diff options
Diffstat (limited to 'www')
| -rw-r--r-- | www/Makefile | 1 | ||||
| -rw-r--r-- | www/squid31/Makefile | 473 | ||||
| -rw-r--r-- | www/squid31/distinfo | 2 | ||||
| -rw-r--r-- | www/squid31/files/extra-patch-src-cf.data.pre.aufs | 20 | ||||
| -rw-r--r-- | www/squid31/files/patch-src-cf.data.pre | 13 | ||||
| -rw-r--r-- | www/squid31/files/pkg-deinstall.in | 48 | ||||
| -rw-r--r-- | www/squid31/files/pkg-install.in | 102 | ||||
| -rw-r--r-- | www/squid31/files/pkg-message.in | 33 | ||||
| -rw-r--r-- | www/squid31/files/squid.in | 101 | ||||
| -rw-r--r-- | www/squid31/pkg-descr | 10 |
10 files changed, 0 insertions, 803 deletions
diff --git a/www/Makefile b/www/Makefile index 4c4722dd72a3..f59f12a4e459 100644 --- a/www/Makefile +++ b/www/Makefile @@ -1828,7 +1828,6 @@ SUBDIR += spreadlogd SUBDIR += sqstat SUBDIR += squid - SUBDIR += squid31 SUBDIR += squid32 SUBDIR += squid33 SUBDIR += squid_radius_auth diff --git a/www/squid31/Makefile b/www/squid31/Makefile deleted file mode 100644 index 88ec0c4b8357..000000000000 --- a/www/squid31/Makefile +++ /dev/null @@ -1,473 +0,0 @@ -# Created by: Adrian Chadd <adrian@FreeBSD.org> -# $FreeBSD$ -# -# Tunables not (yet) configurable via 'make config': -# SQUID_{U,G}ID -# Which user/group Squid should run as (default: squid/squid). -# The user and group will be created if they do not already exist using -# a uid:gid of 100:100. -# NOTE: older versions of Squid defaulted to nobody/nogroup. -# If you wish to run Squid as "nobody" (which is not recommended), please -# define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment -# before you start the update or installation of this port. -# -# Note: -# Starting with Squid 3.1 SQUID_LANGUAGES and SQUID_DEFAULT_LANG are no longer -# available and will be ignored. -# -# SQUID_CONFIGURE_ARGS -# Additional configuration options. -# -# To enable them, use e.g -# `make SQUID_CONFIGURE_ARGS="--enable-ntml-fail-open" install' -# -# The list below may be incomplete, please see the configure script -# in the Squid source distribution for the complete list of additional -# options. -# Note that you probably do not need to worry about these options in most -# cases, they are included in case you want to experiment with them. -# -# --enable-xmalloc-statistics -# Show malloc statistics in status page -# --enable-cachemgr-hostname=some.hostname -# Make cachemgr.cgi default to this host -# --disable-unlinkd -# Do not use "unlinkd" -# --with-aufs-threads=N_THREADS -# Tune the number of worker threads for the aufs object -# --with-filedescriptors=N -# Force Squid to use N filedescriptors. -# --enable-ntlm-fail-open -# Enable NTLM fail open, where a helper that fails one of the -# Authentication steps can allow Squid to still authenticate the user -# --enable-x-accelerator-vary -# Enable support for the X-Accelerator-Vary HTTP header. Can be used -# to indicate variance within an accelerator setup. Typically used -# together with other code that adds custom HTTP headers to the -# requests. - -PORTNAME= squid -PORTVERSION= 3.1.${SQUID_STABLE_VER} -CATEGORIES= www ipv6 -MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ - http://mirrors.ccs.neu.edu/Squid/ \ - ftp://ftp.fu-berlin.de/unix/www/squid/squid/ \ - ftp://ftp.nl.uu.net/pub/unix/www/squid/ \ - ftp://ftp.solnet.ch/mirror/squid/ \ - ftp://ftp.ntua.gr/pub/www/Squid/squid/ \ - http://mirror.aarnet.edu.au/pub/squid/squid/ \ - ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid,} \ - http://www.squid-cache.org/Versions/v3/3.1/ \ - http://www3.us.squid-cache.org/Versions/v3/3.1/ \ - http://www1.at.squid-cache.org/Versions/v3/3.1/ \ - http://www2.de.squid-cache.org/Versions/v3/3.1/ \ - http://www.eu.squid-cache.org/Versions/v3/3.1/ \ - http://www1.ie.squid-cache.org/Versions/v3/3.1/ \ - http://www1.jp.squid-cache.org/Versions/v3/3.1/ \ - http://www1.za.squid-cache.org/Versions/v3/3.1/ -MASTER_SITE_SUBDIR= squid -DIST_SUBDIR= squid3.1 - -PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \ - http://www2.us.squid-cache.org/%SUBDIR%/ \ - http://www1.at.squid-cache.org/%SUBDIR%/ \ - http://www2.de.squid-cache.org/%SUBDIR%/ \ - http://www.eu.squid-cache.org/%SUBDIR%/ \ - http://www1.ie.squid-cache.org/%SUBDIR%/ \ - http://www1.jp.squid-cache.org/%SUBDIR%/ \ - http://www2.tw.squid-cache.org/%SUBDIR%/ -PATCH_SITE_SUBDIR= Versions/v3/3.1/changesets -PATCHFILES= - -MAINTAINER= tmseck@FreeBSD.org -COMMENT= HTTP Caching Proxy - -LICENSE= GPLv2 -LICENSE_FILE= ${WRKSRC}/COPYING - -LATEST_LINK= squid31 - -DEPRECATED= Squid 3.1 is no longer recommended for new installations. Please use www/squid32 instead -EXPIRATION_DATE= 2013-03-31 - -SQUID_STABLE_VER= 23 - -CONFLICTS_INSTALL= squid-2.[0-9].* squid-3.[^1].* cacheboy-[0-9]* lusca-head-[0-9]* -GNU_CONFIGURE= yes -USE_BZIP2= yes -USE_PERL5= yes -USE_RC_SUBR= squid - -SQUID_UID?= squid -SQUID_GID?= squid - -MAN1= squidclient.1 -MAN8= cachemgr.cgi.8 squid.8 squid_radius_auth.8 -docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt -PORTDOCS= ${docs:T} -PORTEXAMPLES= * -SUB_FILES+= pkg-deinstall pkg-install pkg-message -SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} - -OPTIONS= SQUID_KERB_AUTH "Install Kerberos authentication helpers" on \ - SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ - SQUID_NIS_AUTH "Install NIS/YP authentication helpers" on \ - SQUID_SASL_AUTH "Install SASL authentication helpers" off \ - SQUID_IPV6 "Enable IPv6 support" on \ - SQUID_DELAY_POOLS "Enable delay pools" off \ - SQUID_SNMP "Enable SNMP support" on \ - SQUID_SSL "Enable SSL support for reverse proxies" off \ - SQUID_SSL_CRTD "Enable SSL certificate daemon" off \ - SQUID_PINGER "Install the icmp helper" off \ - SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ - SQUID_HTCP "Enable HTCP support" on \ - SQUID_VIA_DB "Enable forward/via database" off \ - SQUID_CACHE_DIGESTS "Enable cache digests" off \ - SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ - SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \ - SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ - SQUID_IDENT "Enable ident (RFC 931) lookups" on \ - SQUID_REFERER_LOG "Enable Referer-header logging" off \ - SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ - SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ - SQUID_IPFW "Enable transparent proxying with IPFW" off \ - SQUID_PF "Enable transparent proxying with PF" off \ - SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ - SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ - SQUID_ICAP "Enable ICAP client functionality" off \ - SQUID_ESI "Enable ESI support (experimental)" off \ - SQUID_AUFS "Enable the aufs storage scheme" on \ - SQUID_COSS "Enable COSS (currently not available)" off \ - SQUID_KQUEUE "Use kqueue(2) (experimental)" on \ - SQUID_LARGEFILE "Support log and cache files >2GB" off \ - SQUID_STACKTRACES "Create backtraces on fatal errors" off \ - SQUID_DEBUG "Enable debugging options" off - -etc_files= squid/cachemgr.conf.default \ - squid/errorpage.css.default \ - squid/mib.txt \ - squid/mime.conf.default \ - squid/msntauth.conf.default \ - squid/squid.conf.default \ - squid/squid.conf.documented - -icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ - anthony-box2.gif anthony-c.gif anthony-compressed.gif \ - anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ - anthony-f.gif anthony-image.gif anthony-image2.gif \ - anthony-layout.gif anthony-link.gif anthony-movie.gif \ - anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ - anthony-quill.gif anthony-script.gif anthony-sound.gif \ - anthony-tar.gif anthony-tex.gif anthony-text.gif \ - anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif - -error_files= ERR_ACCESS_DENIED ERR_ACL_TIME_QUOTA_EXCEEDED \ - ERR_AGENT_CONFIGURE ERR_AGENT_WPAD \ - ERR_CACHE_ACCESS_DENIED \ - ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ - ERR_CONNECT_FAIL ERR_DIR_LISTING ERR_DNS_FAIL \ - ERR_ESI ERR_FORWARDING_DENIED \ - ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ - ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ - ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ - ERR_GATEWAY_FAILURE \ - ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \ - ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \ - ERR_ONLY_IF_CACHED_MISS ERR_PRECONDITION_FAILED \ - ERR_READ_ERROR ERR_READ_TIMEOUT \ - ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \ - ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \ - ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT \ - error-details.txt - -error_dirs= af ar az bg ca cs da de el en es et fa fi fr he hu hy id it \ - ja ko lt lv ms nl oc pl pt pt-br ro ru sk sl sr-cyrl sr-latn \ - sv \ - th tr uk uz \ - vi zh-cn zh-tw \ - templates - -error_dir_links= ar-ae ar-bh ar-dz ar-eg ar-iq ar-jo ar-kw ar-lb \ - ar-ly ar-ma ar-om ar-qa ar-sa ar-sy ar-tn ar-ye \ - az-az bg-bg cs-cz da-dk \ - de-at de-ch de-de de-li de-lu \ - el-gr \ - en-au en-bz en-ca en-gb en-ie en-in en-jm en-nz \ - en-ph en-sg en-tt en-uk en-us en-za en-zw \ - es-ar es-bo es-cl es-co es-cr es-do es-ec es-es \ - es-gt es-hn es-mx es-ni es-pa es-pe es-pr es-py \ - es-sv es-uy es-ve \ - et-ee \ - fa-fa fa-ir fi-fi \ - fr-be fr-ca fr-ch fr-fr fr-lu fr-mc \ - he-il hu-hu hy-am hy-armn id-id it-ch it-it \ - ja-jp ko-kp ko-kr lt-lt lv-lv ms-my nl-nl \ - pl-pl pt-pt ro-md ro-ro ru-ru \ - sk-sk sl-si sr sr-latn-cs sr-sp sv-fi sv-se \ - th-th tr-tr uk-ua vi-vn zh-hk zh-mo zh-sg - -libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \ - msnt_auth ncsa_auth ntlm_smb_lm_auth pam_auth smb_auth \ - smb_auth.sh squid_db_auth squid_radius_auth squid_session \ - squid_unix_group wbinfo_group.pl -.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" -libexec+= unlinkd -.endif - -sbin= squidclient squid - -CONFIGURE_ARGS= --with-default-user=${SQUID_UID} \ - --bindir=${PREFIX}/sbin \ - --sbindir=${PREFIX}/sbin \ - --datadir=${ETCDIR} \ - --libexecdir=${PREFIX}/libexec/squid \ - --localstatedir=/var/squid \ - --sysconfdir=${ETCDIR} \ - --with-logdir=/var/log/squid \ - --with-pidfile=/var/run/squid/squid.pid \ - --enable-removal-policies="lru heap" \ - --disable-linux-netfilter \ - --disable-linux-tproxy \ - --disable-epoll \ - --disable-translation \ - --disable-ecap \ - --disable-loadable-modules - -.include <bsd.port.pre.mk> - -# Authentication methods and modules: - -basic_auth= DB NCSA PAM MSNT SMB squid_radius_auth -digest_auth= password -external_acl= ip_user session unix_group wbinfo_group -MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \ - squid_unix_group.8 -.if defined(WITH_SQUID_LDAP_AUTH) -USE_OPENLDAP= yes -CFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -MAN8+= squid_ldap_auth.8 squid_ldap_group.8 -basic_auth+= LDAP -digest_auth+= ldap -external_acl+= ldap_group -libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group -.endif -.if defined(WITH_SQUID_SASL_AUTH) -LIB_DEPENDS+= sasl2:${PORTSDIR}/security/cyrus-sasl2 -CFLAGS+= -I${LOCALBASE}/include -CPPFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -basic_auth+= SASL -libexec+= sasl_auth -.endif -# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too: -.if defined(WITH_SQUID_NIS_AUTH) && !defined(NO_NIS) && !defined(WITHOUT_NIS) -basic_auth+= YP -libexec+= yp_auth -.endif -CONFIGURE_ARGS+= --enable-auth="basic digest negotiate ntlm" \ - --enable-basic-auth-helpers="${basic_auth}" \ - --enable-digest-auth-helpers="${digest_auth}" \ - --enable-external-acl-helpers="${external_acl}" \ - --enable-ntlm-auth-helpers="smb_lm" -# POLA: allow the old global make.conf(5) (pre src.conf(5)) defines, too: -.if defined(WITH_SQUID_KERB_AUTH) && !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS) -CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" -libexec+= negotiate_kerb_auth negotiate_kerb_auth_test \ - squid_kerb_auth squid_kerb_auth_test -.endif - -# Storage schemes: - -storage_schemes= ufs diskd -# TODO: should AIO be optional as well? -diskio_modules= AIO Blocking DiskDaemon -.if defined(WITH_SQUID_AUFS) -storage_schemes+= aufs -diskio_modules+= DiskThreads -# Only document switching from libpthread to libthr using libmap.conf -# where lipthread is the default threading library: -.if ${OSVERSION} < 700041 -EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs -.endif -# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS, -# e.g. SQUID_CONFIGURE_ARGS=--with-aufs-threads=N -.else -CONFIGURE_ARGS+= --without-pthreads -.endif -.if defined(WITH_SQUID_COSS) -# COSS is currently disabled in Squid-3 until fixes from the 2.x series are -# backported to 3.x. -#storage_schemes+= coss -.endif -CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" -CONFIGURE_ARGS+= --enable-disk-io="${diskio_modules}" - -# Other options set via 'make config': - -.if defined(WITHOUT_SQUID_IPV6) || defined(WITHOUT_IPV6) -CONFIGURE_ARGS+= --disable-ipv6 -.endif -.if defined(WITH_SQUID_DELAY_POOLS) -CONFIGURE_ARGS+= --enable-delay-pools -.endif -.if defined(WITHOUT_SQUID_SNMP) -CONFIGURE_ARGS+= --disable-snmp -.endif -.if defined(WITH_SQUID_SSL) -# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only -# works when it is defined before bsd.port{.pre}.mk is .included. -# This makes it currently impossible to combine this macro with OPTIONS to -# conditionally include OpenSSL support. -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -CONFIGURE_ARGS+= --enable-ssl \ - --with-openssl="${OPENSSLBASE}" -CFLAGS+= -I${OPENSSLINC} -LDFLAGS+= -L${OPENSSLLIB} -.endif -.if defined(WITH_SQUID_SSL_CRTD) -CONFIGURE_ARGS+= --enable-ssl-crtd -libexec+= ssl_crtd -.endif -.if defined(WITH_SQUID_PINGER) -CONFIGURE_ARGS+= --enable-icmp -libexec+= pinger -.endif -.if defined(WITH_SQUID_DNS_HELPER) -CONFIGURE_ARGS+= --disable-internal-dns -libexec+= dnsserver -.endif -.if defined(WITHOUT_SQUID_HTCP) -CONFIGURE_ARGS+= --disable-htcp -.endif -.if defined(WITH_SQUID_VIA_DB) -CONFIGURE_ARGS+= --enable-forw-via-db -.endif -.if defined(WITH_SQUID_CACHE_DIGESTS) -CONFIGURE_ARGS+= --enable-cache-digests -.endif -.if defined(WITHOUT_SQUID_WCCP) -CONFIGURE_ARGS+= --disable-wccp -.endif -.if defined(WITH_SQUID_WCCPV2) -CONFIGURE_ARGS+= --enable-wccpv2 -.endif -.if defined(WITH_SQUID_STRICT_HTTP) -CONFIGURE_ARGS+= --disable-http-violations -.endif -.if defined(WITHOUT_SQUID_IDENT) -CONFIGURE_ARGS+= --disable-ident-lookups -.endif -.if defined(WITH_SQUID_REFERER_LOG) -CONFIGURE_ARGS+= --enable-referer-log -.endif -.if defined(WITH_SQUID_USERAGENT_LOG) -CONFIGURE_ARGS+= --enable-useragent-log -.endif -.if defined(WITH_SQUID_ARP_ACL) -CONFIGURE_ARGS+= --enable-arp-acl -.endif -.if defined(WITH_SQUID_IPFW) -CONFIGURE_ARGS+= --enable-ipfw-transparent -.endif -.if defined(WITH_SQUID_PF) -CONFIGURE_ARGS+= --enable-pf-transparent -.endif -.if defined(WITH_SQUID_IPFILTER) -CONFIGURE_ARGS+= --enable-ipf-transparent -.endif -.if defined(WITH_SQUID_FOLLOW_XFF) -CONFIGURE_ARGS+= --enable-follow-x-forwarded-for -.endif -.if defined(WITH_SQUID_ICAP) -CONFIGURE_ARGS+= --enable-icap-client -.endif -.if defined(WITH_SQUID_ESI) -CONFIGURE_ARGS+= --enable-esi -LIB_DEPENDS+= expat:${PORTSDIR}/textproc/expat2 \ - xml2:${PORTSDIR}/textproc/libxml2 -CFLAGS+= -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2 -LDFLAGS+= -L${LOCALBASE}/lib -.endif -.if defined(WITHOUT_SQUID_KQUEUE) -# Squid-3's kqueue support is still marked as experimental, so it is not yet -# enabled automatically as in Squid-2. We are explicit about disabling it, -# nonetheless: -CONFIGURE_ARGS+= --disable-kqueue -.else -CONFIGURE_ARGS+= --enable-kqueue -.endif -.if defined(WITH_SQUID_LARGEFILE) -CONFIGURE_ARGS+= --with-large-files -.endif -.if defined(WITH_SQUID_STACKTRACES) -CONFIGURE_ARGS+= --enable-stacktraces -CFLAGS+= -g -STRIP= -.endif -.if defined(WITH_SQUID_DEBUG) || defined(WITH_DEBUG) -# TODO: are there other useful options that can/should be set to help -# the developers in debugging failures? -CONFIGURE_ARGS+= --disable-optimizations -WITH_DEBUG?= yes -.endif - -# Finally, add additional user specified configuration options: -CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} - -PLIST_DIRS= %%ETCDIR%%/icons libexec/squid -PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,%%ETCDIR%%/icons/,} \ - ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} - -PLIST_FILES+= %%ETCDIR%%/errors/COPYRIGHT %%ETCDIR%%/errors/TRANSLATORS -.for d in ${error_dirs} -PLIST_DIRS+= %%ETCDIR%%/errors/${d} -PLIST_FILES+= ${error_files:S,^,%%ETCDIR%%/errors/${d}/,} -.endfor -PLIST_FILES+= ${error_dir_links:S,^,%%ETCDIR%%/errors/,} -PLIST_DIRS+= %%ETCDIR%%/errors -PLIST_DIRSTRY+= %%ETCDIR%% - -post-patch: - @${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \ - ${WRKSRC}/src/cf.data.pre - @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ - ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ - ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh - -pre-install: -# Prevent installation of .orig files by deleting them. - @${FIND} ${WRKSRC} -name '*.bak' -delete - @${FIND} ${WRKSRC} -name '*.orig' -delete - -pre-su-install: - @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL - -post-install: -.if !defined(NOPORTEXAMPLES) - @${MKDIR} ${EXAMPLESDIR} - ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} -.endif -.if defined(WITH_SQUID_PINGER) - ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ - ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger -.endif -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCSDIR} - cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} -.endif - @${SETENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL - - @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" - @${ECHO_CMD} "" - @${CAT} ${PKGMESSAGE} - @${ECHO_CMD} "" -.if defined(WITH_SQUID_COSS) - @${ECHO_CMD} "Note: COSS support is currently not available in Squid-3." - @${ECHO_CMD} "Please check your squid.conf and comment out any 'cache_dir coss' definitions." - @${ECHO_CMD} "" -.endif - -.include <bsd.port.post.mk> diff --git a/www/squid31/distinfo b/www/squid31/distinfo deleted file mode 100644 index ef87bb3d27f1..000000000000 --- a/www/squid31/distinfo +++ /dev/null @@ -1,2 +0,0 @@ -SHA256 (squid3.1/squid-3.1.23.tar.bz2) = ba8041d23ef168dee755ca0d343c28b117011f02abfabbf3a7b623f21ef0e48d -SIZE (squid3.1/squid-3.1.23.tar.bz2) = 2560454 diff --git a/www/squid31/files/extra-patch-src-cf.data.pre.aufs b/www/squid31/files/extra-patch-src-cf.data.pre.aufs deleted file mode 100644 index 019fdcac0fc7..000000000000 --- a/www/squid31/files/extra-patch-src-cf.data.pre.aufs +++ /dev/null @@ -1,20 +0,0 @@ ---- src/cf.data.pre.orig Wed Nov 1 15:12:02 2006 -+++ src/cf.data.pre Wed Nov 1 15:12:17 2006 -@@ -1097,6 +1100,17 @@ - - see argument descriptions under ufs above - -+ Note: -+ By default, FreeBSD uses the pthread(3) M:N threading library. -+ You can, however, map the thread library to the 1:1 libthr(3) -+ implementation by inserting the following lines into -+ /etc/libmap.conf and see whether this performs better on your -+ system: -+ -+ [%%PREFIX%%/sbin/squid] -+ libpthread.so.1 libthr.so.1 -+ libpthread.so.2 libthr.so.2 -+ - The diskd store type: - - "diskd" uses the same storage format as "ufs", utilizing a diff --git a/www/squid31/files/patch-src-cf.data.pre b/www/squid31/files/patch-src-cf.data.pre deleted file mode 100644 index b2b4e55db81f..000000000000 --- a/www/squid31/files/patch-src-cf.data.pre +++ /dev/null @@ -1,13 +0,0 @@ ---- src/cf.data.pre.orig Sun Jun 24 13:42:25 2007 -+++ src/cf.data.pre Sun Jun 24 13:59:32 2007 -@@ -1417,6 +1417,10 @@ - LOC: Config.pidFilename - DOC_START - A filename to write the process-id to. To disable, enter "none". -+ -+ Note: If you change this setting, you need to set squid_pidfile -+ in /etc/rc.conf to reflect the new value. Please see -+ %%PREFIX%%/etc/rc.d/squid for details. - DOC_END - - diff --git a/www/squid31/files/pkg-deinstall.in b/www/squid31/files/pkg-deinstall.in deleted file mode 100644 index f78c66c178bd..000000000000 --- a/www/squid31/files/pkg-deinstall.in +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -# -# $FreeBSD$ -# - -PATH=/bin:/usr/bin:/usr/sbin -squid_base="/var/squid" -squid_cachedir="${squid_base}/cache" -squid_confdir=${PKG_PREFIX}/etc/squid -squid_logdir="/var/log/squid" -squid_rundir="/var/run/squid" - -case $2 in -DEINSTALL) - cd ${squid_confdir} || exit 1 - for f in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do - cmp -s -z ${f} ${f}.default && rm ${f} - done - # try to cleanup directories in /var: - for d in ${squid_cachedir} ${squid_base} ${squid_logdir} ${squid_rundir}; do - rmdir ${d} 2>/dev/null - done - ;; -POST-DEINSTALL) - echo "===> post-deinstallation information for $1:" - echo "" - echo " Note:" - echo " Squid related user accounts and groups were not removed." - echo "" - echo " To remove the '%%SQUID_UID%%' user and the '%%SQUID_GID%%' group which were" - echo " created by a default installation of this package, run" - echo "" - echo " pw userdel -n %%SQUID_UID%% -u 100" - if [ -d ${squid_base} -o -d ${squid_confdir} -o -d ${squid_logdir} -o -d ${squid_rundir} ] ; then - echo "" - echo " In order to ease updates the cache and log directories" - echo " and all configuration files modified by you were preserved." - echo "" - echo " Please remove them manually if you do not want to use" - echo " Squid any longer." - fi - echo "" - ;; -*) - exit 64 - ;; -esac -exit 0 diff --git a/www/squid31/files/pkg-install.in b/www/squid31/files/pkg-install.in deleted file mode 100644 index 2ab8d99dc70f..000000000000 --- a/www/squid31/files/pkg-install.in +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/sh -# -# $FreeBSD$ -# - -PATH=/bin:/usr/bin:/usr/sbin -pkgname=$1 -squid_base="/var/squid" -squid_cachedir="${squid_base}/cache" -squid_confdir="${PKG_PREFIX:-%%PREFIX%%}/etc/squid" -squid_logdir="/var/log/squid" -squid_rundir="/var/run/squid" -if [ -x /usr/sbin/nologin ]; then - nologin=/usr/sbin/nologin -else - nologin=/sbin/nologin -fi -squid_user="%%SQUID_UID%%" -squid_group="%%SQUID_GID%%" -squid_gid=100 -squid_uid=100 -case $2 in -PRE-INSTALL) - echo "===> Pre-installation configuration for ${pkgname}" - if ! pw groupshow ${squid_group} -q >/dev/null ; then - echo "There is no group '${squid_group}' on this system, so I will try to create it (using group id ${squid_gid}):" - if ! pw groupadd ${squid_group} -g ${squid_gid} -q ; then - echo "Failed to create group \"${squid_group}\"!" >&2 - echo "Please create it manually." >&2 - exit 1 - else - echo "Group '${squid_group}' created successfully:" - fi - else - echo "I will use the existing group '${squid_group}':" - fi - pw groupshow ${squid_group} - - if ! pw usershow ${squid_user} -q >/dev/null ; then - echo "There is no account '${squid_user}' on this system, so I will try to create it (using user id ${squid_uid}):" - if ! pw useradd -q -n ${squid_user} \ - -u ${squid_uid} -g ${squid_group} \ - -c "Squid caching-proxy pseudo user" \ - -d "${squid_base}" -s "${nologin}" \ - -h - ; then - echo "Failed to create user '${squid_user}'!" >&2 - echo "Please create it manually." >&2 - exit 1 - else - echo "User '${squid_user}' created successfully:" - fi - else - echo "I will use the existing user '${squid_user}':" - fi - pw usershow ${squid_user} - # Since we usually start the Squid master process as ${squid_user} - # instead of root make sure that ${squid_base} is writable for it. - if [ ! -d ${squid_base} ]; then - echo "Creating ${squid_base}..." - install -d -o root -g ${squid_group} \ - -m 0775 ${squid_base} - else - chgrp ${squid_group} ${squid_base} - chmod g+w ${squid_base} - fi - if [ ! -d ${squid_cachedir} ]; then - echo "Creating ${squid_cachedir} ..." - install -d -o ${squid_user} -g ${squid_group} \ - -m 0750 ${squid_cachedir} - fi - if [ ! -d ${squid_confdir} ]; then - echo "Creating ${squid_confdir}..." - install -d -o root -g ${squid_group} \ - -m 0755 ${squid_confdir} - fi - if [ ! -d ${squid_logdir} ]; then - echo "Creating ${squid_logdir}..." - install -d -o ${squid_user} -g ${squid_group} \ - -m 0750 ${squid_logdir} - fi - if [ ! -d ${squid_rundir} ]; then - echo "Creating ${squid_rundir}..." - install -d -o ${squid_user} -g ${squid_group} \ - -m 0755 ${squid_rundir} - fi - ;; -POST-INSTALL) - for file in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do - if [ ! -f ${squid_confdir}/${file} \ - -a -f ${squid_confdir}/${file}.default ]; then - echo "Creating ${file} from default..." - install -c -o root -g ${squid_group} -m 0640 \ - ${squid_confdir}/${file}.default \ - ${squid_confdir}/${file} - fi - done - ;; -*) - exit 64 - ;; -esac -exit 0 diff --git a/www/squid31/files/pkg-message.in b/www/squid31/files/pkg-message.in deleted file mode 100644 index 82f59cb52d77..000000000000 --- a/www/squid31/files/pkg-message.in +++ /dev/null @@ -1,33 +0,0 @@ - o You can find the configuration files for this package in the - directory %%PREFIX%%/etc/squid. - - o The default cache directory is /var/squid/. - The default log directory is /var/log/squid/. - - Note: - You must initialize new cache directories before you can start - squid. Do this by running "squid -z" as 'root' or '%%SQUID_UID%%'. - If your cache directories are already initialized (e.g. after an - upgrade of squid) you do not need to initialize them again. - - o The default configuration will deny everyone but the local host and - local networks as defined in RFC 1918 for IPv4 and RFCs 4193 and - 4291 for IPv6 access to the proxy service. Edit the "http_access - allow/deny" directives in %%PREFIX%%/etc/squid/squid.conf - to suit your needs. - - To enable Squid, set squid_enable=yes in either - /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/squid - Please see %%PREFIX%%/etc/rc.d/squid for further details. - - Note: - If you just updated your Squid installation from an earlier version, - make sure to check your Squid configuration against the 3.1 default - configuration file %%PREFIX%%/etc/squid/squid.conf.default. - - %%PREFIX%%/etc/squid/squid.conf.documented is a fully annotated - configuration file you can consult for further reference. - - Additionally, you should check your configuration by calling - 'squid -f /path/to/squid.conf -k parse' before starting Squid. - diff --git a/www/squid31/files/squid.in b/www/squid31/files/squid.in deleted file mode 100644 index 67f2008b0712..000000000000 --- a/www/squid31/files/squid.in +++ /dev/null @@ -1,101 +0,0 @@ -#!/bin/sh -# -# $FreeBSD$ -# -# PROVIDE: squid -# REQUIRE: LOGIN -# KEYWORD: shutdown -# -# Note: -# Set "squid_enable=yes" in either /etc/rc.conf, /etc/rc.conf.local or -# /etc/rc.conf.d/squid to activate Squid. -# -# Additional variables you can define in one of these files: -# -# squid_chdir: the directory into which the rc system moves into before -# starting Squid. Default: /var/squid -# -# squid_conf: The configuration file that Squid should use. -# Default: %%PREFIX%%/etc/squid/squid.conf -# -# squid_fib: The alternative routing table id that Squid should use. -# Default: none -# See setfib(1) for further details. Note that the setfib(2) -# system call is not available in FreeBSD versions prior to 7.1. -# -# squid_user: The user id that should be used to run the Squid master -# process. Default: %%SQUID_UID%%. -# Note that you probably need to define "squid_user=root" if -# you want to run Squid in reverse proxy setups or if you want -# Squid to listen on a "privileged" port < 1024. -# -# squid_pidfile: -# The name (including the full path) of the Squid -# master process' PID file. -# Default: /var/run/squid/squid.pid. -# You only need to change this if you changed the -# corresponding entry in your Squid configuration. -# -# squid_flags: Additional commandline arguments for Squid you might want to -# use. See squid(8) for further details. -# - -squid_checkrunning() { - ${command} ${command_args} ${squid_flags} -k check 2>/dev/null -} - -squid_setfib() { - if command -v check_namevarlist > /dev/null 2>&1; then - check_namevarlist fib && return 0 - fi - - ${SYSCTL} net.fibs >/dev/null 2>&1 || return 0 - - squid_fib=${squid_fib:-"NONE"} - if [ "x${squid_fib}" != "xNONE" ]; then - command="setfib -F ${squid_fib} ${command}" - else - return 0 - fi -} - -squid_stop() { - echo "Stopping ${name}." - ${command} ${command_args} ${squid_flags} -k shutdown - run_rc_command poll -} - -. /etc/rc.subr - -name=squid -rcvar=squid_enable - -command=%%PREFIX%%/sbin/squid -extra_commands=reload -reload_cmd="${command} ${command_args} ${squid_flags} -k reconfigure" -start_precmd="squid_setfib" -stop_precmd="squid_checkrunning" -stop_cmd="squid_stop" - -load_rc_config ${name} - -squid_chdir=${squid_chdir:-"/var/squid"} -squid_conf=${squid_conf:-"%%PREFIX%%/etc/squid/squid.conf"} -squid_enable=${squid_enable:-"NO"} -squid_pidfile=${squid_pidfile:-"/var/run/squid/squid.pid"} -squid_user=${squid_user:-%%SQUID_UID%%} - -pidfile=${squid_pidfile} -required_dirs=${squid_chdir} - -# squid(8) will not start if ${squid_conf} is not present so try -# to catch that beforehand via ${required_files} rather than make -# squid(8) crash. - -required_files=${squid_conf} - -# Now make sure that we invoke squid with "-f ${squid_conf}": - -command_args="-f ${squid_conf}" - -run_rc_command "$1" diff --git a/www/squid31/pkg-descr b/www/squid31/pkg-descr deleted file mode 100644 index 0cd02912d960..000000000000 --- a/www/squid31/pkg-descr +++ /dev/null @@ -1,10 +0,0 @@ -Squid is a high-performance proxy caching server for web clients, -supporting FTP, gopher, and HTTP data objects. Unlike traditional -caching software, Squid handles all requests in a single, non-blocking, -I/O-driven process. - -Squid supports SSL, extensive access controls, and full request logging. -By using the lightweight Internet Cache Protocol, Squid caches can be -arranged in a hierarchy or mesh for additional bandwidth savings. - -WWW: http://www.squid-cache.org/ |