aboutsummaryrefslogtreecommitdiffstats
path: root/cad
Commit message (Expand)AuthorAgeFilesLines
* Update to 10.2zeising2017-10-253-17/+6
* Update to 3.3.86zeising2017-10-246-19/+19
* multimedia/ffmpeg: update to 3.4jbeich2017-10-211-1/+1
* cad/solvespace: update to 2.3swills2017-10-173-6/+5
* Fix CONFLICTS.thierry2017-10-151-1/+1
* Re-add the new website.thierry2017-10-141-0/+2
* Remove dead WWW linksbapt2017-10-131-3/+0
* Mark as broken: no public distfilesbapt2017-10-133-0/+3
* Convert to test frameworksunpoet2017-10-121-3/+0
* Update to 3.13.3.rakuco2017-10-092-5/+4
* - Update cad/freecad to 0.17.12018madpilot2017-10-086-46/+148
* Register net/fsbclient and cad/alliance conflict.cy2017-10-051-0/+2
* Bump PORTREVISION in ports depending on archivers/libzip.rakuco2017-09-281-1/+1
* devel/boost-*: update to 1.65.1jbeich2017-09-257-7/+7
* devel/boost-*: enable C++11 featuresjbeich2017-09-257-8/+7
* Reset maintainership on Dominic Fandrey's ports.adamw2017-09-241-1/+1
* Cleanup after removal of libexecinfo from ports.mat2017-09-221-1/+1
* Remove USES=execinfo.mat2017-09-222-2/+2
* Upgrade to v4.0.7.thierry2017-09-193-1736/+3854
* cad/gmsh: Update to version 3.0.5jrm2017-09-183-13/+11
* Update tbb to 2018 and bump dependent ports' revisionsmartymac2017-09-171-1/+1
* Chase Emacs updateashish2017-09-122-2/+2
* Bump PORTREVISION for ports depending on the canonical version of GCCgerald2017-09-1127-18/+27
* cad/openvsp: update to 3.13.2cpm2017-09-062-5/+4
* cad/openvsp: fix build on CURRENTcpm2017-09-062-4/+186
* Fix plist with WITH_DEBUG=yesthierry2017-09-061-1/+1
* Update to 3.2.0sunpoet2017-09-021-1/+2
* - Update WWWamdmi32017-08-311-1/+1
* cad/stepcode: Fix portlint issuespi2017-08-303-6/+17
* Bump PORTREVISION to reflect print/gl2ps changes.araujo2017-08-241-0/+1
* Don't set WRKSRC when USE_GITHUB. Use the correct GH_ACCOUNT/GH_PROJECT,mat2017-08-211-1/+0
* cad/repsnapper: Update to 2.5a4swills2017-08-193-19/+14
* Explicitly pass -std=gnu++03 to the compiler.rakuco2017-08-181-0/+3
* cad/NASTRAN-95: update 20151227 -> 20160908 and set MAINTAINERrobak2017-08-176-21/+21
* - Update to 3.10.3danilo2017-08-172-4/+4
* - Update to 9.7.98danilo2017-08-172-4/+4
* cad/calculix: attempt to fix build from pkg-fallout.pfg2017-08-164-8/+31
* cad/calculix: Split the ccx analyzer out of the main port.pfg2017-08-1514-3274/+3371
* Update to r20170812181047.mr2017-08-144-371/+1062
* Update to 3.17.3.6 and add missing linetypes.mr2017-08-134-122/+685
* Update to 3.13.1jhale2017-08-049-82/+4
* Explicitly build with -std=gnu++03.rakuco2017-08-021-0/+6
* cad/gmsh: Update to version 3.0.4jrm2017-08-023-6/+6
* Explicitly build with -std=gnu++11.rakuco2017-07-291-0/+7
* Fix a few runtime issues.trasz2017-07-282-47/+49
* cad/openvsp: Update from 3.12.1 to 3.13.0tz2017-07-276-4/+39
* * Enabled CIDERultima2017-07-273-22/+37
* Unbreak and update to 20170708.trasz2017-07-258-373/+278
* Fix on i386 (no impact where on other archs).thierry2017-07-194-1/+45
* Oops... Remove mfront (not yet ready).thierry2017-07-181-1/+0
* Upgrade Kicad to 4.0.7 (the latest stable release).thierry2017-07-1840-3083/+6184
* Upgrade to 7.1.0.thierry2017-07-1613-6311/+2738
* Update CalculiX to version 2.12.pfg2017-06-289-57/+408
* Update devel/readline to 7.0 patch 3sunpoet2017-06-273-2/+3
* Make ninja opt-out in cmake.mktcberner2017-06-263-3/+3
* cad/gmsh: Update to version 3.0.3jrm2017-06-253-5/+6
* Begin deorbit burn of ia64. We have not attempted to build packages forlinimon2017-06-251-1/+1
* Update to r20170624104526.mr2017-06-254-231/+334
* Update to 3.12.1matthew2017-06-234-19/+10
* Update to 20170602115111.mr2017-06-203-372/+578
* Update to 3.17.1.0mr2017-06-205-9/+151
* * Updated to 20170527 (d28bae3)ultima2017-06-195-22/+55
* Upgrade science/hdf5-18 to 1.8.19.thierry2017-06-171-1/+1
* Drop support for superlu_mt.thierry2017-06-171-15/+1
* Remove no-op WX_UNICODEsunpoet2017-06-102-2/+0
* - Update to 0.0.19amdmi32017-06-095-206/+172
* Convert every usage of https://github.com/.../archive/xxx to USE_GITHUB.mat2017-06-072-16/+12
* Update WWWsunpoet2017-05-301-1/+1
* Update science/hdf5 to 1.10.1sunpoet2017-05-302-2/+2
* Register dependency on groffantoine2017-05-291-0/+1
* Mark some ports failing on armv6, for errors classified as "clang".linimon2017-05-271-0/+2
* - Udate to 20170519joneum2017-05-269-22/+22
* Revision bump of all ports with USE_GL after consolidation of mesa-libsrezny2017-05-2321-20/+21
* Mark some ports failing on power64. In cases where the error messagelinimon2017-05-224-1/+9
* Mark some ports failing on power64. In cases where the error messagelinimon2017-05-211-2/+2
* cad/gmsh: Update to version 3.0.2jrm2017-05-173-4/+5
* Remove svn keywords from patches.mat2017-05-153-3/+0
* - Update WWWamdmi32017-05-131-2/+1
* Mark BROKEN: fails to buildantoine2017-05-121-0/+2
* - Update to 3.10.1danilo2017-05-084-6/+28
* Add a port of ZCAD, simple CAD program with AutoCAD DXF 2000 file formatdanfe2017-05-0314-0/+718
* devel/boost-*: update to 1.64.0jbeich2017-05-027-7/+7
* Provide error messages for some ports failing on aarch64, and, in alinimon2017-05-021-0/+2
* cad/brlcad: unexpire, it builds fine with current graphics/urtrene2017-04-281-3/+0
* - Fix shebangsmiwi2017-04-241-2/+4
* cad/gmsh: Update to version 3.0.1jrm2017-04-213-83/+121
* - Fix LICENSEamdmi32017-04-212-1/+4
* - Fix LICENSEamdmi32017-04-201-5/+5
* - Fix shebangsmiwi2017-04-181-2/+3
* Bump PORTREVISIONs for ports depending on the canonical version of GCC andgerald2017-04-0125-14/+25
* - Update to 3.11.0wen2017-03-304-5/+23
* - Update devel/libpthread-stubs to 0.4ashish2017-03-292-7/+8
* Fix still needed patch.mr2017-03-241-22/+21
* Update to 3.16.7.0mr2017-03-244-42/+103
* Update to r20170322171812.mr2017-03-235-28/+40
* Update to 1.1.2.hrs2017-03-212-4/+8
* update to 20170310.vanilla2017-03-203-80/+92
* Fix typo in patch.mr2017-03-141-1/+1
* Update to 20170312170442 and try to fix PR 217729 too.mr2017-03-135-25/+26
* Update to 2.3.6.araujo2017-03-112-3/+4
* Update to version 20170308230210.mr2017-03-104-817/+284
* Update devel/tbb to 2017.5martymac2017-03-071-1/+1
* - Update to 9.7.96danilo2017-03-042-4/+4
* Mark a few leaf ports broken on aarch64.linimon2017-02-251-1/+3
* Update to 3.16.5mr2017-02-243-205/+1408
* Update to r20170224025915mr2017-02-245-1445/+4230
* - Update to 0.17.g20170204amdmi32017-02-223-34/+59
* Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some moretcberner2017-02-192-27/+0
* Update to 5.4krion2017-02-024-102/+144
* cad/alliance: unbreak on 12.0 after base r308264jbeich2017-02-022-1/+12
* - Autodetect the installed linux_base port and use LINUX_DEFAULT only astijl2017-02-011-1/+1
* Mark various ports broken on aarch64 and armv6.linimon2017-01-311-1/+2
* - Update to 3.8.83danilo2017-01-282-4/+4
* Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/sunpoet2017-01-212-2/+2
* Fix plist of cad/qcad -- don't add the manually created desktop file to the p...tcberner2017-01-201-1/+0
* The output of tools like awk, date, sort, tr,... depends on the currenttijl2017-01-182-15/+6
* - Update to 2.1.3jhale2017-01-153-14/+25
* Drop dependency on devel/libc++.thierry2017-01-141-9/+3
* cad/gmsh: Update to version 2.16.0.jrm2017-01-133-4/+5
* cad/openvsp: update 3.9.1 -> 3.10.0robak2017-01-116-6/+37
* - Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOLamdmi32017-01-092-13/+3
* Use PYTHON_PKGNAMEPREFIX instead of py${PYTHON_SUFFIX}-sunpoet2017-01-081-1/+1
* - Update to 20170104 snapshotwen2017-01-083-18/+44
* devel/boost-*: update to 1.63.0jbeich2017-01-067-7/+7
* Never set WRKSRC when using USE_GITHUB.mat2017-01-042-5/+3
* cad/openvsp: drop 10.1 workaround (revert r428665) per EOLjbeich2017-01-031-13/+1
* - Fix configureantoine2017-01-021-1/+6
* Use USES=python instead of LIB_DEPEDNS + python:build.hrs2017-01-011-3/+1
* Update to 0.24.9.hrs2017-01-012-6/+8
* Remove BROKEN_FreeBSD_9sunpoet2017-01-016-12/+0
* - Fix condition for FreeBSD 10.1amdmi32016-12-291-1/+1
* - No more broken after removing gcc requirement from math/cgalamdmi32016-12-291-6/+0
* Set expiration date of ports depending on graphics/urt to 2017-04-01rene2016-12-271-0/+3
* Libopencad is a library written in C++11, which provides a way toamdmi32016-12-268-0/+125
* - Mark broken in FreeBSD 11.x+ i386: this port can't build while cgal is buil...amdmi32016-12-261-1/+7
* Move the doxygen things into a DOXYGEN option.mat2016-12-212-1062/+1062
* Move doxygen dependency to a DOXYGEN option, and have it actually domat2016-12-211-4/+7
* Get rid of QT_PREFIX in favour of PREFIX.tcberner2016-12-191-1/+1
* cad/openvsp: fix compilation in 10.1tz2016-12-161-2/+15
* Switch USES=compiler:gcc-c++11-lib to use base libc++ on 10.2+ systemsjbeich2016-12-162-1/+2
* Those ports build fine with bsd makeantoine2016-12-121-1/+1
* multimedia/ffmpeg: update to 3.2.2jbeich2016-12-111-1/+1
* Remove libintl.so.9 compatibility link that was added in r374303 totijl2016-12-095-5/+5
* Remove libexpat.so.6 compatibility link that was added in r374303 totijl2016-12-091-1/+1
* Remove libtiff.so.4 compatibility links that were added in r374303 totijl2016-12-091-1/+1
* cad/gmsh: update to version 2.15.0jrm2016-12-072-6/+5
* Bump PORTREVISIONS for ports depending on the canonical version of GCC andgerald2016-12-079-7/+9
* Do not use post-stage. Use post-install instead.mat2016-12-021-1/+1
* Stop exporting QT_BINDIR and QT_LIBDIR to PLIST_SUB.tcberner2016-11-291-10/+10
* - Fix library version which should be .2 (as on Linux), not .4martymac2016-11-251-1/+1
* - Update to 9.07danilo2016-11-242-7/+8
* devel/boost-*: update to 1.62.0jbeich2016-11-237-4/+7
* Chase french/med upgrade (switch to hdf5-18).thierry2016-11-231-0/+18
* In several dozen ports, use single space for WWW: line in pkg-descr, anddanfe2016-11-221-1/+1
* Fix build on 9.x.hrs2016-11-226-28/+28
* - When FFMPEG=on, link to multimedia/ffmpeg.stephen2016-11-215-46/+103
* Bump PORTREVISIONS for ports depending on the canonical version of GCC andgerald2016-11-203-1/+3
* - Add LICENSEamdmi32016-11-181-6/+6
* Fix build.hrs2016-11-161-2/+10
* Mark as broken on various tier-2 archs.linimon2016-11-141-0/+2
* Upgrade Code_Aster to 12.0.6-4.thierry2016-11-134-36/+46
* Spell CHOSEN_COMPILER_TYPE correctlyantoine2016-11-132-6/+6
* Fix build with gcc 4.9 by lowering optimization levelantoine2016-11-121-1/+7
* Mark various cad ports broken on aarch64.linimon2016-11-113-0/+6
* Mark broken on aarch64: fails to link with sbrk.linimon2016-11-111-0/+2
* Rename with python-gdsii, which is the official package name in PyPI.hrs2016-11-114-4/+3
* Mark as broken on aarch64: fails to link with sbrk.linimon2016-11-102-0/+4
* cad/solvespace: create portswills2016-11-106-0/+77
* - Pet portlintamdmi32016-11-072-13/+13
* cad/klayout: Include DragonFly with new patch to restore build on DFmarino2016-11-071-1/+1
* Fix broken dependencies.hrs2016-11-072-9/+11
* Update to 20161104 snapshot; drop maintainershipriggs2016-11-063-10/+18
* Add cad/sp2sp, a command-line waveform data processor for SPICE-typehrs2016-11-066-0/+134
* Fix build.hrs2016-11-061-1/+2
* Update to 20161026 snapshotriggs2016-11-059-19/+24
* - Update to 0.24.8.hrs2016-11-055-30/+76
* cad/ngspice_rework: Fix fetch broken by version bumpmarino2016-11-051-1/+2
* Add cad/py-gdsii, GDSII file manipulation library.hrs2016-11-054-0/+29
* cad/ngspice_rework: configure xspice unconditionallymarino2016-11-041-3/+3
* cad/ngspice_rework: Enable X support by default (introduce X11 option)marino2016-11-041-2/+10
* cad/gmsh: Update distinfo after upstream rolled a new tarball without a newjrm2016-11-032-5/+3
* cad/gmsh: update to version 2.14.1jrm2016-11-023-5/+6
* - Update to 0.5vg2016-10-314-2053/+3075
* Remove wrongly used QT-related plist-subs from plisttcberner2016-10-281-1/+1
* ${RM} already has -f.mat2016-10-214-4/+4
* Reassign makc's ports back to the pool.rakuco2016-10-201-1/+1
* - Update devel/tbb to version 2017.1martymac2016-10-191-1/+1
* - Double-quote $@ to properly propagate parameters down the execution pathdanfe2016-10-171-1/+1
* cad/feappv: fix after change in USES=localbase behaviormarino2016-10-171-1/+1
* cad/gmsh, cad/gmsh-occ: update to version 2.14.0jrm2016-10-134-21/+7
* - Switch to options helpersamdmi32016-10-111-12/+15
* - Update to version 0.17.g20160927 [1]pawel2016-10-093-6/+14
* Clean upantoine2016-10-091-3/+2
* Specify which license the license file refers tojrm2016-10-031-1/+1
* Add LICENSE file and return PORTREVISION=1 to cad/gmsh-occjrm2016-10-032-0/+3
* - Update to 3.8.82danilo2016-10-012-4/+4
* Remove PORTREVISION after cad/gmsh update and take maintainershipjrm2016-09-301-2/+1
* Re-add MAKE_JOBS_UNSAFE=yesjrm2016-09-301-0/+2
* Update cad/gmsh to 2.13.2; fix knob issue; other changesjrm2016-09-307-293/+229
* Mark cad/gmsh-occ BROKEN for -CURRENT / i386.thierry2016-09-281-0/+6
* - Update devel/doxygen to 1.8.12antoine2016-09-282-3/+1
* - Update devel/icu to 57.1.tijl2016-09-244-9/+10
* - Update to 9.7.95danilo2016-09-182-4/+4
* - Remove unneeded MASTER_SITESamdmi32016-09-171-1/+0
* - Update to 3.9.1amdmi32016-09-177-85/+6
* Release some of my ports back to the heapmarino2016-09-151-1/+1
* - Switch to newly supported CC licensesamdmi32016-09-131-4/+3
* kicad switched to GIT (still hosted on launchpad) for development.mr2016-09-135-298/+95
* Most commonly used build systems support silent builds, when theyamdmi32016-09-102-2/+0
* (Readdition of cad/freecad which was removed on 235718)mat2016-09-087-0/+911
* - In Uses/linux.mk use the loop variable directly when appending totijl2016-09-071-1/+1
* - Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk withtijl2016-09-061-2/+2
* cad/NASTRAN-95: Update license acronym and reset maintainershipmarino2016-09-061-2/+2
* cad/NASTRAN-95: Fix hardcoded FC and FFLAG flags in patchmarino2016-09-051-2/+2
* - Pass maintainership to Joseph Mingrone <jrm@ftfl.ca> with his permission.stephen2016-09-011-1/+1
* Update to version 3.9.0pawel2016-08-269-5/+88
* cad/NASTRAN-95: Report version as FREEBSD rather than LINUXmarino2016-08-231-0/+5
* Update to 3.3.76zeising2016-08-212-4/+4
* Update to 2.11maho2016-08-177-43/+262
* New port: cad/NASTRAN - NASA's classic FEA program.pfg2016-08-129-1/+1
* New port: cad/NASTRAN - NASA's classic FEA program.pfg2016-08-129-0/+608
* Update to version 3.8.1pawel2016-08-042-4/+4
* Try to fix shared library links.mr2016-08-033-7/+23
* Update to version 8.2.20160715pawel2016-08-019-15/+18
* cad/openvsp: 3.7.2 -> 3.8.0pi2016-07-313-3/+52
* - Change maintainer email [1]pawel2016-07-281-4/+5
* - Update to 3.8.81danilo2016-07-252-6/+6
* - Update to 9.7.94danilo2016-07-242-3/+4
* - update libgd to 2.2.2dinoex2016-07-201-1/+1
* LinuxCNC controls CNC machines. It can drive milling machines,trasz2016-07-1333-0/+3072
* Remove expired ports without open PRs:rene2016-07-054-44/+0
* Update to 3.3.73zeising2016-06-287-20/+27
* Update to upstream version 3.7.2riggs2016-06-262-7/+5
* Prefer relative links to make packages more relocation friendlybapt2016-06-234-9/+9
* cad/openvsp: 3.6.1 -> 3.6.2pi2016-06-163-3/+6
* cad/kicad-devel: Fix faulty IGNORE message which falsely traps DFmarino2016-06-151-0/+2
* - Take maintainership.hrs2016-06-105-19/+36
* - Delete the usage of %%QT_BINDIR%% in pkg-plist (NB.: %%QT_BINDIR%% is still...mr2016-06-094-508/+1626
* - Update to r6904,mr2016-06-094-32/+75
* Remove unneeded usage of:mat2016-06-061-2/+1
* cad/openvsp: 3.6.0 -> 3.6.1pi2016-06-053-3/+4
* Deprecate ports broken for more than 6 monthsantoine2016-06-041-0/+2
* Update to 10.1.1zeising2016-05-282-4/+5
* cad/ghdl: build it with gcc6-aux, not gcc5-auxmarino2016-05-271-1/+2
* Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by...amdmi32016-05-243-3/+3
* Convert tab after WWW: in pkg-descrs to single space as per PHBamdmi32016-05-241-1/+1
* - Fix trailing whitespace in Makefilesamdmi32016-05-191-1/+1
* - Fix trailing whitespace in pkg-descrs, categories [a-f]*amdmi32016-05-1919-60/+60
* Add cad/py-gdspy, Python module for creating GDSII stream files.hrs2016-05-174-0/+38
* Fix dependency.hrs2016-05-171-1/+1
generated by cgit (git 2.34.1) at 2024-11-29 08:18:29 +0800