aboutsummaryrefslogtreecommitdiffstats
path: root/comms
Commit message (Collapse)AuthorAgeFilesLines
* - Remove pkg-config dependency from BUILD_DEPENDS, it'spawel2015-12-161-18/+6
| | | | | | | | | | | | implied by USES=pkgconfig - Switch to USES=execinfo, this will use external libexecinfo from ports only when needed - Use options helpers - Remove usage of deprecated MAN1 variable, pkg-plist is handling this anyway PR: 205271 Submitted by: me Approved by: shurd
* New port: comms/freedvshurd2015-12-156-0/+72
| | | | | | | | | | | | FreeDV is a Digital Voice mode for HF radio. FreeDV allows any SSB radio to be used for low bit rate digital voice. Speech is compressed down to 700-1600 bit/s then modulated onto a 1.25 kHz wide signal comprised of 16 QPSK carriers which is sent to the Mic input of a SSB radio. The signal is received by an SSB radio, then demodulated and decoded by FreeDV. FreeDV 700(B) rivals SSB in it's low SNR performance. At high SNRs FreeDV 1600 sounds like FM, with no annoying analog HF radio noise. WWW: http://freedv.org/tiki-index.php
* Reset maintainereadler2015-12-144-4/+4
|
* At very long last land PyQt5 5.5.1 ports.rakuco2015-12-144-0/+37
| | | | | | | | | | | | Add the required bits to Uses/pyqt.mk along with all the PyQt5 ports. Thankfully this commit is mostly adding new ports, as the hard work was already done in r403297 and r403662. Huge kudos to Tobias Berner <tcberner@gmail.com> and, most importantly, Guido Falsi (madpilot@) for their initial work on these ports (see D2910 in Phabricator for an earlier version of the PyQt5 patch set). PR: 204672
* mark some of the ports that don't build on powerpc64 for meswills2015-12-141-0/+2
|
* Mark as broken: unfetchablebapt2015-12-132-0/+4
|
* Horde package update:mm2015-12-122-3/+3
| | | | | | | | | comms/pear-Horde_ActiveSync 2.30.0 -> 2.30.2 devel/pear-Horde_Core 2.22.1 -> 2.22.3 databases/pear-Horde_Db 2.2.3 -> 2.3.0 devel/pear-Horde_Icalendar 2.1.1 -> 2.1.2 mail/pear-Horde_Imap_Client 2.29.3 -> 2.29.4 security/pear-Horde_Perms 2.1.5 -> 2.1.6
* - Update maintainer mail addressmiwi2015-12-111-3/+2
| | | | | | | | | - Update/Remove MASTER_SITE PR: 204755 Submitted by: jwbacon@tds.net (maintainer) Approved by: mat (mentor) Differential Revision: D4493
* Upgrade comms/mgetty+sendfax to version 1.1.37.olgeni2015-12-1114-94/+94
| | | | | PR: 205152 Submitted by: takefu@airport.fm
* change python version to '-2.7', we don't need symlink of python2.vanilla2015-12-101-1/+1
|
* restore py-gammu.vanilla2015-12-104-0/+28
|
* Upgrade to 1.36.8.vanilla2015-12-108-46/+26
|
* - Whitespace fixesamdmi32015-12-091-8/+10
| | | | | | - Silence patching - Switch to options helpers - Don't install installation instructions
* Don't set DISTNAME when using USE_GITHUB and MASTER_SITES=GH, themat2015-12-082-3/+2
| | | | | | | framework already sets a unique DISTNAME. With hat: portmgr Sponsored by: Absolight
* - Add LICENSE_FILEamdmi32015-12-071-9/+12
| | | | | | - Don't install install instructions - Simplify installation - Switch to options helpers
* - Add LICENSEamdmi32015-12-072-6/+10
| | | | | - Fix pkg-message handling - Switch to options helpers
* - Add LICENSEamdmi32015-12-071-0/+9
| | | | - Switch to options helpers
* Simply remove test per upstream suggestion.shurd2015-12-061-1/+1
| | | | This allows builds against wxWidgets 3.0+ to succeed.
* comms/usbmuxd: apply udev workaround to DragonFly as welljbeich2015-12-061-1/+1
| | | | | | | | | --- 39-usbmuxd.rules --- /usr/bin/sed -r -e 's|@udev_activation_rule[@]|RUN+="@sbindir@/usbmuxd --user usbmux --udev"|g' -e 's|@sbindir[@]|/usr/local/sbin|g' < > 39-usbmuxd.rules || rm 39-usbmuxd.rules sh: Syntax error: redirection unexpected (expecting word) Reported by: http://muscles.dragonflybsd.org/bulk/latest-per-pkg/usbmuxd/ Approved by: portmgr blanket
* - Add LICENSEamdmi32015-12-051-1/+4
| | | | - Switch to options helpers
* - Switch to options helpersamdmi32015-12-051-0/+2
|
* - Clarify LICENSEamdmi32015-12-051-1/+4
| | | | | - Add LICENSE_FILE - Switch to options helpers
* Install translations, set LICENSE, and fix up dependenciesshurd2015-11-302-5/+18
| | | | | PR: 201719 Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
* Remove runtime dependency on nec2cshurd2015-11-301-1/+0
| | | | | PR: 196329 Submitted by: Kevin Zheng <kevinz5000@gmail.com>
* Fix build for 9.xshurd2015-11-304-8/+15
|
* Fix runtime segfault due to uninitialised variable, bump PORTREVISIONriggs2015-11-304-12/+51
| | | | | | | | | | While on it: - Pet portlint: regenerate patches using 'make makepatch' - Add LICENSE PR: 204845 Submitted by: yama@jasper.co.jp MFH: 2015Q4 (ports-secteam fix blanket)
* Update to 2.1.3shurd2015-11-2915-173/+299
| | | | | Pull from arrl.org instead of sourceforge, since that seems to be the "official" distribution location. Cleaned up patches and sent them upstream
* Remove expired ports:rene2015-11-2934-676/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2015-11-26 audio/pecl-id3: Broken for more than 6 months 2015-11-26 dns/geta: Broken for more than 6 months 2015-11-26 finance/openerp-web: Broken for more than 6 months 2015-11-26 devel/py-async: Further using of this module is not encouraged by upstream 2015-11-26 chinese/kon2: Depends on expiring chinese/cce 2015-11-26 games/linux-skulltag: Depends on expiring audio/linux-fmodapi 2015-11-26 archivers/wzip: Broken for more than 6 months 2015-11-26 databases/sybtcl: Broken for more than 6 months 2015-11-26 biology/povchem: Broken for more than 6 months 2015-11-26 audio/btc: Broken for more than 6 months 2015-11-26 astro/wmglobe: Broken for more than 6 months 2015-11-26 graphics/pyro: Broken for more than 6 months 2015-11-26 graphics/jpeg2ps: Broken for more than 6 months 2015-11-26 chinese/gugod-clean: Broken for more than 6 months 2015-11-26 comms/bforce: Broken for more than 6 months 2015-11-26 cad/geda-docs: Broken for more than 6 months 2015-11-26 chinese/cwtexttf: Broken for more than 6 months 2015-11-26 comms/zmtx-zmrx: Broken for more than 6 months 2015-11-26 astro/sky2000: Broken for more than 6 months 2015-11-26 deskutils/libopensync-plugin-file: Broken for more than 6 months 2015-11-26 databases/sqlite-ext-mobigroup: Broken for more than 6 months 2015-11-26 chinese/bg5ps: Broken for more than 6 months 2015-11-26 deskutils/x-tile: Broken for more than 6 months 2015-11-26 graphics/pure-gl: Broken for more than 6 months 2015-11-26 audio/dvda-author: Broken for more than 6 months 2015-11-26 chinese/oxim: Broken for more than 6 months 2015-11-26 editors/spe: Broken for more than 6 months 2015-11-26 audio/mpdscribble: Broken for more than 6 months 2015-11-26 cad/geda-symcheck: Broken for more than 6 months 2015-11-26 audio/linux-fmodapi: Broken for more than 6 months 2015-11-26 audio/pure-audio: Broken for more than 6 months 2015-11-26 editors/bpatch: Broken for more than 6 months 2015-11-26 benchmarks/geekbench: Broken for more than 6 months 2015-11-26 graphics/icoconvert: Broken for more than 6 months 2015-11-26 cad/geda-utils: Broken for more than 6 months 2015-11-26 deskutils/tomboy-plugin-wordcount: Broken for more than 6 months 2015-11-26 graphics/sketch: Broken for more than 6 months 2015-11-26 ftp/spegla: Broken for more than 6 months 2015-11-26 graphics/clutter-box2d: Broken for more than 6 months 2015-11-26 audio/scmpc: Broken for more than 6 months 2015-11-26 ftp/gnusget: Broken for more than 6 months 2015-11-26 comms/gpsk31: Broken for more than 6 months 2015-11-26 cad/geda-gschem: Broken for more than 6 months 2015-11-26 audio/ampache: Broken for more than 6 months 2015-11-26 cad/slffea: Broken for more than 6 months 2015-11-26 audio/cripple: Broken for more than 6 months 2015-11-26 cad/geda-gattrib: Broken for more than 6 months 2015-11-26 cad/findhier: Broken for more than 6 months 2015-11-26 biology/njplot: Broken for more than 6 months 2015-11-26 audio/wmmp: Broken for more than 6 months 2015-11-26 x11/avant-window-navigator: Broken for more than 6 months 2015-11-26 cad/geda-netlist: Broken for more than 6 months 2015-11-26 deskutils/libopensync-plugin-sunbird: Broken for more than 6 months 2015-11-26 biology/ortep3: Broken for more than 6 months 2015-11-26 astro/aa: Broken for more than 6 months 2015-11-26 french/belote: Broken for more than 6 months 2015-11-26 converters/p5-String-SetUTF8: Broken for more than 6 months 2015-11-26 cad/geda-examples: Broken for more than 6 months 2015-11-26 editors/yasnippet: Broken for more than 6 months 2015-11-26 audio/musica: Broken for more than 6 months 2015-11-26 graphics/rubyphoto: Broken for more than 6 months 2015-11-26 german/bsdpaste: Broken for more than 6 months 2015-11-26 audio/amrcoder: Broken for more than 6 months 2015-11-26 sysutils/bashburn: Broken for more than 6 months 2015-11-26 editors/e93: Broken for more than 6 months 2015-11-26 audio/tepsonic: Broken for more than 6 months 2015-11-26 astro/ephem: Broken for more than 6 months 2015-11-26 chinese/cce: Broken for more than 6 months 2015-11-26 graphics/qcread: Broken for more than 6 months 2015-11-26 databases/py-sqlkit: Broken for more than 6 months 2015-11-26 databases/usogres: Broken for more than 6 months 2015-11-26 cad/libgeda: Broken for more than 6 months 2015-11-26 chinese/p5-Lingua-ZH-BPMFConvert: Broken for more than 6 months 2015-11-26 french/alphabet_sounds_fr: Broken for more than 6 months 2015-11-26 deskutils/mrundlg: Broken for more than 6 months 2015-11-26 databases/erlang-mysql: Broken for more than 6 months 2015-11-26 graphics/linux-XnViewMP: Broken for more than 6 months 2015-11-26 deskutils/akamaru: Broken for more than 6 months 2015-11-26 dns/p5-Net-DNS-ZoneCheck: Broken for more than 6 months 2015-11-26 astro/dgpsip: Broken for more than 6 months 2015-11-26 databases/pecl-handlersocket: Broken for more than 6 months 2015-11-26 audio/cymbaline: Broken for more than 6 months 2015-11-26 french/dico: Broken for more than 6 months 2015-11-26 comms/qpage: Broken for more than 6 months 2015-11-26 audio/sonice: Broken for more than 6 months 2015-11-26 cad/geda-symbols: Broken for more than 6 months 2015-11-26 databases/java-mybatis: Broken for more than 6 months 2015-11-26 databases/openbase-jdbc: Broken for more than 6 months 2015-11-27 www/mediawiki119: Please upgrade to mediawiki-1.25 2015-11-28 www/R-cran-Rpad: Unmaintained upstream
* Update to lateest release.shurd2015-11-286-6/+26
| | | | This release adds more contest rules.
* Update to latest release.shurd2015-11-284-7/+18
|
* Update to 0.9.2.1shurd2015-11-282-3/+3
|
* Clean up port to use pkgconfigdb2015-11-262-27/+1
| | | | No change to actual port produced binaries results.
* WSJTX ("Weak Signal Communication, by K1JT") offers specific digital protocolsdb2015-11-269-0/+208
| | | | | | | | | optimized for meteor scatter, ionospheric scatter, and EME (moonbounce) at VHF/UHF, as well as HF skywave propagation. The program can decode fraction-of-a-second signals reflected from ionized meteor trails and steady signals 10 dB below the audible threshold. This version is a non python Qt app.
* comms/gkermit: fix MASTER_SITES, unbreakpi2015-11-181-4/+1
| | | | Submitted by: Patrick McMunn <doctorwhoguy@gmail.com>
* - Fix build on HEADamdmi32015-11-181-0/+1
|
* comms/dabstick-radio: Expand patch to support malloc.h-less DFmarino2015-11-134-5/+5
| | | | While here, regenerate the rest of the patches.
* - Fix licenseamdmi32015-11-102-6/+7
| | | | | - Switch to options helpers - Regenerate patches with `make makepatch`
* comms/dcf77pi: update to 3.4.0rene2015-11-092-3/+10
| | | | | | Add option to create Doxygen HTML Changelog: https://github.com/rene0/dcf77pi/releases/tag/3.4.0
* Fix ports that confused the meaning of WRKDIR and WRKSRC.mat2015-11-051-2/+2
| | | | | | | | PR: 204056 Submitted by: mat Reviewed by: bapt Sponsored by: Absolight Differential Revision: https://reviews.freebsd.org/D2735
* - Update to version 2.1, now hosted at GitHubpawel2015-10-304-9/+30
| | | | | | | | | | - Removed need to use gmake or specify ALL_TARGET - Define LICENSE - Respect CFLAGS, CPPFLAGS, LDFLAGS during build - Add DEBUG option PR: 203842 Submitted by: Sergey Kozlov
* Horde package update:mm2015-10-292-3/+3
| | | | | comms/pear-Horde_ActiveSync 2.30.0 -> 2.30.1 mail/horde-turba 4.2.10 -> 4.2.11
* Update to 2.3.2martymac2015-10-282-4/+11
|
* Update to version 20150716martymac2015-10-283-22/+18
|
* Deprecate ports broken for more than 6 monthsantoine2015-10-265-0/+10
|
* Remove badly set BROKENbapt2015-10-241-2/+0
|
* Mark as broken, does not fetchbapt2015-10-241-0/+2
|
* Horde package update:mm2015-10-232-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.29.2 -> 2.30.0 devel/pear-Horde_Core 2.22.0 -> 2.22.1 devel/pear-Horde_Nls 2.0.5 -> 2.1.0 devel/pear-Horde_Notification 2.0.2 -> 2.0.3 textproc/pear-Horde_Pdf 2.0.5 -> 2.0.6 devel/pear-Horde_Queue 1.1.2 -> 1.1.3 security/pear-Horde_Secret 2.0.4 -> 2.0.5 www/pear-Horde_SessionHandler 2.2.4 -> 2.2.5 devel/pear-Horde_Token 2.0.6 -> 2.0.7 devel/horde-content 2.0.4 -> 2.0.5 ftp/horde-gollem 3.0.5 -> 3.0.6 www/horde-base 5.2.7 -> 5.2.8 mail/horde-imp 6.2.10 -> 6.2.11 mail/horde-ingo 3.2.6 -> 3.2.7 deskutils/horde-kronolith 4.2.9 -> 4.2.11 deskutils/horde-mnemo 4.2.7 -> 4.2.8 deskutils/horde-nag 4.2.5 -> 4.2.6 www/horde-passwd 5.0.3 -> 5.0.4 www/horde-trean 1.1.2 -> 1.1.3 mail/horde-turba 4.2.8 -> 4.2.10 mail/horde-webmail 5.2.10 -> 5.2.11 deskutils/horde-groupware 5.2.10 -> 5.2.11
* - Add LICENSE_FILEamdmi32015-10-221-7/+8
| | | | - Pet portlint
* - Update `comms/libirman' port to version 0.4.6danfe2015-10-224-12/+23
| | | | | | - Update MAINTAINER to their new email address PR: 202488 (modified)
* To the pool: do not use the port any more and have no spare time tobsam2015-10-191-1/+1
| | | | maintain it.
* Fix make patchantoine2015-10-171-4/+4
|
* comms/nmealib is not jobs safemarino2015-10-161-2/+4
| | | | | | | nmealib reproducibly fails even with -j2. The build tries to link libnmea before its is built. While here, vertically align a couple of standard definitions.
* Drop 8 support.mat2015-10-156-64/+3
| | | | | | With hat: portmgr Sponsored by: Absolight Differential Revision: https://reviews.freebsd.org/D3694
* Update to 20151011.kevlo2015-10-152-3/+3
|
* comms/py-serial:makc2015-10-142-6/+18
| | | | | | | | | - Use options helpers - Fix packaging with python3 - Add patch to make tools.list_ports usable on FreeBSD (committed upstream) PR: 202887 Approved by: sbz (maintainer timeout 5 weeks)
* graphics/GraphicsMagick: Upgrade version 1.3.21 => 1.3.22marino2015-10-121-1/+1
| | | | | | | | | | | | | GraphicsMagick was just updated, but there was as newer, second PR to upgrade it once more. And again, the shared library version has been bumped (haven't these guys heard of symbol versioning?) While the INDEX references 114 users of GraphicksMagick, I'm going to only bump the same 8 ports as yesterday. The bump script appears to be obsolete (still uses CVS!) PR: 203547 Submitted by: Walter Schwarzenfeld
* Update to 3.5.0db2015-10-115-20/+30
| | | | | | | | | | | | | | | | | | | 2015-09-29 Kamil Ignacak * bugfix: fixing code that resets tone queue on flushing. A bug was found on FreeBSD: after pressing Ctrl+C, application that wanted to stop and delete generator as part of SIGINT handling procedure, got stuck in cw_tq_flush_internal() function, waiting for tone queue to go idle. This never happened. Resetting all tone queue state variables in flush function ensures that the function completes and returns, and that client application can exit. 2015-09-12 Kamil Ignacak * xcwcp: the application souce code files are now ported to Qt5. Build system files have been modified to use Qt5 to build xcwcp. Discovery and adding -fPIC to compiler flags for xcwcp is right now very naive, perhaps that will have to be improved in the future.
* graphics/GraphicsMagick: Upgrade version 1.3.20 => 1.3.21marino2015-10-101-1/+1
| | | | | | | | The shared library versions changed, so bump all the ports that depend on GraphicsMagick by default too. PR: 200304 Submitted by: ports fury
* Remove iconv(), iconv_open() and iconv_close() symbols from libiconv.tijl2015-10-103-8/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These were FreeBSD specific aliases for libiconv(), libiconv_open() and libiconv_close() that are now also provided by libc which complicates writing configure tests that work correctly when both libc iconv and libiconv are available. Also, because the libiconv iconv.h header redefines iconv* to libiconv* correct use of the header implies that the aliases aren't used. The following ports needed fixes because there was something wrong with the way they tried to detect or use iconv: audio/deadbeef: Remove LIBICONV_PLUG from a source file. It's a compile-time option and should not be set in source code. comms/hidapi: Use standard AM_ICONV configure macro to look for iconv. deskutils/fbreader: Let ports framework deal with LIBICONV_PLUG. deskutils/ljclive: Override configure test for iconv. deskutils/owncloudclient: Add USES=iconv and patch test for iconv. devel/aegis: Bump PORTREVISION because it no longer uses libiconv. devel/libexplain: Add USES=iconv and override test for iconv. devel/sdl20: Override configure test for iconv. emulators/vmw: Replace OSVERSION checks with ICONV_LIB checks and include <iconv.h> instead of <sys/iconv.h>. irc/scrollz: Override configure test for iconv. japanese/chasen-base: Override configure test for iconv and patch configure so it no longer adds -liconv to linker flags just because it happens to be installed. japanses/eb: Patch configure test for iconv. japanses/eblook: Override configure test for iconv. java/jikes: Override configure test for iconv. multimedia/transcode: Bump PORTREVISION because only one plugin links with libiconv now. net/c3270: Override configure test for iconv. net/samba4*: Bump PORTREVISION because it no longer uses libiconv. The configure script will always add -liconv to the linker flags when it happens to be installed which would be wrong but later on binaries are linked with -Wl,--as-needed and the linker discards -liconv because it finds iconv*() functions in libc now and no longer in libiconv. net-mgmt/icinga-*: Remove dependency on iconv. net-mgmt/netxms: Patch configure so it no longer adds -liconv to linker flags just because it happens to be installed. net/asterisk11: Patch configure so it no longer adds -liconv to linker flags just because it happens to be installed. net-p2p/transmission-*: Override configure test for iconv. www/htmlcxx: Override configure test for iconv. www/httrack: Override configure test for iconv. www/xapian-omega: Override configure test for iconv. x11/mrxvt(-devel): Add USES=iconv and override configure test for iconv. x11/x3270: Override configure test for iconv. x11-wm/jwm: Override configure test for iconv. PR: 202838 Exp-run by: antoine Approved by: portmgr (antoine)
* comms/ncid: 1.1 -> 1.2pi2015-10-093-6/+7
| | | | | | | | | Changes: See doc/CHANGES - added a hangup-feature - man-pages updated PR: 203615 Submitted by: Carlos J. Puga Medina <cpm@fbsd.es> (maintainer)
* Remove trailing whitespace from Makefiles, A-L.olgeni2015-10-081-1/+1
|
* - Switch to options helpersamdmi32015-10-071-14/+9
| | | | | | - Add LICENSE_FILE Approved by: portmgr blanket
* - Add LICENSE_FILEamdmi32015-10-061-1/+4
| | | | | | | - Add missing run-depend on bash - Remove no-op SHEBANG_LANG Approved by: portmgr blanket
* - Add LICENSE_FILEamdmi32015-10-061-0/+3
| | | | - Fix build by linking with libm
* - Add LICENSE_FILEamdmi32015-10-061-0/+3
| | | | | | - Fix build by linking with libm Approved by: portmgr blanket
* Update to 3.7.8db2015-10-047-278/+357
| | | | | | | | | | | | | USE_GCC=yes causes the build to fail on systems where clang and libc++ are used by default (see bug 202143, for example). This essentially means comms/gnuradio currently only builds on 9.x. The problem is caused by the fact that on 10.x and later boost is likely built using clang and libc++, but USE_GCC=yes forces gnuradio to be built with GCC and libstdc++. Ports r392951 mentioned USE_GCC=yes was added because "clang's builtins were conflicting with gnuradio", which does not seem to happen in my tests at least. PR: ports/203500 Submitted by: takefu@airport.fm
* Fix goof with missed plist entriesdb2015-10-042-2/+6
| | | | | Strip libraries Move hamlib.info from plist into Makefile using INFO
* Upgrade fldigidb2015-10-0318-36/+94
| | | | | | | | =Version 3.23.03= FSQ and fixes for FSQ bugs. Various fixes for Olivia/Contestia, macro bug, WEFAX hang on INFO Added ifkp modem
* The Hamlib Group is pleased to announce the release of Hamlib 3.0.db2015-10-0210-203/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This release of Hamlib introduces a change to the version scheme. Essentially, the leading '1.' characters have been dropped so '3.0' is a direct follow on from the '1.2.' releases and has been configured to be ABI compatible with the '1.2.' releases. Bug fixes to this release will start with '3.0.1' through '3.0.n'. The next releases will be '3.1' through '3.n' until the next major release. Files are hosted at the Hamlib prjoect page at SourceForge.net: https://sourceforge.net/projects/hamlib/files/hamlib/3.0/ The changes include: Version 3.0 2015-09-20 * Kill RPC backends and rpc.rigd/rpc.rotd * Remove -e|--end-marker option from rigctld and rotctld * Build system updates--remove obsolete macros, autogen.sh now runs autoreconf to invoke Autotools to bootstrap the build system, libltdl is installed into the source tree as a part of the build system bootstrap and is included in the source tarball, ABI version is set to be compatible with the 1.2 series, all Autotools installed files are copied rather than symlinked and put in the build-aux directory, building rigmem and rigmatrix are now user selectable at configure run time, building static libraries are disabled by default. Fixed TCL binding installation, fixed Perl binding build so it is not invoked by 'make dist' and clean up build files. Cleaned up bindings builds to occur in alphabetical order. Use new ax_pkg_swig macro and update ax_python_devel macro. Test for presence of pkg-config before testing for pkg-config use. * Implement new RIT/XIT activation/deactivation through rig_get/set_func +() * IC-PCR1500/2500 default write_delay to 0, IC-746/756, IC-PCR8500 fixes, pcr.c, pcr1500.c: Add DSP support. TNX Paul, KE7ZZ * WinRadio G313 updates. TNX Julian Campbel * Readline editing and history support added to rigctl interactive mode. Implement options for reading and writing history file. * Readline editing and history support added to rotctl interactive mode. Implement options for reading and writing history file. * A new manual draft written in Texinfo added. Both GNU Info and single HTML files are built and distributed, requires makeinfo. * Android build system support. See android/README.android. Android Makefile fragments are included in source tarballs. * Monolithic library, thanks to Remi Chateauneu for the majority of the work! This allows enabling of a single static library so static libs are enabled by default. Removes dependency on libltdl. * Fixes to easycomm, TNX Steve AI4QR. * Fixes to port handling allowing PTT and CAT on the same port. TNX Bill, G4WJS. * New Peaberry models V1 and V2 added to kit backend. TNX ON8VQ and R2AEE. * New IC-7100 model. TNX Martin, CT1IQI. * Use AC_CHECK_LIB macro to search for libusb rather than rely on pkg-config. Preserve environment variables LIBUSB_CFLAGS and LIBUSB_LIBS as user precious variables. Two features, --with-xml-support and --enable-usrp still rely on pkg-config so only invoke pkg-config when either or both of these features are selected. Only the Winradio g313 model uses libdl so test for it only when Winradio backend is enabled. * New IC-M700PRO, IC-M710, IC-M802. * New Icom ID-5100 model. * New rotor, cnctrk by KI4SBL * Many backend fixes and updates from many contributors (see Git log for complete details).
* Horde package update:mm2015-09-282-3/+3
| | | | | | | | | comms/pear-Horde_ActiveSync 2.28.6 -> 2.29.2 devel/pear-Horde_Core 2.20.8 -> 2.22.0 security/pear-Horde_Crypt 2.6.0 -> 2.6.1 graphics/pear-Horde_Image 2.3.2 -> 2.3.3 mail/pear-Horde_Imap_Client 2.29.1 -> 2.29.3 mail/pear-Horde_Mime 2.9.1 -> 2.9.2
* Typos, whitespace and capitalization fixes (A-F).olgeni2015-09-216-7/+7
|
* - Fix shebangsamdmi32015-09-181-7/+8
| | | | | | - Unsilence install commands Approved by: portmgr blanket
* - Drop 8.x supportamdmi32015-09-183-63/+2
| | | | | | - Switch to options helpers Approved by: portmgr blanket
* Remove ansi version fo wxGTK 2.8 and only keep the unicode versionbapt2015-09-173-3/+3
| | | | | | | | All applications in the ports tree works correctly with unicode version of wxGTK Newer version of wxGTK are unicode only (3.0+) Note that now WX_UNICODE macro is noop
* Make it so that the default Perl is always called perl5.mat2015-09-144-8/+8
| | | | | | | | | | | | | | | | - Move Perl's man1 files along with its man3 files. - Move where Perl installs its modules man1 pages. - Convert the ports installing man1 pages. - Make different Perl versions installable at the same time. Though you should note that only the default version can be used to install Perl modules, and the non default Perl versions cannot use the modules installed via ports if they contain .so as they are installed in a version specific directory. Reviewed by: bapt (the Mk bits) Exp-run by: antoine Sponsored by: Absolight Differential Revision: https://reviews.freebsd.org/D3542
* - Fix build on 10.x: you can't use gcc when boost is built with clang; and ↵amdmi32015-09-141-4/+6
| | | | | | it builds with clang just fine Approved by: portmgr blanket
* Enforce unicode version of wx (which was already the default but not enforced)bapt2015-09-141-1/+1
|
* Re-apply r396161antoine2015-09-121-0/+4
| | | | | | Ignore on the package builders Reported by: pkg-fallout
* - Fix shebangsamdmi32015-09-121-2/+5
| | | | Approved by: portmgr blanket
* Spell MAKE_JOBS_UNSAFE correctlyantoine2015-09-112-2/+2
|
* Clean up wsjt build and update to reflect latest versiondb2015-09-101-10/+3
| | | | | | Upstream version is now 10 Fix dependency to reflect new naming of tkinter under python3 Fix dependency for kvasd as it is installed in LOCALBASE not LINUXBASE
* Ignore on the package buildersantoine2015-09-051-0/+4
| | | | Reported by: pkg-fallout
* comms/qt5-serialport:makc2015-09-041-1/+2
| | | | | | | - Fix misused PLIST substitution - Add missing files for WITH_DEBUG build Submitted by: Ralf Nolden <nolden@kde.org> via kde-freebsd maillist
* Replace devel/cppunit with devel/cppunit113.jkim2015-09-021-0/+1
| | | | Approved by: bdrewery (maintainer)
* New port: comms/hackrfpi2015-08-317-0/+107
| | | | | | | | | | | | | | HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 10 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. WWW: https://greatscottgadgets.com/hackrf/ PR: 199281 Submitted by: Tomek CEDRO <cederom@tlen.pl> Reviewed by: Nicolas Blais <nicblais@clkroot.net>
* comms/ncid: 1.0 -> 1.1pi2015-08-293-10/+12
| | | | | PR: 202721 Submitted by: Carlos J Puga Medina <cpm@fbsd.es> (maintainer)
* - Bump PORTREVISION after libzip updatemakc2015-08-283-0/+3
|
* - Update to 3.1p0amdmi32015-08-276-23/+42
| | | | | | PR: 200245 Submitted by: johan@stromnet.se (maintainer) Reported by: admin@lissyara.su
* Fix GSSAPI related (wrongly removed in previous commit).kuriyama2015-08-234-0/+68
| | | | | PR: ports/202278 Submitted by: peter
* Consistently spell out ONLY_FOR_ARCHS_REASON due to SSE (and other SIMDdanfe2015-08-231-2/+2
| | | | | | | | | | instructions) use. Particularly, saying "SSE extensions" is superfluous, as SSE abbreviation itself means "Streaming SIMD Extensions". Correct way to refer to particular (CPU-agnostic) technology is "SIMD instruction set", which is not limited to MMX, SSE family, AVX, NEON, etc. Since "instruction set" looks a bit too formal in the option description, use more casual and shorter word "instructions".
* - Split ghostscript into X11-independent and -dependent parts:hrs2015-08-233-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * print/ghostscript{7,8,9,9-agpl}-base Installs Ghostscript binary, libgs, and related files. These ports do not depend on X11 libraries (i.e. x11* devices are not available). USES=ghostscript will set dependency on one of them depending on GHOSTSCRIPT_DEFAULT. The default device is set to "display" or "bbox". * print/ghostscript{7,8,9,9-agpl}-x11 Installs a shared library which provides X11 support to the installed Ghostscript binaries. x11* devices will be enabled when the library is available. This depends on *-base (RUN_DEPENDS). USES=ghostscript:x11 will set dependency on one of them. - Fix integer overflow reported as CVE-2015-3228. - Update Uses/ghostscript.mk: * Add x11 keyword. nox11 keyword is now obsolete. * Use packagename in *_DEPENDS line to prevent relationship between -base and -x11 packages from being broken. - Fix x11/nox11 keyword and bump PORTREVISION in ports using USES=ghostscript to update dependency of pre-compiled packages.
* Remove debugging echodb2015-08-201-2/+1
| | | | Actually use correct dependancy for kvasd
* - Fix buildacm2015-08-201-2/+3
|
* Fix previous commit.mat2015-08-191-1/+1
| | | | | Pointy hat to: mat Sponsored by: Absolight
* Convert ports to use the options helpers in categories [abc]*, and minor fixes.mat2015-08-1927-286/+120
| | | | | Sponsored by: Absolight Differential Revision: https://reviews.freebsd.org/D3412?
* Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.rakuco2015-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Instead of defining a variable that is almost always based on CONFIGURE_ENV, just use CONFIGURE_ENV directly. This also matches the behavior of other ports that do not use autotools (so most ports can just worry about CONFIGURE_ENV). Additionally, the fact that we do not use ?= means we do not have problems if another file in Uses/ needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to USES would matter). Ports which set CMAKE_ENV have been adjusted accordingly. In most cases, CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being: * databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has no effect on the build system. * devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already retrieved from the CMAKE_CXX_COMPILER variable in the build system. * graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there has no effect on the build system. Reviewed by: makc Differential Revision: https://reviews.freebsd.org/D3403
* Disable ccache since a submake explicitly discards the enivronment.shurd2015-08-181-1/+2
| | | | Reported by amdmi3@
* Unbreak wsjtdb2015-08-1711-6266/+260
| | | | | Current head python code uses python3 so update to reflect that both wsjt and the upcoming wsjtx port rely upon Linux binary kvasd
* Last update was causing pollution of BUILD_DEPENDS into RUN_DEPENDSfeld2015-08-171-3/+4
| | | | PR: 202338
* - Fix build by adding missing dependencyamdmi32015-08-171-0/+1
| | | | Approved by: portmgr blanket
* Fix build - perl used during build.shurd2015-08-161-1/+2
|
* Add missing RUN_DEPENDSfeld2015-08-151-5/+6
| | | | | | Sort USES PR: 202338
* Remove the DEBUG option.shurd2015-08-151-4/+2
|
* Update to version 1.0shurd2015-08-152-40/+20
| | | | | Clean up Makefile to use new options format Remove incorrect INSTALLS_ICONS usage
* Update to 3.4shurd2015-08-154-8/+7
| | | | Use makepatch for files/*
* Update to 3.4.2 (also updates comms/xcwcp).shurd2015-08-154-8/+8
| | | | Use makepatch for files/*
* Update to 3.7.4shurd2015-08-152-4/+3
| | | | | | | Major changes since 3.6.22: - Added support for the HermesLite radio. - Add repeater offset and CTCSS tone to favourites screen. - Support for full-screen mode.
* Update to 8.2.12shurd2015-08-1519-55/+52
| | | | Maintenance release.
* Update to 3.22.13, fix portlint warnings.shurd2015-08-153-6/+18
| | | | | | | | | | | This release adds the FSQ modem. Fix the following two portline warnings: WARN: Makefile: [25]: the options to USES are not sorted. Please consider sorting them. WARN: Makefile: you should only use ".if ${PORT_OPTIONS:MDOCS}" to wrap installation of files into /usr/local/share/doc if the collection of files is large and it takes considerable time to copy.
* kvasd is a binary Linux common driver program used by wsjt and wsjtxdb2015-08-135-0/+56
|
* - editors/lazarus update to 1.4.2acm2015-08-091-2/+2
| | | | | | | | | | - Add USE_FPC_RUN to bsd.fpc.mk. It add fpc units like run dependencies. Otherwise fpc units only are added like build dependencies (less dependencies registered when they are installed with pkg). - Remove GTK1 obsolete dependencies - Bump all ports with dependencies of fpc-* units - Bump all ports with dependencies of lazarus ports - Clean up
* Horde package update:mm2015-08-032-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.28.5 -> 2.28.6 devel/pear-Horde_Alarm 2.2.4 -> 2.2.5 security/pear-Horde_Auth 2.1.8 -> 2.1.10 www/pear-Horde_Browser 2.0.9 -> 2.0.10 archivers/pear-Horde_Compress 2.1.2 -> 2.1.3 devel/pear-Horde_Core 2.20.5 -> 2.20.8 security/pear-Horde_Crypt 2.5.3 -> 2.6.0 www/pear-Horde_Css_Parser 1.0.6 -> 1.0.7 devel/pear-Horde_Data 2.1.2 -> 2.1.3 devel/pear-Horde_Date 2.1.0 -> 2.1.1 devel/pear-Horde_Exception 2.0.5 -> 2.0.6 www/pear-Horde_Form 2.0.9 -> 2.0.11 devel/pear-Horde_History 2.3.4 -> 2.3.5 devel/pear-Horde_Icalendar 2.1.0 -> 2.1.1 graphics/pear-Horde_Image 2.3.1 -> 2.3.2 mail/pear-Horde_Imap_Client 2.29.0 -> 2.29.1 devel/pear-Horde_LoginTasks 2.0.4 -> 2.0.5 mail/pear-Horde_Mail 2.6.0 -> 2.6.2 mail/pear-Horde_Mime_Viewer 2.1.0 -> 2.1.1 security/pear-Horde_Perms 2.1.4 -> 2.1.5 devel/pear-Horde_Prefs 2.7.3 -> 2.7.4 net/pear-Horde_Rpc 2.1.4 -> 2.1.5 devel/pear-Horde_Serialize 2.0.3 -> 2.0.4 devel/pear-Horde_Support 2.1.3 -> 2.1.4 textproc/pear-Horde_Text_Filter 2.3.1 -> 2.3.2 devel/pear-Horde_Util 2.5.5 -> 2.5.6 sysutils/pear-Horde_Vfs 2.2.2 -> 2.3.0 www/horde-ansel 3.0.2 -> 3.0.3 ftp/horde-gollem 3.0.3 -> 3.0.4 www/horde-base 5.2.6 -> 5.2.7 mail/horde-imp 6.2.9 -> 6.2.10 mail/horde-ingo 3.2.5 -> 3.2.6 deskutils/horde-kronolith 4.2.8 -> 4.2.9 deskutils/horde-mnemo 4.2.6 -> 4.2.7 www/horde-passwd 5.0.2 -> 5.0.3 www/horde-trean 1.1.1 -> 1.1.2 mail/horde-turba 4.2.7 -> 4.2.8 mail/horde-webmail 5.2.7 -> 5.2.9 deskutils/horde-groupware 5.2.7 -> 5.2.9 www/horde-wicked 2.0.3 -> 2.0.4
* Part 1 of adding USE_GNOME=intltool to ports that require it.kwm2015-08-034-4/+4
| | | | | | | | The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and gtk30 don't pull intltool in anymore. PR: 201980 Exp-run by: antoine@
* - Switch to @sampleamdmi32015-07-312-17/+9
|
* Add aprsd to dialer group in GIDs so membership is automatically handledfeld2015-07-311-1/+1
|
* comms/aprsd: Modernize portfeld2015-07-307-241/+72
| | | | | | | | | | | USE_RC_SUBR USERS and GROUPS instead of custom script Unmute some install steps LICENSE The rc script now passes rclint Approved by: db Differential Revision: https://reviews.freebsd.org/D3104
* - Fix shebangsamdmi32015-07-301-2/+5
| | | | | Approved by: portmgr blanket MFH: 2015Q3 (blanket)
* - Fix shebangsamdmi32015-07-301-2/+3
| | | | | Approved by: portmgr blanket MFH: 2015Q3 (blanket)
* - Fix shebangsamdmi32015-07-301-2/+9
| | | | | | | - Fix script installation Approved by: portmgr blanket MFH: 2015Q3 (blanket)
* Update devel/doxygen to 1.8.10antoine2015-07-282-2/+2
| | | | | PR: 201365 exp-run: self
* Unbreak builddb2015-07-285-65/+61
| | | | | Portaudio cleanups remove obsolete USE_AUTOTOOLS= autoconf
* - Update to later version of gnuradiodb2015-07-2730-1970/+2158
| | | | | - fix build with portaudio - clang builtin's are conflicting with gnuradio so use USE_GCC for now
* comms/mlan3: minor fixesrobak2015-07-202-4/+3
| | | | | | | | - Fix missing protocol in MASTER_SITES - Fix text indentation in pkg-descr Submitted by: danfe Approved by: portmgr (blanket)
* comms/mlan3: fix BROKEN=unfetchablerobak2015-07-202-10/+6
| | | | | | | | | - Adjust MASTER_SITES to fix BROKEN=unfetchable - Change maintainer to Chris Hutchinson <portmaster@bsdforge.com> - Correct WWW and text in pkg-descr PR: 199409 Submitted by: Chris Hutchinson <portmaster@bsdforge.com>
* Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.kwm2015-07-173-6/+3
| | | | | | | | | | Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection. Arguments supported: <empty>, build, run, nox11 and agpl PR: 201201 (exp-run) Approved by: portmgr (mat@) Exp run by: antione@ (previous patch) Differential Revision: https://reviews.freebsd.org/D2938
* Open source library for working with the National Marine Electronicsskreuzer2015-07-166-0/+67
| | | | | | | | | | | | | | | Association (NMEA) protocol. Features: * Analysis NMEA sentences and granting GPS data in C structures * Generate NMEA sentences * Supported sentences: GPGGA, GPGSA, GPGSV, GPRMC, GPVTG * Multilevel architecture of algorithms * Additional functions of geographical mathematics and work with navigation data WWW: http://nmea.sourceforge.net/
* - Fix shebangsamdmi32015-07-151-1/+4
| | | | | Approved by: portmgr blanket MFH: 2015Q3 (blanket)
* - Mark BROKEN: produces unusable libraryamdmi32015-07-021-0/+2
| | | | | | | | | | | | When attempling to link with libfec: /usr/local/lib/libfec.so: undefined reference to `find_cpu_mode' /usr/local/lib/libfec.so: undefined reference to `log' cc: error: linker command failed with exit code 1 (use -v to see invocation) PR: 200182 Submitted by: amdmi3 Approved by: maintainer timeout (olgeni, 7 weeks)
* Spell MAKE_JOBS_UNSAFE correctlyantoine2015-06-281-1/+1
|
* comms/rxtx: pass maintainer to submitterpgollucci2015-06-281-1/+1
| | | | | | 550 5.1.1 <mirror176@cox.net> invalid recipient Requested by: Submitter
* comms/rxtx: mutiple fixespgollucci2015-06-2812-18/+11692
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makefile 1) Missing dependancy on plibthread.so.1 Java code base 2) Added commandline debug output in multiple Java files 3) Tided comment statements, tabulation and white space to aid reading of sections of the original source code 4) Added additional debug statements to aid diagnosis in multiple Java files 5) Moved error logging from Zystem to be local in the RXTXPort.java file (was never firing from Zystem); now common with rest of codebase 6) Ensured that RXTX only outputs debug level information when requested. 7) Only enumerate the local ports on initialisation once (use of init_clean), rather than three times. 8) Updated ports lists to reflect current usage pre FreeBSD v10 and post v10. 9) Debug identifier inserted before all calls 10) correctly read the properties file when there are multiple java library paths 11) Enabled the skipping of parrellel ports during scans where they are not used by the invoking java parent base to RXTX (Still allows them to be manually specified in gn.io.parellel env arg) SerialImp.c 12) Tidied code indentation (where needed, it is a medium length file and doesn't provide benifit on areas that work) 13) Added standard out debug support to allow for assessment of interaction with Java code that can be compiled in (DEBUG_STDOUT) 14) Added entry and exist debug statement for key functions 15) where sprintf is being used, ensure that the existing ptr refers to an empty string (uses memset to sizeof) 16) cleared up display tabulation of function headers in entire file (on second enumeration strings contained garbage) 17) Remove LEAVE and ENTRY functions as not working as expected in header. 18) Made sure all debug statements are null pointer terminated (note sprintf is not solely used for debug message formatting) 19) Added condition so that a port that is in use during testread() is still reported as selectable. (If you attempt to open it after the port scan and it is still EBUSY the behaviour is unaltered and will throw a suitable error back) 20) Disabled uucp for lpt ports, as uucp only applies to tty on FreeBSD (so says the Handbook...) 21) RXTXPort:interruptEventLoop - resolved SIGABRT call to process (intended to kill off thread not entire JRE)... 22) RXTXPort:interruptEventLoop now waits for timer in child thread to expire before attempting to closing the thread (delay between 0 and 1000000 sleeps) 23) All debug streams for FreeBSD now forward to same function for uniform formatting. This fixes two downstream issues in the arduino port, which results in missing dependancies, a core dump when uploading, or very slow port enumeration (up to 30s in some cases) when the arduino IDE is first started. PR: 200179 Submitted by: james@elstone.net Approved by: maintainer timeout (mirror176@cox.net ; 45 days)
* - Mark BROKEN on 9.x:amdmi32015-06-251-0/+2
| | | | | | | /wrkdirs/usr/ports/comms/gnuradio/work/gnuradio-3.7.4/volk/kernels/volk/volk_8u_x4_conv_k7_r2_8u.h:191: error: incompatible type for argument 1 of '__builtin_ia32_psrlqi128' Approved by: portmgr blanket Reported by: pkg-fallout
* Convert to USES=jpegantoine2015-06-232-4/+2
|
* All directory handling is now automatic: cleanup plistbapt2015-06-213-148/+1
|
* Horde package update:mm2015-06-192-3/+3
| | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.28.4 -> 2.28.5 devel/pear-Horde_Core 2.20.4 -> 2.20.5 devel/pear-Horde_Icalendar 2.0.11 -> 2.1.0 mail/pear-Horde_Imap_Client 2.28.1 -> 2.29.0 www/horde-base 5.2.5 -> 5.2.6 mail/horde-imp 6.2.8 -> 6.2.9 deskutils/horde-kronolith 4.2.7 -> 4.2.8 deskutils/horde-nag 4.2.4 -> 4.2.5 mail/horde-turba 4.2.6 -> 4.2.7 mail/horde-webmail 5.2.6 -> 5.2.7 deskutils/horde-groupware 5.2.6 -> 5.2.7
* - Fix build on CURRENTamdmi32015-06-181-0/+2
| | | | | | | | In base revision r281198, sockaddr_l2cap structure was changed, and an #error which fires by default was added as a safety measure to make sure all structure consumers are updated to initialize new fields. This port, however, doesn't seem to use this structure, so it should be safe to just disable the error.
* - Fix shebangsamdmi32015-06-171-2/+3
|
* - Fix configure when both X11 and SMSD options are off [1]madpilot2015-06-159-33/+32
| | | | | | | (this port always requires glib20) - While here regenerate patches to silence portlint warnings Reporterd by: Marc van Houtum <marc at dutchsecurity.net> (by email) [1]
* - Bump PORTREVISION. lazarus was updated to 1.4.0acm2015-06-151-1/+2
|
* - Upgrade to 8.2.1.kuriyama2015-06-135-87/+8
|
* Reset dhn's portserwin2015-06-132-2/+2
| | | | | | PR: 197522 Submitted by: jbeich Approved by: portmgr
* - Update libplist to 1.12.avilla2015-06-1110-23/+26
| | | | | | | | | | - Update libusbmuxd to 1.0.10. - Update libimobiledevice to 1.2.0. - Update usbmuxd to 1.1.0. This marks an important milestone with proper iOS 8 support that is packed with new features, tools, speed improvements, code refactoring, crash fixes, memory leak fixes and much more.
* Horde package update:mm2015-06-112-3/+3
| | | | | | | | | | | comms/pear-Horde_ActiveSync 2.27.1 -> 2.28.4 devel/pear-Horde_Core 2.20.0 -> 2.20.4 security/pear-Horde_Crypt_Blowfish 1.0.3 -> 1.1.0 devel/pear-Horde_Date 2.0.13 -> 2.1.0 mail/pear-Horde_Imap_Client 2.28.0 -> 2.28.1 mail/pear-Horde_Mime 2.9.0 -> 2.9.1 security/pear-Horde_Share 2.0.6 -> 2.0.7 deskutils/horde-kronolith 4.2.6 -> 4.2.7
* Fix LIB_DEPENDSantoine2015-06-082-2/+2
|
* Update concordance and associated libraries to ver 1.2shurd2015-06-067-13/+13
| | | | Require the same PORTVERSION on the libs as the binary.
* - Add NO_ARCHsunpoet2015-06-041-0/+1
|
* Update to 3.22.10shurd2015-06-022-4/+3
| | | | Maintenance/bugfix release.
* Cleanup USE_GITHUB usage.mat2015-05-312-3/+3
| | | | | With hat: portmgr Sponsored by: Absolight
* Update portaudio to v19/Remove portaudio2 [1]bapt2015-05-3115-106/+24
| | | | | | | | | Chase portaudio change Add patches from debian for games/cultivation Add patches from upsteam for audio/rezound Mark py-fastaudio as broken Approved by: maintainer
* Create at least a bit more proper libraries:bapt2015-05-302-1/+2
| | | | | | | | | - run ranlib on the static library - give a soname to the shared library - make the real file the the library with a version in the name - make the .so the symlink Bump portrevision for the ports using the library
* - Fix shebangsamdmi32015-05-291-2/+6
| | | | | | | - Add NO_ARCH Approved by: portmgr blanket MFH: 2015Q2
* - Add LICENSEsunpoet2015-05-282-1/+4
| | | | - Update WWW
* Upgrade to 1.9.0shurd2015-05-2714-78/+70
| | | | | | | | | - Switch to USE_GITHUB - Use OPT_* instead of .if blocks - Switch to makepatch format PR: 200318 Submitted by: takefu@airport.fm
* - Don't cat pkg-message from Makefilesamdmi32015-05-271-1/+0
| | | | Approved by: portmgr blanket
* - Remove unneeded executables (bin/console and bin/testserver)sunpoet2015-05-242-2/+2
| | | | | | | | | - Remove CONFLICTS_INSTALL - Remove rubygem-gitlab-grack from CONFLICTS_INSTALL of comms/conserver* - Bump PORTREVISION for package change Differential Revision: https://reviews.freebsd.org/D2625 Submitted by: mmoll
* - Update to 2.0.2sunpoet2015-05-232-0/+4
| | | | | | | - Add LICENSE - Mark CONFLICTS_INSTALL among comms/conserver, comms/conserver-com and www/rubygem-gitlab-grack Changes: https://github.com/gitlabhq/grack/blob/master/CHANGELOG
* Remove $FreeBSD$ from patches files in categories a-j.mat2015-05-2214-36/+1
| | | | | With hat: portmgr Sponsored by: Absolight
* MASTER_SITES cleanup.mat2015-05-1446-91/+48
| | | | | | | | | | | | | | | | | | | - Replace ${MASTER_SITE_FOO} with FOO. - Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9% of the time.) - Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and no hint of what it should be was present. - Fix some logic. - And generally, make things more simple and easy to understand. While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and SAMBA macros. Also, replace some EXTRACT_SUFX occurences with USES=tar:*. Checked by: make fetch-urlall-list With hat: portmgr Sponsored by: Absolight
* Upstream tarball re-rolled. Minor comment and documentation changes.shurd2015-05-121-2/+2
|
* Fix MASTER_SITE_LOCALshurd2015-05-121-1/+1
|
* - Add CPE infoamdmi32015-05-121-1/+3
| | | | Approved by: portmgr blanket
* - Add CPE infoamdmi32015-05-121-1/+1
| | | | Approved by: portmgr blanket
* Cleanup DIST* variables.mat2015-05-122-2/+1
| | | | | | | | | | | When appropriate: - Try to use DISTVERSION{SUF,PRE}FIX - Replace PORTNAME-PORTVERSION by DISTNAME - Convert MASTER_SITES to use macros - Other light cleanup With hat: portmgr Sponsored by: Absolight
* Get portaudio2 dependencies right since libs are not in ${LOCALBASE}/libdb2015-05-112-5/+4
| | | | Clean up LOCAL slightly
* Add patch to fix OSS support (bump PORTREVISION)shurd2015-05-1117-104/+94
| | | | | | | | Switch to Options-NG. Use makepatch for patchs. PR: 200039 Submitted by: takefu@airport.fm
* Update to 1.2.1db2015-05-1012-352/+50
| | | | | PR: ports/200043 Submitted by: takefu@airport.fm
* Reassign to perl@.adamw2015-05-091-1/+1
|
* - Don't install static libraries with INSTALL_LIB (part 1/2)amdmi32015-05-081-1/+2
| | | | | Approved by: portmgr blanket MFH: 2015Q2
* - Add missing file (%%DATADIR%%/cfg-data/Server-mode/smplayer2.cfg) to plistamdmi32015-05-082-492/+495
| | | | | | | | - Sort plist - Add LICENSE_FILE Approved by: portmgr blanket MFH: 2015Q2
* comms/seyon: update to 2.20cjbeich2015-05-084-19/+26
| | | | | - Switch to Debian distfile - Unbreak make -jN build
* Unbreak comms/qtel slave portantoine2015-05-081-0/+1
|
* Update ports in the [bcd]* categories to not use GH_COMMIT.mat2015-05-0614-29/+19
| | | | | | | With minor cleanups to make things simpler. With hat: portmgr Sponsored by: Absolight
* - Fix unfetchable and unbreakwen2015-05-061-2/+1
| | | | | PR: 199577 Submitted by: craig001@lerwick.hopto.org(maintainer)
* comms/usbmuxd: unbreak build on 10.2R and 11.0Cjbeich2015-05-051-0/+25
| | | | | | | | | | Try to autodetect ppoll(2) instead of hardcoding the list of platforms lacking it thus using fallback. GitHub: libimobiledevice/usbmuxd#36 PR: 199545 Reported by: pkg-fallout Approved by: maintainer timeout (2 weeks)
* Add bin/locator to plist.shurd2015-05-031-0/+1
| | | | Silences check-orphans complaint.
* Update to latest release.shurd2015-05-032-3/+3
|
* Add dependency on libfftw3.so.shurd2015-05-031-4/+3
| | | | | PR: 199412 Submitted by: takefu@airport.fm
* Update to latest version.shurd2015-05-032-3/+3
| | | | | | | | - Adds FreeDV support - Mouse wheel changes frequency - Configurable hamlib IP address - New IMD right-click menu - Spot can now transmit 0 amplitude carrier for noise testing
* Update to latest revision.shurd2015-05-034-138/+3
| | | | Upstream has stopp redistributing the docs again.
* Update to latest revision.shurd2015-05-033-3/+13
|
* Update to latest versionshurd2015-05-034-14/+14
|
* Update to latest version.shurd2015-05-037-44/+13
| | | | Note, fldigi-shell has been removed upstream.
* Fix linrad on latest gccdb2015-05-0215-72/+103
| | | | | | | | | | | | | | | | | | | I checked linrad upstream, and they still haven't fixed these two bugs. I am surprised they haven't been reported yet. Without these fixes, linrad cannot be built with gcc5. the menu.c patch simply reverses the order of the condition. One must check the bounds constraint first! It's a pretty dumb mistake but I've seen this kind before. The second one fails because -Werror is set. This took me a while because I couldn't figure out the relationship between ADCHANS and rxchan. In any case, setting 4 locations per channel did indeed allow the array to be big enough. (at first I thought the loop was running too high, but I finally determined the array was too small). These were found on DragonFly that uses gcc5. This patch has not been tested on FreeBSD but I can't how it could possibly fail. It would be good if the ham@ maintainer reports the issue upstream. Updated patch files using make makepatch PR: ports/199737 Submitted by: marino
* Horde package update:mm2015-05-012-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.27.0 -> 2.27.1 devel/pear-Horde_Argv 2.0.10 -> 2.0.11 security/pear-Horde_Auth 2.1.7 -> 2.1.8 devel/pear-Horde_Autoloader 2.1.0 -> 2.1.1 www/pear-Horde_Browser 2.0.8 -> 2.0.9 mail/pear-Horde_Mail 2.5.1 -> 2.6.0 mail/pear-Horde_Mapi 1.0.4 -> 1.0.5 mail/pear-Horde_Mime 2.8.1 -> 2.9.0 textproc/pear-Horde_Pdf 2.0.4 -> 2.0.5 security/pear-Horde_Perms 2.1.3 -> 2.1.4 devel/pear-Horde_Prefs 2.7.2 -> 2.7.3 devel/pear-Horde_Rdo 2.0.3 -> 2.0.4 www/pear-Horde_Routes 2.0.3 -> 2.0.4 mail/pear-Horde_Smtp 1.9.0 -> 1.9.1 devel/pear-Horde_Support 2.1.2 -> 2.1.3 textproc/pear-Horde_Text_Filter 2.3.0 -> 2.3.1 devel/pear-Horde_Tree 2.0.3 -> 2.0.4 devel/pear-Horde_View 2.0.4 -> 2.0.5 textproc/pear-Horde_Xml_Element 2.0.2 -> 2.0.3 www/horde-base 5.2.4 -> 5.2.5 mail/horde-imp 6.2.7 -> 6.2.8 mail/horde-ingo 3.2.4 -> 3.2.5 deskutils/horde-kronolith 4.2.5 -> 4.2.6 deskutils/horde-mnemo 4.2.5 -> 4.2.6 mail/horde-turba 4.2.5 -> 4.2.6 mail/horde-webmail 5.2.5 -> 5.2.6 deskutils/horde-groupware 5.2.5 -> 5.2.6
* Quisk Version 3.6.21 March 2015db2015-04-302-4/+4
| | | | | | | | | | | | | | | | | | | | | | =============================== Quisk can now transmit a message from a WAV file. Record your message at a high level (near clipping) at 48 ksps, 16-bit, one channel (monophonic). Then enter the file name on the Config/Config screen. Press the "File play" button to transmit. Quisk will press the PTT button for you, and release it during pauses. To interrupt playback, press PTT or release FilePlay so you can answer. The "Split" button has been replaced with a "Splt" button and a "Rev" button. The "Splt" button splits Rx and Tx; and if you click it with the right mouse button instead of the left, it also locks the Tx frequency so tuning changes the Rx frequency. The "Rev" button reverses the Tx and Rx frequencies. These features were suggested by Mario, DH5YM. I added a new parameter mic_agc_level to the config file to control the mic AGC. Input levels below mic_agc_level are ignored. The default is 0.1. Increase this (up to 1.0) to reduce the AGC range, and reduce it to increase the AGC mic gain boost. Philip Lee contributed a patch to the PulseAudio code to set the play buffer size. Prompted by: portscout
* USE_GITHUB: For the new support, fix DISTNAME to be more consistent.bdrewery2015-04-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | When using GH_TAGNAME the DISTNAME would have GH_PROJECT and GH_ACCOUNT in it. When not using GH_TAGNAME it would not have this. Now both cases will add in the GH_PROJECT and GH_ACCOUNT. Add special care to ensure that the DISTVERSION is not added in twice. If a port does GH_TAGNAME=v${PORTVERSION} it will be added in twice though. For that case DISTVERSIONPREFIX=v should be set and no GH_TAGNAME should be used. empty() is used rather than (!defined || !${}) to support fmake. The purpose of setting DISTNAME at all in these cases is to make it more clear that the distfile is from *GITHUB* and to avoid collisions if a project were to be renamed or moved. Without adding in GH_PROJECT and GH_ACCOUNT then there are real risks that collisions on filenames would happen on renamed or moved projects, which is fairly common. A GITHUB-generated file may not match a custom-rolled or git-archive-rolled distfile. PR: 199069 With hat: portmgr Testing done: All USE_GITHUB ports without GH_COMMIT were checksum/fetch/extract/WRKSRC tested.
* Fix build on 10 and HEADdb2015-04-291-0/+10
|
* Update to latest 1.3.22db2015-04-273-13/+3
| | | | Upstream changes to XML code and addition of K3/KX3 bandwidth control
* Make fetchable again, unbreak with Perl 5.21.0+.mat2015-04-252-5/+4
| | | | | | The difference in the distfiles is a regenerated META.yml and an added META.json. Sponsored by: Absolight
* - Update to 2.0.13danilo2015-04-232-3/+3
|
* converters/libiconv:tijl2015-04-154-33/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove const qualifier from iconv(3) to match POSIX: http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html - Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is defined because the base system iconv supports these extensions too. Add/remove patches to/from ports to call iconv with non-const arguments. This breaks some ports on FreeBSD 10 because base system iconv.h still has the const qualifier. Fix this by letting USES=iconv add a build dependency on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG defined) instead of the base system iconv.h. This exposed some ports that link with libiconv when it is available instead of using libc iconv. In these cases one of the following changes has been made: - patch configure scripts to test for libc iconv first - add ac_cv_lib_iconv_libiconv=no or similar to CONFIGURE_ARGS to disable some configure tests - converters/wkhtmltopdf: this includes Qt4 so add a patch from devel/qt4 - lang/gcc5-aux: respect CFLAGS and friends during configure such that LIBICONV_PLUG is defined in the iconv test, also switch to external gettext - mail/gnarwl: replace patches with CPPFLAGS/LIBS - multimedia/ffmpeg2theora: remove iconv test from SConstruct and use ICONV_LIB in port Makefile instead, also fix a bug in subtitles.c - net-im/licq: finish conversion to cmake - net-mgmt/bandwidthd, net-mgmt/icinga, net-mgmt/nagios, net-mgmt/nagios4: don't need iconv - textproc/p5-XML-TinyXML: finish conversion to USES=perl5 Other changes: - databases/qdbm and slaves: respect CFLAGS and friends, also enable bzip2 and lzo support - games/ldmud: respect CFLAGS and friends - graphics/inventor: replace some patches with MAKE_ARGS/MAKE_ENV to respect CFLAGS and friends, also remove FreeBSD/alpha patch and add missing xorg dependencies PR: 199099 Exp-run by: antoine Approved by: portmgr (antoine)
* - Unbreak (no more CSME sites), switch to sf.net (upstream) at the expensedanfe2015-04-133-10/+29
| | | | | | | | | | | | | of losing normal distfile name and having to set WRKSRC; contents remain the same (and so does the checksum) - Define LICENSE (GPLv2); install README file as part of documentation - Unmute building and installation commands while here - Fix one warning revealed by Clang (missing bzero(3) prototype), yet two others remain) - Transfer maintainership to the submitter PR: 199322 Submitted by: Chris Hutchinson
* Mark BROKEN: fails to configureantoine2015-04-121-0/+2
| | | | | | | | | | | checking for sfftw_destroy_plan_ in -lfftw3f... yes checking for stdarg.h... (cached) yes You need to install the fftw3 libraries You are missing the fftw3.h include file configure: error: Please check error messages and install missing packages. ===> Script "configure" failed unexpectedly. Reported by: pkg-fallout
* comms/birda: Unbreak fetch by adjusting MASTER_SITESmarino2015-04-111-3/+1
| | | | | PR: 199270 Submitted by: maintainer (mjl - lucky.org.nz)
* Unbreak these by mirroring distfiles on MASTER_SITE_LOCAL.nox2015-04-112-6/+4
|
* comms/dfu-utils: Unbreak fetchmarino2015-04-091-2/+1
| | | | | | | | The exact missing distfile is hosted at sourceforge.net, but not in the usual mirrored file area. The SF magic doesn't work, so I used a hard link to restore the port. Approved by: blanket
* - Unbreak build using new distribution sitesdb2015-04-083-41/+18
| | | | | - clean up a few nits - remove unnecessary file
* - Fix nits found with portlintdb2015-04-082-10/+9
| | | | | - add backup distribution - fix bad distinfo
* Unbreakdb2015-04-082-3/+2
| | | | upstream distfile had been re-rolled causing fetch failuresd
* comms/dump1090_mr: fix build, fix path to html filesswills2015-04-072-5/+11
| | | | Approved by: rpaulo (maintainer)
* Unbreak flrigdb2015-04-072-5/+4
| | | | | | | | | | | | | | | | | | | | | | From flrigh Changelog =Version 1.3.21= 2015-03-27 David Freese <iam_w1hkj@w1hkj.com> d4f4f36: KX3 45dc545: K3 update 1f086c2: FSF address =Version 1.3.20= 399b37b: TT550 update 6739d81: fix ab ad9bc7e: Rig server 3bdebb6: no xmlrpc_c io 179392e: ts2000 update 418fe19: FT950 962b96c: xmlrpc timing
* - Update to upstream version 1.4.4riggs2015-04-063-13/+12
| | | | | | | | | - Update MASTER_SITES, MAINTAINER, COMMENT - Add missing WWW in pkg-descr - Pet portlint; general cleanup PR: 198568 Submitted by: portmaster@bsdforge.com (maintainer)
* Mark as broken unfetchable portsbapt2015-04-0616-0/+19
|
* The port in comms/xastir is version 2.0.4 from 2012. A release 2.0.6 wasdb2015-04-053-4/+9
| | | | | | | | | | | | | | released in 2014. The release has only minor changes, but among them is the ability to link against BDB 5.x instead of being restricted to 4.x. Since the current port has "WITH_BDB_HIGHEST" set to true, the highest available is now 5.x, and the 2.0.4 would not work with 5.x, this alone is reason to update. I've pinged Carl several times and committing this fix anyway but will email Carl again as a courtesy. PR: ports/198872 Submitted by: russo@bogodyn.org
* add 'USES=shebangfix' to fix 'usermgmt.cgi' script.db2015-04-053-24/+14
| | | | | PR: ports/199056 Submitted by: takefu@airport.fm
* New port: comms/dump1090_mr:rpaulo2015-04-056-0/+81
| | | | | | | | | Dump1090 MR is a FlightAware fork of Malcolm Robb's fork of Salvatore Sanfilippo's dump1090 program. FlightAware uses it as an important element of PiAware (https://flightaware.com/adsb/piaware/). Reviewed by: bapt Approved by: bapt
* Horde package update:mm2015-04-042-3/+3
| | | | | | comms/pear-Horde_ActiveSync 2.26.1 -> 2.27.0 archivers/pear-Horde_Compress 2.1.0 -> 2.1.1 textproc/pear-Horde_Text_Filter 2.2.2 -> 2.3.0
* Remove OSVERSION checks that do not make sense any more.mat2015-04-032-6/+0
| | | | | | | | | | For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true, as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107). Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when it is always needed, I renamed it, in one case, I merged two patches. Differential Revision: https://reviews.freebsd.org/D2209
* Remove dead mirrorbapt2015-03-311-0/+1
|
* 2 ports categories: Remove $PTHREAD_LIBSmarino2015-03-2514-126/+44
| | | | | | | | | | Categories: net-p2p, comms Note that qrq was not properly staged, it failed stage-QA. aprsd failed check-plist; it had a plist orphan. Now it fails stage-QA with a fs violation, but it may be acceptable. Fixes added to both. approved by: PTHREAD blanket
* Make fonts repecting XDGbapt2015-03-222-3/+3
| | | | | | | | | | Xorg is now looking in ${LOCALBASE}/share/fonts by default Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1)) Large cleanup on lots of font ports All fonts are now properly dynamically generating fonts.dir and fonts.scale instead of sometime overwriting existing ones) All fonts are generating fontconfig's cache Improve consistency in fonts ports
* Update USE_GITHUB so it does not require GH_COMMIT.bdrewery2015-03-201-1/+1
| | | | | | | | | | | | | | | | | Using this new scheme allows only setting the _tag_ or _commit hash_ in GH_TAGNAME and not having to know the hash for a tag. This scheme will download a tarball that has a different checksum than before due to a changed directory name for extraction. The following MASTER_SITES are provided to retain the old checksum and directory structure (that require GH_COMMIT): GH -> GHL GITHUB -> GITHUB_LEGACY Differential Revision: https://reviews.freebsd.org/D748 Submitted by: amdmi3 Reviewed by: mat, swills, antoine, bdrewery With hat: portmgr
* Fix broken pkg-plistdb2015-03-142-15/+87
|
* Some OCD cleanups on some of the perl@ ports.adamw2015-03-133-8/+8
| | | | | | | | | | | | | - Remove dependencies in core - Put testing depends in TEST_DEPENDS - Remove unnecessary bsd.port.options.mk inclusions - Remove checks for Perl versions that no longer exist in the ports tree - Sort plists, some of which were so jumbled that I have to assume the plist was randomized before committing A lot of the plist changes in this commit are moving PERL5_MAN3 after SITE_PERL. It's repo churn now, but it makes updating the ports later far easier.
* - Update MAINTAINER: use @FreeBSD.orgsunpoet2015-03-132-2/+2
|
* Horde package update:mm2015-03-122-3/+3
| | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.26.0 -> 2.26.1 devel/pear-Horde_Core 2.19.0 -> 2.19.2 security/pear-Horde_Group 2.0.4 -> 2.0.5 databases/pear-Horde_HashTable 1.2.2 -> 1.2.3 www/pear-Horde_Http 2.1.3 -> 2.1.4 mail/pear-Horde_Imap_Client 2.26.1 -> 2.27.0 mail/pear-Horde_Mime 2.7.0 -> 2.8.0 mail/pear-Horde_Smtp 1.8.0 -> 1.9.0 net/pear-Horde_Socket_Client 1.1.2 -> 2.0.0 devel/pear-Horde_Util 2.5.3 -> 2.5.4
* Update KDE SC to 4.14.3alonso2015-03-121-2/+2
| | | | | | | | | | | | | | | | The kde@ team presents KDE SC 4.14.3, the last planed release of the KDE SC 4 series. In addition to the updates provided by the KDE SC developers, this update also addresses numerous FreeBSD and PORTS specific issues, found and solved by the kde@ team and area51 testers, most notorously Tobias C. Berner <tcberner@gmail.com> PR: 197751 PR: 197871 PR: 184996 Reviewed by: rakuco (mentor) Differential: https://reviews.freebsd.org/D1950
* Finally unbreak the build by preloading GCC_DEFAULT libs paths.db2015-03-111-0/+3
| | | | | | | It is complicated by the intermix of gcc and gfortran libs being intermixed with system libs. Especially by dynamically loaded modules into python being linked against gfortran or current gcc. I realise using GCC_DEFAULT lib paths is not a general solution.
* gmake:lite is only intended to be used for possible gmake dependenciesantoine2015-03-071-1/+1
|
* Dump 1090 is a Mode S decoder specifically designed for RTLSDR devices.skreuzer2015-03-055-0/+80
| | | | | | | | | | | | | | | | | | | | | The main features are: * Robust decoding of weak messages. * Network support: TCP30003 stream (MSG5...), Raw packets, HTTP. * Embedded HTTP server that displays the currently detected aircrafts on Google Map. * Single bit errors correction using the 24 bit CRC. * Ability to decode DF11, DF17 messages. * Ability to decode DF formats like DF0, DF4, DF5, DF16, DF20 and DF21 where the checksum is xored with the ICAO address by brute forcing the checksum field using recently seen ICAO addresses. * Decode raw IQ samples from file (using --ifile command line switch). * Interactive command-line-interfae mode where aircrafts currently detected are shown as a list refreshing as more data arrives. * CPR coordinates decoding and track calculation from velocity. * TCP server streaming and receiving raw data to/from connected clients. WWW: https://github.com/antirez/dump1090
* - Add LICENSEamdmi32015-03-032-1/+4
| | | | - Fix typo in Makefile which leads to extra file installation
* Remove Authors from pkg-descrbapt2015-03-033-4/+0
|
* Horde package update:mm2015-03-022-3/+3
| | | | | comms/pear-Horde_ActiveSync 2.24.1 -> 2.26.0 archivers/pear-Horde_Compress 2.0.8 -> 2.1.0
* - Simplify MASTER_SITESamdmi32015-03-013-11/+12
| | | | | | | - Fix installation from non-root - Fix binary permissions MFH: 2015Q1
* Fix DESKTOP_ENTRIES:makc2015-02-281-2/+2
| | | | | | - Icon field must be either absolute path or icon name if installation follows Icon Theme Specification - Remove invalid categories - StartupNotify field must be literally false/true, not ${FALSE}/${TRUE}
* Improve previous commit: Fix unused bug and disable Werror while herearved2015-02-212-1/+17
| | | | Suggested by: marino
* Add -Wno-unused to prevent Werror from triggering with gcc48arved2015-02-211-1/+2
| | | | | PR: 197284 Submitted by: dewayne@heuristicsystems.com.au
* Horde package update:mm2015-02-112-3/+3
| | | | | | | | | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.24.0 -> 2.24.1 devel/pear-Horde_Alarm 2.2.3 -> 2.2.4 devel/pear-Horde_Core 2.18.3 -> 2.19.0 security/pear-Horde_Crypt 2.5.2 -> 2.5.3 databases/pear-Horde_HashTable 1.2.1 -> 1.2.2 graphics/pear-Horde_Image 2.1.0 -> 2.2.0 devel/pear-Horde_Prefs 2.7.1 -> 2.7.2 net/pear-Horde_Rpc 2.1.2 -> 2.1.3 devel/pear-Horde_Stream_Wrapper 2.1.1 -> 2.1.2 www/horde-ansel 3.0.1 -> 3.0.2 www/horde-base 5.2.3 -> 5.2.4 mail/horde-imp 6.2.6 -> 6.2.7 mail/horde-ingo 3.2.3 -> 3.2.4 deskutils/horde-kronolith 4.2.4 -> 4.2.5 deskutils/horde-mnemo 4.2.3 -> 4.2.4 deskutils/horde-nag 4.2.3 -> 4.2.4 mail/horde-turba 4.2.4 -> 4.2.5 devel/horde-whups 3.0.1 -> 3.0.2
* - Remove always true OSVERSION conditionamdmi32015-02-041-9/+4
| | | | | | | | - Don't cat pkg-message from Makefile - Simplify MASTER_SITES - Add LICENSE_FILE Approved by: portmgr blanket
* Add support for HanfTek DVB-Tmartymac2015-02-032-1/+11
| | | | | PR: 197272 Submitted by: skreuzer
* Update to 1.1.9, change maintainer to hamradio@shurd2015-01-272-5/+4
|
* Add patch to allow building with an external toolchain.shurd2015-01-261-0/+11
| | | | | PR: 196937 Submitted by: mikael.urankar@gmail.com
* Fix detection of libportaudio librariespawel2015-01-252-2/+2
| | | | | | PR: 196427 Submitted by: myself Approved by: hselasky, stephen, marcus, maintainer timeout from others
* Fix DEPENDSantoine2015-01-251-5/+4
|
* Fix some _DEPENDSantoine2015-01-251-1/+1
|
* Remove explicit dependency on javavmwrapper for ports that USE_JAVAantoine2015-01-241-2/+0
|
* Remove expired ports:rene2015-01-175-211/+0
| | | | | | 2015-01-13 x11/rxvt-devel: No longer developed nor maintained and deprecated by x11/xvt and x11/rxvt-unicode 2015-01-15 comms/spandsp-devel: Use newer comms/spandsp 2015-01-16 multimedia/universal-media-server: "RC script broken, especially prestart target"
* Update to 0.9.0.3, minor bugfixes and new features.shurd2015-01-152-3/+3
|
* Add missing USE_OPENSSL=yestijl2015-01-151-1/+2
| | | | PR: 195796
* Horde package update:mm2015-01-122-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.23.1 -> 2.24.0 devel/pear-Horde_Argv 2.0.9 -> 2.0.10 security/pear-Horde_Auth 2.1.5 -> 2.1.6 devel/pear-Horde_Cli 2.0.5 -> 2.0.6 archivers/pear-Horde_Compress_Fast 1.0.3 -> 1.1.0 devel/pear-Horde_Constraint 2.0.1 -> 2.0.2 devel/pear-Horde_Controller 2.0.1 -> 2.0.2 devel/pear-Horde_Core 2.18.1 -> 2.18.3 security/pear-Horde_Crypt_Blowfish 1.0.2 -> 1.0.3 www/pear-Horde_Css_Parser 1.0.4 -> 1.0.5 devel/pear-Horde_Data 2.1.0 -> 2.1.1 devel/pear-Horde_Date 2.0.12 -> 2.0.13 devel/pear-Horde_Date_Parser 2.0.2 -> 2.0.3 devel/pear-Horde_Exception 2.0.4 -> 2.0.5 www/pear-Horde_Feed 2.0.2 -> 2.0.3 www/pear-Horde_Form 2.0.8 -> 2.0.9 databases/pear-Horde_HashTable 1.2.0 -> 1.2.1 www/pear-Horde_Http 2.1.2 -> 2.1.3 devel/pear-Horde_Injector 2.0.3 -> 2.0.4 devel/pear-Horde_Itip 2.0.6 -> 2.0.7 mail/pear-Horde_ListHeaders 1.2.0 -> 1.2.1 sysutils/pear-Horde_Log 2.1.0 -> 2.1.1 devel/pear-Horde_LoginTasks 2.0.3 -> 2.0.4 mail/pear-Horde_Mapi 1.0.3 -> 1.0.4 devel/pear-Horde_Nls 2.0.4 -> 2.0.5 devel/pear-Horde_Notification 2.0.1 -> 2.0.2 textproc/pear-Horde_Pdf 2.0.3 -> 2.0.4 security/pear-Horde_Perms 2.1.2 -> 2.1.3 devel/pear-Horde_Queue 1.1.1 -> 1.1.2 devel/pear-Horde_Rdo 2.0.2 -> 2.0.3 www/pear-Horde_Routes 2.0.2 -> 2.0.3 net/pear-Horde_Rpc 2.1.1 -> 2.1.2 devel/pear-Horde_Serialize 2.0.2 -> 2.0.3 security/pear-Horde_Share 2.0.5 -> 2.0.6 textproc/pear-Horde_SpellChecker 2.1.1 -> 2.1.2 devel/pear-Horde_Stream_Filter 2.0.2 -> 2.0.3 devel/pear-Horde_Stream_Wrapper 2.1.0 -> 2.1.1 devel/pear-Horde_Support 2.1.1 -> 2.1.2 www/pear-Horde_Template 2.0.1 -> 2.0.2 textproc/pear-Horde_Text_Diff 2.1.0 -> 2.1.1 textproc/pear-Horde_Text_Flowed 2.0.1 -> 2.0.2 devel/pear-Horde_Timezone 1.0.8 -> 1.0.9 devel/pear-Horde_Token 2.0.5 -> 2.0.6 devel/pear-Horde_Tree 2.0.2 -> 2.0.3 net/pear-Horde_Url 2.2.3 -> 2.2.4 sysutils/pear-Horde_Vfs 2.2.0 -> 2.2.1 textproc/pear-Horde_Xml_Element 2.0.1 -> 2.0.2 textproc/pear-Horde_Xml_Wbxml 2.0.1 -> 2.0.2
* Fix waterfall display (was previously disabled by the patch).shurd2015-01-122-4/+21
|
* Update to 3.22.05shurd2015-01-127-38/+5
| | | | | | | - Remove unnecessary patches. - Fix space placement errors in: files/patch-src_thor_thor.cxx files/patch-src_xmlrpcpp_XmlRpcServer.cpp
* - Bump PORTREVISION. lazarus has been updatedacm2015-01-113-17/+34
| | | | | | - Add QT/GTK2 OPTIONS like another lazarus app ports - Copy lazarus directory to WRKSRC is not neccesary anymore - Clean up
* Update to 20150110.kevlo2015-01-102-3/+3
|
* Re-create comms/linpskshurd2015-01-108-0/+173
| | | | Simple Qt PSK31, RTTY, and MSK31 client
* Horde package update:mm2015-01-082-3/+3
| | | | | | | | | | | | | comms/pear-Horde_ActiveSync 2.21.0 -> 2.23.1 devel/pear-Horde_Core 2.17.2 -> 2.18.1 security/pear-Horde_Crypt 2.5.1 -> 2.5.2 www/pear-Horde_Http 2.1.1 -> 2.1.2 mail/pear-Horde_Imap_Client 2.25.6 -> 2.26.0 mail/pear-Horde_Mail 2.5.0 -> 2.5.1 mail/pear-Horde_Mime 2.6.0 -> 2.6.1 devel/pear-Horde_Prefs 2.7.0 -> 2.7.1 mail/pear-Horde_Smtp 1.7.0 -> 1.8.0 devel/pear-Horde_Util 2.5.1 -> 2.5.2
* Ressurect klog - a simple QSO logger for Amateur radioshurd2015-01-074-0/+33
|
* Ressurect comms/qtel as a slave port of comms/svxlinkshurd2015-01-074-0/+45
| | | | | | | QTel is an open-source echolink client using Qt. This allows a pkg of svxlink to not require Qt, but sill allows QTel to be installed via pkg.
* Update to 14.08shurd2015-01-0728-417/+234
| | | | | | | Switch to cmake Switch to github Add the STATIC, DOCS, ALSA, and OSS options Make a master port so comms/qtel can be a slave port
* Move MASTER_SITES from CRITICAL to LOCAL/ehauptehaupt2015-01-061-1/+1
|
generated by cgit (git 2.34.1) at 2024-12-03 02:29:35 +0800