)
+			echo "Stopping Zope"
+		;;
+		restart)
+			echo "Restarting Zope"
+		;;
+		*)
+			echo "Unknown aktion \"$1\""
+		;;
+	esac
+
+	for instance in $zope_instances
+	do
+		if [ -r ${instance}/etc/${name}.conf -a -x ${instance}/bin/zopectl ]; then
+			echo -n "       Instance ${instance} -> "
+			${instance}/bin/zopectl $1                           
+		fi
+	done
+fi
diff --git a/www/zope/files/zope.sh.in b/www/zope/files/zope.sh.in
deleted file mode 100644
index 727778464e0e..000000000000
--- a/www/zope/files/zope.sh.in
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-
-case "$1" in
-start)
-	umask 077
-	%%ZOPEBASEDIR%%/bin/zopectl --daemon start > /dev/null 2>&1
-	echo -n " Zope"
-	;;
-stop)
-	%%ZOPEBASEDIR%%/bin/zopectl stop > /dev/null 2>&1
-	echo -n " Zope"
-	;;
-restart)
-	%%ZOPEBASEDIR%%/bin/zopectl restart > /dev/null 2>&1
-	echo -n " Zope"
-	;;
-*)
-	echo "Usage: `basename $0` {start|stop}" >&2
-	;;
-esac
-
-exit 0
diff --git a/www/zope/pkg-message b/www/zope/pkg-message
index 0d0be67a8e4c..5712bfdfeae5 100644
--- a/www/zope/pkg-message
+++ b/www/zope/pkg-message
@@ -2,16 +2,27 @@
 
 Zope 2.7 Successfull installed.
 
-To create an instance of Zope please run
-
+To create an instance of Zope please run 
 make instance
 
-to create an instance in %%ZOPEBASEDIR%%. To create an instance in a
-diffrent location run
+You can set the following Variables in /etc/make.conf 
 
-make instance ZOPEBASEDIR=<instance_home>
+ZOPEINSTANCEBASE	Directory where Zope instance should go
+			(default: %%ZOPEBASEDIR%%)
+ZOPEINSTANCENAME	Default name for a new Zope instance 
+			(default: none)
 
-Files installed by make instance will NOT be deleted when Zope is
-deinstalled. You have to delete them yourself
+If you want have multiple Zope you should run 
+make instance INSTANCENAME=<somename>
 
 **********************************************************************
+****** ATTENTION ***** ATTENTION ***** ATTENTION ***** ATTENTION *****
+
+The default installation directory for Zope Products has changed from 
+%%ZOPEBASEDIR%%/lib/python/Products 
+to %%ZOPEBASEDIR%%/Products. 
+
+You migth have to add the following lines to your zope.conf 
+products %%ZOPEBASEDIR%%/Products
+products $INSTANCE/Products
+
diff --git a/www/zope/pkg-plist b/www/zope/pkg-plist
index eda07eb114ea..a36497f6074a 100644
--- a/www/zope/pkg-plist
+++ b/www/zope/pkg-plist
@@ -1,7 +1,9 @@
+etc/rc.d/zope.sh
 %%ZOPEBASEDIR%%/bin/README.txt
 %%ZOPEBASEDIR%%/bin/check_catalog.py
 %%ZOPEBASEDIR%%/bin/compilezpy.py
 %%ZOPEBASEDIR%%/bin/copyzopeskel.py
+@exec rm -f %%ZOPEBASEDIR%%/bin/copyzopeskel.pyc
 %%ZOPEBASEDIR%%/bin/decompilezpy.py
 %%ZOPEBASEDIR%%/bin/load_site.py
 %%ZOPEBASEDIR%%/bin/mkzeoinstance.py
@@ -3043,6 +3045,7 @@
 @dirrm %%ZOPEBASEDIR%%/lib/python/AccessControl
 @dirrm %%ZOPEBASEDIR%%/lib/python
 @dirrm %%ZOPEBASEDIR%%/lib
+@dirrm %%ZOPEBASEDIR%%/Products
 @dirrm %%ZOPEBASEDIR%%/import
 @dirrm %%ZOPEBASEDIR%%/doc/zconfig
 @dirrm %%ZOPEBASEDIR%%/doc/changenotes