aboutsummaryrefslogtreecommitdiffstats
path: root/cad
Commit message (Expand)AuthorAgeFilesLines
* - Update to 3.404garga2014-06-287-9/+103
* - Update from 9.04 to 9.05danilo2014-06-273-11/+11
* Convert GMAKE to MAKE_CMDbapt2014-06-251-1/+1
* Use MAKE_CMD to set MAKE in MAKE_ENVbapt2014-06-251-1/+1
* Use MAKE_CMD instead of GMAKEbapt2014-06-251-1/+1
* Properly use the frameworkbapt2014-06-251-3/+3
* Properly call MAKE_CMDbapt2014-06-251-6/+4
* Properly use MAKE_CMDbapt2014-06-251-1/+1
* - Update from 3.8.63 to 3.8.65danilo2014-06-252-3/+3
* cad/kicad-devel: Unbreak build on DragonFlymarino2014-06-241-1/+1
* - Removed license, because the situation is complex.stephen2014-06-231-2/+0
* - Put the NO_CDROM option in the correct place.stephen2014-06-221-2/+2
* - Slightly reword the NO_CDROM option.stephen2014-06-221-2/+2
* - Add NO_CDROM if tetgen or metis options are set.stephen2014-06-221-0/+2
* - Unbreakgahr2014-06-114-7/+50
* Remove all the bootstrap files (.bs) from the plists.mat2014-06-101-2/+0
* Remove indefinite articles and trailing periods from COMMENT, plusolgeni2014-06-0915-15/+15
* Remove all space characters from Makefile assignments.olgeni2014-06-093-17/+17
* Update to 3.3.60zeising2014-06-075-12/+11
* Mark BROKEN: Fails to configureantoine2014-06-071-0/+2
* - Update from 3.8.61 to 3.8.63danilo2014-06-062-3/+3
* - Update from 9.7.85 to 9.7.87danilo2014-06-062-3/+3
* Update to r4913.mr2014-06-055-11/+36
* Silent re-roll of files. I cannot check the difference exactly, butmaho2014-06-052-13/+11
* Update to version 3.5.1.mr2014-06-033-1044/+2447
* Add two forgotten patchfiles.mr2014-06-032-0/+16
* Try to avoid bzr leftovers.mr2014-06-032-34/+30
* Maintainer can no longer maintain these portsantoine2014-06-031-1/+1
* - USE_(BZIP2|XZ) -> USES=tar:(bzip2|xz)ohauer2014-06-014-9/+6
* - add stage supportohauer2014-06-011-4/+3
* - add stage supportohauer2014-06-012-26/+33
* - Update from 3.8.60 to 3.8.61danilo2014-05-312-3/+3
* - Update from 9.7.84 to 9.7.85danilo2014-05-312-3/+3
* - Update from 9.7.83 to 9.7.84danilo2014-05-302-3/+3
* - Update from 3.8.59 to 3.8.60danilo2014-05-282-3/+3
* - Update from 3.8.58 to 3.8.59danilo2014-05-282-3/+3
* - Update from 9.7.82 to 9.7.83danilo2014-05-282-3/+3
* Update to 20140316.hrs2014-05-274-53/+40
* Add some missing bits.thierry2014-05-272-3/+28
* - Remove useless gmake entrymiwi2014-05-261-1/+0
* - Fix MASTER_SITESgahr2014-05-261-1/+2
* Convert to USES=dos2unixbapt2014-05-262-4/+4
* Multiple ports: reset maintainerseadler2014-05-262-2/+2
* Fix USESmr2014-05-241-2/+1
* Update to r4886 and stagify.mr2014-05-246-803/+1795
* Fix build on a box where gcc does not exist.hrs2014-05-222-2/+12
* Stagifymr2014-05-221-4/+3
* - Support STAGEDIRak2014-05-201-7/+4
* - Update to 0.24.4nivit2014-05-193-12/+11
* - Update from 3.7.57 to 3.8.58danilo2014-05-192-5/+5
* - Change pkg-plist, add missingnemysis2014-05-181-0/+1
* These ports are no longer used or cared for.nemysis2014-05-176-31/+62
* There is no xlocale in 8.4.thierry2014-05-161-3/+3
* Fix plist for i386.thierry2014-05-161-1/+1
* - Stagify;thierry2014-05-112-37/+50
* Chase the upgrade of kicad in CONFLICTS.thierry2014-05-111-1/+1
* Support stagebapt2014-05-092-3/+2
* Support stagebapt2014-05-092-17/+9
* The tarball was rerolled 2 days ago, with several minor modifications,thierry2014-05-082-2/+3
* - Update from 3.7.56 to 3.7.57danilo2014-05-072-3/+3
* Chase OpenCascade's upgrade.thierry2014-05-072-2/+2
* Upgrade to 6.7.1.thierry2014-05-0719-865/+29116
* Convert archivers/libzip to USES=libtool. Bump PORTREVISION on alltijl2014-05-062-36/+10
* The KDE on FreeBSD team presents Qt 4.8.6.rakuco2014-05-061-0/+7
* Convert all :U to :tu and :L to :tlbapt2014-05-053-4/+4
* It seems that FreeBSD-9.2 does'nt like 'std::__1'...thierry2014-05-0419-40/+40
* I forgot to remove MAKE_JOB_UNSAFE in my previous commit.thierry2014-05-031-1/+0
* Remove cad/kicad-library: it is no more provided separately but includedthierry2014-05-036-484/+0
* Upgrade Kicad to the latest stable (2013-05-18).thierry2014-05-0325-341/+3277
* - Stageswills2014-04-271-8/+7
* Replace all @unexec /bin/rmdir with @unexec rmdirmat2014-04-251-3/+3
* - Upgrade cgnslib to 3.2.1thierry2014-04-181-1/+1
* The FreeBSD x11@ and graphics team proudly presentszeising2014-04-177-4/+7
* Remove expired ports:rene2014-04-1132-1144/+0
* Mark as broken unstaged perl portsbapt2014-04-091-0/+1
* cad/librecad:makc2014-03-313-5/+6
* - Update to 20140100 and undeprecaterene2014-03-309-189/+117
* Mark broken: checksum and size mismatchantoine2014-03-291-0/+2
* - Add staging supportpawel2014-03-241-20/+13
* Switch to wx 2.8bapt2014-03-241-4/+3
* Switch to wx 2.8bapt2014-03-241-2/+2
* - Update from 3.7.55 to 3.7.56danilo2014-03-212-3/+3
* Upgrade Code_Aster to 11.5.0-4.thierry2014-03-196-66/+42
* Now that the default version of GCC in the Ports Collection (pergerald2014-03-171-1/+1
* - Stage supportriggs2014-03-163-738/+720
* - Update to 0.23.3.hrs2014-03-146-33/+83
* - Convert USE_GMAKE to USESmiwi2014-03-135-6/+5
* Update the default version of GCC used in the Ports Collection fromgerald2014-03-1110-9/+10
* - Use INSTALL_PROGRAM instead of INSTALL_SCRIPTnemysis2014-03-101-2/+1
* Update to version 3.4.6mr2014-03-093-3/+634
* Deprecate a few unmaintained ports (leaf ports, non staged and unmaintained s...antoine2014-03-091-0/+2
* Unbreakantoine2014-03-081-1/+1
* Convert c* to USES=zipbapt2014-03-076-10/+6
* Support stagebapt2014-03-071-32/+11
* Convert to dos2unixbapt2014-03-071-2/+2
* - Update to 0.80.2, Announce message:nemysis2014-03-073-29/+34
* BrickUtils is a simple utility for builders that use LEGO Digital Designernemysis2014-03-068-0/+249
* - Update to 201302, Announce message:nemysis2014-03-062-4/+5
* Update cad/calculix to version 2.7maho2014-03-047-233/+75
* Support stagingehaupt2014-02-271-6/+4
* Remove trailing whitespaces from category cadehaupt2014-02-217-7/+7
* - Support staging [1]pawel2014-02-181-26/+12
* Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most casestijl2014-02-178-13/+34
* Support stagingehaupt2014-02-161-6/+3
* Support stagingehaupt2014-02-161-19/+9
* Mark broken: Does not compileantoine2014-02-131-0/+2
* According to the Porter's Handbook (5.12.2.3.) default options must be added toehaupt2014-02-107-0/+15
* - Stage supportmiwi2014-02-091-4/+3
* - Update to 2.8.4.stephen2014-02-093-5/+4
* - Support stagingehaupt2014-02-091-6/+5
* cad/varkon:makc2014-02-083-17/+16
* Update to version 26pawel2014-02-083-3/+4
* Deprecate ports unmaintained for which distillator is not able to find public...bapt2014-02-081-0/+3
* Chase boost and icu bumpbapt2014-02-072-2/+2
* cad/z88: Explicitly link libm (taken from dports)marino2014-02-061-3/+4
* Upgrade to version 3.4.5mr2014-02-023-1170/+1727
* - Remove cad/mars -- does not build, no releases in the past 20 yearsgahr2014-01-3139-2142/+0
* - Convert to USES=tkgahr2014-01-292-20/+14
* - Convert to USES=tkgahr2014-01-291-1/+1
* - Convert to USES=tkgahr2014-01-281-7/+4
* - Convert to USES=gmake tk desktop-file-utilsgahr2014-01-282-15/+23
* - Convert to USES=gmake tkgahr2014-01-281-5/+2
* - Keep category Makefiles sortedamdmi32014-01-281-1/+1
* - Style and typo fixesdecke2014-01-282-40/+38
* - Implement staging.stephen2014-01-272-9/+3
* Add a missing plistantoine2014-01-262-0/+37
* Remove expired ports:rene2014-01-24154-8452/+0
* Fix properties on pkg-plistbapt2014-01-223-3/+0
* Stage supportantoine2014-01-212-18/+13
* Stage supportantoine2014-01-211-4/+2
* Stage supportantoine2014-01-211-2/+1
* - Stage supportantoine2014-01-212-37/+23
* Stage supportantoine2014-01-211-2/+1
* Stage supportantoine2014-01-211-4/+2
* Stage supportantoine2014-01-211-4/+4
* Reduce over inclusion of bsd.port.mkbapt2014-01-161-7/+6
* Reduce over inclusion of bsd.port.mkbapt2014-01-161-7/+4
* Reduce over inclusion of bsd.port.mkbapt2014-01-161-3/+1
* Python cleanup:rene2014-01-142-2/+2
* Support stagebapt2014-01-091-55/+7
* Support stagebapt2014-01-092-11/+6
* Fix build with gcc47mat2014-01-083-19/+33
* Deprecate and schedule for removal on 2014-01-22, depends on expiredrene2014-01-0611-0/+33
* Switch back to using WITH_EXAMPLES. The logic in this port isadamw2014-01-041-1/+1
* Convert cad to MDOCS and MEXAMPLESadamw2014-01-0310-19/+34
* Part 1 at removing now useless FETCH_ARGS redifitionbapt2014-01-031-1/+0
* Stage supportantoine2013-12-312-3/+1
* - Stage supportantoine2013-12-311-2/+1
* Stage supportantoine2013-12-311-16/+15
* - Stage supportantoine2013-12-312-5/+3
* Stage supportantoine2013-12-312-3/+1
* Stage supportantoine2013-12-311-2/+1
* - Stage supportantoine2013-12-312-4/+3
* - Stage supportantoine2013-12-312-4/+2
* - Stage supportantoine2013-12-311-3/+1
* Stage supportantoine2013-12-311-2/+1
* Stage supportantoine2013-12-312-6/+3
* Stage supportantoine2013-12-311-4/+3
* - convert to stagedb2013-12-303-7/+7
* cad/pdnmesh: Restore previous commit erased by r337036marino2013-12-271-0/+1
* Fix LIB_DEPENDSantoine2013-12-241-3/+3
* - Use options framework.tijl2013-12-215-249/+285
* Bump PORTREVISION for all the dependency changes in the previous commit.tijl2013-12-211-1/+1
* - Remove excessive dependencies and fix dependency on gtkglext.tijl2013-12-212-33/+14
* Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]zeising2013-12-162-1/+2
* - Update from 3.7.54 to 3.7.55danilo2013-12-152-3/+3
* Update to version 2.3.0pawel2013-12-142-8/+4
* Fix typobapt2013-12-131-1/+1
* Convert LIB_DEPENDS for ports depending on boostbapt2013-12-121-14/+14
* In preparation for making libtool generate libraries with a sane name, fix allbapt2013-12-1121-64/+64
* - Update devel/tbb to 4.2.2martymac2013-12-111-0/+1
* - Update to 2.0.0rc3makc2013-12-116-123/+144
* Update to 0.9.7.zeising2013-12-113-6/+6
* - Fix build, adjust stagingnemysis2013-12-103-17/+9
* - Respect CMAKE_BUILD_TYPEmakc2013-12-052-19/+2
* Register conflicts with texlive-base-* since it has one file in common.mr2013-12-021-0/+2
* - Update from 2.3.0a4 to 2.3.2a3danilo2013-11-302-3/+3
* - Update to version 4.2pawel2013-11-234-21/+20
* Use gcc for now.mr2013-11-221-0/+3
* - Convert to USES=qmake (and other USES while I'm here)makc2013-11-225-56/+39
* Deprecated ports broken for more than 6 monthbapt2013-11-223-0/+9
* - Remove now needless qmake_build from USE_QT4makc2013-11-211-2/+2
* - Update to 7.5.233gahr2013-11-193-14/+18
* - USES dos2unix instead of USE_DOS2UNIXnemysis2013-11-191-2/+2
* - Add USE_DOS2UNIXnemysis2013-11-192-21/+37
* cad/feappv: Fix CFLAGS supportmarino2013-11-181-0/+13
* - Add a patches sent upstream and adjust the build flags to build withrakuco2013-11-185-164/+734
* Update qcad to 3.4.2.0mr2013-11-066-40/+169
* Welcome CMake 2.8.12!rakuco2013-11-062-0/+97
* cad/geda: update to 1.8.2wg2013-11-023-27/+39
* - Update from 2.2.0b3 to 2.3.0a4danilo2013-11-023-28/+19
* - Update to version 2.6.1pawel2013-11-024-41/+103
* The 0.3 version brings more electrical elements, more translations,vg2013-11-015-188/+2252
* - Fix run-time segmentation fault [1]gahr2013-11-0113-41/+128
* Update to libmpc version 1.0.1 which brings the following fixes:gerald2013-10-2617-11/+17
* Avoid to download the boost library during the build.mr2013-10-245-11/+66
* Try to fix build on current.mr2013-10-231-0/+10
* - Remove manual creation and removal of share/applications, as it's now in th...amdmi32013-10-2216-18/+1
* - Update from 3.7.52 to 3.7.54danilo2013-10-222-3/+3
* Update to 2.2.5antoine2013-10-152-19/+24
* Update to 3.3.3.0mr2013-10-124-127/+369
* Apply fixes provided by Maxmr2013-10-101-26/+21
* Try to fix the build.mr2013-10-101-11/+10
* - Convert to USES= qmakemakc2013-10-091-11/+8
* cad/varkon: Hardcode PLATFORM to "FreeBSD"marino2013-10-071-2/+2
* - Change maintainer email to @FreeBSD.orgdanilo2013-10-063-27/+23
* Removed dependency on gwavebapt2013-10-051-9/+3
* Remove the EOLed x11-toolkits/guile-gtk (gnome1) and its latest userbapt2013-10-057-159/+0
* The FreeBSD graphics/x11 team proudly presentszeising2013-09-302-1/+2
* - Update to 2.8.3.stephen2013-09-284-31/+22
* - Fix on CURRENT [1]gahr2013-09-273-7/+23
* - Update from 3.7.51 to 3.7.52danilo2013-09-263-29/+17
* - Update from 9.7.81 to 9.7.82danilo2013-09-253-11/+8
* - Remove NO_STAGE as these have been tested to be safebdrewery2013-09-253-3/+0
* - Remove cad/tkgate: it segfaults on startup, and has been doing so for as longgahr2013-09-2521-2802/+0
* - Convert to USES+=tkgahr2013-09-231-2/+2
* Add NO_STAGE all over the place in preparation for the staging support (cat: ...bapt2013-09-20103-205/+145
* - Remove last vestiges of MAKE_JOBS_SAFE knobak2013-09-201-2/+0
* - Unbreak on CURRENT by adding USE_GCC= yesgahr2013-09-181-0/+1
* Fix plistmr2013-09-182-2/+2
* Update to a newer snapshot.mr2013-09-185-141/+810
* - Update to 0.80.1nemysis2013-09-185-67/+50
* - Update to 201301nemysis2013-09-183-11/+60
* Convert to new perl frameworkbapt2013-09-171-5/+2
* - Set make_jobs_unsafe.stephen2013-09-161-0/+2
* - convert to the new perl5 frameworkaz2013-09-131-2/+2
* Add explicit dependency on pkgconf (11 ports)marino2013-09-121-5/+2
* Add GLU to the build dependenciesmr2013-09-111-0/+1
* cad/ldraw: Mark BROKEN, checksum mismatchmarino2013-09-101-0/+1
* - convert to the new perl5 frameworkaz2013-09-101-6/+3
* - Use single space after WWW:sunpoet2013-09-081-1/+1
* cad/freehdl: fix build with clangwg2013-09-066-1/+92
* cad/irsim: update to 9.7.81wg2013-09-062-18/+14
* Add an explicit dependency on pkgconfbapt2013-09-051-2/+1
* Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.bsam2013-09-051-1/+1
* cad/repsnapper: update to 2.2.0b3wg2013-09-042-4/+4
* Add two more dependencies.mr2013-09-041-2/+2
* Add an explicit dependency on pkgconfbapt2013-09-032-7/+3
* Add an explicit dependency on pkgconfbapt2013-09-032-5/+3
* Add an explicit dependency on pkgconfbapt2013-09-032-11/+4
* Add an explicit dependency on pkgconfbapt2013-09-031-1/+1
* Add an explicit dependency on pkgconfbapt2013-09-031-1/+1
* Add an explicit dependency on pkgconfbapt2013-09-031-2/+1
* Fix a hidden USE_GNOME=pkgconfigbapt2013-09-031-9/+3
* cad/repsnapper: update to 2.2.0b2wg2013-09-022-24/+23
* Add an explicit dependency on pkgconfigbapt2013-09-021-1/+1
* Add moc to the dependencies to fix the build.mr2013-08-291-1/+1
* Now metis-edf is selectable.maho2013-08-271-1/+11
* - Update to version from 12 August 2013danfe2013-08-253-27/+19
* Readd qcad and upgrade to version 3.2.1mr2013-08-2117-0/+10303